-"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::DES_UNROLL:::",
-"sunos-gcc","gcc:-O3 -mv8::BN_LLONG RC4_CHAR DES_UNROLL DES_PTR DES_RISC1:::",
-
-# SGI configurations. If the box is rather old (r3000 cpu), you will
-# probably have to remove the '-mips2' flag. I've only been using
-# IRIX 5.[23].
-# I've recently done 32 and 64 bit mips assember, it make this RSA
-# 3 times faster, use if at all possible.
-#"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::",
-"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:asm/mips1.o::",
-"irix64-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
-"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:asm/mips1.o::",
-"irix64-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
-"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN:::asm/r3000.o::",
-# This is the n64 mode build.
-"irix-n64-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT:asm/mips3_64.o::",
-
-# HPUX config. I've been building on HPUX 9, so the options may be
-# different on version 10. The pa-risc2.o assember file is 2 times
-# faster than the old asm/pa-risc.o version but it may not run on old
-# PA-RISC CPUs. If you have problems, swap back to the old one.
-# Both were generated by gcc, so use the C version with the PA-RISC specific
-# options turned on if you are using gcc.
-"hpux-cc", "cc:-DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit +O4 -Wl,-a,archive::DES_PTR DES_UNROLL DES_RISC1:asm/pa-risc2.o::",
-"hpux-kr-cc", "cc:-DB_ENDIAN -DNOCONST -DNOPROTO -D_HPUX_SOURCE::DES_PTR DES_UNROLL:asm/pa-risc2.o::",
-"hpux-gcc", "gcc:-DB_ENDIAN -O3::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
-# HPUX from www.globus.org
-"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::DES_PTR DES_UNROLL DES_RISC1:::",
-"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
+##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown)::DES_UNROLL:::",
+"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",
+
+#### IRIX 5.x configs
+# -mips2 flag is added by ./config when appropriate.
+"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
+"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::",
+#### IRIX 6.x configs
+# Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
+# './Configure irix-[g]cc' manually.
+# -mips4 flag is added by ./config when appropriate.
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+# N64 ABI builds.
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+
+#### Unified HP-UX ANSI C configs.
+# Special notes:
+# - Originally we were optimizing at +O4 level. It should be noted
+# that the only difference between +O3 and +O4 is global inter-
+# procedural analysis. As it has to be performed during the link
+# stage the compiler leaves behind certain pseudo-code in lib*.a
+# which might be release or even patch level specific. Generating
+# the machine code for and analyzing the *whole* program appears
+# to be *extremely* memory demanding while the performance gain is
+# actually questionable. The situation is intensified by the default
+# HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB
+# which is way too low for +O4. In other words, doesn't +O3 make
+# more sense?
+# - Keep in mind that the HP compiler by default generates code
+# suitable for execution on the host you're currently compiling at.
+# If the toolkit is ment to be used on various PA-RISC processors
+# consider './config +Dportable'.
+# - +DD64 is chosen in favour of +DA2.0W because it's ment to be
+# compatible with *future* releases.
+# - If you run ./Configure hpux-parisc-[g]cc manually don't forget to
+# pass -D_REENTRANT on HP-UX 10 and later.
+# - -DMD32_XARRAY triggers workaround for compiler bug we ran into in
+# 32-bit message digests. (For the moment of this writing) HP C
+# doesn't seem to "digest" too many local variables (they make "him"
+# chew forever:-). For more details look-up MD32_XARRAY comment in
+# crypto/sha/sha_lcl.h.
+# <appro@fy.chalmers.se>
+#
+#!#"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+# Since there is mention of this in shlib/hpux10-cc.sh
+"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn",
+
+# More attempts at unified 10.X and 11.X targets for HP C compiler.
+#
+# Chris Ruemmler <ruemmler@cup.hp.com>
+# Kevin Steves <ks@hp.se>
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl",
+
+# HPUX 9.X config.
+# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or
+# egcs. gcc 2.8.1 is also broken.
+
+"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown):-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+# If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
+# please report your OS and compiler version to the openssl-bugs@openssl.org
+# mailing list.
+"hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown):-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+
+"hpux-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+# If hpux-gcc fails, try this one:
+"hpux-brokengcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+
+# HPUX 10.X config. Supports threads.
+"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+# If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG):
+"hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+
+"hpux10-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+# If hpux10-gcc fails, try this one:
+"hpux10-brokengcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT:-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+
+# HPUX 11.X from www.globus.org.
+# Only works on PA-RISC 2.0 cpus, and not optimized. Why?
+#"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
+#"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
+# Use unified settings above instead.
+
+#### HP MPE/iX http://jazz.external.hp.com/src/openssl/
+"MPE/iX-gcc", "gcc:-D_ENDIAN -DBN_DIV2W -O3 -DMPE -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB::(unknown):-L/SYSLOG/PUB -lsyslog -lsocket -lcurses:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",