#ifndef HEADER_BN_LCL_H
#define HEADER_BN_LCL_H
-#include <openssl/bn.h>
+#include "internal/bn_int.h"
#ifdef __cplusplus
extern "C" {
#endif
+/* Bignum consistency macros
+ * There is one "API" macro, bn_fix_top(), for stripping leading zeroes from
+ * bignum data after direct manipulations on the data. There is also an
+ * "internal" macro, bn_check_top(), for verifying that there are no leading
+ * zeroes. Unfortunately, some auditing is required due to the fact that
+ * bn_fix_top() has become an overabused duct-tape because bignum data is
+ * occasionally passed around in an inconsistent state. So the following
+ * changes have been made to sort this out;
+ * - bn_fix_top()s implementation has been moved to bn_correct_top()
+ * - if BN_DEBUG isn't defined, bn_fix_top() maps to bn_correct_top(), and
+ * bn_check_top() is as before.
+ * - if BN_DEBUG *is* defined;
+ * - bn_check_top() tries to pollute unused words even if the bignum 'top' is
+ * consistent. (ed: only if BN_DEBUG_RAND is defined)
+ * - bn_fix_top() maps to bn_check_top() rather than "fixing" anything.
+ * The idea is to have debug builds flag up inconsistent bignums when they
+ * occur. If that occurs in a bn_fix_top(), we examine the code in question; if
+ * the use of bn_fix_top() was appropriate (ie. it follows directly after code
+ * that manipulates the bignum) it is converted to bn_correct_top(), and if it
+ * was not appropriate, we convert it permanently to bn_check_top() and track
+ * down the cause of the bug. Eventually, no internal code should be using the
+ * bn_fix_top() macro. External applications and libraries should try this with
+ * their own code too, both in terms of building against the openssl headers
+ * with BN_DEBUG defined *and* linking with a version of OpenSSL built with it
+ * defined. This not only improves external code, it provides more test
+ * coverage for openssl's own code.
+ */
+
+#ifdef BN_DEBUG
+
+/* We only need assert() when debugging */
+#include <assert.h>
+
+#ifdef BN_DEBUG_RAND
+/* To avoid "make update" cvs wars due to BN_DEBUG, use some tricks */
+#ifndef RAND_pseudo_bytes
+int RAND_pseudo_bytes(unsigned char *buf,int num);
+#define BN_DEBUG_TRIX
+#endif
+#define bn_pollute(a) \
+ do { \
+ const BIGNUM *_bnum1 = (a); \
+ if(_bnum1->top < _bnum1->dmax) { \
+ unsigned char _tmp_char; \
+ /* We cast away const without the compiler knowing, any \
+ * *genuinely* constant variables that aren't mutable \
+ * wouldn't be constructed with top!=dmax. */ \
+ BN_ULONG *_not_const; \
+ memcpy(&_not_const, &_bnum1->d, sizeof(BN_ULONG*)); \
+ RAND_pseudo_bytes(&_tmp_char, 1); \
+ memset((unsigned char *)(_not_const + _bnum1->top), _tmp_char, \
+ (_bnum1->dmax - _bnum1->top) * sizeof(BN_ULONG)); \
+ } \
+ } while(0)
+#ifdef BN_DEBUG_TRIX
+#undef RAND_pseudo_bytes
+#endif
+#else
+#define bn_pollute(a)
+#endif
+#define bn_check_top(a) \
+ do { \
+ const BIGNUM *_bnum2 = (a); \
+ if (_bnum2 != NULL) { \
+ assert((_bnum2->top == 0) || \
+ (_bnum2->d[_bnum2->top - 1] != 0)); \
+ bn_pollute(_bnum2); \
+ } \
+ } while(0)
+
+#define bn_fix_top(a) bn_check_top(a)
-/* Used for temp variables */
-#define BN_CTX_NUM 32
-#define BN_CTX_NUM_POS 12
-struct bignum_ctx
+#define bn_check_size(bn, bits) bn_wcheck_size(bn, ((bits+BN_BITS2-1))/BN_BITS2)
+#define bn_wcheck_size(bn, words) \
+ do { \
+ const BIGNUM *_bnum2 = (bn); \
+ assert((words) <= (_bnum2)->dmax && (words) >= (_bnum2)->top); \
+ /* avoid unused variable warning with NDEBUG */ \
+ (void)(_bnum2); \
+ } while(0)
+
+#else /* !BN_DEBUG */
+
+#define bn_pollute(a)
+#define bn_check_top(a)
+#define bn_fix_top(a) bn_correct_top(a)
+#define bn_check_size(bn, bits)
+#define bn_wcheck_size(bn, words)
+
+#endif
+
+
+BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
+BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
+void bn_sqr_words(BN_ULONG *rp, const BN_ULONG *ap, int num);
+BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d);
+BN_ULONG bn_add_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num);
+BN_ULONG bn_sub_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num);
+
+
+struct bignum_st
{
- int tos;
- BIGNUM bn[BN_CTX_NUM];
+ BN_ULONG *d; /* Pointer to an array of 'BN_BITS2' bit chunks. */
+ int top; /* Index of last used d +1. */
+ /* The next are internal book keeping for bn_expand. */
+ int dmax; /* Size of the d array. */
+ int neg; /* one if the number is negative */
int flags;
- int depth;
- int pos[BN_CTX_NUM_POS];
- int too_many;
- } /* BN_CTX */;
+ };
+
+/* Used for montgomery multiplication */
+struct bn_mont_ctx_st
+ {
+ int ri; /* number of bits in R */
+ BIGNUM RR; /* used to convert to montgomery form */
+ BIGNUM N; /* The modulus */
+ BIGNUM Ni; /* R*(1/R mod N) - N*Ni = 1
+ * (Ni is only stored for bignum algorithm) */
+ BN_ULONG n0[2];/* least significant word(s) of Ni;
+ (type changed with 0.9.9, was "BN_ULONG n0;" before) */
+ int flags;
+ };
+
+/* Used for reciprocal division/mod functions
+ * It cannot be shared between threads
+ */
+struct bn_recp_ctx_st
+ {
+ BIGNUM N; /* the divisor */
+ BIGNUM Nr; /* the reciprocal */
+ int num_bits;
+ int shift;
+ int flags;
+ };
+
+/* Used for slow "generation" functions. */
+struct bn_gencb_st
+ {
+ unsigned int ver; /* To handle binary (in)compatibility */
+ void *arg; /* callback-specific data */
+ union
+ {
+ /* if(ver==1) - handles old style callbacks */
+ void (*cb_1)(int, int, void *);
+ /* if(ver==2) - new callback style */
+ int (*cb_2)(int, int, BN_GENCB *);
+ } cb;
+ };
/*
+/* BN_mod_exp_mont_conttime is based on the assumption that the
+ * L1 data cache line width of the target processor is at least
+ * the following value.
+ */
+#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH ( 64 )
+#define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1)
+
+/* Window sizes optimized for fixed window size modular exponentiation
+ * algorithm (BN_mod_exp_mont_consttime).
+ *
+ * To achieve the security goals of BN_mode_exp_mont_consttime, the
+ * maximum size of the window must not exceed
+ * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH).
+ *
+ * Window size thresholds are defined for cache line sizes of 32 and 64,
+ * cache line sizes where log_2(32)=5 and log_2(64)=6 respectively. A
+ * window size of 7 should only be used on processors that have a 128
+ * byte or greater cache line size.
+ */
+#if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64
+
+# define BN_window_bits_for_ctime_exponent_size(b) \
+ ((b) > 937 ? 6 : \
+ (b) > 306 ? 5 : \
+ (b) > 89 ? 4 : \
+ (b) > 22 ? 3 : 1)
+# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6)
+
+#elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32
+
+# define BN_window_bits_for_ctime_exponent_size(b) \
+ ((b) > 306 ? 5 : \
+ (b) > 89 ? 4 : \
+ (b) > 22 ? 3 : 1)
+# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5)
+
+#endif
+
+
/* Pentium pro 16,16,16,32,64 */
/* Alpha 16,16,16,16.64 */
#define BN_MULL_SIZE_NORMAL (16) /* 32 */
#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */
#define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */
+/* 2011-02-22 SMS.
+ * In various places, a size_t variable or a type cast to size_t was
+ * used to perform integer-only operations on pointers. This failed on
+ * VMS with 64-bit pointers (CC /POINTER_SIZE = 64) because size_t is
+ * still only 32 bits. What's needed in these cases is an integer type
+ * with the same size as a pointer, which size_t is not certain to be.
+ * The only fix here is VMS-specific.
+ */
+#if defined(OPENSSL_SYS_VMS)
+# if __INITIAL_POINTER_SIZE == 64
+# define PTR_SIZE_INT long long
+# else /* __INITIAL_POINTER_SIZE == 64 */
+# define PTR_SIZE_INT int
+# endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+#elif !defined(PTR_SIZE_INT) /* defined(OPENSSL_SYS_VMS) */
+# define PTR_SIZE_INT size_t
+#endif /* defined(OPENSSL_SYS_VMS) [else] */
+
#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
/*
* BN_UMULT_HIGH section.
# if defined(__DECC)
# include <c_asm.h>
# define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))
-# elif defined(__GNUC__)
+# elif defined(__GNUC__) && __GNUC__>=2
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret; \
asm ("umulh %1,%2,%0" \
ret; })
# endif /* compiler */
# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)
-# if defined(__GNUC__)
+# if defined(__GNUC__) && __GNUC__>=2
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret; \
asm ("mulhdu %0,%1,%2" \
: "r"(a), "r"(b)); \
ret; })
# endif /* compiler */
+# elif (defined(__x86_64) || defined(__x86_64__)) && \
+ (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
+# if defined(__GNUC__) && __GNUC__>=2
+# define BN_UMULT_HIGH(a,b) ({ \
+ register BN_ULONG ret,discard; \
+ asm ("mulq %3" \
+ : "=a"(discard),"=d"(ret) \
+ : "a"(a), "g"(b) \
+ : "cc"); \
+ ret; })
+# define BN_UMULT_LOHI(low,high,a,b) \
+ asm ("mulq %3" \
+ : "=a"(low),"=d"(high) \
+ : "a"(a),"g"(b) \
+ : "cc");
+# endif
+# elif (defined(_M_AMD64) || defined(_M_X64)) && defined(SIXTY_FOUR_BIT)
+# if defined(_MSC_VER) && _MSC_VER>=1400
+ unsigned __int64 __umulh (unsigned __int64 a,unsigned __int64 b);
+ unsigned __int64 _umul128 (unsigned __int64 a,unsigned __int64 b,
+ unsigned __int64 *h);
+# pragma intrinsic(__umulh,_umul128)
+# define BN_UMULT_HIGH(a,b) __umulh((a),(b))
+# define BN_UMULT_LOHI(low,high,a,b) ((low)=_umul128((a),(b),&(high)))
+# endif
+# elif defined(__mips) && (defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG))
+# if defined(__GNUC__) && __GNUC__>=2
+# if __GNUC__>=4 && __GNUC_MINOR__>=4 /* "h" constraint is no more since 4.4 */
+# define BN_UMULT_HIGH(a,b) (((__uint128_t)(a)*(b))>>64)
+# define BN_UMULT_LOHI(low,high,a,b) ({ \
+ __uint128_t ret=(__uint128_t)(a)*(b); \
+ (high)=ret>>64; (low)=ret; })
+# else
+# define BN_UMULT_HIGH(a,b) ({ \
+ register BN_ULONG ret; \
+ asm ("dmultu %1,%2" \
+ : "=h"(ret) \
+ : "r"(a), "r"(b) : "l"); \
+ ret; })
+# define BN_UMULT_LOHI(low,high,a,b)\
+ asm ("dmultu %2,%3" \
+ : "=l"(low),"=h"(high) \
+ : "r"(a), "r"(b));
+# endif
+# endif
+# elif defined(__aarch64__) && defined(SIXTY_FOUR_BIT_LONG)
+# if defined(__GNUC__) && __GNUC__>=2
+# define BN_UMULT_HIGH(a,b) ({ \
+ register BN_ULONG ret; \
+ asm ("umulh %0,%1,%2" \
+ : "=r"(ret) \
+ : "r"(a), "r"(b)); \
+ ret; })
+# endif
# endif /* cpu */
#endif /* OPENSSL_NO_ASM */
#define Lw(t) (((BN_ULONG)(t))&BN_MASK2)
#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
-/* This is used for internal error checking and is not normally used */
-#ifdef BN_DEBUG
-# include <assert.h>
-# define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);
-#else
-# define bn_check_top(a)
-#endif
-
-/* This macro is to add extra stuff for development checking */
-#ifdef BN_DEBUG
-#define bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA))
-#else
-#define bn_set_max(r)
-#endif
-
-/* These macros are used to 'take' a section of a bignum for read only use */
-#define bn_set_low(r,a,n) \
- { \
- (r)->top=((a)->top > (n))?(n):(a)->top; \
- (r)->d=(a)->d; \
- (r)->neg=(a)->neg; \
- (r)->flags|=BN_FLG_STATIC_DATA; \
- bn_set_max(r); \
- }
-
-#define bn_set_high(r,a,n) \
+#ifdef BN_DEBUG_RAND
+#define bn_clear_top2max(a) \
{ \
- if ((a)->top > (n)) \
- { \
- (r)->top=(a)->top-n; \
- (r)->d= &((a)->d[n]); \
- } \
- else \
- (r)->top=0; \
- (r)->neg=(a)->neg; \
- (r)->flags|=BN_FLG_STATIC_DATA; \
- bn_set_max(r); \
+ int ind = (a)->dmax - (a)->top; \
+ BN_ULONG *ftl = &(a)->d[(a)->top-1]; \
+ for (; ind != 0; ind--) \
+ *(++ftl) = 0x0; \
}
+#else
+#define bn_clear_top2max(a)
+#endif
#ifdef BN_LLONG
#define mul_add(r,a,w,c) { \
(r1)=Hw(t); \
}
+#elif defined(BN_UMULT_LOHI)
+#define mul_add(r,a,w,c) { \
+ BN_ULONG high,low,ret,tmp=(a); \
+ ret = (r); \
+ BN_UMULT_LOHI(low,high,w,tmp); \
+ ret += (c); \
+ (c) = (ret<(c))?1:0; \
+ (c) += high; \
+ ret += low; \
+ (c) += (ret<low)?1:0; \
+ (r) = ret; \
+ }
+
+#define mul(r,a,w,c) { \
+ BN_ULONG high,low,ret,ta=(a); \
+ BN_UMULT_LOHI(low,high,w,ta); \
+ ret = low + (c); \
+ (c) = high; \
+ (c) += (ret<low)?1:0; \
+ (r) = ret; \
+ }
+
+#define sqr(r0,r1,a) { \
+ BN_ULONG tmp=(a); \
+ BN_UMULT_LOHI(r0,r1,tmp,tmp); \
+ }
+
#elif defined(BN_UMULT_HIGH)
#define mul_add(r,a,w,c) { \
BN_ULONG high,low,ret,tmp=(a); \
#define LBITS(a) ((a)&BN_MASK2l)
#define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l)
-#define L2HBITS(a) ((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4)
+#define L2HBITS(a) (((a)<<BN_BITS4)&BN_MASK2)
#define LLBITS(a) ((a)&BN_MASKl)
#define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl)
lt=(bl)*(lt); \
m1=(bl)*(ht); \
ht =(bh)*(ht); \
- m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \
+ m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \
ht+=HBITS(m); \
m1=L2HBITS(m); \
lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
}
#endif /* !BN_LLONG */
+void BN_init(BIGNUM *a);
+void BN_RECP_CTX_init(BN_RECP_CTX *recp);
+void BN_MONT_CTX_init(BN_MONT_CTX *ctx);
+
void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);
void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
BN_ULONG *t);
void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
BN_ULONG *t);
+BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+ int cl, int dl);
BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
int cl, int dl);
+int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num);
+
+BIGNUM *int_bn_mod_inverse(BIGNUM *in,
+ const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx, int *noinv);
+
+int bn_probable_prime_dh(BIGNUM *rnd, int bits,
+ const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx);
+int bn_probable_prime_dh_retry(BIGNUM *rnd, int bits, BN_CTX *ctx);
+int bn_probable_prime_dh_coprime(BIGNUM *rnd, int bits, BN_CTX *ctx);
#ifdef __cplusplus
}