#!/bin/sh
-# Copyright 1998-2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 1998-2017 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
#
# Do "config -h" for usage information.
SUFFIX=""
-TEST="false"
+DRYRUN="false"
+VERBOSE="false"
EXE=""
THERE=`dirname $0`
do
case "$i" in
-d*) options=$options" --debug";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
+-t*) DRYRUN="true" VERBOSE="true";;
+-v*) VERBOSE="true";;
+-h*) DRYRUN="true"; cat <<EOF
Usage: config [options]
-d Build with debugging when possible.
-t Test mode, do not run the Configure perl script.
+ -v Verbose mode, show the exact Configure call that is being made.
-h This help.
Any other text will be passed to the Configure perl script.
echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
;;
+ DragonFly:*)
+ echo "${MACHINE}-whatever-dragonfly"; exit 0
+ ;;
+
FreeBSD:*)
echo "${MACHINE}-whatever-freebsd"; exit 0
;;
echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
;;
+ # The following combinations are supported
+ # MINGW64* on x86_64 => mingw64
+ # MINGW32* on x86_64 => mingw
+ # MINGW32* on i?86 => mingw
+ #
+ # MINGW64* on i?86 isn't expected to work...
+ MINGW64*:*:*:x86_64)
+ echo "${MACHINE}-whatever-mingw64"; exit 0;
+ ;;
MINGW*)
echo "${MACHINE}-whatever-mingw"; exit 0;
;;
fi
fi
-if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
- # check for Compaq C, expected output is "blah-blah C Vx.x"
- CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
- egrep -e '.* C V[0-9]\.[0-9]' | \
- sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
- CCCVER=${CCCVER:-0}
- if [ $CCCVER -gt 60 ]; then
- CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
- # only on hash routines and des, otherwise gcc (2.95)
- # keeps along rather tight...
- fi
-fi
-
if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
(cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
fi
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure irix64-mips4-$CC' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure darwin64-ppc-cc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke 'KERNEL_BITS=64 $THERE/config $options'."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
# The stty technique used elsewhere doesn't work on
# MacOS. At least, right now on this Mac.
OUT="darwin-i386-cc"
fi ;;
x86_64-apple-darwin*)
- if [ -z "$KERNEL_BITS" ]; then
- echo "WARNING! If you wish to build 32-bit library, then you have to"
- echo " invoke 'KERNEL_BITS=32 $THERE/config $options'."
- if [ "$TEST" = "false" -a -t 1 ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- # The stty technique used elsewhere doesn't work on
- # MacOS. At least, right now on this Mac.
- sleep 5
- fi
- fi
if [ "$KERNEL_BITS" = "32" ]; then
OUT="darwin-i386-cc"
else
if [ -z "$KERNEL_BITS" ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure linux-ppc64' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
mips64*-*-linux2)
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure linux64-mips64' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
echo " and wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure linux64-sparcv9' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
#if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
# echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
# echo " have to invoke './Configure linux32-s390x' *manually*."
- # if [ "$TEST" = "false" -a -t -1 ]; then
+ # if [ "$DRYRUN" = "false" -a -t -1 ]; then
# echo " You have about 5 seconds to press Ctrl-C to abort."
# (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
# fi
#fi
OUT="linux64-s390x"
;;
- x86_64-*-linux?) OUT="linux-x86_64" ;;
- *86-*-linux2) OUT="linux-elf"
- if [ "$GCCVER" -gt 28 ]; then
- if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
- options="$options -march=pentium"
- fi
- if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
- options="$options -march=pentiumpro"
- fi
- if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
- options="$options -march=k6"
- fi
+ x86_64-*-linux?)
+ if $CC -dM -E -x c /dev/null 2>&1 | grep -q ILP32 > /dev/null; then
+ OUT="linux-x32"
+ else
+ OUT="linux-x86_64"
+ fi ;;
+ *86-*-linux2)
+ # On machines where the compiler understands -m32, prefer a
+ # config target that uses it
+ if $CC -m32 -E -x c /dev/null > /dev/null 2>&1; then
+ OUT="linux-x86"
+ else
+ OUT="linux-elf"
fi ;;
- *-*-linux1) OUT="linux-aout" ;;
- *-*-linux2) OUT="linux-generic32" ;;
+ *86-*-linux1) OUT="linux-aout" ;;
+ *-*-linux?) OUT="linux-generic32" ;;
sun4[uv]*-*-solaris2)
OUT="solaris-sparcv9-$CC"
ISA64=`(isainfo) 2>/dev/null | grep sparcv9`
if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure solaris64-sparcv9-cc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
OUT="solaris64-sparcv9-gcc"
echo "WARNING! If you wish to build 32-bit library, then you have to"
echo " invoke '$THERE/Configure solaris-sparcv9-gcc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
echo " and wish to build 64-bit library, then you have to"
echo " invoke '$THERE/Configure solaris64-sparcv9-gcc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
ia64-*-*bsd*) OUT="BSD-ia64" ;;
+ x86_64-*-dragonfly*) OUT="BSD-x86_64" ;;
amd64-*-*bsd*) OUT="BSD-x86_64" ;;
*86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
*ELF*) OUT="BSD-x86-elf" ;;
*) OUT="BSD-x86"; options="$options no-sse2" ;;
esac ;;
+ *-*-*bsd*) OUT="BSD-generic32" ;;
+
x86_64-*-haiku) OUT="haiku-x86_64" ;;
*-*-haiku) OUT="haiku-x86" ;;
- *-*-*bsd*) OUT="BSD-generic32" ;;
*-*-osf) OUT="osf1-alpha-cc" ;;
*-*-tru64) OUT="tru64-alpha-cc" ;;
if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
echo "WARNING! If you wish to build 64-bit library then you have to"
echo " invoke '$THERE/Configure hpux64-parisc2-cc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
if [ $KERNEL_BITS -eq 64 ]; then
echo "WARNING! If you wish to build 64-bit kit, then you have to"
echo " invoke '$THERE/Configure aix64-cc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
echo " You have ~5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
i386-*) options="$options 386" ;;
esac
-for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
+for i in aes aria bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
do
if [ ! -d $THERE/crypto/$i ]
then
$PERL $THERE/Configure LIST | grep "$OUT" > /dev/null
if [ $? = "0" ]; then
- echo Configuring for $OUT
-
- if [ "$TEST" = "true" ]; then
+ if [ "$VERBOSE" = "true" ]; then
echo $PERL $THERE/Configure $OUT $options
- else
+ fi
+ if [ "$DRYRUN" = "false" ]; then
$PERL $THERE/Configure $OUT $options
fi
else
echo "This system ($OUT) is not supported. See file INSTALL for details."
+ exit 1
+fi
+
+if [ "$OUT" = "darwin64-x86_64-cc" ]; then
+ echo "WARNING! If you wish to build 32-bit libraries, then you have to"
+ echo " invoke 'KERNEL_BITS=32 $THERE/config $options'."
fi
)
projects / openssl.git / blobdiff