INSTALLATION ON THE UNIX PLATFORM
---------------------------------
- [See INSTALL.W32 for instructions for compiling OpenSSL on Windows systems,
- and INSTALL.VMS for installing on OpenVMS systems.]
+ [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
+ and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
+ INSTALL.MacOS and INSTALL.NW.
+
+ This document describes installation on operating systems in the Unix
+ family.]
To install OpenSSL, you will need:
+ * make
* Perl 5
* an ANSI C compiler
+ * a development environment in form of development libraries and C
+ header files
* a supported Unix operating system
Quick Start
Configuration Options
---------------------
- There are several options to ./config to customize the build:
+ There are several options to ./config (or ./Configure) to customize
+ the build:
--prefix=DIR Install in DIR/bin, DIR/lib, DIR/include/openssl.
Configuration files used by OpenSSL will be in DIR/ssl
--openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
the library files and binaries are also installed there.
- rsaref Build with RSADSI's RSAREF toolkit (this assumes that
- librsaref.a is in the library search path).
-
no-threads Don't try to build with support for multi-threaded
applications.
This will usually require additional system-dependent options!
See "Note on multi-threading" below.
+ no-zlib Don't try to build with support for zlib compression and
+ decompression.
+
+ zlib Build with support for zlib compression/decompression.
+
+ zlib-dynamic Like "zlib", but has OpenSSL load the zlib library dynamically
+ when needed. This is only supported on systems where loading
+ of shared libraries is supported. This is the default choice.
+
+ no-shared Don't try to create shared libraries.
+
+ shared In addition to the usual static libraries, create shared
+ libraries on platforms where it's supported. See "Note on
+ shared libraries" below.
+
no-asm Do not use assembler code.
- 386 Use the 80386 instruction set only (the default x86 code is
- more efficient, but requires at least a 486).
+ 386 In 32-bit x86 builds, when generating assembly modules,
+ use the 80386 instruction set only (the default x86 code
+ is more efficient, but requires at least a 486). Note:
+ This doesn't affect code generated by compiler, you're
+ likely to complement configuration command line with
+ suitable compiler-specific option.
+
+ no-sse2 Exclude SSE2 code paths from 32-bit x86 assembly modules.
+ Normally SSE2 extension is detected at run-time, but the
+ decision whether or not the machine code will be executed
+ is taken solely on CPU capability vector. This means that
+ if you happen to run OS kernel which does not support SSE2
+ extension on Intel P4 processor, then your application
+ might be exposed to "illegal instruction" exception.
+ There might be a way to enable support in kernel, e.g.
+ FreeBSD kernel can be compiled with CPU_ENABLE_SSE, and
+ there is a way to disengage SSE2 code paths upon application
+ start-up, but if you aim for wider "audience" running
+ such kernel, consider no-sse2. Both the 386 and
+ no-asm options imply no-sse2.
no-<cipher> Build without the specified cipher (bf, cast, des, dh, dsa,
hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
The crypto/<cipher> directory can be removed after running
"make depend".
- -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
+ -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
be passed through to the compiler to allow you to
define preprocessor symbols, specify additional libraries,
- library directories or other compiler options.
-
+ library directories or other compiler options. It might be
+ worth noting that some compilers generate code specifically
+ for processor the compiler currently executes on. This is
+ not necessarily what you might have in mind, since it might
+ be unsuitable for execution on other, typically older,
+ processor. Consult your compiler documentation.
+
+ -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
+ BSD. Useful if you are running ocf-linux or something
+ similar. Once enabled you can also enable the use of
+ cryptodev digests, which is usually slower unless you have
+ large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
+ it.
Installation in Detail
----------------------
This guesses at your operating system (and compiler, if necessary) and
configures OpenSSL based on this guess. Run ./config -t to see
- if it guessed correctly. If it did not get it correct or you want to
- use a different compiler then go to step 1b. Otherwise go to step 2.
+ if it guessed correctly. If you want to use a different compiler, you
+ are cross-compiling for another platform, or the ./config guess was
+ wrong for other reasons, go to step 1b. Otherwise go to step 2.
On some systems, you can include debugging information as follows:
If your system is not available, you will have to edit the Configure
program and add the correct configuration for your system. The
- generic configurations "cc" or "gcc" should usually work.
+ generic configurations "cc" or "gcc" should usually work on 32 bit
+ systems.
Configure creates the file Makefile.ssl from Makefile.org and
defines various macros in crypto/opensslconf.h (generated from
OpenSSL binary ("openssl"). The libraries will be built in the top-level
directory, and the binary will be in the "apps" directory.
- If "make" fails, please report the problem to <openssl-bugs@openssl.org>
- (note that your message will be forwarded to a public mailing list).
- Include the output of "./config -t" and the OpenSSL version
- number in your message.
+ If the build fails, look at the output. There may be reasons
+ for the failure that aren't problems in OpenSSL itself (like
+ missing standard headers). If you are having problems you can
+ get help by sending an email to the openssl-users email list (see
+ https://www.openssl.org/community/mailinglists.html for details). If
+ it is a bug with OpenSSL itself, please open an issue on GitHub, at
+ https://github.com/openssl/openssl/issues. Please review the existing
+ ones first; maybe the bug was already reported or has already been
+ fixed.
- [If you encounter assembler error messages, try the "no-asm"
- configuration option as an immediate fix.]
+ (If you encounter assembler error messages, try the "no-asm"
+ configuration option as an immediate fix.)
Compiling parts of OpenSSL with gcc and others with the system
compiler will result in unresolved symbols on some systems.
$ make test
- If a test fails, try removing any compiler optimization flags from
- the CFLAGS line in Makefile.ssl and run "make clean; make". Please
- send a bug report to <openssl-bugs@openssl.org>, including the
- output of "openssl version -a" and of the failed test.
+ If a test fails, look at the output. There may be reasons for
+ the failure that isn't a problem in OpenSSL itself (like a missing
+ or malfunctioning bc). If it is a problem with OpenSSL itself,
+ try removing any compiler optimization flags from the CFLAG line
+ in Makefile.ssl and run "make clean; make". To report a bug please open an
+ issue on GitHub, at https://github.com/openssl/openssl/issues.
4. If everything tests ok, install OpenSSL with
certs Initially empty, this is the default location
for certificate files.
+ man/man1 Manual pages for the 'openssl' command line tool
+ man/man3 Manual pages for the libraries (very incomplete)
misc Various scripts.
private Initially empty, this is the default location
for private key files.
compile programs with libcrypto or libssl.
lib Contains the OpenSSL library files themselves.
+ Use "make install_sw" to install the software without documentation,
+ and "install_docs_html" to install HTML renditions of the manual
+ pages.
+
Package builders who want to configure the library for standard
locations, but have the package installed somewhere else so that
it can easily be packaged, can use
you can still use "no-threads" to suppress an annoying warning message
from the Configure script.)
+
+ Note on shared libraries
+ ------------------------
+
+ Shared libraries have certain caveats. Binary backward compatibility
+ can't be guaranteed before OpenSSL version 1.0. The only reason to
+ use them would be to conserve memory on systems where several programs
+ are using OpenSSL.
+
+ For some systems, the OpenSSL Configure script knows what is needed to
+ build shared libraries for libcrypto and libssl. On these systems,
+ the shared libraries are currently not created by default, but giving
+ the option "shared" will get them created. This method supports Makefile
+ targets for shared library creation, like linux-shared. Those targets
+ can currently be used on their own just as well, but this is expected
+ to change in future versions of OpenSSL.
+
+ Note on random number generation
+ --------------------------------
+
+ Availability of cryptographically secure random numbers is required for
+ secret key generation. OpenSSL provides several options to seed the
+ internal PRNG. If not properly seeded, the internal PRNG will refuse
+ to deliver random bytes and a "PRNG not seeded error" will occur.
+ On systems without /dev/urandom (or similar) device, it may be necessary
+ to install additional support software to obtain random seed.
+ Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
+ and the FAQ for more information.
+
+ Note on support for multiple builds
+ -----------------------------------
+
+ OpenSSL is usually built in its source tree. Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
+
+ mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+ cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+ (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+ mkdir -p `dirname $F`
+ rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+ echo $F '->' $OPENSSL_SOURCE/$F
+ done
+ make -f Makefile.org clean
+
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
+
+ Also, operations like 'make update' should still be made in the source tree.
projects / openssl.git / blobdiff