2 # Copyright 2015-2020 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the Apache License 2.0 (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
14 use File::Compare qw/compare_text/;
16 use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file bldtop_file bldtop_dir/;
17 use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
20 setup("test_ssl_new");
23 use lib srctop_dir('Configurations');
24 use lib bldtop_dir('.');
27 my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
29 $ENV{OPENSSL_MODULES} = bldtop_dir("providers");
30 $ENV{OPENSSL_CONF_INCLUDE} = bldtop_dir("providers");
31 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
32 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
34 my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.cnf.in"));
35 map { s/;.*// } @conf_srcs if $^O eq "VMS";
36 my @conf_files = map { basename($_, ".in") } @conf_srcs;
37 map { s/\^// } @conf_files if $^O eq "VMS";
39 # We hard-code the number of tests to double-check that the globbing above
40 # finds all files as expected.
41 plan tests => 30 # = scalar @conf_srcs
42 + ($no_fips ? 0 : 1); # fipsinstall
44 # Some test results depend on the configuration of enabled protocols. We only
45 # verify generated sources in the default configuration.
46 my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
47 !disabled("tls1_1") && !disabled("tls1_2") &&
50 my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
52 my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2");
53 my $no_tls = alldisabled(available_protocols("tls"));
54 my $no_tls_below1_3 = $no_tls || (disabled("tls1_2") && !disabled("tls1_3"));
55 my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3);
56 my $no_dtls = alldisabled(available_protocols("dtls"));
57 my $no_npn = disabled("nextprotoneg");
58 my $no_ct = disabled("ct");
59 my $no_ec = disabled("ec");
60 my $no_dh = disabled("dh");
61 my $no_dsa = disabled("dsa");
62 my $no_ec2m = disabled("ec2m");
63 my $no_ocsp = disabled("ocsp");
65 # Add your test here if the test conf.in generates test cases and/or
66 # expectations dynamically based on the OpenSSL compile-time config.
67 my %conf_dependent_tests = (
68 "02-protocol-version.cnf" => !$is_default_tls,
69 "04-client_auth.cnf" => !$is_default_tls || !$is_default_dtls
71 "05-sni.cnf" => disabled("tls1_1"),
72 "07-dtls-protocol-version.cnf" => !$is_default_dtls || !disabled("sctp"),
73 "10-resumption.cnf" => !$is_default_tls || $no_ec,
74 "11-dtls_resumption.cnf" => !$is_default_dtls || !disabled("sctp"),
75 "16-dtls-certstatus.cnf" => !$is_default_dtls || !disabled("sctp"),
76 "17-renegotiate.cnf" => disabled("tls1_2"),
77 "18-dtls-renegotiate.cnf" => disabled("dtls1_2") || !disabled("sctp"),
78 "19-mac-then-encrypt.cnf" => !$is_default_tls,
79 "20-cert-select.cnf" => !$is_default_tls || $no_dh || $no_dsa,
80 "22-compression.cnf" => !$is_default_tls,
81 "25-cipher.cnf" => disabled("poly1305") || disabled("chacha"),
82 "27-ticket-appdata.cnf" => !$is_default_tls,
83 "28-seclevel.cnf" => disabled("tls1_2") || $no_ec,
84 "30-extended-master-secret.cnf" => disabled("tls1_2"),
87 # Add your test here if it should be skipped for some compile-time
88 # configurations. Default is $no_tls but some tests have different skip
91 "06-sni-ticket.cnf" => $no_tls_below1_3,
92 "07-dtls-protocol-version.cnf" => $no_dtls,
93 "08-npn.cnf" => (disabled("tls1") && disabled("tls1_1")
94 && disabled("tls1_2")) || $no_npn,
95 "10-resumption.cnf" => disabled("tls1_1") || disabled("tls1_2"),
96 "11-dtls_resumption.cnf" => disabled("dtls1") || disabled("dtls1_2"),
97 "12-ct.cnf" => $no_tls || $no_ct || $no_ec,
98 # We could run some of these tests without TLS 1.2 if we had a per-test
99 # disable instruction but that's a bizarre configuration not worth
100 # special-casing for.
101 # TODO(TLS 1.3): We should review this once we have TLS 1.3.
102 "13-fragmentation.cnf" => disabled("tls1_2"),
103 "14-curves.cnf" => disabled("tls1_2") || $no_ec || $no_ec2m,
104 "15-certstatus.cnf" => $no_tls || $no_ocsp,
105 "16-dtls-certstatus.cnf" => $no_dtls || $no_ocsp,
106 "17-renegotiate.cnf" => $no_tls_below1_3,
107 "18-dtls-renegotiate.cnf" => $no_dtls,
108 "19-mac-then-encrypt.cnf" => $no_pre_tls1_3,
109 "20-cert-select.cnf" => disabled("tls1_2") || $no_ec,
110 "21-key-update.cnf" => disabled("tls1_3"),
111 "22-compression.cnf" => disabled("zlib") || $no_tls,
112 "23-srp.cnf" => (disabled("tls1") && disabled ("tls1_1")
113 && disabled("tls1_2")) || disabled("srp"),
114 "24-padding.cnf" => disabled("tls1_3"),
115 "25-cipher.cnf" => disabled("ec") || disabled("tls1_2"),
116 "26-tls13_client_auth.cnf" => disabled("tls1_3"),
117 "29-dtls-sctp-label-bug.cnf" => disabled("sctp") || disabled("sock"),
121 ok(run(app(['openssl', 'fipsinstall',
122 '-out', bldtop_file('providers', 'fipsmodule.cnf'),
123 '-module', bldtop_file('providers', platform->dso('fips')),
124 '-provider_name', 'fips', '-mac_name', 'HMAC',
125 '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
126 '-section_name', 'fips_sect'])),
130 foreach my $conf (@conf_files) {
131 subtest "Test configuration $conf" => sub {
132 plan tests => 6 + ($no_fips ? 0 : 3);
134 $conf_dependent_tests{$conf} || $^O eq "VMS" ? 0 : 1,
135 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
139 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
143 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
144 "fips") unless $no_fips;
149 my ($conf, $check_source, $skip, $provider) = @_;
151 my $conf_file = srctop_file("test", "ssl-tests", $conf);
152 my $input_file = $conf_file . ".in";
153 my $output_file = $conf . "." . $provider;
157 # "Test" 1. Generate the source.
158 skip 'failure', 2 unless
159 ok(run(perltest(["generate_ssl_tests.pl", $input_file, $provider],
160 interpreter_args => [ "-I", srctop_dir("util", "perl")],
161 stdout => $output_file)),
162 "Getting output from generate_ssl_tests.pl.");
165 # Test 2. Compare against existing output in test/ssl_tests.cnf.
166 skip "Skipping generated source test for $conf", 1
169 $run_test = is(cmp_text($output_file, $conf_file), 0,
170 "Comparing generated sources.");
173 # Test 3. Run the test.
174 skip "No tests available; skipping tests", 1 if $skip;
175 skip "Stale sources; skipping tests", 1 if !$run_test;
177 if ($provider eq "fips") {
178 ok(run(test(["ssl_test", $output_file, $provider,
179 srctop_file("test", "fips.cnf")])),
180 "running ssl_test $conf");
182 ok(run(test(["ssl_test", $output_file, $provider])),
183 "running ssl_test $conf");
189 return compare_text(@_, sub {
192 return $_[0] ne $_[1];