use File::Basename;
use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
use File::Path qw/mkpath/;
+use if $^O ne "VMS", 'File::Glob' => qw/glob/;
# see INSTALL for instructions.
# Collect target configurations
my $pattern = catfile(dirname($0), "Configurations", "*.conf");
-foreach (sort glob($pattern) ) {
+foreach (sort glob($pattern)) {
&read_config($_);
}
$pattern = catfile($ENV{$local_config_envname}, '*.conf');
}
- foreach (sort glob($pattern) ) {
+ foreach (sort glob($pattern)) {
&read_config($_);
}
}
my @disablables = (
"afalgeng",
+ "asan",
"asm",
"async",
"autoalginit",
"engine",
"err",
"filenames",
+ "fuzz-libfuzzer",
+ "fuzz-afl",
"gost",
"heartbeats",
"hw(-.+)?",
"threads",
"tls",
"ts",
+ "ubsan",
"ui",
"unit-test",
"whirlpool",
my @deprecated_disablables = (
"ssl2",
+ "buf-freelists",
);
# All of the following is disabled by default (RC5 was enabled before 0.9.8):
our %disabled = ( # "what" => "comment"
+ "asan" => "default",
"ec_nistp_64_gcc_128" => "default",
"egd" => "default",
+ "fuzz-libfuzzer" => "default",
+ "fuzz-afl" => "default",
"md2" => "default",
"rc5" => "default",
"sctp" => "default",
"ssl-trace" => "default",
"ssl3" => "default",
"ssl3-method" => "default",
+ "ubsan" => "default",
"unit-test" => "default",
"weak-ssl-ciphers" => "default",
"zlib" => "default",
"zlib-dynamic" => "default",
"crypto-mdebug" => "default",
+ "crypto-mdebug-backtrace" => "default",
"heartbeats" => "default",
);
{
$withargs{zlib_include}=$1;
}
+ elsif (/^--with-fuzzer-lib=(.*)$/)
+ {
+ $withargs{fuzzer_lib}=$1;
+ }
+ elsif (/^--with-fuzzer-include=(.*)$/)
+ {
+ $withargs{fuzzer_include}=$1;
+ }
elsif (/^--with-fipslibdir=(.*)$/)
{
$config{fipslibdir}="$1/";
# Allow overriding the names of some tools. USE WITH CARE
$config{perl} = $ENV{'PERL'} || ($^O ne "VMS" ? $^X : "perl");
$target{cc} = $ENV{'CC'} || $target{cc} || "cc";
-$target{ranlib} = $ENV{'RANLIB'} || $target{ranlib} || which("ranlib") || "true";
+$target{ranlib} = $ENV{'RANLIB'} || $target{ranlib} ||
+ (which("$config{cross_compile_prefix}ranlib") ?
+ "\$(CROSS_COMPILE)ranlib" : "true");
$target{ar} = $ENV{'AR'} || $target{ar} || "ar";
$target{nm} = $ENV{'NM'} || $target{nm} || "nm";
+$target{rc} =
+ $ENV{'RC'} || $ENV{'WINDRES'} || $target{rc} || "windres";
# For cflags, lflags, plib_lflags, ex_libs and defines, add the debug_
# or release_ attributes.
$config{dynamic_engines} = 1;
}
+unless ($disabled{"fuzz-libfuzzer"}) {
+ push @{$config{dirs}}, "fuzz";
+ $config{cflags} .= "-fsanitize-coverage=edge,indirect-calls ";
+}
+
+unless ($disabled{"fuzz-afl"}) {
+ push @{$config{dirs}}, "fuzz";
+}
+
+unless ($disabled{asan}) {
+ $config{cflags} .= "-fsanitize=address ";
+}
+
+unless ($disabled{ubsan}) {
+ # -DPEDANTIC or -fnosanitize=aligmnent may also be required on some
+ # platforms.
+ $config{cflags} .= "-fsanitize=undefined -fno-sanitize-recover=all ";
+}
+
+unless ($disabled{"fuzz-libfuzzer"} && $disabled{"fuzz-afl"}
+ && $disabled{asan} && $disabled{ubsan}) {
+ $config{cflags} .= "-fno-omit-frame-pointer -g ";
+}
#
# Platform fix-ups
#
if ($builder eq "unified") {
# Store the name of the template file we will build the build file from
# in %config. This may be useful for the build file itself.
- my $build_file_template =
- catfile($srcdir, "Configurations",
- $builder_platform."-".$target{build_file}.".tmpl");
- $build_file_template =
- catfile($srcdir, "Configurations", $target{build_file}.".tmpl")
- if (! -f $build_file_template);
+ my $build_file_template;
+
+ for my $filename (( $builder_platform."-".$target{build_file}.".tmpl",
+ $target{build_file}.".tmpl" )) {
+ if (defined $ENV{$local_config_envname}) {
+ if ($^O eq 'VMS') {
+ # VMS environment variables are logical names,
+ # which can be used as is
+ $build_file_template = $local_config_envname . ':' . $filename;
+ } else {
+ $build_file_template = catfile($ENV{$local_config_envname},
+ $filename);
+ }
+ }
+
+ last if -f $build_file_template;
+
+ $build_file_template = catfile($srcdir, "Configurations", $filename);
+
+ last if -f $build_file_template;
+ }
$config{build_file_template} = $build_file_template;
use lib catdir(dirname(__FILE__),"util");
$template->fill_in(HASH => { config => \%config,
target => \%target,
disabled => \%disabled,
+ withargs => \%withargs,
builddir => abs2rel($buildd, $blddir),
sourcedir => abs2rel($sourced, $blddir),
buildtop => abs2rel($blddir, $blddir),
=> sub { die "ENDIF out of scope" if ! @skip;
pop @skip; },
qr/^\s*PROGRAMS\s*=\s*(.*)\s*$/
- => sub { push @programs, split(/\s+/, $1)
+ => sub { push @programs, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*LIBS\s*=\s*(.*)\s*$/
- => sub { push @libraries, split(/\s+/, $1)
+ => sub { push @libraries, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*ENGINES\s*=\s*(.*)\s*$/
- => sub { push @engines, split(/\s+/, $1)
+ => sub { push @engines, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SCRIPTS\s*=\s*(.*)\s*$/
- => sub { push @scripts, split(/\s+/, $1)
+ => sub { push @scripts, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*EXTRA\s*=\s*(.*)\s*$/
- => sub { push @extra, split(/\s+/, $1)
+ => sub { push @extra, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*OVERRIDES\s*=\s*(.*)\s*$/
- => sub { push @overrides, split(/\s+/, $1)
+ => sub { push @overrides, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*ORDINALS\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/,
- => sub { push @{$ordinals{$1}}, split(/\s+/, $2)
+ => sub { push @{$ordinals{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SOURCE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$sources{$1}}, split(/\s+/, $2)
+ => sub { push @{$sources{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SHARED_SOURCE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$shared_sources{$1}}, split(/\s+/, $2)
+ => sub { push @{$shared_sources{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*INCLUDE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$includes{$1}}, split(/\s+/, $2)
+ => sub { push @{$includes{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*DEPEND\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$depends{$1}}, split(/\s+/, $2)
+ => sub { push @{$depends{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*GENERATE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
=> sub { push @{$generate{$1}}, $2
if !@skip || $skip[$#skip] > 0 },
qr/^\s*RENAME\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$renames{$1}}, split(/\s+/, $2)
+ => sub { push @{$renames{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SHARED_NAME\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$sharednames{$1}}, split(/\s+/, $2)
+ => sub { push @{$sharednames{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*BEGINRAW\[((?:\\.|[^\\\]])+)\]\s*$/
=> sub {
close(OUT);
-print "CC =$target{cc}\n";
+print "CC =$config{cross_compile_prefix}$target{cc}\n";
print "CFLAG =$target{cflags} $config{cflags}\n";
print "SHARED_CFLAG =$target{shared_cflag}\n";
print "DEFINES =",join(" ", @{$target{defines}}, @{$config{defines}}),"\n";
print "POLY1305_OBJ =$target{poly1305_obj}\n";
print "BLAKE2_OBJ =$target{blake2_obj}\n";
print "PROCESSOR =$config{processor}\n";
-print "RANLIB =$target{ranlib}\n";
+print "RANLIB =", $target{ranlib} eq '$(CROSS_COMPILE)ranlib' ?
+ "$config{cross_compile_prefix}ranlib" :
+ "$target{ranlib}", "\n";
print "ARFLAGS =$target{arflags}\n";
print "PERL =$config{perl}\n";
print "\n";
catfile($srcdir, $_.".in"));
}
-###
-### When the old "unixmake" scheme goes away, so does this function
-###
-sub build_Makefile {
- run_dofile("Makefile","Makefile.in");
-
- # Copy all Makefile.in to Makefile (except top-level)
- use File::Find;
- use IO::File;
- find(
- {
- preprocess => sub {
- grep(!/^\./, @_);
- },
- wanted => sub {
- return if ($_ ne "Makefile.in" || $File::Find::dir eq ".");
- my $in = IO::File->new($_, "r") or
- die sprintf "Error reading Makefile.in in %s: !$\n",
- $File::Find::dir;
- my $out = IO::File->new("Makefile", "w") or
- die sprintf "Error writing Makefile in %s: !$\n",
- $File::Find::dir;
- print $out "# Generated from $_, do not edit\n";
- while (my $line = <$in>) { print $out $line }
- $in->close() or
- die sprintf "Error reading Makefile.in in %s: !$\n",
- $File::Find::dir;
- $out->close() or
- die sprintf "Error writing Makefile in %s: !$\n",
- $File::Find::dir;
- },
- },
- ".");
-}
-
my %builders = (
unified => sub {
run_dofile(catfile($blddir, $target{build_file}),
$config{build_file_template},
catfile($srcdir, "Configurations", "common.tmpl"));
},
- unixmake => sub {
- build_Makefile();
-
- run_dofile("util/domd", "util/domd.in");
- chmod 0755, "util/domd";
- },
);
$builders{$builder}->($builder_platform, @builder_opts);
foreach (@templates) {
die "Can't open $_, $!" unless -f $_;
}
- my $cmd = "$config{perl} \"-I.\" \"-Mconfigdata\" $dofile -o\"Configure\" \"".join("\" \"",@templates)."\" > \"$out.new\"";
+ my $cmd = "$config{perl} \"-I.\" \"-Mconfigdata\" \"$dofile\" -o\"Configure\" \"".join("\" \"",@templates)."\" > \"$out.new\"";
#print STDERR "DEBUG[run_dofile]: \$cmd = $cmd\n";
system($cmd);
exit 1 if $? != 0;
rename("$out.new", $out) || die "Can't rename $out.new, $!";
}
+sub which
+{
+ my ($name)=@_;
+
+ if (eval { require IPC::Cmd; 1; }) {
+ IPC::Cmd->import();
+ return scalar IPC::Cmd::can_run($name);
+ } else {
+ # if there is $directories component in splitpath,
+ # then it's not something to test with $PATH...
+ return $name if (File::Spec->splitpath($name))[1];
+
+ foreach (File::Spec->path()) {
+ my $fullpath = catfile($_, "$name$target{exe_extension}");
+ if (-f $fullpath and -x $fullpath) {
+ return $fullpath;
+ }
+ }
+ }
+}
+
# Configuration printer ##############################################
sub print_table_entry
return realpath($dir);
}
-sub which
- {
- my($name)=@_;
- my $path;
- foreach $path (split /:/, $ENV{PATH})
- {
- my $fullpath = "$path/$name$target{exe_extension}";
- if (-f $fullpath and -x $fullpath)
- {
- return $fullpath
- unless ($name eq "perl" and
- system("$fullpath -e " . '\'exit($]<5.0);\''));
- }
- }
- }
-
sub quotify {
my %processors = (
perl => sub { my $x = shift;
}
}
}
+
+# tokenize($line)
+# $line is a line of text to split up into tokens
+# returns a list of tokens
+#
+# Tokens are divided by spaces. If the tokens include spaces, they
+# have to be quoted with single or double quotes. Double quotes
+# inside a double quoted token must be escaped. Escaping is done
+# with backslash.
+# Basically, the same quoting rules apply for " and ' as in any
+# Unix shell.
+sub tokenize {
+ my $line = my $debug_line = shift;
+ my @result = ();
+
+ while ($line =~ s|^\s+||, $line ne "") {
+ my $token = "";
+ while ($line ne "" && $line !~ m|^\s|) {
+ if ($line =~ m/^"((?:[^"\\]+|\\.)*)"/) {
+ $token .= $1;
+ $line = $';
+ } elsif ($line =~ m/^'([^']*)'/) {
+ $token .= $1;
+ $line = $';
+ } elsif ($line =~ m/^(\S+)/) {
+ $token .= $1;
+ $line = $';
+ }
+ }
+ push @result, $token;
+ }
+
+ if ($ENV{CONFIGURE_DEBUG_TOKENIZE}) {
+ print STDERR "DEBUG[tokenize]: Parsed '$debug_line' into:\n";
+ print STDERR "DEBUG[tokenize]: ('", join("', '", @result), "')\n";
+ }
+ return @result;
+}
projects / openssl.git / blobdiff