use File::Basename;
use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
use File::Path qw/mkpath/;
+use if $^O ne "VMS", 'File::Glob' => qw/glob/;
# see INSTALL for instructions.
# Collect target configurations
my $pattern = catfile(dirname($0), "Configurations", "*.conf");
-foreach (sort glob($pattern) ) {
+foreach (sort glob($pattern)) {
&read_config($_);
}
$pattern = catfile($ENV{$local_config_envname}, '*.conf');
}
- foreach (sort glob($pattern) ) {
+ foreach (sort glob($pattern)) {
&read_config($_);
}
}
my @deprecated_disablables = (
"ssl2",
+ "buf-freelists",
);
# All of the following is disabled by default (RC5 was enabled before 0.9.8):
"zlib" => "default",
"zlib-dynamic" => "default",
"crypto-mdebug" => "default",
+ "crypto-mdebug-backtrace" => "default",
"heartbeats" => "default",
);
"\$(CROSS_COMPILE)ranlib" : "true");
$target{ar} = $ENV{'AR'} || $target{ar} || "ar";
$target{nm} = $ENV{'NM'} || $target{nm} || "nm";
+$target{rc} =
+ $ENV{'RC'} || $ENV{'WINDRES'} || $target{rc} || "windres";
# For cflags, lflags, plib_lflags, ex_libs and defines, add the debug_
# or release_ attributes.
=> sub { die "ENDIF out of scope" if ! @skip;
pop @skip; },
qr/^\s*PROGRAMS\s*=\s*(.*)\s*$/
- => sub { push @programs, split(/\s+/, $1)
+ => sub { push @programs, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*LIBS\s*=\s*(.*)\s*$/
- => sub { push @libraries, split(/\s+/, $1)
+ => sub { push @libraries, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*ENGINES\s*=\s*(.*)\s*$/
- => sub { push @engines, split(/\s+/, $1)
+ => sub { push @engines, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SCRIPTS\s*=\s*(.*)\s*$/
- => sub { push @scripts, split(/\s+/, $1)
+ => sub { push @scripts, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*EXTRA\s*=\s*(.*)\s*$/
- => sub { push @extra, split(/\s+/, $1)
+ => sub { push @extra, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*OVERRIDES\s*=\s*(.*)\s*$/
- => sub { push @overrides, split(/\s+/, $1)
+ => sub { push @overrides, tokenize($1)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*ORDINALS\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/,
- => sub { push @{$ordinals{$1}}, split(/\s+/, $2)
+ => sub { push @{$ordinals{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SOURCE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$sources{$1}}, split(/\s+/, $2)
+ => sub { push @{$sources{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SHARED_SOURCE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$shared_sources{$1}}, split(/\s+/, $2)
+ => sub { push @{$shared_sources{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*INCLUDE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$includes{$1}}, split(/\s+/, $2)
+ => sub { push @{$includes{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*DEPEND\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$depends{$1}}, split(/\s+/, $2)
+ => sub { push @{$depends{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*GENERATE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
=> sub { push @{$generate{$1}}, $2
if !@skip || $skip[$#skip] > 0 },
qr/^\s*RENAME\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$renames{$1}}, split(/\s+/, $2)
+ => sub { push @{$renames{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*SHARED_NAME\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/
- => sub { push @{$sharednames{$1}}, split(/\s+/, $2)
+ => sub { push @{$sharednames{$1}}, tokenize($2)
if !@skip || $skip[$#skip] > 0 },
qr/^\s*BEGINRAW\[((?:\\.|[^\\\]])+)\]\s*$/
=> sub {
foreach (@templates) {
die "Can't open $_, $!" unless -f $_;
}
- my $cmd = "$config{perl} \"-I.\" \"-Mconfigdata\" $dofile -o\"Configure\" \"".join("\" \"",@templates)."\" > \"$out.new\"";
+ my $cmd = "$config{perl} \"-I.\" \"-Mconfigdata\" \"$dofile\" -o\"Configure\" \"".join("\" \"",@templates)."\" > \"$out.new\"";
#print STDERR "DEBUG[run_dofile]: \$cmd = $cmd\n";
system($cmd);
exit 1 if $? != 0;
rename("$out.new", $out) || die "Can't rename $out.new, $!";
}
+sub which
+{
+ my ($name)=@_;
+
+ if (eval { require IPC::Cmd; 1; }) {
+ IPC::Cmd->import();
+ return scalar IPC::Cmd::can_run($name);
+ } else {
+ # if there is $directories component in splitpath,
+ # then it's not something to test with $PATH...
+ return $name if (File::Spec->splitpath($name))[1];
+
+ foreach (File::Spec->path()) {
+ my $fullpath = catfile($_, "$name$target{exe_extension}");
+ if (-f $fullpath and -x $fullpath) {
+ return $fullpath;
+ }
+ }
+ }
+}
+
# Configuration printer ##############################################
sub print_table_entry
return realpath($dir);
}
-sub which
- {
- my($name)=@_;
- my $path;
- foreach $path (split /:/, $ENV{PATH})
- {
- my $fullpath = "$path/$name$target{exe_extension}";
- if (-f $fullpath and -x $fullpath)
- {
- return $fullpath
- unless ($name eq "perl" and
- system("$fullpath -e " . '\'exit($]<5.0);\''));
- }
- }
- }
-
sub quotify {
my %processors = (
perl => sub { my $x = shift;
}
}
}
+
+# tokenize($line)
+# $line is a line of text to split up into tokens
+# returns a list of tokens
+#
+# Tokens are divided by spaces. If the tokens include spaces, they
+# have to be quoted with single or double quotes. Double quotes
+# inside a double quoted token must be escaped. Escaping is done
+# with backslash.
+# Basically, the same quoting rules apply for " and ' as in any
+# Unix shell.
+sub tokenize {
+ my $line = my $debug_line = shift;
+ my @result = ();
+
+ while ($line =~ s|^\s+||, $line ne "") {
+ my $token = "";
+ while ($line ne "" && $line !~ m|^\s|) {
+ if ($line =~ m/^"((?:[^"\\]+|\\.)*)"/) {
+ $token .= $1;
+ $line = $';
+ } elsif ($line =~ m/^'([^']*)'/) {
+ $token .= $1;
+ $line = $';
+ } elsif ($line =~ m/^(\S+)/) {
+ $token .= $1;
+ $line = $';
+ }
+ }
+ push @result, $token;
+ }
+
+ if ($ENV{CONFIGURE_DEBUG_TOKENIZE}) {
+ print STDERR "DEBUG[tokenize]: Parsed '$debug_line' into:\n";
+ print STDERR "DEBUG[tokenize]: ('", join("', '", @result), "')\n";
+ }
+ return @result;
+}
projects / openssl.git / blobdiff