echo "${MACHINE}-lynx-lynxos"; exit 0
;;
+ BSD/OS:4.*) # BSD/OS always says 386
+ echo "i486-whatever-bsdi4"; exit 0
+ ;;
+
BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
- echo "i486-whatever-bsdi"; exit 0
+ case `/sbin/sysctl -n hw.model` in
+ Pentium*)
+ echo "i586-whatever-bsdi"; exit 0
+ ;;
+ *)
+ echo "i386-whatever-bsdi"; exit 0
+ ;;
+ esac;
;;
BSD/386:*|BSD/OS:*)
echo "${MACHINE}-whatever-bsdi"; exit 0
;;
- FreeBSD:3*:*:*)
- echo "${MACHINE}-whatever-freebsd3"; exit 0
- ;;
-
FreeBSD:*:*:*386*)
case `sysctl -n hw.model` in
Pentium*)
echo "${MACHINE}-unknown-ultrix"; exit 0
;;
- SINIX*)
- echo "${MACHINE}-sni-sysv4"; exit 0
+ SINIX*|ReliantUNIX*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0
+ ;;
+
+ POSIX-BC*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
;;
machten:*)
# Now NeXT
ISNEXT=`hostinfo 2>/dev/null`
case "$ISNEXT" in
+ *'NeXT Mach 3.3'*)
+ echo "whatever-next-nextstep3.3"; exit 0
+ ;;
*NeXT*)
echo "whatever-next-nextstep"; exit 0
;;
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc -v) 2>&1`
-if [ $? = "0" ]; then
+GCCVER=`(gcc --version) 2>/dev/null`
+if [ "$GCCVER" != "" ]; then
CC=gcc
+ # then strip off whatever prefix Cygnus prepends the number with...
+ GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+ # peak only digits before and after first dot, e.g. 2.95.1 gives 29
+ GCCVER=`echo $GCCVER | sed '/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
if [ "$SYSTEM" = "SunOS" ]
then
case `cc -V 2>&1` in
- *4*) CC=sc4;;
- *5*) CC=sc5;;
- *) CC=cc;;
+ *4*) CC=cc;;
+ *5*) CC=cc;;
+ *) CC=sc3;;
esac
fi
fi
case "$GUESSOS" in
alpha-*-linux2) OUT="alpha-gcc" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
+ mips-*-linux?) OUT="linux-mips" ;;
+ sparc64-*-linux2)
+ #Before we uncomment following line we have to wait at least till
+ #64-bit glibc for SPARC is available:-(
+ #echo "WARNING! If you wish to build 64-bit library, then you have to"
+ #echo " invoke './Configure linux64-sparcv9' *manually*."
+ #echo " Type Ctrl-C if you don't want to continue."
+ #read waste < /dev/tty
+ OUT="linux-sparcv9" ;;
+ sparc-*-linux2) OUT="linux-sparc" ;;
+ KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+ case ${KARCH:-sun4} in
+ sun4u*) OUT="linux-sparcv9" ;;
+ sun4m) OUT="linux-sparcv8" ;;
+ sun4d) OUT="linux-sparcv8" ;;
+ *) OUT="linux-sparcv7" ;;
+ esac ;;
*-*-linux2) OUT="linux-elf" ;;
*-*-linux1) OUT="linux-aout" ;;
sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
*86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
- alpha*-*-freebsd3) OUT="FreeBSD-alpha" ;;
- *-freebsd3) OUT="FreeBSD-elf" ;;
+ alpha*-*-freebsd) OUT="FreeBSD-alpha" ;;
*-freebsd) OUT="FreeBSD" ;;
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
*-*-openbsd) OUT="OpenBSD" ;;
+ *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
*-*-osf) OUT="alpha-cc" ;;
*-*-unixware*) OUT="unixware-2.0" ;;
- *-sni-sysv4) OUT="SINIX" ;;
+ BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
+ RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
+ *-siemens-sysv4) OUT="SINIX" ;;
# these are all covered by the catchall below
# *-hpux*) OUT="hpux-$CC" ;;
# *-aix) OUT="aix-$CC" ;;
esac
# gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-usparc-gcc ]
+if [ "$OUT" = solaris-usparc-gcc -a $GCCVER -lt 28 ]
then
- if [ `echo "$GCCVER" | sed 's/.*version //;s/\.//;s/\..*//'` -lt 28 ]
- then
+ echo "WARNING! Do consider upgrading to gcc-2.8 or later."
OUT=solaris-usparc-oldgcc
- fi
+fi
+if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
+then
+ echo "WARNING! Falling down to 'linux-sparcv8'."
+ echo " Upgrade to gcc-2.8 or later."
+ OUT=linux-sparcv8
fi
case "$GUESSOS" in
i386-*) options="$options 386" ;;
esac
+for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+do
+ if [ ! -d crypto/$i ]
+ then
+ options="$options no-$i"
+ fi
+done
+
if [ -z "$OUT" ]; then
OUT="$CC"
fi