OpenSSL CHANGES
_______________
- Changes between 1.0.0d and 1.0.1 [xx XXX xxxx]
+ Changes between 1.0.0f and 1.0.1 [xx XXX xxxx]
+
+ *) Improved PRNG seeding for VOS.
+ [Paul Green <Paul.Green@stratus.com>]
+
+ *) Extensive assembler packs updates, most notably:
+
+ - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
+ - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
+ - x86_64: bit-sliced AES implementation;
+ - ARM: NEON support, contemporary platforms optimizations;
+ - s390x: z196 support;
+ - *: GHASH and GF(2^m) multiplication implementations;
+
+ [Andy Polyakov]
+
+ *) Make TLS-SRP code conformant with RFC 5054 API cleanup
+ (removal of unnecessary code)
+ [Peter Sylvester <peter.sylvester@edelweb.fr>]
+
+ *) Add TLS key material exporter from RFC 5705.
+ [Eric Rescorla]
+
+ *) Add DTLS-SRTP negotiation from RFC 5764.
+ [Eric Rescorla]
+
+ *) Add Next Protocol Negotiation,
+ http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
+ disabled with a no-npn flag to config or Configure. Code donated
+ by Google.
+ [Adam Langley <agl@google.com> and Ben Laurie]
+
+ *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
+ NIST-P256, NIST-P521, with constant-time single point multiplication on
+ typical inputs. Compiler support for the nonstandard type __uint128_t is
+ required to use this (present in gcc 4.4 and later, for 64-bit builds).
+ Code made available under Apache License version 2.0.
+
+ Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
+ line to include this in your build of OpenSSL, and run "make depend" (or
+ "make update"). This enables the following EC_METHODs:
+
+ EC_GFp_nistp224_method()
+ EC_GFp_nistp256_method()
+ EC_GFp_nistp521_method()
+
+ EC_GROUP_new_by_curve_name() will automatically use these (while
+ EC_GROUP_new_curve_GFp() currently prefers the more flexible
+ implementations).
+ [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
+
+ *) Use type ossl_ssize_t instad of ssize_t which isn't available on
+ all platforms. Move ssize_t definition from e_os.h to the public
+ header file e_os2.h as it now appears in public header file cms.h
+ [Steve Henson]
+
+ *) New -sigopt option to the ca, req and x509 utilities. Additional
+ signature parameters can be passed using this option and in
+ particular PSS.
+ [Steve Henson]
+
+ *) Add RSA PSS signing function. This will generate and set the
+ appropriate AlgorithmIdentifiers for PSS based on those in the
+ corresponding EVP_MD_CTX structure. No application support yet.
+ [Steve Henson]
+
+ *) Support for companion algorithm specific ASN1 signing routines.
+ New function ASN1_item_sign_ctx() signs a pre-initialised
+ EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
+ the appropriate parameters.
+ [Steve Henson]
+
+ *) Add new algorithm specific ASN1 verification initialisation function
+ to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
+ handling will be the same no matter what EVP_PKEY_METHOD is used.
+ Add a PSS handler to support verification of PSS signatures: checked
+ against a number of sample certificates.
+ [Steve Henson]
+
+ *) Add signature printing for PSS. Add PSS OIDs.
+ [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
+
+ *) Add algorithm specific signature printing. An individual ASN1 method
+ can now print out signatures instead of the standard hex dump.
+
+ More complex signatures (e.g. PSS) can print out more meaningful
+ information. Include DSA version that prints out the signature
+ parameters r, s.
+ [Steve Henson]
+
+ *) Password based recipient info support for CMS library: implementing
+ RFC3211.
+ [Steve Henson]
+
+ *) Split password based encryption into PBES2 and PBKDF2 functions. This
+ neatly separates the code into cipher and PBE sections and is required
+ for some algorithms that split PBES2 into separate pieces (such as
+ password based CMS).
+ [Steve Henson]
+
+ *) Session-handling fixes:
+ - Fix handling of connections that are resuming with a session ID,
+ but also support Session Tickets.
+ - Fix a bug that suppressed issuing of a new ticket if the client
+ presented a ticket with an expired session.
+ - Try to set the ticket lifetime hint to something reasonable.
+ - Make tickets shorter by excluding irrelevant information.
+ - On the client side, don't ignore renewed tickets.
+ [Adam Langley, Bodo Moeller (Google)]
+
+ *) Fix PSK session representation.
+ [Bodo Moeller]
+
+ *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
+
+ This work was sponsored by Intel.
+ [Andy Polyakov]
+
+ *) Add GCM support to TLS library. Some custom code is needed to split
+ the IV between the fixed (from PRF) and explicit (from TLS record)
+ portions. This adds all GCM ciphersuites supported by RFC5288 and
+ RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
+ add a special AESGCM string for GCM only.
+ [Steve Henson]
+
+ *) Expand range of ctrls for AES GCM. Permit setting invocation
+ field on decrypt and retrieval of invocation field only on encrypt.
+ [Steve Henson]
+
+ *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
+ As required by RFC5289 these ciphersuites cannot be used if for
+ versions of TLS earlier than 1.2.
+ [Steve Henson]
+
+ *) For FIPS capable OpenSSL interpret a NULL default public key method
+ as unset and return the appopriate default but do *not* set the default.
+ This means we can return the appopriate method in applications that
+ swicth between FIPS and non-FIPS modes.
+ [Steve Henson]
+
+ *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
+ ENGINE is used then we cannot handle that in the FIPS module so we
+ keep original code iff non-FIPS operations are allowed.
+ [Steve Henson]
+
+ *) Add -attime option to openssl utilities.
+ [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
+
+ *) Redirect DSA and DH operations to FIPS module in FIPS mode.
+ [Steve Henson]
+
+ *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
+ FIPS EC methods unconditionally for now.
+ [Steve Henson]
+
+ *) New build option no-ec2m to disable characteristic 2 code.
+ [Steve Henson]
+
+ *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
+ all cases can be covered as some introduce binary incompatibilities.
+ [Steve Henson]
+
+ *) Redirect RSA operations to FIPS module including keygen,
+ encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
+ [Steve Henson]
+
+ *) Add similar low level API blocking to ciphers.
+ [Steve Henson]
+
+ *) Low level digest APIs are not approved in FIPS mode: any attempt
+ to use these will cause a fatal error. Applications that *really* want
+ to use them can use the private_* version instead.
+ [Steve Henson]
*) Redirect cipher operations to FIPS module for FIPS builds.
[Steve Henson]
This should be configurable so applications can judge speed vs strength.
[Steve Henson]
- *) Add protection against ECDSA timing attacks as mentioned in the paper
- by Billy Bob Brumley and Nicola Tuveri, see:
-
- http://eprint.iacr.org/2011/232.pdf
-
- [Billy Bob Brumley and Nicola Tuveri]
-
*) Add TLS v1.2 server support for client authentication.
[Steve Henson]
SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
and version checking.
[Steve Henson]
-
+
*) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
with this defined it will not be affected by any changes to ssl internal
structures. Add several utility functions to allow openssl application
*) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
[Steve Henson]
- *) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
- elliptic curve NIST-P224 with constant-time single point multiplication on
- typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
- (while EC_GROUP_new_curve_GFp() currently won't and prefers the more
- flexible implementations).
-
- The implementation requires support for the nonstandard type __uint128_t,
- and so is disabled by default. To include this in your build of OpenSSL,
- use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
- and run "make depend" (or "make update").
- [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
-
*) Permit abbreviated handshakes when renegotiating using the function
SSL_renegotiate_abbreviated().
[Robin Seggelmann <seggelmann@fh-muenster.de>]
Add command line options to s_client/s_server.
[Steve Henson]
+ Changes between 1.0.0e and 1.0.0f [xx XXX xxxx]
+
+ *) Fix ssl_ciph.c set-up race.
+ [Adam Langley (Google)]
+
+ *) Fix spurious failures in ecdsatest.c.
+ [Emilia Käsper (Google)]
+
+ *) Fix the BIO_f_buffer() implementation (which was mixing different
+ interpretations of the '..._len' fields).
+ [Adam Langley (Google)]
+
+ *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+ BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+ threads won't reuse the same blinding coefficients.
+
+ This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+ lock to call BN_BLINDING_invert_ex, and avoids one use of
+ BN_BLINDING_update for each BN_BLINDING structure (previously,
+ the last update always remained unused).
+ [Emilia Käsper (Google)]
+
+ *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
+ [Bob Buckholz (Google)]
+
+ Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
+
+ *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
+ by initialising X509_STORE_CTX properly. (CVE-2011-3207)
+ [Kaspar Brand <ossl@velox.ch>]
+
+ *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+ for multi-threaded use of ECDH. (CVE-2011-3210)
+ [Adam Langley (Google)]
+
+ *) Fix x509_name_ex_d2i memory leak on bad inputs.
+ [Bodo Moeller]
+
+ *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
+ signature public key algorithm by using OID xref utilities instead.
+ Before this you could only use some ECC ciphersuites with SHA1 only.
+ [Steve Henson]
+
+ *) Add protection against ECDSA timing attacks as mentioned in the paper
+ by Billy Bob Brumley and Nicola Tuveri, see:
+
+ http://eprint.iacr.org/2011/232.pdf
+
+ [Billy Bob Brumley and Nicola Tuveri]
+
Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
*) Change 'Configure' script to enable Camellia by default.
[NTT]
+ Changes between 0.9.8r and 0.9.8s [xx XXX xxxx]
+
+ *) Fix ssl_ciph.c set-up race.
+ [Adam Langley (Google)]
+
+ *) Fix spurious failures in ecdsatest.c.
+ [Emilia Käsper (Google)]
+
+ *) Fix the BIO_f_buffer() implementation (which was mixing different
+ interpretations of the '..._len' fields).
+ [Adam Langley (Google)]
+
+ *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+ BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+ threads won't reuse the same blinding coefficients.
+
+ This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+ lock to call BN_BLINDING_invert_ex, and avoids one use of
+ BN_BLINDING_update for each BN_BLINDING structure (previously,
+ the last update always remained unused).
+ [Emilia Käsper (Google)]
+
+ *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+ for multi-threaded use of ECDH.
+ [Adam Langley (Google)]
+
+ *) Fix x509_name_ex_d2i memory leak on bad inputs.
+ [Bodo Moeller]
+
+ *) Add protection against ECDSA timing attacks as mentioned in the paper
+ by Billy Bob Brumley and Nicola Tuveri, see:
+
+ http://eprint.iacr.org/2011/232.pdf
+
+ [Billy Bob Brumley and Nicola Tuveri]
+
Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014