Only set current certificate to valid values.
[openssl.git] / config
diff --git a/config b/config
index b2f1584..4052c9e 100755 (executable)
--- a/config
+++ b/config
 # Be as similar to the output of config.guess/config.sub
 # as possible.
 
+PREFIX=""
+SUFFIX=""
+TEST="false"
+EXE=""
+
+# pick up any command line args to config
+for i
+do
+case "$i" in 
+-d*) PREFIX="debug-";;
+-t*) TEST="true";;
+-h*) TEST="true"; cat <<EOF
+Usage: config [options]
+ -d    Add a debug- prefix to machine choice.
+ -t    Test mode, do not run the Configure perl script.
+ -h    This help.
+
+Any other text will be passed to the Configure perl script.
+See INSTALL for instructions.
+
+EOF
+;;
+*) options=$options" $i" ;;
+esac
+done
+
 # First get uname entries that we use below
 
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+
 
 # Now test for ISC and SCO, since it is has a braindamaged uname.
 #
@@ -48,29 +75,61 @@ if [ "x$XREL" != "x" ]; then
                echo "whatever-whatever-sco5"; exit 0
                ;;
            4.2MP)
-               if [ "x$VERSION" = "x2.1.1" ]; then
-                   echo "${MACHINE}-whatever-unixware211"; exit 0
-               else
-                   echo "${MACHINE}-whatever-unixware2"; exit 0
-               fi
+               case "x${VERSION}" in
+                   x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+                   x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+                   x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
+               esac
                ;;
            4.2)
                echo "whatever-whatever-unixware1"; exit 0
                ;;
+           5*)
+               case "x${VERSION}" in
+                   # We hardcode i586 in place of ${MACHINE} for the
+                   # following reason. The catch is that even though Pentium
+                   # is minimum requirement for platforms in question,
+                   # ${MACHINE} gets always assigned to i386. Now, problem
+                   # with i386 is that it makes ./config pass 386 to
+                   # ./Configure, which in turn makes make generate
+                   # inefficient SHA-1 (for this moment) code.
+                   x[678]*)  echo "i586-sco-unixware7"; exit 0 ;;
+               esac
+               ;;
        esac
     fi
 fi
 # Now we simply scan though... In most cases, the SYSTEM info is enough
 #
 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
+    MPE/iX:*)
+       MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
+       echo "parisc-hp-MPE/iX"; exit 0
+       ;;
     A/UX:*)
        echo "m68k-apple-aux3"; exit 0
        ;;
 
-    AIX:*)
+    AIX:[3-9]:4:*)
        echo "${MACHINE}-ibm-aix"; exit 0
        ;;
 
+    AIX:*:[5-9]:*)
+       echo "${MACHINE}-ibm-aix"; exit 0
+       ;;
+
+    AIX:*)
+       echo "${MACHINE}-ibm-aix3"; exit 0
+       ;;
+
+    BeOS:*:BePC)
+    if [ -e /boot/develop/headers/be/bone ]; then
+               echo "beos-x86-bone"; exit 0
+       else
+               echo "beos-x86-r5"; exit 0
+       fi
+       ;;
+
     dgux:*)
        echo "${MACHINE}-dg-dgux"; exit 0
        ;;
@@ -82,11 +141,8 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
     HP-UX:*)
        HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
        case "$HPUXVER" in
-           11.*)
-               echo "${MACHINE}-hp-hpux11"; exit 0
-               ;;
-           10.*)
-               echo "${MACHINE}-hp-hpux10"; exit 0
+           1[0-9].*)   # HPUX 10 and 11 targets are unified
+               echo "${MACHINE}-hp-hpux1x"; exit 0
                ;;
            *)
                echo "${MACHINE}-hp-hpux"; exit 0
@@ -94,12 +150,16 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        esac
        ;;
 
-    IRIX:*)
-       echo "${MACHINE}-sgi-irix"; exit 0
+    IRIX:5.*)
+       echo "mips2-sgi-irix"; exit 0
+       ;;
+
+    IRIX:6.*)
+       echo "mips3-sgi-irix"; exit 0
        ;;
 
     IRIX64:*)
-       echo "${MACHINE}-sgi-irix64"; exit 0
+       echo "mips4-sgi-irix64"; exit 0
        ;;
 
     Linux:[2-9].*)
@@ -110,6 +170,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACHINE}-whatever-linux1"; exit 0
        ;;
 
+    GNU*)
+       echo "hurd-x86"; exit 0;
+       ;;
+
     LynxOS:*)
        echo "${MACHINE}-lynx-lynxos"; exit 0
        ;;
@@ -119,34 +183,43 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        ;;
 
     BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
-       echo "i486-whatever-bsdi"; exit 0
+        case `/sbin/sysctl -n hw.model` in
+           Pentium*)
+                echo "i586-whatever-bsdi"; exit 0
+                ;;
+            *)
+                echo "i386-whatever-bsdi"; exit 0
+                ;;
+            esac;
        ;;
 
     BSD/386:*|BSD/OS:*)
        echo "${MACHINE}-whatever-bsdi"; exit 0
        ;;
 
-    FreeBSD:3*:*:*)
-       echo "${MACHINE}-whatever-freebsd3"; exit 0
-       ;;
-
     FreeBSD:*:*:*386*)
-        case `sysctl -n hw.model` in
-           Pentium*)
-                echo "i586-whatever-freebsd"; exit 0
-                ;;
-            *)
-                echo "i386-whatever-freebsd"; exit 0
-                ;;
-            esac;
-       ;;
+        VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
+        MACH=`sysctl -n hw.model`
+        ARCH='whatever'
+        case ${MACH} in
+           *386*       ) MACH="i386"     ;;
+           *486*       ) MACH="i486"     ;;
+           Pentium\ II*) MACH="i686"     ;;
+           Pentium*    ) MACH="i586"     ;;
+           *           ) MACH="$MACHINE" ;;
+        esac
+        case ${MACH} in
+           i[0-9]86 ) ARCH="pc" ;;
+        esac
+        echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
+        ;;
 
     FreeBSD:*)
        echo "${MACHINE}-whatever-freebsd"; exit 0
        ;;
 
     NetBSD:*:*:*386*)
-        echo "`sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whateve\r-netbsd"; exit 0
+        echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
        ;;
 
     NetBSD:*)
@@ -157,17 +230,35 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACHINE}-whatever-openbsd"; exit 0
        ;;
 
+    OpenUNIX:*)
+       echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+       ;;
+
     OSF1:*:*:*alpha*)
-       echo "${MACHINE}-dec-osf"; exit 0
+       OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
+       case "$OSFMAJOR" in
+           4|5)
+               echo "${MACHINE}-dec-tru64"; exit 0
+               ;;
+           1|2|3)
+               echo "${MACHINE}-dec-osf"; exit 0
+               ;;
+           *)
+               echo "${MACHINE}-dec-osf"; exit 0
+               ;;
+       esac
        ;;
 
     QNX:*)
-       case "$VERSION" in
-           423)
-               echo "${MACHINE}-qssl-qnx32"
+       case "$RELEASE" in
+           4*)
+               echo "${MACHINE}-whatever-qnx4"
+               ;;
+           6*)
+               echo "${MACHINE}-whatever-qnx6"
                ;;
            *)
-               echo "${MACHINE}-qssl-qnx"
+               echo "${MACHINE}-whatever-qnx"
                ;;
        esac
        exit 0
@@ -177,8 +268,24 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "i860-intel-osf1"; exit 0
        ;;
 
+    Rhapsody:*)
+       echo "ppc-apple-rhapsody"; exit 0
+       ;;
+
+    Darwin:*)
+       case "$MACHINE" in
+           Power*)
+               echo "ppc-apple-darwin${VERSION}"
+               ;;
+           *)
+               echo "i686-apple-darwin${VERSION}"
+               ;;
+       esac
+       exit 0
+       ;;
+
     SunOS:5.*)
-       echo "${MACHINE}-sun-solaris2"; exit 0
+       echo "${MACHINE}-whatever-solaris2"; exit 0
        ;;
 
     SunOS:*)
@@ -189,6 +296,14 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACHINE}-whatever-sysv4"; exit 0
        ;;
 
+    VOS:*:*:i786)
+     echo "i386-stratus-vos"; exit 0
+     ;;
+
+    VOS:*:*:*)
+     echo "hppa1.1-stratus-vos"; exit 0
+     ;;
+
     *:4*:R4*:m88k)
        echo "${MACHINE}-whatever-sysv4"; exit 0
        ;;
@@ -225,6 +340,40 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
        ;;
 
+    NEWS-OS:4.*)
+       echo "mips-sony-newsos4"; exit 0;
+       ;;
+
+    MINGW*)
+       echo "${MACHINE}-whatever-mingw"; exit 0;
+       ;;
+    CYGWIN*)
+       case "$RELEASE" in
+           [bB]*|1.0|1.[12].*)
+               echo "${MACHINE}-whatever-cygwin_pre1.3"
+               ;;
+           *)
+               echo "${MACHINE}-whatever-cygwin"
+               ;;
+       esac
+       exit 0
+       ;;
+
+    *"CRAY T3E")
+       echo "t3e-cray-unicosmk"; exit 0;
+       ;;
+
+    *CRAY*)
+       echo "j90-cray-unicos"; exit 0;
+       ;;
+
+    NONSTOP_KERNEL*)
+       echo "nsr-tandem-nsk"; exit 0;
+       ;;
+
+    vxworks*)
+       echo "${MACHINE}-whatever-vxworks"; exit 0;
+       ;;
 esac
 
 #
@@ -233,7 +382,7 @@ esac
 #
 
 # Do the Apollo stuff first. Here, we just simply assume
-# that the existance of the /usr/apollo directory is proof
+# that the existence of the /usr/apollo directory is proof
 # enough
 if [ -d /usr/apollo ]; then
     echo "whatever-apollo-whatever"
@@ -262,48 +411,81 @@ exit 0
 # this is where the translation occurs into SSLeay terms
 # ---------------------------------------------------------------------------
 
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in 
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d    Add a debug- prefix to machine choice.
- -t    Test mode, do not run the Configure perl script.
- -h    This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
+# Only set CC if not supplied already
+if [ -z "$CROSS_COMPILE$CC" ]; then
+  GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
+  if [ "$GCCVER" != "" ]; then
+    # then strip off whatever prefix egcs prepends the number with...
+    # Hopefully, this will work for any future prefixes as well.
+    GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
+    # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
+    # does give us what we want though, so we use that.  We just just the
+    # major and minor version numbers.
+    # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+    GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
+    CC=gcc
+  else
+    CC=cc
+  fi
+fi
+GCCVER=${GCCVER:-0}
+if [ "$SYSTEM" = "HP-UX" ];then
+  # By default gcc is a ILP32 compiler (with long long == 64).
+  GCC_BITS="32"
+  if [ $GCCVER -ge 30 ]; then
+    # PA64 support only came in with gcc 3.0.x.
+    # We check if the preprocessor symbol __LP64__ is defined...
+    if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
+      : # __LP64__ has slipped through, it therefore is not defined
+    else
+      GCC_BITS="64"
+    fi
+  fi
+fi
+if [ "$SYSTEM" = "SunOS" ]; then
+  if [ $GCCVER -ge 30 ]; then
+    # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
+    # to be working, at the very least 'make test' passes...
+    if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
+      GCC_ARCH="-m64"
+    else
+      GCC_ARCH="-m32"
+    fi
+  fi
+  # check for WorkShop C, expected output is "cc: blah-blah C x.x"
+  CCVER=`(cc -V 2>&1) 2>/dev/null | \
+       egrep -e '^cc: .* C [0-9]\.[0-9]' | \
+       sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
+  CCVER=${CCVER:-0}
+  if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
+    CC=cc      # overrides gcc!!!
+    if [ $CCVER -eq 50 ]; then
+      echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
+      echo "         patch #107357-01 or later applied."
+      sleep 5
+    fi
+  fi
+fi
 
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
-GCCVER=`(gcc -v) 2>&1`
-if [ $? = "0" ]; then
-  CC=gcc
-else
-  CC=cc
-  if [ "$SYSTEM" = "SunOS" ]
-  then
-   case `cc -V 2>&1` in
-    *4*) CC=cc;;
-    *5*) CC=cc;;
-    *) CC=sc3;;
-   esac
+if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
+  # check for Compaq C, expected output is "blah-blah C Vx.x"
+  CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
+       egrep -e '.* C V[0-9]\.[0-9]' | \
+       sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
+  CCCVER=${CCCVER:-0}
+  if [ $CCCVER -gt 60 ]; then
+    CC=ccc     # overrides gcc!!! well, ccc outperforms inoticeably
+               # only on hash routines and des, otherwise gcc (2.95)
+               # keeps along rather tight...
   fi
 fi
 
+if [ "${SYSTEM}" = "AIX" ]; then       # favor vendor cc over gcc
+    (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
+fi
+
+CCVER=${CCVER:-0}
+
 # read the output of the embedded GuessOS 
 read GUESSOS
 
@@ -313,57 +495,417 @@ echo Operating system: $GUESSOS
 # script above so we end up with values in vars but that would take
 # more time that I want to waste at the moment
 case "$GUESSOS" in
-  alpha-*-linux2) OUT="alpha-gcc" ;;
+  uClinux*64*)
+    OUT=uClinux-dist64
+       ;;
+  uClinux*)
+    OUT=uClinux-dist
+       ;;
+  mips2-sgi-irix)
+       CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+       CPU=${CPU:-0}
+       if [ $CPU -ge 4000 ]; then
+               options="$options -mips2"
+       fi
+       OUT="irix-$CC"
+       ;;
+  mips3-sgi-irix)
+       #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+       #CPU=${CPU:-0}
+       #if [ $CPU -ge 5000 ]; then
+       #       options="$options -mips4"
+       #else
+       #       options="$options -mips3"
+       #fi
+       OUT="irix-mips3-$CC"
+       ;;
+  mips4-sgi-irix64)
+       echo "WARNING! If you wish to build 64-bit library, then you have to"
+       echo "         invoke './Configure irix64-mips4-$CC' *manually*."
+       if [ "$TEST" = "false" -a -t 1 ]; then
+         echo "         You have about 5 seconds to press Ctrl-C to abort."
+         (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+       fi
+        #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+        #CPU=${CPU:-0}
+        #if [ $CPU -ge 5000 ]; then
+        #        options="$options -mips4"
+        #else
+        #        options="$options -mips3"
+        #fi
+       OUT="irix-mips3-$CC"
+       ;;
+  ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
+  ppc-apple-darwin*)
+       ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
+       if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure darwin64-ppc-cc' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+             echo "         You have about 5 seconds to press Ctrl-C to abort."
+             (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+           OUT="darwin64-ppc-cc"
+       else
+           OUT="darwin-ppc-cc"
+       fi ;;
+  i?86-apple-darwin*)
+       ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
+       if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure darwin64-x86_64-cc' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+             echo "         You have about 5 seconds to press Ctrl-C to abort."
+             (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+           OUT="darwin64-x86_64-cc"
+       else
+           OUT="darwin-i386-cc"
+       fi ;;
+  armv6+7-*-iphoneos)
+       options="$options -arch%20armv6 -arch%20armv7"
+       OUT="iphoneos-cross" ;;
+  *-*-iphoneos)
+       options="$options -arch%20${MACHINE}"
+       OUT="iphoneos-cross" ;;
+  alpha-*-linux2)
+        ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
+       case ${ISA:-generic} in
+       *[678]) OUT="linux-alpha+bwx-$CC" ;;
+       *)      OUT="linux-alpha-$CC" ;;
+       esac
+       if [ "$CC" = "gcc" ]; then
+           case ${ISA:-generic} in
+           EV5|EV45)           options="$options -mcpu=ev5";;
+           EV56|PCA56)         options="$options -mcpu=ev56";;
+           *)                  options="$options -mcpu=ev6";;
+           esac
+       fi
+       ;;
+  ppc64-*-linux2)
+       if [ -z "$KERNEL_BITS" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure linux-ppc64' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+               echo "         You have about 5 seconds to press Ctrl-C to abort."
+               (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       if [ "$KERNEL_BITS" = "64" ]; then
+           OUT="linux-ppc64"
+       else
+           OUT="linux-ppc"
+           (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32"
+       fi
+       ;;
+  ppc64le-*-linux2) OUT="linux-ppc64le" ;;
   ppc-*-linux2) OUT="linux-ppc" ;;
-  mips-*-linux?) OUT="linux-mips" ;;
-  sparc-*-linux2) OUT="linux-sparc" ;;
-  sparc64-*-linux2) OUT="linux-sparc64" ;;
-  *-*-linux2) OUT="linux-elf" ;;
+  mips64*-*-linux2)
+       echo "WARNING! If you wish to build 64-bit library, then you have to"
+       echo "         invoke './Configure linux64-mips64' *manually*."
+       if [ "$TEST" = "false" -a -t 1 ]; then
+           echo "         You have about 5 seconds to press Ctrl-C to abort."
+           (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+       fi
+       OUT="linux-mips64"
+       ;;
+  mips*-*-linux2) OUT="linux-mips32" ;;
+  ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
+  ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
+  pentium-*-vxworks*) OUT="vxworks-pentium" ;;
+  simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
+  mips-*-vxworks*) OUT="vxworks-mips";;
+  ia64-*-linux?) OUT="linux-ia64" ;;
+  sparc64-*-linux2)
+       echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+       echo "         and wish to build 64-bit library, then you have to"
+       echo "         invoke './Configure linux64-sparcv9' *manually*."
+       if [ "$TEST" = "false" -a -t 1 ]; then
+         echo "          You have about 5 seconds to press Ctrl-C to abort."
+         (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+       fi
+       OUT="linux-sparcv9" ;;
+  sparc-*-linux2)
+       KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
+       case ${KARCH:-sun4} in
+       sun4u*) OUT="linux-sparcv9" ;;
+       sun4m)  OUT="linux-sparcv8" ;;
+       sun4d)  OUT="linux-sparcv8" ;;
+       *)      OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+       esac ;;
+  parisc*-*-linux2)
+       # 64-bit builds under parisc64 linux are not supported and
+       # compiler is expected to generate 32-bit objects...
+       CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
+       CPUSCHEDULE=`awk '/^cpu.[       ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
+
+       # ??TODO ??  Model transformations
+       # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+       #    assuming no further arch. identification will ever be used by GCC.
+       # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+       # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+       #    for these chips in the future.
+       #         PA7300LC -> 7100LC (1.1)
+       #         PA8200   -> 8000   (2.0)
+       #         PA8500   -> 8000   (2.0)
+       #         PA8600   -> 8000   (2.0)
+
+       CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
+       # Finish Model transformations
+
+       options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+       OUT="linux-generic32" ;;
+  armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+  armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
+  arm*-*-linux2) OUT="linux-armv4" ;;
+  sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+  sh*-*-linux2)  OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
+  m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+  s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+  s390x-*-linux2)
+       # To be uncommented when glibc bug is fixed, see Configure...
+       #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
+       #  echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
+       #  echo "         have to invoke './Configure linux32-s390x' *manually*."
+       #  if [ "$TEST" = "false" -a -t -1 ]; then
+       #    echo "         You have about 5 seconds to press Ctrl-C to abort."
+       #    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+       #  fi
+       #fi
+       OUT="linux64-s390x"
+       ;;
+  x86_64-*-linux?) OUT="linux-x86_64" ;;
+  *86-*-linux2) OUT="linux-elf"
+       if [ "$GCCVER" -gt 28 ]; then
+          if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
+           options="$options -march=pentium"
+          fi
+          if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
+           options="$options -march=pentiumpro"
+          fi
+          if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
+           options="$options -march=k6"
+          fi
+        fi ;;
   *-*-linux1) OUT="linux-aout" ;;
-  sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
-  sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
-  *86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
-  *-*-sunos4) OUT="sunos-$CC" ;;
-  alpha*-*-freebsd3) OUT="FreeBSD-alpha" ;;
-  *-freebsd3) OUT="FreeBSD-elf" ;;
-  *-freebsd) OUT="FreeBSD" ;;
-  *86*-*-netbsd) OUT="NetBSD-x86" ;;
-  sun3*-*-netbsd) OUT="NetBSD-m68" ;;
-  *-*-netbsd) OUT="NetBSD-sparc" ;;
-  *86*-*-openbsd) OUT="OpenBSD-x86" ;;
-  alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
-  pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
-  *-*-openbsd) OUT="OpenBSD" ;;
-  *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
-  *-*-osf) OUT="alpha-cc" ;;
-  *-*-unixware*) OUT="unixware-2.0" ;;
+  *-*-linux2) OUT="linux-generic32" ;;
+  sun4[uv]*-*-solaris2)
+       OUT="solaris-sparcv9-$CC"
+       ISA64=`(isalist) 2>/dev/null | grep sparcv9`
+       if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
+           if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
+               echo "WARNING! If you wish to build 64-bit library, then you have to"
+               echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
+               if [ "$TEST" = "false" -a -t 1 ]; then
+                 echo "         You have about 5 seconds to press Ctrl-C to abort."
+                 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+               fi
+           elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
+               # $GCC_ARCH denotes default ABI chosen by compiler driver
+               # (first one found on the $PATH). I assume that user
+               # expects certain consistency with the rest of his builds
+               # and therefore switch over to 64-bit. <appro>
+               OUT="solaris64-sparcv9-gcc"
+               echo "WARNING! If you wish to build 32-bit library, then you have to"
+               echo "         invoke './Configure solaris-sparcv9-gcc' *manually*."
+               if [ "$TEST" = "false" -a -t 1 ]; then
+                 echo "         You have about 5 seconds to press Ctrl-C to abort."
+                 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+               fi
+           elif [ "$GCC_ARCH" = "-m32" ]; then
+               echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
+               echo "        and wish to build 64-bit library, then you have to"
+               echo "        invoke './Configure solaris64-sparcv9-gcc' *manually*."
+               if [ "$TEST" = "false" -a -t 1 ]; then
+                 echo "         You have about 5 seconds to press Ctrl-C to abort."
+                 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+               fi
+           fi
+       fi
+       if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
+           OUT="solaris64-sparcv9-$CC"
+       fi
+       ;;
+  sun4m-*-solaris2)    OUT="solaris-sparcv8-$CC" ;;
+  sun4d-*-solaris2)    OUT="solaris-sparcv8-$CC" ;;
+  sun4*-*-solaris2)    OUT="solaris-sparcv7-$CC" ;;
+  *86*-*-solaris2)
+       ISA64=`(isalist) 2>/dev/null | grep amd64`
+       if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
+           OUT="solaris64-x86_64-$CC"
+       else
+           OUT="solaris-x86-$CC"
+           if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
+               options="$options no-sse2"
+           fi
+       fi
+       ;;
+  *-*-sunos4)          OUT="sunos-$CC" ;;
+
+  *86*-*-bsdi4)                OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
+  alpha*-*-*bsd*)      OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
+  powerpc64-*-*bsd*)   OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
+  sparc64-*-*bsd*)     OUT="BSD-sparc64" ;;
+  ia64-*-*bsd*)                OUT="BSD-ia64" ;;
+  amd64-*-*bsd*)       OUT="BSD-x86_64" ;;
+  *86*-*-*bsd*)                # mimic ld behaviour when it's looking for libc...
+                       if [ -L /usr/lib/libc.so ]; then        # [Free|Net]BSD
+                           libc=/usr/lib/libc.so
+                       else                                    # OpenBSD
+                           # ld searches for highest libc.so.* and so do we
+                           libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null`
+                       fi
+                       case "`(file -L $libc) 2>/dev/null`" in
+                       *ELF*)  OUT="BSD-x86-elf" ;;
+                       *)      OUT="BSD-x86"; options="$options no-sse2" ;;
+                       esac ;;
+  *-*-*bsd*)           OUT="BSD-generic32" ;;
+
+  *-*-osf)             OUT="osf1-alpha-cc" ;;
+  *-*-tru64)           OUT="tru64-alpha-cc" ;;
+  *-*-[Uu]nix[Ww]are7)
+       if [ "$CC" = "gcc" ]; then
+         OUT="unixware-7-gcc" ; options="$options no-sse2"
+       else    
+         OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
+       fi
+       ;;
+  *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
+  *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
+  *-*-vos)
+       options="$options no-threads no-shared no-asm no-dso"
+       EXE=".pm"
+       OUT="vos-$CC" ;;
   BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
   RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
   *-siemens-sysv4) OUT="SINIX" ;;
+  *-hpux1*)
+       if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
+           OUT="hpux64-parisc2-gcc"
+       fi
+       [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+       KERNEL_BITS=${KERNEL_BITS:-32}
+       CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
+       CPU_VERSION=${CPU_VERSION:-0}
+       # See <sys/unistd.h> for further info on CPU_VERSION.
+       if   [ $CPU_VERSION -ge 768 ]; then     # IA-64 CPU
+            if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+               OUT="hpux64-ia64-cc"
+             else
+               OUT="hpux-ia64-cc"
+             fi
+       elif [ $CPU_VERSION -ge 532 ]; then     # PA-RISC 2.x CPU
+            OUT=${OUT:-"hpux-parisc2-${CC}"}
+            if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+               echo "WARNING! If you wish to build 64-bit library then you have to"
+               echo "         invoke './Configure hpux64-parisc2-cc' *manually*."
+               if [ "$TEST" = "false" -a -t 1 ]; then
+                 echo "         You have about 5 seconds to press Ctrl-C to abort."
+                 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+               fi
+            fi
+       elif [ $CPU_VERSION -ge 528 ]; then     # PA-RISC 1.1+ CPU
+            OUT="hpux-parisc-${CC}"
+       elif [ $CPU_VERSION -ge 523 ]; then     # PA-RISC 1.0 CPU
+            OUT="hpux-parisc-${CC}"
+       else                                    # Motorola(?) CPU
+            OUT="hpux-$CC"
+       fi
+       options="$options -D_REENTRANT" ;;
+  *-hpux)      OUT="hpux-parisc-$CC" ;;
+  *-aix)
+       [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+       KERNEL_BITS=${KERNEL_BITS:-32}
+       OBJECT_MODE=${OBJECT_MODE:-32}
+       if [ "$CC" = "gcc" ]; then
+           OUT="aix-gcc"
+          if [ $OBJECT_MODE -eq 64 ]; then
+            echo 'Your $OBJECT_MODE was found to be set to 64'
+            OUT="aix64-gcc"
+          fi
+       elif [ $OBJECT_MODE -eq 64 ]; then
+           echo 'Your $OBJECT_MODE was found to be set to 64' 
+           OUT="aix64-cc"
+       else
+           OUT="aix-cc"
+           if [ $KERNEL_BITS -eq 64 ]; then
+               echo "WARNING! If you wish to build 64-bit kit, then you have to"
+               echo "         invoke './Configure aix64-cc' *manually*."
+               if [ "$TEST" = "false" -a -t 1 ]; then
+                   echo "         You have ~5 seconds to press Ctrl-C to abort."
+                   (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+               fi
+           fi
+       fi
+       if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
+           :   # this applies even to Power3 and later, as they return PowerPC_POWER[345]
+       else
+           options="$options no-asm"
+       fi
+       ;;
   # these are all covered by the catchall below
-  # *-hpux*) OUT="hpux-$CC" ;;
-  # *-aix) OUT="aix-$CC" ;;
   # *-dgux) OUT="dgux" ;;
+  mips-sony-newsos4) OUT="newsos4-gcc" ;;
+  *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+  *-*-cygwin) OUT="Cygwin" ;;
+  t3e-cray-unicosmk) OUT="cray-t3e" ;;
+  j90-cray-unicos) OUT="cray-j90" ;;
+  nsr-tandem-nsk) OUT="tandem-c89" ;;
+  beos-*) OUT="$GUESSOS" ;;
+  x86pc-*-qnx6) OUT="QNX6-i386" ;;
+  *-*-qnx6) OUT="QNX6" ;;
+  x86-*-android|i?86-*-android) OUT="android-x86" ;;
+  armv[7-9]*-*-android) OUT="android-armv7" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
-# gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-usparc-gcc ]
+# NB: This atalla support has been superseded by the ENGINE support
+# That contains its own header and definitions anyway. Support can
+# be enabled or disabled on any supported platform without external
+# headers, eg. by adding the "hw-atalla" switch to ./config or
+# perl Configure
+#
+# See whether we can compile Atalla support
+#if [ -f /usr/include/atasi.h ]
+#then
+#  options="$options -DATALLA"
+#fi
+
+if [ -n "$CONFIG_OPTIONS" ]; then
+  options="$options $CONFIG_OPTIONS"
+fi
+
+if expr "$options" : '.*no\-asm' > /dev/null; then :; else
+  sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
+  grep \\--noexecstack >/dev/null && \
+  options="$options -Wa,--noexecstack"
+fi
+
+# gcc < 2.8 does not support -march=ultrasparc
+if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
+then
+  echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
+  echo "         Upgrade to gcc-2.8 or later."
+  sleep 5
+  OUT=solaris-sparcv8-gcc
+fi
+if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
 then
- GCCVERMAJOR="`echo $GCCVER | sed 's/.*version \([^.]*\).*/\1/`"
- GCCVERMINOR="`echo $GCCVER | sed 's/.*version[^.]*\.\([^.]*\).*/\1/`"
- echo "gcc version $GCCVERMAJOR.$GCCVERMINOR.x"
- if [ $GCCVERMAJOR$GCCVERMINOR -lt 28 ]
- then
-  OUT=solaris-usparc-oldgcc
- fi
+  echo "WARNING! Falling down to 'linux-sparcv8'."
+  echo "         Upgrade to gcc-2.8 or later."
+  sleep 5
+  OUT=linux-sparcv8
 fi
 
 case "$GUESSOS" in
   i386-*) options="$options 386" ;;
 esac
 
-for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 rsa sha
+for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
 do
   if [ ! -d crypto/$i ]
   then
@@ -371,14 +913,35 @@ do
   fi
 done
 
+# Discover Kerberos 5 (since it's still a prototype, we don't
+# do any guesses yet, that's why this section is commented away.
+#if [ -d /usr/kerberos ]; then
+#    krb5_dir=/usr/kerberos
+#    if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
+#      -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
+#      -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
+#      -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
+#      -a \( -f $krb5_dir/include/krb5.h \) ]; then
+#      options="$options --with-krb5-flavor=MIT"
+#    fi
+#elif [ -d /usr/heimdal ]; then
+#    krb5_dir=/usr/heimdal
+#    if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
+#      -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
+#      -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
+#      -a \( -f $krb5_dir/include/krb5.h \) ]; then
+#      options="$options --with-krb5-flavor=Heimdal"
+#    fi
+#fi
+
 if [ -z "$OUT" ]; then
   OUT="$CC"
 fi
 
 if [ ".$PERL" = . ] ; then
        for i in . `echo $PATH | sed 's/:/ /g'`; do
-               if [ -f "$i/perl5" ] ; then
-                       PERL="$i/perl5"
+               if [ -f "$i/perl5$EXE" ] ; then
+                       PERL="$i/perl5$EXE"
                        break;
                fi;
        done
@@ -386,9 +949,9 @@ fi
 
 if [ ".$PERL" = . ] ; then
        for i in . `echo $PATH | sed 's/:/ /g'`; do
-               if [ -f "$i/perl" ] ; then
-                       if "$i/perl" -e 'exit($]<5.0)'; then
-                               PERL="$i/perl"
+               if [ -f "$i/perl$EXE" ] ; then
+                       if "$i/perl$EXE" -e 'exit($]<5.0)'; then
+                               PERL="$i/perl$EXE"
                                break;
                        fi;
                fi;
@@ -404,14 +967,14 @@ fi
 # compiler for the platform ... in which case we add it on
 # the end ... otherwise we leave it off
 
-$PERL ./Configure 2>&1 | grep "$OUT-$CC" > /dev/null
+$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
 if [ $? = "0" ]; then
   OUT="$OUT-$CC"
 fi
 
 OUT="$PREFIX$OUT"
 
-$PERL ./Configure 2>&1 | grep "$OUT" > /dev/null
+$PERL ./Configure LIST | grep "$OUT" > /dev/null
 if [ $? = "0" ]; then
   echo Configuring for $OUT