#!/usr/bin/env perl
-push(@INC,"perlasm");
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC, "${dir}perlasm", "perlasm");
require "x86asm.pl";
&asm_init($ARGV[0],"x86cpuid");
+for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
+
&function_begin("OPENSSL_ia32_cpuid");
&xor ("edx","edx");
&pushf ();
&pop ("eax");
&xor ("ecx","eax");
&bt ("ecx",21);
- &jnc (&label("nocpuid"));
+ &jnc (&label("done"));
+ &xor ("eax","eax");
+ &cpuid ();
+ &xor ("eax","eax");
+ &cmp ("ebx",0x756e6547); # "Genu"
+ &setne (&LB("eax"));
+ &mov ("ebp","eax");
+ &cmp ("edx",0x49656e69); # "ineI"
+ &setne (&LB("eax"));
+ &or ("ebp","eax");
+ &cmp ("ecx",0x6c65746e); # "ntel"
+ &setne (&LB("eax"));
+ &or ("ebp","eax");
&mov ("eax",1);
&cpuid ();
-&set_label("nocpuid");
+ &cmp ("ebp",0);
+ &jne (&label("notP4"));
+ &and (&HB("eax"),15); # familiy ID
+ &cmp (&HB("eax"),15); # P4?
+ &jne (&label("notP4"));
+ &or ("edx",1<<20); # use reserved bit to engage RC4_CHAR
+&set_label("notP4");
+ &bt ("edx",28); # test hyper-threading bit
+ &jnc (&label("done"));
+ &shr ("ebx",16);
+ &cmp (&LB("ebx"),1); # see if cache is shared(*)
+ &ja (&label("done"));
+ &and ("edx",0xefffffff); # clear hyper-threading bit if not
+&set_label("done");
&mov ("eax","edx");
&mov ("edx","ecx");
&function_end("OPENSSL_ia32_cpuid");
+# (*) on Core2 this value is set to 2 denoting the fact that L2
+# cache is shared between cores.
&external_label("OPENSSL_ia32cap_P");
&ret ();
&function_end_B("OPENSSL_rdtsc");
+# This works in Ring 0 only [read DJGPP+MS-DOS+privileged DPMI host],
+# but it's safe to call it on any [supported] 32-bit platform...
+# Just check for [non-]zero return value...
+&function_begin_B("OPENSSL_instrument_halt","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
+ &picmeup("ecx","OPENSSL_ia32cap_P");
+ &bt (&DWP(0,"ecx"),4);
+ &jnc (&label("nohalt")); # no TSC
+
+ &data_word(0x9058900e); # push %cs; pop %eax
+ &and ("eax",3);
+ &jnz (&label("nohalt")); # not enough privileges
+
+ &pushf ();
+ &pop ("eax")
+ &bt ("eax",9);
+ &jnc (&label("nohalt")); # interrupts are disabled
+
+ &rdtsc ();
+ &push ("edx");
+ &push ("eax");
+ &halt ();
+ &rdtsc ();
+
+ &sub ("eax",&DWP(0,"esp"));
+ &sbb ("edx",&DWP(4,"esp"));
+ &add ("esp",8);
+ &ret ();
+
+&set_label("nohalt");
+ &xor ("eax","eax");
+ &xor ("edx","edx");
+ &ret ();
+&function_end_B("OPENSSL_instrument_halt");
+
+# Essentially there is only one use for this function. Under DJGPP:
+#
+# #include <go32.h>
+# ...
+# i=OPENSSL_far_spin(_dos_ds,0x46c);
+# ...
+# to obtain the number of spins till closest timer interrupt.
+
+&function_begin_B("OPENSSL_far_spin");
+ &pushf ();
+ &pop ("eax")
+ &bt ("eax",9);
+ &jnc (&label("nospin")); # interrupts are disabled
+
+ &mov ("eax",&DWP(4,"esp"));
+ &mov ("ecx",&DWP(8,"esp"));
+ &data_word (0x90d88e1e); # push %ds, mov %eax,%ds
+ &xor ("eax","eax");
+ &mov ("edx",&DWP(0,"ecx"));
+ &jmp (&label("spin"));
+
+ &align (16);
+&set_label("spin");
+ &inc ("eax");
+ &cmp ("edx",&DWP(0,"ecx"));
+ &je (&label("spin"));
+
+ &data_word (0x1f909090); # pop %ds
+ &ret ();
+
+&set_label("nospin");
+ &xor ("eax","eax");
+ &xor ("edx","edx");
+ &ret ();
+&function_end_B("OPENSSL_far_spin");
+
+&function_begin_B("OPENSSL_wipe_cpu","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
+ &xor ("eax","eax");
+ &xor ("edx","edx");
+ &picmeup("ecx","OPENSSL_ia32cap_P");
+ &mov ("ecx",&DWP(0,"ecx"));
+ &bt (&DWP(0,"ecx"),1);
+ &jnc (&label("no_x87"));
+ if ($sse2) {
+ &bt (&DWP(0,"ecx"),26);
+ &jnc (&label("no_sse2"));
+ &pxor ("xmm0","xmm0");
+ &pxor ("xmm1","xmm1");
+ &pxor ("xmm2","xmm2");
+ &pxor ("xmm3","xmm3");
+ &pxor ("xmm4","xmm4");
+ &pxor ("xmm5","xmm5");
+ &pxor ("xmm6","xmm6");
+ &pxor ("xmm7","xmm7");
+ &set_label("no_sse2");
+ }
+ # just a bunch of fldz to zap the fp/mm bank followed by finit...
+ &data_word(0xeed9eed9,0xeed9eed9,0xeed9eed9,0xeed9eed9,0x90e3db9b);
+&set_label("no_x87");
+ &lea ("eax",&DWP(4,"esp"));
+ &ret ();
+&function_end_B("OPENSSL_wipe_cpu");
+
+&function_begin_B("OPENSSL_atomic_add");
+ &mov ("edx",&DWP(4,"esp")); # fetch the pointer, 1st arg
+ &mov ("ecx",&DWP(8,"esp")); # fetch the increment, 2nd arg
+ &push ("ebx");
+ &nop ();
+ &mov ("eax",&DWP(0,"edx"));
+&set_label("spin");
+ &lea ("ebx",&DWP(0,"eax","ecx"));
+ &nop ();
+ &data_word(0x1ab10ff0); # lock; cmpxchg %ebx,(%edx) # %eax is envolved and is always reloaded
+ &jne (&label("spin"));
+ &mov ("eax","ebx"); # OpenSSL expects the new value
+ &pop ("ebx");
+ &ret ();
+&function_end_B("OPENSSL_atomic_add");
+
+# This function can become handy under Win32 in situations when
+# we don't know which calling convention, __stdcall or __cdecl(*),
+# indirect callee is using. In C it can be deployed as
+#
+#ifdef OPENSSL_CPUID_OBJ
+# type OPENSSL_indirect_call(void *f,...);
+# ...
+# OPENSSL_indirect_call(func,[up to $max arguments]);
+#endif
+#
+# (*) it's designed to work even for __fastcall if number of
+# arguments is 1 or 2!
+&function_begin_B("OPENSSL_indirect_call");
+ {
+ my $i,$max=7; # $max has to be chosen as 4*n-1
+ # in order to preserve eventual
+ # stack alignment
+ &push ("ebp");
+ &mov ("ebp","esp");
+ &sub ("esp",$max*4);
+ &mov ("ecx",&DWP(12,"ebp"));
+ &mov (&DWP(0,"esp"),"ecx");
+ &mov ("edx",&DWP(16,"ebp"));
+ &mov (&DWP(4,"esp"),"edx");
+ for($i=2;$i<$max;$i++)
+ {
+ # Some copies will be redundant/bogus...
+ &mov ("eax",&DWP(12+$i*4,"ebp"));
+ &mov (&DWP(0+$i*4,"esp"),"eax");
+ }
+ &call_ptr (&DWP(8,"ebp"));# make the call...
+ &mov ("esp","ebp"); # ... and just restore the stack pointer
+ # without paying attention to what we called,
+ # (__cdecl *func) or (__stdcall *one).
+ &pop ("ebp");
+ &ret ();
+ }
+&function_end_B("OPENSSL_indirect_call");
+
+&function_begin_B("OPENSSL_cleanse");
+ &mov ("edx",&wparam(0));
+ &mov ("ecx",&wparam(1));
+ &xor ("eax","eax");
+ &cmp ("ecx",7);
+ &jae (&label("lot"));
+&set_label("little");
+ &mov (&BP(0,"edx"),"al");
+ &sub ("ecx",1);
+ &lea ("edx",&DWP(1,"edx"));
+ &jnz (&label("little"));
+ &ret ();
+
+&set_label("lot",16);
+ &test ("edx",3);
+ &jz (&label("aligned"));
+ &mov (&BP(0,"edx"),"al");
+ &lea ("ecx",&DWP(-1,"ecx"));
+ &lea ("edx",&DWP(1,"edx"));
+ &jmp (&label("lot"));
+&set_label("aligned");
+ &mov (&DWP(0,"edx"),"eax");
+ &lea ("ecx",&DWP(-4,"ecx"));
+ &test ("ecx",-4);
+ &lea ("edx",&DWP(4,"edx"));
+ &jnz (&label("aligned"));
+ &cmp ("ecx",0);
+ &jne (&label("little"));
+ &ret ();
+&function_end_B("OPENSSL_cleanse");
+
&initseg("OPENSSL_cpuid_setup");
&asm_finish();
projects / openssl.git / blobdiff