}
my $sd1 = sourcedir("ssl","record");
my $sd2 = sourcedir("ssl","statem");
- $unified_info{before}->{"[.test]heartbeat_test.OBJ"}
- = $unified_info{before}->{"[.test]ssltest_old.OBJ"}
- = qq(record_include = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;"
- define record 'record_include'
- statem_include = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;"
- define statem 'statem_include');
- $unified_info{after}->{"[.test]heartbeat_test.OBJ"}
- = $unified_info{after}->{"[.test]ssltest.OBJ"}
- = qq(deassign statem
- deassign record);
- foreach (grep /^\[\.ssl\.(?:record|statem)\].*\.o$/, keys %{$unified_info{sources}}) {
+ my @ssl_locl_users =
+ ( "[.test]cipher_overhead_test.o",
+ "[.test]dtls_mtu_test.o",
+ "[.test]heartbeat_test.o",
+ "[.test]ssltest_old.o",
+ grep /^\[\.ssl\.(?:record|statem)\].*\.o$/, keys %{$unified_info{sources}} );
+ foreach (@ssl_locl_users) {
(my $x = $_) =~ s|\.o$|.OBJ|;
$unified_info{before}->{$x}
= qq(record_include = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;"
$installtop -}
SYSTARTUP={- catdir($installtop, '[.SYS$STARTUP]'); -}
# This is the standard central area to store certificates, private keys...
-OPENSSLDIR={- catdir($config{openssldir}) ||
+OPENSSLDIR={- catdir($config{openssldir}) or
$config{prefix} ? catdir($config{prefix},"COMMON")
: "SYS\$COMMON:[OPENSSL-COMMON]" -}
# The same, but for C
LIB_CFLAGS={- $target{lib_cflags} || "" -}
DSO_CFLAGS={- $target{dso_cflags} || "" -}
BIN_CFLAGS={- $target{bin_cflags} || "" -}
+NO_INST_LIB_CFLAGS={- $target{no_inst_lib_cflags} || '$(LIB_CFLAGS)' -}
+NO_INST_DSO_CFLAGS={- $target{no_inst_dso_cflags} || '$(DSO_CFLAGS)' -}
+NO_INST_BIN_CFLAGS={- $target{no_inst_bin_cflags} || '$(BIN_CFLAGS)' -}
PERL={- $config{perl} -}
$(NODEBUG) !
$(NODEBUG) ! Figure out the architecture
$(NODEBUG) !
- $(NODEBUG) arch == f$edit( f$getsyi( "arch_name"), "upcase")
+ $(NODEBUG) arch = f$edit( f$getsyi( "arch_name"), "upcase")
$(NODEBUG) !
$(NODEBUG) ! Set up logical names for the libraries, so LINK and
$(NODEBUG) ! running programs can use them.
DEFINE SRCTOP {- sourcedir() -}
DEFINE BLDTOP {- builddir() -}
DEFINE OPENSSL_ENGINES {- builddir("engines") -}
+ DEFINE OPENSSL_DEBUG_MEMORY "on"
IF "$(VERBOSE)" .NES. "" THEN DEFINE VERBOSE "$(VERBOSE)"
$(PERL) {- sourcefile("test", "run_tests.pl") -} $(TESTS)
+ DEASSIGN OPENSSL_DEBUG_MEMORY
DEASSIGN OPENSSL_ENGINES
DEASSIGN BLDTOP
DEASSIGN SRCTOP
IF F$SEARCH("OSSL_DATAROOT:[000000]openssl.cnf") .EQS. "" THEN -
COPY/PROT=W:R {- sourcefile("apps", "openssl-vms.cnf") -} -
ossl_dataroot:[000000]openssl.cnf
+ @ ! Install CTLOG configuration file
+ COPY/PROT=W:R {- sourcefile("apps", "ct_log_list.cnf") -} -
+ ossl_dataroot:[000000]ct_log_list.cnf-dist
+ IF F$SEARCH("OSSL_DATAROOT:[000000]ct_log_list.cnf") .EQS. "" THEN -
+ COPY/PROT=W:R {- sourcefile("apps", "ct_log_list.cnf") -} -
+ ossl_dataroot:[000000]ct_log_list.cnf
install_shared : check_INSTALLTOP
@ {- output_off() if $disabled{shared}; "" -} !
CLOSE CONFIG
install_html_docs : check_INSTALLTOP
- @ $(PERL) {- sourcefile("util", "process_docs.pl") -} -
- --destdir=ossl_installroot:[HTML] --type=html
+ sourcedir = F$PARSE("{- $sourcedir -}A.;","[]") - "]A.;" + ".DOC]"
+ $(PERL) {- sourcefile("util", "process_docs.pl") -} -
+ --sourcedir='sourcedir' --destdir=ossl_installroot:[HTML] -
+ --type=html
check_INSTALLTOP :
@ IF "$(INSTALLTOP)" .EQS. "" THEN -
# Building targets ###################################################
-configdata.pm : {- join(" ", sourcefile("Configurations", "descrip.mms.tmpl"), sourcefile("Configurations", "common.tmpl")) -} $(SRCDIR)Configure $(SRCDIR)config.com {- join(" ", @{$config{build_infos}}) -}
+configdata.pm : $(SRCDIR)Configure $(SRCDIR)config.com {- join(" ", @{$config{build_file_templates}}, @{$config{build_infos}}, @{$config{conf_files}}) -}
@ WRITE SYS$OUTPUT "Reconfiguring..."
perl $(SRCDIR)Configure reconf
@ WRITE SYS$OUTPUT "*************************************************"
my $srcs =
join(", ",
map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}});
- my $ecflags = { lib => '$(LIB_CFLAGS)',
- dso => '$(DSO_CFLAGS)',
- bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
+ my $ecflags;
+ if ($args{installed}) {
+ $ecflags = { lib => '$(LIB_CFLAGS)',
+ dso => '$(DSO_CFLAGS)',
+ bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
+ } else {
+ $ecflags = { lib => '$(NO_INST_LIB_CFLAGS)',
+ dso => '$(NO_INST_DSO_CFLAGS)',
+ bin => '$(NO_INST_BIN_CFLAGS)' } -> {$args{intent}};
+ }
my $incs_on = "\@ !";
my $incs_off = "\@ !";
my $incs = "";
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
- my $write_opt =
+ my $write_opt1 =
join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
"WRITE OPT_FILE \"$x" } @objs).
- "\"\n\t".
+ "\"";
+ my $write_opt2 =
join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
$x =~ s|(\.EXE)|$1/SHARE|;
$x =~ s|(\.OLB)|$1/LIB|;
$lib.EXE : $deps
OPEN/WRITE/SHARE=READ OPT_FILE $lib.OPT
TYPE $engine_opt /OUTPUT=OPT_FILE:
- $write_opt
+ $write_opt1
+ $write_opt2
CLOSE OPT_FILE
LINK /MAP=$lib.MAP /FULL/SHARE=$lib.EXE $lib.OPT/OPT \$(EX_LIBS)
- PURGE $lib.EXE,$lib.OPT,$lib.MAP
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
- my $write_opt =
+ my $write_opt1 =
join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
"WRITE OPT_FILE \"$x" } @objs).
- "\"\n\t".
+ "\"";
+ my $write_opt2 =
join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
$x =~ s|(\.EXE)|$1/SHARE|;
$x =~ s|(\.OLB)|$1/LIB|;
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
+ # The linking commands looks a bit complex, but it's for good reason.
+ # When you link, say, foo.obj, bar.obj and libsomething.exe/share, and
+ # bar.obj happens to have a symbol that also exists in libsomething.exe,
+ # the linker will warn about it, loudly, and will then choose to pick
+ # the first copy encountered (the one in bar.obj in this example).
+ # On Unix and on Windows, the corresponding maneuvre goes through
+ # silently with the same effect.
+ # With some test programs, made for checking the internals of OpenSSL,
+ # we do this kind of linking deliberately, picking a few specific object
+ # files from within [.crypto] or [.ssl] so we can reach symbols that are
+ # otherwise unreachable (since the shareable images only exports the
+ # symbols listed in [.util]*.num), and then with the shared libraries
+ # themselves. So we need to silence the warning about multiply defined
+ # symbols, to mimic the way linking work on Unix and Windows, and so
+ # the build isn't interrupted (MMS stops when warnings are signaled,
+ # by default), and so someone building doesn't have to worry where it
+ # isn't necessary. If there are other warnings, however, we show them
+ # and let it break the build.
return <<"EOF";
$bin.EXE : $deps
OPEN/WRITE/SHARE=READ OPT_FILE $bin.OPT
- $write_opt
+ $write_opt1
+ $write_opt2
CLOSE OPT_FILE
- LINK/EXEC=$bin.EXE \$(LDFLAGS) $bin.OPT/OPT \$(EX_LIBS)
+ - pipe SPAWN/WAIT/NOLOG/OUT=$bin.LINKLOG -
+ LINK/EXEC=$bin.EXE \$(LDFLAGS) $bin.OPT/OPT \$(EX_LIBS) ; -
+ link_status = \$status ; link_severity = link_status .AND. 7
+ @ search_severity = 1
+ -@ IF link_severity .EQ. 0 THEN -
+ pipe SEARCH $bin.LINKLOG "%","-"/MATCH=AND | -
+ SPAWN/WAIT/NOLOG/OUT=NLA0: -
+ SEARCH SYS\$INPUT: "-W-MULDEF,"/MATCH=NOR ; -
+ search_severity = \$severity
+ @ ! search_severity is 3 when the last search didn't find any matching
+ @ ! string: %SEARCH-I-NOMATCHES, no strings matched
+ @ ! If that was the result, we pretend linking got through without
+ @ ! fault or warning.
+ @ IF search_severity .EQ. 3 THEN link_severity = 1
+ @ ! At this point, if link_severity shows that there was a fault
+ @ ! or warning, make sure to restore the linking status.
+ -@ IF .NOT. link_severity THEN TYPE $bin.LINKLOG
+ -@ DELETE $bin.LINKLOG;*
+ @ IF .NOT. link_severity THEN SPAWN/WAIT/NOLOG EXIT 'link_status'
- PURGE $bin.EXE,$bin.OPT
EOF
}
projects / openssl.git / blobdiff