https://github.com/openssl/openssl/commits/ and pick the appropriate
release branch.
- Changes between 1.1.0h and 1.1.1 [xx XXX xxxx]
+ Changes between 1.1.1a and 1.1.1b [xx XXX xxxx]
+
+ *) Move strictness check from EVP_PKEY_asn1_new() to EVP_PKEY_asn1_add0().
+ [Richard Levitte]
+
+ *) Remove the 'dist' target and add a tarball building script. The
+ 'dist' target has fallen out of use, and it shouldn't be
+ necessary to configure just to create a source distribution.
+ [Richard Levitte]
+
+ Changes between 1.1.1 and 1.1.1a [20 Nov 2018]
+
+ *) Timing vulnerability in DSA signature generation
+
+ The OpenSSL DSA signature algorithm has been shown to be vulnerable to a
+ timing side channel attack. An attacker could use variations in the signing
+ algorithm to recover the private key.
+
+ This issue was reported to OpenSSL on 16th October 2018 by Samuel Weiser.
+ (CVE-2018-0734)
+ [Paul Dale]
+
+ *) Timing vulnerability in ECDSA signature generation
+
+ The OpenSSL ECDSA signature algorithm has been shown to be vulnerable to a
+ timing side channel attack. An attacker could use variations in the signing
+ algorithm to recover the private key.
+
+ This issue was reported to OpenSSL on 25th October 2018 by Samuel Weiser.
+ (CVE-2018-0735)
+ [Paul Dale]
+
+ *) Added EVP_PKEY_ECDH_KDF_X9_63 and ecdh_KDF_X9_63() as replacements for
+ the EVP_PKEY_ECDH_KDF_X9_62 KDF type and ECDH_KDF_X9_62(). The old names
+ are retained for backwards compatibility.
+ [Antoine Salon]
+
+ *) Fixed the issue that RAND_add()/RAND_seed() silently discards random input
+ if its length exceeds 4096 bytes. The limit has been raised to a buffer size
+ of two gigabytes and the error handling improved.
+
+ This issue was reported to OpenSSL by Dr. Falko Strenzke. It has been
+ categorized as a normal bug, not a security issue, because the DRBG reseeds
+ automatically and is fully functional even without additional randomness
+ provided by the application.
+
+ Changes between 1.1.0i and 1.1.1 [11 Sep 2018]
+
+ *) Add a new ClientHello callback. Provides a callback interface that gives
+ the application the ability to adjust the nascent SSL object at the
+ earliest stage of ClientHello processing, immediately after extensions have
+ been collected but before they have been processed. In particular, this
+ callback can adjust the supported TLS versions in response to the contents
+ of the ClientHello
+ [Benjamin Kaduk]
+
+ *) Add SM2 base algorithm support.
+ [Jack Lloyd]
+
+ *) s390x assembly pack: add (improved) hardware-support for the following
+ cryptographic primitives: sha3, shake, aes-gcm, aes-ccm, aes-ctr, aes-ofb,
+ aes-cfb/cfb8, aes-ecb.
+ [Patrick Steuer]
+
+ *) Make EVP_PKEY_asn1_new() a bit stricter about its input. A NULL pem_str
+ parameter is no longer accepted, as it leads to a corrupt table. NULL
+ pem_str is reserved for alias entries only.
+ [Richard Levitte]
+
+ *) Use the new ec_scalar_mul_ladder scaffold to implement a specialized ladder
+ step for prime curves. The new implementation is based on formulae from
+ differential addition-and-doubling in homogeneous projective coordinates
+ from Izu-Takagi "A fast parallel elliptic curve multiplication resistant
+ against side channel attacks" and Brier-Joye "Weierstrass Elliptic Curves
+ and Side-Channel Attacks" Eq. (8) for y-coordinate recovery, modified
+ to work in projective coordinates.
+ [Billy Bob Brumley, Nicola Tuveri]
+
+ *) Change generating and checking of primes so that the error rate of not
+ being prime depends on the intended use based on the size of the input.
+ For larger primes this will result in more rounds of Miller-Rabin.
+ The maximal error rate for primes with more than 1080 bits is lowered
+ to 2^-128.
+ [Kurt Roeckx, Annie Yousar]
+
+ *) Increase the number of Miller-Rabin rounds for DSA key generating to 64.
+ [Kurt Roeckx]
+
+ *) The 'tsget' script is renamed to 'tsget.pl', to avoid confusion when
+ moving between systems, and to avoid confusion when a Windows build is
+ done with mingw vs with MSVC. For POSIX installs, there's still a
+ symlink or copy named 'tsget' to avoid that confusion as well.
+ [Richard Levitte]
+
+ *) Revert blinding in ECDSA sign and instead make problematic addition
+ length-invariant. Switch even to fixed-length Montgomery multiplication.
+ [Andy Polyakov]
+
+ *) Use the new ec_scalar_mul_ladder scaffold to implement a specialized ladder
+ step for binary curves. The new implementation is based on formulae from
+ differential addition-and-doubling in mixed Lopez-Dahab projective
+ coordinates, modified to independently blind the operands.
+ [Billy Bob Brumley, Sohaib ul Hassan, Nicola Tuveri]
+
+ *) Add a scaffold to optionally enhance the Montgomery ladder implementation
+ for `ec_scalar_mul_ladder` (formerly `ec_mul_consttime`) allowing
+ EC_METHODs to implement their own specialized "ladder step", to take
+ advantage of more favorable coordinate systems or more efficient
+ differential addition-and-doubling algorithms.
+ [Billy Bob Brumley, Sohaib ul Hassan, Nicola Tuveri]
+
+ *) Modified the random device based seed sources to keep the relevant
+ file descriptors open rather than reopening them on each access.
+ This allows such sources to operate in a chroot() jail without
+ the associated device nodes being available. This behaviour can be
+ controlled using RAND_keep_random_devices_open().
+ [Paul Dale]
*) Numerous side-channel attack mitigations have been applied. This may have
performance impacts for some algorithms for the benefit of improved
*) Support for TLSv1.3 added. Note that users upgrading from an earlier
version of OpenSSL should review their configuration settings to ensure
that they are still appropriate for TLSv1.3. For further information see:
- https://www.openssl.org/blog/blog/2018/02/08/tlsv1.3/
-
- NOTE: In this pre-release of OpenSSL a draft version of the
- TLSv1.3 standard has been implemented. Implementations of different draft
- versions of the standard do not inter-operate, and this version will not
- inter-operate with an implementation of the final standard when it is
- eventually published. Different pre-release versions may implement
- different versions of the draft. The final version of OpenSSL 1.1.1 will
- implement the final version of the standard.
- TODO(TLS1.3): Remove the above note before final release
+ https://wiki.openssl.org/index.php/TLS1.3
[Matt Caswell]
*) Grand redesign of the OpenSSL random generator
Some of its new features are:
o Support for multiple DRBG instances with seed chaining.
- o Add a public DRBG instance for the default RAND method.
- o Add a dedicated DRBG instance for generating long term private keys.
- o Make the DRBG instances fork-safe.
+ o The default RAND method makes use of a DRBG.
+ o There is a public and private DRBG instance.
+ o The DRBG instances are fork-safe.
o Keep all global DRBG instances on the secure heap if it is enabled.
- o Add a DRBG instance to every SSL instance for lock free operation
- and to increase unpredictability.
+ o The public and private DRBG instance are per thread for lock free
+ operation
[Paul Dale, Benjamin Kaduk, Kurt Roeckx, Rich Salz, Matthias St. Pierre]
*) Changed Configure so it only says what it does and doesn't dump
Changes between 1.1.0h and 1.1.0i [xx XXX xxxx]
+ *) Client DoS due to large DH parameter
+
+ During key agreement in a TLS handshake using a DH(E) based ciphersuite a
+ malicious server can send a very large prime value to the client. This will
+ cause the client to spend an unreasonably long period of time generating a
+ key for this prime resulting in a hang until the client has finished. This
+ could be exploited in a Denial Of Service attack.
+
+ This issue was reported to OpenSSL on 5th June 2018 by Guido Vranken
+ (CVE-2018-0732)
+ [Guido Vranken]
+
+ *) Cache timing vulnerability in RSA Key Generation
+
+ The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to
+ a cache timing side channel attack. An attacker with sufficient access to
+ mount cache timing attacks during the RSA key generation process could
+ recover the private key.
+
+ This issue was reported to OpenSSL on 4th April 2018 by Alejandro Cabrera
+ Aldaya, Billy Brumley, Cesar Pereida Garcia and Luis Manuel Alvarez Tapia.
+ (CVE-2018-0737)
+ [Billy Brumley]
+
+ *) Make EVP_PKEY_asn1_new() a bit stricter about its input. A NULL pem_str
+ parameter is no longer accepted, as it leads to a corrupt table. NULL
+ pem_str is reserved for alias entries only.
+ [Richard Levitte]
+
+ *) Revert blinding in ECDSA sign and instead make problematic addition
+ length-invariant. Switch even to fixed-length Montgomery multiplication.
+ [Andy Polyakov]
+
+ *) Change generating and checking of primes so that the error rate of not
+ being prime depends on the intended use based on the size of the input.
+ For larger primes this will result in more rounds of Miller-Rabin.
+ The maximal error rate for primes with more than 1080 bits is lowered
+ to 2^-128.
+ [Kurt Roeckx, Annie Yousar]
+
+ *) Increase the number of Miller-Rabin rounds for DSA key generating to 64.
+ [Kurt Roeckx]
+
+ *) Add blinding to ECDSA and DSA signatures to protect against side channel
+ attacks discovered by Keegan Ryan (NCC Group).
+ [Matt Caswell]
+
+ *) When unlocking a pass phrase protected PEM file or PKCS#8 container, we
+ now allow empty (zero character) pass phrases.
+ [Richard Levitte]
+
+ *) Certificate time validation (X509_cmp_time) enforces stricter
+ compliance with RFC 5280. Fractional seconds and timezone offsets
+ are no longer allowed.
+ [Emilia Käsper]
+
*) Fixed a text canonicalisation bug in CMS
Where a CMS detached signature is used with text content the text goes
*) A minor bug in ssl/s3_clnt.c where there would always be 4 0
bytes sent in the client random.
[Edward Bishop <ebishop@spyglass.com>]
-
projects / openssl.git / blobdiff