#!/bin/sh # Copyright 1998-2022 The OpenSSL Project Authors. All Rights Reserved. # # Licensed under the OpenSSL license (the "License"). You may not use # this file except in compliance with the License. You can obtain a copy # in the file LICENSE in the source distribution or at # https://www.openssl.org/source/license.html # OpenSSL config: determine the operating system and run ./Configure # Derived from minarch and GuessOS from Apache. # # Do "config -h" for usage information. SUFFIX="" DRYRUN="false" VERBOSE="false" EXE="" THERE=`dirname $0` # pick up any command line args to config for i do case "$i" in -d*) options=$options" --debug";; -t*) DRYRUN="true" VERBOSE="true";; -v*) VERBOSE="true";; -h*) DRYRUN="true"; cat </dev/null` || MACHINE="unknown" [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" # Now test for ISC and SCO, since it is has a braindamaged uname. # # We need to work around FreeBSD 1.1.5.1 ( XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` if [ "x$XREL" != "x" ]; then if [ -f /etc/kconfig ]; then case "$XREL" in 4.0|4.1) echo "${MACHINE}-whatever-isc4"; exit 0 ;; esac else case "$XREL" in 3.2v4.2) echo "whatever-whatever-sco3"; exit 0 ;; 3.2v5.0*) echo "whatever-whatever-sco5"; exit 0 ;; 4.2MP) case "x${VERSION}" in x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; x2*) echo "whatever-whatever-unixware2"; exit 0 ;; esac ;; 4.2) echo "whatever-whatever-unixware1"; exit 0 ;; 5*) case "x${VERSION}" in # We hardcode i586 in place of ${MACHINE} for the # following reason. The catch is that even though Pentium # is minimum requirement for platforms in question, # ${MACHINE} gets always assigned to i386. Now, problem # with i386 is that it makes ./config pass 386 to # ./Configure, which in turn makes make generate # inefficient SHA-1 (for this moment) code. x[678]*) echo "i586-sco-unixware7"; exit 0 ;; esac ;; esac fi fi # Now we simply scan though... In most cases, the SYSTEM info is enough # case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in A/UX:*) echo "m68k-apple-aux3"; exit 0 ;; AIX:[3-9]:4:*) echo "${MACHINE}-ibm-aix"; exit 0 ;; AIX:*:[5-9]:*) echo "${MACHINE}-ibm-aix"; exit 0 ;; AIX:*) echo "${MACHINE}-ibm-aix3"; exit 0 ;; HI-UX:*) echo "${MACHINE}-hi-hiux"; exit 0 ;; HP-UX:*) HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "$HPUXVER" in 1[0-9].*) # HPUX 10 and 11 targets are unified echo "${MACHINE}-hp-hpux1x"; exit 0 ;; *) echo "${MACHINE}-hp-hpux"; exit 0 ;; esac ;; IRIX:6.*) echo "mips3-sgi-irix"; exit 0 ;; IRIX64:*) echo "mips4-sgi-irix64"; exit 0 ;; Linux:[2-9].*) echo "${MACHINE}-whatever-linux2"; exit 0 ;; Linux:1.*) echo "${MACHINE}-whatever-linux1"; exit 0 ;; GNU*) echo "hurd-x86"; exit 0; ;; LynxOS:*) echo "${MACHINE}-lynx-lynxos"; exit 0 ;; BSD/OS:4.*) # BSD/OS always says 386 echo "i486-whatever-bsdi4"; exit 0 ;; BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) case `/sbin/sysctl -n hw.model` in Pentium*) echo "i586-whatever-bsdi"; exit 0 ;; *) echo "i386-whatever-bsdi"; exit 0 ;; esac; ;; BSD/386:*|BSD/OS:*) echo "${MACHINE}-whatever-bsdi"; exit 0 ;; FreeBSD:*:*:*386*) VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` MACH=`sysctl -n hw.model` ARCH='whatever' case ${MACH} in *386* ) MACH="i386" ;; *486* ) MACH="i486" ;; Pentium\ II*) MACH="i686" ;; Pentium* ) MACH="i586" ;; * ) MACH="$MACHINE" ;; esac case ${MACH} in i[0-9]86 ) ARCH="pc" ;; esac echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 ;; DragonFly:*) echo "${MACHINE}-whatever-dragonfly"; exit 0 ;; FreeBSD:*) echo "${MACHINE}-whatever-freebsd"; exit 0 ;; Haiku:*) echo "${MACHINE}-whatever-haiku"; exit 0 ;; NetBSD:*:*:*386*) echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 ;; NetBSD:*) echo "${MACHINE}-whatever-netbsd"; exit 0 ;; OpenBSD:*) echo "${MACHINE}-whatever-openbsd"; exit 0 ;; OpenUNIX:*) echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 ;; OSF1:*:*:*alpha*) OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` case "$OSFMAJOR" in 4|5) echo "${MACHINE}-dec-tru64"; exit 0 ;; 1|2|3) echo "${MACHINE}-dec-osf"; exit 0 ;; *) echo "${MACHINE}-dec-osf"; exit 0 ;; esac ;; Paragon*:*:*:*) echo "i860-intel-osf1"; exit 0 ;; Rhapsody:*) echo "ppc-apple-rhapsody"; exit 0 ;; Darwin:*) case "$MACHINE" in Power*) echo "ppc-apple-darwin${VERSION}" ;; *) echo "${MACHINE}-apple-darwin${VERSION}" ;; esac exit 0 ;; SunOS:5.*) echo "${MACHINE}-whatever-solaris2"; exit 0 ;; SunOS:*) echo "${MACHINE}-sun-sunos4"; exit 0 ;; UNIX_System_V:4.*:*) echo "${MACHINE}-whatever-sysv4"; exit 0 ;; VOS:*:*:i786) echo "i386-stratus-vos"; exit 0 ;; VOS:*:*:*) echo "hppa1.1-stratus-vos"; exit 0 ;; *:4*:R4*:m88k) echo "${MACHINE}-whatever-sysv4"; exit 0 ;; DYNIX/ptx:4*:*) echo "${MACHINE}-whatever-sysv4"; exit 0 ;; *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) echo "i486-ncr-sysv4"; exit 0 ;; ULTRIX:*) echo "${MACHINE}-unknown-ultrix"; exit 0 ;; POSIX-BC*) echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" ;; machten:*) echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; ;; library:*) echo "${MACHINE}-ncr-sysv4"; exit 0 ;; ConvexOS:*:11.0:*) echo "${MACHINE}-v11-${SYSTEM}"; exit 0; ;; # The following combinations are supported # MINGW64* on x86_64 => mingw64 # MINGW32* on x86_64 => mingw # MINGW32* on i?86 => mingw # # MINGW64* on i?86 isn't expected to work... MINGW64*:*:*:x86_64) echo "${MACHINE}-whatever-mingw64"; exit 0; ;; MINGW*) echo "${MACHINE}-whatever-mingw"; exit 0; ;; CYGWIN*) echo "${MACHINE}-pc-cygwin"; exit 0 ;; vxworks*) echo "${MACHINE}-whatever-vxworks"; exit 0; ;; esac # # Ugg. These are all we can determine by what we know about # the output of uname. Be more creative: # # Do the Apollo stuff first. Here, we just simply assume # that the existence of the /usr/apollo directory is proof # enough if [ -d /usr/apollo ]; then echo "whatever-apollo-whatever" exit 0 fi # Now NeXT ISNEXT=`hostinfo 2>/dev/null` case "$ISNEXT" in *'NeXT Mach 3.3'*) echo "whatever-next-nextstep3.3"; exit 0 ;; *NeXT*) echo "whatever-next-nextstep"; exit 0 ;; esac # At this point we gone through all the one's # we know of: Punt echo "${MACHINE}-whatever-${SYSTEM}" exit 0 ) 2>/dev/null | ( # --------------------------------------------------------------------------- # this is where the translation occurs into SSLeay terms # --------------------------------------------------------------------------- # Only set CC if not supplied already if [ -z "$CROSS_COMPILE$CC" ]; then GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null` if [ "$GCCVER" != "" ]; then # then strip off whatever prefix egcs prepends the number with... # Hopefully, this will work for any future prefixes as well. GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion # does give us what we want though, so we use that. We just just the # major and minor version numbers. # peak single digit before and after first dot, e.g. 2.95.1 gives 29 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` CC=gcc else CC=cc fi fi GCCVER=${GCCVER:-0} if [ "$SYSTEM" = "HP-UX" ];then # By default gcc is a ILP32 compiler (with long long == 64). GCC_BITS="32" if [ $GCCVER -ge 30 ]; then # PA64 support only came in with gcc 3.0.x. # We check if the preprocessor symbol __LP64__ is defined... if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then : # __LP64__ has slipped through, it therefore is not defined else GCC_BITS="64" fi fi fi if [ "$SYSTEM" = "SunOS" ]; then if [ $GCCVER -ge 30 ]; then # 64-bit ABI isn't officially supported in gcc 3.0, but it appears # to be working, at the very least 'make test' passes... if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then GCC_ARCH="-m64" else GCC_ARCH="-m32" fi fi # check for WorkShop C, expected output is "cc: blah-blah C x.x" CCVER=`(cc -V 2>&1) 2>/dev/null | \ egrep -e '^cc: .* C [0-9]\.[0-9]' | \ sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` CCVER=${CCVER:-0} if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then CC=cc # overrides gcc!!! if [ $CCVER -eq 50 ]; then echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" echo " patch #107357-01 or later applied." sleep 5 fi fi fi if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc fi CCVER=${CCVER:-0} # read the output of the embedded GuessOS read GUESSOS echo Operating system: $GUESSOS # now map the output into SSLeay terms ... really should hack into the # script above so we end up with values in vars but that would take # more time that I want to waste at the moment case "$GUESSOS" in uClinux*64*) OUT=uClinux-dist64 ;; uClinux*) OUT=uClinux-dist ;; mips3-sgi-irix) OUT="irix-mips3-$CC" ;; mips4-sgi-irix64) echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure irix64-mips4-$CC' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi OUT="irix-mips3-$CC" ;; ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; ppc-apple-darwin*) ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null` if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure darwin64-ppc-cc' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi fi if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then OUT="darwin64-ppc-cc" else OUT="darwin-ppc-cc" fi ;; i?86-apple-darwin*) ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null` if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke 'KERNEL_BITS=64 $THERE/config $options'." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 1" 2; stty -icanon min 0 time 50; read waste; exit 0) <&1 || exit fi fi if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then OUT="darwin64-x86_64-cc" else OUT="darwin-i386-cc" fi ;; x86_64-apple-darwin*) if [ "$KERNEL_BITS" = "32" ]; then OUT="darwin-i386-cc" else OUT="darwin64-x86_64-cc" fi ;; $MACHINE-apple-darwin*) OUT="darwin64-$MACHINE-cc" ;; armv6+7-*-iphoneos) __CNF_CFLAGS="$__CNF_CFLAGS -arch armv6 -arch armv7" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -arch armv6 -arch armv7" OUT="iphoneos-cross" ;; *-*-iphoneos) __CNF_CFLAGS="$__CNF_CFLAGS -arch ${MACHINE}" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -arch ${MACHINE}" OUT="iphoneos-cross" ;; arm64-*-iphoneos|*-*-ios64) OUT="ios64-cross" ;; alpha-*-linux2) ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` OUT="linux-alpha-$CC" if [ "$CC" = "gcc" ]; then case ${ISA:-generic} in EV5|EV45) __CNF_CFLAGS="$__CNF_CFLAGS -mcpu=ev5" __CNF_CXXFLAGS="$__CNF_CFLAGS -mcpu=ev5";; EV56|PCA56) __CNF_CFLAGS="$__CNF_CFLAGS -mcpu=ev56" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -mcpu=ev56";; *) __CNF_CFLAGS="$__CNF_CFLAGS -mcpu=ev6" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -mcpu=ev6";; esac fi ;; ppc64-*-linux2) if [ -z "$KERNEL_BITS" ]; then echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure linux-ppc64' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi fi if [ "$KERNEL_BITS" = "64" ]; then OUT="linux-ppc64" else OUT="linux-ppc" if (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null); then :; else __CNF_CFLAGS="$__CNF_CFLAGS -m32" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -m32" fi fi ;; ppc64le-*-linux2) OUT="linux-ppc64le" ;; ppc-*-linux2) OUT="linux-ppc" ;; mips64*-*-linux2) echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure linux64-mips64' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi OUT="linux-mips64" ;; mips*-*-linux2) OUT="linux-mips32" ;; ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;; ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;; pentium-*-vxworks*) OUT="vxworks-pentium" ;; simlinux-*-vxworks*) OUT="vxworks-simlinux" ;; mips-*-vxworks*) OUT="vxworks-mips";; ia64-*-linux?) OUT="linux-ia64" ;; sparc64-*-linux2) echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" echo " and wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure linux64-sparcv9' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi OUT="linux-sparcv9" ;; sparc-*-linux2) KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` case ${KARCH:-sun4} in sun4u*) OUT="linux-sparcv9" ;; sun4m) OUT="linux-sparcv8" ;; sun4d) OUT="linux-sparcv8" ;; *) OUT="linux-generic32"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DB_ENDIAN" ;; esac ;; parisc*-*-linux2) # 64-bit builds under parisc64 linux are not supported and # compiler is expected to generate 32-bit objects... CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` # ??TODO ?? Model transformations # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off # assuming no further arch. identification will ever be used by GCC. # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers # for these chips in the future. # PA7300LC -> 7100LC (1.1) # PA8200 -> 8000 (2.0) # PA8500 -> 8000 (2.0) # PA8600 -> 8000 (2.0) CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` # Finish Model transformations __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DB_ENDIAN" __CNF_CFLAGS="$__CNF_CFLAGS -mschedule=$CPUSCHEDULE -march=$CPUARCH" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -mschedule=$CPUSCHEDULE -march=$CPUARCH" OUT="linux-generic32" ;; armv[1-3]*-*-linux2) OUT="linux-generic32" ;; armv[7-9]*-*-linux2) OUT="linux-armv4" __CNF_CFLAGS="$__CNF_CFLAGS -march=armv7-a" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -march=armv7-a" ;; arm*-*-linux2) OUT="linux-armv4" ;; aarch64-*-linux2) OUT="linux-aarch64" ;; sh*b-*-linux2) OUT="linux-generic32"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DB_ENDIAN" ;; sh*-*-linux2) OUT="linux-generic32"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DL_ENDIAN" ;; m68k*-*-linux2) OUT="linux-generic32"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DB_ENDIAN" ;; s390-*-linux2) OUT="linux-generic32"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DB_ENDIAN" ;; s390x-*-linux2) # To be uncommented when glibc bug is fixed, see Configure... #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you" # echo " have to invoke './Configure linux32-s390x' *manually*." # if [ "$DRYRUN" = "false" -a -t -1 ]; then # echo " You have about 5 seconds to press Ctrl-C to abort." # (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 # fi #fi OUT="linux64-s390x" ;; x86_64-*-linux?) if $CC -dM -E -x c /dev/null 2>&1 | grep -q ILP32 > /dev/null; then OUT="linux-x32" else OUT="linux-x86_64" fi ;; *86-*-linux2) # On machines where the compiler understands -m32, prefer a # config target that uses it if $CC -m32 -E -x c /dev/null > /dev/null 2>&1; then OUT="linux-x86" else OUT="linux-elf" fi ;; *86-*-linux1) OUT="linux-aout" ;; *-*-linux?) OUT="linux-generic32" ;; sun4[uv]*-*-solaris2) OUT="solaris-sparcv9-$CC" ISA64=`(isainfo) 2>/dev/null | grep sparcv9` if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure solaris64-sparcv9-cc' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then # $GCC_ARCH denotes default ABI chosen by compiler driver # (first one found on the $PATH). I assume that user # expects certain consistency with the rest of his builds # and therefore switch over to 64-bit. OUT="solaris64-sparcv9-gcc" echo "WARNING! If you wish to build 32-bit library, then you have to" echo " invoke '$THERE/Configure solaris-sparcv9-gcc' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi elif [ "$GCC_ARCH" = "-m32" ]; then echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" echo " and wish to build 64-bit library, then you have to" echo " invoke '$THERE/Configure solaris64-sparcv9-gcc' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi fi fi if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then OUT="solaris64-sparcv9-$CC" fi ;; sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; *86*-*-solaris2) ISA64=`(isainfo) 2>/dev/null | grep amd64` if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then OUT="solaris64-x86_64-$CC" else OUT="solaris-x86-$CC" if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then options="$options no-sse2" fi fi ;; *-*-sunos4) OUT="sunos-$CC" ;; *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2"; __CNF_LDFLAGS="$__CNF_LDFLAGS -ldl" ;; alpha*-*-*bsd*) OUT="BSD-generic64"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DL_ENDIAN" ;; powerpc64-*-*bsd*) OUT="BSD-generic64"; __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DB_ENDIAN" ;; riscv64-*-*bsd*) OUT="BSD-riscv64" ;; sparc64-*-*bsd*) OUT="BSD-sparc64" ;; ia64-*-*bsd*) OUT="BSD-ia64" ;; x86_64-*-dragonfly*) OUT="BSD-x86_64" ;; amd64-*-*bsd*) OUT="BSD-x86_64" ;; arm64-*-*bsd*) OUT="BSD-aarch64" ;; *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD libc=/usr/lib/libc.so else # OpenBSD # ld searches for highest libc.so.* and so do we libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null` fi case "`(file -L $libc) 2>/dev/null`" in *ELF*) OUT="BSD-x86-elf" ;; *) OUT="BSD-x86"; options="$options no-sse2" ;; esac ;; *-*-*bsd*) OUT="BSD-generic32" ;; x86_64-*-haiku) OUT="haiku-x86_64" ;; *-*-haiku) OUT="haiku-x86" ;; *-*-osf) OUT="osf1-alpha-cc" ;; *-*-tru64) OUT="tru64-alpha-cc" ;; *-*-[Uu]nix[Ww]are7) if [ "$CC" = "gcc" ]; then OUT="unixware-7-gcc" ; options="$options no-sse2" else OUT="unixware-7" ; options="$options no-sse2" __CNF_CPPFLAGS="$__CNF_CPPFLAGS -D__i386__" fi ;; *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; *-*-vos) options="$options no-threads no-shared no-asm no-dso" EXE=".pm" OUT="vos-$CC" ;; BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; *-hpux1*) if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then OUT="hpux64-parisc2-gcc" fi [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` KERNEL_BITS=${KERNEL_BITS:-32} CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` CPU_VERSION=${CPU_VERSION:-0} # See for further info on CPU_VERSION. if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then OUT="hpux64-ia64-cc" else OUT="hpux-ia64-cc" fi elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU # PA-RISC 2.0 is no longer supported as separate 32-bit # target. This is compensated for by run-time detection # in most critical assembly modules and taking advantage # of 2.0 architecture in PA-RISC 1.1 build. OUT=${OUT:-"hpux-parisc1_1-${CC}"} if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then echo "WARNING! If you wish to build 64-bit library then you have to" echo " invoke '$THERE/Configure hpux64-parisc2-cc' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have about 5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi fi elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU OUT="hpux-parisc1_1-${CC}" elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU OUT="hpux-parisc-${CC}" else # Motorola(?) CPU OUT="hpux-$CC" fi __CNF_CPPFLAGS="$__CNF_CPPFLAGS -D_REENTRANT" ;; *-hpux) OUT="hpux-parisc-$CC" ;; *-aix) [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` KERNEL_BITS=${KERNEL_BITS:-32} OBJECT_MODE=${OBJECT_MODE:-32} if [ "$CC" = "gcc" ]; then OUT="aix-gcc" if [ $OBJECT_MODE -eq 64 ]; then echo 'Your $OBJECT_MODE was found to be set to 64' OUT="aix64-gcc" fi elif [ $OBJECT_MODE -eq 64 ]; then echo 'Your $OBJECT_MODE was found to be set to 64' OUT="aix64-cc" else OUT="aix-cc" if [ $KERNEL_BITS -eq 64 ]; then echo "WARNING! If you wish to build 64-bit kit, then you have to" echo " invoke '$THERE/Configure aix64-cc' *manually*." if [ "$DRYRUN" = "false" -a -t 1 ]; then echo " You have ~5 seconds to press Ctrl-C to abort." (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 fi fi fi if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then : # this applies even to Power3 and later, as they return PowerPC_POWER[345] else options="$options no-asm" fi ;; # these are all covered by the catchall below i[3456]86-*-cygwin) OUT="Cygwin-x86" ;; *-*-cygwin) OUT="Cygwin-${MACHINE}" ;; x86-*-android|i?86-*-android) OUT="android-x86" ;; armv[7-9]*-*-android) OUT="android-armeabi" __CNF_CFLAGS="$__CNF_CFLAGS -march=armv7-a" __CNF_CXXFLAGS="$__CNF_CXXFLAGS -march=armv7-a";; arm*-*-android) OUT="android-armeabi" ;; *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; esac # NB: This atalla support has been superseded by the ENGINE support # That contains its own header and definitions anyway. Support can # be enabled or disabled on any supported platform without external # headers, eg. by adding the "hw-atalla" switch to ./config or # perl Configure # # See whether we can compile Atalla support #if [ -f /usr/include/atasi.h ] #then # __CNF_CPPFLAGS="$__CNF_CPPFLAGS -DATALLA" #fi if [ -n "$CONFIG_OPTIONS" ]; then options="$options $CONFIG_OPTIONS" fi # gcc < 2.8 does not support -march=ultrasparc if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] then echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." echo " Upgrade to gcc-2.8 or later." sleep 5 OUT=solaris-sparcv8-gcc fi if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] then echo "WARNING! Falling down to 'linux-sparcv8'." echo " Upgrade to gcc-2.8 or later." sleep 5 OUT=linux-sparcv8 fi case "$GUESSOS" in i386-*) options="$options 386" ;; esac for i in aes aria bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha sm2 sm3 sm4 do if [ ! -d $THERE/crypto/$i ] then options="$options no-$i" fi done if [ -z "$OUT" ]; then OUT="$CC" fi if [ ".$PERL" = . ] ; then for i in . `echo $PATH | sed 's/:/ /g'`; do if [ -f "$i/perl5$EXE" ] ; then PERL="$i/perl5$EXE" break; fi; done fi if [ ".$PERL" = . ] ; then for i in . `echo $PATH | sed 's/:/ /g'`; do if [ -f "$i/perl$EXE" ] ; then if "$i/perl$EXE" -e 'exit($]<5.0)'; then PERL="$i/perl$EXE" break; fi; fi; done fi if [ ".$PERL" = . ] ; then echo "You need Perl 5." exit 1 fi # run Configure to check to see if we need to specify the # compiler for the platform ... in which case we add it on # the end ... otherwise we leave it off $PERL $THERE/Configure LIST | grep "$OUT-$CC" > /dev/null if [ $? = "0" ]; then OUT="$OUT-$CC" fi OUT="$OUT" if [ "$OUT" = "darwin64-x86_64-cc" ]; then echo "WARNING! If you wish to build 32-bit libraries, then you have to" echo " invoke 'KERNEL_BITS=32 $THERE/config $options'." fi if $PERL $THERE/Configure LIST | grep "$OUT" > /dev/null; then if [ "$VERBOSE" = "true" ]; then echo /usr/bin/env \ __CNF_CPPDEFINES="'$__CNF_CPPDEFINES'" \ __CNF_CPPINCLUDES="'$__CNF_CPPINCLUDES'" \ __CNF_CPPFLAGS="'$__CNF_CPPFLAGS'" \ __CNF_CFLAGS="'$__CNF_CFLAGS'" \ __CNF_CXXFLAGS="'$__CNF_CXXFLAGS'" \ __CNF_LDFLAGS="'$__CNF_LDFLAGS'" \ __CNF_LDLIBS="'$__CNF_LDLIBS'" \ $PERL $THERE/Configure $OUT $options fi if [ "$DRYRUN" = "false" ]; then # eval to make sure quoted options, possibly with spaces inside, # are treated right eval /usr/bin/env \ __CNF_CPPDEFINES="'$__CNF_CPPDEFINES'" \ __CNF_CPPINCLUDES="'$__CNF_CPPINCLUDES'" \ __CNF_CPPFLAGS="'$__CNF_CPPFLAGS'" \ __CNF_CFLAGS="'$__CNF_CFLAGS'" \ __CNF_CXXFLAGS="'$__CNF_CXXFLAGS'" \ __CNF_LDFLAGS="'$__CNF_LDFLAGS'" \ __CNF_LDLIBS="'$__CNF_LDLIBS'" \ $PERL $THERE/Configure $OUT $options fi else echo "This system ($OUT) is not supported. See file INSTALL for details." exit 1 fi # Do not add anothing from here on, so we don't lose the Configure exit code )