INSTALLATION ON THE UNIX PLATFORM
---------------------------------
- [See INSTALL.W32 for instructions for compiling OpenSSL on Windows systems,
- and INSTALL.VMS for installing on OpenVMS systems.]
+ [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
+ and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
+ INSTALL.MacOS and INSTALL.NW.
+
+ This document describes installation on operating systems in the Unix
+ family.]
To install OpenSSL, you will need:
+ * make
* Perl 5
* an ANSI C compiler
+ * a development environment in form of development libraries and C
+ header files
* a supported Unix operating system
Quick Start
Configuration Options
---------------------
- There are several options to ./config to customize the build:
+ There are several options to ./config (or ./Configure) to customize
+ the build:
--prefix=DIR Install in DIR/bin, DIR/lib, DIR/include/openssl.
Configuration files used by OpenSSL will be in DIR/ssl
--openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
the library files and binaries are also installed there.
- rsaref Build with RSADSI's RSAREF toolkit (this assumes that
- librsaref.a is in the library search path).
-
no-threads Don't try to build with support for multi-threaded
applications.
This will usually require additional system-dependent options!
See "Note on multi-threading" below.
+ no-zlib Don't try to build with support for zlib compression and
+ decompression.
+
+ zlib Build with support for zlib compression/decompression.
+
+ zlib-dynamic Like "zlib", but has OpenSSL load the zlib library dynamically
+ when needed. This is only supported on systems where loading
+ of shared libraries is supported. This is the default choice.
+
+ no-shared Don't try to create shared libraries.
+
+ shared In addition to the usual static libraries, create shared
+ libraries on platforms where it's supported. See "Note on
+ shared libraries" below.
+
no-asm Do not use assembler code.
386 Use the 80386 instruction set only (the default x86 code is
- more efficient, but requires at least a 486).
+ more efficient, but requires at least a 486). Note: Use
+ compiler flags for any other CPU specific configuration,
+ e.g. "-m32" to build x86 code on an x64 system.
+
+ no-sse2 Exclude SSE2 code pathes. Normally SSE2 extention is
+ detected at run-time, but the decision whether or not the
+ machine code will be executed is taken solely on CPU
+ capability vector. This means that if you happen to run OS
+ kernel which does not support SSE2 extension on Intel P4
+ processor, then your application might be exposed to
+ "illegal instruction" exception. There might be a way
+ to enable support in kernel, e.g. FreeBSD kernel can be
+ compiled with CPU_ENABLE_SSE, and there is a way to
+ disengage SSE2 code pathes upon application start-up,
+ but if you aim for wider "audience" running such kernel,
+ consider no-sse2. Both 386 and no-asm options above imply
+ no-sse2.
no-<cipher> Build without the specified cipher (bf, cast, des, dh, dsa,
hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
The crypto/<cipher> directory can be removed after running
"make depend".
- -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
+ -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
be passed through to the compiler to allow you to
define preprocessor symbols, specify additional libraries,
library directories or other compiler options.
This guesses at your operating system (and compiler, if necessary) and
configures OpenSSL based on this guess. Run ./config -t to see
- if it guessed correctly. If it did not get it correct or you want to
- use a different compiler then go to step 1b. Otherwise go to step 2.
+ if it guessed correctly. If you want to use a different compiler, you
+ are cross-compiling for another platform, or the ./config guess was
+ wrong for other reasons, go to step 1b. Otherwise go to step 2.
On some systems, you can include debugging information as follows:
If your system is not available, you will have to edit the Configure
program and add the correct configuration for your system. The
- generic configurations "cc" or "gcc" should usually work.
+ generic configurations "cc" or "gcc" should usually work on 32 bit
+ systems.
Configure creates the file Makefile.ssl from Makefile.org and
defines various macros in crypto/opensslconf.h (generated from
OpenSSL binary ("openssl"). The libraries will be built in the top-level
directory, and the binary will be in the "apps" directory.
- If "make" fails, please report the problem to <openssl-bugs@openssl.org>.
- Include the output of "./config -t" and the OpenSSL version
- number in your message.
+ If "make" fails, look at the output. There may be reasons for
+ the failure that aren't problems in OpenSSL itself (like missing
+ standard headers). If it is a problem with OpenSSL itself, please
+ report the problem to <openssl-bugs@openssl.org> (note that your
+ message will be recorded in the request tracker publicly readable
+ via http://www.openssl.org/support/rt.html and will be forwarded to a
+ public mailing list). Include the output of "make report" in your message.
+ Please check out the request tracker. Maybe the bug was already
+ reported or has already been fixed.
[If you encounter assembler error messages, try the "no-asm"
configuration option as an immediate fix.]
$ make test
- If a test fails, try removing any compiler optimization flags from
- the CFLAGS line in Makefile.ssl and run "make clean; make". Please
- send a bug report to <openssl-bugs@openssl.org>, including the
- output of "openssl version -a" and of the failed test.
+ If a test fails, look at the output. There may be reasons for
+ the failure that isn't a problem in OpenSSL itself (like a missing
+ or malfunctioning bc). If it is a problem with OpenSSL itself,
+ try removing any compiler optimization flags from the CFLAG line
+ in Makefile.ssl and run "make clean; make". Please send a bug
+ report to <openssl-bugs@openssl.org>, including the output of
+ "make report" in order to be added to the request tracker at
+ http://www.openssl.org/support/rt.html.
4. If everything tests ok, install OpenSSL with
certs Initially empty, this is the default location
for certificate files.
+ man/man1 Manual pages for the 'openssl' command line tool
+ man/man3 Manual pages for the libraries (very incomplete)
misc Various scripts.
private Initially empty, this is the default location
for private key files.
compile programs with libcrypto or libssl.
lib Contains the OpenSSL library files themselves.
+ Use "make install_sw" to install the software without documentation,
+ and "install_docs_html" to install HTML renditions of the manual
+ pages.
+
Package builders who want to configure the library for standard
locations, but have the package installed somewhere else so that
it can easily be packaged, can use
from the Configure script.)
---------------------------------------------------------------------------------
-The orignal Unix build instructions from SSLeay follow.
-Note: some of this may be out of date and no longer applicable
---------------------------------------------------------------------------------
-
-# When bringing the SSLeay distribution back from the evil intel world
-# of Windows NT, do the following to make it nice again under unix :-)
-# You don't normally need to run this.
-sh util/fixNT.sh # This only works for NT now - eay - 21-Jun-1996
-
-# If you have perl, and it is not in /usr/local/bin, you can run
-perl util/perlpath.pl /new/path
-# and this will fix the paths in all the scripts. DO NOT put
-# /new/path/perl, just /new/path. The build
-# environment always run scripts as 'perl perlscript.pl' but some of the
-# 'applications' are easier to usr with the path fixed.
-
-# Edit crypto/cryptlib.h, tools/c_rehash, and Makefile.ssl
-# to set the install locations if you don't like
-# the default location of /usr/local/ssl
-# Do this by running
-perl util/ssldir.pl /new/ssl/home
-# if you have perl, or by hand if not.
-
-# If things have been stuffed up with the sym links, run
-make -f Makefile.ssl links
-# This will re-populate lib/include with symlinks and for each
-# directory, link Makefile to Makefile.ssl
-
-# Setup the machine dependent stuff for the top level makefile
-# and some select .h files
-# If you don't have perl, this will bomb, in which case just edit the
-# top level Makefile.ssl
-./Configure 'system type'
-
-# The 'Configure' command contains default configuration parameters
-# for lots of machines. Configure edits 5 lines in the top level Makefile
-# It modifies the following values in the following files
-Makefile.ssl CC CFLAG EX_LIBS BN_MULW
-crypto/des/des.h DES_LONG
-crypto/des/des_locl.h DES_PTR
-crypto/md2/md2.h MD2_INT
-crypto/rc4/rc4.h RC4_INT
-crypto/rc4/rc4_enc.c RC4_INDEX
-crypto/rc2/rc2.h RC2_INT
-crypto/bf/bf_locl.h BF_INT
-crypto/idea/idea.h IDEA_INT
-crypto/bn/bn.h BN_LLONG (and defines one of SIXTY_FOUR_BIT,
- SIXTY_FOUR_BIT_LONG, THIRTY_TWO_BIT,
- SIXTEEN_BIT or EIGHT_BIT)
-Please remember that all these files are actually copies of the file with
-a .org extention. So if you change crypto/des/des.h, the next time
-you run Configure, it will be runover by a 'configured' version of
-crypto/des/des.org. So to make the changer the default, change the .org
-files. The reason these files have to be edited is because most of
-these modifications change the size of fundamental data types.
-While in theory this stuff is optional, it often makes a big
-difference in performance and when using assember, it is importaint
-for the 'Bignum bits' match those required by the assember code.
-A warning for people using gcc with sparc cpu's. Gcc needs the -mv8
-flag to use the hardware multiply instruction which was not present in
-earlier versions of the sparc CPU. I define it by default. If you
-have an old sparc, and it crashes, try rebuilding with this flag
-removed. I am leaving this flag on by default because it makes
-things run 4 times faster :-)
-
-# clean out all the old stuff
-make clean
-
-# Do a make depend only if you have the makedepend command installed
-# This is not needed but it does make things nice when developing.
-make depend
-
-# make should build everything
-make
-
-# fix up the demo certificate hash directory if it has been stuffed up.
-make rehash
-
-# test everything
-make test
-
-# install the lot
-make install
-
-# It is worth noting that all the applications are built into the one
-# program, ssleay, which is then has links from the other programs
-# names to it.
-# The applicatons can be built by themselves, just don't define the
-# 'MONOLITH' flag. So to build the 'enc' program stand alone,
-gcc -O2 -Iinclude apps/enc.c apps/apps.c libcrypto.a
-
-# Other useful make options are
-make makefile.one
-# which generate a 'makefile.one' file which will build the complete
-# SSLeay distribution with temp. files in './tmp' and 'installable' files
-# in './out'
-
-# Have a look at running
-perl util/mk1mf.pl help
-# this can be used to generate a single makefile and is about the only
-# way to generate makefiles for windows.
-
-# There is actually a final way of building SSLeay.
-gcc -O2 -c -Icrypto -Iinclude crypto/crypto.c
-gcc -O2 -c -Issl -Iinclude ssl/ssl.c
-# and you now have the 2 libraries as single object files :-).
-# If you want to use the assember code for your particular platform
-# (DEC alpha/x86 are the main ones, the other assember is just the
-# output from gcc) you will need to link the assember with the above generated
-# object file and also do the above compile as
-gcc -O2 -DBN_ASM -c -Icrypto -Iinclude crypto/crypto.c
-
-This last option is probably the best way to go when porting to another
-platform or building shared libraries. It is not good for development so
-I don't normally use it.
-
-To build shared libararies under unix, have a look in shlib, basically
-you are on your own, but it is quite easy and all you have to do
-is compile 2 (or 3) files.
-
-For mult-threading, have a read of doc/threads.doc. Again it is quite
-easy and normally only requires some extra callbacks to be defined
-by the application.
-The examples for solaris and windows NT/95 are in the mt directory.
-
-have fun
-
-eric 25-Jun-1997
-
-IRIX 5.x will build as a 32 bit system with mips1 assember.
-IRIX 6.x will build as a 64 bit system with mips3 assember. It conforms
-to n32 standards. In theory you can compile the 64 bit assember under
-IRIX 5.x but you will have to have the correct system software installed.
+ Note on shared libraries
+ ------------------------
+
+ Shared libraries have certain caveats. Binary backward compatibility
+ can't be guaranteed before OpenSSL version 1.0. The only reason to
+ use them would be to conserve memory on systems where several programs
+ are using OpenSSL.
+
+ For some systems, the OpenSSL Configure script knows what is needed to
+ build shared libraries for libcrypto and libssl. On these systems,
+ the shared libraries are currently not created by default, but giving
+ the option "shared" will get them created. This method supports Makefile
+ targets for shared library creation, like linux-shared. Those targets
+ can currently be used on their own just as well, but this is expected
+ to change in future versions of OpenSSL.
+
+ Note on random number generation
+ --------------------------------
+
+ Availability of cryptographically secure random numbers is required for
+ secret key generation. OpenSSL provides several options to seed the
+ internal PRNG. If not properly seeded, the internal PRNG will refuse
+ to deliver random bytes and a "PRNG not seeded error" will occur.
+ On systems without /dev/urandom (or similar) device, it may be necessary
+ to install additional support software to obtain random seed.
+ Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
+ and the FAQ for more information.
+
+ Note on support for multiple builds
+ -----------------------------------
+
+ OpenSSL is usually built in its source tree. Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
+
+ mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+ cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+ (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+ mkdir -p `dirname $F`
+ rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+ echo $F '->' $OPENSSL_SOURCE/$F
+ done
+ make -f Makefile.org clean
+
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
+
+ Also, operations like 'make update' should still be made in the source tree.
projects / openssl.git / blobdiff