-#!/usr/local/bin/perl
+#!/usr/local/bin/perl -w
+
+require 5.000;
+use strict;
+
#
# see PROBLEMS for instructions on what sort of things to do when
# tracking a bug --tjh
# MD5_ASM use some extra md5 assember,
# SHA1_ASM use some extra sha1 assember, must define L_ENDIAN for x86
# RMD160_ASM use some extra ripemd160 assember,
-# BN_ASM use some extra bn assember,
-$x86_gcc_des="DES_PTR DES_RISC1 DES_UNROLL";
+my $x86_gcc_des="DES_PTR DES_RISC1 DES_UNROLL";
# MD2_CHAR slags pentium pros
-$x86_gcc_opts="RC4_INDEX MD2_INT BF_PTR2";
+my $x86_gcc_opts="RC4_INDEX MD2_INT BF_PTR2";
# MODIFY THESE PARAMETERS IF YOU ARE GOING TO USE THE 'util/speed.sh SCRIPT
# Don't worry about these normally
-$tcc="cc";
-$tflags="-fast -Xa";
-$tbn_mul="";
-$tlib="-lnsl -lsocket";
+my $tcc="cc";
+my $tflags="-fast -Xa";
+my $tbn_mul="";
+my $tlib="-lnsl -lsocket";
#$bits1="SIXTEEN_BIT ";
#$bits2="THIRTY_TWO_BIT ";
-$bits1="THIRTY_TWO_BIT ";
-$bits2="SIXTY_FOUR_BIT ";
+my $bits1="THIRTY_TWO_BIT ";
+my $bits2="SIXTY_FOUR_BIT ";
-$x86_sol_asm="asm/bn86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
-$x86_elf_asm="asm/bn86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
-$x86_out_asm="asm/bn86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
-$x86_bsdi_asm="asm/bn86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
+my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
+my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
+my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
+my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
# -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
# So the md5_locl.h file has an undef B_ENDIAN if sun is defined
#config-string CC : CFLAGS : LDFLAGS : special header file mods:bn_asm \
# des_asm:bf_asm
-%table=(
+my %table=(
#"b", "$tcc:$tflags:$tlib:$bits1:$tbn_mul::",
#"bl-4c-2c", "$tcc:$tflags:$tlib:${bits1}BN_LLONG RC4_CHAR MD2_CHAR:$tbn_mul::",
#"bl-4c-ri", "$tcc:$tflags:$tlib:${bits1}BN_LLONG RC4_CHAR RC4_INDEX:$tbn_mul::",
# A few of my development configs
"purify", "purify gcc:-g -DPURIFY -Wall:-lsocket -lnsl::::",
-"debug", "gcc:-DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::::",
+"debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:-lefence::::",
+"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -Wformat -Wshadow -Werror:::::",
+"debug-rse","gcc:-DTERMIOS -DL_ENDIAN -O -g -ggdb3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
"dist", "cc:-O -DNOPROTO::::",
# Basic configs that should work on any box
# My solaris setups
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DBN_ASM:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm:",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
# DO NOT use /xO[34] on sparc with SC3.0.
# It is broken, and will not pass the tests
# SGI configurations. If the box is rather old (r3000 cpu), you will
# probably have to remove the '-mips2' flag. I've only been using
# IRIX 5.[23].
-#"irix-gcc","gcc:-O2 -mips2::BN_LLONG RC4_INDEX RC4_CHAR:::",
-"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
-"irix-cc", "cc:-O2 -DTERMIOS -DB_ENDIAN::DES_PTR DES_RISC2 DES_UNROLL BF_PTR:asm/r3000.o::",
+# I've recently done 32 and 64 bit mips assember, it make this RSA
+# 3 times faster, use if at all possible.
+#"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::",
+"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:asm/mips1.o::",
+"irix64-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:asm/mips1.o::",
+"irix64-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN:::asm/r3000.o::",
+# This is the n64 mode build.
+"irix-n64-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT:asm/mips3_64.o::",
# HPUX config. I've been building on HPUX 9, so the options may be
# different on version 10. The pa-risc2.o assember file is 2 times
"hpux-cc", "cc:-DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit +O4 -Wl,-a,archive::DES_PTR DES_UNROLL DES_RISC1:asm/pa-risc2.o::",
"hpux-kr-cc", "cc:-DB_ENDIAN -DNOCONST -DNOPROTO -D_HPUX_SOURCE::DES_PTR DES_UNROLL:asm/pa-risc2.o::",
"hpux-gcc", "gcc:-DB_ENDIAN -O3::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# HPUX from www.globus.org
+"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
-# Dec Alpha, OSF/1 - the alpha400-cc is the flags for a 21164A with
+# Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with
# the new compiler
-"alpha-gcc","gcc:-O3::SIXTY_FOUR_BIT_LONGS DES_INT DES_PTR DES_RISC2:asm/alpha.o::",
-"alpha-cc", "cc:-O2::SIXTY_FOUR_BIT_LONGS DES_INT DES_PTR DES_RISC2:asm/alpha.o::",
-"alpha400-cc", "cc:-arch host -tune host -fast -std -O4 -inline speed::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
+# For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version
+"alpha-gcc","gcc:-O3::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::",
+"alpha-cc", "cc:-tune host -O4 -readonly_strings::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
+"alpha164-cc", "cc:-tune host -fast -readonly_strings::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
# The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
# bn86-elf.o file file since it is hand tweaked assembler.
-"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -DBN_ASM -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-"debug-linux-elf","gcc:-DREF_CHECK -DBN_ASM -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -DBN_ASM -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
+"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-linux-elf","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
"NetBSD-sparc", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-m86", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-x86", "gcc:-DTERMIOS -DBN_ASM -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
-"FreeBSD", "gcc:-DTERMIOS -DBN_ASM -DL_ENDIAN -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
-#"bsdi-gcc", "gcc:-O3 -ffast-math -DBN_ASM -DL_ENDIAN -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:$x86_bsdi_asm",
-"nextstep", "cc:-O3 -Wall -DBN_ASM::BN_LLONG $x86_gcc_des $x86_gcc_opts:::",
+"NetBSD-m68", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
+"NetBSD-x86", "gcc:-DTERMIOS -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
+#"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
+"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
+"FreeBSD-elf", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+#"bsdi-gcc", "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:$x86_bsdi_asm",
+"nextstep", "cc:-O3 -Wall::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::",
# NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw:-lsocket -lnsl:$x86_gcc_des ${x86_gcc_opts}:::",
# UnixWare 2.0
-"unixware-2.0","cc:-O -DFILIO_H:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::",
-"unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX $x86_des_des::",
+"unixware-2.0","cc:-O -DFILIO_H:-lsocket -lnsl:$x86_gcc_des ${x86_gcc_opts}:::",
+"unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
# IBM's AIX.
"aix-cc", "cc:-O -DAIX -DB_ENDIAN::BN_LLONG RC4_CHAR:::",
# (written by Wayne Schroeder <schroede@SDSC.EDU>)
"cray-t90-cc", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::SIXTY_FOUR_BIT_LONG DES_INT:::",
+#
+# Cray T3E (Research Center Juelich, beckman@acl.lanl.gov)
+#
+# The BIT_FIELD_LIMITS define was written for the C90 (it seems). I added
+# another use. Basically, the problem is that the T3E uses some bit fields
+# for some st_addr stuff, and then sizeof and address-of fails
+# I could not use the ams/alpha.o option because the Cray assembler, 'cam'
+# did not like it.
+"cray-t3e", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::SIXTY_FOUR_BIT_LONG DES_INT:::",
+
# DGUX, 88100.
"dgux-R3-gcc", "gcc:-O3 -fomit-frame-pointer::RC4_INDEX DES_UNROLL:::",
"dgux-R4-gcc", "gcc:-O3 -fomit-frame-pointer:-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::",
-"dgux-R4-x86-gcc", "gcc:-O3 -DBN_ASM -fomit-frame-pointer -DL_ENDIAN:-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"dgux-R4-x86-gcc", "gcc:-O3 -fomit-frame-pointer -DL_ENDIAN:-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-# SCO 5
-"sco5-cc", "cc:-O:-lsocket:$x86_gcc_des $x86_gcc_opts:::", # des options?
+# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
+# SCO cc.
+"sco5-cc", "cc::-lsocket:$x86_gcc_des ${x86_gcc_opts}:::", # des options?
# Sinix RM400
"SINIX-N","/usr/ucb/cc:-O2 -misaligned:-lucb:RC4_INDEX RC4_CHAR:::",
# Windows NT, Microsoft Visual C++ 4.0
-# hmm... bug in perl under NT, I need to concatinate :-(
-"VC-NT","cl:::BN_LLONG RC4_INDEX ".$x86_gcc_opts.":::",
-"VC-WIN32","cl:::BN_LLONG RC4_INDEX ".$x86_gcc_opts.":::",
+"VC-NT","cl:::BN_LLONG RC4_INDEX ${x86_gcc_opts}:::",
+"VC-WIN32","cl:::BN_LLONG RC4_INDEX ${x86_gcc_opts}:::",
"VC-WIN16","cl:::MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::",
"VC-W31-16","cl:::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
"VC-W31-32","cl:::MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::",
# Borland C++ 4.5
"BC-32","bcc32:::DES_PTR RC4_INDEX:::",
"BC-16","bcc:::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",
+
+# CygWin32
+"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
+
+# Our old Ultrix box :-). -O2 breaks some of the bignum stuff (now fixed,
+# it is a compiler bug, look in bug/ultrixcc.c for example code.
+"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN:::asm/mips1.o:::",
+
+# Some OpenBSD from Bob Beck <beck@obtuse.com>
+"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::",
+"OpenBSD-x86", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
+"OpenBSD", "gcc:-DTERMIOS -O3 -fomit-frame-pointer::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::",
+"OpenBSD-mips","gcc:-O2 -DL_ENDIAN:BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::",
+);
+
+# Miscellaneous hacks: this is designed to allow environments where the "one
+# makefile" option does not auto build all files.
+# The first six fields are the hard coded versions of the stuff generated by
+# ctx_size for pem.h: that is EVP_ENCODE_CTX_SIZE, EVP_MD_SIZE EVP_MD_CTX_SIZE,
+# EVP_CIPHER_SIZE, EVP_CIPHER_CTX_SIZE and EVP_MAX_MD_SIZE respectively.
+# If the seventh field is 1 then auto generate
+# crypto/date.h
+# Need to add Win16 and others here.
+
+my %misc_table = (
+"VC-WIN32", "96:60:152:40:4212:20:1",
+"VC-NT", "96:60:152:40:4212:20:1"
);
-$postfix="org";
-$Makefile="Makefile.ssl";
-$des_locl="crypto/des/des_locl.h";
-$des ="crypto/des/des.h";
-$bn ="crypto/bn/bn.h";
-$md2 ="crypto/md2/md2.h";
-$rc4 ="crypto/rc4/rc4.h";
-$rc4_locl="crypto/rc4/rc4_locl.h";
-$idea ="crypto/idea/idea.h";
-$rc2 ="crypto/rc2/rc2.h";
-$bf ="crypto/bf/bf_locl.h";
-$bn_mulw="bn_mulw.o";
-$des_enc="des_enc.o fcrypt_b.o";
-$bf_enc ="bf_enc.o";
-$cast_enc="c_enc.o";
-$rc4_enc="rc4_enc.o";
-$rc5_enc="rc5_enc.o";
-$md5_obj="";
-$sha1_obj="";
-$rmd160_obj="";
+my $no_asm=0;
+my $postfix="org";
+my $Makefile="Makefile.ssl";
+my $des_locl="crypto/des/des_locl.h";
+my $des ="crypto/des/des.h";
+my $bn ="crypto/bn/bn.h";
+my $md2 ="crypto/md2/md2.h";
+my $rc4 ="crypto/rc4/rc4.h";
+my $rc4_locl="crypto/rc4/rc4_locl.h";
+my $idea ="crypto/idea/idea.h";
+my $rc2 ="crypto/rc2/rc2.h";
+my $bf ="crypto/bf/bf_locl.h";
+my $bn_asm ="bn_asm.o";
+my $des_enc="des_enc.o fcrypt_b.o";
+my $bf_enc ="bf_enc.o";
+my $cast_enc="c_enc.o";
+my $rc4_enc="rc4_enc.o";
+my $rc5_enc="rc5_enc.o";
+my $md5_obj="";
+my $sha1_obj="";
+my $rmd160_obj="";
if ($#ARGV < 0)
{
exit(1);
}
-$flags="";
+my $flags="";
+my $libs="";
+my $target="";
foreach (@ARGV)
{
- if ($_ =~ /^-/)
+ if ($_ =~ /^no-asm$/)
+ { $no_asm=1; }
+ elsif ($_ =~ /^-/)
{
if ($_ =~ /^-[lL](.*)$/)
{
}
else
{
- die "unknown options, only -Dxxx, -Lxxx -lxxx supported\n";
+ die "unknown options, only -Dxxx, -Lxxx and -lxxx supported\n";
}
}
else
exit(1);
}
-($cc,$cflags,$lflags,$bn_ops,$bn_obj,$des_obj,$bf_obj,$md5_obj,$sha1_obj,
- $cast_obj,$rc4_obj,$rmd160_obj,$rc5_obj)=
- split(/\s*:\s*/,$table{$target});
+(my $cc,my $cflags,my $lflags,my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
+ $md5_obj,$sha1_obj,my $cast_obj,my $rc4_obj,$rmd160_obj,my $rc5_obj)=
+ split(/\s*:\s*/,$table{$target} . ":" x 20 , -1);
$cflags="$flags$cflags" if ($flags ne "");
$lflags="$libs$lflags"if ($libs ne "");
-$bn_obj=$bn_mulw unless ($bn_obj =~ /\.o$/);
+if ($no_asm)
+ {
+ $bn_obj=$des_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj="";
+ $sha1_obj=$md5_obj=$rmd160_obj="";
+ }
+
+#my ($bn1)=split(/\s+/,$bn_obj);
+#$bn1 = "" unless defined $bn1;
+#$bn1=$bn_asm unless ($bn1 =~ /\.o$/);
+#$bn_obj="$bn1";
+
+$bn_obj = $bn_asm unless $bn_obj ne "";
+
$des_obj=$des_enc unless ($des_obj =~ /\.o$/);
$bf_obj=$bf_enc unless ($bf_obj =~ /\.o$/);
$cast_obj=$cast_enc unless ($cast_obj =~ /\.o$/);
$cflags.=" -DRMD160_ASM";
}
-$n=&file_new($Makefile);
-open(IN,"<".$Makefile) || die "unable to read $Makefile:$!\n";
-open(OUT,">".$n) || die "unable to read $n:$!\n";
+open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n";
+open(OUT,">$Makefile") || die "unable to create $Makefile:$!\n";
while (<IN>)
{
chop;
+ s/^PLATFORM=.*$/PLATFORM=$target/;
s/^CC=.*$/CC= $cc/;
s/^CFLAG=.*$/CFLAG= $cflags/;
s/^EX_LIBS=.*$/EX_LIBS= $lflags/;
- s/^BN_MULW=.*$/BN_MULW= $bn_obj/;
+ s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
s/^DES_ENC=.*$/DES_ENC= $des_obj/;
s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/;
}
close(IN);
close(OUT);
-&Rename($Makefile,&file_old($Makefile));
-&Rename($n,$Makefile);
+
print "CC =$cc\n";
print "CFLAG =$cflags\n";
print "EX_LIBS =$lflags\n";
-print "BN_MULW =$bn_obj\n";
+print "BN_ASM =$bn_obj\n";
print "DES_ENC =$des_obj\n";
print "BF_ENC =$bf_obj\n";
print "CAST_ENC =$cast_obj\n";
print "SHA1_OBJ_ASM =$sha1_obj\n";
print "RMD160_OBJ_ASM=$rmd160_obj\n";
-$des_ptr=0;
-$des_risc1=0;
-$des_risc2=0;
-$des_unroll=0;
-$bn_ll=0;
-$def_int=2;
-$rc4_int=$def_int;
-$md2_int=$def_int;
-$idea_int=$def_int;
-$rc2_int=$def_int;
-$rc4_idx=0;
-$bf_ptr=0;
-@type=("char","short","int","long");
-($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0);
+my $des_ptr=0;
+my $des_risc1=0;
+my $des_risc2=0;
+my $des_unroll=0;
+my $bn_ll=0;
+my $def_int=2;
+my $rc4_int=$def_int;
+my $md2_int=$def_int;
+my $idea_int=$def_int;
+my $rc2_int=$def_int;
+my $rc4_idx=0;
+my $bf_ptr=0;
+my @type=("char","short","int","long");
+my ($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0);
+
+my $des_int;
foreach (sort split(/\s+/,$bn_ops))
{
($b64l,$b64,$b32,$b16,$b8)=(0,0,0,0,1) if /EIGHT_BIT/;
}
-(($in=$bn) =~ s/\.([^.]+)/.$postfix/);
-$n=&file_new($bn);
+((my $in=$bn) =~ s/\.([^.]+)/.$postfix/);
+my $n=&file_new($bn);
open(IN,"<".$in) || die "unable to read $bn:$!\n";
open(OUT,">$n") || die "unable to read $n:$!\n";
while (<IN>)
&Rename($bf,&file_old($bf));
&Rename($n,$bf);
+# Now the miscellaneous fixups
+
+if(defined $misc_table{$target}) {
+ my ($enc_ctx, $md_size, $md_ctx_size, $cipher_size, $cipher_ctx_size,
+ $max_md_size, $date_fix) =
+ split(/\s*:\s*/,$misc_table{$target} . ":", -1);
+
+#print "EVP_ENCODE_CTX_SIZE $enc_ctx\n";
+#print "EVP_MD_SIZE $md_size\n";
+#print "EVP_MD_CTX_SIZE $md_ctx_size\n";
+#print "EVP_CIPHER_SIZE $cipher_size\n";
+#print "EVP_CIPHER_CTX_SIZE $cipher_ctx_size\n";
+#print "EVP_MAX_MD_SIZE $max_md_size\n";
+#printf "Date fix: %s\n", $date_fix ? "Yes" : "No";
+
+# Fix the date
+
+if($date_fix) {
+ open (OUT,">crypto/date.h") || die "Can't open date.h";
+ printf OUT "#define DATE \"%s\"\n", scalar gmtime();
+ close(OUT);
+}
+
+open (IN, "crypto/pem/pem.org") || die "Can't open crypto/pem/pem.org";
+open (OUT, ">crypto/pem/pem.h") || die "Can't create crypto/pem/pem.h";
+
+# Now fix up pem.h
+while(<IN>) {
+ chop;
+ s/^(#define EVP_ENCODE_CTX_SIZE).*$/$1 $enc_ctx/;
+ s/^(#define EVP_MD_SIZE).*$/$1 $md_size/;
+ s/^(#define EVP_MD_CTX_SIZE).*$/$1 $md_ctx_size/;
+ s/^(#define EVP_CIPHER_SIZE).*$/$1 $cipher_size/;
+ s/^(#define EVP_CIPHER_CTX_SIZE).*$/$1 $cipher_ctx_size/;
+ s/^(#define EVP_MAX_MD_SIZE).*$/$1 $max_md_size/;
+ print OUT "$_\n";
+}
+
+close (IN);
+close (OUT);
+
+
+}
+
print "SIXTY_FOUR_BIT_LONG mode\n" if $b64l;
print "SIXTY_FOUR_BIT mode\n" if $b64;
print "THIRTY_TWO_BIT mode\n" if $b32;
{
print STDERR "Usage: Configure [-Dxxx] [-Lxxx] [-lxxx] os/compiler\n";
print STDERR "pick os/compiler from:";
- $j=0;
+ my $j=0;
+ my $i;
foreach $i (sort keys %table)
{
- next if /^b-/;
print STDERR "\n" if ($j++ % 4) == 0;
printf(STDERR "%-18s ",$i);
}
sub Rename
{
- local($from,$to)=@_;
-
+ my($from,$to)=@_;
unlink($to);
- rename($from,$to) || die "unable to rename $from to $to:$!\n";
+ if(!rename($from,$to))
+ {
+ -e $from && die "unable to rename $from to $to:$!\n";
+ }
}
-sub file_new { local($a)=@_; $a =~ s/(\.[^.]+$|$)/.new/; $a; }
-sub file_old { local($a)=@_; $a =~ s/(\.[^.]+$|$)/.old/; $a; }
+sub file_new { my($a)=@_; $a =~ s/(\.[^.]+$|$)/.new/; $a; }
+sub file_old { my($a)=@_; $a =~ s/(\.[^.]+$|$)/.old/; $a; }
projects / openssl.git / blobdiff