INSTALL_PREFIX=
INSTALLTOP=/usr/local/ssl
-# Do not edit this manually. Use Configure --openssldir=DIR do change this!
+# Do not edit this manually. Use Configure --openssldir=DIR to change this!
OPENSSLDIR=/usr/local/ssl
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# NO_RC2 - Define to build without the RC2 algorithm
# THREADS - Define when building with threads, you will probably also need any
-# system defines as well, i.e. _REENTERANT for Solaris 2.[34]
+# system defines as well, i.e. _REENTRANT for Solaris 2.[34]
# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing.
# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
RANLIB= ranlib
NM= nm
PERL= perl
+#RM= echo --
+RM= rm -f
TAR= tar
TARFLAGS= --no-recursion
MAKEDEPPROG=makedepend
# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
# gcc, then the driver will automatically translate it to -xarch=v8plus
# and pass it down to assembler.
-#AS=$(CC) -c
+AS=$(CC) -c
ASFLAG=$(CFLAG)
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# CPUID module collects small commonly used assembler snippets
CPUID_OBJ=
BN_ASM= bn_asm.o
+EC_ASM=
DES_ENC= des_enc.o fcrypt_b.o
AES_ENC= aes_core.o aes_cbc.o
BF_ENC= bf_enc.o
ENGINES_ASM_OBJ=
PERLASM_SCHEME=
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
-
# Zlib stuff
ZLIB_INCLUDE=
LIBZLIB=
FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
-# This is set to "y" if fipscanister.o is compiled internally as
-# opposed to coming from an external validated location.
-
-FIPSCANISTERINTERNAL=n
-
# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
+# normally it will be libcrypto. If not compiling in FIPS mode
+# at all this is empty making it a useful test for a FIPS compile.
FIPSCANLIB=
BASEADDR=
-DIRS= crypto fips ssl engines apps test tools
+DIRS= crypto ssl engines apps test tools
ENGDIRS= ccgost
SHLIBDIRS= crypto ssl
+INSTALL_SUBS= engines apps tools
# dirs in crypto to build
SDIRS= \
des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
- evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- cms pqueue ts jpake srp store cmac
+ evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui \
+ cms pqueue ts jpake srp store cmac ct async
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
SHELL=/bin/sh
TOP= .
-ONEDIRS=out tmp
-EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS
-WDIRS= windows
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
NAME= $(BASENAME)-$(VERSION)
TARFILE= $(NAME).tar
WTARFILE= $(NAME)-win.tar
-EXHEADER= e_os2.h
HEADER= e_os.h
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+# Directories created on install if they don't exist.
+INSTALLDIRS= \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
+ $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
+ $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
+ $(INSTALL_PREFIX)$(OPENSSLDIR)/private
+
+all: Makefile build_all
# as we stick to -e, CLEARENV ensures that local variables in lower
# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
- $${EXHEADER+EXHEADER} $${HEADER+HEADER} \
+ $${HEADER+HEADER} \
$${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
- $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} \
+ $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+# LC_ALL=C ensures that error [and other] messages are delivered in
+# same language for uniform treatment.
+BUILDENV= LC_ALL=C PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)'\
CC='$(CC)' CFLAG='$(CFLAG)' \
- ASFLAG='$(CFLAG) -c' \
+ AS='$(CC)' ASFLAG='$(CFLAG) -c' \
AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
CROSS_COMPILE='$(CROSS_COMPILE)' \
PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \
INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
LIBDIR='$(LIBDIR)' \
MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
- DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \
+ DEPFLAG='$(DEPFLAG)' \
MAKEDEPPROG='$(MAKEDEPPROG)' \
SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
- KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \
ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
- CPUID_OBJ='$(CPUID_OBJ)' \
- BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \
+ CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)' \
+ EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' \
AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
FIPSLIBDIR='${FIPSLIBDIR}' \
FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
- FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}' \
- FIPS_EX_OBJ='${FIPS_EX_OBJ}' \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
# BUILD_ONE_CMD instead.
#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS). It requires
-# exactly the same shell variables as BUILD_CMD.
-#
# RECURSIVE_BUILD_CMD is a macro to build a given target in all
# subdirectories defined in $(DIRS). It requires that the target
# is given through the shell variable `target'.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS). It requires
+# exactly the same shell variables as BUILD_CMD.
BUILD_CMD= if [ -d "$$dir" ]; then \
( cd $$dir && echo "making $$target in $$dir..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
- ../crypto/aes/aes_ecb.o \
- ../crypto/aes/aes_ofb.o \
- ../crypto/bn/bn_add.o \
- ../crypto/bn/bn_blind.o \
- ../crypto/bn/bn_ctx.o \
- ../crypto/bn/bn_div.o \
- ../crypto/bn/bn_exp2.o \
- ../crypto/bn/bn_exp.o \
- ../crypto/bn/bn_gcd.o \
- ../crypto/bn/bn_gf2m.o \
- ../crypto/bn/bn_lib.o \
- ../crypto/bn/bn_mod.o \
- ../crypto/bn/bn_mont.o \
- ../crypto/bn/bn_mul.o \
- ../crypto/bn/bn_nist.o \
- ../crypto/bn/bn_prime.o \
- ../crypto/bn/bn_rand.o \
- ../crypto/bn/bn_recp.o \
- ../crypto/bn/bn_shift.o \
- ../crypto/bn/bn_sqr.o \
- ../crypto/bn/bn_word.o \
- ../crypto/bn/bn_x931p.o \
- ../crypto/buffer/buf_str.o \
- ../crypto/cmac/cmac.o \
- ../crypto/cryptlib.o \
- ../crypto/des/cfb64ede.o \
- ../crypto/des/cfb64enc.o \
- ../crypto/des/cfb_enc.o \
- ../crypto/des/ecb3_enc.o \
- ../crypto/des/ofb64ede.o \
- ../crypto/des/fcrypt.o \
- ../crypto/des/set_key.o \
- ../crypto/dh/dh_check.o \
- ../crypto/dh/dh_gen.o \
- ../crypto/dh/dh_key.o \
- ../crypto/dsa/dsa_gen.o \
- ../crypto/dsa/dsa_key.o \
- ../crypto/dsa/dsa_ossl.o \
- ../crypto/ec/ec_curve.o \
- ../crypto/ec/ec_cvt.o \
- ../crypto/ec/ec_key.o \
- ../crypto/ec/ec_lib.o \
- ../crypto/ec/ecp_mont.o \
- ../crypto/ec/ec_mult.o \
- ../crypto/ec/ecp_nist.o \
- ../crypto/ec/ecp_smpl.o \
- ../crypto/ec/ec2_mult.o \
- ../crypto/ec/ec2_smpl.o \
- ../crypto/ecdh/ech_key.o \
- ../crypto/ecdh/ech_ossl.o \
- ../crypto/ecdsa/ecs_ossl.o \
- ../crypto/evp/e_aes.o \
- ../crypto/evp/e_des3.o \
- ../crypto/evp/e_null.o \
- ../crypto/evp/m_sha1.o \
- ../crypto/evp/m_dss1.o \
- ../crypto/evp/m_dss.o \
- ../crypto/evp/m_ecdsa.o \
- ../crypto/hmac/hmac.o \
- ../crypto/modes/cbc128.o \
- ../crypto/modes/ccm128.o \
- ../crypto/modes/cfb128.o \
- ../crypto/modes/ctr128.o \
- ../crypto/modes/gcm128.o \
- ../crypto/modes/ofb128.o \
- ../crypto/modes/xts128.o \
- ../crypto/rsa/rsa_eay.o \
- ../crypto/rsa/rsa_gen.o \
- ../crypto/rsa/rsa_crpt.o \
- ../crypto/rsa/rsa_none.o \
- ../crypto/rsa/rsa_oaep.o \
- ../crypto/rsa/rsa_pk1.o \
- ../crypto/rsa/rsa_pss.o \
- ../crypto/rsa/rsa_ssl.o \
- ../crypto/rsa/rsa_x931.o \
- ../crypto/rsa/rsa_x931g.o \
- ../crypto/sha/sha1dgst.o \
- ../crypto/sha/sha256.o \
- ../crypto/sha/sha512.o \
- ../crypto/thr_id.o \
- ../crypto/uid.o
-
sub_all: build_all
+
build_all: build_libs build_apps build_tests build_tools
-build_libs: build_crypto build_fips build_ssl build_engines
+build_libs: build_libcrypto build_libssl openssl.pc
-build_fips:
- @dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
+build_libcrypto: build_crypto build_engines libcrypto.pc
+build_libssl: build_ssl libssl.pc
build_crypto:
- if [ -n "$(FIPSCANLIB)" ]; then \
- EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(MODES_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
- ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
- else \
- ARX='${AR}' ; \
- fi ; export ARX ; \
- if [ $(FIPSCANISTERINTERNAL) = "y" ]; then \
- AS='$(PERL) $${TOP}/util/fipsas.pl $${TOP} $${<} $(CC) -c' ; \
- else \
- AS='$(CC) -c' ; \
- fi ; export AS ; \
- dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_ssl:
+ @dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl: build_crypto
@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines:
+build_engines: build_crypto
@dir=engines; target=all; AS='$(CC) -c'; export AS; $(BUILD_ONE_CMD)
-build_apps:
+
+build_apps: build_libs
@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests:
+build_tests: build_libs
@dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools:
+build_tools: build_libs
@dir=tools; target=all; $(BUILD_ONE_CMD)
all_testapps: build_libs build_testapps
build_testapps:
@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-libcrypto$(SHLIB_EXT): libcrypto.a build_fips
+libcrypto$(SHLIB_EXT): libcrypto.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
export CC FIPSLD_CC; \
fi; \
- $(MAKE) -e SHLIBDIRS=crypto build-shared; \
+ $(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
done; \
fi; \
( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
- if [ "$(PLATFORM)" = "Cygwin" ]; then \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
fi; \
done
do_$(SHLIB_TARGET):
@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
- if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
- libs="$(LIBKRB5) $$libs"; \
- fi; \
$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+ echo 'Libs: -L$${libdir} -lcrypto'; \
+ echo 'Libs.private: $(EX_LIBS)'; \
+ echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
libssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
- echo 'Name: OpenSSL'; \
+ echo 'Name: OpenSSL-libssl'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+ echo 'Requires.private: libcrypto'; \
+ echo 'Libs: -L$${libdir} -lssl'; \
+ echo 'Libs.private: $(EX_LIBS)'; \
+ echo 'Cflags: -I$${includedir}' ) > libssl.pc
openssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
- echo 'Requires: '; \
- echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+ echo 'Requires: libssl libcrypto' ) > openssl.pc
Makefile: Makefile.org Configure config
@echo "Makefile is older than Makefile.org, Configure or config."
@false
libclean:
- rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+ rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
clean: libclean
- rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+ rm -f */*/*.o */*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+ rm -rf *.bak certs/.0
@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
- rm -f $(LIBS)
+ rm -f $(LIBS) tags TAGS
rm -f openssl.pc libssl.pc libcrypto.pc
rm -f speed.* .pure
rm -f $(TARFILE)
- @set -e; for i in $(ONEDIRS) ;\
- do \
- rm -fr $$i/*; \
- done
makefile.one: files
$(PERL) util/mk1mf.pl >makefile.one; \
$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
@set -e; target=files; $(RECURSIVE_BUILD_CMD)
-links:
- @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
- @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
- @set -e; target=links; $(RECURSIVE_BUILD_CMD)
- @if [ -z "$(FIPSCANLIB)" ]; then \
- set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
- fi
-
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
dclean:
- rm -rf *.bak include/openssl certs/.0
@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
rehash: rehash.time
@if [ -z "$(CROSS_COMPILE)" ]; then \
(OPENSSL="`pwd`/util/opensslwrap.sh"; \
[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
- OPENSSL_DEBUG_MEMORY=on; \
- export OPENSSL OPENSSL_DEBUG_MEMORY; \
- $(PERL) tools/c_rehash certs) && \
+ OPENSSL_DEBUG_MEMORY=on; OPENSSL_CONF=/dev/null ; \
+ export OPENSSL OPENSSL_DEBUG_MEMORY OPENSSL_CONF; \
+ $$OPENSSL rehash certs/demo) && \
touch rehash.time; \
else :; fi
test: tests
+test_ordinals:
+ TOP=$(TOP) PERL=$(PERL) $(PERL) test/run_tests.pl test_ordinals
+
tests: rehash
@(cd test && echo "testing..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
- OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
+ @if [ -z "$(CROSS_COMPILE)" ]; then \
+ OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a; \
+ fi
+
+list-tests:
+ @(cd test && \
+ $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. list-tests)
report:
@$(PERL) util/selftest.pl
+update: errors stacks util/libeay.num util/ssleay.num TABLE test_ordinals
+ @set -e; target=update; $(RECURSIVE_BUILD_CMD)
+
depend:
@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
lint:
@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
-tags:
- rm -f TAGS
- find . -name '[^.]*.[ch]' | xargs etags -a
+tags TAGS: FORCE
+ rm -f TAGS tags
+ -ctags -R .
+ -etags -R .
+
+FORCE:
errors:
+ $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
- $(PERL) util/ck_errf.pl -strict */*.c */*/*.c
+ (cd crypto/ct; $(MAKE) PERL=$(PERL) errors)
stacks:
$(PERL) util/mkstack.pl -write
util/ssleay.num::
$(PERL) util/mkdef.pl ssl update
-crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
- $(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
-crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
-crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
- $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
- $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
-
-
-TABLE: Configure
+TABLE: Configure Configurations/*.conf
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
-
# Build distribution tar-file. As the list of files returned by "find" is
# pretty long, on several platforms a "too many arguments" error or similar
# would occur. Therefore the list of files is temporarily stored into a file
# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
# tar does not support the --files-from option.
-tar:
+TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list \
+ --owner openssl:0 --group openssl:0 \
+ --transform 's|^|openssl-$(VERSION)/|' \
+ -cvf -
+
+../$(TARFILE).list:
+ find * \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \
+ \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \
+ \! -name '*test' \! -name '.#*' \! -name '*~' \
+ | sort > ../$(TARFILE).list
+
+tar: ../$(TARFILE).list
find . -type d -print | xargs chmod 755
find . -type f -print | xargs chmod a+r
find . -type f -perm -0100 -print | xargs chmod a+x
- find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
- $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - |\
- gzip --best >../$(TARFILE).gz; \
- rm -f ../$(TARFILE).list; \
+ $(TAR_COMMAND) | gzip --best >../$(TARFILE).gz
+ rm -f ../$(TARFILE).list
ls -l ../$(TARFILE).gz
-tar-snap:
- @$(TAR) $(TARFLAGS) -cvf - \
- `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
+tar-snap: ../$(TARFILE).list
+ $(TAR_COMMAND) > ../$(TARFILE)
+ rm -f ../$(TARFILE).list
ls -l ../$(TARFILE)
dist:
install: all install_docs install_sw
+uninstall: uninstall_sw uninstall_docs
+
install_sw:
- @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
- $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
- $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/private
- @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
- do \
- (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
+ @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALLDIRS)
+ @set -e; for i in include/openssl/*.h; do \
+ (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$$i; \
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$$i ); \
done;
- @set -e; target=install; $(RECURSIVE_BUILD_CMD)
+ @set -e; target=install; for dir in $(INSTALL_SUBS); do $(BUILD_CMD); done
@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
do \
if [ -f "$$i" ]; then \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
- if [ "$(PLATFORM)" != "Cygwin" ]; then \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
- else \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ else \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+ chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
fi ); \
if expr $(PLATFORM) : 'mingw' > /dev/null; then \
( case $$i in \
*ssl*) i=ssleay32.dll;; \
esac; \
echo installing $$i; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
- chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+ chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
fi; \
fi; \
done; \
if [ "$(INSTALLTOP)" != "/usr" ]; then \
echo 'OpenSSL shared libraries have been installed in:'; \
echo ' $(INSTALLTOP)'; \
- echo ''; \
- sed -e '1,/^$$/d' doc/openssl-shared.txt; \
fi; \
fi
cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+uninstall_sw:
+ cd include/openssl && files=* && cd $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl && $(RM) $$files
+ @for i in $(LIBS) ;\
+ do \
+ test -f "$$i" && \
+ echo $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i && \
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ done;
+ @if [ -n "$(SHARED_LIBS)" ]; then \
+ tmp="$(SHARED_LIBS)"; \
+ for i in $${tmp:-x}; \
+ do \
+ if [ -f "$$i" -o -f "$$i.a" ]; then \
+ if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+ c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+ echo $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+ echo $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ else \
+ echo $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+ fi; \
+ if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+ case $$i in \
+ *crypto*) i=libeay32.dll;; \
+ *ssl*) i=ssleay32.dll;; \
+ esac; \
+ echo $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
+ fi; \
+ fi; \
+ done; \
+ fi
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+ $(RM) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+ @target=uninstall; $(RECURSIVE_BUILD_CMD)
+
install_html_docs:
here="`pwd`"; \
+ filecase=; \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+ filecase=-i; \
+ esac; \
for subdir in apps crypto ssl; do \
- mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+ $(PERL) $(TOP)/util/mkdir-p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
for i in doc/$$subdir/*.pod; do \
fn=`basename $$i .pod`; \
echo "installing html/$$fn.$(HTMLSUFFIX)"; \
cat $$i \
| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
- | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+ | pod2html --podroot=doc --htmlroot=.. --podpath=$$subdir:apps:crypto:ssl \
| sed -r 's/<!DOCTYPE.*//g' \
> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
done; \
done
+uninstall_html_docs:
+ here="`pwd`"; \
+ filecase=; \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+ filecase=-i; \
+ esac; \
+ for subdir in apps crypto ssl; do \
+ for i in doc/$$subdir/*.pod; do \
+ fn=`basename $$i .pod`; \
+ $(RM) $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+ $(PERL) util/extract-names.pl < $$i | \
+ grep -v $$filecase "^$$fn\$$" | \
+ while read n; do \
+ $(RM) $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/"$$n".$(HTMLSUFFIX); \
+ done; \
+ done; \
+ done
+
install_docs:
@$(PERL) $(TOP)/util/mkdir-p.pl \
$(INSTALL_PREFIX)$(MANDIR)/man1 \
$(INSTALL_PREFIX)$(MANDIR)/man3 \
$(INSTALL_PREFIX)$(MANDIR)/man5 \
$(INSTALL_PREFIX)$(MANDIR)/man7
- @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
here="`pwd`"; \
filecase=; \
- if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
- fi; \
+ esac; \
set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
+ pod2man \
--section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
+ --release=$(VERSION) `basename $$i`) \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
- sh -c "$$pod2man \
+ pod2man \
--section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`") \
+ --release=$(VERSION) `basename $$i`) \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
done); \
done
+uninstall_docs:
+ @here="`pwd`"; \
+ filecase=; \
+ case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*) \
+ filecase=-i; \
+ esac; \
+ for i in doc/apps/*.pod; do \
+ fn=`basename $$i .pod`; \
+ sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+ echo $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+ $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+ $(PERL) util/extract-names.pl < $$i | \
+ (grep -v $$filecase "^$$fn\$$"; true) | \
+ (grep -v "[ ]"; true) | \
+ while read n; do \
+ echo $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
+ $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
+ done; \
+ done; \
+ for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+ fn=`basename $$i .pod`; \
+ sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+ echo $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+ $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+ $(PERL) util/extract-names.pl < $$i | \
+ (grep -v $$filecase "^$$fn\$$"; true) | \
+ (grep -v "[ ]"; true) | \
+ while read n; do \
+ echo $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
+ $(RM) $(INSTALL_PREFIX)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
+ done; \
+ done
+
# DO NOT DELETE THIS LINE -- make depend depends on it.
projects / openssl.git / blobdiff