Updated error codes for FIPS library.

[openssl.git] / Makefile.org

diff --git a/Makefile.org b/Makefile.org
index 4160f590a85e11d0fee330f99bc5f31bc817309c..551530c9245794eee773a506106aa723a1a421cc 100644 (file)
--- a/Makefile.org
+++ b/Makefile.org
@@ -78,7 +78,7 @@ LIBDIR=lib
 # dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
 # gcc, then the driver will automatically translate it to -xarch=v8plus
 # and pass it down to assembler.
-AS=$(CC) -c
+#AS=$(CC) -c
 ASFLAG=$(CFLAG)
 
 # For x86 assembler: Set PROCESSOR to 386 if you want to support
@@ -114,7 +114,7 @@ LIBZLIB=
 # The FIPS module build will place it $(INSTALLTOP)/lib
 # but since $(INSTALLTOP) can only take the default value
 # when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build make be different so hard
+# $(INSTALLTOP) for this build may be different so hard
 # code the path.
 
 FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
@@ -148,7 +148,7 @@ SDIRS=  \
        bn ec rsa dsa ecdsa dh ecdh dso engine \
        buffer bio stack lhash rand err \
        evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-       cms pqueue ts jpake store cmac
+       cms pqueue ts jpake srp store cmac
 # keep in mind that the above list is adjusted by ./Configure
 # according to no-xxx arguments...
 
@@ -205,7 +205,7 @@ CLEARENV=   TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}     \
 
 BUILDENV=      PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
                CC='$(CC)' CFLAG='$(CFLAG)'                     \
-               AS='$(CC)' ASFLAG='$(CFLAG) -c'                 \
+               ASFLAG='$(CFLAG) -c'                    \
                AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'        \
                CROSS_COMPILE='$(CROSS_COMPILE)'        \
                PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'             \
@@ -281,10 +281,12 @@ FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
        ../crypto/bn/bn_exp2.o \
        ../crypto/bn/bn_exp.o \
        ../crypto/bn/bn_gcd.o \
+       ../crypto/bn/bn_gf2m.o \
        ../crypto/bn/bn_lib.o \
        ../crypto/bn/bn_mod.o \
        ../crypto/bn/bn_mont.o \
        ../crypto/bn/bn_mul.o \
+       ../crypto/bn/bn_nist.o \
        ../crypto/bn/bn_prime.o \
        ../crypto/bn/bn_rand.o \
        ../crypto/bn/bn_recp.o \
@@ -293,6 +295,7 @@ FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
        ../crypto/bn/bn_word.o \
        ../crypto/bn/bn_x931p.o \
        ../crypto/buffer/buf_str.o \
+       ../crypto/cmac/cmac.o \
        ../crypto/cryptlib.o \
        ../crypto/des/cfb64ede.o \
        ../crypto/des/cfb64enc.o \
@@ -307,15 +310,27 @@ FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
        ../crypto/dsa/dsa_gen.o \
        ../crypto/dsa/dsa_key.o \
        ../crypto/dsa/dsa_ossl.o \
-       ../crypto/dsa/dsa_sign.o \
-       ../crypto/dsa/dsa_vrf.o \
+       ../crypto/ec/ec_curve.o \
+       ../crypto/ec/ec_cvt.o \
+       ../crypto/ec/ec_key.o \
+       ../crypto/ec/ec_lib.o \
+       ../crypto/ec/ecp_mont.o \
+       ../crypto/ec/ec_mult.o \
+       ../crypto/ec/ecp_nist.o \
+       ../crypto/ec/ecp_smpl.o \
+       ../crypto/ec/ec2_mult.o \
+       ../crypto/ec/ec2_smpl.o \
+       ../crypto/ecdh/ech_key.o \
+       ../crypto/ecdh/ech_ossl.o \
+       ../crypto/ecdsa/ecs_ossl.o \
        ../crypto/evp/e_aes.o \
        ../crypto/evp/e_des3.o \
        ../crypto/evp/m_sha1.o \
        ../crypto/hmac/hmac.o \
-       ../crypto/mem.o \
+       ../crypto/modes/cbc128.o \
        ../crypto/modes/cfb128.o \
        ../crypto/modes/ctr128.o \
+       ../crypto/modes/gcm128.o \
        ../crypto/modes/ofb128.o \
        ../crypto/rand/md_rand.o \
        ../crypto/rand/rand_egd.o \
@@ -333,6 +348,7 @@ FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
        ../crypto/rsa/rsa_pss.o \
        ../crypto/rsa/rsa_ssl.o \
        ../crypto/rsa/rsa_x931.o \
+       ../crypto/rsa/rsa_x931g.o \
        ../crypto/sha/sha1dgst.o \
        ../crypto/sha/sha256.o \
        ../crypto/sha/sha512.o \
@@ -349,11 +365,16 @@ build_fips:
 
 build_crypto:
        if [ -n "$(FIPSCANLIB)" ]; then \
-               EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
+               EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(MODES_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
                ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
        else \
                ARX='${AR}' ; \
        fi ; export ARX ; \
+       if [ $(FIPSCANISTERINTERNAL) = "y" ]; then \
+               AS='$(PERL) $${TOP}/util/fipsas.pl $${TOP} $${<} $(CC) -c' ; \
+       else \
+               AS='$(CC) -c' ; \
+       fi ; export AS ; \
                dir=crypto; target=all; $(BUILD_ONE_CMD)
 build_ssl:
        @dir=ssl; target=all; $(BUILD_ONE_CMD)
@@ -370,9 +391,13 @@ all_testapps: build_libs build_testapps
 build_testapps:
        @dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 
-libcrypto$(SHLIB_EXT): libcrypto.a
+libcrypto$(SHLIB_EXT): libcrypto.a build_fips
        @if [ "$(SHLIB_TARGET)" != "" ]; then \
-               $(MAKE) SHLIBDIRS=crypto build-shared; \
+               if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+                       FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
+                       export CC FIPSLD_CC; \
+               fi; \
+               $(MAKE) -e SHLIBDIRS=crypto build-shared; \
        else \
                echo "There's no support for shared libraries on this platform" >&2; \
                exit 1; \
@@ -495,6 +520,9 @@ links:
        @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
        @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
        @set -e; target=links; $(RECURSIVE_BUILD_CMD)
+       @if [ -z "$(FIPSCANLIB)" ]; then \
+               set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
+       fi
 
 gentests:
        @(cd test && echo "generating dummy tests (if needed)..." && \