* NOTES.VMS (OpenVMS)
* NOTES.WIN (any supported Windows)
* NOTES.DJGPP (DOS platform with DJGPP)
+ * NOTES.ANDROID (obviously Android [NDK])
Notational conventions in this document
---------------------------------------
likely to complement configuration command line with
suitable compiler-specific option.
- enable-tls1_3
- TODO(TLS1.3): Make this enabled by default
- Build support for TLS1.3. Note: This is a WIP feature and
- only a single draft version is supported. Implementations
- of different draft versions will negotiate TLS 1.2 instead
- of (draft) TLS 1.3. Use with caution!!
-
no-<prot>
Don't build support for negotiating the specified SSL/TLS
- protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2, dtls,
- dtls1 or dtls1_2). If "no-tls" is selected then all of tls1,
- tls1_1 and tls1_2 are disabled. Similarly "no-dtls" will
- disable dtls1 and dtls1_2. The "no-ssl" option is synonymous
- with "no-ssl3". Note this only affects version negotiation.
- OpenSSL will still provide the methods for applications to
- explicitly select the individual protocol versions.
+ protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2,
+ tls1_3, dtls, dtls1 or dtls1_2). If "no-tls" is selected then
+ all of tls1, tls1_1, tls1_2 and tls1_3 are disabled.
+ Similarly "no-dtls" will disable dtls1 and dtls1_2. The
+ "no-ssl" option is synonymous with "no-ssl3". Note this only
+ affects version negotiation. OpenSSL will still provide the
+ methods for applications to explicitly select the individual
+ protocol versions.
no-<prot>-method
As for no-<prot> but in addition do not build the methods for
applications to explicitly select individual protocol
- versions.
+ versions. Note that there is no "no-tls1_3-method" option
+ because there is no application method for TLSv1.3. Using
+ individual protocol methods directly is deprecated.
+ Applications should use TLS_method() instead.
enable-<alg>
Build with support for the specified algorithm, where <alg>
no-<alg>
Build without support for the specified algorithm, where
- <alg> is one of: bf, blake2, camellia, cast, chacha, cmac,
- des, dh, dsa, ecdh, ecdsa, idea, md4, mdc2, ocb, poly1305,
- rc2, rc4, rmd160, scrypt, seed, siphash or whirlpool. The
- "ripemd" algorithm is deprecated and if used is synonymous
- with rmd160.
+ <alg> is one of: aria, bf, blake2, camellia, cast, chacha,
+ cmac, des, dh, dsa, ecdh, ecdsa, idea, md4, mdc2, ocb,
+ poly1305, rc2, rc4, rmd160, scrypt, seed, siphash, sm3, sm4
+ or whirlpool. The "ripemd" algorithm is deprecated and if
+ used is synonymous with rmd160.
- -Dxxx, lxxx, -Lxxx, -Wl, -rpath, -R, -framework, -static
+ -Dxxx, -Ixxx, -Wp, -lxxx, -Lxxx, -Wl, -rpath, -R, -framework, -static
These system specific options will be recognised and
passed through to the compiler to allow you to define
preprocessor symbols, specify additional libraries, library
unsuitable for execution on other, typically older,
processor. Consult your compiler documentation.
+ Take note of the VAR=value documentation below and how
+ these flags interact with those variables.
+
-xxx, +xxx
Additional options that are not otherwise recognised are
passed through as they are to the compiler as well. Again,
consult your compiler documentation.
+ Take note of the VAR=value documentation below and how
+ these flags interact with those variables.
+
+ VAR=value
+ Assignment of environment variable for Configure. These
+ work just like normal environment variable assignments,
+ but are supported on all platforms and are confined to
+ the configuration scripts only. These assignments override
+ the corresponding value in the inherited environment, if
+ there is one.
+
+ The following variables are used as "make variables" and
+ can be used as an alternative to giving preprocessor,
+ compiler and linker options directly as configuration.
+ The following variables are supported:
+
+ AR The static library archiver.
+ ARFLAGS Flags for the static library archiver.
+ AS The assembler compiler.
+ ASFLAGS Flags for the assembler compiler.
+ CC The C compiler.
+ CFLAGS Flags for the C compiler.
+ CXX The C++ compiler.
+ CXXFLAGS Flags for the C++ compiler.
+ CPP The C/C++ preprocessor.
+ CPPFLAGS Flags for the C/C++ preprocessor.
+ CPPDEFINES List of CPP macro definitions, separated
+ by a platform specific character (':' or
+ space for Unix, ';' for Windows, ',' for
+ VMS). This can be used instead of using
+ -D (or what corresponds to that on your
+ compiler) in CPPFLAGS.
+ CPPINCLUDES List of CPP inclusion directories, separated
+ the same way as for CPPDEFINES. This can
+ be used instead of -I (or what corresponds
+ to that on your compiler) in CPPFLAGS.
+ HASHBANGPERL Perl invocation to be inserted after '#!'
+ in public perl scripts (only relevant on
+ Unix).
+ LD The program linker (not used on Unix, $(CC)
+ is used there).
+ LDFLAGS Flags for the shared library, DSO and
+ program linker.
+ LDLIBS Extra libraries to use when linking.
+ Takes the form of a space separated list
+ of library specifications on Unix and
+ Windows, and as a comma separated list of
+ libraries on VMS.
+ RANLIB The library archive indexer.
+ RC The Windows resources manipulator.
+ RCFLAGS Flags for the Windows reources manipulator.
+ RM The command to remove files and directories.
+
+ These cannot be mixed with compiling / linking flags given
+ on the command line. In other words, something like this
+ isn't permitted.
+
+ ./config -DFOO CPPFLAGS=-DBAR -DCOOKIE
+
+ Backward compatibility note:
+
+ To be compatible with older configuration scripts, the
+ environment variables are ignored if compiling / linking
+ flags are given on the command line, except for these:
+
+ AR, CC, CXX, CROSS_COMPILE, HASHBANGPERL, PERL, RANLIB, RC
+ and WINDRES
+
+ For example, the following command will not see -DBAR:
+
+ CPPFLAGS=-DBAR ./config -DCOOKIE
+
+ However, the following will see both set variables:
+
+ CC=gcc CROSS_COMPILE=x86_64-w64-mingw32- \
+ ./config -DCOOKIE
+
+ reconf
+ reconfigure
+ Reconfigure from earlier data. This fetches the previous
+ command line options and environment from data saved in
+ "configdata.pm", and runs the configuration process again,
+ using these options and environment.
+ Note: NO other option is permitted together with "reconf".
+ This means that you also MUST use "./Configure" (or
+ what corresponds to that on non-Unix platforms) directly
+ to invoke this option.
+ Note: The original configuration saves away values for ALL
+ environment variables that were used, and if they weren't
+ defined, they are still saved away with information that
+ they weren't originally defined. This information takes
+ precedence over environment variables that are defined
+ when reconfiguring.
+
+ Displaying configuration data
+ -----------------------------
+
+ The configuration script itself will say very little, and finishes by
+ creating "configdata.pm". This perl module can be loaded by other scripts
+ to find all the configuration data, and it can also be used as a script to
+ display all sorts of configuration data in a human readable form.
+
+ For more information, please do:
+
+ $ ./configdata.pm --help # Unix
+
+ or
+
+ $ perl configdata.pm --help # Windows and VMS
Installation in Detail
----------------------
("openssl"). The libraries will be built in the top-level directory,
and the binary will be in the "apps" subdirectory.
+ Troubleshooting:
+
If the build fails, look at the output. There may be reasons
for the failure that aren't problems in OpenSSL itself (like
- missing standard headers). If you are having problems you can
- get help by sending an email to the openssl-users email list (see
+ missing standard headers).
+
+ If the build succeeded previously, but fails after a source or
+ configuration change, it might be helpful to clean the build tree
+ before attempting another build. Use this command:
+
+ $ make clean # Unix
+ $ mms clean ! (or mmk) OpenVMS
+ $ nmake clean # Windows
+
+ Assembler error messages can sometimes be sidestepped by using the
+ "no-asm" configuration option.
+
+ Compiling parts of OpenSSL with gcc and others with the system
+ compiler will result in unresolved symbols on some systems.
+
+ If you are still having problems you can get help by sending an email
+ to the openssl-users email list (see
https://www.openssl.org/community/mailinglists.html for details). If
it is a bug with OpenSSL itself, please open an issue on GitHub, at
https://github.com/openssl/openssl/issues. Please review the existing
ones first; maybe the bug was already reported or has already been
fixed.
- (If you encounter assembler error messages, try the "no-asm"
- configuration option as an immediate fix.)
-
- Compiling parts of OpenSSL with gcc and others with the system
- compiler will result in unresolved symbols on some systems.
-
3. After a successful build, the libraries should be tested. Run:
$ make test # Unix
compiler optimization flags from the CFLAGS line in Makefile and
run "make clean; make" or corresponding.
- Please send bug reports to <rt@openssl.org>.
+ To report a bug please open an issue on GitHub, at
+ https://github.com/openssl/openssl/issues.
For more details on how the make variables TESTS can be used,
see section TESTS in Detail below.
uninstall
Uninstall all OpenSSL components.
+ reconfigure
+ reconf
+ Re-run the configuration process, as exactly as the last time
+ as possible.
+
update
This is a developer option. If you are developing a patch for
OpenSSL you may need to use this if you want to update
projects / openssl.git / blobdiff