1 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
4 * This package is an SSL implementation written
5 * by Eric Young (eay@cryptsoft.com).
6 * The implementation was written so as to conform with Netscapes SSL.
8 * This library is free for commercial and non-commercial use as long as
9 * the following conditions are aheared to. The following conditions
10 * apply to all code found in this distribution, be it the RC4, RSA,
11 * lhash, DES, etc., code; not just the SSL code. The SSL documentation
12 * included with this distribution is covered by the same copyright terms
13 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
15 * Copyright remains Eric Young's, and as such any Copyright notices in
16 * the code are not to be removed.
17 * If this package is used in a product, Eric Young should be given attribution
18 * as the author of the parts of the library used.
19 * This can be in the form of a textual message at program startup or
20 * in documentation (online or textual) provided with the package.
22 * Redistribution and use in source and binary forms, with or without
23 * modification, are permitted provided that the following conditions
25 * 1. Redistributions of source code must retain the copyright
26 * notice, this list of conditions and the following disclaimer.
27 * 2. Redistributions in binary form must reproduce the above copyright
28 * notice, this list of conditions and the following disclaimer in the
29 * documentation and/or other materials provided with the distribution.
30 * 3. All advertising materials mentioning features or use of this software
31 * must display the following acknowledgement:
32 * "This product includes cryptographic software written by
33 * Eric Young (eay@cryptsoft.com)"
34 * The word 'cryptographic' can be left out if the rouines from the library
35 * being used are not cryptographic related :-).
36 * 4. If you include any Windows specific code (or a derivative thereof) from
37 * the apps directory (application code) you must include an acknowledgement:
38 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
40 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
41 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
43 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
44 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
45 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
46 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
48 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
49 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
52 * The licence and distribution terms for any publically available version or
53 * derivative of this code cannot be changed. i.e. this code cannot simply be
54 * copied and put under another distribution licence
55 * [including the GNU Public Licence.]
57 /* ====================================================================
58 * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
60 * Redistribution and use in source and binary forms, with or without
61 * modification, are permitted provided that the following conditions
64 * 1. Redistributions of source code must retain the above copyright
65 * notice, this list of conditions and the following disclaimer.
67 * 2. Redistributions in binary form must reproduce the above copyright
68 * notice, this list of conditions and the following disclaimer in
69 * the documentation and/or other materials provided with the
72 * 3. All advertising materials mentioning features or use of this
73 * software must display the following acknowledgment:
74 * "This product includes software developed by the OpenSSL Project
75 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
77 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
78 * endorse or promote products derived from this software without
79 * prior written permission. For written permission, please contact
80 * openssl-core@openssl.org.
82 * 5. Products derived from this software may not be called "OpenSSL"
83 * nor may "OpenSSL" appear in their names without prior written
84 * permission of the OpenSSL Project.
86 * 6. Redistributions of any form whatsoever must retain the following
88 * "This product includes software developed by the OpenSSL Project
89 * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
91 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
92 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
93 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
94 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
95 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
96 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
97 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
98 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
99 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
100 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
101 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
102 * OF THE POSSIBILITY OF SUCH DAMAGE.
103 * ====================================================================
105 * This product includes cryptographic software written by Eric Young
106 * (eay@cryptsoft.com). This product includes software written by Tim
107 * Hudson (tjh@cryptsoft.com).
110 /* ====================================================================
111 * Copyright 2005 Nokia. All rights reserved.
113 * The portions of the attached software ("Contribution") is developed by
114 * Nokia Corporation and is licensed pursuant to the OpenSSL open source
117 * The Contribution, originally written by Mika Kousa and Pasi Eronen of
118 * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
119 * support (see RFC 4279) to OpenSSL.
121 * No patent licenses or other rights except those expressly stated in
122 * the OpenSSL open source license shall be deemed granted or received
123 * expressly, by implication, estoppel, or otherwise.
125 * No assurances are provided by Nokia that the Contribution does not
126 * infringe the patent or other intellectual property rights of any third
127 * party or that the license provides you with all the necessary rights
128 * to make use of the Contribution.
130 * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
131 * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
132 * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
133 * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
142 #include <openssl/e_os2.h>
145 * With IPv6, it looks like Digital has mixed up the proper order of
146 * recursive header file inclusion, resulting in the compiler complaining
147 * that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which is
148 * needed to have fileno() declared correctly... So let's define u_int
150 #if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
152 typedef unsigned int u_int;
157 #include <openssl/x509.h>
158 #include <openssl/ssl.h>
159 #include <openssl/err.h>
160 #include <openssl/pem.h>
161 #include <openssl/rand.h>
162 #include <openssl/ocsp.h>
163 #include <openssl/bn.h>
164 #ifndef OPENSSL_NO_SRP
165 # include <openssl/srp.h>
168 #include "timeouts.h"
170 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
171 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
175 #define SSL_HOST_NAME "localhost"
178 #define BUFSIZZ 1024*8
180 extern int verify_depth;
181 extern int verify_error;
182 extern int verify_return_error;
183 extern int verify_quiet;
185 static int c_nbio = 0;
186 static int c_tlsextdebug = 0;
187 static int c_status_req = 0;
188 static int c_Pause = 0;
189 static int c_debug = 0;
190 static int c_msg = 0;
191 static int c_showcerts = 0;
192 static char *keymatexportlabel = NULL;
193 static int keymatexportlen = 20;
194 static BIO *bio_c_out = NULL;
195 static BIO *bio_c_msg = NULL;
196 static int c_quiet = 0;
197 static int c_ign_eof = 0;
198 static int c_brief = 0;
200 static void print_stuff(BIO *berr, SSL *con, int full);
201 #ifndef OPENSSL_NO_TLSEXT
202 static int ocsp_resp_cb(SSL *s, void *arg);
205 #ifndef OPENSSL_NO_PSK
206 /* Default PSK identity and key */
207 static char *psk_identity = "Client_identity";
209 * char *psk_key=NULL; by default PSK is not used
212 static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity,
213 unsigned int max_identity_len,
215 unsigned int max_psk_len)
217 unsigned int psk_len = 0;
222 BIO_printf(bio_c_out, "psk_client_cb\n");
224 /* no ServerKeyExchange message */
226 BIO_printf(bio_c_out,
227 "NULL received PSK identity hint, continuing anyway\n");
229 BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint);
232 * lookup PSK identity and PSK key based on the given identity hint here
234 ret = BIO_snprintf(identity, max_identity_len, "%s", psk_identity);
235 if (ret < 0 || (unsigned int)ret > max_identity_len)
238 BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity,
240 ret = BN_hex2bn(&bn, psk_key);
242 BIO_printf(bio_err, "Could not convert PSK key '%s' to BIGNUM\n",
248 if ((unsigned int)BN_num_bytes(bn) > max_psk_len) {
250 "psk buffer of callback is too small (%d) for key (%d)\n",
251 max_psk_len, BN_num_bytes(bn));
256 psk_len = BN_bn2bin(bn, psk);
262 BIO_printf(bio_c_out, "created PSK len=%d\n", psk_len);
267 BIO_printf(bio_err, "Error in PSK client callback\n");
272 #ifndef OPENSSL_NO_TLSEXT
274 /* This is a context that we pass to callbacks */
275 typedef struct tlsextctx_st {
280 static int ssl_servername_cb(SSL *s, int *ad, void *arg)
282 tlsextctx *p = (tlsextctx *) arg;
283 const char *hn = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
284 if (SSL_get_servername_type(s) != -1)
285 p->ack = !SSL_session_reused(s) && hn != NULL;
287 BIO_printf(bio_err, "Can't use SSL_get_servername\n");
289 return SSL_TLSEXT_ERR_OK;
292 # ifndef OPENSSL_NO_SRP
294 /* This is a context that we pass to all callbacks */
295 typedef struct srp_arg_st {
298 int msg; /* copy from c_msg */
299 int debug; /* copy from c_debug */
300 int amp; /* allow more groups */
301 int strength /* minimal size for N */ ;
304 # define SRP_NUMBER_ITERATIONS_FOR_PRIME 64
306 static int srp_Verify_N_and_g(const BIGNUM *N, const BIGNUM *g)
308 BN_CTX *bn_ctx = BN_CTX_new();
309 BIGNUM *p = BN_new();
310 BIGNUM *r = BN_new();
312 g != NULL && N != NULL && bn_ctx != NULL && BN_is_odd(N) &&
313 BN_is_prime_ex(N, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
314 p != NULL && BN_rshift1(p, N) &&
316 BN_is_prime_ex(p, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
318 /* verify g^((N-1)/2) == -1 (mod N) */
319 BN_mod_exp(r, g, p, N, bn_ctx) &&
320 BN_add_word(r, 1) && BN_cmp(r, N) == 0;
329 * This callback is used here for two purposes:
330 * - extended debugging
331 * - making some primality tests for unknown groups
332 * The callback is only called for a non default group.
334 * An application does not need the call back at all if
335 * only the stanard groups are used. In real life situations,
336 * client and server already share well known groups,
337 * thus there is no need to verify them.
338 * Furthermore, in case that a server actually proposes a group that
339 * is not one of those defined in RFC 5054, it is more appropriate
340 * to add the group to a static list and then compare since
341 * primality tests are rather cpu consuming.
344 static int ssl_srp_verify_param_cb(SSL *s, void *arg)
346 SRP_ARG *srp_arg = (SRP_ARG *)arg;
347 BIGNUM *N = NULL, *g = NULL;
349 if (((N = SSL_get_srp_N(s)) == NULL) || ((g = SSL_get_srp_g(s)) == NULL))
351 if (srp_arg->debug || srp_arg->msg || srp_arg->amp == 1) {
352 BIO_printf(bio_err, "SRP parameters:\n");
353 BIO_printf(bio_err, "\tN=");
354 BN_print(bio_err, N);
355 BIO_printf(bio_err, "\n\tg=");
356 BN_print(bio_err, g);
357 BIO_printf(bio_err, "\n");
360 if (SRP_check_known_gN_param(g, N))
363 if (srp_arg->amp == 1) {
366 "SRP param N and g are not known params, going to check deeper.\n");
369 * The srp_moregroups is a real debugging feature. Implementors
370 * should rather add the value to the known ones. The minimal size
371 * has already been tested.
373 if (BN_num_bits(g) <= BN_BITS && srp_Verify_N_and_g(N, g))
376 BIO_printf(bio_err, "SRP param N and g rejected.\n");
380 # define PWD_STRLEN 1024
382 static char *ssl_give_srp_client_pwd_cb(SSL *s, void *arg)
384 SRP_ARG *srp_arg = (SRP_ARG *)arg;
385 char *pass = app_malloc(PWD_STRLEN + 1, "SRP password buffer");
389 cb_tmp.password = (char *)srp_arg->srppassin;
390 cb_tmp.prompt_info = "SRP user";
391 if ((l = password_callback(pass, PWD_STRLEN, 0, &cb_tmp)) < 0) {
392 BIO_printf(bio_err, "Can't read Password\n");
403 char *srtp_profiles = NULL;
405 # ifndef OPENSSL_NO_NEXTPROTONEG
406 /* This the context that we pass to next_proto_cb */
407 typedef struct tlsextnextprotoctx_st {
411 } tlsextnextprotoctx;
413 static tlsextnextprotoctx next_proto;
415 static int next_proto_cb(SSL *s, unsigned char **out, unsigned char *outlen,
416 const unsigned char *in, unsigned int inlen,
419 tlsextnextprotoctx *ctx = arg;
422 /* We can assume that |in| is syntactically valid. */
424 BIO_printf(bio_c_out, "Protocols advertised by server: ");
425 for (i = 0; i < inlen;) {
427 BIO_write(bio_c_out, ", ", 2);
428 BIO_write(bio_c_out, &in[i + 1], in[i]);
431 BIO_write(bio_c_out, "\n", 1);
435 SSL_select_next_proto(out, outlen, in, inlen, ctx->data, ctx->len);
436 return SSL_TLSEXT_ERR_OK;
438 # endif /* ndef OPENSSL_NO_NEXTPROTONEG */
440 static int serverinfo_cli_parse_cb(SSL *s, unsigned int ext_type,
441 const unsigned char *in, size_t inlen,
445 unsigned char ext_buf[4 + 65536];
447 /* Reconstruct the type/len fields prior to extension data */
448 ext_buf[0] = ext_type >> 8;
449 ext_buf[1] = ext_type & 0xFF;
450 ext_buf[2] = inlen >> 8;
451 ext_buf[3] = inlen & 0xFF;
452 memcpy(ext_buf + 4, in, inlen);
454 BIO_snprintf(pem_name, sizeof(pem_name), "SERVERINFO FOR EXTENSION %d",
456 PEM_write_bio(bio_c_out, pem_name, "", ext_buf, 4 + inlen);
462 typedef enum OPTION_choice {
463 OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
464 OPT_HOST, OPT_PORT, OPT_CONNECT, OPT_UNIX, OPT_XMPPHOST, OPT_VERIFY,
465 OPT_CERT, OPT_CRL, OPT_CRL_DOWNLOAD, OPT_SESS_OUT, OPT_SESS_IN,
466 OPT_CERTFORM, OPT_CRLFORM, OPT_VERIFY_RET_ERROR, OPT_VERIFY_QUIET,
467 OPT_BRIEF, OPT_PREXIT, OPT_CRLF, OPT_QUIET, OPT_NBIO,
468 OPT_SSL_CLIENT_ENGINE, OPT_RAND, OPT_IGN_EOF, OPT_NO_IGN_EOF,
469 OPT_PAUSE, OPT_DEBUG, OPT_TLSEXTDEBUG, OPT_STATUS, OPT_WDEBUG,
470 OPT_MSG, OPT_MSGFILE, OPT_ENGINE, OPT_TRACE, OPT_SECURITY_DEBUG,
471 OPT_SECURITY_DEBUG_VERBOSE, OPT_SHOWCERTS, OPT_NBIO_TEST, OPT_STATE,
472 OPT_PSK_IDENTITY, OPT_PSK, OPT_SRPUSER, OPT_SRPPASS, OPT_SRP_STRENGTH,
473 OPT_SRP_LATEUSER, OPT_SRP_MOREGROUPS, OPT_SSL3,
474 OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1,
475 OPT_DTLS1_2, OPT_TIMEOUT, OPT_MTU, OPT_KEYFORM, OPT_PASS,
476 OPT_CERT_CHAIN, OPT_CAPATH, OPT_CHAINCAPATH, OPT_VERIFYCAPATH,
477 OPT_KEY, OPT_RECONNECT, OPT_BUILD_CHAIN, OPT_CAFILE,
478 OPT_CHAINCAFILE, OPT_VERIFYCAFILE, OPT_NEXTPROTONEG, OPT_ALPN,
479 OPT_SERVERINFO, OPT_STARTTLS, OPT_SERVERNAME, OPT_JPAKE,
480 OPT_USE_SRTP, OPT_KEYMATEXPORT, OPT_KEYMATEXPORTLEN, OPT_SMTPHOST,
484 OPT_FALLBACKSCSV, OPT_NOCMDS
487 OPTIONS s_client_options[] = {
488 {"help", OPT_HELP, '-', "Display this summary"},
489 {"host", OPT_HOST, 's', "Use -connect instead"},
490 {"port", OPT_PORT, 'p', "Use -connect instead"},
491 {"connect", OPT_CONNECT, 's',
492 "TCP/IP where to connect (default is " SSL_HOST_NAME ":" PORT_STR ")"},
493 {"unix", OPT_UNIX, 's', "Connect over unix domain sockets"},
494 {"verify", OPT_VERIFY, 'p', "Turn on peer certificate verification"},
495 {"cert", OPT_CERT, '<', "Certificate file to use, PEM format assumed"},
496 {"certform", OPT_CERTFORM, 'F',
497 "Certificate format (PEM or DER) PEM default"},
498 {"key", OPT_KEY, '<', "Private key file to use, if not in -cert file"},
499 {"keyform", OPT_KEYFORM, 'F', "Key format (PEM or DER) PEM default"},
500 {"pass", OPT_PASS, 's', "Private key file pass phrase source"},
501 {"CApath", OPT_CAPATH, '/', "PEM format directory of CA's"},
502 {"CAfile", OPT_CAFILE, '<', "PEM format file of CA's"},
503 {"reconnect", OPT_RECONNECT, '-',
504 "Drop and re-make the connection with the same Session-ID"},
505 {"pause", OPT_PAUSE, '-', "Sleep after each read and write system call"},
506 {"showcerts", OPT_SHOWCERTS, '-', "Show all certificates in the chain"},
507 {"debug", OPT_DEBUG, '-', "Extra output"},
508 {"msg", OPT_MSG, '-', "Show protocol messages"},
509 {"msgfile", OPT_MSGFILE, '>'},
510 {"nbio_test", OPT_NBIO_TEST, '-', "More ssl protocol testing"},
511 {"state", OPT_STATE, '-', "Print the ssl states"},
512 {"crlf", OPT_CRLF, '-', "Convert LF from terminal into CRLF"},
513 {"quiet", OPT_QUIET, '-', "No s_client output"},
514 {"ign_eof", OPT_IGN_EOF, '-', "Ignore input eof (default when -quiet)"},
515 {"no_ign_eof", OPT_NO_IGN_EOF, '-', "Don't ignore input eof"},
516 #ifndef OPENSSL_NO_SSL3
517 {"ssl3", OPT_SSL3, '-', "Just use SSLv3"},
519 {"tls1_2", OPT_TLS1_2, '-', "Just use TLSv1.2"},
520 {"tls1_1", OPT_TLS1_1, '-', "Just use TLSv1.1"},
521 {"tls1", OPT_TLS1, '-', "Just use TLSv1"},
522 {"dtls", OPT_DTLS, '-'},
523 {"dtls1", OPT_DTLS1, '-', "Just use DTLSv1"},
524 {"dtls1_2", OPT_DTLS1_2, '-'},
525 {"timeout", OPT_TIMEOUT, '-'},
526 {"mtu", OPT_MTU, 'p', "Set the link layer MTU"},
527 {"starttls", OPT_STARTTLS, 's',
528 "Use the STARTTLS command before starting TLS"},
529 {"xmpphost", OPT_XMPPHOST, 's', "Host to use with \"-starttls xmpp\""},
530 {"rand", OPT_RAND, 's',
531 "Load the file(s) into the random number generator"},
532 {"sess_out", OPT_SESS_OUT, '>', "File to write SSL session to"},
533 {"sess_in", OPT_SESS_IN, '<', "File to read SSL session from"},
534 {"use_srtp", OPT_USE_SRTP, '<',
535 "Offer SRTP key management with a colon-separated profile list"},
536 {"keymatexport", OPT_KEYMATEXPORT, 's',
537 "Export keying material using label"},
538 {"keymatexportlen", OPT_KEYMATEXPORTLEN, 'p',
539 "Export len bytes of keying material (default 20)"},
540 {"fallback_scsv", OPT_FALLBACKSCSV, '-', "Send the fallback SCSV"},
542 {"wdebug", OPT_WDEBUG, '-', "WATT-32 tcp debugging"},
545 {"nbio", OPT_NBIO, '-', "Use non-blocking IO"},
547 #ifndef OPENSSL_NO_PSK
548 {"psk_identity", OPT_PSK_IDENTITY, 's', "PSK identity"},
549 {"psk", OPT_PSK, 's', "PSK in hex (without 0x)"},
550 # ifndef OPENSSL_NO_JPAKE
551 {"jpake", OPT_JPAKE, 's', "JPAKE secret to use"},
554 #ifndef OPENSSL_NO_SRP
555 {"srpuser", OPT_SRPUSER, 's', "SRP authentification for 'user'"},
556 {"srppass", OPT_SRPPASS, 's', "Password for 'user'"},
557 {"srp_lateuser", OPT_SRP_LATEUSER, '-',
558 "SRP username into second ClientHello message"},
559 {"srp_moregroups", OPT_SRP_MOREGROUPS, '-',
560 "Tolerate other than the known g N values."},
561 {"srp_strength", OPT_SRP_STRENGTH, 'p', "Minimal mength in bits for N"},
563 {"name", OPT_SMTPHOST, 's', "Hostname to use for \"-starttls smtp\""},
564 #ifndef OPENSSL_NO_TLSEXT
565 {"servername", OPT_SERVERNAME, 's',
566 "Set TLS extension servername in ClientHello"},
567 {"tlsextdebug", OPT_TLSEXTDEBUG, '-',
568 "Hex dump of all TLS extensions received"},
569 {"status", OPT_STATUS, '-', "Request certificate status from server"},
570 {"serverinfo", OPT_SERVERINFO, 's',
571 "types Send empty ClientHello extensions (comma-separated numbers)"},
572 {"alpn", OPT_ALPN, 's',
573 "Enable ALPN extension, considering named protocols supported (comma-separated list)"},
574 # ifndef OPENSSL_NO_NEXTPROTONEG
575 {"nextprotoneg", OPT_NEXTPROTONEG, 's',
576 "Enable NPN extension, considering named protocols supported (comma-separated list)"},
579 {"CRL", OPT_CRL, '<'},
580 {"crl_download", OPT_CRL_DOWNLOAD, '-'},
581 {"CRLform", OPT_CRLFORM, 'F'},
582 {"verify_return_error", OPT_VERIFY_RET_ERROR, '-'},
583 {"verify_quiet", OPT_VERIFY_QUIET, '-'},
584 {"brief", OPT_BRIEF, '-'},
585 {"prexit", OPT_PREXIT, '-'},
586 {"trace", OPT_TRACE, '-'},
587 {"security_debug", OPT_SECURITY_DEBUG, '-'},
588 {"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-'},
589 {"cert_chain", OPT_CERT_CHAIN, '<'},
590 {"chainCApath", OPT_CHAINCAPATH, '/'},
591 {"verifyCApath", OPT_VERIFYCAPATH, '/'},
592 {"build_chain", OPT_BUILD_CHAIN, '-'},
593 {"chainCAfile", OPT_CHAINCAFILE, '<'},
594 {"verifyCAfile", OPT_VERIFYCAFILE, '<'},
595 {"nocommands", OPT_NOCMDS, '-', "Do not use interactive command letters"},
596 #ifndef OPENSSL_NO_ENGINE
597 {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
598 {"ssl_client_engine", OPT_SSL_CLIENT_ENGINE, 's'},
606 typedef enum PROTOCOL_choice {
616 static OPT_PAIR services[] = {
617 {"smtp", PROTO_SMTP},
618 {"pop3", PROTO_POP3},
619 {"imap", PROTO_IMAP},
621 {"xmpp", PROTO_XMPP},
622 {"telnet", PROTO_TELNET},
626 int s_client_main(int argc, char **argv)
629 EVP_PKEY *key = NULL;
632 STACK_OF(X509) *chain = NULL;
634 X509_VERIFY_PARAM *vpm = NULL;
635 SSL_EXCERT *exc = NULL;
636 SSL_CONF_CTX *cctx = NULL;
637 STACK_OF(OPENSSL_STRING) *ssl_args = NULL;
638 STACK_OF(X509_CRL) *crls = NULL;
639 const SSL_METHOD *meth = TLS_client_method();
640 char *CApath = NULL, *CAfile = NULL, *cbuf = NULL, *sbuf = NULL, *mbuf =
642 char *cert_file = NULL, *key_file = NULL, *chain_file = NULL, *prog;
643 char *chCApath = NULL, *chCAfile = NULL, *host = SSL_HOST_NAME, *inrand =
645 char *passarg = NULL, *pass = NULL, *vfyCApath = NULL, *vfyCAfile = NULL;
646 char *sess_in = NULL, *sess_out = NULL, *crl_file = NULL, *p;
647 char *jpake_secret = NULL, *xmpphost = NULL;
648 const char *unix_path = NULL;
649 const char *ehlo = "mail.example.com";
650 struct sockaddr peer;
651 struct timeval timeout, *timeoutp;
652 fd_set readfds, writefds;
653 int build_chain = 0, cbuf_len, cbuf_off, cert_format = FORMAT_PEM;
654 int key_format = FORMAT_PEM, crlf = 0, full_log = 1, mbuf_len = 0;
656 int enable_timeouts = 0, sdebug = 0, peerlen = sizeof peer;
657 int reconnect = 0, verify = SSL_VERIFY_NONE, vpmtouched = 0;
658 int ret = 1, in_init = 1, i, nbio_test = 0, s, k, width, state = 0;
659 int sbuf_len, sbuf_off, socket_type = SOCK_STREAM, cmdletters = 1;
660 int starttls_proto = PROTO_OFF, crl_format = FORMAT_PEM, crl_download = 0;
661 int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending;
662 int fallback_scsv = 0;
663 long socket_mtu = 0, randamt = 0;
664 unsigned short port = PORT;
666 #ifndef OPENSSL_NO_ENGINE
667 ENGINE *ssl_client_engine = NULL;
670 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
673 #ifndef OPENSSL_NO_TLSEXT
674 char *servername = NULL;
675 const char *alpn_in = NULL;
676 tlsextctx tlsextcbp = { NULL, 0 };
677 # define MAX_SI_TYPES 100
678 unsigned short serverinfo_types[MAX_SI_TYPES];
679 int serverinfo_count = 0, start = 0, len;
680 # ifndef OPENSSL_NO_NEXTPROTONEG
681 const char *next_proto_neg_in = NULL;
684 #ifndef OPENSSL_NO_SRP
685 char *srppass = NULL;
686 int srp_lateuser = 0;
687 SRP_ARG srp_arg = { NULL, NULL, 0, 0, 0, 1024 };
690 prog = opt_progname(argv[0]);
699 verify_error = X509_V_OK;
700 vpm = X509_VERIFY_PARAM_new();
701 cbuf = app_malloc(BUFSIZZ, "cbuf");
702 sbuf = app_malloc(BUFSIZZ, "sbuf");
703 mbuf = app_malloc(BUFSIZZ, "mbuf");
704 cctx = SSL_CONF_CTX_new();
706 if (vpm == NULL || cctx == NULL) {
707 BIO_printf(bio_err, "%s: out of memory\n", prog);
711 SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_CLIENT | SSL_CONF_FLAG_CMDLINE);
713 prog = opt_init(argc, argv, s_client_options);
714 while ((o = opt_next()) != OPT_EOF) {
719 #ifdef OPENSSL_NO_JPAKE
722 #ifdef OPENSSL_NO_SSL_TRACE
725 #ifdef OPENSSL_NO_PSK
726 case OPT_PSK_IDENTITY:
729 #ifdef OPENSSL_NO_SSL3
732 #ifdef OPENSSL_NO_DTLS1
742 BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
745 opt_help(s_client_options);
752 port = atoi(opt_arg());
755 if (!extract_host_port(opt_arg(), &host, NULL, &port))
759 unix_path = opt_arg();
762 xmpphost = opt_arg();
768 verify = SSL_VERIFY_PEER;
769 verify_depth = atoi(opt_arg());
771 BIO_printf(bio_err, "verify depth is %d\n", verify_depth);
774 cert_file = opt_arg();
777 crl_file = opt_arg();
779 case OPT_CRL_DOWNLOAD:
783 sess_out = opt_arg();
789 if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &cert_format))
793 if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &crl_format))
796 case OPT_VERIFY_RET_ERROR:
797 verify_return_error = 1;
799 case OPT_VERIFY_QUIET:
803 c_brief = verify_quiet = c_quiet = 1;
806 if (ssl_args == NULL)
807 ssl_args = sk_OPENSSL_STRING_new_null();
809 || !sk_OPENSSL_STRING_push(ssl_args, opt_flag())
810 || !sk_OPENSSL_STRING_push(ssl_args, opt_arg())) {
811 BIO_printf(bio_err, "%s: Memory allocation failure\n", prog);
816 if (!opt_verify(o, vpm))
821 if (!args_excert(o, &exc))
831 c_quiet = c_ign_eof = 1;
840 e = setup_engine(opt_arg(), 1);
842 case OPT_SSL_CLIENT_ENGINE:
843 #ifndef OPENSSL_NO_ENGINE
844 ssl_client_engine = ENGINE_by_id(opt_arg());
845 if (ssl_client_engine == NULL) {
846 BIO_printf(bio_err, "Error getting client auth engine\n");
867 #ifndef OPENSSL_NO_TLSEXT
868 case OPT_TLSEXTDEBUG:
884 bio_c_msg = BIO_new_file(opt_arg(), "w");
886 #ifndef OPENSSL_NO_SSL_TRACE
891 case OPT_SECURITY_DEBUG:
894 case OPT_SECURITY_DEBUG_VERBOSE:
906 #ifndef OPENSSL_NO_PSK
907 case OPT_PSK_IDENTITY:
908 psk_identity = opt_arg();
911 for (p = psk_key = opt_arg(); *p; p++) {
914 BIO_printf(bio_err, "Not a hex number '%s'\n", psk_key);
919 #ifndef OPENSSL_NO_SRP
921 srp_arg.srplogin = opt_arg();
922 meth = TLSv1_client_method();
926 meth = TLSv1_client_method();
928 case OPT_SRP_STRENGTH:
929 srp_arg.strength = atoi(opt_arg());
930 BIO_printf(bio_err, "SRP minimal length for N is %d\n",
932 meth = TLSv1_client_method();
934 case OPT_SRP_LATEUSER:
936 meth = TLSv1_client_method();
938 case OPT_SRP_MOREGROUPS:
940 meth = TLSv1_client_method();
945 case OPT_SRP_STRENGTH:
946 case OPT_SRP_LATEUSER:
947 case OPT_SRP_MOREGROUPS:
950 #ifndef OPENSSL_NO_SSL3
952 meth = SSLv3_client_method();
956 meth = TLSv1_2_client_method();
959 meth = TLSv1_1_client_method();
962 meth = TLSv1_client_method();
964 #ifndef OPENSSL_NO_DTLS1
966 meth = DTLS_client_method();
967 socket_type = SOCK_DGRAM;
970 meth = DTLSv1_client_method();
971 socket_type = SOCK_DGRAM;
974 meth = DTLSv1_2_client_method();
975 socket_type = SOCK_DGRAM;
981 socket_mtu = atol(opt_arg());
984 case OPT_FALLBACKSCSV:
988 if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &key_format))
995 chain_file = opt_arg();
998 key_file = opt_arg();
1006 case OPT_CHAINCAPATH:
1007 chCApath = opt_arg();
1009 case OPT_VERIFYCAPATH:
1010 vfyCApath = opt_arg();
1012 case OPT_BUILD_CHAIN:
1018 case OPT_CHAINCAFILE:
1019 chCAfile = opt_arg();
1021 case OPT_VERIFYCAFILE:
1022 vfyCAfile = opt_arg();
1024 #ifndef OPENSSL_NO_TLSEXT
1025 case OPT_NEXTPROTONEG:
1026 next_proto_neg_in = opt_arg();
1029 alpn_in = opt_arg();
1031 case OPT_SERVERINFO:
1034 for (start = 0, i = 0; i <= len; ++i) {
1035 if (i == len || p[i] == ',') {
1036 serverinfo_types[serverinfo_count] = atoi(p + start);
1037 if (++serverinfo_count == MAX_SI_TYPES)
1045 if (!opt_pair(opt_arg(), services, &starttls_proto))
1047 #ifndef OPENSSL_NO_TLSEXT
1048 case OPT_SERVERNAME:
1049 servername = opt_arg();
1050 /* meth=TLSv1_client_method(); */
1053 #ifndef OPENSSL_NO_JPAKE
1055 jpake_secret = opt_arg();
1059 srtp_profiles = opt_arg();
1061 case OPT_KEYMATEXPORT:
1062 keymatexportlabel = opt_arg();
1064 case OPT_KEYMATEXPORTLEN:
1065 keymatexportlen = atoi(opt_arg());
1069 argc = opt_num_rest();
1072 if (unix_path && (socket_type != SOCK_STREAM)) {
1074 "Can't use unix sockets and datagrams together\n");
1077 #if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
1080 BIO_printf(bio_err, "Can't use JPAKE and PSK together\n");
1083 psk_identity = "JPAKE";
1087 #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
1088 next_proto.status = -1;
1089 if (next_proto_neg_in) {
1091 next_protos_parse(&next_proto.len, next_proto_neg_in);
1092 if (next_proto.data == NULL) {
1093 BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n");
1097 next_proto.data = NULL;
1100 if (!app_passwd(passarg, NULL, &pass, NULL)) {
1101 BIO_printf(bio_err, "Error getting password\n");
1105 if (key_file == NULL)
1106 key_file = cert_file;
1109 key = load_key(key_file, key_format, 0, pass, e,
1110 "client certificate private key file");
1112 ERR_print_errors(bio_err);
1118 cert = load_cert(cert_file, cert_format,
1119 NULL, e, "client certificate file");
1121 ERR_print_errors(bio_err);
1127 chain = load_certs(chain_file, FORMAT_PEM,
1128 NULL, e, "client certificate chain");
1135 crl = load_crl(crl_file, crl_format);
1137 BIO_puts(bio_err, "Error loading CRL\n");
1138 ERR_print_errors(bio_err);
1141 crls = sk_X509_CRL_new_null();
1142 if (crls == NULL || !sk_X509_CRL_push(crls, crl)) {
1143 BIO_puts(bio_err, "Error adding CRL\n");
1144 ERR_print_errors(bio_err);
1150 if (!load_excert(&exc))
1153 if (!app_RAND_load_file(NULL, 1) && inrand == NULL
1154 && !RAND_status()) {
1156 "warning, not much extra random data, consider using the -rand option\n");
1158 if (inrand != NULL) {
1159 randamt = app_RAND_load_files(inrand);
1160 BIO_printf(bio_err, "%ld semi-random bytes loaded\n", randamt);
1163 if (bio_c_out == NULL) {
1164 if (c_quiet && !c_debug) {
1165 bio_c_out = BIO_new(BIO_s_null());
1166 if (c_msg && !bio_c_msg)
1167 bio_c_msg = dup_bio_out();
1168 } else if (bio_c_out == NULL)
1169 bio_c_out = dup_bio_out();
1171 #ifndef OPENSSL_NO_SRP
1172 if (!app_passwd(srppass, NULL, &srp_arg.srppassin, NULL)) {
1173 BIO_printf(bio_err, "Error getting password\n");
1178 ctx = SSL_CTX_new(meth);
1180 ERR_print_errors(bio_err);
1185 ssl_ctx_security_debug(ctx, sdebug);
1187 if (vpmtouched && !SSL_CTX_set1_param(ctx, vpm)) {
1188 BIO_printf(bio_err, "Error setting verify params\n");
1189 ERR_print_errors(bio_err);
1193 if (!config_ctx(cctx, ssl_args, ctx, 1, jpake_secret == NULL))
1196 if (!ssl_load_stores(ctx, vfyCApath, vfyCAfile, chCApath, chCAfile,
1197 crls, crl_download)) {
1198 BIO_printf(bio_err, "Error loading store locations\n");
1199 ERR_print_errors(bio_err);
1202 #ifndef OPENSSL_NO_ENGINE
1203 if (ssl_client_engine) {
1204 if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine)) {
1205 BIO_puts(bio_err, "Error setting client auth engine\n");
1206 ERR_print_errors(bio_err);
1207 ENGINE_free(ssl_client_engine);
1210 ENGINE_free(ssl_client_engine);
1214 #ifndef OPENSSL_NO_PSK
1215 if (psk_key != NULL || jpake_secret) {
1217 BIO_printf(bio_c_out,
1218 "PSK key given or JPAKE in use, setting client callback\n");
1219 SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
1222 #ifndef OPENSSL_NO_SRTP
1223 if (srtp_profiles != NULL) {
1224 /* Returns 0 on success! */
1225 if (SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles) != 0) {
1226 BIO_printf(bio_err, "Error setting SRTP profile\n");
1227 ERR_print_errors(bio_err);
1234 ssl_ctx_set_excert(ctx, exc);
1236 #if !defined(OPENSSL_NO_TLSEXT)
1237 # if !defined(OPENSSL_NO_NEXTPROTONEG)
1238 if (next_proto.data)
1239 SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto);
1242 unsigned short alpn_len;
1243 unsigned char *alpn = next_protos_parse(&alpn_len, alpn_in);
1246 BIO_printf(bio_err, "Error parsing -alpn argument\n");
1249 /* Returns 0 on success! */
1250 if (SSL_CTX_set_alpn_protos(ctx, alpn, alpn_len) != 0) {
1251 BIO_printf(bio_err, "Error setting ALPN\n");
1257 #ifndef OPENSSL_NO_TLSEXT
1258 for (i = 0; i < serverinfo_count; i++) {
1259 if (!SSL_CTX_add_client_custom_ext(ctx,
1260 serverinfo_types[i],
1262 serverinfo_cli_parse_cb, NULL)) {
1264 "Warning: Unable to add custom extension %u, skipping\n",
1265 serverinfo_types[i]);
1271 SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback);
1273 SSL_CTX_set_verify(ctx, verify, verify_callback);
1275 if (!ctx_set_verify_locations(ctx, CAfile, CApath)) {
1276 ERR_print_errors(bio_err);
1280 ssl_ctx_add_crls(ctx, crls, crl_download);
1282 if (!set_cert_key_stuff(ctx, cert, key, chain, build_chain))
1285 #ifndef OPENSSL_NO_TLSEXT
1286 if (servername != NULL) {
1287 tlsextcbp.biodebug = bio_err;
1288 SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
1289 SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
1291 # ifndef OPENSSL_NO_SRP
1292 if (srp_arg.srplogin) {
1293 if (!srp_lateuser && !SSL_CTX_set_srp_username(ctx, srp_arg.srplogin)) {
1294 BIO_printf(bio_err, "Unable to set SRP username\n");
1297 srp_arg.msg = c_msg;
1298 srp_arg.debug = c_debug;
1299 SSL_CTX_set_srp_cb_arg(ctx, &srp_arg);
1300 SSL_CTX_set_srp_client_pwd_callback(ctx, ssl_give_srp_client_pwd_cb);
1301 SSL_CTX_set_srp_strength(ctx, srp_arg.strength);
1302 if (c_msg || c_debug || srp_arg.amp == 0)
1303 SSL_CTX_set_srp_verify_param_callback(ctx,
1304 ssl_srp_verify_param_cb);
1312 BIO *stmp = BIO_new_file(sess_in, "r");
1314 BIO_printf(bio_err, "Can't open session file %s\n", sess_in);
1315 ERR_print_errors(bio_err);
1318 sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
1321 BIO_printf(bio_err, "Can't open session file %s\n", sess_in);
1322 ERR_print_errors(bio_err);
1325 if (!SSL_set_session(con, sess)) {
1326 BIO_printf(bio_err, "Can't set session\n");
1327 ERR_print_errors(bio_err);
1330 SSL_SESSION_free(sess);
1334 SSL_set_mode(con, SSL_MODE_SEND_FALLBACK_SCSV);
1336 #ifndef OPENSSL_NO_TLSEXT
1337 if (servername != NULL) {
1338 if (!SSL_set_tlsext_host_name(con, servername)) {
1339 BIO_printf(bio_err, "Unable to set TLS servername extension.\n");
1340 ERR_print_errors(bio_err);
1348 if (init_client(&s, host, port, socket_type) == 0)
1350 if ((!unix_path && (init_client(&s, host, port, socket_type) == 0)) ||
1351 (unix_path && (init_client_unix(&s, unix_path) == 0)))
1354 BIO_printf(bio_err, "connect:errno=%d\n", get_last_socket_error());
1358 BIO_printf(bio_c_out, "CONNECTED(%08X)\n", s);
1362 unsigned long l = 1;
1363 BIO_printf(bio_c_out, "turning on non blocking io\n");
1364 if (BIO_socket_ioctl(s, FIONBIO, &l) < 0) {
1365 ERR_print_errors(bio_err);
1371 SSL_set_debug(con, 1);
1373 if (socket_type == SOCK_DGRAM) {
1375 sbio = BIO_new_dgram(s, BIO_NOCLOSE);
1376 if (getsockname(s, &peer, (void *)&peerlen) < 0) {
1377 BIO_printf(bio_err, "getsockname:errno=%d\n",
1378 get_last_socket_error());
1383 (void)BIO_ctrl_set_connected(sbio, 1, &peer);
1385 if (enable_timeouts) {
1387 timeout.tv_usec = DGRAM_RCV_TIMEOUT;
1388 BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
1391 timeout.tv_usec = DGRAM_SND_TIMEOUT;
1392 BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
1396 if (socket_mtu < DTLS_get_link_min_mtu(con)) {
1397 BIO_printf(bio_err, "MTU too small. Must be at least %ld\n",
1398 DTLS_get_link_min_mtu(con));
1402 SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
1403 if (!DTLS_set_link_mtu(con, socket_mtu)) {
1404 BIO_printf(bio_err, "Failed to set MTU\n");
1409 /* want to do MTU discovery */
1410 BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
1412 sbio = BIO_new_socket(s, BIO_NOCLOSE);
1417 test = BIO_new(BIO_f_nbio_test());
1418 sbio = BIO_push(test, sbio);
1422 SSL_set_debug(con, 1);
1423 BIO_set_callback(sbio, bio_dump_callback);
1424 BIO_set_callback_arg(sbio, (char *)bio_c_out);
1427 #ifndef OPENSSL_NO_SSL_TRACE
1429 SSL_set_msg_callback(con, SSL_trace);
1432 SSL_set_msg_callback(con, msg_cb);
1433 SSL_set_msg_callback_arg(con, bio_c_msg ? bio_c_msg : bio_c_out);
1435 #ifndef OPENSSL_NO_TLSEXT
1436 if (c_tlsextdebug) {
1437 SSL_set_tlsext_debug_callback(con, tlsext_cb);
1438 SSL_set_tlsext_debug_arg(con, bio_c_out);
1441 SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
1442 SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
1443 SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
1446 #ifndef OPENSSL_NO_JPAKE
1448 jpake_client_auth(bio_c_out, sbio, jpake_secret);
1451 SSL_set_bio(con, sbio, sbio);
1452 SSL_set_connect_state(con);
1454 /* ok, lets connect */
1455 width = SSL_get_fd(con) + 1;
1468 switch ((PROTOCOL_CHOICE) starttls_proto) {
1474 * This is an ugly hack that does a lot of assumptions. We do
1475 * have to handle multi-line responses which may come in a single
1476 * packet or not. We therefore have to use BIO_gets() which does
1477 * need a buffering BIO. So during the initial chitchat we do
1478 * push a buffering BIO into the chain that is removed again
1479 * later on to not disturb the rest of the s_client operation.
1482 BIO *fbio = BIO_new(BIO_f_buffer());
1483 BIO_push(fbio, sbio);
1484 /* wait for multi-line response to end from SMTP */
1486 mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
1488 while (mbuf_len > 3 && mbuf[3] == '-');
1489 BIO_printf(fbio, "EHLO %s\r\n", ehlo);
1490 (void)BIO_flush(fbio);
1491 /* wait for multi-line response to end EHLO SMTP response */
1493 mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
1494 if (strstr(mbuf, "STARTTLS"))
1497 while (mbuf_len > 3 && mbuf[3] == '-');
1498 (void)BIO_flush(fbio);
1503 "didn't found starttls in server response,"
1504 " try anyway...\n");
1505 BIO_printf(sbio, "STARTTLS\r\n");
1506 BIO_read(sbio, sbuf, BUFSIZZ);
1511 BIO_read(sbio, mbuf, BUFSIZZ);
1512 BIO_printf(sbio, "STLS\r\n");
1513 mbuf_len = BIO_read(sbio, sbuf, BUFSIZZ);
1515 BIO_printf(bio_err, "BIO_read failed\n");
1523 BIO *fbio = BIO_new(BIO_f_buffer());
1524 BIO_push(fbio, sbio);
1525 BIO_gets(fbio, mbuf, BUFSIZZ);
1526 /* STARTTLS command requires CAPABILITY... */
1527 BIO_printf(fbio, ". CAPABILITY\r\n");
1528 (void)BIO_flush(fbio);
1529 /* wait for multi-line CAPABILITY response */
1531 mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
1532 if (strstr(mbuf, "STARTTLS"))
1535 while (mbuf_len > 3 && mbuf[0] != '.');
1536 (void)BIO_flush(fbio);
1541 "didn't found STARTTLS in server response,"
1542 " try anyway...\n");
1543 BIO_printf(sbio, ". STARTTLS\r\n");
1544 BIO_read(sbio, sbuf, BUFSIZZ);
1549 BIO *fbio = BIO_new(BIO_f_buffer());
1550 BIO_push(fbio, sbio);
1551 /* wait for multi-line response to end from FTP */
1553 mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
1555 while (mbuf_len > 3 && mbuf[3] == '-');
1556 (void)BIO_flush(fbio);
1559 BIO_printf(sbio, "AUTH TLS\r\n");
1560 BIO_read(sbio, sbuf, BUFSIZZ);
1566 BIO_printf(sbio, "<stream:stream "
1567 "xmlns:stream='http://etherx.jabber.org/streams' "
1568 "xmlns='jabber:client' to='%s' version='1.0'>",
1569 xmpphost ? xmpphost : host);
1570 seen = BIO_read(sbio, mbuf, BUFSIZZ);
1573 (mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'")
1575 "<starttls xmlns=\"urn:ietf:params:xml:ns:xmpp-tls\""))
1577 seen = BIO_read(sbio, mbuf, BUFSIZZ);
1585 "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
1586 seen = BIO_read(sbio, sbuf, BUFSIZZ);
1588 if (!strstr(sbuf, "<proceed"))
1595 static const unsigned char tls_do[] = {
1596 /* IAC DO START_TLS */
1599 static const unsigned char tls_will[] = {
1600 /* IAC WILL START_TLS */
1603 static const unsigned char tls_follows[] = {
1604 /* IAC SB START_TLS FOLLOWS IAC SE */
1605 255, 250, 46, 1, 255, 240
1609 /* Telnet server should demand we issue START_TLS */
1610 bytes = BIO_read(sbio, mbuf, BUFSIZZ);
1611 if (bytes != 3 || memcmp(mbuf, tls_do, 3) != 0)
1613 /* Agree to issue START_TLS and send the FOLLOWS sub-command */
1614 BIO_write(sbio, tls_will, 3);
1615 BIO_write(sbio, tls_follows, 6);
1616 (void)BIO_flush(sbio);
1617 /* Telnet server also sent the FOLLOWS sub-command */
1618 bytes = BIO_read(sbio, mbuf, BUFSIZZ);
1619 if (bytes != 6 || memcmp(mbuf, tls_follows, 6) != 0)
1628 if ((SSL_version(con) == DTLS1_VERSION) &&
1629 DTLSv1_get_timeout(con, &timeout))
1630 timeoutp = &timeout;
1634 if (SSL_in_init(con) && !SSL_total_renegotiations(con)) {
1641 #ifndef OPENSSL_NO_TLSEXT
1642 if (servername != NULL && !SSL_session_reused(con)) {
1643 BIO_printf(bio_c_out,
1644 "Server did %sacknowledge servername extension.\n",
1645 tlsextcbp.ack ? "" : "not ");
1649 BIO *stmp = BIO_new_file(sess_out, "w");
1651 PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
1654 BIO_printf(bio_err, "Error writing session file %s\n",
1658 BIO_puts(bio_err, "CONNECTION ESTABLISHED\n");
1659 print_ssl_summary(con);
1662 print_stuff(bio_c_out, con, full_log);
1666 if (starttls_proto) {
1667 BIO_write(bio_err, mbuf, mbuf_len);
1668 /* We don't need to know any more */
1670 starttls_proto = PROTO_OFF;
1675 BIO_printf(bio_c_out,
1676 "drop connection and then reconnect\n");
1678 SSL_set_connect_state(con);
1679 SHUTDOWN(SSL_get_fd(con));
1685 ssl_pending = read_ssl && SSL_pending(con);
1688 #if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
1691 openssl_fdset(fileno(stdin), &readfds);
1693 openssl_fdset(fileno(stdout), &writefds);
1696 openssl_fdset(SSL_get_fd(con), &readfds);
1698 openssl_fdset(SSL_get_fd(con), &writefds);
1700 if (!tty_on || !write_tty) {
1702 openssl_fdset(SSL_get_fd(con), &readfds);
1704 openssl_fdset(SSL_get_fd(con), &writefds);
1709 * Note: under VMS with SOCKETSHR the second parameter is
1710 * currently of type (int *) whereas under other systems it is
1711 * (void *) if you don't have a cast it will choke the compiler:
1712 * if you do have a cast then you can either go for (int *) or
1715 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
1717 * Under Windows/DOS we make the assumption that we can always
1718 * write to the tty: therefore if we need to write to the tty we
1719 * just fall through. Otherwise we timeout the select every
1720 * second and see if there are any keypresses. Note: this is a
1721 * hack, in a proper Windows application we wouldn't do this.
1728 i = select(width, (void *)&readfds, (void *)&writefds,
1730 # if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
1731 if (!i && (!_kbhit() || !read_tty))
1734 if (!i && (!((_kbhit())
1735 || (WAIT_OBJECT_0 ==
1736 WaitForSingleObject(GetStdHandle
1743 i = select(width, (void *)&readfds, (void *)&writefds,
1746 #elif defined(OPENSSL_SYS_NETWARE)
1751 i = select(width, (void *)&readfds, (void *)&writefds,
1754 i = select(width, (void *)&readfds, (void *)&writefds,
1758 i = select(width, (void *)&readfds, (void *)&writefds,
1762 BIO_printf(bio_err, "bad select %d\n",
1763 get_last_socket_error());
1769 if ((SSL_version(con) == DTLS1_VERSION)
1770 && DTLSv1_handle_timeout(con) > 0) {
1771 BIO_printf(bio_err, "TIMEOUT occurred\n");
1774 if (!ssl_pending && FD_ISSET(SSL_get_fd(con), &writefds)) {
1775 k = SSL_write(con, &(cbuf[cbuf_off]), (unsigned int)cbuf_len);
1776 switch (SSL_get_error(con, k)) {
1777 case SSL_ERROR_NONE:
1782 /* we have done a write(con,NULL,0); */
1783 if (cbuf_len <= 0) {
1786 } else { /* if (cbuf_len > 0) */
1792 case SSL_ERROR_WANT_WRITE:
1793 BIO_printf(bio_c_out, "write W BLOCK\n");
1797 case SSL_ERROR_WANT_READ:
1798 BIO_printf(bio_c_out, "write R BLOCK\n");
1803 case SSL_ERROR_WANT_X509_LOOKUP:
1804 BIO_printf(bio_c_out, "write X BLOCK\n");
1806 case SSL_ERROR_ZERO_RETURN:
1807 if (cbuf_len != 0) {
1808 BIO_printf(bio_c_out, "shutdown\n");
1817 case SSL_ERROR_SYSCALL:
1818 if ((k != 0) || (cbuf_len != 0)) {
1819 BIO_printf(bio_err, "write:errno=%d\n",
1820 get_last_socket_error());
1828 ERR_print_errors(bio_err);
1832 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
1833 /* Assume Windows/DOS/BeOS can always write */
1834 else if (!ssl_pending && write_tty)
1836 else if (!ssl_pending && FD_ISSET(fileno(stdout), &writefds))
1839 #ifdef CHARSET_EBCDIC
1840 ascii2ebcdic(&(sbuf[sbuf_off]), &(sbuf[sbuf_off]), sbuf_len);
1842 i = raw_write_stdout(&(sbuf[sbuf_off]), sbuf_len);
1845 BIO_printf(bio_c_out, "DONE\n");
1853 if (sbuf_len <= 0) {
1857 } else if (ssl_pending || FD_ISSET(SSL_get_fd(con), &readfds)) {
1862 SSL_renegotiate(con);
1867 k = SSL_read(con, sbuf, 1024 /* BUFSIZZ */ );
1869 switch (SSL_get_error(con, k)) {
1870 case SSL_ERROR_NONE:
1879 case SSL_ERROR_WANT_WRITE:
1880 BIO_printf(bio_c_out, "read W BLOCK\n");
1884 case SSL_ERROR_WANT_READ:
1885 BIO_printf(bio_c_out, "read R BLOCK\n");
1888 if ((read_tty == 0) && (write_ssl == 0))
1891 case SSL_ERROR_WANT_X509_LOOKUP:
1892 BIO_printf(bio_c_out, "read X BLOCK\n");
1894 case SSL_ERROR_SYSCALL:
1895 ret = get_last_socket_error();
1897 BIO_puts(bio_err, "CONNECTION CLOSED BY SERVER\n");
1899 BIO_printf(bio_err, "read:errno=%d\n", ret);
1901 case SSL_ERROR_ZERO_RETURN:
1902 BIO_printf(bio_c_out, "closed\n");
1906 ERR_print_errors(bio_err);
1911 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
1912 # if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
1916 || (WAIT_OBJECT_0 ==
1917 WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
1919 #elif defined (OPENSSL_SYS_NETWARE)
1922 else if (FD_ISSET(fileno(stdin), &readfds))
1928 i = raw_read_stdin(cbuf, BUFSIZZ / 2);
1930 /* both loops are skipped when i <= 0 */
1931 for (j = 0; j < i; j++)
1932 if (cbuf[j] == '\n')
1934 for (j = i - 1; j >= 0; j--) {
1935 cbuf[j + lf_num] = cbuf[j];
1936 if (cbuf[j] == '\n') {
1939 cbuf[j + lf_num] = '\r';
1942 assert(lf_num == 0);
1944 i = raw_read_stdin(cbuf, BUFSIZZ);
1946 if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q' && cmdletters))) {
1947 BIO_printf(bio_err, "DONE\n");
1952 if ((!c_ign_eof) && (cbuf[0] == 'R' && cmdletters)) {
1953 BIO_printf(bio_err, "RENEGOTIATING\n");
1954 SSL_renegotiate(con);
1957 #ifndef OPENSSL_NO_HEARTBEATS
1958 else if ((!c_ign_eof) && (cbuf[0] == 'B' && cmdletters)) {
1959 BIO_printf(bio_err, "HEARTBEATING\n");
1967 #ifdef CHARSET_EBCDIC
1968 ebcdic2ascii(cbuf, cbuf, i);
1980 print_stuff(bio_c_out, con, full_log);
1982 SHUTDOWN(SSL_get_fd(con));
1986 print_stuff(bio_c_out, con, 1);
1989 #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
1990 OPENSSL_free(next_proto.data);
1994 sk_X509_CRL_pop_free(crls, X509_CRL_free);
1996 sk_X509_pop_free(chain, X509_free);
1998 X509_VERIFY_PARAM_free(vpm);
1999 ssl_excert_free(exc);
2000 sk_OPENSSL_STRING_free(ssl_args);
2001 SSL_CONF_CTX_free(cctx);
2002 OPENSSL_clear_free(cbuf, BUFSIZZ);
2003 OPENSSL_clear_free(sbuf, BUFSIZZ);
2004 OPENSSL_clear_free(mbuf, BUFSIZZ);
2005 BIO_free(bio_c_out);
2007 BIO_free(bio_c_msg);
2012 static void print_stuff(BIO *bio, SSL *s, int full)
2017 STACK_OF(X509_NAME) *sk2;
2018 const SSL_CIPHER *c;
2021 #ifndef OPENSSL_NO_COMP
2022 const COMP_METHOD *comp, *expansion;
2024 unsigned char *exportedkeymat;
2027 int got_a_chain = 0;
2029 sk = SSL_get_peer_cert_chain(s);
2033 BIO_printf(bio, "---\nCertificate chain\n");
2034 for (i = 0; i < sk_X509_num(sk); i++) {
2035 X509_NAME_oneline(X509_get_subject_name(sk_X509_value(sk, i)),
2037 BIO_printf(bio, "%2d s:%s\n", i, buf);
2038 X509_NAME_oneline(X509_get_issuer_name(sk_X509_value(sk, i)),
2040 BIO_printf(bio, " i:%s\n", buf);
2042 PEM_write_bio_X509(bio, sk_X509_value(sk, i));
2046 BIO_printf(bio, "---\n");
2047 peer = SSL_get_peer_certificate(s);
2049 BIO_printf(bio, "Server certificate\n");
2051 /* Redundant if we showed the whole chain */
2052 if (!(c_showcerts && got_a_chain))
2053 PEM_write_bio_X509(bio, peer);
2054 X509_NAME_oneline(X509_get_subject_name(peer), buf, sizeof buf);
2055 BIO_printf(bio, "subject=%s\n", buf);
2056 X509_NAME_oneline(X509_get_issuer_name(peer), buf, sizeof buf);
2057 BIO_printf(bio, "issuer=%s\n", buf);
2059 BIO_printf(bio, "no peer certificate available\n");
2061 sk2 = SSL_get_client_CA_list(s);
2062 if ((sk2 != NULL) && (sk_X509_NAME_num(sk2) > 0)) {
2063 BIO_printf(bio, "---\nAcceptable client certificate CA names\n");
2064 for (i = 0; i < sk_X509_NAME_num(sk2); i++) {
2065 xn = sk_X509_NAME_value(sk2, i);
2066 X509_NAME_oneline(xn, buf, sizeof(buf));
2067 BIO_write(bio, buf, strlen(buf));
2068 BIO_write(bio, "\n", 1);
2071 BIO_printf(bio, "---\nNo client certificate CA names sent\n");
2074 ssl_print_sigalgs(bio, s);
2075 ssl_print_tmp_key(bio, s);
2078 "---\nSSL handshake has read %ld bytes and written %ld bytes\n",
2079 BIO_number_read(SSL_get_rbio(s)),
2080 BIO_number_written(SSL_get_wbio(s)));
2082 BIO_printf(bio, (SSL_cache_hit(s) ? "---\nReused, " : "---\nNew, "));
2083 c = SSL_get_current_cipher(s);
2084 BIO_printf(bio, "%s, Cipher is %s\n",
2085 SSL_CIPHER_get_version(c), SSL_CIPHER_get_name(c));
2088 pktmp = X509_get_pubkey(peer);
2089 BIO_printf(bio, "Server public key is %d bit\n",
2090 EVP_PKEY_bits(pktmp));
2091 EVP_PKEY_free(pktmp);
2093 BIO_printf(bio, "Secure Renegotiation IS%s supported\n",
2094 SSL_get_secure_renegotiation_support(s) ? "" : " NOT");
2095 #ifndef OPENSSL_NO_COMP
2096 comp = SSL_get_current_compression(s);
2097 expansion = SSL_get_current_expansion(s);
2098 BIO_printf(bio, "Compression: %s\n",
2099 comp ? SSL_COMP_get_name(comp) : "NONE");
2100 BIO_printf(bio, "Expansion: %s\n",
2101 expansion ? SSL_COMP_get_name(expansion) : "NONE");
2106 /* Print out local port of connection: useful for debugging */
2108 struct sockaddr_in ladd;
2109 socklen_t ladd_size = sizeof(ladd);
2110 sock = SSL_get_fd(s);
2111 getsockname(sock, (struct sockaddr *)&ladd, &ladd_size);
2112 BIO_printf(bio_c_out, "LOCAL PORT is %u\n", ntohs(ladd.sin_port));
2116 #if !defined(OPENSSL_NO_TLSEXT)
2117 # if !defined(OPENSSL_NO_NEXTPROTONEG)
2118 if (next_proto.status != -1) {
2119 const unsigned char *proto;
2120 unsigned int proto_len;
2121 SSL_get0_next_proto_negotiated(s, &proto, &proto_len);
2122 BIO_printf(bio, "Next protocol: (%d) ", next_proto.status);
2123 BIO_write(bio, proto, proto_len);
2124 BIO_write(bio, "\n", 1);
2128 const unsigned char *proto;
2129 unsigned int proto_len;
2130 SSL_get0_alpn_selected(s, &proto, &proto_len);
2131 if (proto_len > 0) {
2132 BIO_printf(bio, "ALPN protocol: ");
2133 BIO_write(bio, proto, proto_len);
2134 BIO_write(bio, "\n", 1);
2136 BIO_printf(bio, "No ALPN negotiated\n");
2140 #ifndef OPENSSL_NO_SRTP
2142 SRTP_PROTECTION_PROFILE *srtp_profile =
2143 SSL_get_selected_srtp_profile(s);
2146 BIO_printf(bio, "SRTP Extension negotiated, profile=%s\n",
2147 srtp_profile->name);
2151 SSL_SESSION_print(bio, SSL_get_session(s));
2152 if (keymatexportlabel != NULL) {
2153 BIO_printf(bio, "Keying material exporter:\n");
2154 BIO_printf(bio, " Label: '%s'\n", keymatexportlabel);
2155 BIO_printf(bio, " Length: %i bytes\n", keymatexportlen);
2156 exportedkeymat = app_malloc(keymatexportlen, "export key");
2157 if (!SSL_export_keying_material(s, exportedkeymat,
2160 strlen(keymatexportlabel),
2162 BIO_printf(bio, " Error\n");
2164 BIO_printf(bio, " Keying material: ");
2165 for (i = 0; i < keymatexportlen; i++)
2166 BIO_printf(bio, "%02X", exportedkeymat[i]);
2167 BIO_printf(bio, "\n");
2169 OPENSSL_free(exportedkeymat);
2171 BIO_printf(bio, "---\n");
2173 /* flush, or debugging output gets mixed with http response */
2174 (void)BIO_flush(bio);
2177 #ifndef OPENSSL_NO_TLSEXT
2179 static int ocsp_resp_cb(SSL *s, void *arg)
2181 const unsigned char *p;
2184 len = SSL_get_tlsext_status_ocsp_resp(s, &p);
2185 BIO_puts(arg, "OCSP response: ");
2187 BIO_puts(arg, "no response sent\n");
2190 rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
2192 BIO_puts(arg, "response parse error\n");
2193 BIO_dump_indent(arg, (char *)p, len, 4);
2196 BIO_puts(arg, "\n======================================\n");
2197 OCSP_RESPONSE_print(arg, rsp, 0);
2198 BIO_puts(arg, "======================================\n");
2199 OCSP_RESPONSE_free(rsp);