# CPUID module collects small commonly used assembler snippets
CPUID_OBJ=
BN_ASM= bn_asm.o
+EC_ASM=
DES_ENC= des_enc.o fcrypt_b.o
AES_ENC= aes_core.o aes_cbc.o
BF_ENC= bf_enc.o
RMD160_ASM_OBJ=
WP_ASM_OBJ=
CMLL_ENC=
+MODES_ASM_OBJ=
+ENGINES_ASM_OBJ=
PERLASM_SCHEME=
# KRB5 stuff
ZLIB_INCLUDE=
LIBZLIB=
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build may be different so hard
+# code the path.
+
+FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto. If not compiling in FIPS mode
+# at all this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
DIRS= crypto ssl engines apps test tools
ENGDIRS= ccgost
SHLIBDIRS= crypto ssl
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- cms pqueue ts jpake store
+ cms pqueue ts jpake srp store cmac
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
$${EXHEADER+EXHEADER} $${HEADER+HEADER} \
$${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
- $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} \
+ $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
- CPUID_OBJ='$(CPUID_OBJ)' \
- BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \
+ CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)' \
+ EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' \
AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
+ MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
+ ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
+ FIPSLIBDIR='${FIPSLIBDIR}' \
+ FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
+ FIPS_EX_OBJ='${FIPS_EX_OBJ}' \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
+ ../crypto/aes/aes_ecb.o \
+ ../crypto/aes/aes_ofb.o \
+ ../crypto/bn/bn_add.o \
+ ../crypto/bn/bn_blind.o \
+ ../crypto/bn/bn_ctx.o \
+ ../crypto/bn/bn_div.o \
+ ../crypto/bn/bn_exp2.o \
+ ../crypto/bn/bn_exp.o \
+ ../crypto/bn/bn_gcd.o \
+ ../crypto/bn/bn_gf2m.o \
+ ../crypto/bn/bn_lib.o \
+ ../crypto/bn/bn_mod.o \
+ ../crypto/bn/bn_mont.o \
+ ../crypto/bn/bn_mul.o \
+ ../crypto/bn/bn_nist.o \
+ ../crypto/bn/bn_prime.o \
+ ../crypto/bn/bn_rand.o \
+ ../crypto/bn/bn_recp.o \
+ ../crypto/bn/bn_shift.o \
+ ../crypto/bn/bn_sqr.o \
+ ../crypto/bn/bn_word.o \
+ ../crypto/bn/bn_x931p.o \
+ ../crypto/buffer/buf_str.o \
+ ../crypto/cmac/cmac.o \
+ ../crypto/cryptlib.o \
+ ../crypto/des/cfb64ede.o \
+ ../crypto/des/cfb64enc.o \
+ ../crypto/des/cfb_enc.o \
+ ../crypto/des/ecb3_enc.o \
+ ../crypto/des/ofb64ede.o \
+ ../crypto/des/fcrypt.o \
+ ../crypto/des/set_key.o \
+ ../crypto/dh/dh_check.o \
+ ../crypto/dh/dh_gen.o \
+ ../crypto/dh/dh_key.o \
+ ../crypto/dsa/dsa_gen.o \
+ ../crypto/dsa/dsa_key.o \
+ ../crypto/dsa/dsa_ossl.o \
+ ../crypto/ec/ec_curve.o \
+ ../crypto/ec/ec_cvt.o \
+ ../crypto/ec/ec_key.o \
+ ../crypto/ec/ec_lib.o \
+ ../crypto/ec/ecp_mont.o \
+ ../crypto/ec/ec_mult.o \
+ ../crypto/ec/ecp_nist.o \
+ ../crypto/ec/ecp_smpl.o \
+ ../crypto/ec/ec2_mult.o \
+ ../crypto/ec/ec2_smpl.o \
+ ../crypto/ecdh/ech_key.o \
+ ../crypto/ecdh/ech_ossl.o \
+ ../crypto/ecdsa/ecs_ossl.o \
+ ../crypto/evp/e_aes.o \
+ ../crypto/evp/e_des3.o \
+ ../crypto/evp/e_null.o \
+ ../crypto/evp/m_sha1.o \
+ ../crypto/evp/m_dss1.o \
+ ../crypto/evp/m_dss.o \
+ ../crypto/evp/m_ecdsa.o \
+ ../crypto/hmac/hmac.o \
+ ../crypto/modes/cbc128.o \
+ ../crypto/modes/ccm128.o \
+ ../crypto/modes/cfb128.o \
+ ../crypto/modes/ctr128.o \
+ ../crypto/modes/gcm128.o \
+ ../crypto/modes/ofb128.o \
+ ../crypto/modes/xts128.o \
+ ../crypto/rsa/rsa_eay.o \
+ ../crypto/rsa/rsa_gen.o \
+ ../crypto/rsa/rsa_crpt.o \
+ ../crypto/rsa/rsa_none.o \
+ ../crypto/rsa/rsa_oaep.o \
+ ../crypto/rsa/rsa_pk1.o \
+ ../crypto/rsa/rsa_pss.o \
+ ../crypto/rsa/rsa_ssl.o \
+ ../crypto/rsa/rsa_x931.o \
+ ../crypto/rsa/rsa_x931g.o \
+ ../crypto/sha/sha1dgst.o \
+ ../crypto/sha/sha256.o \
+ ../crypto/sha/sha512.o \
+ ../crypto/thr_id.o \
+ ../crypto/uid.o
+
sub_all: build_all
+
build_all: build_libs build_apps build_tests build_tools
build_libs: build_crypto build_ssl build_engines
build_crypto:
@dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_ssl:
+build_ssl: build_crypto
@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines:
- @dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps:
+build_engines: build_crypto
+ @dir=engines; target=all; AS='$(CC) -c'; export AS; $(BUILD_ONE_CMD)
+
+build_apps: build_libs
@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests:
+build_tests: build_libs
@dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools:
+build_tools: build_libs
@dir=tools; target=all; $(BUILD_ONE_CMD)
all_testapps: build_libs build_testapps
libcrypto$(SHLIB_EXT): libcrypto.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
- $(MAKE) SHLIBDIRS=crypto build-shared; \
+ if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+ FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
+ export CC FIPSLD_CC; \
+ fi; \
+ $(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
done; \
fi; \
( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
- if [ "$(PLATFORM)" = "Cygwin" ]; then \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
fi; \
done
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+ echo 'Libs: -L$${libdir} -lcrypto'; \
+ echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
libssl.pc: Makefile
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
- echo 'Name: OpenSSL'; \
+ echo 'Name: OpenSSL-libssl'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+ echo 'Requires.private: libcrypto'; \
+ echo 'Libs: -L$${libdir} -lssl'; \
+ echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
openssl.pc: Makefile
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+ echo 'Requires: libssl libcrypto' ) > openssl.pc
Makefile: Makefile.org Configure config
@echo "Makefile is older than Makefile.org, Configure or config."
@false
libclean:
- rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+ rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
clean: libclean
rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+ rm -rf *.bak certs/.0
@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
- rm -f $(LIBS)
+ rm -f $(LIBS) tags TAGS
rm -f openssl.pc libssl.pc libcrypto.pc
rm -f speed.* .pure
rm -f $(TARFILE)
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
dclean:
- rm -rf *.bak include/openssl certs/.0
@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
rehash: rehash.time
[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
OPENSSL_DEBUG_MEMORY=on; \
export OPENSSL OPENSSL_DEBUG_MEMORY; \
- $(PERL) tools/c_rehash certs) && \
+ $(PERL) tools/c_rehash certs/demo) && \
touch rehash.time; \
else :; fi
lint:
@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
-tags:
- rm -f TAGS
- find . -name '[^.]*.[ch]' | xargs etags -a
+tags TAGS: FORCE
+ rm -f TAGS tags
+ -ctags -R .
+ -etags -R .
+
+FORCE:
errors:
+ $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
- $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
stacks:
$(PERL) util/mkstack.pl -write
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
done;
@set -e; target=install; $(RECURSIVE_BUILD_CMD)
- @set -e; for i in $(LIBS) ;\
+ @set -e; liblist="$(LIBS)"; for i in $$liblist ;\
do \
if [ -f "$$i" ]; then \
( echo installing $$i; \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
- if [ "$(PLATFORM)" != "Cygwin" ]; then \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- else \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ else \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+ chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
fi ); \
if expr $(PLATFORM) : 'mingw' > /dev/null; then \
( case $$i in \
install_html_docs:
here="`pwd`"; \
+ filecase=; \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+ filecase=-i; \
+ esac; \
for subdir in apps crypto ssl; do \
mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
for i in doc/$$subdir/*.pod; do \
echo "installing html/$$fn.$(HTMLSUFFIX)"; \
cat $$i \
| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
- | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+ | pod2html --podroot=doc --htmlroot=.. --podpath=$$subdir:apps:crypto:ssl \
| sed -r 's/<!DOCTYPE.*//g' \
> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
$(INSTALL_PREFIX)$(MANDIR)/man3 \
$(INSTALL_PREFIX)$(MANDIR)/man5 \
$(INSTALL_PREFIX)$(MANDIR)/man7
- @pod2man="`cd util; ./pod2mantest $(PERL)`"; \
here="`pwd`"; \
filecase=; \
- if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
- fi; \
+ esac; \
set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
+ pod2man \
--section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
+ --release=$(VERSION) `basename $$i`) \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
+ pod2man \
--section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
+ --release=$(VERSION) `basename $$i`) \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
projects / openssl.git / blobdiff