#!/bin/sh
+# Copyright 1998-2016 The OpenSSL Project Authors. All Rights Reserved.
#
+# Licensed under the OpenSSL license (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
# OpenSSL config: determine the operating system and run ./Configure
+# Derived from minarch and GuessOS from Apache.
#
-# "config -h" for usage information.
-#
-# this is a merge of minarch and GuessOS from the Apache Group.
-# Originally written by Tim Hudson <tjh@cryptsoft.com>.
-
-# Original Apache Group comments on GuessOS
-
-# Simple OS/Platform guesser. Similar to config.guess but
-# much, much smaller. Since it was developed for use with
-# Apache, it follows under Apache's regular licensing
-# with one specific addition: Any changes or additions
-# to this script should be Emailed to the Apache
-# group (apache@apache.org) in general and to
-# Jim Jagielski (jim@jaguNET.com) in specific.
-#
-# Be as similar to the output of config.guess/config.sub
-# as possible.
+# Do "config -h" for usage information.
+SUFFIX=""
+DRYRUN="false"
+VERBOSE="false"
+EXE=""
+THERE=`dirname $0`
+
+# pick up any command line args to config
+for i
+do
+case "$i" in
+-d*) options=$options" --debug";;
+-t*) DRYRUN="true" VERBOSE="true";;
+-v*) VERBOSE="true";;
+-h*) DRYRUN="true"; cat <<EOF
+Usage: config [options]
+ -d Build with debugging when possible.
+ -t Test mode, do not run the Configure perl script.
+ -v Verbose mode, show the exact Configure call that is being made.
+ -h This help.
+
+Any other text will be passed to the Configure perl script.
+See INSTALL for instructions.
+
+EOF
+;;
+*) options=$options" $i" ;;
+esac
+done
# First get uname entries that we use below
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+
# Now test for ISC and SCO, since it is has a braindamaged uname.
#
echo "whatever-whatever-sco5"; exit 0
;;
4.2MP)
- if [ "x$VERSION" = "x2.1.1" ]; then
- echo "${MACHINE}-whatever-unixware211"; exit 0
- else
- echo "${MACHINE}-whatever-unixware2"; exit 0
- fi
+ case "x${VERSION}" in
+ x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+ x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+ x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
+ esac
;;
4.2)
echo "whatever-whatever-unixware1"; exit 0
;;
+ 5*)
+ case "x${VERSION}" in
+ # We hardcode i586 in place of ${MACHINE} for the
+ # following reason. The catch is that even though Pentium
+ # is minimum requirement for platforms in question,
+ # ${MACHINE} gets always assigned to i386. Now, problem
+ # with i386 is that it makes ./config pass 386 to
+ # ./Configure, which in turn makes make generate
+ # inefficient SHA-1 (for this moment) code.
+ x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
+ esac
+ ;;
esac
fi
fi
echo "m68k-apple-aux3"; exit 0
;;
- AIX:*)
+ AIX:[3-9]:4:*)
+ echo "${MACHINE}-ibm-aix"; exit 0
+ ;;
+
+ AIX:*:[5-9]:*)
echo "${MACHINE}-ibm-aix"; exit 0
;;
- dgux:*)
- echo "${MACHINE}-dg-dgux"; exit 0
+ AIX:*)
+ echo "${MACHINE}-ibm-aix3"; exit 0
;;
HI-UX:*)
HP-UX:*)
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "$HPUXVER" in
- 11.*)
- echo "${MACHINE}-hp-hpux11"; exit 0
- ;;
- 10.*)
- echo "${MACHINE}-hp-hpux10"; exit 0
+ 1[0-9].*) # HPUX 10 and 11 targets are unified
+ echo "${MACHINE}-hp-hpux1x"; exit 0
;;
*)
echo "${MACHINE}-hp-hpux"; exit 0
esac
;;
- IRIX:*)
- echo "${MACHINE}-sgi-irix"; exit 0
+ IRIX:6.*)
+ echo "mips3-sgi-irix"; exit 0
;;
IRIX64:*)
- echo "${MACHINE}-sgi-irix64"; exit 0
+ echo "mips4-sgi-irix64"; exit 0
;;
Linux:[2-9].*)
echo "${MACHINE}-whatever-linux1"; exit 0
;;
+ GNU*)
+ echo "hurd-x86"; exit 0;
+ ;;
+
LynxOS:*)
echo "${MACHINE}-lynx-lynxos"; exit 0
;;
- BSD/OS:4.*)
- echo "${MACHINE}-whatever-bsdi4"; exit 0
+ BSD/OS:4.*) # BSD/OS always says 386
+ echo "i486-whatever-bsdi4"; exit 0
;;
BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
- echo "i486-whatever-bsdi"; exit 0
+ case `/sbin/sysctl -n hw.model` in
+ Pentium*)
+ echo "i586-whatever-bsdi"; exit 0
+ ;;
+ *)
+ echo "i386-whatever-bsdi"; exit 0
+ ;;
+ esac;
;;
BSD/386:*|BSD/OS:*)
echo "${MACHINE}-whatever-bsdi"; exit 0
;;
- FreeBSD:3*:*:*)
- echo "${MACHINE}-whatever-freebsd3"; exit 0
- ;;
-
FreeBSD:*:*:*386*)
- case `sysctl -n hw.model` in
- Pentium*)
- echo "i586-whatever-freebsd"; exit 0
- ;;
- *)
- echo "i386-whatever-freebsd"; exit 0
- ;;
- esac;
+ VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
+ MACH=`sysctl -n hw.model`
+ ARCH='whatever'
+ case ${MACH} in
+ *386* ) MACH="i386" ;;
+ *486* ) MACH="i486" ;;
+ Pentium\ II*) MACH="i686" ;;
+ Pentium* ) MACH="i586" ;;
+ * ) MACH="$MACHINE" ;;
+ esac
+ case ${MACH} in
+ i[0-9]86 ) ARCH="pc" ;;
+ esac
+ echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
+ ;;
+
+ DragonFly:*)
+ echo "${MACHINE}-whatever-dragonfly"; exit 0
;;
FreeBSD:*)
echo "${MACHINE}-whatever-freebsd"; exit 0
;;
+ Haiku:*)
+ echo "${MACHINE}-whatever-haiku"; exit 0
+ ;;
+
NetBSD:*:*:*386*)
- echo "`sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whateve\r-netbsd"; exit 0
+ echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
;;
NetBSD:*)
echo "${MACHINE}-whatever-openbsd"; exit 0
;;
+ OpenUNIX:*)
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ ;;
+
OSF1:*:*:*alpha*)
- echo "${MACHINE}-dec-osf"; exit 0
+ OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
+ case "$OSFMAJOR" in
+ 4|5)
+ echo "${MACHINE}-dec-tru64"; exit 0
+ ;;
+ 1|2|3)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ *)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ esac
;;
QNX:*)
- case "$VERSION" in
- 423)
- echo "${MACHINE}-qssl-qnx32"
+ case "$RELEASE" in
+ 4*)
+ echo "${MACHINE}-whatever-qnx4"
+ ;;
+ 6*)
+ echo "${MACHINE}-whatever-qnx6"
;;
*)
- echo "${MACHINE}-qssl-qnx"
+ echo "${MACHINE}-whatever-qnx"
;;
esac
exit 0
echo "i860-intel-osf1"; exit 0
;;
+ Rhapsody:*)
+ echo "ppc-apple-rhapsody"; exit 0
+ ;;
+
+ Darwin:*)
+ case "$MACHINE" in
+ Power*)
+ echo "ppc-apple-darwin${VERSION}"
+ ;;
+ x86_64)
+ echo "x86_64-apple-darwin${VERSION}"
+ ;;
+ *)
+ echo "i686-apple-darwin${VERSION}"
+ ;;
+ esac
+ exit 0
+ ;;
+
SunOS:5.*)
- echo "${MACHINE}-sun-solaris2"; exit 0
+ echo "${MACHINE}-whatever-solaris2"; exit 0
;;
SunOS:*)
echo "${MACHINE}-whatever-sysv4"; exit 0
;;
+ VOS:*:*:i786)
+ echo "i386-stratus-vos"; exit 0
+ ;;
+
+ VOS:*:*:*)
+ echo "hppa1.1-stratus-vos"; exit 0
+ ;;
+
*:4*:R4*:m88k)
echo "${MACHINE}-whatever-sysv4"; exit 0
;;
echo "${MACHINE}-unknown-ultrix"; exit 0
;;
- SINIX*|ReliantUNIX*)
- echo "${MACHINE}-siemens-sysv4"; exit 0
+ POSIX-BC*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
;;
machten:*)
echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
;;
+ MINGW*)
+ echo "${MACHINE}-whatever-mingw"; exit 0;
+ ;;
+ CYGWIN*)
+ echo "${MACHINE}-pc-cygwin"; exit 0
+ ;;
+
+ vxworks*)
+ echo "${MACHINE}-whatever-vxworks"; exit 0;
+ ;;
esac
#
#
# Do the Apollo stuff first. Here, we just simply assume
-# that the existance of the /usr/apollo directory is proof
+# that the existence of the /usr/apollo directory is proof
# enough
if [ -d /usr/apollo ]; then
echo "whatever-apollo-whatever"
# Now NeXT
ISNEXT=`hostinfo 2>/dev/null`
case "$ISNEXT" in
+ *'NeXT Mach 3.3'*)
+ echo "whatever-next-nextstep3.3"; exit 0
+ ;;
*NeXT*)
echo "whatever-next-nextstep"; exit 0
;;
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d Add a debug- prefix to machine choice.
- -t Test mode, do not run the Configure perl script.
- -h This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
-
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
-GCCVER=`(gcc -v) 2>&1`
-if [ $? = "0" ]; then
- CC=gcc
-else
- CC=cc
- if [ "$SYSTEM" = "SunOS" ]
- then
- case `cc -V 2>&1` in
- *4*) CC=cc;;
- *5*) CC=cc;;
- *) CC=sc3;;
- esac
+# Only set CC if not supplied already
+if [ -z "$CROSS_COMPILE$CC" ]; then
+ GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
+ if [ "$GCCVER" != "" ]; then
+ # then strip off whatever prefix egcs prepends the number with...
+ # Hopefully, this will work for any future prefixes as well.
+ GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
+ # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
+ # does give us what we want though, so we use that. We just just the
+ # major and minor version numbers.
+ # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+ GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CC=gcc
+ else
+ CC=cc
+ fi
+fi
+GCCVER=${GCCVER:-0}
+if [ "$SYSTEM" = "HP-UX" ];then
+ # By default gcc is a ILP32 compiler (with long long == 64).
+ GCC_BITS="32"
+ if [ $GCCVER -ge 30 ]; then
+ # PA64 support only came in with gcc 3.0.x.
+ # We check if the preprocessor symbol __LP64__ is defined...
+ if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
+ : # __LP64__ has slipped through, it therefore is not defined
+ else
+ GCC_BITS="64"
+ fi
+ fi
+fi
+if [ "$SYSTEM" = "SunOS" ]; then
+ if [ $GCCVER -ge 30 ]; then
+ # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
+ # to be working, at the very least 'make test' passes...
+ if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
+ GCC_ARCH="-m64"
+ else
+ GCC_ARCH="-m32"
+ fi
+ fi
+ # check for WorkShop C, expected output is "cc: blah-blah C x.x"
+ CCVER=`(cc -V 2>&1) 2>/dev/null | \
+ egrep -e '^cc: .* C [0-9]\.[0-9]' | \
+ sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CCVER=${CCVER:-0}
+ if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
+ CC=cc # overrides gcc!!!
+ if [ $CCVER -eq 50 ]; then
+ echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
+ echo " patch #107357-01 or later applied."
+ sleep 5
+ fi
fi
fi
+if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
+ (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
+fi
+
+CCVER=${CCVER:-0}
+
# read the output of the embedded GuessOS
read GUESSOS
# script above so we end up with values in vars but that would take
# more time that I want to waste at the moment
case "$GUESSOS" in
- alpha-*-linux2) OUT="alpha-gcc" ;;
+ uClinux*64*)
+ OUT=uClinux-dist64
+ ;;
+ uClinux*)
+ OUT=uClinux-dist
+ ;;
+ mips3-sgi-irix)
+ #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ #CPU=${CPU:-0}
+ #if [ $CPU -ge 5000 ]; then
+ # options="$options -mips4"
+ #else
+ # options="$options -mips3"
+ #fi
+ OUT="irix-mips3-$CC"
+ ;;
+ mips4-sgi-irix64)
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure irix64-mips4-$CC' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ #CPU=${CPU:-0}
+ #if [ $CPU -ge 5000 ]; then
+ # options="$options -mips4"
+ #else
+ # options="$options -mips3"
+ #fi
+ OUT="irix-mips3-$CC"
+ ;;
+ ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
+ ppc-apple-darwin*)
+ ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
+ if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure darwin64-ppc-cc' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+ OUT="darwin64-ppc-cc"
+ else
+ OUT="darwin-ppc-cc"
+ fi ;;
+ i?86-apple-darwin*)
+ ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
+ if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke 'KERNEL_BITS=64 $THERE/config $options'."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ # The stty technique used elsewhere doesn't work on
+ # MacOS. At least, right now on this Mac.
+ sleep 5
+ fi
+ fi
+ if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+ OUT="darwin64-x86_64-cc"
+ else
+ OUT="darwin-i386-cc"
+ fi ;;
+ x86_64-apple-darwin*)
+ if [ -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 32-bit library, then you have to"
+ echo " invoke 'KERNEL_BITS=32 $THERE/config $options'."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ # The stty technique used elsewhere doesn't work on
+ # MacOS. At least, right now on this Mac.
+ sleep 5
+ fi
+ fi
+ if [ "$KERNEL_BITS" = "32" ]; then
+ OUT="darwin-i386-cc"
+ else
+ OUT="darwin64-x86_64-cc"
+ fi ;;
+ armv6+7-*-iphoneos)
+ options="$options -arch%20armv6 -arch%20armv7"
+ OUT="iphoneos-cross" ;;
+ *-*-iphoneos)
+ options="$options -arch%20${MACHINE}"
+ OUT="iphoneos-cross" ;;
+ arm64-*-iphoneos|*-*-ios64)
+ OUT="ios64-cross" ;;
+ alpha-*-linux2)
+ ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
+ case ${ISA:-generic} in
+ *[678]) OUT="linux-alpha+bwx-$CC" ;;
+ *) OUT="linux-alpha-$CC" ;;
+ esac
+ if [ "$CC" = "gcc" ]; then
+ case ${ISA:-generic} in
+ EV5|EV45) options="$options -mcpu=ev5";;
+ EV56|PCA56) options="$options -mcpu=ev56";;
+ *) options="$options -mcpu=ev6";;
+ esac
+ fi
+ ;;
+ ppc64-*-linux2)
+ if [ -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure linux-ppc64' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ if [ "$KERNEL_BITS" = "64" ]; then
+ OUT="linux-ppc64"
+ else
+ OUT="linux-ppc"
+ (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32"
+ fi
+ ;;
+ ppc64le-*-linux2) OUT="linux-ppc64le" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
- mips-*-linux?) OUT="linux-mips" ;;
- *-*-linux2) OUT="linux-elf" ;;
- *-*-linux1) OUT="linux-aout" ;;
- sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
- sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
- *86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
- *-*-sunos4) OUT="sunos-$CC" ;;
- alpha*-*-freebsd3) OUT="FreeBSD-alpha" ;;
- *-freebsd3) OUT="FreeBSD-elf" ;;
- *-freebsd) OUT="FreeBSD" ;;
- *86*-*-netbsd) OUT="NetBSD-x86" ;;
- sun3*-*-netbsd) OUT="NetBSD-m68" ;;
- *-*-netbsd) OUT="NetBSD-sparc" ;;
- *86*-*-openbsd) OUT="OpenBSD-x86" ;;
- alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
- pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
- *-*-openbsd) OUT="OpenBSD" ;;
- *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
- *-*-osf) OUT="alpha-cc" ;;
- *-*-unixware*) OUT="unixware-2.0" ;;
- RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
- *-siemens-sysv4) OUT="SINIX" ;;
+ mips64*-*-linux2)
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure linux64-mips64' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ OUT="linux-mips64"
+ ;;
+ mips*-*-linux2) OUT="linux-mips32" ;;
+ ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
+ ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
+ pentium-*-vxworks*) OUT="vxworks-pentium" ;;
+ simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
+ mips-*-vxworks*) OUT="vxworks-mips";;
+ ia64-*-linux?) OUT="linux-ia64" ;;
+ sparc64-*-linux2)
+ echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure linux64-sparcv9' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ OUT="linux-sparcv9" ;;
+ sparc-*-linux2)
+ KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
+ case ${KARCH:-sun4} in
+ sun4u*) OUT="linux-sparcv9" ;;
+ sun4m) OUT="linux-sparcv8" ;;
+ sun4d) OUT="linux-sparcv8" ;;
+ *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+ esac ;;
+ parisc*-*-linux2)
+ # 64-bit builds under parisc64 linux are not supported and
+ # compiler is expected to generate 32-bit objects...
+ CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
+ CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
+
+ # ??TODO ?? Model transformations
+ # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+ # assuming no further arch. identification will ever be used by GCC.
+ # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+ # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+ # for these chips in the future.
+ # PA7300LC -> 7100LC (1.1)
+ # PA8200 -> 8000 (2.0)
+ # PA8500 -> 8000 (2.0)
+ # PA8600 -> 8000 (2.0)
+
+ CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
+ # Finish Model transformations
+
+ options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+ OUT="linux-generic32" ;;
+ armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+ armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
+ arm*-*-linux2) OUT="linux-armv4" ;;
+ aarch64-*-linux2) OUT="linux-aarch64" ;;
+ sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+ sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
+ m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+ s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+ s390x-*-linux2)
+ # To be uncommented when glibc bug is fixed, see Configure...
+ #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
+ # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
+ # echo " have to invoke './Configure linux32-s390x' *manually*."
+ # if [ "$DRYRUN" = "false" -a -t -1 ]; then
+ # echo " You have about 5 seconds to press Ctrl-C to abort."
+ # (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ # fi
+ #fi
+ OUT="linux64-s390x"
+ ;;
+ x86_64-*-linux?)
+ if $CC -dM -E -x c /dev/null 2>&1 | grep -q ILP32 > /dev/null; then
+ OUT="linux-x32"
+ else
+ OUT="linux-x86_64"
+ fi ;;
+ *86-*-linux2)
+ # On machines where the compiler understands -m32, prefer a
+ # config target that uses it
+ if $CC -m32 -E -x c /dev/null > /dev/null 2>&1; then
+ OUT="linux-x86"
+ else
+ OUT="linux-elf"
+ fi ;;
+ *86-*-linux1) OUT="linux-aout" ;;
+ *-*-linux?) OUT="linux-generic32" ;;
+ sun4[uv]*-*-solaris2)
+ OUT="solaris-sparcv9-$CC"
+ ISA64=`(isainfo) 2>/dev/null | grep sparcv9`
+ if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
+ if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure solaris64-sparcv9-cc' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
+ # $GCC_ARCH denotes default ABI chosen by compiler driver
+ # (first one found on the $PATH). I assume that user
+ # expects certain consistency with the rest of his builds
+ # and therefore switch over to 64-bit. <appro>
+ OUT="solaris64-sparcv9-gcc"
+ echo "WARNING! If you wish to build 32-bit library, then you have to"
+ echo " invoke '$THERE/Configure solaris-sparcv9-gcc' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ elif [ "$GCC_ARCH" = "-m32" ]; then
+ echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure solaris64-sparcv9-gcc' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ fi
+ if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
+ OUT="solaris64-sparcv9-$CC"
+ fi
+ ;;
+ sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
+ *86*-*-solaris2)
+ ISA64=`(isainfo) 2>/dev/null | grep amd64`
+ if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
+ OUT="solaris64-x86_64-$CC"
+ else
+ OUT="solaris-x86-$CC"
+ if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
+ options="$options no-sse2"
+ fi
+ fi
+ ;;
+ *-*-sunos4) OUT="sunos-$CC" ;;
+
+ *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
+ alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
+ powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
+ sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
+ ia64-*-*bsd*) OUT="BSD-ia64" ;;
+ x86_64-*-dragonfly*) OUT="BSD-x86_64" ;;
+ amd64-*-*bsd*) OUT="BSD-x86_64" ;;
+ *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
+ if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
+ libc=/usr/lib/libc.so
+ else # OpenBSD
+ # ld searches for highest libc.so.* and so do we
+ libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null`
+ fi
+ case "`(file -L $libc) 2>/dev/null`" in
+ *ELF*) OUT="BSD-x86-elf" ;;
+ *) OUT="BSD-x86"; options="$options no-sse2" ;;
+ esac ;;
+ *-*-*bsd*) OUT="BSD-generic32" ;;
+
+ x86_64-*-haiku) OUT="haiku-x86_64" ;;
+ *-*-haiku) OUT="haiku-x86" ;;
+
+ *-*-osf) OUT="osf1-alpha-cc" ;;
+ *-*-tru64) OUT="tru64-alpha-cc" ;;
+ *-*-[Uu]nix[Ww]are7)
+ if [ "$CC" = "gcc" ]; then
+ OUT="unixware-7-gcc" ; options="$options no-sse2"
+ else
+ OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
+ fi
+ ;;
+ *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
+ *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
+ *-*-vos)
+ options="$options no-threads no-shared no-asm no-dso"
+ EXE=".pm"
+ OUT="vos-$CC" ;;
+ BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
+ *-hpux1*)
+ if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
+ OUT="hpux64-parisc2-gcc"
+ fi
+ [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+ KERNEL_BITS=${KERNEL_BITS:-32}
+ CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
+ CPU_VERSION=${CPU_VERSION:-0}
+ # See <sys/unistd.h> for further info on CPU_VERSION.
+ if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
+ if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+ OUT="hpux64-ia64-cc"
+ else
+ OUT="hpux-ia64-cc"
+ fi
+ elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
+ OUT=${OUT:-"hpux-parisc2-${CC}"}
+ if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+ echo "WARNING! If you wish to build 64-bit library then you have to"
+ echo " invoke '$THERE/Configure hpux64-parisc2-cc' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ # PA-RISC 2.0 is no longer supported as separate 32-bit
+ # target. This is compensated for by run-time detection
+ # in most critical assembly modules and taking advantage
+ # of 2.0 architecture in PA-RISC 1.1 build.
+ OUT="hpux-parisc1_1-${CC}"
+ elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
+ OUT="hpux-parisc1_1-${CC}"
+ elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
+ OUT="hpux-parisc-${CC}"
+ else # Motorola(?) CPU
+ OUT="hpux-$CC"
+ fi
+ options="$options -D_REENTRANT" ;;
+ *-hpux) OUT="hpux-parisc-$CC" ;;
+ *-aix)
+ [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+ KERNEL_BITS=${KERNEL_BITS:-32}
+ OBJECT_MODE=${OBJECT_MODE:-32}
+ if [ "$CC" = "gcc" ]; then
+ OUT="aix-gcc"
+ if [ $OBJECT_MODE -eq 64 ]; then
+ echo 'Your $OBJECT_MODE was found to be set to 64'
+ OUT="aix64-gcc"
+ fi
+ elif [ $OBJECT_MODE -eq 64 ]; then
+ echo 'Your $OBJECT_MODE was found to be set to 64'
+ OUT="aix64-cc"
+ else
+ OUT="aix-cc"
+ if [ $KERNEL_BITS -eq 64 ]; then
+ echo "WARNING! If you wish to build 64-bit kit, then you have to"
+ echo " invoke '$THERE/Configure aix64-cc' *manually*."
+ if [ "$DRYRUN" = "false" -a -t 1 ]; then
+ echo " You have ~5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ fi
+ if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
+ : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
+ else
+ options="$options no-asm"
+ fi
+ ;;
# these are all covered by the catchall below
- # *-hpux*) OUT="hpux-$CC" ;;
- # *-aix) OUT="aix-$CC" ;;
- # *-dgux) OUT="dgux" ;;
+ i[3456]86-*-cygwin) OUT="Cygwin-x86" ;;
+ *-*-cygwin) OUT="Cygwin-${MACHINE}" ;;
+ x86pc-*-qnx6) OUT="QNX6-i386" ;;
+ *-*-qnx6) OUT="QNX6" ;;
+ x86-*-android|i?86-*-android) OUT="android-x86" ;;
+ armv[7-9]*-*-android)
+ OUT="android-armeabi"; options="$options -march=armv7-a" ;;
+ arm*-*-android) OUT="android-armeabi" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
-# gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-usparc-gcc ]
+# NB: This atalla support has been superseded by the ENGINE support
+# That contains its own header and definitions anyway. Support can
+# be enabled or disabled on any supported platform without external
+# headers, eg. by adding the "hw-atalla" switch to ./config or
+# perl Configure
+#
+# See whether we can compile Atalla support
+#if [ -f /usr/include/atasi.h ]
+#then
+# options="$options -DATALLA"
+#fi
+
+if [ -n "$CONFIG_OPTIONS" ]; then
+ options="$options $CONFIG_OPTIONS"
+fi
+
+if expr "$options" : '.*no\-asm' > /dev/null; then :; else
+ sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
+ grep \\--noexecstack >/dev/null && \
+ options="$options -Wa,--noexecstack"
+fi
+
+# gcc < 2.8 does not support -march=ultrasparc
+if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
+then
+ echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
+ echo " Upgrade to gcc-2.8 or later."
+ sleep 5
+ OUT=solaris-sparcv8-gcc
+fi
+if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
then
- GCCVERMAJOR="`echo $GCCVER | sed 's/.*version \([^.]*\).*/\1/`"
- GCCVERMINOR="`echo $GCCVER | sed 's/.*version[^.]*\.\([^.]*\).*/\1/`"
- echo "gcc version $GCCVERMAJOR.$GCCVERMINOR.x"
- if [ $GCCVERMAJOR$GCCVERMINOR -lt 28 ]
- then
- OUT=solaris-usparc-oldgcc
- fi
+ echo "WARNING! Falling down to 'linux-sparcv8'."
+ echo " Upgrade to gcc-2.8 or later."
+ sleep 5
+ OUT=linux-sparcv8
fi
case "$GUESSOS" in
i386-*) options="$options 386" ;;
esac
+for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
+do
+ if [ ! -d $THERE/crypto/$i ]
+ then
+ options="$options no-$i"
+ fi
+done
+
if [ -z "$OUT" ]; then
OUT="$CC"
fi
if [ ".$PERL" = . ] ; then
for i in . `echo $PATH | sed 's/:/ /g'`; do
- if [ -f "$i/perl5" ] ; then
- PERL="$i/perl5"
+ if [ -f "$i/perl5$EXE" ] ; then
+ PERL="$i/perl5$EXE"
break;
fi;
done
if [ ".$PERL" = . ] ; then
for i in . `echo $PATH | sed 's/:/ /g'`; do
- if [ -f "$i/perl" ] ; then
- if "$i/perl" -e 'exit($]<5.0)'; then
- PERL="$i/perl"
+ if [ -f "$i/perl$EXE" ] ; then
+ if "$i/perl$EXE" -e 'exit($]<5.0)'; then
+ PERL="$i/perl$EXE"
break;
fi;
fi;
# compiler for the platform ... in which case we add it on
# the end ... otherwise we leave it off
-$PERL ./Configure 2>&1 | grep "$OUT-$CC" > /dev/null
+$PERL $THERE/Configure LIST | grep "$OUT-$CC" > /dev/null
if [ $? = "0" ]; then
OUT="$OUT-$CC"
fi
-OUT="$PREFIX$OUT"
+OUT="$OUT"
-$PERL ./Configure 2>&1 | grep "$OUT" > /dev/null
+$PERL $THERE/Configure LIST | grep "$OUT" > /dev/null
if [ $? = "0" ]; then
- echo Configuring for $OUT
-
- if [ "$TEST" = "true" ]; then
- echo $PERL ./Configure $OUT $options
- else
- $PERL ./Configure $OUT $options
+ if [ "$VERBOSE" = "true" ]; then
+ echo $PERL $THERE/Configure $OUT $options
+ fi
+ if [ "$DRYRUN" = "false" ]; then
+ $PERL $THERE/Configure $OUT $options
fi
else
echo "This system ($OUT) is not supported. See file INSTALL for details."
+ exit 1
fi
)
projects / openssl.git / blobdiff