Add a GOST test
[openssl.git] / test / recipes / 80-test_tsa.t
1 #! /usr/bin/env perl
2 # Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
3 #
4 # Licensed under the OpenSSL license (the "License").  You may not use
5 # this file except in compliance with the License.  You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
8
9
10 use strict;
11 use warnings;
12
13 use POSIX;
14 use File::Spec::Functions qw/splitdir curdir catfile/;
15 use File::Compare;
16 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file/;
17 use OpenSSL::Test::Utils;
18
19 setup("test_tsa");
20
21 plan skip_all => "TS is not supported by this OpenSSL build"
22     if disabled("ts");
23
24 # All these are modified inside indir further down. They need to exist
25 # here, however, to be available in all subroutines.
26 my $openssl_conf;
27 my $testtsa;
28 my $CAtsa;
29 my @RUN;
30
31 sub create_tsa_cert {
32     my $INDEX = shift;
33     my $EXT = shift;
34     my $r = 1;
35     $ENV{TSDNSECT} = "ts_cert_dn";
36
37     ok(run(app(["openssl", "req", "-config", $openssl_conf, "-new",
38                 "-out", "tsa_req${INDEX}.pem",
39                 "-keyout", "tsa_key${INDEX}.pem"])));
40     note "using extension $EXT";
41     ok(run(app(["openssl", "x509", "-req",
42                 "-in", "tsa_req${INDEX}.pem",
43                 "-out", "tsa_cert${INDEX}.pem",
44                 "-CA", "tsaca.pem", "-CAkey", "tsacakey.pem",
45                 "-CAcreateserial",
46                 "-extfile", $openssl_conf, "-extensions", $EXT])));
47 }
48
49 sub create_time_stamp_response {
50     my $queryfile = shift;
51     my $outputfile = shift;
52     my $datafile = shift;
53
54     ok(run(app([@RUN, "-reply", "-section", "$datafile",
55                 "-queryfile", "$queryfile", "-out", "$outputfile"])));
56 }
57
58 sub verify_time_stamp_response {
59     my $queryfile = shift;
60     my $inputfile = shift;
61     my $datafile = shift;
62
63     ok(run(app([@RUN, "-verify", "-queryfile", "$queryfile",
64                 "-in", "$inputfile", "-CAfile", "tsaca.pem",
65                 "-untrusted", "tsa_cert1.pem"])));
66     ok(run(app([@RUN, "-verify", "-data", "$datafile",
67                 "-in", "$inputfile", "-CAfile", "tsaca.pem",
68                 "-untrusted", "tsa_cert1.pem"])));
69 }
70
71 sub verify_time_stamp_response_fail {
72     my $queryfile = shift;
73     my $inputfile = shift;
74
75     ok(!run(app([@RUN, "-verify", "-queryfile", "$queryfile",
76                  "-in", "$inputfile", "-CAfile", "tsaca.pem",
77                  "-untrusted", "tsa_cert1.pem"])));
78 }
79
80 # main functions
81
82 plan tests => 20;
83
84 note "setting up TSA test directory";
85 indir "tsa" => sub
86 {
87     $openssl_conf = srctop_file("test", "CAtsa.cnf");
88     $testtsa = srctop_file("test", "recipes", "80-test_tsa.t");
89     $CAtsa = srctop_file("test", "CAtsa.cnf");
90     @RUN = ("openssl", "ts", "-config", $openssl_conf);
91
92     # ../apps/CA.pl needs these
93     $ENV{OPENSSL_CONFIG} = "-config $openssl_conf";
94     $ENV{OPENSSL} = cmdstr(app(["openssl"]), display => 1);
95
96  SKIP: {
97      $ENV{TSDNSECT} = "ts_ca_dn";
98      skip "failed", 19
99          unless ok(run(app(["openssl", "req", "-config", $openssl_conf,
100                             "-new", "-x509", "-nodes",
101                             "-out", "tsaca.pem", "-keyout", "tsacakey.pem"])),
102                    'creating a new CA for the TSA tests');
103
104      skip "failed", 18
105          unless subtest 'creating tsa_cert1.pem TSA server cert' => sub {
106              create_tsa_cert("1", "tsa_cert")
107      };
108
109      skip "failed", 17
110          unless subtest 'creating tsa_cert2.pem non-TSA server cert' => sub {
111              create_tsa_cert("2", "non_tsa_cert")
112      };
113
114      skip "failed", 16
115          unless ok(run(app([@RUN, "-query", "-data", $testtsa,
116                             "-tspolicy", "tsa_policy1", "-cert",
117                             "-out", "req1.tsq"])),
118                    'creating req1.req time stamp request for file testtsa');
119
120      ok(run(app([@RUN, "-query", "-in", "req1.tsq", "-text"])),
121         'printing req1.req');
122
123      subtest 'generating valid response for req1.req' => sub {
124          create_time_stamp_response("req1.tsq", "resp1.tsr", "tsa_config1")
125      };
126
127      ok(run(app([@RUN, "-reply", "-in", "resp1.tsr", "-text"])),
128         'printing response');
129
130      subtest 'verifying valid response' => sub {
131          verify_time_stamp_response("req1.tsq", "resp1.tsr", $testtsa)
132      };
133
134      skip "failed", 11
135          unless subtest 'verifying valid token' => sub {
136              ok(run(app([@RUN, "-reply", "-in", "resp1.tsr",
137                          "-out", "resp1.tsr.token", "-token_out"])));
138              ok(run(app([@RUN, "-verify", "-queryfile", "req1.tsq",
139                          "-in", "resp1.tsr.token", "-token_in",
140                          "-CAfile", "tsaca.pem",
141                          "-untrusted", "tsa_cert1.pem"])));
142              ok(run(app([@RUN, "-verify", "-data", $testtsa,
143                          "-in", "resp1.tsr.token", "-token_in",
144                          "-CAfile", "tsaca.pem",
145                          "-untrusted", "tsa_cert1.pem"])));
146      };
147
148      skip "failed", 10
149          unless ok(run(app([@RUN, "-query", "-data", $testtsa,
150                             "-tspolicy", "tsa_policy2", "-no_nonce",
151                             "-out", "req2.tsq"])),
152                    'creating req2.req time stamp request for file testtsa');
153
154      ok(run(app([@RUN, "-query", "-in", "req2.tsq", "-text"])),
155         'printing req2.req');
156
157      skip "failed", 8
158          unless subtest 'generating valid response for req2.req' => sub {
159              create_time_stamp_response("req2.tsq", "resp2.tsr", "tsa_config1")
160      };
161
162      skip "failed", 7
163          unless subtest 'checking -token_in and -token_out options with -reply' => sub {
164              my $RESPONSE2="resp2.tsr.copy.tsr";
165              my $TOKEN_DER="resp2.tsr.token.der";
166
167              ok(run(app([@RUN, "-reply", "-in", "resp2.tsr",
168                          "-out", "$TOKEN_DER", "-token_out"])));
169              ok(run(app([@RUN, "-reply", "-in", "$TOKEN_DER",
170                          "-token_in", "-out", "$RESPONSE2"])));
171              is(compare($RESPONSE2, "resp2.tsr"), 0);
172              ok(run(app([@RUN, "-reply", "-in", "resp2.tsr",
173                          "-text", "-token_out"])));
174              ok(run(app([@RUN, "-reply", "-in", "$TOKEN_DER",
175                          "-token_in", "-text", "-token_out"])));
176              ok(run(app([@RUN, "-reply", "-queryfile", "req2.tsq",
177                          "-text", "-token_out"])));
178      };
179
180      ok(run(app([@RUN, "-reply", "-in", "resp2.tsr", "-text"])),
181         'printing response');
182
183      subtest 'verifying valid response' => sub {
184          verify_time_stamp_response("req2.tsq", "resp2.tsr", $testtsa)
185      };
186
187      subtest 'verifying response against wrong request, it should fail' => sub {
188          verify_time_stamp_response_fail("req1.tsq", "resp2.tsr")
189      };
190
191      subtest 'verifying response against wrong request, it should fail' => sub {
192          verify_time_stamp_response_fail("req2.tsq", "resp1.tsr")
193      };
194
195      skip "failure", 2
196          unless ok(run(app([@RUN, "-query", "-data", $CAtsa,
197                             "-no_nonce", "-out", "req3.tsq"])),
198                    "creating req3.req time stamp request for file CAtsa.cnf");
199
200      ok(run(app([@RUN, "-query", "-in", "req3.tsq", "-text"])),
201         'printing req3.req');
202
203      subtest 'verifying response against wrong request, it should fail' => sub {
204          verify_time_stamp_response_fail("req3.tsq", "resp1.tsr")
205      };
206     }
207 }, create => 1, cleanup => 1