-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- * software must display the following acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- * endorse or promote products derived from this software without
- * prior written permission. For written permission, please contact
- * openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- * nor may "OpenSSL" appear in their names without prior written
- * permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- * acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com). This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
+/*
+ * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved.
*
+ * Licensed under the OpenSSL license (the "License"). You may not use
+ * this file except in compliance with the License. You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
*/
+
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
#include <errno.h>
#include <openssl/e_os2.h>
+#ifndef OPENSSL_NO_SOCK
+
/*
* With IPv6, it looks like Digital has mixed up the proper order of
* recursive header file inclusion, resulting in the compiler complaining
extern int verify_quiet;
static char *prog;
-static int async = 0;
-static unsigned int split_send_fragment = 0;
-static unsigned int max_pipelines = 0;
static int c_nbio = 0;
static int c_tlsextdebug = 0;
static int c_status_req = 0;
static int c_brief = 0;
static void print_stuff(BIO *berr, SSL *con, int full);
+#ifndef OPENSSL_NO_OCSP
static int ocsp_resp_cb(SSL *s, void *arg);
+#endif
static int saved_errno;
case SSL_ERROR_WANT_READ:
case SSL_ERROR_WANT_WRITE:
case SSL_ERROR_WANT_ASYNC:
+ case SSL_ERROR_WANT_ASYNC_JOB:
/* We just do busy waiting. Nothing clever */
continue;
}
int msg; /* copy from c_msg */
int debug; /* copy from c_debug */
int amp; /* allow more groups */
- int strength /* minimal size for N */ ;
+ int strength; /* minimal size for N */
} SRP_ARG;
# define SRP_NUMBER_ITERATIONS_FOR_PRIME 64
* The callback is only called for a non default group.
*
* An application does not need the call back at all if
- * only the stanard groups are used. In real life situations,
+ * only the standard groups are used. In real life situations,
* client and server already share well known groups,
* thus there is no need to verify them.
* Furthermore, in case that a server actually proposes a group that
{
unsigned char **out = (unsigned char **)result;
const char *in = *inptr;
- unsigned char *ret = OPENSSL_malloc(strlen(in)/2);
+ unsigned char *ret = app_malloc(strlen(in)/2, "hexdecode");
unsigned char *cp = ret;
uint8_t byte;
int nibble = 0;
return -1;
for (byte = 0; *in; ++in) {
- char c;
+ int x;
if (isspace(_UC(*in)))
continue;
- c = tolower(_UC(*in));
- if ('0' <= c && c <= '9') {
- byte |= c - '0';
- } else if ('a' <= c && c <= 'f') {
- byte |= c - 'a' + 10;
- } else {
+ x = OPENSSL_hexchar2int(*in);
+ if (x < 0) {
OPENSSL_free(ret);
return 0;
}
+ byte |= (char)x;
if ((nibble ^= 1) == 0) {
*cp++ = byte;
byte = 0;
OPT_DEBUG, OPT_TLSEXTDEBUG, OPT_STATUS, OPT_WDEBUG,
OPT_MSG, OPT_MSGFILE, OPT_ENGINE, OPT_TRACE, OPT_SECURITY_DEBUG,
OPT_SECURITY_DEBUG_VERBOSE, OPT_SHOWCERTS, OPT_NBIO_TEST, OPT_STATE,
- OPT_PSK_IDENTITY, OPT_PSK, OPT_SRPUSER, OPT_SRPPASS, OPT_SRP_STRENGTH,
- OPT_SRP_LATEUSER, OPT_SRP_MOREGROUPS, OPT_SSL3, OPT_SSL_CONFIG,
+#ifndef OPENSSL_NO_PSK
+ OPT_PSK_IDENTITY, OPT_PSK,
+#endif
+#ifndef OPENSSL_NO_SRP
+ OPT_SRPUSER, OPT_SRPPASS, OPT_SRP_STRENGTH, OPT_SRP_LATEUSER,
+ OPT_SRP_MOREGROUPS,
+#endif
+ OPT_SSL3, OPT_SSL_CONFIG,
OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1,
OPT_DTLS1_2, OPT_TIMEOUT, OPT_MTU, OPT_KEYFORM, OPT_PASS,
OPT_CERT_CHAIN, OPT_CAPATH, OPT_NOCAPATH, OPT_CHAINCAPATH, OPT_VERIFYCAPATH,
OPT_S_ENUM,
OPT_FALLBACKSCSV, OPT_NOCMDS, OPT_PROXY, OPT_DANE_TLSA_DOMAIN,
#ifndef OPENSSL_NO_CT
- OPT_NOCT, OPT_REQUESTCT, OPT_REQUIRECT, OPT_CTLOG_FILE,
+ OPT_CT, OPT_NOCT, OPT_CTLOG_FILE,
#endif
OPT_DANE_TLSA_RRDATA
} OPTION_CHOICE;
"Set TLS extension servername in ClientHello"},
{"tlsextdebug", OPT_TLSEXTDEBUG, '-',
"Hex dump of all TLS extensions received"},
+#ifndef OPENSSL_NO_OCSP
{"status", OPT_STATUS, '-', "Request certificate status from server"},
+#endif
{"serverinfo", OPT_SERVERINFO, 's',
"types Send empty ClientHello extensions (comma-separated numbers)"},
{"alpn", OPT_ALPN, 's',
{"psk", OPT_PSK, 's', "PSK in hex (without 0x)"},
#endif
#ifndef OPENSSL_NO_SRP
- {"srpuser", OPT_SRPUSER, 's', "SRP authentification for 'user'"},
+ {"srpuser", OPT_SRPUSER, 's', "SRP authentication for 'user'"},
{"srppass", OPT_SRPPASS, 's', "Password for 'user'"},
{"srp_lateuser", OPT_SRP_LATEUSER, '-',
"SRP username into second ClientHello message"},
"Specify engine to be used for client certificate operations"},
#endif
#ifndef OPENSSL_NO_CT
+ {"ct", OPT_CT, '-', "Request and parse SCTs (also enables OCSP stapling)"},
{"noct", OPT_NOCT, '-', "Do not request or parse SCTs (default)"},
- {"requestct", OPT_REQUESTCT, '-', "Request SCTs (enables OCSP stapling)"},
- {"requirect", OPT_REQUIRECT, '-', "Require at least 1 SCT (enables OCSP stapling)"},
{"ctlogfile", OPT_CTLOG_FILE, '<', "CT log list CONF file"},
#endif
- {NULL}
+ {NULL, OPT_EOF, 0x00, NULL}
};
typedef enum PROTOCOL_choice {
PROTO_IRC
} PROTOCOL_CHOICE;
-static OPT_PAIR services[] = {
+static const OPT_PAIR services[] = {
{"smtp", PROTO_SMTP},
{"pop3", PROTO_POP3},
{"imap", PROTO_IMAP},
{"xmpp-server", PROTO_XMPP_SERVER},
{"telnet", PROTO_TELNET},
{"irc", PROTO_IRC},
- {NULL}
+ {NULL, 0}
};
int s_client_main(int argc, char **argv)
char *sess_in = NULL, *sess_out = NULL, *crl_file = NULL, *p;
char *xmpphost = NULL;
const char *ehlo = "mail.example.com";
- struct sockaddr peer;
struct timeval timeout, *timeoutp;
fd_set readfds, writefds;
int noCApath = 0, noCAfile = 0;
int build_chain = 0, cbuf_len, cbuf_off, cert_format = FORMAT_PEM;
int key_format = FORMAT_PEM, crlf = 0, full_log = 1, mbuf_len = 0;
int prexit = 0;
- int enable_timeouts = 0, sdebug = 0, peerlen = sizeof peer;
+ int sdebug = 0;
int reconnect = 0, verify = SSL_VERIFY_NONE, vpmtouched = 0;
int ret = 1, in_init = 1, i, nbio_test = 0, s = -1, k, width, state = 0;
int sbuf_len, sbuf_off, cmdletters = 1;
int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending;
int read_buf_len = 0;
int fallback_scsv = 0;
- long socket_mtu = 0, randamt = 0;
+ long randamt = 0;
OPTION_CHOICE o;
+#ifndef OPENSSL_NO_DTLS
+ int enable_timeouts = 0;
+ long socket_mtu = 0;
+#endif
#ifndef OPENSSL_NO_ENGINE
ENGINE *ssl_client_engine = NULL;
#endif
ENGINE *e = NULL;
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
struct timeval tv;
#endif
char *servername = NULL;
#endif
#ifndef OPENSSL_NO_CT
char *ctlog_file = NULL;
- ct_validation_cb ct_validation = NULL;
+ int ct_validation = 0;
#endif
+ int min_version = 0, max_version = 0;
+ int async = 0;
+ unsigned int split_send_fragment = 0;
+ unsigned int max_pipelines = 0;
FD_ZERO(&readfds);
FD_ZERO(&writefds);
BIO_printf(bio_err, "Error getting client auth engine\n");
goto opthelp;
}
- break;
#endif
break;
case OPT_RAND:
goto end;
}
break;
-#else
- case OPT_PSK_IDENTITY:
- case OPT_PSK:
- break;
#endif
#ifndef OPENSSL_NO_SRP
case OPT_SRPUSER:
srp_arg.srplogin = opt_arg();
- meth = TLSv1_client_method();
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
break;
case OPT_SRPPASS:
srppass = opt_arg();
- meth = TLSv1_client_method();
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
break;
case OPT_SRP_STRENGTH:
srp_arg.strength = atoi(opt_arg());
BIO_printf(bio_err, "SRP minimal length for N is %d\n",
srp_arg.strength);
- meth = TLSv1_client_method();
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
break;
case OPT_SRP_LATEUSER:
srp_lateuser = 1;
- meth = TLSv1_client_method();
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
break;
case OPT_SRP_MOREGROUPS:
srp_arg.amp = 1;
- meth = TLSv1_client_method();
- break;
-#else
- case OPT_SRPUSER:
- case OPT_SRPPASS:
- case OPT_SRP_STRENGTH:
- case OPT_SRP_LATEUSER:
- case OPT_SRP_MOREGROUPS:
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
break;
#endif
case OPT_SSL_CONFIG:
ssl_config = opt_arg();
break;
case OPT_SSL3:
-#ifndef OPENSSL_NO_SSL3
- meth = SSLv3_client_method();
-#endif
+ min_version = SSL3_VERSION;
+ max_version = SSL3_VERSION;
break;
case OPT_TLS1_2:
-#ifndef OPENSSL_NO_TLS1_2
- meth = TLSv1_2_client_method();
-#endif
+ min_version = TLS1_2_VERSION;
+ max_version = TLS1_2_VERSION;
break;
case OPT_TLS1_1:
-#ifndef OPENSSL_NO_TLS1_1
- meth = TLSv1_1_client_method();
-#endif
+ min_version = TLS1_1_VERSION;
+ max_version = TLS1_1_VERSION;
break;
case OPT_TLS1:
-#ifndef OPENSSL_NO_TLS1
- meth = TLSv1_client_method();
-#endif
+ min_version = TLS1_VERSION;
+ max_version = TLS1_VERSION;
break;
case OPT_DTLS:
#ifndef OPENSSL_NO_DTLS
break;
case OPT_DTLS1:
#ifndef OPENSSL_NO_DTLS1
- meth = DTLSv1_client_method();
+ meth = DTLS_client_method();
+ min_version = DTLS1_VERSION;
+ max_version = DTLS1_VERSION;
socket_type = SOCK_DGRAM;
#endif
break;
case OPT_DTLS1_2:
#ifndef OPENSSL_NO_DTLS1_2
- meth = DTLSv1_2_client_method();
+ meth = DTLS_client_method();
+ min_version = DTLS1_2_VERSION;
+ max_version = DTLS1_2_VERSION;
socket_type = SOCK_DGRAM;
#endif
break;
break;
#ifndef OPENSSL_NO_CT
case OPT_NOCT:
- ct_validation = NULL;
+ ct_validation = 0;
break;
- case OPT_REQUESTCT:
- ct_validation = CT_verify_no_bad_scts;
- break;
- case OPT_REQUIRECT:
- ct_validation = CT_verify_at_least_one_good_sct;
+ case OPT_CT:
+ ct_validation = 1;
break;
case OPT_CTLOG_FILE:
ctlog_file = opt_arg();
}
break;
case OPT_NEXTPROTONEG:
+#ifndef OPENSSL_NO_NEXTPROTONEG
next_proto_neg_in = opt_arg();
+#endif
break;
case OPT_ALPN:
alpn_in = opt_arg();
case OPT_STARTTLS:
if (!opt_pair(opt_arg(), services, &starttls_proto))
goto end;
+ break;
case OPT_SERVERNAME:
servername = opt_arg();
break;
}
}
+ if (SSL_CTX_set_min_proto_version(ctx, min_version) == 0)
+ goto end;
+ if (SSL_CTX_set_max_proto_version(ctx, max_version) == 0)
+ goto end;
+
if (vpmtouched && !SSL_CTX_set1_param(ctx, vpm)) {
BIO_printf(bio_err, "Error setting verify params\n");
ERR_print_errors(bio_err);
SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback);
#ifndef OPENSSL_NO_CT
- if (!SSL_CTX_set_ct_validation_callback(ctx, ct_validation, NULL)) {
+ /* Enable SCT processing, without early connection termination */
+ if (ct_validation &&
+ !SSL_CTX_enable_ct(ctx, SSL_CT_VALIDATION_PERMISSIVE)) {
ERR_print_errors(bio_err);
goto end;
}
if (!ctx_set_ctlog_list_file(ctx, ctlog_file)) {
- ERR_print_errors(bio_err);
- goto end;
+ if (ct_validation) {
+ ERR_print_errors(bio_err);
+ goto end;
+ }
+
+ /*
+ * If CT validation is not enabled, the log list isn't needed so don't
+ * show errors or abort. We try to load it regardless because then we
+ * can show the names of the logs any SCTs came from (SCTs may be seen
+ * even with validation disabled).
+ */
+ ERR_clear_error();
}
#endif
goto end;
}
} else if (dane_tlsa_rrset != NULL) {
- BIO_printf(bio_err, "%s: DANE TLSA authentication requires the "
- "-dane_tlsa_domain option.\n", prog);
- goto end;
+ BIO_printf(bio_err, "%s: DANE TLSA authentication requires the "
+ "-dane_tlsa_domain option.\n", prog);
+ goto end;
}
re_start:
}
BIO_printf(bio_c_out, "Turned on non blocking io\n");
}
+#ifndef OPENSSL_NO_DTLS
if (socket_type == SOCK_DGRAM) {
+ struct sockaddr peer;
+ int peerlen = sizeof peer;
sbio = BIO_new_dgram(s, BIO_NOCLOSE);
if (getsockname(s, &peer, (void *)&peerlen) < 0) {
/* want to do MTU discovery */
BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
} else
+#endif /* OPENSSL_NO_DTLS */
sbio = BIO_new_socket(s, BIO_NOCLOSE);
if (nbio_test) {
SSL_set_tlsext_debug_callback(con, tlsext_cb);
SSL_set_tlsext_debug_arg(con, bio_c_out);
}
+#ifndef OPENSSL_NO_OCSP
if (c_status_req) {
SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
}
+#endif
SSL_set_bio(con, sbio, sbio);
SSL_set_connect_state(con);
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
- BIO_printf(fbio, "CONNECT %s\r\n\r\n", connectstr);
+ BIO_printf(fbio, "CONNECT %s HTTP/1.0\r\n\r\n", connectstr);
(void)BIO_flush(fbio);
/* wait for multi-line response to end CONNECT response */
do {
ssl_pending = read_ssl && SSL_has_pending(con);
if (!ssl_pending) {
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
if (tty_on) {
if (read_tty)
openssl_fdset(fileno(stdin), &readfds);
tv.tv_usec = 0;
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, &tv);
-# if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
- if (!i && (!_kbhit() || !read_tty))
- continue;
-# else
- if (!i && (!((_kbhit())
- || (WAIT_OBJECT_0 ==
- WaitForSingleObject(GetStdHandle
- (STD_INPUT_HANDLE),
- 0)))
- || !read_tty))
+ if (!i && (!has_stdin_waiting() || !read_tty))
continue;
-# endif
- } else
- i = select(width, (void *)&readfds, (void *)&writefds,
- NULL, timeoutp);
- }
-#elif defined(OPENSSL_SYS_NETWARE)
- if (!write_tty) {
- if (read_tty) {
- tv.tv_sec = 1;
- tv.tv_usec = 0;
- i = select(width, (void *)&readfds, (void *)&writefds,
- NULL, &tv);
} else
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, timeoutp);
write_ssl = 0;
}
break;
+ case SSL_ERROR_WANT_ASYNC_JOB:
+ /* This shouldn't ever happen in s_client - treat as an error */
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
}
}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
/* Assume Windows/DOS/BeOS can always write */
else if (!ssl_pending && write_tty)
#else
BIO_printf(bio_c_out, "closed\n");
ret = 0;
goto shut;
+ case SSL_ERROR_WANT_ASYNC_JOB:
+ /* This shouldn't ever happen in s_client. Treat as an error */
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
/* break; */
}
}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-# if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
- else if (_kbhit())
-# else
- else if ((_kbhit())
- || (WAIT_OBJECT_0 ==
- WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
-# endif
-#elif defined (OPENSSL_SYS_NETWARE)
- else if (_kbhit())
+/* OPENSSL_SYS_MSDOS includes OPENSSL_SYS_WINDOWS */
+#if defined(OPENSSL_SYS_MSDOS)
+ else if (has_stdin_waiting())
#else
else if (FD_ISSET(fileno(stdin), &readfds))
#endif
if (in_init)
print_stuff(bio_c_out, con, full_log);
do_ssl_shutdown(con);
+#if defined(OPENSSL_SYS_WINDOWS)
+ /*
+ * Give the socket time to send its last data before we close it.
+ * No amount of setting SO_LINGER etc on the socket seems to persuade
+ * Windows to send the data before closing the socket...but sleeping
+ * for a short time seems to do it (units in ms)
+ * TODO: Find a better way to do this
+ */
+ Sleep(50);
+#endif
BIO_closesocket(SSL_get_fd(con));
end:
if (con != NULL) {
#endif
unsigned char *exportedkeymat;
#ifndef OPENSSL_NO_CT
- const STACK_OF(SCT) *scts;
+ const SSL_CTX *ctx = SSL_get_SSL_CTX(s);
#endif
if (full) {
ssl_print_tmp_key(bio, s);
#ifndef OPENSSL_NO_CT
- scts = SSL_get0_peer_scts(s);
- BIO_printf(bio, "---\nSCTs present (%i)\n---\n",
- scts ? sk_SCT_num(scts) : 0);
- SCT_LIST_print(scts, bio, 0, "\n---\n");
- BIO_printf(bio, "\n");
- if (SSL_get_ct_validation_callback(s) == NULL) {
- BIO_printf(bio, "---\nWarning: CT validation is disabled, so not all "
- "SCTs may be displayed. Re-run with \"-requestct\".\n");
+ /*
+ * When the SSL session is anonymous, or resumed via an abbreviated
+ * handshake, no SCTs are provided as part of the handshake. While in
+ * a resumed session SCTs may be present in the session's certificate,
+ * no callbacks are invoked to revalidate these, and in any case that
+ * set of SCTs may be incomplete. Thus it makes little sense to
+ * attempt to display SCTs from a resumed session's certificate, and of
+ * course none are associated with an anonymous peer.
+ */
+ if (peer != NULL && !SSL_session_reused(s) && SSL_ct_is_enabled(s)) {
+ const STACK_OF(SCT) *scts = SSL_get0_peer_scts(s);
+ int sct_count = scts != NULL ? sk_SCT_num(scts) : 0;
+
+ BIO_printf(bio, "---\nSCTs present (%i)\n", sct_count);
+ if (sct_count > 0) {
+ const CTLOG_STORE *log_store = SSL_CTX_get0_ctlog_store(ctx);
+
+ BIO_printf(bio, "---\n");
+ for (i = 0; i < sct_count; ++i) {
+ SCT *sct = sk_SCT_value(scts, i);
+
+ BIO_printf(bio, "SCT validation status: %s\n",
+ SCT_validation_status_string(sct));
+ SCT_print(sct, bio, 0, log_store);
+ if (i < sct_count - 1)
+ BIO_printf(bio, "\n---\n");
+ }
+ BIO_printf(bio, "\n");
+ }
}
#endif
SSL_CIPHER_get_version(c), SSL_CIPHER_get_name(c));
if (peer != NULL) {
EVP_PKEY *pktmp;
+
pktmp = X509_get0_pubkey(peer);
BIO_printf(bio, "Server public key is %d bit\n",
EVP_PKEY_bits(pktmp));
(void)BIO_flush(bio);
}
+# ifndef OPENSSL_NO_OCSP
static int ocsp_resp_cb(SSL *s, void *arg)
{
const unsigned char *p;
OCSP_RESPONSE_free(rsp);
return 1;
}
+# endif
+
+#endif
projects / openssl.git / blobdiff