For additional platform specific requirements, solutions to specific
issues and other details, please read one of these:
+ * NOTES.UNIX (any supported Unix like system)
* NOTES.VMS (OpenVMS)
* NOTES.WIN (any supported Windows)
* NOTES.DJGPP (DOS platform with DJGPP)
available if the GOST algorithms are also available through
loading an externally supplied engine.
- enable-heartbeats
- Build support for DTLS heartbeats.
-
no-hw-padlock
Don't build the padlock engine.
Don't build SRTP support
no-sse2
- Exclude SSE2 code paths. Normally SSE2 extension is
- detected at run-time, but the decision whether or not the
- machine code will be executed is taken solely on CPU
- capability vector. This means that if you happen to run OS
- kernel which does not support SSE2 extension on Intel P4
- processor, then your application might be exposed to
- "illegal instruction" exception. There might be a way
- to enable support in kernel, e.g. FreeBSD kernel can be
- compiled with CPU_ENABLE_SSE, and there is a way to
- disengage SSE2 code paths upon application start-up,
- but if you aim for wider "audience" running such kernel,
- consider no-sse2. Both the 386 and no-asm options imply
- no-sse2.
+ Exclude SSE2 code paths from 32-bit x86 assembly modules.
+ Normally SSE2 extension is detected at run-time, but the
+ decision whether or not the machine code will be executed
+ is taken solely on CPU capability vector. This means that
+ if you happen to run OS kernel which does not support SSE2
+ extension on Intel P4 processor, then your application
+ might be exposed to "illegal instruction" exception.
+ There might be a way to enable support in kernel, e.g.
+ FreeBSD kernel can be compiled with CPU_ENABLE_SSE, and
+ there is a way to disengage SSE2 code paths upon application
+ start-up, but if you aim for wider "audience" running
+ such kernel, consider no-sse2. Both the 386 and
+ no-asm options imply no-sse2.
enable-ssl-trace
Build with the SSL Trace capabilities (adds the "-trace"
the OpenSSL tests also use the command line applications the
tests will also be skipped.
+ no-tests
+ Don't build test programs or run any test.
+
no-threads
Don't try to build with support for multi-threaded
applications.
require additional system-dependent options! See "Note on
multi-threading" below.
+ enable-tls13downgrade
+ TODO(TLS1.3): Make this enabled by default and remove the
+ option when TLSv1.3 is out of draft
+ TLSv1.3 offers a downgrade protection mechanism. This is
+ implemented but disabled by default. It should not typically
+ be enabled except for testing purposes. Otherwise this could
+ cause problems if a pre-RFC version of OpenSSL talks to an
+ RFC implementation (it will erroneously be detected as a
+ downgrade).
+
no-ts
Don't build Time Stamping Authority support.
where loading of shared libraries is supported.
386
- On Intel hardware, use the 80386 instruction set only
- (the default x86 code is more efficient, but requires at
- least a 486). Note: Use compiler flags for any other CPU
- specific configuration, e.g. "-m32" to build x86 code on
- an x64 system.
+ In 32-bit x86 builds, when generating assembly modules,
+ use the 80386 instruction set only (the default x86 code
+ is more efficient, but requires at least a 486). Note:
+ This doesn't affect code generated by compiler, you're
+ likely to complement configuration command line with
+ suitable compiler-specific option.
enable-tls1_3
TODO(TLS1.3): Make this enabled by default
Build without support for the specified algorithm, where
<alg> is one of: bf, blake2, camellia, cast, chacha, cmac,
des, dh, dsa, ecdh, ecdsa, idea, md4, mdc2, ocb, poly1305,
- rc2, rc4, rmd160, scrypt, seed or whirlpool. The "ripemd"
- algorithm is deprecated and if used is synonymous with rmd160.
+ rc2, rc4, rmd160, scrypt, seed, siphash or whirlpool. The
+ "ripemd" algorithm is deprecated and if used is synonymous
+ with rmd160.
-Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx
These system specific options will be passed through to the
compiler to allow you to define preprocessor symbols, specify
additional libraries, library directories or other compiler
- options.
+ options. It might be worth noting that some compilers
+ generate code specifically for processor the compiler
+ currently executes on. This is not necessarily what you might
+ have in mind, since it might be unsuitable for execution on
+ other, typically older, processor. Consult your compiler
+ documentation.
Installation in Detail
("openssl"). The libraries will be built in the top-level directory,
and the binary will be in the "apps" subdirectory.
- If the build fails, look at the output. There may be reasons for
- the failure that aren't problems in OpenSSL itself (like missing
- standard headers). If you are having problems you can get help by
- sending an email to the openssl-users email list (see
- https://www.openssl.org/community/mailinglists.html for details). If it
- is a bug with OpenSSL itself, please report the problem to
- <rt@openssl.org> (note that your message will be recorded in the request
- tracker publicly readable at
- https://www.openssl.org/community/index.html#bugs and will be
- forwarded to a public mailing list). Please check out the request
- tracker. Maybe the bug was already reported or has already been
+ If the build fails, look at the output. There may be reasons
+ for the failure that aren't problems in OpenSSL itself (like
+ missing standard headers). If you are having problems you can
+ get help by sending an email to the openssl-users email list (see
+ https://www.openssl.org/community/mailinglists.html for details). If
+ it is a bug with OpenSSL itself, please open an issue on GitHub, at
+ https://github.com/openssl/openssl/issues. Please review the existing
+ ones first; maybe the bug was already reported or has already been
fixed.
(If you encounter assembler error messages, try the "no-asm"
-xxx Removes 'xxx' from the current set of tests. If this is the
first token in the list, the current set of tests is first
assigned the whole set of available tests, effectively making
- this token equivalent to TESTS="alltests -xxx"
+ this token equivalent to TESTS="alltests -xxx".
+ nn Adds the test group 'nn' (which is a number) to the current
+ set of tests.
+ -nn Removes the test group 'nn' from the current set of tests.
+ If this is the first token in the list, the current set of
+ tests is first assigned the whole set of available tests,
+ effectively making this token equivalent to
+ TESTS="alltests -xxx".
Also, all tokens except for "alltests" may have wildcards, such as *.
(on Unix and Windows, BSD style wildcards are supported, while on VMS,
$ make TESTS='test_ssl* -test_ssl_*' test
+ Example: Only test group 10:
+
+ $ make TESTS='10'
+
+ Example: All tests except the slow group (group 99):
+
+ $ make TESTS='-99'
+
+ Example: All tests in test groups 80 to 99 except for tests in group 90:
+
+ $ make TESTS='[89]? -90'
+
Note on multi-threading
-----------------------
and libssl-1_1-x64.dll for 64-bit x86_64 Windows, and libcrypto-1_1-ia64.dll
and libssl-1_1-ia64.dll for IA64 Windows. With MSVC, the import libraries
are named libcrypto.lib and libssl.lib, while with MingW, they are named
- libcrypto.dll.a and libddl.dll.a.
+ libcrypto.dll.a and libssl.dll.a.
On VMS, shareable images (VMS speak for shared libraries) are named
ossl$libcrypto0101_shr.exe and ossl$libssl0101_shr.exe. However, when
projects / openssl.git / blobdiff