+/*
+ * Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
+ *
+ * Licensed under the OpenSSL license (the "License"). You may not use
+ * this file except in compliance with the License. You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
+ */
+
/******************************************************************************
* *
* Copyright 2014 Intel Corporation *
PRECOMP256_ROW *precomp;
void *precomp_storage;
int references;
+ CRYPTO_RWLOCK *lock;
};
/* Functions implemented in assembly */
+/*
+ * Most of below mentioned functions *preserve* the property of inputs
+ * being fully reduced, i.e. being in [0, modulus) range. Simply put if
+ * inputs are fully reduced, then output is too. Note that reverse is
+ * not true, in sense that given partially reduced inputs output can be
+ * either, not unlikely reduced. And "most" in first sentence refers to
+ * the fact that given the calculations flow one can tolerate that
+ * addition, 1st function below, produces partially reduced result *if*
+ * multiplications by 2 and 3, which customarily use addition, fully
+ * reduce it. This effectively gives two options: a) addition produces
+ * fully reduced result [as long as inputs are, just like remaining
+ * functions]; b) addition is allowed to produce partially reduced
+ * result, but multiplications by 2 and 3 perform additional reduction
+ * step. Choice between the two can be platform-specific, but it was a)
+ * in all cases so far...
+ */
+/* Modular add: res = a+b mod P */
+void ecp_nistz256_add(BN_ULONG res[P256_LIMBS],
+ const BN_ULONG a[P256_LIMBS],
+ const BN_ULONG b[P256_LIMBS]);
/* Modular mul by 2: res = 2*a mod P */
void ecp_nistz256_mul_by_2(BN_ULONG res[P256_LIMBS],
const BN_ULONG a[P256_LIMBS]);
-/* Modular div by 2: res = a/2 mod P */
-void ecp_nistz256_div_by_2(BN_ULONG res[P256_LIMBS],
- const BN_ULONG a[P256_LIMBS]);
/* Modular mul by 3: res = 3*a mod P */
void ecp_nistz256_mul_by_3(BN_ULONG res[P256_LIMBS],
const BN_ULONG a[P256_LIMBS]);
-/* Modular add: res = a+b mod P */
-void ecp_nistz256_add(BN_ULONG res[P256_LIMBS],
- const BN_ULONG a[P256_LIMBS],
- const BN_ULONG b[P256_LIMBS]);
+
+/* Modular div by 2: res = a/2 mod P */
+void ecp_nistz256_div_by_2(BN_ULONG res[P256_LIMBS],
+ const BN_ULONG a[P256_LIMBS]);
/* Modular sub: res = a-b mod P */
void ecp_nistz256_sub(BN_ULONG res[P256_LIMBS],
const BN_ULONG a[P256_LIMBS],
return is_zero(res);
}
-static BN_ULONG is_one(const BN_ULONG a[P256_LIMBS])
+static BN_ULONG is_one(const BIGNUM *z)
{
- BN_ULONG res;
-
- res = a[0] ^ ONE[0];
- res |= a[1] ^ ONE[1];
- res |= a[2] ^ ONE[2];
- res |= a[3] ^ ONE[3];
- if (P256_LIMBS == 8) {
- res |= a[4] ^ ONE[4];
- res |= a[5] ^ ONE[5];
- res |= a[6] ^ ONE[6];
+ BN_ULONG res = 0;
+ BN_ULONG *a = bn_get_words(z);
+
+ if (bn_get_top(z) == (P256_LIMBS - P256_LIMBS / 8)) {
+ res = a[0] ^ ONE[0];
+ res |= a[1] ^ ONE[1];
+ res |= a[2] ^ ONE[2];
+ res |= a[3] ^ ONE[3];
+ if (P256_LIMBS == 8) {
+ res |= a[4] ^ ONE[4];
+ res |= a[5] ^ ONE[5];
+ res |= a[6] ^ ONE[6];
+ /*
+ * no check for a[7] (being zero) on 32-bit platforms,
+ * because value of "one" takes only 7 limbs.
+ */
+ }
+ res = is_zero(res);
}
- return is_zero(res);
+ return res;
}
+/*
+ * For reference, this macro is used only when new ecp_nistz256 assembly
+ * module is being developed. For example, configure with
+ * -DECP_NISTZ256_REFERENCE_IMPLEMENTATION and implement only functions
+ * performing simplest arithmetic operations on 256-bit vectors. Then
+ * work on implementation of higher-level functions performing point
+ * operations. Then remove ECP_NISTZ256_REFERENCE_IMPLEMENTATION
+ * and never define it again. (The correct macro denoting presence of
+ * ecp_nistz256 module is ECP_NISTZ256_ASM.)
+ */
#ifndef ECP_NISTZ256_REFERENCE_IMPLEMENTATION
void ecp_nistz256_point_double(P256_POINT *r, const P256_POINT *a);
void ecp_nistz256_point_add(P256_POINT *r,
const BN_ULONG *in2_y = b->Y;
const BN_ULONG *in2_z = b->Z;
- /* We encode infinity as (0,0), which is not on the curve,
- * so it is OK. */
- in1infty = (in1_x[0] | in1_x[1] | in1_x[2] | in1_x[3] |
- in1_y[0] | in1_y[1] | in1_y[2] | in1_y[3]);
+ /*
+ * Infinity in encoded as (,,0)
+ */
+ in1infty = (in1_z[0] | in1_z[1] | in1_z[2] | in1_z[3]);
if (P256_LIMBS == 8)
- in1infty |= (in1_x[4] | in1_x[5] | in1_x[6] | in1_x[7] |
- in1_y[4] | in1_y[5] | in1_y[6] | in1_y[7]);
+ in1infty |= (in1_z[4] | in1_z[5] | in1_z[6] | in1_z[7]);
- in2infty = (in2_x[0] | in2_x[1] | in2_x[2] | in2_x[3] |
- in2_y[0] | in2_y[1] | in2_y[2] | in2_y[3]);
+ in2infty = (in2_z[0] | in2_z[1] | in2_z[2] | in2_z[3]);
if (P256_LIMBS == 8)
- in2infty |= (in2_x[4] | in2_x[5] | in2_x[6] | in2_x[7] |
- in2_y[4] | in2_y[5] | in2_y[6] | in2_y[7]);
+ in2infty |= (in2_z[4] | in2_z[5] | in2_z[6] | in2_z[7]);
in1infty = is_zero(in1infty);
in2infty = is_zero(in2infty);
const BN_ULONG *in2_y = b->Y;
/*
- * In affine representation we encode infty as (0,0), which is not on the
- * curve, so it is OK
+ * Infinity in encoded as (,,0)
*/
- in1infty = (in1_x[0] | in1_x[1] | in1_x[2] | in1_x[3] |
- in1_y[0] | in1_y[1] | in1_y[2] | in1_y[3]);
+ in1infty = (in1_z[0] | in1_z[1] | in1_z[2] | in1_z[3]);
if (P256_LIMBS == 8)
- in1infty |= (in1_x[4] | in1_x[5] | in1_x[6] | in1_x[7] |
- in1_y[4] | in1_y[5] | in1_y[6] | in1_y[7]);
+ in1infty |= (in1_z[4] | in1_z[5] | in1_z[6] | in1_z[7]);
+ /*
+ * In affine representation we encode infinity as (0,0), which is
+ * not on the curve, so it is OK
+ */
in2infty = (in2_x[0] | in2_x[1] | in2_x[2] | in2_x[3] |
in2_y[0] | in2_y[1] | in2_y[2] | in2_y[3]);
if (P256_LIMBS == 8)
}
/*
- * row[0] is implicitly (0,0,0) (the point at infinity), therefore it
- * is not stored. All other values are actually stored with an offset
- * of -1 in table.
+ * row[0] is implicitly (0,0,0) (the point at infinity), therefore it
+ * is not stored. All other values are actually stored with an offset
+ * of -1 in table.
*/
ecp_nistz256_scatter_w5 (row, &temp[0], 1);
{
return (bn_get_top(generator->X) == P256_LIMBS) &&
(bn_get_top(generator->Y) == P256_LIMBS) &&
- (bn_get_top(generator->Z) == (P256_LIMBS - P256_LIMBS / 8)) &&
is_equal(bn_get_words(generator->X), def_xG) &&
is_equal(bn_get_words(generator->Y), def_yG) &&
- is_one(bn_get_words(generator->Z));
+ is_one(generator->Z);
}
__owur static int ecp_nistz256_mult_precompute(EC_GROUP *group, BN_CTX *ctx)
} else
#endif
{
+ BN_ULONG infty;
+
/* First window */
wvalue = (p_str[0] << 1) & mask;
idx += window_size;
ecp_nistz256_neg(p.p.Z, p.p.Y);
copy_conditional(p.p.Y, p.p.Z, wvalue & 1);
- memcpy(p.p.Z, ONE, sizeof(ONE));
+ /*
+ * Since affine infinity is encoded as (0,0) and
+ * Jacobian ias (,,0), we need to harmonize them
+ * by assigning "one" or zero to Z.
+ */
+ infty = (p.p.X[0] | p.p.X[1] | p.p.X[2] | p.p.X[3] |
+ p.p.Y[0] | p.p.Y[1] | p.p.Y[2] | p.p.Y[3]);
+ if (P256_LIMBS == 8)
+ infty |= (p.p.X[4] | p.p.X[5] | p.p.X[6] | p.p.X[7] |
+ p.p.Y[4] | p.p.Y[5] | p.p.Y[6] | p.p.Y[7]);
+
+ infty = 0 - is_zero(infty);
+ infty = ~infty;
+
+ p.p.Z[0] = ONE[0] & infty;
+ p.p.Z[1] = ONE[1] & infty;
+ p.p.Z[2] = ONE[2] & infty;
+ p.p.Z[3] = ONE[3] & infty;
+ if (P256_LIMBS == 8) {
+ p.p.Z[4] = ONE[4] & infty;
+ p.p.Z[5] = ONE[5] & infty;
+ p.p.Z[6] = ONE[6] & infty;
+ p.p.Z[7] = ONE[7] & infty;
+ }
for (i = 1; i < 37; i++) {
unsigned int off = (idx - 1) / 8;
!bn_set_words(r->Z, p.p.Z, P256_LIMBS)) {
goto err;
}
- r->Z_is_one = is_one(p.p.Z) & 1;
+ r->Z_is_one = is_one(r->Z) & 1;
ret = 1;
ret->group = group;
ret->w = 6; /* default */
ret->references = 1;
+
+ ret->lock = CRYPTO_THREAD_lock_new();
+ if (ret->lock == NULL) {
+ ECerr(EC_F_ECP_NISTZ256_PRE_COMP_NEW, ERR_R_MALLOC_FAILURE);
+ OPENSSL_free(ret);
+ return NULL;
+ }
return ret;
}
NISTZ256_PRE_COMP *EC_nistz256_pre_comp_dup(NISTZ256_PRE_COMP *p)
{
+ int i;
if (p != NULL)
- CRYPTO_add(&p->references, 1, CRYPTO_LOCK_EC_PRE_COMP);
+ CRYPTO_atomic_add(&p->references, 1, &i, p->lock);
return p;
}
void EC_nistz256_pre_comp_free(NISTZ256_PRE_COMP *pre)
{
- if (pre == NULL
- || CRYPTO_add(&pre->references, -1, CRYPTO_LOCK_EC_PRE_COMP) > 0)
+ int i;
+
+ if (pre == NULL)
return;
+
+ CRYPTO_atomic_add(&pre->references, -1, &i, pre->lock);
+ REF_PRINT_COUNT("EC_nistz256", x);
+ if (i > 0)
+ return;
+ REF_ASSERT_ISNT(i < 0);
+
OPENSSL_free(pre->precomp_storage);
+ CRYPTO_THREAD_lock_free(pre->lock);
OPENSSL_free(pre);
}
ec_GFp_mont_group_set_curve,
ec_GFp_simple_group_get_curve,
ec_GFp_simple_group_get_degree,
- 0, /* group_order_bits */
+ ec_group_simple_order_bits,
ec_GFp_simple_group_check_discriminant,
ec_GFp_simple_point_init,
ec_GFp_simple_point_finish,
0, /* field_div */
ec_GFp_mont_field_encode,
ec_GFp_mont_field_decode,
- ec_GFp_mont_field_set_to_one
+ ec_GFp_mont_field_set_to_one,
+ ec_key_simple_priv2oct,
+ ec_key_simple_oct2priv,
+ 0, /* set private */
+ ec_key_simple_generate_key,
+ ec_key_simple_check_key,
+ ec_key_simple_generate_public_key,
+ 0, /* keycopy */
+ 0, /* keyfinish */
+ ecdh_simple_compute_key
};
return &ret;
projects / openssl.git / blobdiff