-/******************************************************************************
- * *
- * Copyright 2014 Intel Corporation *
- * *
- * Licensed under the Apache License, Version 2.0 (the "License"); *
- * you may not use this file except in compliance with the License. *
- * You may obtain a copy of the License at *
- * *
- * http://www.apache.org/licenses/LICENSE-2.0 *
- * *
- * Unless required by applicable law or agreed to in writing, software *
- * distributed under the License is distributed on an "AS IS" BASIS, *
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. *
- * See the License for the specific language governing permissions and *
- * limitations under the License. *
- * *
- ******************************************************************************
- * *
- * Developers and authors: *
- * Shay Gueron (1, 2), and Vlad Krasnov (1) *
- * (1) Intel Corporation, Israel Development Center *
- * (2) University of Haifa *
- * Reference: *
- * S.Gueron and V.Krasnov, "Fast Prime Field Elliptic Curve Cryptography with *
- * 256 Bit Primes" *
- * *
- ******************************************************************************/
+/*
+ * Copyright 2014-2017 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright (c) 2014, Intel Corporation. All Rights Reserved.
+ *
+ * Licensed under the OpenSSL license (the "License"). You may not use
+ * this file except in compliance with the License. You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
+ *
+ * Originally written by Shay Gueron (1, 2), and Vlad Krasnov (1)
+ * (1) Intel Corporation, Israel Development Center, Haifa, Israel
+ * (2) University of Haifa, Israel
+ *
+ * Reference:
+ * S.Gueron and V.Krasnov, "Fast Prime Field Elliptic Curve Cryptography with
+ * 256 Bit Primes"
+ */
#include <string.h>
#include "internal/cryptlib.h"
#include "internal/bn_int.h"
#include "ec_lcl.h"
+#include "internal/refcount.h"
#if BN_BITS2 != 64
# define TOBN(hi,lo) lo,hi
*/
PRECOMP256_ROW *precomp;
void *precomp_storage;
- int references;
+ CRYPTO_REF_COUNT references;
CRYPTO_RWLOCK *lock;
};
/* Functions implemented in assembly */
+/*
+ * Most of below mentioned functions *preserve* the property of inputs
+ * being fully reduced, i.e. being in [0, modulus) range. Simply put if
+ * inputs are fully reduced, then output is too. Note that reverse is
+ * not true, in sense that given partially reduced inputs output can be
+ * either, not unlikely reduced. And "most" in first sentence refers to
+ * the fact that given the calculations flow one can tolerate that
+ * addition, 1st function below, produces partially reduced result *if*
+ * multiplications by 2 and 3, which customarily use addition, fully
+ * reduce it. This effectively gives two options: a) addition produces
+ * fully reduced result [as long as inputs are, just like remaining
+ * functions]; b) addition is allowed to produce partially reduced
+ * result, but multiplications by 2 and 3 perform additional reduction
+ * step. Choice between the two can be platform-specific, but it was a)
+ * in all cases so far...
+ */
+/* Modular add: res = a+b mod P */
+void ecp_nistz256_add(BN_ULONG res[P256_LIMBS],
+ const BN_ULONG a[P256_LIMBS],
+ const BN_ULONG b[P256_LIMBS]);
/* Modular mul by 2: res = 2*a mod P */
void ecp_nistz256_mul_by_2(BN_ULONG res[P256_LIMBS],
const BN_ULONG a[P256_LIMBS]);
-/* Modular div by 2: res = a/2 mod P */
-void ecp_nistz256_div_by_2(BN_ULONG res[P256_LIMBS],
- const BN_ULONG a[P256_LIMBS]);
/* Modular mul by 3: res = 3*a mod P */
void ecp_nistz256_mul_by_3(BN_ULONG res[P256_LIMBS],
const BN_ULONG a[P256_LIMBS]);
-/* Modular add: res = a+b mod P */
-void ecp_nistz256_add(BN_ULONG res[P256_LIMBS],
- const BN_ULONG a[P256_LIMBS],
- const BN_ULONG b[P256_LIMBS]);
+
+/* Modular div by 2: res = a/2 mod P */
+void ecp_nistz256_div_by_2(BN_ULONG res[P256_LIMBS],
+ const BN_ULONG a[P256_LIMBS]);
/* Modular sub: res = a-b mod P */
void ecp_nistz256_sub(BN_ULONG res[P256_LIMBS],
const BN_ULONG a[P256_LIMBS],
return is_zero(res);
}
-static BN_ULONG is_one(const BN_ULONG a[P256_LIMBS])
+static BN_ULONG is_one(const BIGNUM *z)
{
- BN_ULONG res;
-
- res = a[0] ^ ONE[0];
- res |= a[1] ^ ONE[1];
- res |= a[2] ^ ONE[2];
- res |= a[3] ^ ONE[3];
- if (P256_LIMBS == 8) {
- res |= a[4] ^ ONE[4];
- res |= a[5] ^ ONE[5];
- res |= a[6] ^ ONE[6];
+ BN_ULONG res = 0;
+ BN_ULONG *a = bn_get_words(z);
+
+ if (bn_get_top(z) == (P256_LIMBS - P256_LIMBS / 8)) {
+ res = a[0] ^ ONE[0];
+ res |= a[1] ^ ONE[1];
+ res |= a[2] ^ ONE[2];
+ res |= a[3] ^ ONE[3];
+ if (P256_LIMBS == 8) {
+ res |= a[4] ^ ONE[4];
+ res |= a[5] ^ ONE[5];
+ res |= a[6] ^ ONE[6];
+ /*
+ * no check for a[7] (being zero) on 32-bit platforms,
+ * because value of "one" takes only 7 limbs.
+ */
+ }
+ res = is_zero(res);
}
- return is_zero(res);
+ return res;
}
+/*
+ * For reference, this macro is used only when new ecp_nistz256 assembly
+ * module is being developed. For example, configure with
+ * -DECP_NISTZ256_REFERENCE_IMPLEMENTATION and implement only functions
+ * performing simplest arithmetic operations on 256-bit vectors. Then
+ * work on implementation of higher-level functions performing point
+ * operations. Then remove ECP_NISTZ256_REFERENCE_IMPLEMENTATION
+ * and never define it again. (The correct macro denoting presence of
+ * ecp_nistz256 module is ECP_NISTZ256_ASM.)
+ */
#ifndef ECP_NISTZ256_REFERENCE_IMPLEMENTATION
void ecp_nistz256_point_double(P256_POINT *r, const P256_POINT *a);
void ecp_nistz256_point_add(P256_POINT *r,
const BN_ULONG *in2_y = b->Y;
const BN_ULONG *in2_z = b->Z;
- /* We encode infinity as (0,0), which is not on the curve,
- * so it is OK. */
- in1infty = (in1_x[0] | in1_x[1] | in1_x[2] | in1_x[3] |
- in1_y[0] | in1_y[1] | in1_y[2] | in1_y[3]);
+ /*
+ * Infinity in encoded as (,,0)
+ */
+ in1infty = (in1_z[0] | in1_z[1] | in1_z[2] | in1_z[3]);
if (P256_LIMBS == 8)
- in1infty |= (in1_x[4] | in1_x[5] | in1_x[6] | in1_x[7] |
- in1_y[4] | in1_y[5] | in1_y[6] | in1_y[7]);
+ in1infty |= (in1_z[4] | in1_z[5] | in1_z[6] | in1_z[7]);
- in2infty = (in2_x[0] | in2_x[1] | in2_x[2] | in2_x[3] |
- in2_y[0] | in2_y[1] | in2_y[2] | in2_y[3]);
+ in2infty = (in2_z[0] | in2_z[1] | in2_z[2] | in2_z[3]);
if (P256_LIMBS == 8)
- in2infty |= (in2_x[4] | in2_x[5] | in2_x[6] | in2_x[7] |
- in2_y[4] | in2_y[5] | in2_y[6] | in2_y[7]);
+ in2infty |= (in2_z[4] | in2_z[5] | in2_z[6] | in2_z[7]);
in1infty = is_zero(in1infty);
in2infty = is_zero(in2infty);
const BN_ULONG *in2_y = b->Y;
/*
- * In affine representation we encode infty as (0,0), which is not on the
- * curve, so it is OK
+ * Infinity in encoded as (,,0)
*/
- in1infty = (in1_x[0] | in1_x[1] | in1_x[2] | in1_x[3] |
- in1_y[0] | in1_y[1] | in1_y[2] | in1_y[3]);
+ in1infty = (in1_z[0] | in1_z[1] | in1_z[2] | in1_z[3]);
if (P256_LIMBS == 8)
- in1infty |= (in1_x[4] | in1_x[5] | in1_x[6] | in1_x[7] |
- in1_y[4] | in1_y[5] | in1_y[6] | in1_y[7]);
+ in1infty |= (in1_z[4] | in1_z[5] | in1_z[6] | in1_z[7]);
+ /*
+ * In affine representation we encode infinity as (0,0), which is
+ * not on the curve, so it is OK
+ */
in2infty = (in2_x[0] | in2_x[1] | in2_x[2] | in2_x[3] |
in2_y[0] | in2_y[1] | in2_y[2] | in2_y[3]);
if (P256_LIMBS == 8)
}
/* Coordinates of G, for which we have precomputed tables */
-const static BN_ULONG def_xG[P256_LIMBS] = {
+static const BN_ULONG def_xG[P256_LIMBS] = {
TOBN(0x79e730d4, 0x18a9143c), TOBN(0x75ba95fc, 0x5fedb601),
TOBN(0x79fb732b, 0x77622510), TOBN(0x18905f76, 0xa53755c6)
};
-const static BN_ULONG def_yG[P256_LIMBS] = {
+static const BN_ULONG def_yG[P256_LIMBS] = {
TOBN(0xddf25357, 0xce95560a), TOBN(0x8b4ab8e4, 0xba19e45c),
TOBN(0xd2e88688, 0xdd21f325), TOBN(0x8571ff18, 0x25885d85)
};
{
return (bn_get_top(generator->X) == P256_LIMBS) &&
(bn_get_top(generator->Y) == P256_LIMBS) &&
- (bn_get_top(generator->Z) == (P256_LIMBS - P256_LIMBS / 8)) &&
is_equal(bn_get_words(generator->X), def_xG) &&
is_equal(bn_get_words(generator->Y), def_yG) &&
- is_one(bn_get_words(generator->Z));
+ is_one(generator->Z);
}
__owur static int ecp_nistz256_mult_precompute(EC_GROUP *group, BN_CTX *ctx)
} else
#endif
{
+ BN_ULONG infty;
+
/* First window */
wvalue = (p_str[0] << 1) & mask;
idx += window_size;
ecp_nistz256_neg(p.p.Z, p.p.Y);
copy_conditional(p.p.Y, p.p.Z, wvalue & 1);
- memcpy(p.p.Z, ONE, sizeof(ONE));
+ /*
+ * Since affine infinity is encoded as (0,0) and
+ * Jacobian ias (,,0), we need to harmonize them
+ * by assigning "one" or zero to Z.
+ */
+ infty = (p.p.X[0] | p.p.X[1] | p.p.X[2] | p.p.X[3] |
+ p.p.Y[0] | p.p.Y[1] | p.p.Y[2] | p.p.Y[3]);
+ if (P256_LIMBS == 8)
+ infty |= (p.p.X[4] | p.p.X[5] | p.p.X[6] | p.p.X[7] |
+ p.p.Y[4] | p.p.Y[5] | p.p.Y[6] | p.p.Y[7]);
+
+ infty = 0 - is_zero(infty);
+ infty = ~infty;
+
+ p.p.Z[0] = ONE[0] & infty;
+ p.p.Z[1] = ONE[1] & infty;
+ p.p.Z[2] = ONE[2] & infty;
+ p.p.Z[3] = ONE[3] & infty;
+ if (P256_LIMBS == 8) {
+ p.p.Z[4] = ONE[4] & infty;
+ p.p.Z[5] = ONE[5] & infty;
+ p.p.Z[6] = ONE[6] & infty;
+ p.p.Z[7] = ONE[7] & infty;
+ }
for (i = 1; i < 37; i++) {
unsigned int off = (idx - 1) / 8;
!bn_set_words(r->Z, p.p.Z, P256_LIMBS)) {
goto err;
}
- r->Z_is_one = is_one(p.p.Z) & 1;
+ r->Z_is_one = is_one(r->Z) & 1;
ret = 1;
{
int i;
if (p != NULL)
- CRYPTO_atomic_add(&p->references, 1, &i, p->lock);
+ CRYPTO_UP_REF(&p->references, &i, p->lock);
return p;
}
if (pre == NULL)
return;
- CRYPTO_atomic_add(&pre->references, -1, &i, pre->lock);
+ CRYPTO_DOWN_REF(&pre->references, &i, pre->lock);
REF_PRINT_COUNT("EC_nistz256", x);
if (i > 0)
return;
projects / openssl.git / blobdiff