- [Notes on multi-threading](#notes-on-multi-threading)
- [Notes on shared libraries](#notes-on-shared-libraries)
- [Notes on random number generation](#notes-on-random-number-generation)
+ - [Notes on assembler modules compilation](#notes-on-assembler-modules-compilation)
Prerequisites
=============
To install OpenSSL, you will need:
* A "make" implementation
- * Perl 5 with core modules (please read [NOTES-Perl.md](NOTES-Perl.md))
- * The Perl module `Text::Template` (please read [NOTES-PERL.md](NOTES-Perl.md))
+ * Perl 5 with core modules (please read [NOTES-PERL.md](NOTES-PERL.md))
+ * The Perl module `Text::Template` (please read [NOTES-PERL.md](NOTES-PERL.md))
* an ANSI C compiler
* a development environment in the form of development libraries and C
header files
For additional platform specific requirements, solutions to specific
issues and other details, please read one of these:
- * [NOTES-Unix.md](NOTES-Unix.md) - notes for Unix like systems
- * [NOTES-VMS.md](NOTES-VMS.md) - notes related to OpenVMS
- * [NOTES-Windows.txt](NOTES-Windows.txt) - notes related to the Windows platform
- * [NOTES-DJGPP.md](NOTES-DJGPP.md) - building for DOS with DJGPP
- * [NOTES-Android.md](NOTES-Android.md) - building for Android platforms (using NDK)
- * [NOTES-Valgrind.md](NOTES-Valgrind.md) - testing with Valgrind
- * [NOTES-Perl.m](NOTES-Perl.md) - some notes on Perl
+ * [Notes for UNIX-like platforms](NOTES-UNIX.md)
+ * [Notes for Android platforms](NOTES-ANDROID.md)
+ * [Notes for Windows platforms](NOTES-WINDOWS.md)
+ * [Notes for the DOS platform with DJGPP](NOTES-DJGPP.md)
+ * [Notes for the OpenVMS platform](NOTES-VMS.md)
+ * [Notes on Perl](NOTES-PERL.md)
+ * [Notes on Valgrind](NOTES-VALGRIND.md)
Notational conventions
======================
If you just want to get OpenSSL installed without bothering too much
about the details, here is the short version of how to build and install
OpenSSL. If any of the following steps fails, please consult the
-[Installation in Detail](#installation-in-detail) section below.
+[Installation in Detail](#installation-steps-in-detail) section below.
Building OpenSSL
----------------
By default, OpenSSL will be installed to
- SYS$COMMON:[OPENSSL-'version'...]
-
-where 'version' is the OpenSSL version number with underscores instead
-of periods.
+ SYS$COMMON:[OPENSSL]
### Windows
directory for testing purposes) run `Configure` as shown in the following
examples.
+The options `--prefix` and `--openssldir` are explained in further detail in
+[Directories](#directories) below, and the values used here are mere examples.
+
On Unix:
$ ./Configure --prefix=/opt/openssl --openssldir=/usr/local/ssl
There are several options to `./Configure` to customize the build (note that
for Windows, the defaults for `--prefix` and `--openssldir` depend on what
configuration is used and what Windows implementation OpenSSL is built on.
-More notes on this in [NOTES-Windows.txt](NOTES-Windows.txt):
+For more information, see the [Notes for Windows platforms](NOTES-WINDOWS.md).
API Level
---------
Build the OpenSSL libraries to support the API for the specified version.
If [no-deprecated](#no-deprecated) is also given, don't build with support
for deprecated APIs in or below the specified version number. For example,
-addding
+adding
--api=1.1.0 no-deprecated
The name of the directory under the top of the installation directory tree
(see the `--prefix` option) where libraries will be installed. By default
-this is `lib/`. Note that on Windows only static libraries (`*.lib`) will
+this is `lib`. Note that on Windows only static libraries (`*.lib`) will
be stored in this location. Shared libraries (`*.dll`) will always be
-installed to the `bin/` directory.
+installed to the `bin` directory.
+
+Some build targets have a multilib postfix set in the build configuration.
+For these targets the default libdir is `lib<multilib-postfix>`. Please use
+`--libdir=lib` to override the libdir if adding the postfix is undesirable.
### openssldir
Unix: /usr/local
Windows: C:\Program Files\OpenSSL
- OpenVMS: SYS$COMMON:[OPENSSL-'version']
+ OpenVMS: SYS$COMMON:[OPENSSL]
Compiler Warnings
-----------------
--with-zlib-include=DIR
The directory for the location of the zlib include file. This option is only
-necessary if [enable-zlib](#enable-zlib) is used and the include file is not
+necessary if [zlib](#zlib) is used and the include file is not
already on the system include path.
### with-zlib-lib
gcc or clang and should be used in conjunction with the [no-shared](#no-shared)
option.
-### no-acvp_tests
+### enable-acvp-tests
-Do not build support for Automated Cryptographic Validation Protocol (ACVP)
+Build support for Automated Cryptographic Validation Protocol (ACVP)
tests.
This is required for FIPS validation purposes. Certain ACVP tests require
the C++ compiler. If not, the C++ build test will most likely break. As an
alternative, you can use the language specific variables, `CFLAGS` and `CXXFLAGS`.
+### --banner=text
+
+Use the specified text instead of the default banner at the end of
+configuration.
+
+### --w
+
+On platforms where the choice of 32-bit or 64-bit architecture
+is not explicitly specified, `Configure` will print a warning
+message and wait for a few seconds to let you interrupt the
+configuration. Using this flag skips the wait.
+
+### no-bulk
+
+Build only some minimal set of features.
+This is a developer option used internally for CI build tests of the project.
+
+### no-cached-fetch
+
+Never cache algorithms when they are fetched from a provider. Normally, a
+provider indicates if the algorithms it supplies can be cached or not. Using
+this option will reduce run-time memory usage but it also introduces a
+significant performance penalty. This option is primarily designed to help
+with detecting incorrect reference counting.
+
### no-capieng
Don't build the CAPI engine.
This is a developer option and may not work on all platforms. The following
external test suites are currently supported:
- - BoringSSL test suite
+ - GOST engine test suite
- Python PYCA/Cryptography test suite
- krb5 test suite
Don't compile in filename and line number information (e.g. for errors and
memory allocation).
-### no-fips
+### enable-fips
-Don't compile the FIPS provider
+Build (and install) the FIPS provider
+
+### no-fips-securitychecks
+
+Don't perform FIPS module run-time checks related to enforcement of security
+parameters such as minimum security strength of keys.
### enable-fuzz-libfuzzer, enable-fuzz-afl
"audience" running such kernel, consider `no-sse2`. Both the `386` and `no-asm`
options imply `no-sse2`.
-### enable-ssl-trace
+### no-ssl-trace
+
+Don't build with SSL Trace capabilities.
-Build with the SSL Trace capabilities.
+This removes the `-trace` option from `s_client` and `s_server`, and omits the
+`SSL_trace()` function from libssl.
-This adds the `-trace` option to `s_client` and `s_server`.
+Disabling `ssl-trace` may provide a small reduction in libssl binary size.
### no-static-engine
### Automatic Configuration
-On some platform a `config` script is available which attempts to guess
-your operating system (and compiler, if necessary) and calls the `Configure`
-Perl script with appropriate target based on its guess. Further options can
-be supplied to the `config` script, which will be passed on to the `Configure`
-script.
+In previous version, the `config` script determined the platform type and
+compiler and then called `Configure`. Starting with this release, they are
+the same.
#### Unix / Linux / macOS
### OpenVMS
-'arch' is replaced with the architecture name, `Alpha` or `ia64`,
+'arch' is replaced with the architecture name, `ALPHA` or `IA64`,
'sover' is replaced with the shared library version (`0101` for 1.1), and
'pz' is replaced with the pointer size OpenSSL was built with:
"--cross-compile-prefix" Configure flag described above. If both
are set then the Configure flag takes precedence.
+ HASHBANGPERL
+ The command string for the Perl executable to insert in the
+ #! line of perl scripts that will be publicly installed.
+ Default: /usr/bin/env perl
+ Note: the value of this variable is added to the same scripts
+ on all platforms, but it's only relevant on Unix-like platforms.
+
+ KERNEL_BITS
+ This can be the value `32` or `64` to specify the architecture
+ when it is not "obvious" to the configuration. It should generally
+ not be necessary to specify this environment variable.
+
NM
The name of the nm executable to use.
Only needed if builing should use a different Perl executable
than what is used to run the Configure script.
- HASHBANGPERL
- The command string for the Perl executable to insert in the
- #! line of perl scripts that will be publicly installed.
- Default: /usr/bin/env perl
- Note: the value of this variable is added to the same scripts
- on all platforms, but it's only relevant on Unix-like platforms.
+ RANLIB
+ The name of the ranlib executable to use.
RC
The name of the rc executable to use. The default will be as
variable is synonymous to this. If both are defined then RC
takes precedence.
- RANLIB
- The name of the ranlib executable to use.
-
WINDRES
See RC.
install_html_docs
Only install the OpenSSL HTML documentation.
+ install_fips
+ Install the FIPS provider module configuration file.
+
list-tests
Prints a list of all the self test names.
possibly after some adjustment.
The `Configurations/` directory contains a lot of examples of such targets.
-The main configuration file is [10-main.conf][], which contains all targets that
+The main configuration file is [10-main.conf], which contains all targets that
are officially supported by the OpenSSL team. Other configuration files contain
targets contributed by other OpenSSL users. The list of targets can be found in
a Perl list `my %targets = ( ... )`.
- [Configurations/README.md](Configurations/README.md)
- [Configurations/README-design.md](Configurations/README-design.md)
-If you need further help, try to search the [openssl-users][] mailing list
-or the [GitHub Issues][] for existing solutions. If you don't find anything,
-you can [raise an issue][] to ask a question yourself.
+If you need further help, try to search the [openssl-users] mailing list
+or the [GitHub Issues] for existing solutions. If you don't find anything,
+you can [raise an issue] to ask a question yourself.
-More about our support resources can be found in the [SUPPORT][] file.
+More about our support resources can be found in the [SUPPORT] file.
### Configuration Errors
read the error message carefully and try to figure out whether you made
a mistake (e.g., by providing a wrong option), or whether the script is
working incorrectly. If you think you encountered a bug, please
-[raise an issue][] on GitHub to file a bug report.
+[raise an issue] on GitHub to file a bug report.
Along with a short description of the bug, please provide the complete
configure command line and the relevant output including the error message.
$ mms clean ! (or mmk) OpenVMS
$ nmake clean # Windows
-Assembler error messages can sometimes be sidestepped by using the
-`no-asm` configuration option.
+Assembler error messages can sometimes be sidestepped by using the `no-asm`
+configuration option. See also [notes](#notes-on-assembler-modules-compilation).
Compiling parts of OpenSSL with gcc and others with the system compiler will
result in unresolved symbols on some systems.
-If you are still having problems, try to search the [openssl-users][] mailing
-list or the [GitHub Issues][] for existing solutions. If you think you
-encountered an OpenSSL bug, please [raise an issue][] to file a bug report.
+If you are still having problems, try to search the [openssl-users] mailing
+list or the [GitHub Issues] for existing solutions. If you think you
+encountered an OpenSSL bug, please [raise an issue] to file a bug report.
Please take the time to review the existing issues first; maybe the bug was
already reported or has already been fixed.
supported. If your platform does not provide pthreads or Windows threads then
you should use `Configure` with the `no-threads` option.
+For pthreads, all locks are non-recursive. In addition, in a debug build,
+the mutex attribute `PTHREAD_MUTEX_ERRORCHECK` is used. If this is not
+available on your platform, you might have to add
+`-DOPENSSL_NO_MUTEX_ERRORCHECK` to your `Configure` invocation.
+(On Linux `PTHREAD_MUTEX_ERRORCHECK` is an enum value, so a built-in
+ifdef test cannot be used.)
+
Notes on shared libraries
-------------------------
the CSPRNG manually. Please check out the manual pages for `RAND_add()`,
`RAND_bytes()`, `RAND_egd()`, and the FAQ for more information.
+Notes on assembler modules compilation
+--------------------------------------
+
+Compilation of some code paths in assembler modules might depend on whether the
+current assembler version supports certain ISA extensions or not. Code paths
+that use the AES-NI, PCLMULQDQ, SSSE3, and SHA extensions are always assembled.
+Apart from that, the minimum requirements for the assembler versions are shown
+in the table below:
+
+| ISA extension | GNU as | nasm | llvm |
+|---------------|--------|--------|---------|
+| AVX | 2.19 | 2.09 | 3.0 |
+| AVX2 | 2.22 | 2.10 | 3.1 |
+| ADCX/ADOX | 2.23 | 2.10 | 3.3 |
+| AVX512 | 2.25 | 2.11.8 | 3.6 (*) |
+| AVX512IFMA | 2.26 | 2.11.8 | 6.0 (*) |
+| VAES | 2.30 | 2.13.3 | 6.0 (*) |
+
+---
+
+(*) Even though AVX512 support was implemented in llvm 3.6, prior to version 7.0
+an explicit -march flag was apparently required to compile assembly modules. But
+then the compiler generates processor-specific code, which in turn contradicts
+the idea of performing dispatch at run-time, which is facilitated by the special
+variable `OPENSSL_ia32cap`. For versions older than 7.0, it is possible to work
+around the problem by forcing the build procedure to use the following script:
+
+ #!/bin/sh
+ exec clang -no-integrated-as "$@"
+
+instead of the real clang. In which case it doesn't matter what clang version
+is used, as it is the version of the GNU assembler that will be checked.
+
+---
+
<!-- Links -->
[openssl-users]: