# CPUID module collects small commonly used assembler snippets
CPUID_OBJ=
BN_ASM= bn_asm.o
+EC_ASM=
DES_ENC= des_enc.o fcrypt_b.o
AES_ENC= aes_core.o aes_cbc.o
BF_ENC= bf_enc.o
RMD160_ASM_OBJ=
WP_ASM_OBJ=
CMLL_ENC=
+MODES_ASM_OBJ=
+ENGINES_ASM_OBJ=
PERLASM_SCHEME=
# KRB5 stuff
ZLIB_INCLUDE=
LIBZLIB=
+# TOP level FIPS install directory.
+FIPSDIR=
+
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build may be different so hard
+# code the path.
+
+FIPSLIBDIR=
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
DIRS= crypto ssl engines apps test tools
ENGDIRS= ccgost
SHLIBDIRS= crypto ssl
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- cms pqueue ts jpake store
+ cms pqueue ts jpake srp store cmac
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
$${EXHEADER+EXHEADER} $${HEADER+HEADER} \
$${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
- $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} \
+ $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
- CPUID_OBJ='$(CPUID_OBJ)' \
- BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \
+ CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)' \
+ EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' \
AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
+ MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
+ ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
+ FIPSLIBDIR='${FIPSLIBDIR}' \
+ FIPSDIR='${FIPSDIR}' \
+ FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
build_testapps:
@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-libcrypto$(SHLIB_EXT): libcrypto.a
+fips_premain_dso$(EXE_EXT): libcrypto.a
+ [ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
+ -DFINGERPRINT_PREMAIN_DSO_LOAD -o $@ \
+ $(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
+ libcrypto.a $(EX_LIBS)
+
+libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
@if [ "$(SHLIB_TARGET)" != "" ]; then \
- $(MAKE) SHLIBDIRS=crypto build-shared; \
+ if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+ FIPSLD_LIBCRYPTO=libcrypto.a ; \
+ FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
+ export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
+ fi; \
+ $(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared && \
+ (touch -c fips_premain_dso$(EXE_EXT) || :); \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
done; \
fi; \
( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
- if [ "$(PLATFORM)" = "Cygwin" ]; then \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
fi; \
done
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+ echo 'Libs: -L$${libdir} -lcrypto'; \
+ echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
libssl.pc: Makefile
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
- echo 'Name: OpenSSL'; \
+ echo 'Name: OpenSSL-libssl'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+ echo 'Requires.private: libcrypto'; \
+ echo 'Libs: -L$${libdir} -lssl'; \
+ echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
openssl.pc: Makefile
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+ echo 'Requires: libssl libcrypto' ) > openssl.pc
Makefile: Makefile.org Configure config
@echo "Makefile is older than Makefile.org, Configure or config."
@false
libclean:
- rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+ rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
clean: libclean
rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
OPENSSL_DEBUG_MEMORY=on; \
export OPENSSL OPENSSL_DEBUG_MEMORY; \
- $(PERL) tools/c_rehash certs) && \
+ $(PERL) tools/c_rehash certs/demo) && \
touch rehash.time; \
else :; fi
find . -name '[^.]*.[ch]' | xargs etags -a
errors:
+ $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
- $(PERL) util/ck_errf.pl */*.c */*/*.c
stacks:
$(PERL) util/mkstack.pl -write
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
done;
@set -e; target=install; $(RECURSIVE_BUILD_CMD)
- @set -e; for i in $(LIBS) ;\
+ @set -e; liblist="$(LIBS)"; for i in $$liblist ;\
do \
if [ -f "$$i" ]; then \
( echo installing $$i; \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
- if [ "$(PLATFORM)" != "Cygwin" ]; then \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- else \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ else \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+ chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
fi ); \
if expr $(PLATFORM) : 'mingw' > /dev/null; then \
( case $$i in \
fi; \
done; \
( here="`pwd`"; \
- cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+ cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
if [ "$(INSTALLTOP)" != "/usr" ]; then \
echo 'OpenSSL shared libraries have been installed in:'; \
install_html_docs:
here="`pwd`"; \
+ filecase=; \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+ filecase=-i; \
+ esac; \
for subdir in apps crypto ssl; do \
mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
for i in doc/$$subdir/*.pod; do \
$(INSTALL_PREFIX)$(MANDIR)/man3 \
$(INSTALL_PREFIX)$(MANDIR)/man5 \
$(INSTALL_PREFIX)$(MANDIR)/man7
- @pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+ @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
here="`pwd`"; \
filecase=; \
- if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
- fi; \
+ esac; \
set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
projects / openssl.git / blobdiff