esac
;;
- IRIX:*)
- echo "${MACHINE}-sgi-irix"; exit 0
+ IRIX:5.*)
+ echo "mips2-sgi-irix"; exit 0
+ ;;
+
+ IRIX:6.*)
+ echo "mips3-sgi-irix"; exit 0
;;
IRIX64:*)
- echo "${MACHINE}-sgi-irix64"; exit 0
+ echo "mips4-sgi-irix64"; exit 0
;;
Linux:[2-9].*)
echo "${MACHINE}-whatever-bsdi"; exit 0
;;
- FreeBSD:*:*:*386*)
- case `sysctl -n hw.model` in
- Pentium*)
- echo "i586-whatever-freebsd"; exit 0
- ;;
- *)
- echo "i386-whatever-freebsd"; exit 0
- ;;
- esac;
- ;;
-
FreeBSD:*)
- echo "${MACHINE}-whatever-freebsd"; exit 0
- ;;
+ VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
+ MACH=`sysctl -n hw.model`
+ ARCH='whatever'
+ case ${MACH} in
+ *386* ) MACH="i386" ;;
+ *486* ) MACH="i486" ;;
+ Pentium\ II*) MACH="i686" ;;
+ Pentium* ) MACH="i586" ;;
+ Alpha* ) MACH="alpha" ;;
+ * ) MACH="$MACHINE" ;;
+ esac
+ case ${MACH} in
+ i[0-9]86 ) ARCH="pc" ;;
+ esac
+ echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
+ ;;
NetBSD:*:*:*386*)
echo "`sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whateve\r-netbsd"; exit 0
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc -v) 2>&1`
-if [ $? = "0" ]; then
+GCCVER=`(gcc --version) 2>/dev/null`
+if [ "$GCCVER" != "" ]; then
CC=gcc
+ # then strip off whatever prefix Cygnus prepends the number with...
+ GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+ # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+ GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
- if [ "$SYSTEM" = "SunOS" ]
- then
- case `cc -V 2>&1` in
- *4*) CC=cc;;
- *5*) CC=cc;;
- *) CC=sc3;;
- esac
+fi
+
+if [ "$SYSTEM" = "SunOS" ]; then
+ # check for WorkShop C, expected output is "cc: blah-blah C x.x"
+ CCVER=`(cc -V 2>&1) 2>/dev/null | \
+ egrep -e '^cc: .* C [0-9]\.[0-9]' | \
+ sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CCVER=${CCVER:-0}
+ if [ $CCVER -gt 40 ]; then
+ CC=cc # overrides gcc!!!
+ if [ $CCVER -eq 50 ]; then
+ echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
+ echo " patch #107357-01 or later applied."
+ sleep 5
+ fi
+ elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
+ CC=sc3
+ fi
+fi
+
+if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
+ # check for Compaq C, expected output is "blah-blah C Vx.x"
+ CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
+ egrep -e '.* C V[0-9]\.[0-9]' | \
+ sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CCCVER=${CCCVER:-0}
+ if [ $CCCVER -gt 60 ]; then
+ CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
+ # only on hash routines and des, otherwise gcc (2.95)
+ # keeps along rather tight...
fi
fi
+GCCVER=${GCCVER:-0}
+CCVER=${CCVER:-0}
+
# read the output of the embedded GuessOS
read GUESSOS
# script above so we end up with values in vars but that would take
# more time that I want to waste at the moment
case "$GUESSOS" in
- alpha-*-linux2) OUT="alpha-gcc" ;;
- ppc-*-linux2) OUT="linux-ppc" ;;
+ mips2-sgi-irix)
+ CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=${CPU:-0}
+ if [ $CPU -ge 4000 ]; then
+ options="$options -mips2"
+ fi
+ OUT="irix-$CC"
+ ;;
+ mips3-sgi-irix)
+ CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=${CPU:-0}
+ if [ $CPU -ge 5000 ]; then
+ options="$options -mips4"
+ else
+ options="$options -mips3"
+ fi
+ OUT="irix-mips3-$CC"
+ ;;
+ mips4-sgi-irix64)
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configre irix64-mips4-$CC' *manually*."
+ echo " Type Ctrl-C if you don't want to continue."
+ read waste < /dev/tty
+ options="$options -mips4"
+ OUT="irix-mips3-$CC"
+ ;;
+ alpha-*-linux2)
+ ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
+ case ${ISA:-generic} in
+ *[67]) OUT="linux-alpha+bwx-$CC" ;;
+ *) OUT="linux-alpha-$CC" ;;
+ esac
+ if [ "$CC" = "gcc" ]; then
+ case ${ISA:-generic} in
+ EV5|EV45) options="$options -mcpu=ev5";;
+ EV56|PCA56) options="$options -mcpu=ev56";;
+ EV6|EV67|PCA57) options="$options -mcpu=ev6";;
+ esac
+ fi
+ ;;
mips-*-linux?) OUT="linux-mips" ;;
- sparc-*-linux2) OUT="linux-sparc" ;;
- sparc64-*-linux2) OUT="linux-sparc64" ;;
+ ppc-*-linux2) OUT="linux-ppc" ;;
+ sparc64-*-linux2)
+ #Before we can uncomment following lines we have to wait at least
+ #till 64-bit glibc for SPARC is operational:-(
+ #echo "WARNING! If you wish to build 64-bit library, then you have to"
+ #echo " invoke './Configure linux64-sparcv9' *manually*."
+ #echo " Type Ctrl-C if you don't want to continue."
+ #read waste < /dev/tty
+ OUT="linux-sparcv9" ;;
+ sparc-*-linux2)
+ KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+ case ${KARCH:-sun4} in
+ sun4u*) OUT="linux-sparcv9" ;;
+ sun4m) OUT="linux-sparcv8" ;;
+ sun4d) OUT="linux-sparcv8" ;;
+ *) OUT="linux-sparcv7" ;;
+ esac ;;
*-*-linux2) OUT="linux-elf" ;;
*-*-linux1) OUT="linux-aout" ;;
- sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
- sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
+ sun4u*-sun-solaris2)
+ ISA64=`(isalist) 2>/dev/null | grep sparcv9`
+ if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
+ echo " Type Ctrl-C if you don't want to continue."
+ read waste < /dev/tty
+ fi
+ OUT="solaris-sparcv9-$CC" ;;
+ sun4m-sun-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4d-sun-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4*-sun-solaris2) OUT="solaris-sparcv7-$CC" ;;
*86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
- alpha*-*-freebsd) OUT="FreeBSD-alpha" ;;
- *-freebsd) OUT="FreeBSD" ;;
+ alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+ *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
+ *-freebsd[1-2]*) OUT="FreeBSD" ;;
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
*-*-netbsd) OUT="NetBSD-sparc" ;;
*86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
*-*-osf) OUT="alpha-cc" ;;
*-*-unixware*) OUT="unixware-2.0" ;;
+ *-*-UnixWare*) OUT="unixware-2.0" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
esac
# gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-usparc-gcc ]
+if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
+then
+ echo "WARNING! Do consider upgrading to gcc-2.8 or later."
+ sleep 5
+ OUT=solaris-sparcv9-gcc27
+fi
+if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
+then
+ echo "WARNING! Falling down to 'linux-sparcv8'."
+ echo " Upgrade to gcc-2.8 or later."
+ sleep 5
+ OUT=linux-sparcv8
+fi
+if [ "$OUT" = "i86pc-sun-solaris2" ]
then
- GCCVERMAJOR="`echo $GCCVER | sed 's/.*version \([^.]*\).*/\1/`"
- GCCVERMINOR="`echo $GCCVER | sed 's/.*version[^.]*\.\([^.]*\).*/\1/`"
- echo "gcc version $GCCVERMAJOR.$GCCVERMINOR.x"
- case "$GCCVERMAJOR" in
- egcs*)
- ;;
- *)
- if [ $GCCVERMAJOR$GCCVERMINOR -lt 28 ]
- then
- OUT=solaris-usparc-oldgcc
- fi
- ;;
+ ASM=`as -V /dev/null 2>&1`
+ case "$ASM" in
+ GNU*) ;;
+ *) options="$options no-asm" ; echo "WARNING: You need the GNU assembler to use OpenSSL assembler code." ; echo "Sun as is not supported on Solaris x86." ;;
esac
fi
projects / openssl.git / blobdiff