##
## Makefile for OpenSSL
##
-
-VERSION=
-MAJOR=
-MINOR=
-SHLIB_VERSION_NUMBER=
-SHLIB_VERSION_HISTORY=
-SHLIB_MAJOR=
-SHLIB_MINOR=
-SHLIB_EXT=
-PLATFORM=dist
-OPTIONS=
-CONFIGURE_ARGS=
-SHLIB_TARGET=
+## {- join("\n## ", @autowarntext) -}
+
+VERSION={- $config{version} -}
+MAJOR={- $config{major} -}
+MINOR={- $config{minor} -}
+SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -}
+SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -}
+SHLIB_MAJOR={- $config{shlib_major} -}
+SHLIB_MINOR={- $config{shlib_minor} -}
+SHLIB_EXT={- $target{shared_extension} -}
+PLATFORM={- $config{target} -}
+OPTIONS={- $config{options} -}
+CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
+SHLIB_TARGET={- $target{shared_target} -}
# HERE indicates where this Makefile lives. This can be used to indicate
# where sub-Makefiles are expected to be. Currently has very limited usage,
# INSTALL_PREFIX is for package builders so that they can configure
# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
-INSTALL_PREFIX=
+INSTALL_PREFIX={- $config{install_prefix} -}
# Do not edit these manually. Use Configure with --prefix or --openssldir
# to change this! Short explanation in the top comment in Configure
-INSTALLTOP=/usr/local
-OPENSSLDIR=$(INSTALLTOP)/ssl
+INSTALLTOP={- $config{prefix} -}
+OPENSSLDIR={- $config{openssldir} -}
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# equal 4.
# PKCS1_CHECK - pkcs1 tests.
-CC= cc
-CFLAG= -O
-DEPFLAG=
-PEX_LIBS=
-EX_LIBS=
-EXE_EXT=
-ARFLAGS=
-AR=ar $(ARFLAGS) r
-RANLIB= ranlib
-NM= nm
-PERL= perl
+CROSS_COMPILE= {- $config{cross_compile_prefix} -}
+CC= $(CROSS_COMPILE){- $target{cc} -}
+CFLAG= {- $config{cflags} -}
+DEPFLAG= {- $config{depflags} -}
+PEX_LIBS= {- $config{prelflags} -}
+EX_LIBS= {- $config{lflags} -}
+EXE_EXT= {- $target{exe_extension} -}
+ARFLAGS= {- $target{arflags} -}
+AR=$(CROSS_COMPILE){- $target{ar} -} $(ARFLAGS) r
+RANLIB= {- $target{ranlib} -}
+NM= $(CROSS_COMPILE){- $target{nm} -}
+PERL= {- $config{perl} -}
#RM= echo --
RM= rm -f
TAR= tar
TARFLAGS= --no-recursion
-MAKEDEPPROG=makedepend
-LIBDIR=lib
+MAKEDEPPROG=$(CROSS_COMPILE){- $config{makedepprog} -}
+LIBDIR={- $config{libdir} -}
# We let the C compiler driver to take care of .s files. This is done in
# order to be excused from maintaining a separate set of architecture
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# the 80386.
-PROCESSOR=
+PROCESSOR= {- $config{processor} -}
# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ=
-BN_ASM= bn_asm.o
-EC_ASM=
-DES_ENC= des_enc.o fcrypt_b.o
-AES_ENC= aes_core.o aes_cbc.o
-BF_ENC= bf_enc.o
-CAST_ENC= c_enc.o
-RC4_ENC= rc4_enc.o
-RC5_ENC= rc5_enc.o
-MD5_ASM_OBJ=
-SHA1_ASM_OBJ=
-RMD160_ASM_OBJ=
-WP_ASM_OBJ=
-CMLL_ENC=
-MODES_ASM_OBJ=
-ENGINES_ASM_OBJ=
-CHACHA_ENC= chacha_enc.o
-POLY1305_ASM_OBJ=
-PERLASM_SCHEME=
+CPUID_OBJ= {- $target{cpuid_obj} -}
+BN_ASM= {- $target{bn_obj} -}
+EC_ASM= {- $target{ec_obj} -}
+DES_ENC= {- $target{des_obj} -}
+AES_ENC= {- $target{aes_obj} -}
+BF_ENC= {- $target{bf_obj} -}
+CAST_ENC= {- $target{cast_obj} -}
+RC4_ENC= {- $target{rc4_obj} -}
+RC5_ENC= {- $target{rc5_obj} -}
+MD5_ASM_OBJ= {- $target{md5_obj} -}
+SHA1_ASM_OBJ= {- $target{sha1_obj} -}
+RMD160_ASM_OBJ= {- $target{rmd160_obj} -}
+WP_ASM_OBJ= {- $target{wp_obj} -}
+CMLL_ENC= {- $target{cmll_obj} -}
+MODES_ASM_OBJ= {- $target{modes_obj} -}
+PADLOCK_ASM_OBJ= {- $target{padlock_obj} -}
+CHACHA_ENC= {- $target{chacha_obj} -}
+POLY1305_ASM_OBJ= {- $target{poly1305_obj} -}
+PERLASM_SCHEME= {- $target{perlasm_scheme} -}
# Zlib stuff
-ZLIB_INCLUDE=
-LIBZLIB=
+ZLIB_INCLUDE={- $withargs{zlib-include} -}
+LIBZLIB={- $withargs{zlib-lib} -}
# This is the location of fipscanister.o and friends.
# The FIPS module build will place it $(INSTALLTOP)/lib
# $(INSTALLTOP) for this build may be different so hard
# code the path.
-FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
+FIPSLIBDIR={- $config{fipslibdir} -}
# The location of the library which contains fipscanister.o
# normally it will be libcrypto. If not compiling in FIPS mode
# at all this is empty making it a useful test for a FIPS compile.
-FIPSCANLIB=
+FIPSCANLIB={- $config{fips} ? "libcrypto" : "" -}
# Shared library base address. Currently only used on Windows.
#
-BASEADDR=
+BASEADDR={- $config{baseaddr} -}
-DIRS= crypto ssl engines apps test tools
+DIRS= {- join(" ", @{$config{dirs}}) -}
SHLIBDIRS= crypto ssl
INSTALL_SUBS= engines apps tools
# dirs in crypto to build
-SDIRS= \
- objects \
- md2 md4 md5 sha mdc2 hmac ripemd whrlpool poly1305 \
- des aes rc2 rc4 rc5 idea bf cast camellia seed chacha modes \
- bn ec rsa dsa dh dso engine \
- buffer bio stack lhash rand err \
- evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui \
- cms pqueue ts jpake srp store cmac ct async kdf
-# keep in mind that the above list is adjusted by ./Configure
-# according to no-xxx arguments...
+SDIRS= {- join(" ", @{$config{sdirs}}) -}
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_LIBS=
-SHARED_LIBS_LINK_EXTS=
-SHARED_LDFLAGS=
+SHARED_LIBS={- '$(SHARED_CRYPTO) $(SHARED_SSL)' if (!$config{no_shared}) -}
+SHARED_LIBS_LINK_EXTS={- $config{shared_link_extensions} -}
+SHARED_LDFLAGS={- $target{shared_ldflag} -}
GENERAL= Makefile
BASENAME= openssl
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
- ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
+ PADLOCK_ASM_OBJ='$(PADLOCK_ASM_OBJ)' \
CHACHA_ENC='$(CHACHA_ENC)' \
POLY1305_ASM_OBJ='$(POLY1305_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
projects / openssl.git / blobdiff