$! byer@mail.all-net.net
$!
$! Changes by Richard Levitte <richard@levitte.org>
+$! Zoltan Arpadffy <arpadffy@polarhome.com>
$!
$! This command files compiles and creates the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! library for OpenSSL. The "xxx" denotes the machine architecture of AXP
-$! or VAX.
+$! library for OpenSSL. The "xxx" denotes the machine architecture, ALPHA,
+$! IA64 or VAX.
$!
$! It was re-written so it would try to determine what "C" compiler to use
$! or you can specify which "C" compiler to use.
$! Specify the following as P1 to build just that part or ALL to just
$! build everything.
$!
-$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE
-$! ALL To do both LIBRARY and APPS
+$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
+$! ALL To do both LIBRARY and APPS
$!
$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger
$! information.
$!
$! Specify which compiler at P3 to try to compile under.
$!
-$! VAXC For VAX C.
-$! DECC For DEC C.
-$! GNUC For GNU C.
+$! VAXC For VAX C.
+$! DECC For DEC C.
+$! GNUC For GNU C.
$!
-$! If you don't speficy a compiler, it will try to determine which
+$! If you don't specify a compiler, it will try to determine which
$! "C" compiler to use.
$!
$! P4, if defined, sets a TCP/IP library to use, through one of the following
$! keywords:
$!
-$! UCX for UCX
-$! TCPIP for TCPIP (post UCX)
-$! SOCKETSHR for SOCKETSHR+NETLIB
+$! UCX For UCX
+$! TCPIP For TCPIP (post UCX)
+$! SOCKETSHR For SOCKETSHR+NETLIB
$!
$! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
$!
$! WARNING: this should only be done to recompile some part of an already
$! fully compiled library.
$!
+$! P7, if defined, specifies the C pointer size. Ignored on VAX.
+$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$! Supported values are:
+$!
+$! "" Compile with default (/NOPOINTER_SIZE)
+$! 32 Compile with /POINTER_SIZE=32 (SHORT)
+$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
+$! (Automatically select ARGV if compiler supports it.)
+$! 64= Compile with /POINTER_SIZE=64 (LONG).
+$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
+$!
+$! P8, if defined, specifies a directory where ZLIB files (zlib.h,
+$! libz.olb) may be found. Optionally, a non-default object library
+$! name may be included ("dev:[dir]libz_64.olb", for example).
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+ f$parse( proc, , , "name")+ f$parse( proc, , , "type")
$!
$! Define A TCP/IP Library That We Will Need To Link To.
$! (That Is, If We Need To Link To One.)
$!
$ TCPIP_LIB = ""
+$ ZLIB_LIB = ""
$!
$! Check Which Architecture We Are Using.
$!
-$ IF (F$GETSYI("CPU").GE.128)
+$ IF (F$GETSYI("CPU").LT.128)
$ THEN
$!
-$! The Architecture Is AXP
+$! The Architecture Is VAX
$!
-$ ARCH := AXP
+$ ARCH = "VAX"
$!
$! Else...
$!
$ ELSE
$!
-$! The Architecture Is VAX.
+$! The Architecture Is Alpha, IA64 or whatever comes in the future.
$!
-$ ARCH := VAX
+$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
$!
$! End The Architecture Check.
$!
$ ENDIF
$!
-$! Define The Different Encryption Types.
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ OPT_FILE = ""
+$ POINTER_SIZE = ""
+$!
+$! Check if there's a SDIRS variable defined
+$!
+$ IF "''SDIRS'" .NES. ""
+$ THEN
+$!
+$! If SDIRS was defined, define ENCRYPT_TYPES from it
$!
-$ ENCRYPT_TYPES = "Basic,"+ -
- "OBJECTS,"+ -
- "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ -
- "DES,RC2,RC4,RC5,IDEA,BF,CAST,"+ -
- "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,AES,"+ -
- "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
- "EVP,EVP_2,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
- "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
- "STORE,PQUEUE"
+$ ENCRYPT_TYPES = "Basic,''SDIRS'"
+$!
+$! Otherwise
+$!
+$ ELSE
+$!
+$! Define The Different Encryption Types.
+$! NOTE: Some might think this list ugly. However, it's made this way to
+$! reflect the SDIRS variable in [-]Makefile.org as closely as possible,
+$! thereby making it fairly easy to verify that the lists are the same.
+$!
+$ ET_WHIRLPOOL = "WHRLPOOL"
+$ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
+$ ENCRYPT_TYPES = "Basic,"+ -
+ "OBJECTS,"+ -
+ "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
+ "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
+ "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
+ "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
+ "EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
+ "CMS,PQUEUE,TS,JPAKE,SRP,STORE,CMAC"
+$ ENDIF
$!
$! Check To Make Sure We Have Valid Command Line Parameters.
$!
$ GOSUB CHECK_OPTIONS
$!
+$! Define The OBJ and EXE Directories.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.CRYPTO]
+$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]
+$!
+$! Specify the destination directory in any /MAP option.
+$!
+$ if (LINKMAP .eqs. "MAP")
+$ then
+$ LINKMAP = LINKMAP+ "=''EXE_DIR'"
+$ endif
+$!
+$! Add the location prefix to the linker options file name.
+$!
+$ if (OPT_FILE .nes. "")
+$ then
+$ OPT_FILE = EXE_DIR+ OPT_FILE
+$ endif
+$!
$! Initialise logical names and such
$!
$ GOSUB INITIALISE
$!
$! Tell The User What Kind of Machine We Run On.
$!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
-$!
-$! Define The OBJ Directory.
+$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.CRYPTO]
$!
$! Check To See If The Architecture Specific OBJ Directory Exists.
$!
$!
$ ENDIF
$!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]
-$!
$! Check To See If The Architecture Specific Directory Exists.
$!
$ IF (F$PARSE(EXE_DIR).EQS."")
$!
$! Define The Library Name.
$!
-$ LIB_NAME := 'EXE_DIR'LIBCRYPTO.OLB
+$ LIB_NAME := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB
$!
$! Define The CRYPTO-LIB We Are To Use.
$!
-$ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO.OLB
+$ CRYPTO_LIB := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB
$!
$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library...
$!
$!
$! Define The Different Encryption "library" Strings.
$!
-$ APPS_DES = "DES/DES,CBC3_ENC"
-$ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
-$
-$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,tmdiff,cpt_err,ebcdic,uid,o_time,o_str,o_dir"
+$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,"+ -
+ "ebcdic,uid,o_time,o_str,o_dir,thr_id,lock,fips_ers,"+ -
+ "o_init,o_fips"
+$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
$ LIB_MD2 = "md2_dgst,md2_one"
$ LIB_MD4 = "md4_dgst,md4_one"
$ LIB_MD5 = "md5_dgst,md5_one"
-$ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one,sha256,sha512"
+$ LIB_SHA = "sha1dgst,sha1_one,sha256,sha512"
$ LIB_MDC2 = "mdc2dgst,mdc2_one"
-$ LIB_HMAC = "hmac"
+$ LIB_HMAC = "hmac,hm_ameth,hm_pmeth"
$ LIB_RIPEMD = "rmd_dgst,rmd_one"
+$ LIB_WHRLPOOL = "wp_dgst,wp_block"
$ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ -
"ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ -
"enc_read,enc_writ,ofb64enc,"+ -
"ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ -
"des_enc,fcrypt_b,"+ -
"fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
- "ede_cbcm_enc,des_old,des_old2,read2pwd"
+ "read2pwd"
+$ LIB_AES = "aes_misc,aes_ecb,aes_cfb,aes_ofb,aes_ige,aes_wrap,"+ -
+ "aes_core,aes_cbc"
$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
-$ LIB_RC4 = "rc4_skey,rc4_enc"
+$ LIB_RC4 = "rc4_enc,rc4_skey"
$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
$ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey"
$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
+$ LIB_CAMELLIA = "cmll_ecb,cmll_ofb,cmll_cfb,cmll_ctr,camellia,cmll_misc,cmll_cbc"
+$ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
+$ LIB_MODES = "cbc128,ctr128,cts128,cfb128,ofb128,gcm128,"+ -
+ "ccm128,xts128,wrap128,ocb128"
$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
-$ IF F$TRNLNM("OPENSSL_NO_ASM").OR.ARCH.EQS."AXP" THEN LIB_BN_ASM = "bn_asm"
+$ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN -
+ LIB_BN_ASM = "bn_asm"
$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ -
"bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ -
"bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ -
"bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ -
- "bn_depr"
+ "bn_depr,bn_const,bn_x931p,bn_intern,bn_dh,bn_srp"
$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ -
"ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ -
- "ec2_smpl,ec2_mult"
+ "ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn,"+ -
+ "ecp_nistp224,ecp_nistp256,ecp_nistp521,ecp_nistputil,"+ -
+ "ecp_oct,ec2_oct,ec_oct"
$ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ -
"rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ -
- "rsa_asn1,rsa_depr"
+ "rsa_pss,rsa_x931,rsa_asn1,rsa_depr,rsa_ameth,rsa_prn,"+ -
+ "rsa_pmeth,rsa_crpt,rsa_x931g"
$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,"+ -
- "dsa_err,dsa_ossl,dsa_depr"
+ "dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn"
$ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err"
-$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr"
-$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err"
+$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ -
+ "dh_ameth,dh_pmeth,dh_prn,dh_rfc5114,dh_kdf"
+$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err,ech_kdf"
$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
"dso_openssl,dso_win32,dso_vms"
$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
"eng_table,eng_pkey,eng_fat,eng_all,"+ -
"tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ -
- "tb_cipher,tb_digest,"+ -
- "eng_openssl,eng_dyn,eng_cnf,eng_cryptodev,eng_padlock"
-$ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,aes_ctr"
-$ LIB_BUFFER = "buffer,buf_err"
+ "tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ -
+ "eng_openssl,eng_cnf,eng_dyn,eng_cryptodev,"+ -
+ "eng_rdrand"
+$ LIB_BUFFER = "buffer,buf_str,buf_err"
$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
"bss_mem,bss_null,bss_fd,"+ -
"bss_file,bss_sock,bss_conn,"+ -
"bf_null,bf_buff,b_print,b_dump,"+ -
- "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ -
- "bf_lbuf"
+ "b_sock,bss_acpt,bf_nbio,bss_log,bss_bio,"+ -
+ "bss_dgram,"+ -
+ "bf_lbuf,bss_rtcp" ! The last two are VMS specific
$ LIB_STACK = "stack"
$ LIB_LHASH = "lhash,lh_stats"
$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
- "rand_vms"
+ "rand_win,rand_unix,rand_vms,rand_os2,rand_nw"
$ LIB_ERR = "err,err_all,err_prn"
-$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err"
-$ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,"+ -
- "e_des,e_bf,e_idea,e_des3,"+ -
- "e_rc4,e_aes,names,"+ -
+$ LIB_EVP_1 = "encode,digest,evp_enc,evp_key,evp_acnf,evp_cnf,"+ -
+ "e_des,e_bf,e_idea,e_des3,e_camellia,"+ -
+ "e_rc4,e_aes,names,e_seed,"+ -
"e_xcbc_d,e_rc2,e_cast,e_rc5"
-$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1," + -
- "m_dss,m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
+$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha1,m_wp," + -
+ "m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
"p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ -
"bio_md,bio_b64,bio_enc,evp_err,e_null,"+ -
"c_all,c_allc,c_alld,evp_lib,bio_ok,"+-
"evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
-$ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
+$ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn,m_sigver,"+ -
+ "e_aes_cbc_hmac_sha1,e_aes_cbc_hmac_sha256,e_rc4_hmac_md5"
+$ LIB_ASN1_1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
"a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ -
"a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ -
"x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ -
"x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ -
- "d2i_pu,d2i_pr,i2d_pu,i2d_pr"
+ "x_nx509,d2i_pu,d2i_pr,i2d_pu,i2d_pr"
$ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ -
"tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ -
+ "tasn_prn,tasn_scn,ameth_lib,"+ -
"f_int,f_string,n_pkey,"+ -
- "f_enum,a_hdr,x_pkey,a_bool,x_exten,"+ -
- "asn1_gen,asn1_par,asn1_lib,asn1_err,a_meth,a_bytes,a_strnid,"+ -
- "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid"
+ "f_enum,x_pkey,a_bool,x_exten,bio_asn1,bio_ndef,asn_mime,"+ -
+ "asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ -
+ "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid,"+ -
+ "asn_mstbl"
$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ -
- "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey"
+ "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt"
$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ -
"x509_obj,x509_req,x509spki,x509_vfy,"+ -
"x509_set,x509cset,x509rset,x509_err,"+ -
"v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ -
"v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ -
"v3_ocsp,v3_akeya,v3_pmaps,v3_pcons,v3_ncons,v3_pcia,v3_pci,"+ -
- "pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib"
+ "pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib,"+ -
+ "v3_asid,v3_addr,v3_scts"
$ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall,conf_sap"
$ LIB_TXT_DB = "txt_db"
$ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ -
- "pk7_mime"
+ "pk7_mime,bio_pk7"
$ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ -
"p12_init,p12_key,p12_kiss,p12_mutl,"+ -
"p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e"
"c_rle,c_zlib"
$ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ -
"ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err"
-$ LIB_UI_COMPAT = ",ui_compat"
-$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"+LIB_UI_COMPAT
+$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"
$ LIB_KRB5 = "krb5_asn"
-$ LIB_STORE = "str_err,str_lib,str_meth,str_mem"
+$ LIB_CMS = "cms_lib,cms_asn1,cms_att,cms_io,cms_smime,cms_err,"+ -
+ "cms_sd,cms_dd,cms_cd,cms_env,cms_enc,cms_ess,"+ -
+ "cms_pwri,cms_kari"
$ LIB_PQUEUE = "pqueue"
+$ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ -
+ "ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ -
+ "ts_asn1"
+$ LIB_JPAKE = "jpake,jpake_err"
+$ LIB_SRP = "srp_lib,srp_vfy"
+$ LIB_STORE = "str_err,str_lib,str_meth,str_mem"
+$ LIB_CMAC = "cmac,cm_ameth,cm_pmeth"
$!
$! Setup exceptional compilations
$!
+$ CC3_SHOWN = 0
+$ CC4_SHOWN = 0
+$ CC5_SHOWN = 0
+$ CC6_SHOWN = 0
+$!
+$! The following lists must have leading and trailing commas, and no
+$! embedded spaces. (They are scanned for ",name,".)
+$!
+$ ! Add definitions for no threads on OpenVMS 7.1 and higher.
$ COMPILEWITH_CC3 = ",bss_rtcp,"
-$ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time,o_dir"
+$ ! Disable the DOLLARID warning. Not needed with /STANDARD=RELAXED.
+$ COMPILEWITH_CC4 = "" !!! ",a_utctm,bss_log,o_time,o_dir,"
+$ ! Disable disjoint optimization on VAX with DECC.
$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + -
- "sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
+ "seed,sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
+$ ! Disable the MIXLINKAGE warning.
+$ COMPILEWITH_CC6 = "" !!! ",enc_read,set_key,"
$!
$! Figure Out What Other Modules We Are To Build.
$!
$! Extract The Module Name From The Encryption List.
$!
$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES)
-$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
-$ MODULE_NAME1 = MODULE_NAME
$!
$! Check To See If We Are At The End Of The Module List.
$!
$! Increment The Moudle Counter.
$!
$ MODULE_COUNTER = MODULE_COUNTER + 1
+$
+$ IF MODULE_NAME.EQS."" THEN GOTO MODULE_NEXT
+$ MODULE_NAME1 = MODULE_NAME
+$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
$!
-$! Create The Library and Apps Module Names.
+$! Check if the library module name actually is defined
$!
-$ LIB_MODULE = "LIB_" + MODULE_NAME
-$ APPS_MODULE = "APPS_" + MODULE_NAME
-$ IF (MODULE_NAME.EQS."ASN1_2")
-$ THEN
-$ MODULE_NAME = "ASN1"
-$ ENDIF
-$ IF (MODULE_NAME.EQS."EVP_2")
+$ PART_COUNTER = -1
+$ IF F$TYPE(LIB_'MODULE_NAME'_1) .NES. ""
$ THEN
-$ MODULE_NAME = "EVP"
+$ PART_COUNTER = 1
+$ ELSE
+$ IF F$TYPE(LIB_'MODULE_NAME') .EQS. ""
+$ THEN
+$ WRITE SYS$ERROR ""
+$ WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist. Continuing..."
+$ WRITE SYS$ERROR ""
+$ GOTO MODULE_NEXT
+$ ENDIF
$ ENDIF
$!
-$! Set state (can be LIB and APPS)
+$! Tell The User What Module We Are Building.
$!
-$ STATE = "LIB"
-$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS"
+$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,")"
$!
-$! Check if the library module name actually is defined
+$! Create The Library Module Names.
$!
-$ IF F$TYPE('LIB_MODULE') .EQS. ""
+$ PART_NEXT:
+$ IF PART_COUNTER .EQ. 0 THEN GOTO MODULE_NEXT
+$
+$ IF PART_COUNTER .LT. 0
$ THEN
-$ WRITE SYS$ERROR ""
-$ WRITE SYS$ERROR "The module ",MODULE_NAME," does not exist. Continuing..."
-$ WRITE SYS$ERROR ""
-$ GOTO MODULE_NEXT
+$ LIB_MODULE = "LIB_" + MODULE_NAME
+$ ELSE
+$ LIB_MODULE = "LIB_" + MODULE_NAME + "_''PART_COUNTER'"
$ ENDIF
$!
-$! Top Of The Module Loop.
+$! If there are no more parts, go to the next module
$!
-$ MODULE_AGAIN:
+$ IF F$TYPE('LIB_MODULE') .EQS. "" THEN GOTO MODULE_NEXT
$!
-$! Tell The User What Module We Are Building.
+$! Increment The Counter.
$!
-$ IF (MODULE_NAME1.NES."")
-$ THEN
-$ IF STATE .EQS. "LIB"
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")"
-$ ELSE IF F$TYPE('APPS_MODULE') .NES. ""
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")"
-$ ENDIF
-$ ENDIF
-$ ENDIF
+$ PART_COUNTER = PART_COUNTER + 1
$!
$! Define A File Counter And Set It To "0".
$!
$ FILE_COUNTER = 0
-$ APPLICATION = ""
-$ APPLICATION_COUNTER = 0
$!
$! Top Of The File Loop.
$!
$ NEXT_FILE:
$!
-$! Look in the LIB_MODULE is we're in state LIB
-$!
-$ IF STATE .EQS. "LIB"
-$ THEN
-$!
-$! O.K, Extract The File Name From The File List.
+$! Extract The File Name From The File List.
$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
-$!
-$! else
-$!
-$ ELSE
-$ FILE_NAME = ","
-$!
-$ IF F$TYPE('APPS_MODULE') .NES. ""
-$ THEN
-$!
-$! Extract The File Name From The File List.
-$! This part is a bit more complicated.
-$!
-$ IF APPLICATION .EQS. ""
-$ THEN
-$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
-$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
-$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
-$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
-$ FILE_COUNTER = 0
-$ ENDIF
-$
-$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
-$! SHOW SYMBOL APPLICATION*
-$!
-$ IF APPLICATION .NES. ";"
-$ THEN
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS)
-$ IF FILE_NAME .EQS. ","
-$ THEN
-$ APPLICATION = ""
-$ GOTO NEXT_FILE
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ ENDIF
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
$!
$! Check To See If We Are At The End Of The File List.
$!
$ IF (FILE_NAME.EQS.",")
$ THEN
$!
-$! We Are At The End Of The File List, Change State Or Goto FILE_DONE.
+$! We Are At The End Of The File List, Goto FILE_DONE.
$!
-$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY"
-$ THEN
-$ STATE = "APPS"
-$ GOTO MODULE_AGAIN
-$ ELSE
-$ GOTO FILE_DONE
-$ ENDIF
+$ GOTO FILE_DONE
$!
$! End The File List Check.
$!
$!
$! Tell The User We Are Compiling The File.
$!
-$ IF (MODULE_NAME.EQS."")
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")"
-$ ENDIF
-$ IF (MODULE_NAME.NES."")
-$ THEN
-$ WRITE SYS$OUTPUT " ",FILE_NAME,""
-$ ENDIF
+$ WRITE SYS$OUTPUT " ",FILE_NAME,""
$!
$! Compile The File.
$!
$ ON ERROR THEN GOTO NEXT_FILE
-$ FILE_NAME0 = F$ELEMENT(0,".",FILE_NAME)
+$ FILE_NAME0 = ","+ F$ELEMENT(0,".",FILE_NAME)+ ","
$ IF FILE_NAME - ".mar" .NES. FILE_NAME
$ THEN
$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
$ ELSE
$ IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3
$ THEN
+$ write sys$output " \Using special rule (3)"
+$ if (.not. CC3_SHOWN)
+$ then
+$ CC3_SHOWN = 1
+$ x = " "+ CC3
+$ write /symbol sys$output x
+$ endif
$ CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
$ ELSE
$ IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4
$ THEN
+$ write /symbol sys$output " \Using special rule (4)"
+$ if (.not. CC4_SHOWN)
+$ then
+$ CC4_SHOWN = 1
+$ x = " "+ CC4
+$ write /symbol sys$output x
+$ endif
$ CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
$ ELSE
-$ IF COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5
+$ IF CC5_DIFFERENT .AND. -
+ (COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5)
$ THEN
+$ write sys$output " \Using special rule (5)"
+$ if (.not. CC5_SHOWN)
+$ then
+$ CC5_SHOWN = 1
+$ x = " "+ CC5
+$ write /symbol sys$output x
+$ endif
$ CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
$ ELSE
-$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6
+$ THEN
+$ write sys$output " \Using special rule (6)"
+$ if (.not. CC6_SHOWN)
+$ then
+$ CC6_SHOWN = 1
+$ x = " "+ CC6
+$ write /symbol sys$output x
+$ endif
+$ CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ENDIF
$ ENDIF
$ ENDIF
$ ENDIF
$ ENDIF
-$ IF STATE .EQS. "LIB"
-$ THEN
$!
-$! Add It To The Library.
+$! Add It To The Library.
$!
-$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
+$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
$!
-$! Time To Clean Up The Object File.
+$! Time To Clean Up The Object File.
$!
-$ DELETE 'OBJECT_FILE';*
-$ ENDIF
+$ DELETE 'OBJECT_FILE';*
$!
$! Go Back And Do It Again.
$!
$!
$ FILE_DONE:
$!
-$! Time To Build Some Applications
-$!
-$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY"
-$ THEN
-$ APPLICATION_COUNTER = 0
-$ NEXT_APPLICATION:
-$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
-$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE
-$
-$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
-$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
-$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
-$
-$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
-$! SHOW SYMBOL APPLICATION*
-$!
-$! Tell the user what happens
-$!
-$ WRITE SYS$OUTPUT " ",APPLICATION,".exe"
-$!
-$! Link The Program.
-$!
-$ ON ERROR THEN GOTO NEXT_APPLICATION
+$! Go Back And Get The Next Part.
$!
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
-$!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
-$!
-$! Link With A TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
- 'OBJ_DIR''APPLICATION_OBJECTS', -
- 'CRYPTO_LIB'/LIBRARY, -
- 'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Don't Link With A TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
- 'OBJ_DIR''APPLICATION_OBJECTS',-
- 'CRYPTO_LIB'/LIBRARY, -
- 'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$ ENDIF
-$ GOTO NEXT_APPLICATION
-$ APPLICATION_DONE:
-$ ENDIF
-$!
-$! Go Back And Get The Next Module.
-$!
-$ GOTO MODULE_NEXT
+$ GOTO PART_NEXT
$!
$! All Done With This Module.
$!
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
+! Default System Options File To Link Against
! The Sharable VAX C Runtime Library.
!
SYS$SHARE:VAXCRTL.EXE/SHARE
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
+! Default System Options File To Link Against
! The Sharable C Runtime Library.
!
GNU_CC:[000000]GCCLIB/LIBRARY
$ IF (F$SEARCH(OPT_FILE).EQS."")
$ THEN
$!
-$! Figure Out If We Need An AXP Or A VAX Linker Option File.
+$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
$!
$ IF ARCH .EQS. "VAX"
$ THEN
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
+! Default System Options File To Link Against
! The Sharable DEC C Runtime Library.
!
SYS$SHARE:DECC$SHR.EXE/SHARE
$!
$ ELSE
$!
-$! Create The AXP Linker Option File.
+$! Create The non-VAX Linker Option File.
$!
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File For AXP To Link Agianst
+! Default System Options File For non-VAX To Link Against
! The Sharable C Runtime Library.
!
SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
SYS$SHARE:CMA$OPEN_RTL/SHARE
$EOD
$!
-$! End The VAX/AXP DEC C Option File Check.
+$! End The DEC C Option File Check.
$!
$ ENDIF
$!
$!
$! Tell The User What Linker Option File We Are Using.
$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
+$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
$!
$! Time To RETURN.
$!
$!
$ ELSE
$!
-$! Else, Check To See If P1 Has A Valid Arguement.
+$! Else, Check To See If P1 Has A Valid Argument.
$!
-$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS")
+$ IF (P1.EQS."LIBRARY")
$ THEN
$!
-$! A Valid Arguement.
+$! A Valid Argument.
$!
$ BUILDALL = P1
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs."
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " AXP : Alpha Architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
+$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture."
+$ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
$ EXIT
$!
-$! End The Valid Arguement Check.
+$! End The Valid Argument Check.
$!
$ ENDIF
$!
$ IF (P2.EQS."NODEBUG")
$ THEN
$!
-$! P2 Is NODEBUG, So Compile Without The Debugger Information.
+$! P2 Is NODEBUG, So Compile Without The Debugger Information.
$!
-$ DEBUGGER = "NODEBUG"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ MACRO_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$ DEBUGGER = "NODEBUG"
+$ LINKMAP = "NOMAP"
+$ TRACEBACK = "NOTRACEBACK"
+$ GCC_OPTIMIZE = "OPTIMIZE"
+$ CC_OPTIMIZE = "OPTIMIZE"
+$ MACRO_OPTIMIZE = "OPTIMIZE"
+$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
$ ELSE
$!
$! Check To See If We Are To Compile With Debugger Information.
$! Compile With Debugger Information.
$!
$ DEBUGGER = "DEBUG"
+$ LINKMAP = "MAP"
$ TRACEBACK = "TRACEBACK"
$ GCC_OPTIMIZE = "NOOPTIMIZE"
$ CC_OPTIMIZE = "NOOPTIMIZE"
$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
$ ELSE
$!
-$! They Entered An Invalid Option..
+$! They Entered An Invalid Option.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
$!
$ EXIT
$!
-$! End The Valid Arguement Check.
+$! End The Valid Argument Check.
$!
$ ENDIF
$!
$!
$ ENDIF
$!
+$! Check P7 (POINTER_SIZE).
+$!
+$ IF (P7 .NES. "") .AND. (ARCH .NES. "VAX")
+$ THEN
+$!
+$ IF (P7 .EQS. "32")
+$ THEN
+$ POINTER_SIZE = " /POINTER_SIZE=32"
+$ ELSE
+$ POINTER_SIZE = F$EDIT( P7, "COLLAPSE, UPCASE")
+$ IF ((POINTER_SIZE .EQS. "64") .OR. -
+ (POINTER_SIZE .EQS. "64=") .OR. -
+ (POINTER_SIZE .EQS. "64=ARGV"))
+$ THEN
+$ ARCHD = ARCH+ "_64"
+$ LIB32 = ""
+$ POINTER_SIZE = " /POINTER_SIZE=64"
+$ ELSE
+$!
+$! Tell The User Entered An Invalid Option.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", P7, -
+ " Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT -
+ " """" : Compile with default (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 32 : Compile with 32-bit (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64= : Compile with 64-bit (long) pointers (no ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$ ENDIF
+$!
+$ ENDIF
+$!
+$! End The P7 (POINTER_SIZE) Check.
+$!
+$ ENDIF
+$!
+$! Set basic C compiler /INCLUDE directories.
+$!
+$ CC_INCLUDES = "SYS$DISK:[.''ARCHD'],SYS$DISK:[],SYS$DISK:[-],"+ -
+ "SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1],"+ -
+ "SYS$DISK:[.MODES]"
+$!
$! Check To See If P3 Is Blank.
$!
$ IF (P3.EQS."")
$!
$! Check To See If We Have VAXC Or DECC.
$!
-$ IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
$ THEN
$!
$! Looks Like DECC, Set To Use DECC.
$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
$ CCEXTRAFLAGS = ""
$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
+$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
$!
-$! Check To See If The User Entered A Valid Paramter.
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P8
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$! Check for expected ZLIB files.
+$!
+$ err = 0
+$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$ if (f$search( file1) .eqs. "")
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
+$ err = 1
+$ endif
+$ file1 = f$parse( "A.;", ZLIB)- "A.;"
+$!
+$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$ if (f$search( file2) .eqs. "")
+$ then
+$ if (err .eq. 0)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ endif
+$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
+$ WRITE SYS$OUTPUT ""
+$ err = err+ 2
+$ endif
+$ if (err .eq. 1)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ endif
+$!
+$ if (err .ne. 0)
+$ then
+$ EXIT
+$ endif
+$!
+$ CCDEFS = """ZLIB=1"", "+ CCDEFS
+$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1
+$ ZLIB_LIB = ", ''file2' /library"
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
+$! Check To See If The User Entered A Valid Parameter.
$!
$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
$ THEN
$ CC = "CC"
$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
THEN CC = "CC/DECC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
- "/NOLIST/PREFIX=ALL" + -
- "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP])" + -
- CCEXTRAFLAGS
+$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
+ "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
+ " /INCLUDE=(''CC_INCLUDES')"+ -
+ CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
-$ OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT"
+$ OPT_FILE = "VAX_DECC_OPTIONS.OPT"
$!
$! End DECC Check.
$!
$! Compile Using VAXC.
$!
$ CC = "CC"
-$ IF ARCH.EQS."AXP"
+$ IF ARCH.NES."VAX"
$ THEN
-$ WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
+$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
$ EXIT
$ ENDIF
$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
+ "/INCLUDE=(''CC_INCLUDES')"+ -
CCEXTRAFLAGS
$ CCDEFS = """VAXC""," + CCDEFS
$!
$!
$! Define The Linker Options File Name.
$!
-$ OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT"
+$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
$!
$! End VAXC Check
$!
$! Use GNU C...
$!
$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
+ "/INCLUDE=(''CC_INCLUDES')"+ -
CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
-$ OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT"
+$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
$!
$! End The GNU C Check.
$!
$ IF CCDISABLEWARNINGS .EQS. ""
$ THEN
$ CC4DISABLEWARNINGS = "DOLLARID"
+$ CC6DISABLEWARNINGS = "MIXLINKAGE"
$ ELSE
$ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID"
-$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$ CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE"
+$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
$ ENDIF
-$ CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
+$ CC4DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
+$ CC6DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))"
$ ELSE
$ CCDISABLEWARNINGS = ""
$ CC4DISABLEWARNINGS = ""
+$ CC6DISABLEWARNINGS = ""
$ ENDIF
-$ CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ CC3 = CC + " /DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
+$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG"
$ THEN
-$ CC5 = CC + "/OPTIMIZE=NODISJOINT"
+$ CC5 = CC + " /OPTIMIZE=NODISJOINT"
+$ CC5_DIFFERENT = 1
$ ELSE
-$ CC5 = CC + "/NOOPTIMIZE"
+$ CC5 = CC
+$ CC5_DIFFERENT = 0
$ ENDIF
$ CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS
+$ CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS
$!
$! Show user the result
$!
$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
$!
-$! Else The User Entered An Invalid Arguement.
+$! Else The User Entered An Invalid Argument.
$!
$ ELSE
$!
$!
$ EXIT
$!
-$! End The Valid Arguement Check.
+$! End The Valid Argument Check.
$!
$ ENDIF
$!
$! Build a MACRO command for the architecture at hand
$!
$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
-$ IF ARCH .EQS. "AXP" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
+$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
$!
$! Show user the result
$!
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
$!
$! Done with SOCKETSHR
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
$ THEN
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
$ ELSE
$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
$ ENDIF
$!
$! Done with UCX
$!
$! Set the library to use TCPIP (post UCX).
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
$!
$! Done with TCPIP
$!
$!
$! Print info
$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
$!
-$! Else The User Entered An Invalid Arguement.
+$! Else The User Entered An Invalid Argument.
$!
$ ELSE
$!
$ __HERE = F$EDIT(__HERE,"UPCASE")
$ __TOP = __HERE - "CRYPTO]"
$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
+$ __INTERNAL = __TOP + "CRYPTO.INCLUDE.INTERNAL]"
$!
$! Set up the logical name OPENSSL to point at the include directory
$!
$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$ DEFINE INTERNAL/NOLOG '__INTERNAL'
$!
$! Done
$!
$ IF __SAVE_OPENSSL .EQS. ""
$ THEN
$ DEASSIGN OPENSSL
+$ DEASSIGN INTERNAL
$ ELSE
$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
$ ENDIF
projects / openssl.git / blobdiff