* [including the GNU Public Licence.]
*/
+#ifndef BN_DEBUG
+# undef NDEBUG /* avoid conflicting definitions */
+# define NDEBUG
+#endif
+
+#include <assert.h>
#include <stdio.h>
#include "cryptlib.h"
#include "bn_lcl.h"
if (a->top == 0) return(0);
l=a->d[a->top-1];
+ assert(l != 0);
i=(a->top-1)*BN_BITS2;
- if (l == 0)
- {
-#if !defined(NO_STDIO) && !defined(WIN16)
- fprintf(stderr,"BAD TOP VALUE\n");
-#endif
- abort();
- }
return(i+BN_num_bits_word(l));
}
return(ret);
}
-/* This is an internal function that should not be used in applications.
- * It ensures that 'b' has enough room for a 'words' word number number.
- * It is mostly used by the various BIGNUM routines. If there is an error,
- * NULL is returned. If not, 'b' is returned. */
-
-BIGNUM *bn_expand2(BIGNUM *b, int words)
+/* This is used both by bn_expand2() and bn_dup_expand() */
+/* The caller MUST check that words > b->dmax before calling this */
+static BN_ULONG *internal_bn_expand(const BIGNUM *b, int words)
{
- BN_ULONG *A,*a;
+ BN_ULONG *A,*a = NULL;
const BN_ULONG *B;
int i;
- bn_check_top(b);
-
- if (words > b->dmax)
+ bn_check_top(b);
+ if (BN_get_flags(b,BN_FLG_STATIC_DATA))
{
- bn_check_top(b);
- if (BN_get_flags(b,BN_FLG_STATIC_DATA))
- {
- BNerr(BN_F_BN_EXPAND2,BN_R_EXPAND_ON_STATIC_BIGNUM_DATA);
- return(NULL);
- }
- a=A=(BN_ULONG *)OPENSSL_malloc(sizeof(BN_ULONG)*(words+1));
- if (A == NULL)
- {
- BNerr(BN_F_BN_EXPAND2,ERR_R_MALLOC_FAILURE);
- return(NULL);
- }
+ BNerr(BN_F_BN_EXPAND2,BN_R_EXPAND_ON_STATIC_BIGNUM_DATA);
+ return(NULL);
+ }
+ a=A=(BN_ULONG *)OPENSSL_malloc(sizeof(BN_ULONG)*(words+1));
+ if (A == NULL)
+ {
+ BNerr(BN_F_BN_EXPAND2,ERR_R_MALLOC_FAILURE);
+ return(NULL);
+ }
#if 1
- B=b->d;
- /* Check if the previous number needs to be copied */
- if (B != NULL)
- {
+ B=b->d;
+ /* Check if the previous number needs to be copied */
+ if (B != NULL)
+ {
#if 0
- /* This lot is an unrolled loop to copy b->top
- * BN_ULONGs from B to A
- */
+ /* This lot is an unrolled loop to copy b->top
+ * BN_ULONGs from B to A
+ */
/*
* I have nothing against unrolling but it's usually done for
* several reasons, namely:
*
* <appro@fy.chalmers.se>
*/
- for (i=b->top&(~7); i>0; i-=8)
- {
- A[0]=B[0]; A[1]=B[1]; A[2]=B[2]; A[3]=B[3];
- A[4]=B[4]; A[5]=B[5]; A[6]=B[6]; A[7]=B[7];
- A+=8;
- B+=8;
- }
- switch (b->top&7)
- {
- case 7:
- A[6]=B[6];
- case 6:
- A[5]=B[5];
- case 5:
- A[4]=B[4];
- case 4:
- A[3]=B[3];
- case 3:
- A[2]=B[2];
- case 2:
- A[1]=B[1];
- case 1:
- A[0]=B[0];
- case 0:
- /* I need the 'case 0' entry for utrix cc.
- * If the optimizer is turned on, it does the
- * switch table by doing
- * a=top&7
- * a--;
- * goto jump_table[a];
- * If top is 0, this makes us jump to 0xffffffc
- * which is rather bad :-(.
- * eric 23-Apr-1998
- */
- ;
- }
+ for (i=b->top&(~7); i>0; i-=8)
+ {
+ A[0]=B[0]; A[1]=B[1]; A[2]=B[2]; A[3]=B[3];
+ A[4]=B[4]; A[5]=B[5]; A[6]=B[6]; A[7]=B[7];
+ A+=8;
+ B+=8;
+ }
+ switch (b->top&7)
+ {
+ case 7:
+ A[6]=B[6];
+ case 6:
+ A[5]=B[5];
+ case 5:
+ A[4]=B[4];
+ case 4:
+ A[3]=B[3];
+ case 3:
+ A[2]=B[2];
+ case 2:
+ A[1]=B[1];
+ case 1:
+ A[0]=B[0];
+ case 0:
+ /* I need the 'case 0' entry for utrix cc.
+ * If the optimizer is turned on, it does the
+ * switch table by doing
+ * a=top&7
+ * a--;
+ * goto jump_table[a];
+ * If top is 0, this makes us jump to 0xffffffc
+ * which is rather bad :-(.
+ * eric 23-Apr-1998
+ */
+ ;
+ }
#else
- for (i=b->top>>2; i>0; i--,A+=4,B+=4)
+ for (i=b->top>>2; i>0; i--,A+=4,B+=4)
+ {
+ /*
+ * The fact that the loop is unrolled
+ * 4-wise is a tribute to Intel. It's
+ * the one that doesn't have enough
+ * registers to accomodate more data.
+ * I'd unroll it 8-wise otherwise:-)
+ *
+ * <appro@fy.chalmers.se>
+ */
+ BN_ULONG a0,a1,a2,a3;
+ a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3];
+ A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3;
+ }
+ switch (b->top&3)
+ {
+ case 3: A[2]=B[2];
+ case 2: A[1]=B[1];
+ case 1: A[0]=B[0];
+ case 0: ; /* ultrix cc workaround, see above */
+ }
+#endif
+ }
+
+ /* Now need to zero any data between b->top and b->max */
+
+ A= &(a[b->top]);
+ for (i=(words - b->top)>>3; i>0; i--,A+=8)
+ {
+ A[0]=0; A[1]=0; A[2]=0; A[3]=0;
+ A[4]=0; A[5]=0; A[6]=0; A[7]=0;
+ }
+ for (i=(words - b->top)&7; i>0; i--,A++)
+ A[0]=0;
+#else
+ memset(A,0,sizeof(BN_ULONG)*(words+1));
+ memcpy(A,b->d,sizeof(b->d[0])*b->top);
+#endif
+
+ return(a);
+ }
+
+/* This is an internal function that can be used instead of bn_expand2()
+ * when there is a need to copy BIGNUMs instead of only expanding the
+ * data part, while still expanding them.
+ * Especially useful when needing to expand BIGNUMs that are declared
+ * 'const' and should therefore not be changed.
+ * The reason to use this instead of a BN_dup() followed by a bn_expand2()
+ * is memory allocation overhead. A BN_dup() followed by a bn_expand2()
+ * will allocate new memory for the BIGNUM data twice, and free it once,
+ * while bn_dup_expand() makes sure allocation is made only once.
+ */
+
+BIGNUM *bn_dup_expand(const BIGNUM *b, int words)
+ {
+ BIGNUM *r = NULL;
+
+ if (words > b->dmax)
+ {
+ BN_ULONG *a = internal_bn_expand(b, words);
+
+ if (a)
+ {
+ r = BN_new();
+ if (r)
{
- /*
- * The fact that the loop is unrolled
- * 4-wise is a tribute to Intel. It's
- * the one that doesn't have enough
- * registers to accomodate more data.
- * I'd unroll it 8-wise otherwise:-)
- *
- * <appro@fy.chalmers.se>
- */
- BN_ULONG a0,a1,a2,a3;
- a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3];
- A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3;
+ r->top = b->top;
+ r->dmax = words;
+ r->neg = b->neg;
+ r->d = a;
}
- switch (b->top&3)
+ else
{
- case 3: A[2]=B[2];
- case 2: A[1]=B[1];
- case 1: A[0]=B[0];
- case 0: ; /* ultrix cc workaround, see above */
+ /* r == NULL, BN_new failure */
+ OPENSSL_free(a);
}
-#endif
- OPENSSL_free(b->d);
}
+ /* If a == NULL, there was an error in allocation in
+ internal_bn_expand(), and NULL should be returned */
+ }
+ else
+ {
+ r = BN_dup(b);
+ }
- b->d=a;
- b->dmax=words;
+ return r;
+ }
- /* Now need to zero any data between b->top and b->max */
+/* This is an internal function that should not be used in applications.
+ * It ensures that 'b' has enough room for a 'words' word number number.
+ * It is mostly used by the various BIGNUM routines. If there is an error,
+ * NULL is returned. If not, 'b' is returned. */
- A= &(b->d[b->top]);
- for (i=(b->dmax - b->top)>>3; i>0; i--,A+=8)
+BIGNUM *bn_expand2(BIGNUM *b, int words)
+ {
+ if (words > b->dmax)
+ {
+ BN_ULONG *a = internal_bn_expand(b, words);
+
+ if (a)
{
- A[0]=0; A[1]=0; A[2]=0; A[3]=0;
- A[4]=0; A[5]=0; A[6]=0; A[7]=0;
- }
- for (i=(b->dmax - b->top)&7; i>0; i--,A++)
- A[0]=0;
-#else
- memset(A,0,sizeof(BN_ULONG)*(words+1));
- memcpy(A,b->d,sizeof(b->d[0])*b->top);
+ OPENSSL_free(b->d);
b->d=a;
- b->max=words;
-#endif
-
-/* memset(&(p[b->max]),0,((words+1)-b->max)*sizeof(BN_ULONG)); */
-/* { int i; for (i=b->max; i<words+1; i++) p[i]=i;} */
-
+ b->dmax=words;
+ }
+ else
+ b = NULL;
}
- return(b);
+ return b;
}
BIGNUM *BN_dup(const BIGNUM *a)
a->neg=0;
}
-BN_ULONG BN_get_word(BIGNUM *a)
+BN_ULONG BN_get_word(const BIGNUM *a)
{
int i,n;
BN_ULONG ret=0;
projects / openssl.git / blobdiff