For additional platform specific requirements, solutions to specific
issues and other details, please read one of these:
+ * NOTES.UNIX (any supported Unix like system)
* NOTES.VMS (OpenVMS)
* NOTES.WIN (any supported Windows)
* NOTES.DJGPP (DOS platform with DJGPP)
$ @config --prefix=PROGRAM:[INSTALLS] --openssldir=SYS$MANAGER:[OPENSSL]
+ (Note: if you do add options to the configuration command, please make sure
+ you've read more than just this Quick Start, such as relevant NOTES.* files,
+ the options outline below, as configuration options may change the outcome
+ in otherwise unexpected ways)
+
Configuration Options
---------------------
no-err
Don't compile in any error strings.
+ enable-external-tests
+ Enable building of integration with external test suites.
+ This is a developer option and may not work on all platforms.
+ The only supported external test suite at the current time is
+ the BoringSSL test suite. See the file test/README.external
+ for further details.
+
no-filenames
Don't compile in filename and line number information (e.g.
for errors and memory allocation).
available if the GOST algorithms are also available through
loading an externally supplied engine.
- enable-heartbeats
- Build support for DTLS heartbeats.
-
no-hw-padlock
Don't build the padlock engine.
Don't build SRTP support
no-sse2
- Exclude SSE2 code paths. Normally SSE2 extension is
- detected at run-time, but the decision whether or not the
- machine code will be executed is taken solely on CPU
- capability vector. This means that if you happen to run OS
- kernel which does not support SSE2 extension on Intel P4
- processor, then your application might be exposed to
- "illegal instruction" exception. There might be a way
- to enable support in kernel, e.g. FreeBSD kernel can be
- compiled with CPU_ENABLE_SSE, and there is a way to
- disengage SSE2 code paths upon application start-up,
- but if you aim for wider "audience" running such kernel,
- consider no-sse2. Both the 386 and no-asm options imply
- no-sse2.
+ Exclude SSE2 code paths from 32-bit x86 assembly modules.
+ Normally SSE2 extension is detected at run-time, but the
+ decision whether or not the machine code will be executed
+ is taken solely on CPU capability vector. This means that
+ if you happen to run OS kernel which does not support SSE2
+ extension on Intel P4 processor, then your application
+ might be exposed to "illegal instruction" exception.
+ There might be a way to enable support in kernel, e.g.
+ FreeBSD kernel can be compiled with CPU_ENABLE_SSE, and
+ there is a way to disengage SSE2 code paths upon application
+ start-up, but if you aim for wider "audience" running
+ such kernel, consider no-sse2. Both the 386 and
+ no-asm options imply no-sse2.
enable-ssl-trace
Build with the SSL Trace capabilities (adds the "-trace"
has an impact when not built "shared".
no-stdio
- Don't use any C "stdio" features. Only libcrypto and libssl
- can be built in this way. Using this option will suppress
+ Don't use anything from the C header file "stdio.h" that
+ makes use of the "FILE" type. Only libcrypto and libssl can
+ be built in this way. Using this option will suppress
building the command line applications. Additionally since
the OpenSSL tests also use the command line applications the
tests will also be skipped.
+ no-tests
+ Don't build test programs or run any test.
+
no-threads
Don't try to build with support for multi-threaded
applications.
require additional system-dependent options! See "Note on
multi-threading" below.
+ enable-tls13downgrade
+ TODO(TLS1.3): Make this enabled by default and remove the
+ option when TLSv1.3 is out of draft
+ TLSv1.3 offers a downgrade protection mechanism. This is
+ implemented but disabled by default. It should not typically
+ be enabled except for testing purposes. Otherwise this could
+ cause problems if a pre-RFC version of OpenSSL talks to an
+ RFC implementation (it will erroneously be detected as a
+ downgrade).
+
no-ts
Don't build Time Stamping Authority support.
where loading of shared libraries is supported.
386
- On Intel hardware, use the 80386 instruction set only
- (the default x86 code is more efficient, but requires at
- least a 486). Note: Use compiler flags for any other CPU
- specific configuration, e.g. "-m32" to build x86 code on
- an x64 system.
+ In 32-bit x86 builds, when generating assembly modules,
+ use the 80386 instruction set only (the default x86 code
+ is more efficient, but requires at least a 486). Note:
+ This doesn't affect code generated by compiler, you're
+ likely to complement configuration command line with
+ suitable compiler-specific option.
no-<prot>
Don't build support for negotiating the specified SSL/TLS
- protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2, dtls,
- dtls1 or dtls1_2). If "no-tls" is selected then all of tls1,
- tls1_1 and tls1_2 are disabled. Similarly "no-dtls" will
- disable dtls1 and dtls1_2. The "no-ssl" option is synonymous
- with "no-ssl3". Note this only affects version negotiation.
- OpenSSL will still provide the methods for applications to
- explicitly select the individual protocol versions.
+ protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2,
+ tls1_3, dtls, dtls1 or dtls1_2). If "no-tls" is selected then
+ all of tls1, tls1_1, tls1_2 and tls1_3 are disabled.
+ Similarly "no-dtls" will disable dtls1 and dtls1_2. The
+ "no-ssl" option is synonymous with "no-ssl3". Note this only
+ affects version negotiation. OpenSSL will still provide the
+ methods for applications to explicitly select the individual
+ protocol versions.
no-<prot>-method
As for no-<prot> but in addition do not build the methods for
applications to explicitly select individual protocol
- versions.
+ versions. Note that there is no "no-tls1_3-method" option
+ because there is no application method for TLSv1.3. Using
+ individual protocol methods directly is deprecated.
+ Applications should use TLS_method() instead.
enable-<alg>
Build with support for the specified algorithm, where <alg>
no-<alg>
Build without support for the specified algorithm, where
- <alg> is one of: bf, blake2, camellia, cast, chacha, cmac,
- des, dh, dsa, ecdh, ecdsa, idea, md4, md5, mdc2, ocb,
- ploy1305, rc2, rc4, rmd160, scrypt, seed or whirlpool. The
- "ripemd" algorithm is deprecated and if used is synonymous
- with rmd160.
+ <alg> is one of: aria, bf, blake2, camellia, cast, chacha,
+ cmac, des, dh, dsa, ecdh, ecdsa, idea, md4, mdc2, ocb,
+ poly1305, rc2, rc4, rmd160, scrypt, seed, siphash, sm3, sm4
+ or whirlpool. The "ripemd" algorithm is deprecated and if
+ used is synonymous with rmd160.
+
+ -Dxxx, -Ixxx, -Wp, -lxxx, -Lxxx, -Wl, -rpath, -R, -framework, -static
+ These system specific options will be recognised and
+ passed through to the compiler to allow you to define
+ preprocessor symbols, specify additional libraries, library
+ directories or other compiler options. It might be worth
+ noting that some compilers generate code specifically for
+ processor the compiler currently executes on. This is not
+ necessarily what you might have in mind, since it might be
+ unsuitable for execution on other, typically older,
+ processor. Consult your compiler documentation.
+
+ Take note of the VAR=value documentation below and how
+ these flags interact with those variables.
+
+ -xxx, +xxx
+ Additional options that are not otherwise recognised are
+ passed through as they are to the compiler as well. Again,
+ consult your compiler documentation.
+
+ Take note of the VAR=value documentation below and how
+ these flags interact with those variables.
+
+ VAR=value
+ Assignment if environment variable for Configure. These
+ work just like normal environment variable assignments,
+ but are supported on all platforms and are confined to
+ the configuration scripts only. These assignments override
+ the corresponding value in the inherited environment, if
+ there is one.
+
+ The following variables are used as "make variables" and
+ can be used as an alternative to giving preprocessor,
+ compiler and linker options directly as configuration.
+ The following variables are supported:
+
+ AR The static library archiver.
+ ARFLAGS Flags for the static library archiver.
+ AS The assembler compiler.
+ ASFLAGS Flags for the assembler compiler.
+ CC The C compiler.
+ CFLAGS Flags for the C compiler.
+ CXX The C++ compiler.
+ CXXFLAGS Flags for the C++ compiler.
+ CPP The C/C++ preprocessor.
+ CPPFLAGS Flags for the C/C++ preprocessor.
+ CPPDEFINES List of CPP macro definitions, separated
+ by a platform specific character (':' or
+ space for Unix, ';' for Windows, ',' for
+ VMS). This can be used in place of -D.
+ CPPINCLUDES List of CPP inclusion directories, separated
+ the same way as for CPPDEFINES. This can
+ be used in place of -I.
+ HASHBANGPERL Perl invocation to be inserted after '#!'
+ in public perl scripts.
+ LD The program linker (not used on Unix, $(CC)
+ is used there).
+ LDFLAGS Flags for the shared library, DSO and
+ program linker.
+ LDLIBS Extra libraries to use when linking.
+ Takes the form of a space separated list
+ of library specifications on Unix and
+ Windows, and as a comma separated list of
+ libraries on VMS.
+ RANLIB The library archive indexer.
+ RC The Windows resources manipulator.
+ RCFLAGS Flags for the Windows reources manipulator.
+ RM The command to remove files and directories.
+
+ These cannot be mixed with compiling / linking flags given
+ on the command line. In other words, something like this
+ isn't permitted.
+
+ ./config -DFOO CPPFLAGS=-DBAR -DCOOKIE
+
+ reconf
+ reconfigure
+ Reconfigure from earlier data. This fetches the previous
+ command line options and environment from data saved in
+ "configdata.pm", and runs the configuration process again,
+ using these options and environment.
+ Note: NO other option is permitted together with "reconf".
+ This means that you also MUST use "./Configure" (or
+ what corresponds to that on non-Unix platforms) directly
+ to invoke this option.
+ Note: The original configuration saves away values for ALL
+ environment variables that were used, and if they weren't
+ defined, they are still saved away with information that
+ they weren't originally defined. This information takes
+ precedence over environment variables that are defined
+ when reconfiguring.
+
+ Displaying configuration data
+ -----------------------------
+
+ The configuration script itself will say very little, and finishes by
+ creating "configdata.pm". This perl module can be loaded by other scripts
+ to find all the configuration data, and it can also be used as a script to
+ display all sorts of configuration data in a human readable form.
+
+ For more information, please do:
+
+ $ ./configdata.pm --help # Unix
- -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx
- These system specific options will be passed through to the
- compiler to allow you to define preprocessor symbols, specify
- additional libraries, library directories or other compiler
- options.
+ or
+ $ perl configdata.pm --help # Windows and VMS
Installation in Detail
----------------------
("openssl"). The libraries will be built in the top-level directory,
and the binary will be in the "apps" subdirectory.
- If the build fails, look at the output. There may be reasons for
- the failure that aren't problems in OpenSSL itself (like missing
- standard headers). If you are having problems you can get help by
- sending an email to the openssl-users email list (see
- https://www.openssl.org/community/mailinglists.html for details). If it
- is a bug with OpenSSL itself, please report the problem to
- <rt@openssl.org> (note that your message will be recorded in the request
- tracker publicly readable at
- https://www.openssl.org/community/index.html#bugs and will be
- forwarded to a public mailing list). Please check out the request
- tracker. Maybe the bug was already reported or has already been
- fixed.
+ Troubleshooting:
+
+ If the build fails, look at the output. There may be reasons
+ for the failure that aren't problems in OpenSSL itself (like
+ missing standard headers).
+
+ If the build succeeded previously, but fails after a source or
+ configuration change, it might be helpful to clean the build tree
+ before attempting another build. Use this command:
+
+ $ make clean # Unix
+ $ mms clean ! (or mmk) OpenVMS
+ $ nmake clean # Windows
- (If you encounter assembler error messages, try the "no-asm"
- configuration option as an immediate fix.)
+ Assembler error messages can sometimes be sidestepped by using the
+ "no-asm" configuration option.
Compiling parts of OpenSSL with gcc and others with the system
compiler will result in unresolved symbols on some systems.
+ If you are still having problems you can get help by sending an email
+ to the openssl-users email list (see
+ https://www.openssl.org/community/mailinglists.html for details). If
+ it is a bug with OpenSSL itself, please open an issue on GitHub, at
+ https://github.com/openssl/openssl/issues. Please review the existing
+ ones first; maybe the bug was already reported or has already been
+ fixed.
+
3. After a successful build, the libraries should be tested. Run:
$ make test # Unix
compiler optimization flags from the CFLAGS line in Makefile and
run "make clean; make" or corresponding.
- Please send bug reports to <rt@openssl.org>.
+ To report a bug please open an issue on GitHub, at
+ https://github.com/openssl/openssl/issues.
For more details on how the make variables TESTS can be used,
see section TESTS in Detail below.
possible to create your own ".conf" and ".tmpl" files and store
them locally, outside the OpenSSL source tree. This environment
variable can be set to the directory where these files are held
- and will have Configure to consider them in addition to the
- standard ones.
+ and will be considered by Configure before it looks in the
+ standard directories.
PERL
The name of the Perl executable to use when building OpenSSL.
+ This variable is used in config script only. Configure on the
+ other hand imposes the interpreter by which it itself was
+ executed on the whole build procedure.
HASHBANGPERL
The command string for the Perl executable to insert in the
uninstall
Uninstall all OpenSSL components.
+ reconfigure
+ reconf
+ Re-run the configuration process, as exactly as the last time
+ as possible.
+
update
This is a developer option. If you are developing a patch for
OpenSSL you may need to use this if you want to update
-xxx Removes 'xxx' from the current set of tests. If this is the
first token in the list, the current set of tests is first
assigned the whole set of available tests, effectively making
- this token equivalent to TESTS="alltests -xxx"
+ this token equivalent to TESTS="alltests -xxx".
+ nn Adds the test group 'nn' (which is a number) to the current
+ set of tests.
+ -nn Removes the test group 'nn' from the current set of tests.
+ If this is the first token in the list, the current set of
+ tests is first assigned the whole set of available tests,
+ effectively making this token equivalent to
+ TESTS="alltests -xxx".
Also, all tokens except for "alltests" may have wildcards, such as *.
(on Unix and Windows, BSD style wildcards are supported, while on VMS,
$ make TESTS='test_ssl* -test_ssl_*' test
+ Example: Only test group 10:
+
+ $ make TESTS='10'
+
+ Example: All tests except the slow group (group 99):
+
+ $ make TESTS='-99'
+
+ Example: All tests in test groups 80 to 99 except for tests in group 90:
+
+ $ make TESTS='[89]? -90'
+
Note on multi-threading
-----------------------
supported. If your platform does not provide pthreads or Windows threads then
you should Configure with the "no-threads" option.
- Note on shared libraries
- ------------------------
+ Notes on shared libraries
+ -------------------------
For most systems the OpenSSL Configure script knows what is needed to
build shared libraries for libcrypto and libssl. On these systems
where OpenSSL does not know how to build shared libraries the "no-shared"
option will be forced and only static libraries will be created.
+ Shared libraries are named a little differently on different platforms.
+ One way or another, they all have the major OpenSSL version number as
+ part of the file name, i.e. for OpenSSL 1.1.x, 1.1 is somehow part of
+ the name.
+
+ On most POSIXly platforms, shared libraries are named libcrypto.so.1.1
+ and libssl.so.1.1.
+
+ on Cygwin, shared libraries are named cygcrypto-1.1.dll and cygssl-1.1.dll
+ with import libraries libcrypto.dll.a and libssl.dll.a.
+
+ On Windows build with MSVC or using MingW, shared libraries are named
+ libcrypto-1_1.dll and libssl-1_1.dll for 32-bit Windows, libcrypto-1_1-x64.dll
+ and libssl-1_1-x64.dll for 64-bit x86_64 Windows, and libcrypto-1_1-ia64.dll
+ and libssl-1_1-ia64.dll for IA64 Windows. With MSVC, the import libraries
+ are named libcrypto.lib and libssl.lib, while with MingW, they are named
+ libcrypto.dll.a and libssl.dll.a.
+
+ On VMS, shareable images (VMS speak for shared libraries) are named
+ ossl$libcrypto0101_shr.exe and ossl$libssl0101_shr.exe. However, when
+ OpenSSL is specifically built for 32-bit pointers, the shareable images
+ are named ossl$libcrypto0101_shr32.exe and ossl$libssl0101_shr32.exe
+ instead, and when built for 64-bit pointers, they are named
+ ossl$libcrypto0101_shr64.exe and ossl$libssl0101_shr64.exe.
+
Note on random number generation
--------------------------------
projects / openssl.git / blobdiff