32616f01953c9aff9c4ef2a60dda3b0b07497d6d
[openssl.git] / test / recipes / 80-test_ssl.t
1 #! /usr/bin/perl
2
3 use strict;
4 use warnings;
5
6 use POSIX;
7 use File::Spec;
8 use File::Copy;
9 use OpenSSL::Test qw/:DEFAULT with top_file cmdstr/;
10 use OpenSSL::Test::Utils;
11
12 setup("test_ssl");
13
14 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
15     $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
16     $no_dtls, $no_dtls1, $no_dtls1_2) =
17     anydisabled qw/rsa dsa dh ec srp psk
18                    ssl3 tls1 tls1_1 tls1_2
19                    dtls dtls1 dtls1_2/;
20 my $no_anytls = alldisabled(available_protocols("tls"));
21 my $no_anydtls = alldisabled(available_protocols("dtls"));
22
23 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
24     if $no_anytls && $no_anydtls;
25
26 my $digest = "-sha1";
27 my @reqcmd = ("openssl", "req");
28 my @x509cmd = ("openssl", "x509", $digest);
29 my @verifycmd = ("openssl", "verify");
30 my $dummycnf = top_file("apps", "openssl.cnf");
31
32 my $CAkey = "keyCA.ss";
33 my $CAcert="certCA.ss";
34 my $CAserial="certCA.srl";
35 my $CAreq="reqCA.ss";
36 my $CAconf=top_file("test","CAss.cnf");
37 my $CAreq2="req2CA.ss"; # temp
38
39 my $Uconf=top_file("test","Uss.cnf");
40 my $Ukey="keyU.ss";
41 my $Ureq="reqU.ss";
42 my $Ucert="certU.ss";
43
44 my $Dkey="keyD.ss";
45 my $Dreq="reqD.ss";
46 my $Dcert="certD.ss";
47
48 my $Ekey="keyE.ss";
49 my $Ereq="reqE.ss";
50 my $Ecert="certE.ss";
51
52 my $P1conf=top_file("test","P1ss.cnf");
53 my $P1key="keyP1.ss";
54 my $P1req="reqP1.ss";
55 my $P1cert="certP1.ss";
56 my $P1intermediate="tmp_intP1.ss";
57
58 my $P2conf=top_file("test","P2ss.cnf");
59 my $P2key="keyP2.ss";
60 my $P2req="reqP2.ss";
61 my $P2cert="certP2.ss";
62 my $P2intermediate="tmp_intP2.ss";
63
64 plan tests =>
65     1                           # For testss
66     + 1                         # For ssltest -test_cipherlist
67     + 10                        # For the first testssl
68     + 16                        # For the first testsslproxy
69     + 16                        # For the second testsslproxy
70     ;
71
72 subtest 'test_ss' => sub {
73     if (testss()) {
74         open OUT, ">", "intP1.ss";
75         copy($CAcert, \*OUT); copy($Ucert, \*OUT);
76         close OUT;
77
78         open OUT, ">", "intP2.ss";
79         copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
80         close OUT;
81     }
82 };
83
84 my $check = ok(run(test(["ssltest","-test_cipherlist"])), "running ssltest");
85
86   SKIP: {
87       skip "ssltest ended with error, skipping the rest", 3
88           if !$check;
89
90       note('test_ssl -- key U');
91       testssl("keyU.ss", $Ucert, $CAcert);
92
93       note('test_ssl -- key P1');
94       testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
95
96       note('test_ssl -- key P2');
97       testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
98     }
99
100 # -----------
101 # subtest functions
102 sub testss {
103     open RND, ">>", ".rnd";
104     print RND "string to make the random number generator think it has entropy";
105     close RND;
106
107     my @req_dsa = ("-newkey",
108                    "dsa:".File::Spec->catfile("..", "apps", "dsa1024.pem"));;
109     my @req_new;
110     if ($no_rsa) {
111         @req_new = @req_dsa;
112     } else {
113         @req_new = ("-new");
114     }
115
116     plan tests => 17;
117
118   SKIP: {
119       skip 'failure', 16 unless
120           ok(run(app([@reqcmd, "-config", $CAconf,
121                       "-out", $CAreq, "-keyout", $CAkey,
122                       @req_new])),
123              'make cert request');
124
125       skip 'failure', 15 unless
126           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
127                       "-req", "-out", $CAcert, "-signkey", $CAkey,
128                       "-extfile", $CAconf, "-extensions", "v3_ca"],
129                      stdout => "err.ss")),
130              'convert request into self-signed cert');
131
132       skip 'failure', 14 unless
133           ok(run(app([@x509cmd, "-in", $CAcert,
134                       "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
135                      stdout => "err.ss")),
136              'convert cert into a cert request');
137
138       skip 'failure', 13 unless
139           ok(run(app([@reqcmd, "-config", $dummycnf,
140                       "-verify", "-in", $CAreq, "-noout"])),
141              'verify request 1');
142
143
144       skip 'failure', 12 unless
145           ok(run(app([@reqcmd, "-config", $dummycnf,
146                       "-verify", "-in", $CAreq2, "-noout"])),
147              'verify request 2');
148
149       skip 'failure', 11 unless
150           ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
151              'verify signature');
152
153       skip 'failure', 10 unless
154           ok(run(app([@reqcmd, "-config", $Uconf,
155                       "-out", $Ureq, "-keyout", $Ukey, @req_new],
156                      stdout => "err.ss")),
157              'make a user cert request');
158
159       skip 'failure', 9 unless
160           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
161                       "-req", "-out", $Ucert,
162                       "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
163                       "-extfile", $Uconf, "-extensions", "v3_ee"],
164                      stdout => "err.ss"))
165              && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
166              'sign user cert request');
167
168       skip 'failure', 8 unless
169           ok(run(app([@x509cmd,
170                       "-subject", "-issuer", "-startdate", "-enddate",
171                       "-noout", "-in", $Ucert])),
172              'Certificate details');
173
174       skip 'failure', 7 unless
175           subtest 'DSA certificate creation' => sub {
176               plan skip_all => "skipping DSA certificate creation"
177                   if $no_dsa;
178
179               plan tests => 4;
180
181             SKIP: {
182                 $ENV{CN2} = "DSA Certificate";
183                 skip 'failure', 3 unless
184                     ok(run(app([@reqcmd, "-config", $Uconf,
185                                 "-out", $Dreq, "-keyout", $Dkey,
186                                 @req_dsa],
187                                stdout => "err.ss")),
188                        "make a DSA user cert request");
189                 skip 'failure', 2 unless
190                     ok(run(app([@x509cmd, "-CAcreateserial",
191                                 "-in", $Dreq,
192                                 "-days", "30",
193                                 "-req",
194                                 "-out", $Dcert,
195                                 "-CA", $CAcert, "-CAkey", $CAkey,
196                                 "-CAserial", $CAserial,
197                                 "-extfile", $Uconf,
198                                 "-extensions", "v3_ee_dsa"],
199                                stdout => "err.ss")),
200                        "sign DSA user cert request");
201                 skip 'failure', 1 unless
202                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
203                        "verify DSA user cert");
204                 skip 'failure', 0 unless
205                     ok(run(app([@x509cmd,
206                                 "-subject", "-issuer",
207                                 "-startdate", "-enddate", "-noout",
208                                 "-in", $Dcert])),
209                        "DSA Certificate details");
210               }
211       };
212
213       skip 'failure', 6 unless
214           subtest 'ECDSA/ECDH certificate creation' => sub {
215               plan skip_all => "skipping ECDSA/ECDH certificate creation"
216                   if $no_ec;
217
218               plan tests => 5;
219
220             SKIP: {
221                 $ENV{CN2} = "ECDSA Certificate";
222                 skip 'failure', 4 unless
223                     ok(run(app(["openssl", "ecparam", "-name", "P-256",
224                                 "-out", "ecp.ss"])),
225                        "make EC parameters");
226                 skip 'failure', 3 unless
227                     ok(run(app([@reqcmd, "-config", $Uconf,
228                                 "-out", $Ereq, "-keyout", $Ekey,
229                                 "-newkey", "ec:ecp.ss"],
230                                stdout => "err.ss")),
231                        "make a ECDSA/ECDH user cert request");
232                 skip 'failure', 2 unless
233                     ok(run(app([@x509cmd, "-CAcreateserial",
234                                 "-in", $Ereq,
235                                 "-days", "30",
236                                 "-req",
237                                 "-out", $Ecert,
238                                 "-CA", $CAcert, "-CAkey", $CAkey,
239                                 "-CAserial", $CAserial,
240                                 "-extfile", $Uconf,
241                                 "-extensions", "v3_ee_ec"],
242                                stdout => "err.ss")),
243                        "sign ECDSA/ECDH user cert request");
244                 skip 'failure', 1 unless
245                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
246                        "verify ECDSA/ECDH user cert");
247                 skip 'failure', 0 unless
248                     ok(run(app([@x509cmd,
249                                 "-subject", "-issuer",
250                                 "-startdate", "-enddate", "-noout",
251                                 "-in", $Ecert])),
252                        "ECDSA Certificate details");
253               }
254       };
255
256       skip 'failure', 5 unless
257           ok(run(app([@reqcmd, "-config", $P1conf,
258                       "-out", $P1req, "-keyout", $P1key, @req_new],
259                      stdout => "err.ss")),
260              'make a proxy cert request');
261
262
263       skip 'failure', 4 unless
264           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
265                       "-req", "-out", $P1cert,
266                       "-CA", $Ucert, "-CAkey", $Ukey,
267                       "-extfile", $P1conf, "-extensions", "v3_proxy"],
268                      stdout => "err.ss")),
269              'sign proxy with user cert');
270
271       copy($Ucert, $P1intermediate);
272       run(app([@verifycmd, "-CAfile", $CAcert,
273                "-untrusted", $P1intermediate, $P1cert]));
274       ok(run(app([@x509cmd,
275                   "-subject", "-issuer", "-startdate", "-enddate",
276                   "-noout", "-in", $P1cert])),
277          'Certificate details');
278
279       skip 'failure', 2 unless
280           ok(run(app([@reqcmd, "-config", $P2conf,
281                       "-out", $P2req, "-keyout", $P2key,
282                       @req_new],
283                      stdout => "err.ss")),
284              'make another proxy cert request');
285
286
287       skip 'failure', 1 unless
288           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
289                       "-req", "-out", $P2cert,
290                       "-CA", $P1cert, "-CAkey", $P1key,
291                       "-extfile", $P2conf, "-extensions", "v3_proxy"],
292                      stdout => "err.ss")),
293              'sign second proxy cert request with the first proxy cert');
294
295
296       open OUT, ">", $P2intermediate;
297       copy($Ucert, \*OUT); copy($P1cert, \*OUT);
298       close OUT;
299       run(app([@verifycmd, "-CAfile", $CAcert,
300                "-untrusted", $P2intermediate, $P2cert]));
301       ok(run(app([@x509cmd,
302                   "-subject", "-issuer", "-startdate", "-enddate",
303                   "-noout", "-in", $P2cert])),
304          'Certificate details');
305     }
306 }
307
308 sub testssl {
309     my $key = shift || top_file("apps","server.pem");
310     my $cert = shift || top_file("apps","server.pem");
311     my $CAtmp = shift;
312     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
313     my @extra = @_;
314
315     my @ssltest = ("ssltest",
316                    "-s_key", $key, "-s_cert", $cert,
317                    "-c_key", $key, "-c_cert", $cert);
318
319     my $serverinfo = top_file("test","serverinfo.pem");
320
321     my $dsa_cert = 0;
322     if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
323                                         "-text", "-noout"]), capture => 1)) {
324         $dsa_cert = 1;
325     }
326
327
328     # plan tests => 10;
329
330     subtest 'standard SSL tests' => sub {
331         ######################################################################
332         plan tests => 29;
333
334       SKIP: {
335           skip "SSLv3 is not supported by this OpenSSL build", 4
336               if disabled("ssl3");
337
338           ok(run(test([@ssltest, "-ssl3", @extra])),
339              'test sslv3');
340           ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
341              'test sslv3 with server authentication');
342           ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
343              'test sslv3 with client authentication');
344           ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
345              'test sslv3 with both server and client authentication');
346         }
347
348       SKIP: {
349           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
350               if $no_anytls;
351
352           ok(run(test([@ssltest, @extra])),
353              'test sslv2/sslv3');
354           ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
355              'test sslv2/sslv3 with server authentication');
356           ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
357              'test sslv2/sslv3 with client authentication');
358           ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
359              'test sslv2/sslv3 with both server and client authentication');
360         }
361
362       SKIP: {
363           skip "SSLv3 is not supported by this OpenSSL build", 4
364               if disabled("ssl3");
365
366           ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
367              'test sslv3 via BIO pair');
368           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
369              'test sslv3 with server authentication via BIO pair');
370           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
371              'test sslv3 with client authentication via BIO pair');
372           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
373              'test sslv3 with both server and client authentication via BIO pair');
374         }
375
376       SKIP: {
377           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
378               if $no_anytls;
379
380           ok(run(test([@ssltest, "-bio_pair", @extra])),
381              'test sslv2/sslv3 via BIO pair');
382         }
383
384       SKIP: {
385           skip "DTLSv1 is not supported by this OpenSSL build", 4
386               if disabled("dtls1");
387
388           ok(run(test([@ssltest, "-dtls1", @extra])),
389              'test dtlsv1');
390           ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
391            'test dtlsv1 with server authentication');
392           ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
393              'test dtlsv1 with client authentication');
394           ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
395              'test dtlsv1 with both server and client authentication');
396         }
397
398       SKIP: {
399           skip "DTLSv1.2 is not supported by this OpenSSL build", 4
400               if disabled("dtls1_2");
401
402           ok(run(test([@ssltest, "-dtls12", @extra])),
403              'test dtlsv1.2');
404           ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
405              'test dtlsv1.2 with server authentication');
406           ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
407              'test dtlsv1.2 with client authentication');
408           ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
409              'test dtlsv1.2 with both server and client authentication');
410         }
411
412       SKIP: {
413           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
414               if $no_anytls;
415
416         SKIP: {
417             skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
418
419             ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
420                'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
421           }
422
423           ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
424              'test sslv2/sslv3 with 1024bit DHE via BIO pair');
425           ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
426              'test sslv2/sslv3 with server authentication');
427           ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
428              'test sslv2/sslv3 with client authentication via BIO pair');
429           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
430              'test sslv2/sslv3 with both client and server authentication via BIO pair');
431           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
432              'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
433
434           ok(run(test([@ssltest, "-ipv4", @extra])),
435              'test TLS via IPv4');
436           ok(run(test([@ssltest, "-ipv6", @extra])),
437              'test TLS via IPv6');
438
439         }
440     };
441
442     subtest "Testing ciphersuites" => sub {
443
444         my @exkeys = ();
445         my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
446
447         if ($no_dh) {
448             note "skipping DHE tests\n";
449             $ciphers .= ":-kDHE";
450         }
451         if ($no_dsa) {
452             note "skipping DSA tests\n";
453             $ciphers .= ":-aDSA";
454         } else {
455             push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
456         }
457
458         if ($no_ec) {
459             note "skipping EC tests\n";
460             $ciphers .= ":!aECDSA:!kECDH";
461         } else {
462             push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
463         }
464
465         my @protocols = ();
466         # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
467         push(@protocols, "TLSv1.2") unless $no_tls1_2;
468         push(@protocols, "SSLv3") unless $no_ssl3;
469         my $protocolciphersuitcount = 0;
470         my %ciphersuites =
471             map { my @c =
472                       map { split(/:/, $_) }
473                       run(app(["openssl", "ciphers", "${_}:$ciphers"]),
474                           capture => 1);
475                   map { s/\R//; } @c;  # chomp @c;
476                   $protocolciphersuitcount += scalar @c;
477                   $_ => [ @c ] } @protocols;
478
479         plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
480             if $protocolciphersuitcount + scalar(@protocols) == 0;
481
482         # The count of protocols is because in addition to the ciphersuits
483         # we got above, we're running a weak DH test for each protocol
484         plan tests => $protocolciphersuitcount + scalar(@protocols);
485
486         foreach my $protocol (@protocols) {
487             note "Testing ciphersuites for $protocol";
488             foreach my $cipher (@{$ciphersuites{$protocol}}) {
489                 ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
490                              $protocol eq "SSLv3" ? ("-ssl3") : ()])),
491                    "Testing $cipher");
492             }
493             is(run(test([@ssltest,
494                          "-s_cipher", "EDH",
495                          "-c_cipher", 'EDH:@SECLEVEL=1',
496                          "-dhe512",
497                          $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
498                "testing connection with weak DH, expecting failure");
499         }
500     };
501
502     subtest 'RSA/(EC)DHE/PSK tests' => sub {
503         ######################################################################
504
505         plan tests => 5;
506
507       SKIP: {
508           skip "TLSv1.0 is not supported by this OpenSSL build", 5
509               if $no_tls1;
510
511         SKIP: {
512             skip "skipping anonymous DH tests", 1
513               if ($no_dh);
514
515             ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
516                'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
517           }
518
519         SKIP: {
520             skip "skipping RSA tests", 2
521                 if $no_rsa;
522
523             ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
524                'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
525
526             skip "skipping RSA+DHE tests", 1
527                 if $no_dh;
528
529             ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
530                'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
531           }
532
533         SKIP: {
534             skip "skipping PSK tests", 2
535                 if ($no_psk);
536
537             ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
538                'test tls1 with PSK');
539
540             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
541                'test tls1 with PSK via BIO pair');
542           }
543         }
544
545     };
546
547     subtest 'Next Protocol Negotiation Tests' => sub {
548         ######################################################################
549
550         plan tests => 7;
551
552       SKIP: {
553           skip "TLSv1.0 is not supported by this OpenSSL build", 7
554               if $no_tls1;
555
556           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
557           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
558           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
559           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
560           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
561           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
562           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
563         }
564     };
565
566     subtest 'Custom Extension tests' => sub {
567         ######################################################################
568
569         plan tests => 1;
570
571       SKIP: {
572           skip "TLSv1.0 is not supported by this OpenSSL build", 1
573               if $no_tls1;
574
575           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
576              'test tls1 with custom extensions');
577         }
578     };
579
580     subtest 'Serverinfo tests' => sub {
581         ######################################################################
582
583         plan tests => 5;
584
585       SKIP: {
586           skip "TLSv1.0 is not supported by this OpenSSL build", 5
587               if $no_tls1;
588
589           note('echo test tls1 with serverinfo');
590           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
591           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
592           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
593           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
594           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
595         }
596     };
597
598     subtest 'ALPN tests' => sub {
599         ######################################################################
600
601         plan tests => 12;
602
603       SKIP: {
604           skip "TLSv1.0 is not supported by this OpenSSL build", 12
605               if $no_tls1;
606
607           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])));
608           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
609           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
610           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
611           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
612           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
613           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
614           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])));
615
616         SKIP: {
617             skip "skipping SRP tests", 4
618                 if $no_srp;
619
620             ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
621                'test tls1 with SRP');
622
623             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
624                'test tls1 with SRP via BIO pair');
625
626             ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
627                  'test tls1 with SRP auth');
628
629             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
630                'test tls1 with SRP auth via BIO pair');
631           }
632         }
633     };
634
635     subtest 'Multi-buffer tests' => sub {
636         ######################################################################
637
638         plan tests => 2;
639
640       SKIP: {
641           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
642               if $no_anytls;
643
644           skip "skipping multi-buffer tests", 2
645               if @extra || (POSIX::uname())[4] ne "x86_64";
646
647           ok(run(test([@ssltest, "-cipher", "AES128-SHA",    "-bytes", "8m"])));
648
649           # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
650           skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
651               if $no_tls1_2;
652
653           ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
654         }
655     };
656
657     subtest 'TLS Version min/max tests' => sub {
658         my @protos;
659         push(@protos, "ssl3") unless $no_ssl3;
660         push(@protos, "tls1") unless $no_tls1;
661         push(@protos, "tls1.1") unless $no_tls1_1;
662         push(@protos, "tls1.2") unless $no_tls1_2;
663         my @minprotos = (undef, @protos);
664         my @maxprotos = (@protos, undef);
665         my @shdprotos = (@protos, $protos[$#protos]);
666         my $n = ((@protos+2) * (@protos+3))/2 - 2;
667         my $ntests = $n * $n;
668         plan tests => $ntests;
669       SKIP: {
670         skip "TLS disabled", 1 if $ntests == 1;
671
672         my $should;
673         for (my $smin = 0; $smin < @minprotos; ++$smin) {
674         for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
675         for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
676         for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
677             if ($cmax < $smin-1) {
678                 $should = "fail-server";
679             } elsif ($smax < $cmin-1) {
680                 $should = "fail-client";
681             } elsif ($cmax > $smax) {
682                 $should = $shdprotos[$smax];
683             } else {
684                 $should = $shdprotos[$cmax];
685             }
686
687             my @args = @ssltest;
688             push(@args, "-should_negotiate", $should);
689             push(@args, "-server_min_proto", $minprotos[$smin])
690                 if (defined($minprotos[$smin]));
691             push(@args, "-server_max_proto", $maxprotos[$smax])
692                 if (defined($maxprotos[$smax]));
693             push(@args, "-client_min_proto", $minprotos[$cmin])
694                 if (defined($minprotos[$cmin]));
695             push(@args, "-client_max_proto", $maxprotos[$cmax])
696                 if (defined($maxprotos[$cmax]));
697             my $ok = run(test[@args]);
698             if (! $ok) {
699                 print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
700                 print STDERR "\nFailed: @args\n";
701             }
702             ok($ok);
703         }}}}}
704     };
705
706     subtest 'DTLS Version min/max tests' => sub {
707         my @protos;
708         push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
709         push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
710         my @minprotos = (undef, @protos);
711         my @maxprotos = (@protos, undef);
712         my @shdprotos = (@protos, $protos[$#protos]);
713         my $n = ((@protos+2) * (@protos+3))/2 - 2;
714         my $ntests = $n * $n;
715         plan tests => $ntests;
716       SKIP: {
717         skip "DTLS disabled", 1 if $ntests == 1;
718
719         my $should;
720         for (my $smin = 0; $smin < @minprotos; ++$smin) {
721         for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
722         for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
723         for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
724             if ($cmax < $smin-1) {
725                 $should = "fail-server";
726             } elsif ($smax < $cmin-1) {
727                 $should = "fail-client";
728             } elsif ($cmax > $smax) {
729                 $should = $shdprotos[$smax];
730             } else {
731                 $should = $shdprotos[$cmax];
732             }
733
734             my @args = (@ssltest, "-dtls");
735             push(@args, "-should_negotiate", $should);
736             push(@args, "-server_min_proto", $minprotos[$smin])
737                 if (defined($minprotos[$smin]));
738             push(@args, "-server_max_proto", $maxprotos[$smax])
739                 if (defined($maxprotos[$smax]));
740             push(@args, "-client_min_proto", $minprotos[$cmin])
741                 if (defined($minprotos[$cmin]));
742             push(@args, "-client_max_proto", $maxprotos[$cmax])
743                 if (defined($maxprotos[$cmax]));
744             my $ok = run(test[@args]);
745             if (! $ok) {
746                 print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
747                 print STDERR "\nFailed: @args\n";
748             }
749             ok($ok);
750         }}}}}
751     };
752 }
753
754 sub testsslproxy {
755     my $key = shift || top_file("apps","server.pem");
756     my $cert = shift || top_file("apps","server.pem");
757     my $CAtmp = shift;
758     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
759     my @extra = @_;
760
761     my @ssltest = ("ssltest",
762                    "-s_key", $key, "-s_cert", $cert,
763                    "-c_key", $key, "-c_cert", $cert);
764
765     # plan tests => 16;
766
767     note('Testing a lot of proxy conditions.');
768
769     # We happen to know that certP1.ss has policy letters "AB" and
770     # certP2.ss has policy letters "BC".  However, because certP2.ss
771     # has certP1.ss as issuer, when it's used, both their policy
772     # letters get combined into just "B".
773     # The policy letter(s) then get filtered with the given auth letter
774     # in the table below, and the result gets tested with the given
775     # condition.  For details, read ssltest.c
776     #
777     # certfilename => [ [ auth, cond, expected result ] ... ]
778     my %expected = ( "certP1.ss" => [ [ [ 'A',  'A'      ], 1 ],
779                                       [ [ 'A',  'B'      ], 0 ],
780                                       [ [ 'A',  'C'      ], 0 ],
781                                       [ [ 'A',  'A|B&!C' ], 1 ],
782                                       [ [ 'B',  'A'      ], 0 ],
783                                       [ [ 'B',  'B'      ], 1 ],
784                                       [ [ 'B',  'C'      ], 0 ],
785                                       [ [ 'B',  'A|B&!C' ], 1 ],
786                                       [ [ 'C',  'A'      ], 0 ],
787                                       [ [ 'C',  'B'      ], 0 ],
788                                       [ [ 'C',  'C'      ], 0 ],
789                                       [ [ 'C',  'A|B&!C' ], 0 ],
790                                       [ [ 'BC', 'A'      ], 0 ],
791                                       [ [ 'BC', 'B'      ], 1 ],
792                                       [ [ 'BC', 'C'      ], 0 ],
793                                       [ [ 'BC', 'A|B&!C' ], 1 ] ],
794                      "certP2.ss" => [ [ [ 'A',  'A'      ], 0 ],
795                                       [ [ 'A',  'B'      ], 0 ],
796                                       [ [ 'A',  'C'      ], 0 ],
797                                       [ [ 'A',  'A|B&!C' ], 0 ],
798                                       [ [ 'B',  'A'      ], 0 ],
799                                       [ [ 'B',  'B'      ], 1 ],
800                                       [ [ 'B',  'C'      ], 0 ],
801                                       [ [ 'B',  'A|B&!C' ], 1 ],
802                                       [ [ 'C',  'A'      ], 0 ],
803                                       [ [ 'C',  'B'      ], 0 ],
804                                       [ [ 'C',  'C'      ], 0 ],
805                                       [ [ 'C',  'A|B&!C' ], 0 ],
806                                       [ [ 'BC', 'A'      ], 0 ],
807                                       [ [ 'BC', 'B'      ], 1 ],
808                                       [ [ 'BC', 'C'      ], 0 ],
809                                       [ [ 'BC', 'A|B&!C' ], 1 ] ] );
810
811   SKIP: {
812       skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
813           if $no_anytls;
814
815       foreach (@{$expected{$cert}}) {
816           my $auth = $_->[0]->[0];
817           my $cond = $_->[0]->[1];
818           my $res  = $_->[1];
819           is(run(test([@ssltest, "-server_auth", @CA,
820                        "-proxy", "-proxy_auth", $auth,
821                        "-proxy_cond", $cond])), $res,
822              "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
823              .($res ? "success" : "failure").")");
824       }
825     }
826 }