3 * DTLS implementation written by Nagendra Modadugu
4 * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.
6 /* ====================================================================
7 * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in
18 * the documentation and/or other materials provided with the
21 * 3. All advertising materials mentioning features or use of this
22 * software must display the following acknowledgment:
23 * "This product includes software developed by the OpenSSL Project
24 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
26 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
27 * endorse or promote products derived from this software without
28 * prior written permission. For written permission, please contact
29 * openssl-core@openssl.org.
31 * 5. Products derived from this software may not be called "OpenSSL"
32 * nor may "OpenSSL" appear in their names without prior written
33 * permission of the OpenSSL Project.
35 * 6. Redistributions of any form whatsoever must retain the following
37 * "This product includes software developed by the OpenSSL Project
38 * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
40 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
41 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
43 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
44 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
46 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
47 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
49 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
50 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
51 * OF THE POSSIBILITY OF SUCH DAMAGE.
52 * ====================================================================
54 * This product includes cryptographic software written by Eric Young
55 * (eay@cryptsoft.com). This product includes software written by Tim
56 * Hudson (tjh@cryptsoft.com).
59 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
60 * All rights reserved.
62 * This package is an SSL implementation written
63 * by Eric Young (eay@cryptsoft.com).
64 * The implementation was written so as to conform with Netscapes SSL.
66 * This library is free for commercial and non-commercial use as long as
67 * the following conditions are aheared to. The following conditions
68 * apply to all code found in this distribution, be it the RC4, RSA,
69 * lhash, DES, etc., code; not just the SSL code. The SSL documentation
70 * included with this distribution is covered by the same copyright terms
71 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
73 * Copyright remains Eric Young's, and as such any Copyright notices in
74 * the code are not to be removed.
75 * If this package is used in a product, Eric Young should be given attribution
76 * as the author of the parts of the library used.
77 * This can be in the form of a textual message at program startup or
78 * in documentation (online or textual) provided with the package.
80 * Redistribution and use in source and binary forms, with or without
81 * modification, are permitted provided that the following conditions
83 * 1. Redistributions of source code must retain the copyright
84 * notice, this list of conditions and the following disclaimer.
85 * 2. Redistributions in binary form must reproduce the above copyright
86 * notice, this list of conditions and the following disclaimer in the
87 * documentation and/or other materials provided with the distribution.
88 * 3. All advertising materials mentioning features or use of this software
89 * must display the following acknowledgement:
90 * "This product includes cryptographic software written by
91 * Eric Young (eay@cryptsoft.com)"
92 * The word 'cryptographic' can be left out if the rouines from the library
93 * being used are not cryptographic related :-).
94 * 4. If you include any Windows specific code (or a derivative thereof) from
95 * the apps directory (application code) you must include an acknowledgement:
96 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
98 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
99 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
100 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
101 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
102 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
103 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
104 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
105 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
106 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
107 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
110 * The licence and distribution terms for any publically available version or
111 * derivative of this code cannot be changed. i.e. this code cannot simply be
112 * copied and put under another distribution licence
113 * [including the GNU Public Licence.]
119 #include "ssl_locl.h"
120 #include <openssl/evp.h>
121 #include <openssl/buffer.h>
122 #include <openssl/pqueue.h>
123 #include <openssl/rand.h>
125 /* mod 128 saturating subtract of two 64-bit values in big-endian order */
126 static int satsub64be(const unsigned char *v1,const unsigned char *v2)
129 if (sizeof(long) == 8) do
130 { const union { long one; char little; } is_endian = {1};
133 if (is_endian.little) break;
134 /* not reached on little-endians */
135 /* following test is redundant, because input is
136 * always aligned, but I take no chances... */
137 if (((size_t)v1|(size_t)v2)&0x7) break;
141 if (l>128) return 128;
142 else if (l<-128) return -128;
146 ret = (int)v1[7]-(int)v2[7];
148 brw = ret>>8; /* brw is either 0 or -1 */
151 { brw += (int)v1[i]-(int)v2[i];
158 { brw += (int)v1[i]-(int)v2[i];
163 brw <<= 8; /* brw is either 0 or -256 */
165 if (sat&0xff) return brw | 0x80;
166 else return brw + (ret&0xFF);
169 static int have_handshake_fragment(SSL *s, int type, unsigned char *buf,
171 static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap);
172 static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap);
173 static DTLS1_BITMAP *dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr,
174 unsigned int *is_next_epoch);
176 static int dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr,
177 unsigned short *priority, unsigned long *offset);
179 static int dtls1_buffer_record(SSL *s, record_pqueue *q,
180 unsigned char *priority);
181 static int dtls1_process_record(SSL *s);
182 static void dtls1_clear_timeouts(SSL *s);
184 /* copy buffered record into SSL structure */
186 dtls1_copy_record(SSL *s, pitem *item)
188 DTLS1_RECORD_DATA *rdata;
190 rdata = (DTLS1_RECORD_DATA *)item->data;
192 if (s->s3->rbuf.buf != NULL)
193 OPENSSL_free(s->s3->rbuf.buf);
195 s->packet = rdata->packet;
196 s->packet_length = rdata->packet_length;
197 memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER));
198 memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD));
205 dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority)
207 DTLS1_RECORD_DATA *rdata;
210 rdata = OPENSSL_malloc(sizeof(DTLS1_RECORD_DATA));
211 item = pitem_new(priority, rdata);
212 if (rdata == NULL || item == NULL)
214 if (rdata != NULL) OPENSSL_free(rdata);
215 if (item != NULL) pitem_free(item);
217 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
221 rdata->packet = s->packet;
222 rdata->packet_length = s->packet_length;
223 memcpy(&(rdata->rbuf), &(s->s3->rbuf), sizeof(SSL3_BUFFER));
224 memcpy(&(rdata->rrec), &(s->s3->rrec), sizeof(SSL3_RECORD));
228 /* insert should not fail, since duplicates are dropped */
229 if (pqueue_insert(queue->q, item) == NULL)
237 s->packet_length = 0;
238 memset(&(s->s3->rbuf), 0, sizeof(SSL3_BUFFER));
239 memset(&(s->s3->rrec), 0, sizeof(SSL3_RECORD));
241 if (!ssl3_setup_buffers(s))
243 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
254 dtls1_retrieve_buffered_record(SSL *s, record_pqueue *queue)
258 item = pqueue_pop(queue->q);
261 dtls1_copy_record(s, item);
263 OPENSSL_free(item->data);
273 /* retrieve a buffered record that belongs to the new epoch, i.e., not processed
275 #define dtls1_get_unprocessed_record(s) \
276 dtls1_retrieve_buffered_record((s), \
277 &((s)->d1->unprocessed_rcds))
279 /* retrieve a buffered record that belongs to the current epoch, ie, processed */
280 #define dtls1_get_processed_record(s) \
281 dtls1_retrieve_buffered_record((s), \
282 &((s)->d1->processed_rcds))
285 dtls1_process_buffered_records(SSL *s)
289 item = pqueue_peek(s->d1->unprocessed_rcds.q);
292 DTLS1_RECORD_DATA *rdata;
293 rdata = (DTLS1_RECORD_DATA *)item->data;
295 /* Check if epoch is current. */
296 if (s->d1->unprocessed_rcds.epoch != s->d1->r_epoch)
297 return(1); /* Nothing to do. */
299 /* Process all the records. */
300 while (pqueue_peek(s->d1->unprocessed_rcds.q))
302 dtls1_get_unprocessed_record(s);
303 if ( ! dtls1_process_record(s))
305 dtls1_buffer_record(s, &(s->d1->processed_rcds),
306 s->s3->rrec.seq_num);
310 /* sync epoch numbers once all the unprocessed records
311 * have been processed */
312 s->d1->processed_rcds.epoch = s->d1->r_epoch;
313 s->d1->unprocessed_rcds.epoch = s->d1->r_epoch + 1;
322 dtls1_get_buffered_record(SSL *s)
326 (((PQ_64BIT)s->d1->handshake_read_seq) << 32) |
327 ((PQ_64BIT)s->d1->r_msg_hdr.frag_off);
329 if ( ! SSL_in_init(s)) /* if we're not (re)negotiating,
334 item = pqueue_peek(s->d1->rcvd_records);
335 if (item && item->priority == priority)
337 /* Check if we've received the record of interest. It must be
338 * a handshake record, since data records as passed up without
340 DTLS1_RECORD_DATA *rdata;
341 item = pqueue_pop(s->d1->rcvd_records);
342 rdata = (DTLS1_RECORD_DATA *)item->data;
344 if (s->s3->rbuf.buf != NULL)
345 OPENSSL_free(s->s3->rbuf.buf);
347 s->packet = rdata->packet;
348 s->packet_length = rdata->packet_length;
349 memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER));
350 memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD));
352 OPENSSL_free(item->data);
355 /* s->d1->next_expected_seq_num++; */
365 dtls1_process_record(SSL *s)
372 unsigned int mac_size;
373 unsigned char md[EVP_MAX_MD_SIZE];
379 /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
380 * and we have that many bytes in s->packet
382 rr->input= &(s->packet[DTLS1_RT_HEADER_LENGTH]);
384 /* ok, we can now read from 's->packet' data into 'rr'
385 * rr->input points at rr->length bytes, which
386 * need to be copied into rr->data by either
387 * the decryption or by the decompression
388 * When the data is 'copied' into the rr->data buffer,
389 * rr->input will be pointed at the new buffer */
391 /* We now have - encrypted [ MAC [ compressed [ plain ] ] ]
392 * rr->length bytes of encrypted compressed stuff. */
394 /* check is not needed I believe */
395 if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH)
397 al=SSL_AD_RECORD_OVERFLOW;
398 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
402 /* decrypt in place in 'rr->input' */
405 enc_err = s->method->ssl3_enc->enc(s,0);
409 /* SSLerr() and ssl3_send_alert() have been called */
412 /* otherwise enc_err == -1 */
413 goto decryption_failed_or_bad_record_mac;
417 printf("dec %d\n",rr->length);
418 { unsigned int z; for (z=0; z<rr->length; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); }
422 /* r->length is now the compressed data plus mac */
423 if ( (sess == NULL) ||
424 (s->enc_read_ctx == NULL) ||
425 (s->read_hash == NULL))
430 mac_size=EVP_MD_CTX_size(s->read_hash);
433 al=SSL_AD_INTERNAL_ERROR;
434 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_BAD_MAC_LENGTH);
438 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+mac_size)
440 #if 0 /* OK only for stream ciphers (then rr->length is visible from ciphertext anyway) */
441 al=SSL_AD_RECORD_OVERFLOW;
442 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_PRE_MAC_LENGTH_TOO_LONG);
445 goto decryption_failed_or_bad_record_mac;
448 /* check the MAC for rr->input (it's in mac_size bytes at the tail) */
449 if (rr->length < mac_size)
451 #if 0 /* OK only for stream ciphers */
452 al=SSL_AD_DECODE_ERROR;
453 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_LENGTH_TOO_SHORT);
456 goto decryption_failed_or_bad_record_mac;
459 rr->length-=mac_size;
460 i=s->method->ssl3_enc->mac(s,md,0);
461 if (memcmp(md,&(rr->data[rr->length]),mac_size) != 0)
463 goto decryption_failed_or_bad_record_mac;
467 /* r->length is now just compressed */
468 if (s->expand != NULL)
470 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH)
472 al=SSL_AD_RECORD_OVERFLOW;
473 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG);
476 if (!ssl3_do_uncompress(s))
478 al=SSL_AD_DECOMPRESSION_FAILURE;
479 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_BAD_DECOMPRESSION);
484 if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH)
486 al=SSL_AD_RECORD_OVERFLOW;
487 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_DATA_LENGTH_TOO_LONG);
492 /* So at this point the following is true
493 * ssl->s3->rrec.type is the type of record
494 * ssl->s3->rrec.length == number of bytes in record
495 * ssl->s3->rrec.off == offset to first valid byte
496 * ssl->s3->rrec.data == where to take bytes from, increment
500 /* we have pulled in a full packet so zero things */
502 dtls1_record_bitmap_update(s, &(s->d1->bitmap));/* Mark receipt of record. */
505 decryption_failed_or_bad_record_mac:
506 /* Separate 'decryption_failed' alert was introduced with TLS 1.0,
507 * SSL 3.0 only has 'bad_record_mac'. But unless a decryption
508 * failure is directly visible from the ciphertext anyway,
509 * we should not reveal which kind of error occured -- this
510 * might become visible to an attacker (e.g. via logfile) */
511 al=SSL_AD_BAD_RECORD_MAC;
512 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
514 ssl3_send_alert(s,SSL3_AL_FATAL,al);
520 /* Call this to get a new input record.
521 * It will return <= 0 if more data is needed, normally due to an error
522 * or non-blocking IO.
523 * When it finishes, one packet has been decoded and can be found in
524 * ssl->s3->rrec.type - is the type of record
525 * ssl->s3->rrec.data, - data
526 * ssl->s3->rrec.length, - number of bytes
528 /* used only by dtls1_read_bytes */
529 int dtls1_get_record(SSL *s)
531 int ssl_major,ssl_minor,al;
536 unsigned short version;
537 DTLS1_BITMAP *bitmap;
538 unsigned int is_next_epoch;
543 /* The epoch may have changed. If so, process all the
544 * pending records. This is a non-blocking operation. */
545 if ( ! dtls1_process_buffered_records(s))
548 /* if we're renegotiating, then there may be buffered records */
549 if (dtls1_get_processed_record(s))
552 /* get something from the wire */
554 /* check if we have the header */
555 if ( (s->rstate != SSL_ST_READ_BODY) ||
556 (s->packet_length < DTLS1_RT_HEADER_LENGTH))
558 n=ssl3_read_n(s, DTLS1_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
559 /* read timeout is handled by dtls1_read_bytes */
560 if (n <= 0) return(n); /* error or non-blocking */
562 OPENSSL_assert(s->packet_length == DTLS1_RT_HEADER_LENGTH);
564 s->rstate=SSL_ST_READ_BODY;
568 /* Pull apart the header into the DTLS1_RECORD */
572 version=(ssl_major<<8)|ssl_minor;
574 /* sequence number is 64 bits, with top 2 bytes = epoch */
577 memcpy(&(s->s3->read_sequence[2]), p, 6);
582 /* Lets check version */
583 if (!s->first_packet)
585 if (version != s->version)
587 SSLerr(SSL_F_DTLS1_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER);
588 /* Send back error using their
589 * version number :-) */
591 al=SSL_AD_PROTOCOL_VERSION;
596 if ((version & 0xff00) != (DTLS1_VERSION & 0xff00))
598 SSLerr(SSL_F_DTLS1_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER);
602 if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH)
604 al=SSL_AD_RECORD_OVERFLOW;
605 SSLerr(SSL_F_DTLS1_GET_RECORD,SSL_R_PACKET_LENGTH_TOO_LONG);
609 /* now s->rstate == SSL_ST_READ_BODY */
612 /* s->rstate == SSL_ST_READ_BODY, get and decode the data */
614 if (rr->length > s->packet_length-DTLS1_RT_HEADER_LENGTH)
616 /* now s->packet_length == DTLS1_RT_HEADER_LENGTH */
618 n=ssl3_read_n(s,i,i,1);
619 if (n <= 0) return(n); /* error or non-blocking io */
621 /* this packet contained a partial record, dump it */
624 s->packet_length = 0;
628 /* now n == rr->length,
629 * and s->packet_length == DTLS1_RT_HEADER_LENGTH + rr->length */
631 s->rstate=SSL_ST_READ_HEADER; /* set state for later operations */
633 /* match epochs. NULL means the packet is dropped on the floor */
634 bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch);
637 s->packet_length = 0; /* dump this record */
638 goto again; /* get another record */
641 /* check whether this is a repeat, or aged record */
642 if ( ! dtls1_record_replay_check(s, bitmap))
645 s->packet_length=0; /* dump this record */
646 goto again; /* get another record */
649 /* just read a 0 length packet */
650 if (rr->length == 0) goto again;
652 /* If this record is from the next epoch (either HM or ALERT),
653 * buffer it since it cannot be processed at this time. Records
654 * from the next epoch are marked as received even though they
655 * are not processed, so as to prevent any potential resource
659 dtls1_record_bitmap_update(s, bitmap);
660 dtls1_buffer_record(s, &(s->d1->unprocessed_rcds), rr->seq_num);
661 s->packet_length = 0;
665 if ( ! dtls1_process_record(s))
668 dtls1_clear_timeouts(s); /* done waiting */
672 ssl3_send_alert(s,SSL3_AL_FATAL,al);
677 /* Return up to 'len' payload bytes received in 'type' records.
678 * 'type' is one of the following:
680 * - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
681 * - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
682 * - 0 (during a shutdown, no data has to be returned)
684 * If we don't have stored data to work from, read a SSL/TLS record first
685 * (possibly multiple records if we still don't have anything to return).
687 * This function must handle any surprises the peer may have for us, such as
688 * Alert records (e.g. close_notify), ChangeCipherSpec records (not really
689 * a surprise, but handled as if it were), or renegotiation requests.
690 * Also if record payloads contain fragments too small to process, we store
691 * them until there is enough for the respective protocol (the record protocol
692 * may use arbitrary fragmentation and even interleaving):
693 * Change cipher spec protocol
694 * just 1 byte needed, no need for keeping anything stored
696 * 2 bytes needed (AlertLevel, AlertDescription)
698 * 4 bytes needed (HandshakeType, uint24 length) -- we just have
699 * to detect unexpected Client Hello and Hello Request messages
700 * here, anything else is handled by higher layers
701 * Application data protocol
702 * none of our business
704 int dtls1_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
709 void (*cb)(const SSL *ssl,int type2,int val)=NULL;
711 if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
712 if (!ssl3_setup_buffers(s))
715 /* XXX: check what the second '&& type' is about */
716 if ((type && (type != SSL3_RT_APPLICATION_DATA) &&
717 (type != SSL3_RT_HANDSHAKE) && type) ||
718 (peek && (type != SSL3_RT_APPLICATION_DATA)))
720 SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
724 /* check whether there's a handshake message (client hello?) waiting */
725 if ( (ret = have_handshake_fragment(s, type, buf, len, peek)))
728 /* Now s->d1->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */
730 if (!s->in_handshake && SSL_in_init(s))
732 /* type == SSL3_RT_APPLICATION_DATA */
733 i=s->handshake_func(s);
734 if (i < 0) return(i);
737 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
743 s->rwstate=SSL_NOTHING;
745 /* s->s3->rrec.type - is the type of record
746 * s->s3->rrec.data, - data
747 * s->s3->rrec.off, - offset into 'data' for next read
748 * s->s3->rrec.length, - number of bytes. */
751 /* get new packet if necessary */
752 if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY))
754 ret=dtls1_get_record(s);
757 ret = dtls1_read_failed(s, ret);
758 /* anything other than a timeout is an error */
766 /* we now have a packet which can be read and processed */
768 if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
769 * reset by ssl3_get_finished */
770 && (rr->type != SSL3_RT_HANDSHAKE))
772 al=SSL_AD_UNEXPECTED_MESSAGE;
773 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_DATA_BETWEEN_CCS_AND_FINISHED);
777 /* If the other end has shut down, throw anything we read away
778 * (even in 'peek' mode) */
779 if (s->shutdown & SSL_RECEIVED_SHUTDOWN)
782 s->rwstate=SSL_NOTHING;
787 if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */
789 /* make sure that we are not getting application data when we
790 * are doing a handshake for the first time */
791 if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
792 (s->enc_read_ctx == NULL))
794 al=SSL_AD_UNEXPECTED_MESSAGE;
795 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
799 if (len <= 0) return(len);
801 if ((unsigned int)len > rr->length)
804 n = (unsigned int)len;
806 memcpy(buf,&(rr->data[rr->off]),n);
813 s->rstate=SSL_ST_READ_HEADER;
821 /* If we get here, then type != rr->type; if we have a handshake
822 * message, then it was unexpected (Hello Request or Client Hello). */
824 /* In case of record types for which we have 'fragment' storage,
825 * fill that so that we can process the data at a fixed place.
828 unsigned int k, dest_maxlen = 0;
829 unsigned char *dest = NULL;
830 unsigned int *dest_len = NULL;
832 if (rr->type == SSL3_RT_HANDSHAKE)
834 dest_maxlen = sizeof s->d1->handshake_fragment;
835 dest = s->d1->handshake_fragment;
836 dest_len = &s->d1->handshake_fragment_len;
838 else if (rr->type == SSL3_RT_ALERT)
840 dest_maxlen = sizeof(s->d1->alert_fragment);
841 dest = s->d1->alert_fragment;
842 dest_len = &s->d1->alert_fragment_len;
844 /* else it's a CCS message, or it's wrong */
845 else if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC)
847 /* Not certain if this is the right error handling */
848 al=SSL_AD_UNEXPECTED_MESSAGE;
849 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
856 /* XDTLS: In a pathalogical case, the Client Hello
857 * may be fragmented--don't always expect dest_maxlen bytes */
858 if ( rr->length < dest_maxlen)
860 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
862 * for normal alerts rr->length is 2, while
863 * dest_maxlen is 7 if we were to handle this
864 * non-existing alert...
868 s->rstate=SSL_ST_READ_HEADER;
873 /* now move 'n' bytes: */
874 for ( k = 0; k < dest_maxlen; k++)
876 dest[k] = rr->data[rr->off++];
879 *dest_len = dest_maxlen;
883 /* s->d1->handshake_fragment_len == 12 iff rr->type == SSL3_RT_HANDSHAKE;
884 * s->d1->alert_fragment_len == 7 iff rr->type == SSL3_RT_ALERT.
885 * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */
887 /* If we are a client, check for an incoming 'Hello Request': */
889 (s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
890 (s->d1->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
891 (s->session != NULL) && (s->session->cipher != NULL))
893 s->d1->handshake_fragment_len = 0;
895 if ((s->d1->handshake_fragment[1] != 0) ||
896 (s->d1->handshake_fragment[2] != 0) ||
897 (s->d1->handshake_fragment[3] != 0))
899 al=SSL_AD_DECODE_ERROR;
900 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_HELLO_REQUEST);
904 /* no need to check sequence number on HELLO REQUEST messages */
907 s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
908 s->d1->handshake_fragment, 4, s, s->msg_callback_arg);
910 if (SSL_is_init_finished(s) &&
911 !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
915 if (ssl3_renegotiate_check(s))
917 i=s->handshake_func(s);
918 if (i < 0) return(i);
921 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
925 if (!(s->mode & SSL_MODE_AUTO_RETRY))
927 if (s->s3->rbuf.left == 0) /* no read-ahead left? */
930 /* In the case where we try to read application data,
931 * but we trigger an SSL handshake, we return -1 with
932 * the retry option set. Otherwise renegotiation may
933 * cause nasty problems in the blocking world */
934 s->rwstate=SSL_READING;
936 BIO_clear_retry_flags(bio);
937 BIO_set_retry_read(bio);
943 /* we either finished a handshake or ignored the request,
944 * now try again to obtain the (application) data we were asked for */
948 if (s->d1->alert_fragment_len >= DTLS1_AL_HEADER_LENGTH)
950 int alert_level = s->d1->alert_fragment[0];
951 int alert_descr = s->d1->alert_fragment[1];
953 s->d1->alert_fragment_len = 0;
956 s->msg_callback(0, s->version, SSL3_RT_ALERT,
957 s->d1->alert_fragment, 2, s, s->msg_callback_arg);
959 if (s->info_callback != NULL)
961 else if (s->ctx->info_callback != NULL)
962 cb=s->ctx->info_callback;
966 j = (alert_level << 8) | alert_descr;
967 cb(s, SSL_CB_READ_ALERT, j);
970 if (alert_level == 1) /* warning */
972 s->s3->warn_alert = alert_descr;
973 if (alert_descr == SSL_AD_CLOSE_NOTIFY)
975 s->shutdown |= SSL_RECEIVED_SHUTDOWN;
979 /* XXX: this is a possible improvement in the future */
980 /* now check if it's a missing record */
981 if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE)
984 unsigned int frag_off;
985 unsigned char *p = &(s->d1->alert_fragment[2]);
990 dtls1_retransmit_message(s, seq, frag_off, &found);
991 if ( ! found && SSL_in_init(s))
993 /* fprintf( stderr,"in init = %d\n", SSL_in_init(s)); */
994 /* requested a message not yet sent,
995 send an alert ourselves */
996 ssl3_send_alert(s,SSL3_AL_WARNING,
997 DTLS1_AD_MISSING_HANDSHAKE_MESSAGE);
1002 else if (alert_level == 2) /* fatal */
1006 s->rwstate=SSL_NOTHING;
1007 s->s3->fatal_alert = alert_descr;
1008 SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
1009 BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr);
1010 ERR_add_error_data(2,"SSL alert number ",tmp);
1011 s->shutdown|=SSL_RECEIVED_SHUTDOWN;
1012 SSL_CTX_remove_session(s->ctx,s->session);
1017 al=SSL_AD_ILLEGAL_PARAMETER;
1018 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
1025 if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */
1027 s->rwstate=SSL_NOTHING;
1032 if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1034 struct ccs_header_st ccs_hdr;
1036 dtls1_get_ccs_header(rr->data, &ccs_hdr);
1038 /* 'Change Cipher Spec' is just a single byte, so we know
1039 * exactly what the record payload has to look like */
1040 /* XDTLS: check that epoch is consistent */
1041 if ( (rr->length != DTLS1_CCS_HEADER_LENGTH) ||
1042 (rr->off != 0) || (rr->data[0] != SSL3_MT_CCS))
1044 i=SSL_AD_ILLEGAL_PARAMETER;
1045 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
1051 if (s->msg_callback)
1052 s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC,
1053 rr->data, 1, s, s->msg_callback_arg);
1055 s->s3->change_cipher_spec=1;
1056 if (!ssl3_do_change_cipher_spec(s))
1059 /* do this whenever CCS is processed */
1060 dtls1_reset_seq_numbers(s, SSL3_CC_READ);
1065 /* Unexpected handshake message (Client Hello, or protocol violation) */
1066 if ((s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
1069 struct hm_header_st msg_hdr;
1071 /* this may just be a stale retransmit */
1072 dtls1_get_message_header(rr->data, &msg_hdr);
1073 if( rr->epoch != s->d1->r_epoch)
1079 if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
1080 !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
1082 #if 0 /* worked only because C operator preferences are not as expected (and
1083 * because this is not really needed for clients except for detecting
1084 * protocol violations): */
1085 s->state=SSL_ST_BEFORE|(s->server)
1089 s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
1093 i=s->handshake_func(s);
1094 if (i < 0) return(i);
1097 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1101 if (!(s->mode & SSL_MODE_AUTO_RETRY))
1103 if (s->s3->rbuf.left == 0) /* no read-ahead left? */
1106 /* In the case where we try to read application data,
1107 * but we trigger an SSL handshake, we return -1 with
1108 * the retry option set. Otherwise renegotiation may
1109 * cause nasty problems in the blocking world */
1110 s->rwstate=SSL_READING;
1111 bio=SSL_get_rbio(s);
1112 BIO_clear_retry_flags(bio);
1113 BIO_set_retry_read(bio);
1123 #ifndef OPENSSL_NO_TLS
1124 /* TLS just ignores unknown message types */
1125 if (s->version == TLS1_VERSION)
1131 al=SSL_AD_UNEXPECTED_MESSAGE;
1132 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1134 case SSL3_RT_CHANGE_CIPHER_SPEC:
1136 case SSL3_RT_HANDSHAKE:
1137 /* we already handled all of these, with the possible exception
1138 * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that
1139 * should not happen when type != rr->type */
1140 al=SSL_AD_UNEXPECTED_MESSAGE;
1141 SSLerr(SSL_F_DTLS1_READ_BYTES,ERR_R_INTERNAL_ERROR);
1143 case SSL3_RT_APPLICATION_DATA:
1144 /* At this point, we were expecting handshake data,
1145 * but have application data. If the library was
1146 * running inside ssl3_read() (i.e. in_read_app_data
1147 * is set) and it makes sense to read application data
1148 * at this point (session renegotiation not yet started),
1149 * we will indulge it.
1151 if (s->s3->in_read_app_data &&
1152 (s->s3->total_renegotiations != 0) &&
1154 (s->state & SSL_ST_CONNECT) &&
1155 (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
1156 (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
1158 (s->state & SSL_ST_ACCEPT) &&
1159 (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
1160 (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
1164 s->s3->in_read_app_data=2;
1169 al=SSL_AD_UNEXPECTED_MESSAGE;
1170 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1177 ssl3_send_alert(s,SSL3_AL_FATAL,al);
1183 dtls1_write_app_data_bytes(SSL *s, int type, const void *buf_, int len)
1188 if (SSL_in_init(s) && !s->in_handshake)
1190 i=s->handshake_func(s);
1191 if (i < 0) return(i);
1194 SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1204 /* dtls1_write_bytes sends one record at a time, sized according to
1205 * the currently known MTU */
1206 i = dtls1_write_bytes(s, type, buf_, len);
1207 if (i <= 0) return i;
1209 if ((i == (int)n) ||
1210 (type == SSL3_RT_APPLICATION_DATA &&
1211 (s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE)))
1213 /* next chunk of data should get another prepended empty fragment
1214 * in ciphersuites with known-IV weakness: */
1215 s->s3->empty_fragment_done = 0;
1227 /* this only happens when a client hello is received and a handshake
1230 have_handshake_fragment(SSL *s, int type, unsigned char *buf,
1234 if ((type == SSL3_RT_HANDSHAKE) && (s->d1->handshake_fragment_len > 0))
1235 /* (partially) satisfy request from storage */
1237 unsigned char *src = s->d1->handshake_fragment;
1238 unsigned char *dst = buf;
1243 while ((len > 0) && (s->d1->handshake_fragment_len > 0))
1246 len--; s->d1->handshake_fragment_len--;
1249 /* move any remaining fragment bytes: */
1250 for (k = 0; k < s->d1->handshake_fragment_len; k++)
1251 s->d1->handshake_fragment[k] = *src++;
1261 /* Call this to write data in records of type 'type'
1262 * It will return <= 0 if not all data has been sent or non-blocking IO.
1264 int dtls1_write_bytes(SSL *s, int type, const void *buf_, int len)
1266 const unsigned char *buf=buf_;
1267 unsigned int tot,n,nw;
1271 s->rwstate=SSL_NOTHING;
1276 /* handshake layer figures out MTU for itself, but data records
1277 * are also sent through this interface, so need to figure out MTU */
1279 mtu = BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_MTU, 0, NULL);
1280 mtu += DTLS1_HM_HEADER_LENGTH; /* HM already inserted */
1284 if (mtu > SSL3_RT_MAX_PLAIN_LENGTH)
1285 mtu = SSL3_RT_MAX_PLAIN_LENGTH;
1292 i=do_dtls1_write(s, type, &(buf[tot]), nw, 0);
1299 if ( (int)s->s3->wnum + i == len)
1307 int do_dtls1_write(SSL *s, int type, const unsigned char *buf, unsigned int len, int create_empty_fragment)
1309 unsigned char *p,*pseq;
1310 int i,mac_size,clear=0;
1317 /* first check if there is a SSL3_BUFFER still being written
1318 * out. This will happen with non blocking IO */
1319 if (s->s3->wbuf.left != 0)
1321 OPENSSL_assert(0); /* XDTLS: want to see if we ever get here */
1322 return(ssl3_write_pending(s,type,buf,len));
1325 /* If we have an alert to send, lets send it */
1326 if (s->s3->alert_dispatch)
1328 i=s->method->ssl_dispatch_alert(s);
1331 /* if it went, fall through and send more stuff */
1334 if (len == 0 && !create_empty_fragment)
1341 if ( (sess == NULL) ||
1342 (s->enc_write_ctx == NULL) ||
1343 (EVP_MD_CTX_md(s->write_hash) == NULL))
1349 mac_size=EVP_MD_CTX_size(s->write_hash);
1351 /* DTLS implements explicit IV, so no need for empty fragments */
1353 /* 'create_empty_fragment' is true only when this function calls itself */
1354 if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done
1355 && SSL_version(s) != DTLS1_VERSION)
1357 /* countermeasure against known-IV weakness in CBC ciphersuites
1358 * (see http://www.openssl.org/~bodo/tls-cbc.txt)
1361 if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA)
1363 /* recursive function call with 'create_empty_fragment' set;
1364 * this prepares and buffers the data for an empty fragment
1365 * (these 'prefix_len' bytes are sent out later
1366 * together with the actual payload) */
1367 prefix_len = s->method->do_ssl_write(s, type, buf, 0, 1);
1368 if (prefix_len <= 0)
1371 if (s->s3->wbuf.len < (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE)
1373 /* insufficient space */
1374 SSLerr(SSL_F_DO_DTLS1_WRITE, ERR_R_INTERNAL_ERROR);
1379 s->s3->empty_fragment_done = 1;
1383 p = wb->buf + prefix_len;
1385 /* write the header */
1390 *(p++)=(s->version>>8);
1391 *(p++)=s->version&0xff;
1393 /* field where we are to write out packet epoch, seq num and len */
1397 /* lets setup the record stuff. */
1399 /* Make space for the explicit IV in case of CBC.
1400 * (this is a bit of a boundary violation, but what the heck).
1402 if ( s->enc_write_ctx &&
1403 (EVP_CIPHER_mode( s->enc_write_ctx->cipher ) & EVP_CIPH_CBC_MODE))
1404 bs = EVP_CIPHER_block_size(s->enc_write_ctx->cipher);
1408 wr->data=p + bs; /* make room for IV in case of CBC */
1409 wr->length=(int)len;
1410 wr->input=(unsigned char *)buf;
1412 /* we now 'read' from wr->input, wr->length bytes into
1415 /* first we compress */
1416 if (s->compress != NULL)
1418 if (!ssl3_do_compress(s))
1420 SSLerr(SSL_F_DO_DTLS1_WRITE,SSL_R_COMPRESSION_FAILURE);
1426 memcpy(wr->data,wr->input,wr->length);
1430 /* we should still have the output to wr->data and the input
1431 * from wr->input. Length should be wr->length.
1432 * wr->data still points in the wb->buf */
1436 s->method->ssl3_enc->mac(s,&(p[wr->length + bs]),1);
1437 wr->length+=mac_size;
1440 /* this is true regardless of mac size */
1445 /* ssl3_enc can only have an error on read */
1446 if (bs) /* bs != 0 in case of CBC */
1448 RAND_pseudo_bytes(p,bs);
1449 /* master IV and last CBC residue stand for
1450 * the rest of randomness */
1454 s->method->ssl3_enc->enc(s,1);
1456 /* record length after mac and block padding */
1457 /* if (type == SSL3_RT_APPLICATION_DATA ||
1458 (type == SSL3_RT_ALERT && ! SSL_in_init(s))) */
1460 /* there's only one epoch between handshake and app data */
1462 s2n(s->d1->w_epoch, pseq);
1466 s2n(s->d1->handshake_epoch, pseq); */
1468 memcpy(pseq, &(s->s3->write_sequence[2]), 6);
1470 s2n(wr->length,pseq);
1472 /* we should now have
1473 * wr->data pointing to the encrypted data, which is
1474 * wr->length long */
1475 wr->type=type; /* not needed but helps for debugging */
1476 wr->length+=DTLS1_RT_HEADER_LENGTH;
1478 #if 0 /* this is now done at the message layer */
1479 /* buffer the record, making it easy to handle retransmits */
1480 if ( type == SSL3_RT_HANDSHAKE || type == SSL3_RT_CHANGE_CIPHER_SPEC)
1481 dtls1_buffer_record(s, wr->data, wr->length,
1482 *((PQ_64BIT *)&(s->s3->write_sequence[0])));
1485 ssl3_record_sequence_update(&(s->s3->write_sequence[0]));
1487 if (create_empty_fragment)
1489 /* we are in a recursive call;
1490 * just return the length, don't write out anything here
1495 /* now let's set up wb */
1496 wb->left = prefix_len + wr->length;
1499 /* memorize arguments so that ssl3_write_pending can detect bad write retries later */
1500 s->s3->wpend_tot=len;
1501 s->s3->wpend_buf=buf;
1502 s->s3->wpend_type=type;
1503 s->s3->wpend_ret=len;
1505 /* we now just need to write the buffer */
1506 return ssl3_write_pending(s,type,buf,len);
1513 static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap)
1517 const unsigned char *seq = s->s3->read_sequence;
1519 cmp = satsub64be(seq,bitmap->max_seq_num);
1522 memcpy (s->s3->rrec.seq_num,seq,8);
1523 return 1; /* this record in new */
1526 if (shift >= sizeof(bitmap->map)*8)
1527 return 0; /* stale, outside the window */
1528 else if (bitmap->map & (1UL<<shift))
1529 return 0; /* record previously received */
1531 memcpy (s->s3->rrec.seq_num,seq,8);
1536 static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap)
1540 const unsigned char *seq = s->s3->read_sequence;
1542 cmp = satsub64be(seq,bitmap->max_seq_num);
1546 if (shift < sizeof(bitmap->map)*8)
1547 bitmap->map <<= shift, bitmap->map |= 1UL;
1550 memcpy(bitmap->max_seq_num,seq,8);
1554 if (shift < sizeof(bitmap->map)*8)
1555 bitmap->map |= 1UL<<shift;
1560 int dtls1_dispatch_alert(SSL *s)
1563 void (*cb)(const SSL *ssl,int type,int val)=NULL;
1564 unsigned char buf[DTLS1_AL_HEADER_LENGTH];
1565 unsigned char *ptr = &buf[0];
1567 s->s3->alert_dispatch=0;
1569 memset(buf, 0x00, sizeof(buf));
1570 *ptr++ = s->s3->send_alert[0];
1571 *ptr++ = s->s3->send_alert[1];
1573 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1574 if (s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE)
1576 s2n(s->d1->handshake_read_seq, ptr);
1578 if ( s->d1->r_msg_hdr.frag_off == 0) /* waiting for a new msg */
1581 s2n(s->d1->r_msg_hdr.seq, ptr); /* partial msg read */
1585 fprintf(stderr, "s->d1->handshake_read_seq = %d, s->d1->r_msg_hdr.seq = %d\n",s->d1->handshake_read_seq,s->d1->r_msg_hdr.seq);
1587 l2n3(s->d1->r_msg_hdr.frag_off, ptr);
1591 i = do_dtls1_write(s, SSL3_RT_ALERT, &buf[0], sizeof(buf), 0);
1594 s->s3->alert_dispatch=1;
1595 /* fprintf( stderr, "not done with alert\n" ); */
1599 if (s->s3->send_alert[0] == SSL3_AL_FATAL
1600 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1601 || s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1604 (void)BIO_flush(s->wbio);
1606 if (s->msg_callback)
1607 s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert,
1608 2, s, s->msg_callback_arg);
1610 if (s->info_callback != NULL)
1611 cb=s->info_callback;
1612 else if (s->ctx->info_callback != NULL)
1613 cb=s->ctx->info_callback;
1617 j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1];
1618 cb(s,SSL_CB_WRITE_ALERT,j);
1625 static DTLS1_BITMAP *
1626 dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, unsigned int *is_next_epoch)
1631 /* In current epoch, accept HM, CCS, DATA, & ALERT */
1632 if (rr->epoch == s->d1->r_epoch)
1633 return &s->d1->bitmap;
1635 /* Only HM and ALERT messages can be from the next epoch */
1636 else if (rr->epoch == (unsigned long)(s->d1->r_epoch + 1) &&
1637 (rr->type == SSL3_RT_HANDSHAKE ||
1638 rr->type == SSL3_RT_ALERT))
1641 return &s->d1->next_bitmap;
1649 dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr, unsigned short *priority,
1650 unsigned long *offset)
1653 /* alerts are passed up immediately */
1654 if ( rr->type == SSL3_RT_APPLICATION_DATA ||
1655 rr->type == SSL3_RT_ALERT)
1658 /* Only need to buffer if a handshake is underway.
1659 * (this implies that Hello Request and Client Hello are passed up
1661 if ( SSL_in_init(s))
1663 unsigned char *data = rr->data;
1664 /* need to extract the HM/CCS sequence number here */
1665 if ( rr->type == SSL3_RT_HANDSHAKE ||
1666 rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1668 unsigned short seq_num;
1669 struct hm_header_st msg_hdr;
1670 struct ccs_header_st ccs_hdr;
1672 if ( rr->type == SSL3_RT_HANDSHAKE)
1674 dtls1_get_message_header(data, &msg_hdr);
1675 seq_num = msg_hdr.seq;
1676 *offset = msg_hdr.frag_off;
1680 dtls1_get_ccs_header(data, &ccs_hdr);
1681 seq_num = ccs_hdr.seq;
1685 /* this is either a record we're waiting for, or a
1686 * retransmit of something we happened to previously
1687 * receive (higher layers will drop the repeat silently */
1688 if ( seq_num < s->d1->handshake_read_seq)
1690 if (rr->type == SSL3_RT_HANDSHAKE &&
1691 seq_num == s->d1->handshake_read_seq &&
1692 msg_hdr.frag_off < s->d1->r_msg_hdr.frag_off)
1694 else if ( seq_num == s->d1->handshake_read_seq &&
1695 (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC ||
1696 msg_hdr.frag_off == s->d1->r_msg_hdr.frag_off))
1700 *priority = seq_num;
1704 else /* unknown record type */
1713 dtls1_reset_seq_numbers(SSL *s, int rw)
1716 unsigned int seq_bytes = sizeof(s->s3->read_sequence);
1718 if ( rw & SSL3_CC_READ)
1720 seq = s->s3->read_sequence;
1722 memcpy(&(s->d1->bitmap), &(s->d1->next_bitmap), sizeof(DTLS1_BITMAP));
1723 memset(&(s->d1->next_bitmap), 0x00, sizeof(DTLS1_BITMAP));
1727 seq = s->s3->write_sequence;
1731 memset(seq, 0x00, seq_bytes);
1736 dtls1_clear_timeouts(SSL *s)
1738 memset(&(s->d1->timeout), 0x00, sizeof(struct dtls1_timeout_st));