bn/asm/x86_64-mont5.pl: fix carry propagating bug (CVE-2015-3193).
[openssl.git] / test / times
1
2 More number for the questions about SSL overheads....
3
4 The following numbers were generated on a Pentium pro 200, running Linux.
5 They give an indication of the SSL protocol and encryption overheads.
6
7 The program that generated them is an unreleased version of ssl/ssltest.c
8 which is the SSLeay ssl protocol testing program.  It is a single process that
9 talks both sides of the SSL protocol via a non-blocking memory buffer
10 interface.
11
12 How do I read this?  The protocol and cipher are reasonable obvious.
13 The next number is the number of connections being made.  The next is the
14 number of bytes exchanged between the client and server side of the protocol.
15 This is the number of bytes that the client sends to the server, and then
16 the server sends back.  Because this is all happening in one process,
17 the data is being encrypted, decrypted, encrypted and then decrypted again.
18 It is a round trip of that many bytes.  Because the one process performs
19 both the client and server sides of the protocol and it sends this many bytes
20 each direction, multiply this number by 4 to generate the number
21 of bytes encrypted/decrypted/MACed.  The first time value is how many seconds
22 elapsed doing a full SSL handshake, the second is the cost of one
23 full handshake and the rest being session-id reuse.
24
25 SSLv2 RC4-MD5      1000 x      1   12.83s   0.70s
26 SSLv3 NULL-MD5     1000 x      1   14.35s   1.47s
27 SSLv3 RC4-MD5      1000 x      1   14.46s   1.56s
28 SSLv3 RC4-MD5      1000 x      1   51.93s   1.62s 1024bit RSA
29 SSLv3 RC4-SHA      1000 x      1   14.61s   1.83s
30 SSLv3 DES-CBC-SHA  1000 x      1   14.70s   1.89s
31 SSLv3 DES-CBC3-SHA 1000 x      1   15.16s   2.16s
32
33 SSLv2 RC4-MD5      1000 x   1024   13.72s   1.27s
34 SSLv3 NULL-MD5     1000 x   1024   14.79s   1.92s
35 SSLv3 RC4-MD5      1000 x   1024   52.58s   2.29s 1024bit RSA
36 SSLv3 RC4-SHA      1000 x   1024   15.39s   2.67s
37 SSLv3 DES-CBC-SHA  1000 x   1024   16.45s   3.55s
38 SSLv3 DES-CBC3-SHA 1000 x   1024   18.21s   5.38s
39
40 SSLv2 RC4-MD5      1000 x  10240   18.97s   6.52s
41 SSLv3 NULL-MD5     1000 x  10240   17.79s   5.11s
42 SSLv3 RC4-MD5      1000 x  10240   20.25s   7.90s
43 SSLv3 RC4-MD5      1000 x  10240   58.26s   8.08s 1024bit RSA
44 SSLv3 RC4-SHA      1000 x  10240   22.96s  11.44s
45 SSLv3 DES-CBC-SHA  1000 x  10240   30.65s  18.41s
46 SSLv3 DES-CBC3-SHA 1000 x  10240   47.04s  34.53s
47
48 SSLv2 RC4-MD5      1000 x 102400   70.22s  57.74s
49 SSLv3 NULL-MD5     1000 x 102400   43.73s  31.03s
50 SSLv3 RC4-MD5      1000 x 102400   71.32s  58.83s
51 SSLv3 RC4-MD5      1000 x 102400  109.66s  59.20s 1024bit RSA
52 SSLv3 RC4-SHA      1000 x 102400   95.88s  82.21s
53 SSLv3 DES-CBC-SHA  1000 x 102400  173.22s 160.55s
54 SSLv3 DES-CBC3-SHA 1000 x 102400  336.61s 323.82s
55
56 What does this all mean?  Well for a server, with no session-id reuse, with
57 a transfer size of 10240 bytes, using RC4-MD5 and a 512bit server key,
58 a Pentium pro 200 running Linux can handle the SSLv3 protocol overheads of
59 about 49 connections a second.  Reality will be quite different :-).
60
61 Remember the first number is 1000 full ssl handshakes, the second is
62 1 full and 999 with session-id reuse.  The RSA overheads for each exchange
63 would be one public and one private operation, but the protocol/MAC/cipher
64 cost would be quite similar in both the client and server.
65
66 eric (adding numbers to speculation)
67
68 --- Appendix ---
69 - The time measured is user time but these number a very rough.
70 - Remember this is the cost of both client and server sides of the protocol.
71 - The TCP/kernel overhead of connection establishment is normally the
72   killer in SSL.  Often delays in the TCP protocol will make session-id
73   reuse look slower that new sessions, but this would not be the case on
74   a loaded server.
75 - The TCP round trip latencies, while slowing individual connections,
76   would have minimal impact on throughput.
77 - Instead of sending one 102400 byte buffer, one 8k buffer is sent until
78 - the required number of bytes are processed.
79 - The SSLv3 connections were actually SSLv2 compatible SSLv3 headers.
80 - A 512bit server key was being used except where noted.
81 - No server key verification was being performed on the client side of the
82   protocol.  This would slow things down very little.
83 - The library being used is SSLeay 0.8.x.
84 - The normal measuring system was commands of the form
85   time ./ssltest -num 1000 -bytes 102400 -cipher DES-CBC-SHA -reuse
86   This modified version of ssltest should be in the next public release of
87   SSLeay.
88
89 The general cipher performance number for this platform are
90
91 SSLeay 0.8.2a 04-Sep-1997
92 built on Fri Sep  5 17:37:05 EST 1997
93 options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) idea(int) blowfish(ptr2)
94 C flags:gcc -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized 
95 The 'numbers' are in 1000s of bytes per second processed.
96 type              8 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
97 md2               131.02k      368.41k      500.57k      549.21k      566.09k
98 mdc2              535.60k      589.10k      595.88k      595.97k      594.54k
99 md5              1801.53k     9674.77k    17484.03k    21849.43k    23592.96k
100 sha              1261.63k     5533.25k     9285.63k    11187.88k    11913.90k
101 sha1             1103.13k     4782.53k     7933.78k     9472.34k    10070.70k
102 rc4             10722.53k    14443.93k    15215.79k    15299.24k    15219.59k
103 des cbc          3286.57k     3827.73k     3913.39k     3931.82k     3926.70k
104 des ede3         1443.50k     1549.08k     1561.17k     1566.38k     1564.67k
105 idea cbc         2203.64k     2508.16k     2538.33k     2543.62k     2547.71k
106 rc2 cbc          1430.94k     1511.59k     1524.82k     1527.13k     1523.33k
107 blowfish cbc     4716.07k     5965.82k     6190.17k     6243.67k     6234.11k
108                   sign    verify
109 rsa  512 bits   0.0100s   0.0011s
110 rsa 1024 bits   0.0451s   0.0012s
111 rsa 2048 bits   0.2605s   0.0086s
112 rsa 4096 bits   1.6883s   0.0302s
113