# -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
# So the md5_locl.h file has an undef B_ENDIAN if sun is defined
-#config-string CC : CFLAGS : LDFLAGS : special header file mods:bn_asm \
-# des_asm:bf_asm
+#config-string $cc : $cflags : $unistd : $thread_cflag : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj
+
my %table=(
#"b", "$tcc:$tflags::$tlib:$bits1:$tbn_mul::",
#"bl-4c-2c", "$tcc:$tflags::$tlib:${bits1}BN_LLONG RC4_CHAR MD2_CHAR:$tbn_mul::",
# Our development configs
"purify", "purify gcc:-g -DPURIFY -Wall::(unknown):-lsocket -lnsl::::",
-"debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown):-lefence::::",
-"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DPEDANTIC -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::",
-"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::",
-"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::",
+"debug", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown):-lefence::::",
+"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::",
+"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::",
+"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::",
"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-"debug-ulf", "gcc:-DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -Wall -pedantic -Wall -Wshadow -pipe::-D_REENTRANT::$x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-ulf", "gcc:-DL_ENDIAN -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::$x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-steve", "gcc:-DL_ENDIAN -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -pedantic -Wall -Wshadow -pipe::-D_REENTRANT::$x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-levitte-linux-elf","gcc:-DRL_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -pipe::-D_REENTRANT:::",
"dist", "cc:-O::(unknown):::::",
-# Basic configs that should work on any box
+# Basic configs that should work on any (32 and less bit) box
"gcc", "gcc:-O3::(unknown)::BN_LLONG:::",
"cc", "cc:-O::(unknown):::::",
#### Solaris x86 setups
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
+# -DNO_INLINE_ASM switches off inline assembler. We have to do it
+# here because whenever GNU C instantiates an assembler template it
+# surrounds it with #APP #NO_APP comment pair which (at least Solaris
+# 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
+# error message.
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
#### SPARC Solaris with GNU C setups
"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
# but keep the assembler modules.
"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:",
####
-"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
+"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
#### SPARC Solaris with Sun C setups
# DO NOT use /xO[34] on sparc with SC3.0. It is broken, and will not pass the tests
"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
####
-"debug-solaris-sparcv8-cc","cc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"debug-solaris-sparcv9-cc","cc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"debug-solaris-sparcv8-cc","cc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"debug-solaris-sparcv9-cc","cc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
#### SPARC Linux setups
"linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+#### Unified HP-UX ANSI C configs.
+# Special notes:
+# - Originally we were optimizing at +O4 level. It should be noted
+# that the only difference between +O3 and +O4 is global inter-
+# procedural analysis. As it has to be performed during the link
+# stage the compiler leaves behind certain pseudo-code in lib*.a
+# which might be release or even patch level specific. Generating
+# the machine code for and analyzing the *whole* program appears
+# to be *extremely* memory demanding while the performance gain is
+# actually questionable. The situation is intensified by the default
+# HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB
+# which is way too low for +O4. In other words, doesn't +O3 make
+# more sense?
+# - Keep in mind that the HP compiler by default generates code
+# suitable for execution on the host you're currently compiling at.
+# If the toolkit is ment to be used on various PA-RISC processors
+# consider './config +Dportable'.
+# - +DD64 is chosen in favour of +DA2.0W because it's ment to be
+# compatible with *future* releases.
+# - If you run ./Configure hpux-parisc-[g]cc manually don't forget to
+# pass -D_REENTRANT on HP-UX 10 and later.
+# - -DMD32_XARRAY triggers workaround for compiler bug we ran into in
+# 32-bit message digests. (For the moment of this writing) HP C
+# doesn't seem to "digest" too many local variables (they make "him"
+# chew forever:-). For more details look-up MD32_XARRAY comment in
+# crypto/sha/sha_lcl.h.
+# <appro@fy.chalmers.se>
+#
+"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:::",
+
# HPUX 9.X config.
# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or
# egcs. gcc 2.8.1 is also broken.
-"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
# If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
# please report your OS and compiler version to the openssl-bugs@openssl.org
# mailing list.
"hpux-brokengcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
# HPUX 10.X config. Supports threads.
-"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
# If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG):
"hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
# HPUX 11.X from www.globus.org.
# Only works on PA-RISC 2.0 cpus, and not optimized. Why?
-"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
-"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
+#"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
+#"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
+# Use unified settings above instead.
# Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with
# the new compiler
# For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version
-"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:::",
-"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:::",
-"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:::",
+"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o::",
+"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o::",
+"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o::",
"FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::",
+#### Alpha Linux with GNU C and Compaq C setups
+# Special notes:
+# - linux-alpha+bwx-gcc is ment to be used from ./config only. If you
+# ought to run './Configure linux-alpha+bwx-gcc' manually, do
+# complement the command line with -mcpu=ev56, -mcpu=ev6 or whatever
+# which is appropriate.
+# - If you use ccc keep in mind that -fast implies -arch host and the
+# compiler is free to issue instructions which gonna make elder CPU
+# choke. If you wish to build "blended" toolkit, add -arch generic
+# *after* -fast and invoke './Configure linux-alpha-ccc' manually.
+#
+# <appro@fy.chalmers.se>
+#
+"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::",
+"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::",
+"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::",
+"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::",
+
# assembler versions -- currently defunct:
-##"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::",
-##"alpha-cc", "cc:-tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
-##"alpha164-cc", "cc:-tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::",
# The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
# bn86-elf.o file file since it is hand tweaked assembler.
"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-"debug-linux-elf","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-linux-elf","gcc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
"linux-mips", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::",
"linux-ppc", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::::",
"SINIX-N","/usr/ucb/cc:-O2 -misaligned::(unknown):-lucb:RC4_INDEX RC4_CHAR:::",
# SIEMENS BS2000/OSD: an EBCDIC-based mainframe
-"BS2000-OSD","c89:-XLLML -XLLMK -XL -DB_ENDIAN -DTERMIOS -DCHARSET_EBCDIC::(unknown):-lsocket -lnsl:THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::",
+"BS2000-OSD","c89:-O -XLLML -XLLMK -XL -DB_ENDIAN -DTERMIOS -DCHARSET_EBCDIC::(unknown):-lsocket -lnsl:THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::",
# Windows NT, Microsoft Visual C++ 4.0
"OpenBSD", "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::",
"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::",
+##### MacOS X (a.k.a. Rhapsody) setup
+"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+
);
my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
$depflags .= "-DNO_$algo ";
if ($algo eq "DES")
{
+ push @skip, "mdc2";
$options .= " no-mdc2";
$flags .= "-DNO_MDC2 ";
$depflags .= "-DNO_MDC2 ";
open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n";
open(OUT,">$Makefile") || die "unable to create $Makefile:$!\n";
+print OUT "### Generated automatically from Makefile.org by Configure.\n\n";
my $sdirs=0;
while (<IN>)
{
open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h.in:$!\n";
open(OUT,'>crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n";
+print OUT "/* Generated automatically from opensslconf.h.in by Configure. */\n\n";
while (<IN>)
{
if (/^#define\s+OPENSSLDIR/)
&dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',);
if ( $perl =~ m@^/@) {
&dofile("apps/der_chop",$perl,'^#!/', '#!%s');
+ &dofile("apps/CA.pl",$perl,'^#!/', '#!%s');
} else {
# No path for Perl known ...
&dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
+ &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
}
}
print <<EOF;
+Configured for $target.
+
NOTE: OpenSSL header files were moved from <*.h> to <openssl/*.h>;
see file INSTALL for hints on coping with compatibility problems.
EOF
projects / openssl.git / blobdiff