# First get uname entries that we use below
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
# Now test for ISC and SCO, since it is has a braindamaged uname.
echo "ppc-apple-darwin${VERSION}"
;;
*)
- echo "i386-apple-darwin${VERSION}"
+ echo "i686-apple-darwin${VERSION}"
;;
esac
exit 0
NONSTOP_KERNEL*)
echo "nsr-tandem-nsk"; exit 0;
;;
+
+ vxworks*)
+ echo "${MACHINE}-whatever-vxworks"; exit 0;
+ ;;
esac
#
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
-GCCVER=`(gcc -dumpversion) 2>/dev/null`
+if [ -z "$GCCVER" ]; then
+ GCCVER=`(gcc -dumpversion) 2>/dev/null`
+fi
if [ "$GCCVER" != "" ]; then
- CC=gcc
# then strip off whatever prefix egcs prepends the number with...
# Hopefully, this will work for any future prefixes as well.
GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
# major and minor version numbers.
# peak single digit before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-else
- CC=cc
+fi
+
+# Only set CC if not supplied already
+if [ -z "$CC" ]; then
+# figure out if gcc is available and if so we use it otherwise
+# we fallback to whatever cc does on the system
+ if [ "$GCCVER" != "" ]; then
+ CC=gcc
+ else
+ CC=cc
+ fi
fi
GCCVER=${GCCVER:-0}
if [ "$SYSTEM" = "HP-UX" ];then
# script above so we end up with values in vars but that would take
# more time that I want to waste at the moment
case "$GUESSOS" in
+ uClinux*64*)
+ OUT=uClinux-dist64
+ ;;
+ uClinux*)
+ OUT=uClinux-dist
+ ;;
mips2-sgi-irix)
CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
OUT="irix-mips3-$CC"
;;
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
- ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
- i386-apple-darwin*) OUT="darwin-i386-cc" ;;
+ ppc-apple-darwin*)
+ ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
+ if [ "$ISA64" = "1" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configure darwin64-ppc-cc' *manually*."
+ if [ "$TEST" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ OUT="darwin-ppc-cc" ;;
+ i?86-apple-darwin*)
+ ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
+ if [ "$ISA64" = "1" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configure darwin64-x86_64-cc' *manually*."
+ if [ "$TEST" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ OUT="darwin-i386-cc" ;;
alpha-*-linux2)
ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
case ${ISA:-generic} in
esac
if [ "$CC" = "gcc" ]; then
case ${ISA:-generic} in
- EV5|EV45) options="$options -march=ev5";;
- EV56|PCA56) options="$options -march=ev56";;
- *) options="$options -march=ev6";;
+ EV5|EV45) options="$options -mcpu=ev5";;
+ EV56|PCA56) options="$options -mcpu=ev56";;
+ *) options="$options -mcpu=ev6";;
esac
fi
;;
OUT="linux-ppc"
;;
ppc-*-linux2) OUT="linux-ppc" ;;
+ ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
+ ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
+ pentium-*-vxworks*) OUT="vxworks-pentium" ;;
+ simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
+ mips-*-vxworks*) OUT="vxworks-mips";;
ia64-*-linux?) OUT="linux-ia64" ;;
sparc64-*-linux2)
echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
OUT="linux-generic32" ;;
- arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
- arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
+ armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+ armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
+ arm*-*-linux2) OUT="linux-armv4" ;;
sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
- s390x-*-linux2) OUT="linux-s390x" ;;
+ s390x-*-linux2)
+ # To be uncommented when glibc bug is fixed, see Configure...
+ #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
+ # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
+ # echo " have to invoke './Configure linux32-s390x' *manually*."
+ # if [ "$TEST" = "false" -a -t -1 ]; then
+ # echo " You have about 5 seconds to press Ctrl-C to abort."
+ # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ # fi
+ #fi
+ OUT="linux64-s390x"
+ ;;
x86_64-*-linux?) OUT="linux-x86_64" ;;
*86-*-linux2) OUT="linux-elf"
if [ "$GCCVER" -gt 28 ]; then
fi ;;
*-*-linux1) OUT="linux-aout" ;;
*-*-linux2) OUT="linux-generic32" ;;
- sun4u*-*-solaris2)
+ sun4[uv]*-*-solaris2)
OUT="solaris-sparcv9-$CC"
ISA64=`(isalist) 2>/dev/null | grep sparcv9`
if [ "$ISA64" != "" ]; then
*-*-sunos4) OUT="sunos-$CC" ;;
*86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
- alpha*-*-*bsd*) OUT="BSD-generic64; options="$options -DL_ENDIAN" ;;
- powerpc64-*-*bsd*) OUT="BSD-generic64; options="$options -DB_ENDIAN" ;;
+ alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
+ powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
ia64-*-*bsd*) OUT="BSD-ia64" ;;
amd64-*-*bsd*) OUT="BSD-x86_64" ;;
if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
OUT="hpux64-parisc2-gcc"
fi
- KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+ [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
KERNEL_BITS=${KERNEL_BITS:-32}
CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
CPU_VERSION=${CPU_VERSION:-0}
# See <sys/unistd.h> for further info on CPU_VERSION.
if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
- echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
- echo " If you wish to build 32-bit library, the you have to"
- echo " invoke './Configure hpux-ia64-cc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
- fi
- OUT="hpux64-ia64-cc"
+ if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+ OUT="hpux64-ia64-cc"
+ else
+ OUT="hpux-ia64-cc"
+ fi
elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
OUT=${OUT:-"hpux-parisc2-${CC}"}
if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
options="$options -D_REENTRANT" ;;
*-hpux) OUT="hpux-parisc-$CC" ;;
*-aix)
- KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+ [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
KERNEL_BITS=${KERNEL_BITS:-32}
OBJECT_MODE=${OBJECT_MODE:-32}
if [ "$CC" = "gcc" ]; then
OUT="aix-gcc"
+ if [ $OBJECT_MODE -eq 64 ]; then
+ echo 'Your $OBJECT_MODE was found to be set to 64'
+ OUT="aix64-gcc"
+ fi
elif [ $OBJECT_MODE -eq 64 ]; then
echo 'Your $OBJECT_MODE was found to be set to 64'
OUT="aix64-cc"
j90-cray-unicos) OUT="cray-j90" ;;
nsr-tandem-nsk) OUT="tandem-c89" ;;
beos-*) OUT="$GUESSOS" ;;
+ x86pc-*-qnx6) OUT="QNX6-i386" ;;
+ *-*-qnx6) OUT="QNX6" ;;
+ x86-*-android|i?86-*-android) OUT="android-x86" ;;
+ armv[7-9]*-*-android) OUT="android-armv7" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
# options="$options -DATALLA"
#fi
+if [ -n "$CONFIG_OPTIONS" ]; then
+ options="$options $CONFIG_OPTIONS"
+fi
+
+if [ -z "$CONFIG_SKIP_NOEXECSTACK" ]; then
+ ! expr "$options" : '.*no\-asm' > /dev/null && \
+ ($CC -Wa,--help -c -o /dev/null -x assembler /dev/null 2>&1 | \
+ grep \\--noexecstack) 2>&1 > /dev/null && \
+ options="$options -Wa,--noexecstack"
+fi
+
# gcc < 2.8 does not support -march=ultrasparc
if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
then
projects / openssl.git / blobdiff