5 Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
7 *) Fix Use After Free for large message sizes
9 The patch applied to address CVE-2016-6307 resulted in an issue where if a
10 message larger than approx 16k is received then the underlying buffer to
11 store the incoming message is reallocated and moved. Unfortunately a
12 dangling pointer to the old location is left which results in an attempt to
13 write to the previously freed location. This is likely to result in a
14 crash, however it could potentially lead to execution of arbitrary code.
16 This issue only affects OpenSSL 1.1.0a.
18 This issue was reported to OpenSSL by Robert Święcki.
22 Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
24 *) OCSP Status Request extension unbounded memory growth
26 A malicious client can send an excessively large OCSP Status Request
27 extension. If that client continually requests renegotiation, sending a
28 large OCSP Status Request extension each time, then there will be unbounded
29 memory growth on the server. This will eventually lead to a Denial Of
30 Service attack through memory exhaustion. Servers with a default
31 configuration are vulnerable even if they do not support OCSP. Builds using
32 the "no-ocsp" build time option are not affected.
34 This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
38 *) SSL_peek() hang on empty record
40 OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
41 sends an empty record. This could be exploited by a malicious peer in a
42 Denial Of Service attack.
44 This issue was reported to OpenSSL by Alex Gaynor.
48 *) Excessive allocation of memory in tls_get_message_header() and
49 dtls1_preprocess_fragment()
51 A (D)TLS message includes 3 bytes for its length in the header for the
52 message. This would allow for messages up to 16Mb in length. Messages of
53 this length are excessive and OpenSSL includes a check to ensure that a
54 peer is sending reasonably sized messages in order to avoid too much memory
55 being consumed to service a connection. A flaw in the logic of version
56 1.1.0 means that memory for the message is allocated too early, prior to
57 the excessive message length check. Due to way memory is allocated in
58 OpenSSL this could mean an attacker could force up to 21Mb to be allocated
59 to service a connection. This could lead to a Denial of Service through
60 memory exhaustion. However, the excessive message length check still takes
61 place, and this would cause the connection to immediately fail. Assuming
62 that the application calls SSL_free() on the failed conneciton in a timely
63 manner then the 21Mb of allocated memory will then be immediately freed
64 again. Therefore the excessive memory allocation will be transitory in
65 nature. This then means that there is only a security impact if:
67 1) The application does not call SSL_free() in a timely manner in the event
68 that the connection fails
70 2) The application is working in a constrained environment where there is
71 very little free memory
73 3) The attacker initiates multiple connection attempts such that there are
74 multiple connections in a state where memory has been allocated for the
75 connection; SSL_free() has not yet been called; and there is insufficient
76 memory to service the multiple requests.
78 Except in the instance of (1) above any Denial Of Service is likely to be
79 transitory because as soon as the connection fails the memory is
80 subsequently freed again in the SSL_free() call. However there is an
81 increased risk during this period of application crashes due to the lack of
82 memory - which would then mean a more serious Denial of Service.
84 This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
85 (CVE-2016-6307 and CVE-2016-6308)
88 *) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
89 had to be removed. Primary reason is that vendor assembler can't
90 assemble our modules with -KPIC flag. As result it, assembly
91 support, was not even available as option. But its lack means
92 lack of side-channel resistant code, which is incompatible with
93 security by todays standards. Fortunately gcc is readily available
94 prepackaged option, which we firmly point at...
97 Changes between 1.0.2h and 1.1.0 [25 Aug 2016]
99 *) Windows command-line tool supports UTF-8 opt-in option for arguments
100 and console input. Setting OPENSSL_WIN32_UTF8 environment variable
101 (to any value) allows Windows user to access PKCS#12 file generated
102 with Windows CryptoAPI and protected with non-ASCII password, as well
103 as files generated under UTF-8 locale on Linux also protected with
107 *) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
108 have been disabled by default and removed from DEFAULT, just like RC4.
109 See the RC4 item below to re-enable both.
112 *) The method for finding the storage location for the Windows RAND seed file
113 has changed. First we check %RANDFILE%. If that is not set then we check
114 the directories %HOME%, %USERPROFILE% and %SYSTEMROOT% in that order. If
115 all else fails we fall back to C:\.
118 *) The EVP_EncryptUpdate() function has had its return type changed from void
119 to int. A return of 0 indicates and error while a return of 1 indicates
123 *) The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
124 DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
125 off the constant time implementation for RSA, DSA and DH have been made
126 no-ops and deprecated.
129 *) Windows RAND implementation was simplified to only get entropy by
130 calling CryptGenRandom(). Various other RAND-related tickets
132 [Joseph Wylie Yandle, Rich Salz]
134 *) The stack and lhash API's were renamed to start with OPENSSL_SK_
135 and OPENSSL_LH_, respectively. The old names are available
136 with API compatibility. They new names are now completely documented.
139 *) Unify TYPE_up_ref(obj) methods signature.
140 SSL_CTX_up_ref(), SSL_up_ref(), X509_up_ref(), EVP_PKEY_up_ref(),
141 X509_CRL_up_ref(), X509_OBJECT_up_ref_count() methods are now returning an
142 int (instead of void) like all others TYPE_up_ref() methods.
143 So now these methods also check the return value of CRYPTO_atomic_add(),
144 and the validity of object reference counter.
145 [fdasilvayy@gmail.com]
147 *) With Windows Visual Studio builds, the .pdb files are installed
148 alongside the installed libraries and executables. For a static
149 library installation, ossl_static.pdb is the associate compiler
150 generated .pdb file to be used when linking programs.
153 *) Remove openssl.spec. Packaging files belong with the packagers.
156 *) Automatic Darwin/OSX configuration has had a refresh, it will now
157 recognise x86_64 architectures automatically. You can still decide
158 to build for a different bitness with the environment variable
159 KERNEL_BITS (can be 32 or 64), for example:
161 KERNEL_BITS=32 ./config
165 *) Change default algorithms in pkcs8 utility to use PKCS#5 v2.0,
166 256 bit AES and HMAC with SHA256.
169 *) Remove support for MIPS o32 ABI on IRIX (and IRIX only).
172 *) Triple-DES ciphers have been moved from HIGH to MEDIUM.
175 *) To enable users to have their own config files and build file templates,
176 Configure looks in the directory indicated by the environment variable
177 OPENSSL_LOCAL_CONFIG_DIR as well as the in-source Configurations/
178 directory. On VMS, OPENSSL_LOCAL_CONFIG_DIR is expected to be a logical
179 name and is used as is.
182 *) The following datatypes were made opaque: X509_OBJECT, X509_STORE_CTX,
183 X509_STORE, X509_LOOKUP, and X509_LOOKUP_METHOD. The unused type
184 X509_CERT_FILE_CTX was removed.
187 *) "shared" builds are now the default. To create only static libraries use
188 the "no-shared" Configure option.
191 *) Remove the no-aes, no-hmac, no-rsa, no-sha and no-md5 Configure options.
192 All of these option have not worked for some while and are fundamental
196 *) Make various cleanup routines no-ops and mark them as deprecated. Most
197 global cleanup functions are no longer required because they are handled
198 via auto-deinit (see OPENSSL_init_crypto and OPENSSL_init_ssl man pages).
199 Explicitly de-initing can cause problems (e.g. where a library that uses
200 OpenSSL de-inits, but an application is still using it). The affected
201 functions are CONF_modules_free(), ENGINE_cleanup(), OBJ_cleanup(),
202 EVP_cleanup(), BIO_sock_cleanup(), CRYPTO_cleanup_all_ex_data(),
203 RAND_cleanup(), SSL_COMP_free_compression_methods(), ERR_free_strings() and
207 *) --strict-warnings no longer enables runtime debugging options
208 such as REF_DEBUG. Instead, debug options are automatically
209 enabled with '--debug' builds.
210 [Andy Polyakov, Emilia Käsper]
212 *) Made DH and DH_METHOD opaque. The structures for managing DH objects
213 have been moved out of the public header files. New functions for managing
214 these have been added.
217 *) Made RSA and RSA_METHOD opaque. The structures for managing RSA
218 objects have been moved out of the public header files. New
219 functions for managing these have been added.
222 *) Made DSA and DSA_METHOD opaque. The structures for managing DSA objects
223 have been moved out of the public header files. New functions for managing
224 these have been added.
227 *) Made BIO and BIO_METHOD opaque. The structures for managing BIOs have been
228 moved out of the public header files. New functions for managing these
232 *) Removed no-rijndael as a config option. Rijndael is an old name for AES.
235 *) Removed the mk1mf build scripts.
238 *) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
239 it is always safe to #include a header now.
242 *) Removed the aged BC-32 config and all its supporting scripts
245 *) Removed support for Ultrix, Netware, and OS/2.
248 *) Add support for HKDF.
251 *) Add support for blake2b and blake2s
254 *) Added support for "pipelining". Ciphers that have the
255 EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
256 encryptions/decryptions simultaneously. There are currently no built-in
257 ciphers with this property but the expectation is that engines will be able
258 to offer it to significantly improve throughput. Support has been extended
259 into libssl so that multiple records for a single connection can be
260 processed in one go (for >=TLS 1.1).
263 *) Added the AFALG engine. This is an async capable engine which is able to
264 offload work to the Linux kernel. In this initial version it only supports
265 AES128-CBC. The kernel must be version 4.1.0 or greater.
268 *) OpenSSL now uses a new threading API. It is no longer necessary to
269 set locking callbacks to use OpenSSL in a multi-threaded environment. There
270 are two supported threading models: pthreads and windows threads. It is
271 also possible to configure OpenSSL at compile time for "no-threads". The
272 old threading API should no longer be used. The functions have been
273 replaced with "no-op" compatibility macros.
274 [Alessandro Ghedini, Matt Caswell]
276 *) Modify behavior of ALPN to invoke callback after SNI/servername
277 callback, such that updates to the SSL_CTX affect ALPN.
280 *) Add SSL_CIPHER queries for authentication and key-exchange.
283 *) Changes to the DEFAULT cipherlist:
284 - Prefer (EC)DHE handshakes over plain RSA.
285 - Prefer AEAD ciphers over legacy ciphers.
286 - Prefer ECDSA over RSA when both certificates are available.
287 - Prefer TLSv1.2 ciphers/PRF.
288 - Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
292 *) Change the ECC default curve list to be this, in order: x25519,
293 secp256r1, secp521r1, secp384r1.
296 *) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
297 disabled by default. They can be re-enabled using the
298 enable-weak-ssl-ciphers option to Configure.
301 *) If the server has ALPN configured, but supports no protocols that the
302 client advertises, send a fatal "no_application_protocol" alert.
303 This behaviour is SHALL in RFC 7301, though it isn't universally
304 implemented by other servers.
307 *) Add X25519 support.
308 Add ASN.1 and EVP_PKEY methods for X25519. This includes support
309 for public and private key encoding using the format documented in
310 draft-ietf-curdle-pkix-02. The coresponding EVP_PKEY method supports
311 key generation and key derivation.
313 TLS support complies with draft-ietf-tls-rfc4492bis-08 and uses
317 *) Deprecate SRP_VBASE_get_by_user.
318 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
319 In order to fix an unavoidable memory leak (CVE-2016-0798),
320 SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
321 seed, even if the seed is configured.
323 Users should use SRP_VBASE_get1_by_user instead. Note that in
324 SRP_VBASE_get1_by_user, caller must free the returned value. Note
325 also that even though configuring the SRP seed attempts to hide
326 invalid usernames by continuing the handshake with fake
327 credentials, this behaviour is not constant time and no strong
328 guarantees are made that the handshake is indistinguishable from
329 that of a valid user.
332 *) Configuration change; it's now possible to build dynamic engines
333 without having to build shared libraries and vice versa. This
334 only applies to the engines in engines/, those in crypto/engine/
335 will always be built into libcrypto (i.e. "static").
337 Building dynamic engines is enabled by default; to disable, use
338 the configuration option "disable-dynamic-engine".
340 The only requirements for building dynamic engines are the
341 presence of the DSO module and building with position independent
342 code, so they will also automatically be disabled if configuring
343 with "disable-dso" or "disable-pic".
345 The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
346 are also taken away from openssl/opensslconf.h, as they are
350 *) Configuration change; if there is a known flag to compile
351 position independent code, it will always be applied on the
352 libcrypto and libssl object files, and never on the application
353 object files. This means other libraries that use routines from
354 libcrypto / libssl can be made into shared libraries regardless
355 of how OpenSSL was configured.
357 If this isn't desirable, the configuration options "disable-pic"
358 or "no-pic" can be used to disable the use of PIC. This will
359 also disable building shared libraries and dynamic engines.
362 *) Removed JPAKE code. It was experimental and has no wide use.
365 *) The INSTALL_PREFIX Makefile variable has been renamed to
366 DESTDIR. That makes for less confusion on what this variable
367 is for. Also, the configuration option --install_prefix is
371 *) Heartbeat for TLS has been removed and is disabled by default
372 for DTLS; configure with enable-heartbeats. Code that uses the
373 old #define's might need to be updated.
374 [Emilia Käsper, Rich Salz]
376 *) Rename REF_CHECK to REF_DEBUG.
379 *) New "unified" build system
381 The "unified" build system is aimed to be a common system for all
382 platforms we support. With it comes new support for VMS.
384 This system builds supports building in a different directory tree
385 than the source tree. It produces one Makefile (for unix family
386 or lookalikes), or one descrip.mms (for VMS).
388 The source of information to make the Makefile / descrip.mms is
389 small files called 'build.info', holding the necessary
390 information for each directory with source to compile, and a
391 template in Configurations, like unix-Makefile.tmpl or
394 We rely heavily on the perl module Text::Template.
397 *) Added support for auto-initialisation and de-initialisation of the library.
398 OpenSSL no longer requires explicit init or deinit routines to be called,
399 except in certain circumstances. See the OPENSSL_init_crypto() and
400 OPENSSL_init_ssl() man pages for further information.
403 *) The arguments to the DTLSv1_listen function have changed. Specifically the
404 "peer" argument is now expected to be a BIO_ADDR object.
406 *) Rewrite of BIO networking library. The BIO library lacked consistent
407 support of IPv6, and adding it required some more extensive
408 modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
409 which hold all types of addresses and chains of address information.
410 It also introduces a new API, with functions like BIO_socket,
411 BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
412 The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
413 have been adapted accordingly.
416 *) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
420 *) CRIME protection: disable compression by default, even if OpenSSL is
421 compiled with zlib enabled. Applications can still enable compression
422 by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
423 using the SSL_CONF library to configure compression.
426 *) The signature of the session callback configured with
427 SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
428 was explicitly marked as 'const unsigned char*' instead of
432 *) Always DPURIFY. Remove the use of uninitialized memory in the
433 RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
436 *) Removed many obsolete configuration items, including
437 DES_PTR, DES_RISC1, DES_RISC2, DES_INT
438 MD2_CHAR, MD2_INT, MD2_LONG
440 IDEA_SHORT, IDEA_LONG
441 RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
442 [Rich Salz, with advice from Andy Polyakov]
444 *) Many BN internals have been moved to an internal header file.
445 [Rich Salz with help from Andy Polyakov]
447 *) Configuration and writing out the results from it has changed.
448 Files such as Makefile include/openssl/opensslconf.h and are now
449 produced through general templates, such as Makefile.in and
450 crypto/opensslconf.h.in and some help from the perl module
453 Also, the center of configuration information is no longer
454 Makefile. Instead, Configure produces a perl module in
455 configdata.pm which holds most of the config data (in the hash
456 table %config), the target data that comes from the target
457 configuration in one of the Configurations/*.conf files (in
461 *) To clarify their intended purposes, the Configure options
462 --prefix and --openssldir change their semantics, and become more
463 straightforward and less interdependent.
465 --prefix shall be used exclusively to give the location INSTALLTOP
466 where programs, scripts, libraries, include files and manuals are
467 going to be installed. The default is now /usr/local.
469 --openssldir shall be used exclusively to give the default
470 location OPENSSLDIR where certificates, private keys, CRLs are
471 managed. This is also where the default openssl.cnf gets
473 If the directory given with this option is a relative path, the
474 values of both the --prefix value and the --openssldir value will
475 be combined to become OPENSSLDIR.
476 The default for --openssldir is INSTALLTOP/ssl.
478 Anyone who uses --openssldir to specify where OpenSSL is to be
479 installed MUST change to use --prefix instead.
482 *) The GOST engine was out of date and therefore it has been removed. An up
483 to date GOST engine is now being maintained in an external repository.
484 See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
485 support for GOST ciphersuites (these are only activated if a GOST engine
489 *) EGD is no longer supported by default; use enable-egd when
491 [Ben Kaduk and Rich Salz]
493 *) The distribution now has Makefile.in files, which are used to
494 create Makefile's when Configure is run. *Configure must be run
495 before trying to build now.*
498 *) The return value for SSL_CIPHER_description() for error conditions
502 *) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
504 Obtaining and performing DNSSEC validation of TLSA records is
505 the application's responsibility. The application provides
506 the TLSA records of its choice to OpenSSL, and these are then
507 used to authenticate the peer.
509 The TLSA records need not even come from DNS. They can, for
510 example, be used to implement local end-entity certificate or
511 trust-anchor "pinning", where the "pin" data takes the form
512 of TLSA records, which can augment or replace verification
513 based on the usual WebPKI public certification authorities.
516 *) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
517 continues to support deprecated interfaces in default builds.
518 However, applications are strongly advised to compile their
519 source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
520 the declarations of all interfaces deprecated in 0.9.8, 1.0.0
521 or the 1.1.0 releases.
523 In environments in which all applications have been ported to
524 not use any deprecated interfaces OpenSSL's Configure script
525 should be used with the --api=1.1.0 option to entirely remove
526 support for the deprecated features from the library and
527 unconditionally disable them in the installed headers.
528 Essentially the same effect can be achieved with the "no-deprecated"
529 argument to Configure, except that this will always restrict
530 the build to just the latest API, rather than a fixed API
533 As applications are ported to future revisions of the API,
534 they should update their compile-time OPENSSL_API_COMPAT define
535 accordingly, but in most cases should be able to continue to
536 compile with later releases.
538 The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
539 0x10000000L and 0x00908000L, respectively. However those
540 versions did not support the OPENSSL_API_COMPAT feature, and
541 so applications are not typically tested for explicit support
542 of just the undeprecated features of either release.
545 *) Add support for setting the minimum and maximum supported protocol.
546 It can bet set via the SSL_set_min_proto_version() and
547 SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
548 MaxProtcol. It's recommended to use the new APIs to disable
549 protocols instead of disabling individual protocols using
550 SSL_set_options() or SSL_CONF's Protocol. This change also
551 removes support for disabling TLS 1.2 in the OpenSSL TLS
552 client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
555 *) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
558 *) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
559 and integrates ECDSA and ECDH functionality into EC. Implementations can
560 now redirect key generation and no longer need to convert to or from
563 Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
564 include the ec.h header file instead.
567 *) Remove support for all 40 and 56 bit ciphers. This includes all the export
568 ciphers who are no longer supported and drops support the ephemeral RSA key
569 exchange. The LOW ciphers currently doesn't have any ciphers in it.
572 *) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
573 opaque. For HMAC_CTX, the following constructors and destructors
576 HMAC_CTX *HMAC_CTX_new(void);
577 void HMAC_CTX_free(HMAC_CTX *ctx);
579 For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
580 destroy such methods has been added. See EVP_MD_meth_new(3) and
581 EVP_CIPHER_meth_new(3) for documentation.
584 1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
585 HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
586 EVP_MD_CTX_reset() should be called instead to reinitialise
587 an already created structure.
588 2) For consistency with the majority of our object creators and
589 destructors, EVP_MD_CTX_(create|destroy) were renamed to
590 EVP_MD_CTX_(new|free). The old names are retained as macros
591 for deprecated builds.
594 *) Added ASYNC support. Libcrypto now includes the async sub-library to enable
595 cryptographic operations to be performed asynchronously as long as an
596 asynchronous capable engine is used. See the ASYNC_start_job() man page for
597 further details. Libssl has also had this capability integrated with the
598 introduction of the new mode SSL_MODE_ASYNC and associated error
599 SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
600 pages. This work was developed in partnership with Intel Corp.
603 *) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
604 always enabled now. If you want to disable the support you should
605 exclude it using the list of supported ciphers. This also means that the
606 "-no_ecdhe" option has been removed from s_server.
609 *) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
610 SSL_{CTX_}set1_curves() which can set a list.
613 *) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
614 curve you want to support using SSL_{CTX_}set1_curves().
617 *) State machine rewrite. The state machine code has been significantly
618 refactored in order to remove much duplication of code and solve issues
619 with the old code (see ssl/statem/README for further details). This change
620 does have some associated API changes. Notably the SSL_state() function
621 has been removed and replaced by SSL_get_state which now returns an
622 "OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
623 altogether. The previous handshake states defined in ssl.h and ssl3.h have
627 *) All instances of the string "ssleay" in the public API were replaced
628 with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
629 Some error codes related to internal RSA_eay API's were renamed.
632 *) The demo files in crypto/threads were moved to demo/threads.
635 *) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
637 [Matt Caswell, Rich Salz]
639 *) New ASN.1 embed macro.
641 New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
642 structure is not allocated: it is part of the parent. That is instead of
650 This reduces memory fragmentation and make it impossible to accidentally
651 set a mandatory field to NULL.
653 This currently only works for some fields specifically a SEQUENCE, CHOICE,
654 or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
655 equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
659 *) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
662 *) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
663 in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
664 an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
665 DES and RC4 ciphersuites.
668 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
669 This changes the decoding behaviour for some invalid messages,
670 though the change is mostly in the more lenient direction, and
671 legacy behaviour is preserved as much as possible.
674 *) Fix no-stdio build.
675 [ David Woodhouse <David.Woodhouse@intel.com> and also
676 Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
678 *) New testing framework
679 The testing framework has been largely rewritten and is now using
680 perl and the perl modules Test::Harness and an extended variant of
681 Test::More called OpenSSL::Test to do its work. All test scripts in
682 test/ have been rewritten into test recipes, and all direct calls to
683 executables in test/Makefile have become individual recipes using the
684 simplified testing OpenSSL::Test::Simple.
686 For documentation on our testing modules, do:
688 perldoc test/testlib/OpenSSL/Test/Simple.pm
689 perldoc test/testlib/OpenSSL/Test.pm
693 *) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
694 are used; the latter aborts on memory leaks (usually checked on exit).
695 Some undocumented "set malloc, etc., hooks" functions were removed
696 and others were changed. All are now documented.
699 *) In DSA_generate_parameters_ex, if the provided seed is too short,
701 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
703 *) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
704 from RFC4279, RFC4785, RFC5487, RFC5489.
706 Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
707 original RSA_PSK patch.
710 *) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
711 era flag was never set throughout the codebase (only read). Also removed
712 SSL3_FLAGS_POP_BUFFER which was only used if
713 SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
716 *) Changed the default name options in the "ca", "crl", "req" and "x509"
717 to be "oneline" instead of "compat".
720 *) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
721 not aware of clients that still exhibit this bug, and the workaround
722 hasn't been working properly for a while.
725 *) The return type of BIO_number_read() and BIO_number_written() as well as
726 the corresponding num_read and num_write members in the BIO structure has
727 changed from unsigned long to uint64_t. On platforms where an unsigned
728 long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
732 *) Given the pervasive nature of TLS extensions it is inadvisable to run
733 OpenSSL without support for them. It also means that maintaining
734 the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
735 not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
738 *) Removed support for the two export grade static DH ciphersuites
739 EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
740 were newly added (along with a number of other static DH ciphersuites) to
741 1.0.2. However the two export ones have *never* worked since they were
742 introduced. It seems strange in any case to be adding new export
743 ciphersuites, and given "logjam" it also does not seem correct to fix them.
746 *) Version negotiation has been rewritten. In particular SSLv23_method(),
747 SSLv23_client_method() and SSLv23_server_method() have been deprecated,
748 and turned into macros which simply call the new preferred function names
749 TLS_method(), TLS_client_method() and TLS_server_method(). All new code
750 should use the new names instead. Also as part of this change the ssl23.h
751 header file has been removed.
754 *) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
755 code and the associated standard is no longer considered fit-for-purpose.
758 *) RT2547 was closed. When generating a private key, try to make the
759 output file readable only by the owner. This behavior change might
760 be noticeable when interacting with other software.
762 *) Documented all exdata functions. Added CRYPTO_free_ex_index.
766 *) Added HTTP GET support to the ocsp command.
769 *) Changed default digest for the dgst and enc commands from MD5 to
773 *) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
776 *) Added support for TLS extended master secret from
777 draft-ietf-tls-session-hash-03.txt. Thanks for Alfredo Pironti for an
778 initial patch which was a great help during development.
781 *) All libssl internal structures have been removed from the public header
782 files, and the OPENSSL_NO_SSL_INTERN option has been removed (since it is
783 now redundant). Users should not attempt to access internal structures
784 directly. Instead they should use the provided API functions.
787 *) config has been changed so that by default OPENSSL_NO_DEPRECATED is used.
788 Access to deprecated functions can be re-enabled by running config with
789 "enable-deprecated". In addition applications wishing to use deprecated
790 functions must define OPENSSL_USE_DEPRECATED. Note that this new behaviour
791 will, by default, disable some transitive includes that previously existed
792 in the header files (e.g. ec.h will no longer, by default, include bn.h)
795 *) Added support for OCB mode. OpenSSL has been granted a patent license
796 compatible with the OpenSSL license for use of OCB. Details are available
797 at https://www.openssl.org/source/OCB-patent-grant-OpenSSL.pdf. Support
798 for OCB can be removed by calling config with no-ocb.
801 *) SSLv2 support has been removed. It still supports receiving a SSLv2
802 compatible client hello.
805 *) Increased the minimal RSA keysize from 256 to 512 bits [Rich Salz],
806 done while fixing the error code for the key-too-small case.
807 [Annie Yousar <a.yousar@informatik.hu-berlin.de>]
809 *) CA.sh has been removmed; use CA.pl instead.
812 *) Removed old DES API.
815 *) Remove various unsupported platforms:
821 Sinix/ReliantUNIX RM400
826 16-bit platforms such as WIN16
829 *) Clean up OPENSSL_NO_xxx #define's
830 Use setbuf() and remove OPENSSL_NO_SETVBUF_IONBF
831 Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
832 OPENSSL_NO_EC{DH,DSA} merged into OPENSSL_NO_EC
833 OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
834 OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
835 Remove OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
836 OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
837 OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
838 OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
839 Remove MS_STATIC; it's a relic from platforms <32 bits.
842 *) Cleaned up dead code
843 Remove all but one '#ifdef undef' which is to be looked at.
846 *) Clean up calling of xxx_free routines.
847 Just like free(), fix most of the xxx_free routines to accept
848 NULL. Remove the non-null checks from callers. Save much code.
851 *) Add secure heap for storage of private keys (when possible).
852 Add BIO_s_secmem(), CBIGNUM, etc.
853 Contributed by Akamai Technologies under our Corporate CLA.
856 *) Experimental support for a new, fast, unbiased prime candidate generator,
857 bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
858 [Felix Laurie von Massenbach <felix@erbridge.co.uk>]
860 *) New output format NSS in the sess_id command line tool. This allows
861 exporting the session id and the master key in NSS keylog format.
862 [Martin Kaiser <martin@kaiser.cx>]
864 *) Harmonize version and its documentation. -f flag is used to display
866 [mancha <mancha1@zoho.com>]
868 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
869 in i2d_ECPrivateKey. Thanks to Ted Unangst for feedback on this issue.
870 [mancha <mancha1@zoho.com>]
872 *) Fix some double frees. These are not thought to be exploitable.
873 [mancha <mancha1@zoho.com>]
875 *) A missing bounds check in the handling of the TLS heartbeat extension
876 can be used to reveal up to 64k of memory to a connected client or
879 Thanks for Neel Mehta of Google Security for discovering this bug and to
880 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
881 preparing the fix (CVE-2014-0160)
882 [Adam Langley, Bodo Moeller]
884 *) Fix for the attack described in the paper "Recovering OpenSSL
885 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
886 by Yuval Yarom and Naomi Benger. Details can be obtained from:
887 http://eprint.iacr.org/2014/140
889 Thanks to Yuval Yarom and Naomi Benger for discovering this
890 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
891 [Yuval Yarom and Naomi Benger]
893 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
894 this fixes a limitation in previous versions of OpenSSL.
897 *) Experimental encrypt-then-mac support.
899 Experimental support for encrypt then mac from
900 draft-gutmann-tls-encrypt-then-mac-02.txt
902 To enable it set the appropriate extension number (0x42 for the test
903 server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
905 For non-compliant peers (i.e. just about everything) this should have no
908 WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
912 *) Add EVP support for key wrapping algorithms, to avoid problems with
913 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
914 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
915 algorithms and include tests cases.
918 *) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
922 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
923 MGF1 digest and OAEP label.
926 *) Make openssl verify return errors.
927 [Chris Palmer <palmer@google.com> and Ben Laurie]
929 *) New function ASN1_TIME_diff to calculate the difference between two
930 ASN1_TIME structures or one structure and the current time.
933 *) Update fips_test_suite to support multiple command line options. New
934 test to induce all self test errors in sequence and check expected
938 *) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
939 sign or verify all in one operation.
942 *) Add fips_algvs: a multicall fips utility incorporating all the algorithm
943 test programs and fips_test_suite. Includes functionality to parse
944 the minimal script output of fipsalgest.pl directly.
947 *) Add authorisation parameter to FIPS_module_mode_set().
950 *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
953 *) Use separate DRBG fields for internal and external flags. New function
954 FIPS_drbg_health_check() to perform on demand health checking. Add
955 generation tests to fips_test_suite with reduced health check interval to
956 demonstrate periodic health checking. Add "nodh" option to
957 fips_test_suite to skip very slow DH test.
960 *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
964 *) More extensive health check for DRBG checking many more failure modes.
965 New function FIPS_selftest_drbg_all() to handle every possible DRBG
966 combination: call this in fips_test_suite.
969 *) Add support for canonical generation of DSA parameter 'g'. See
972 *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
973 POST to handle HMAC cases.
976 *) Add functions FIPS_module_version() and FIPS_module_version_text()
977 to return numerical and string versions of the FIPS module number.
980 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
981 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
982 outside the validated module in the FIPS capable OpenSSL.
985 *) Minor change to DRBG entropy callback semantics. In some cases
986 there is no multiple of the block length between min_len and
987 max_len. Allow the callback to return more than max_len bytes
988 of entropy but discard any extra: it is the callback's responsibility
989 to ensure that the extra data discarded does not impact the
990 requested amount of entropy.
993 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
994 information in FIPS186-3, SP800-57 and SP800-131A.
997 *) CCM support via EVP. Interface is very similar to GCM case except we
998 must supply all data in one chunk (i.e. no update, final) and the
999 message length must be supplied if AAD is used. Add algorithm test
1003 *) Initial version of POST overhaul. Add POST callback to allow the status
1004 of POST to be monitored and/or failures induced. Modify fips_test_suite
1005 to use callback. Always run all selftests even if one fails.
1008 *) XTS support including algorithm test driver in the fips_gcmtest program.
1009 Note: this does increase the maximum key length from 32 to 64 bytes but
1010 there should be no binary compatibility issues as existing applications
1011 will never use XTS mode.
1014 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
1015 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
1016 performs algorithm blocking for unapproved PRNG types. Also do not
1017 set PRNG type in FIPS_mode_set(): leave this to the application.
1018 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
1019 the standard OpenSSL PRNG: set additional data to a date time vector.
1022 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
1023 This shouldn't present any incompatibility problems because applications
1024 shouldn't be using these directly and any that are will need to rethink
1025 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
1028 *) Extensive self tests and health checking required by SP800-90 DRBG.
1029 Remove strength parameter from FIPS_drbg_instantiate and always
1030 instantiate at maximum supported strength.
1033 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
1036 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
1039 *) New function DH_compute_key_padded() to compute a DH key and pad with
1040 leading zeroes if needed: this complies with SP800-56A et al.
1043 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
1044 anything, incomplete, subject to change and largely untested at present.
1047 *) Modify fipscanisteronly build option to only build the necessary object
1048 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
1051 *) Add experimental option FIPSSYMS to give all symbols in
1052 fipscanister.o and FIPS or fips prefix. This will avoid
1053 conflicts with future versions of OpenSSL. Add perl script
1054 util/fipsas.pl to preprocess assembly language source files
1055 and rename any affected symbols.
1058 *) Add selftest checks and algorithm block of non-fips algorithms in
1059 FIPS mode. Remove DES2 from selftests.
1062 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
1063 return internal method without any ENGINE dependencies. Add new
1064 tiny fips sign and verify functions.
1067 *) New build option no-ec2m to disable characteristic 2 code.
1070 *) New build option "fipscanisteronly". This only builds fipscanister.o
1071 and (currently) associated fips utilities. Uses the file Makefile.fips
1072 instead of Makefile.org as the prototype.
1075 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
1076 Update fips_gcmtest to use IV generator.
1079 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
1080 setting output buffer to NULL. The *Final function must be
1081 called although it will not retrieve any additional data. The tag
1082 can be set or retrieved with a ctrl. The IV length is by default 12
1083 bytes (96 bits) but can be set to an alternative value. If the IV
1084 length exceeds the maximum IV length (currently 16 bytes) it cannot be
1088 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
1089 underlying do_cipher function handles all cipher semantics itself
1090 including padding and finalisation. This is useful if (for example)
1091 an ENGINE cipher handles block padding itself. The behaviour of
1092 do_cipher is subtly changed if this flag is set: the return value
1093 is the number of characters written to the output buffer (zero is
1094 no longer an error code) or a negative error code. Also if the
1095 input buffer is NULL and length 0 finalisation should be performed.
1098 *) If a candidate issuer certificate is already part of the constructed
1099 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
1102 *) Improve forward-security support: add functions
1104 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
1105 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
1107 for use by SSL/TLS servers; the callback function will be called whenever a
1108 new session is created, and gets to decide whether the session may be
1109 cached to make it resumable (return 0) or not (return 1). (As by the
1110 SSL/TLS protocol specifications, the session_id sent by the server will be
1111 empty to indicate that the session is not resumable; also, the server will
1112 not generate RFC 4507 (RFC 5077) session tickets.)
1114 A simple reasonable callback implementation is to return is_forward_secure.
1115 This parameter will be set to 1 or 0 depending on the ciphersuite selected
1116 by the SSL/TLS server library, indicating whether it can provide forward
1118 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1120 *) New -verify_name option in command line utilities to set verification
1124 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
1125 Add CMAC pkey methods.
1128 *) Experimental renegotiation in s_server -www mode. If the client
1129 browses /reneg connection is renegotiated. If /renegcert it is
1130 renegotiated requesting a certificate.
1133 *) Add an "external" session cache for debugging purposes to s_server. This
1134 should help trace issues which normally are only apparent in deployed
1135 multi-process servers.
1138 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
1139 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
1140 BIO_set_cipher() and some obscure PEM functions were changed so they
1141 can now return an error. The RAND changes required a change to the
1142 RAND_METHOD structure.
1145 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
1146 a gcc attribute to warn if the result of a function is ignored. This
1147 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
1148 whose return value is often ignored.
1151 *) New -noct, -requestct, -requirect and -ctlogfile options for s_client.
1152 These allow SCTs (signed certificate timestamps) to be requested and
1153 validated when establishing a connection.
1154 [Rob Percival <robpercival@google.com>]
1156 Changes between 1.0.2g and 1.0.2h [3 May 2016]
1158 *) Prevent padding oracle in AES-NI CBC MAC check
1160 A MITM attacker can use a padding oracle attack to decrypt traffic
1161 when the connection uses an AES CBC cipher and the server support
1164 This issue was introduced as part of the fix for Lucky 13 padding
1165 attack (CVE-2013-0169). The padding check was rewritten to be in
1166 constant time by making sure that always the same bytes are read and
1167 compared against either the MAC or padding bytes. But it no longer
1168 checked that there was enough data to have both the MAC and padding
1171 This issue was reported by Juraj Somorovsky using TLS-Attacker.
1175 *) Fix EVP_EncodeUpdate overflow
1177 An overflow can occur in the EVP_EncodeUpdate() function which is used for
1178 Base64 encoding of binary data. If an attacker is able to supply very large
1179 amounts of input data then a length check can overflow resulting in a heap
1182 Internally to OpenSSL the EVP_EncodeUpdate() function is primarily used by
1183 the PEM_write_bio* family of functions. These are mainly used within the
1184 OpenSSL command line applications, so any application which processes data
1185 from an untrusted source and outputs it as a PEM file should be considered
1186 vulnerable to this issue. User applications that call these APIs directly
1187 with large amounts of untrusted data may also be vulnerable.
1189 This issue was reported by Guido Vranken.
1193 *) Fix EVP_EncryptUpdate overflow
1195 An overflow can occur in the EVP_EncryptUpdate() function. If an attacker
1196 is able to supply very large amounts of input data after a previous call to
1197 EVP_EncryptUpdate() with a partial block then a length check can overflow
1198 resulting in a heap corruption. Following an analysis of all OpenSSL
1199 internal usage of the EVP_EncryptUpdate() function all usage is one of two
1200 forms. The first form is where the EVP_EncryptUpdate() call is known to be
1201 the first called function after an EVP_EncryptInit(), and therefore that
1202 specific call must be safe. The second form is where the length passed to
1203 EVP_EncryptUpdate() can be seen from the code to be some small value and
1204 therefore there is no possibility of an overflow. Since all instances are
1205 one of these two forms, it is believed that there can be no overflows in
1206 internal code due to this problem. It should be noted that
1207 EVP_DecryptUpdate() can call EVP_EncryptUpdate() in certain code paths.
1208 Also EVP_CipherUpdate() is a synonym for EVP_EncryptUpdate(). All instances
1209 of these calls have also been analysed too and it is believed there are no
1210 instances in internal usage where an overflow could occur.
1212 This issue was reported by Guido Vranken.
1216 *) Prevent ASN.1 BIO excessive memory allocation
1218 When ASN.1 data is read from a BIO using functions such as d2i_CMS_bio()
1219 a short invalid encoding can cause allocation of large amounts of memory
1220 potentially consuming excessive resources or exhausting memory.
1222 Any application parsing untrusted data through d2i BIO functions is
1223 affected. The memory based functions such as d2i_X509() are *not* affected.
1224 Since the memory based functions are used by the TLS library, TLS
1225 applications are not affected.
1227 This issue was reported by Brian Carpenter.
1233 ASN1 Strings that are over 1024 bytes can cause an overread in applications
1234 using the X509_NAME_oneline() function on EBCDIC systems. This could result
1235 in arbitrary stack data being returned in the buffer.
1237 This issue was reported by Guido Vranken.
1241 *) Modify behavior of ALPN to invoke callback after SNI/servername
1242 callback, such that updates to the SSL_CTX affect ALPN.
1245 *) Remove LOW from the DEFAULT cipher list. This removes singles DES from the
1249 *) Only remove the SSLv2 methods with the no-ssl2-method option. When the
1250 methods are enabled and ssl2 is disabled the methods return NULL.
1253 Changes between 1.0.2f and 1.0.2g [1 Mar 2016]
1255 * Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
1256 Builds that are not configured with "enable-weak-ssl-ciphers" will not
1257 provide any "EXPORT" or "LOW" strength ciphers.
1260 * Disable SSLv2 default build, default negotiation and weak ciphers. SSLv2
1261 is by default disabled at build-time. Builds that are not configured with
1262 "enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used,
1263 users who want to negotiate SSLv2 via the version-flexible SSLv23_method()
1264 will need to explicitly call either of:
1266 SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
1268 SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
1270 as appropriate. Even if either of those is used, or the application
1271 explicitly uses the version-specific SSLv2_method() or its client and
1272 server variants, SSLv2 ciphers vulnerable to exhaustive search key
1273 recovery have been removed. Specifically, the SSLv2 40-bit EXPORT
1274 ciphers, and SSLv2 56-bit DES are no longer available.
1278 *) Fix a double-free in DSA code
1280 A double free bug was discovered when OpenSSL parses malformed DSA private
1281 keys and could lead to a DoS attack or memory corruption for applications
1282 that receive DSA private keys from untrusted sources. This scenario is
1285 This issue was reported to OpenSSL by Adam Langley(Google/BoringSSL) using
1290 *) Disable SRP fake user seed to address a server memory leak.
1292 Add a new method SRP_VBASE_get1_by_user that handles the seed properly.
1294 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
1295 In order to fix an unavoidable memory leak, SRP_VBASE_get_by_user
1296 was changed to ignore the "fake user" SRP seed, even if the seed
1299 Users should use SRP_VBASE_get1_by_user instead. Note that in
1300 SRP_VBASE_get1_by_user, caller must free the returned value. Note
1301 also that even though configuring the SRP seed attempts to hide
1302 invalid usernames by continuing the handshake with fake
1303 credentials, this behaviour is not constant time and no strong
1304 guarantees are made that the handshake is indistinguishable from
1305 that of a valid user.
1309 *) Fix BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
1311 In the BN_hex2bn function the number of hex digits is calculated using an
1312 int value |i|. Later |bn_expand| is called with a value of |i * 4|. For
1313 large values of |i| this can result in |bn_expand| not allocating any
1314 memory because |i * 4| is negative. This can leave the internal BIGNUM data
1315 field as NULL leading to a subsequent NULL ptr deref. For very large values
1316 of |i|, the calculation |i * 4| could be a positive value smaller than |i|.
1317 In this case memory is allocated to the internal BIGNUM data field, but it
1318 is insufficiently sized leading to heap corruption. A similar issue exists
1319 in BN_dec2bn. This could have security consequences if BN_hex2bn/BN_dec2bn
1320 is ever called by user applications with very large untrusted hex/dec data.
1321 This is anticipated to be a rare occurrence.
1323 All OpenSSL internal usage of these functions use data that is not expected
1324 to be untrusted, e.g. config file data or application command line
1325 arguments. If user developed applications generate config file data based
1326 on untrusted data then it is possible that this could also lead to security
1327 consequences. This is also anticipated to be rare.
1329 This issue was reported to OpenSSL by Guido Vranken.
1333 *) Fix memory issues in BIO_*printf functions
1335 The internal |fmtstr| function used in processing a "%s" format string in
1336 the BIO_*printf functions could overflow while calculating the length of a
1337 string and cause an OOB read when printing very long strings.
1339 Additionally the internal |doapr_outch| function can attempt to write to an
1340 OOB memory location (at an offset from the NULL pointer) in the event of a
1341 memory allocation failure. In 1.0.2 and below this could be caused where
1342 the size of a buffer to be allocated is greater than INT_MAX. E.g. this
1343 could be in processing a very long "%s" format string. Memory leaks can
1346 The first issue may mask the second issue dependent on compiler behaviour.
1347 These problems could enable attacks where large amounts of untrusted data
1348 is passed to the BIO_*printf functions. If applications use these functions
1349 in this way then they could be vulnerable. OpenSSL itself uses these
1350 functions when printing out human-readable dumps of ASN.1 data. Therefore
1351 applications that print this data could be vulnerable if the data is from
1352 untrusted sources. OpenSSL command line applications could also be
1353 vulnerable where they print out ASN.1 data, or if untrusted data is passed
1354 as command line arguments.
1356 Libssl is not considered directly vulnerable. Additionally certificates etc
1357 received via remote connections via libssl are also unlikely to be able to
1358 trigger these issues because of message size limits enforced within libssl.
1360 This issue was reported to OpenSSL Guido Vranken.
1364 *) Side channel attack on modular exponentiation
1366 A side-channel attack was found which makes use of cache-bank conflicts on
1367 the Intel Sandy-Bridge microarchitecture which could lead to the recovery
1368 of RSA keys. The ability to exploit this issue is limited as it relies on
1369 an attacker who has control of code in a thread running on the same
1370 hyper-threaded core as the victim thread which is performing decryptions.
1372 This issue was reported to OpenSSL by Yuval Yarom, The University of
1373 Adelaide and NICTA, Daniel Genkin, Technion and Tel Aviv University, and
1374 Nadia Heninger, University of Pennsylvania with more information at
1375 http://cachebleed.info.
1379 *) Change the req app to generate a 2048-bit RSA/DSA key by default,
1380 if no keysize is specified with default_bits. This fixes an
1381 omission in an earlier change that changed all RSA/DSA key generation
1382 apps to use 2048 bits by default.
1385 Changes between 1.0.2e and 1.0.2f [28 Jan 2016]
1386 *) DH small subgroups
1388 Historically OpenSSL only ever generated DH parameters based on "safe"
1389 primes. More recently (in version 1.0.2) support was provided for
1390 generating X9.42 style parameter files such as those required for RFC 5114
1391 support. The primes used in such files may not be "safe". Where an
1392 application is using DH configured with parameters based on primes that are
1393 not "safe" then an attacker could use this fact to find a peer's private
1394 DH exponent. This attack requires that the attacker complete multiple
1395 handshakes in which the peer uses the same private DH exponent. For example
1396 this could be used to discover a TLS server's private DH exponent if it's
1397 reusing the private DH exponent or it's using a static DH ciphersuite.
1399 OpenSSL provides the option SSL_OP_SINGLE_DH_USE for ephemeral DH (DHE) in
1400 TLS. It is not on by default. If the option is not set then the server
1401 reuses the same private DH exponent for the life of the server process and
1402 would be vulnerable to this attack. It is believed that many popular
1403 applications do set this option and would therefore not be at risk.
1405 The fix for this issue adds an additional check where a "q" parameter is
1406 available (as is the case in X9.42 based parameters). This detects the
1407 only known attack, and is the only possible defense for static DH
1408 ciphersuites. This could have some performance impact.
1410 Additionally the SSL_OP_SINGLE_DH_USE option has been switched on by
1411 default and cannot be disabled. This could have some performance impact.
1413 This issue was reported to OpenSSL by Antonio Sanso (Adobe).
1417 *) SSLv2 doesn't block disabled ciphers
1419 A malicious client can negotiate SSLv2 ciphers that have been disabled on
1420 the server and complete SSLv2 handshakes even if all SSLv2 ciphers have
1421 been disabled, provided that the SSLv2 protocol was not also disabled via
1424 This issue was reported to OpenSSL on 26th December 2015 by Nimrod Aviram
1425 and Sebastian Schinzel.
1429 Changes between 1.0.2d and 1.0.2e [3 Dec 2015]
1431 *) BN_mod_exp may produce incorrect results on x86_64
1433 There is a carry propagating bug in the x86_64 Montgomery squaring
1434 procedure. No EC algorithms are affected. Analysis suggests that attacks
1435 against RSA and DSA as a result of this defect would be very difficult to
1436 perform and are not believed likely. Attacks against DH are considered just
1437 feasible (although very difficult) because most of the work necessary to
1438 deduce information about a private key may be performed offline. The amount
1439 of resources required for such an attack would be very significant and
1440 likely only accessible to a limited number of attackers. An attacker would
1441 additionally need online access to an unpatched system using the target
1442 private key in a scenario with persistent DH parameters and a private
1443 key that is shared between multiple clients. For example this can occur by
1444 default in OpenSSL DHE based SSL/TLS ciphersuites.
1446 This issue was reported to OpenSSL by Hanno Böck.
1450 *) Certificate verify crash with missing PSS parameter
1452 The signature verification routines will crash with a NULL pointer
1453 dereference if presented with an ASN.1 signature using the RSA PSS
1454 algorithm and absent mask generation function parameter. Since these
1455 routines are used to verify certificate signature algorithms this can be
1456 used to crash any certificate verification operation and exploited in a
1457 DoS attack. Any application which performs certificate verification is
1458 vulnerable including OpenSSL clients and servers which enable client
1461 This issue was reported to OpenSSL by Loïc Jonas Etienne (Qnective AG).
1465 *) X509_ATTRIBUTE memory leak
1467 When presented with a malformed X509_ATTRIBUTE structure OpenSSL will leak
1468 memory. This structure is used by the PKCS#7 and CMS routines so any
1469 application which reads PKCS#7 or CMS data from untrusted sources is
1470 affected. SSL/TLS is not affected.
1472 This issue was reported to OpenSSL by Adam Langley (Google/BoringSSL) using
1477 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
1478 This changes the decoding behaviour for some invalid messages,
1479 though the change is mostly in the more lenient direction, and
1480 legacy behaviour is preserved as much as possible.
1483 *) In DSA_generate_parameters_ex, if the provided seed is too short,
1485 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
1487 Changes between 1.0.2c and 1.0.2d [9 Jul 2015]
1489 *) Alternate chains certificate forgery
1491 During certificate verification, OpenSSL will attempt to find an
1492 alternative certificate chain if the first attempt to build such a chain
1493 fails. An error in the implementation of this logic can mean that an
1494 attacker could cause certain checks on untrusted certificates to be
1495 bypassed, such as the CA flag, enabling them to use a valid leaf
1496 certificate to act as a CA and "issue" an invalid certificate.
1498 This issue was reported to OpenSSL by Adam Langley/David Benjamin
1502 Changes between 1.0.2b and 1.0.2c [12 Jun 2015]
1504 *) Fix HMAC ABI incompatibility. The previous version introduced an ABI
1505 incompatibility in the handling of HMAC. The previous ABI has now been
1509 Changes between 1.0.2a and 1.0.2b [11 Jun 2015]
1511 *) Malformed ECParameters causes infinite loop
1513 When processing an ECParameters structure OpenSSL enters an infinite loop
1514 if the curve specified is over a specially malformed binary polynomial
1517 This can be used to perform denial of service against any
1518 system which processes public keys, certificate requests or
1519 certificates. This includes TLS clients and TLS servers with
1520 client authentication enabled.
1522 This issue was reported to OpenSSL by Joseph Barr-Pixton.
1526 *) Exploitable out-of-bounds read in X509_cmp_time
1528 X509_cmp_time does not properly check the length of the ASN1_TIME
1529 string and can read a few bytes out of bounds. In addition,
1530 X509_cmp_time accepts an arbitrary number of fractional seconds in the
1533 An attacker can use this to craft malformed certificates and CRLs of
1534 various sizes and potentially cause a segmentation fault, resulting in
1535 a DoS on applications that verify certificates or CRLs. TLS clients
1536 that verify CRLs are affected. TLS clients and servers with client
1537 authentication enabled may be affected if they use custom verification
1540 This issue was reported to OpenSSL by Robert Swiecki (Google), and
1541 independently by Hanno Böck.
1545 *) PKCS7 crash with missing EnvelopedContent
1547 The PKCS#7 parsing code does not handle missing inner EncryptedContent
1548 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs
1549 with missing content and trigger a NULL pointer dereference on parsing.
1551 Applications that decrypt PKCS#7 data or otherwise parse PKCS#7
1552 structures from untrusted sources are affected. OpenSSL clients and
1553 servers are not affected.
1555 This issue was reported to OpenSSL by Michal Zalewski (Google).
1559 *) CMS verify infinite loop with unknown hash function
1561 When verifying a signedData message the CMS code can enter an infinite loop
1562 if presented with an unknown hash function OID. This can be used to perform
1563 denial of service against any system which verifies signedData messages using
1565 This issue was reported to OpenSSL by Johannes Bauer.
1569 *) Race condition handling NewSessionTicket
1571 If a NewSessionTicket is received by a multi-threaded client when attempting to
1572 reuse a previous ticket then a race condition can occur potentially leading to
1573 a double free of the ticket data.
1577 *) Only support 256-bit or stronger elliptic curves with the
1578 'ecdh_auto' setting (server) or by default (client). Of supported
1579 curves, prefer P-256 (both).
1582 Changes between 1.0.2 and 1.0.2a [19 Mar 2015]
1584 *) ClientHello sigalgs DoS fix
1586 If a client connects to an OpenSSL 1.0.2 server and renegotiates with an
1587 invalid signature algorithms extension a NULL pointer dereference will
1588 occur. This can be exploited in a DoS attack against the server.
1590 This issue was was reported to OpenSSL by David Ramos of Stanford
1593 [Stephen Henson and Matt Caswell]
1595 *) Multiblock corrupted pointer fix
1597 OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
1598 feature only applies on 64 bit x86 architecture platforms that support AES
1599 NI instructions. A defect in the implementation of "multiblock" can cause
1600 OpenSSL's internal write buffer to become incorrectly set to NULL when
1601 using non-blocking IO. Typically, when the user application is using a
1602 socket BIO for writing, this will only result in a failed connection.
1603 However if some other BIO is used then it is likely that a segmentation
1604 fault will be triggered, thus enabling a potential DoS attack.
1606 This issue was reported to OpenSSL by Daniel Danner and Rainer Mueller.
1610 *) Segmentation fault in DTLSv1_listen fix
1612 The DTLSv1_listen function is intended to be stateless and processes the
1613 initial ClientHello from many peers. It is common for user code to loop
1614 over the call to DTLSv1_listen until a valid ClientHello is received with
1615 an associated cookie. A defect in the implementation of DTLSv1_listen means
1616 that state is preserved in the SSL object from one invocation to the next
1617 that can lead to a segmentation fault. Errors processing the initial
1618 ClientHello can trigger this scenario. An example of such an error could be
1619 that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
1622 This issue was reported to OpenSSL by Per Allansson.
1626 *) Segmentation fault in ASN1_TYPE_cmp fix
1628 The function ASN1_TYPE_cmp will crash with an invalid read if an attempt is
1629 made to compare ASN.1 boolean types. Since ASN1_TYPE_cmp is used to check
1630 certificate signature algorithm consistency this can be used to crash any
1631 certificate verification operation and exploited in a DoS attack. Any
1632 application which performs certificate verification is vulnerable including
1633 OpenSSL clients and servers which enable client authentication.
1637 *) Segmentation fault for invalid PSS parameters fix
1639 The signature verification routines will crash with a NULL pointer
1640 dereference if presented with an ASN.1 signature using the RSA PSS
1641 algorithm and invalid parameters. Since these routines are used to verify
1642 certificate signature algorithms this can be used to crash any
1643 certificate verification operation and exploited in a DoS attack. Any
1644 application which performs certificate verification is vulnerable including
1645 OpenSSL clients and servers which enable client authentication.
1647 This issue was was reported to OpenSSL by Brian Carpenter.
1651 *) ASN.1 structure reuse memory corruption fix
1653 Reusing a structure in ASN.1 parsing may allow an attacker to cause
1654 memory corruption via an invalid write. Such reuse is and has been
1655 strongly discouraged and is believed to be rare.
1657 Applications that parse structures containing CHOICE or ANY DEFINED BY
1658 components may be affected. Certificate parsing (d2i_X509 and related
1659 functions) are however not affected. OpenSSL clients and servers are
1664 *) PKCS7 NULL pointer dereferences fix
1666 The PKCS#7 parsing code does not handle missing outer ContentInfo
1667 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs with
1668 missing content and trigger a NULL pointer dereference on parsing.
1670 Applications that verify PKCS#7 signatures, decrypt PKCS#7 data or
1671 otherwise parse PKCS#7 structures from untrusted sources are
1672 affected. OpenSSL clients and servers are not affected.
1674 This issue was reported to OpenSSL by Michal Zalewski (Google).
1678 *) DoS via reachable assert in SSLv2 servers fix
1680 A malicious client can trigger an OPENSSL_assert (i.e., an abort) in
1681 servers that both support SSLv2 and enable export cipher suites by sending
1682 a specially crafted SSLv2 CLIENT-MASTER-KEY message.
1684 This issue was discovered by Sean Burford (Google) and Emilia Käsper
1685 (OpenSSL development team).
1689 *) Empty CKE with client auth and DHE fix
1691 If client auth is used then a server can seg fault in the event of a DHE
1692 ciphersuite being selected and a zero length ClientKeyExchange message
1693 being sent by the client. This could be exploited in a DoS attack.
1697 *) Handshake with unseeded PRNG fix
1699 Under certain conditions an OpenSSL 1.0.2 client can complete a handshake
1700 with an unseeded PRNG. The conditions are:
1701 - The client is on a platform where the PRNG has not been seeded
1702 automatically, and the user has not seeded manually
1703 - A protocol specific client method version has been used (i.e. not
1704 SSL_client_methodv23)
1705 - A ciphersuite is used that does not require additional random data from
1706 the PRNG beyond the initial ClientHello client random (e.g. PSK-RC4-SHA).
1708 If the handshake succeeds then the client random that has been used will
1709 have been generated from a PRNG with insufficient entropy and therefore the
1710 output may be predictable.
1712 For example using the following command with an unseeded openssl will
1713 succeed on an unpatched platform:
1715 openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
1719 *) Use After Free following d2i_ECPrivatekey error fix
1721 A malformed EC private key file consumed via the d2i_ECPrivateKey function
1722 could cause a use after free condition. This, in turn, could cause a double
1723 free in several private key parsing functions (such as d2i_PrivateKey
1724 or EVP_PKCS82PKEY) and could lead to a DoS attack or memory corruption
1725 for applications that receive EC private keys from untrusted
1726 sources. This scenario is considered rare.
1728 This issue was discovered by the BoringSSL project and fixed in their
1733 *) X509_to_X509_REQ NULL pointer deref fix
1735 The function X509_to_X509_REQ will crash with a NULL pointer dereference if
1736 the certificate key is invalid. This function is rarely used in practice.
1738 This issue was discovered by Brian Carpenter.
1742 *) Removed the export ciphers from the DEFAULT ciphers
1745 Changes between 1.0.1l and 1.0.2 [22 Jan 2015]
1747 *) Facilitate "universal" ARM builds targeting range of ARM ISAs, e.g.
1748 ARMv5 through ARMv8, as opposite to "locking" it to single one.
1749 So far those who have to target multiple platforms would compromise
1750 and argue that binary targeting say ARMv5 would still execute on
1751 ARMv8. "Universal" build resolves this compromise by providing
1752 near-optimal performance even on newer platforms.
1755 *) Accelerated NIST P-256 elliptic curve implementation for x86_64
1756 (other platforms pending).
1757 [Shay Gueron & Vlad Krasnov (Intel Corp), Andy Polyakov]
1759 *) Add support for the SignedCertificateTimestampList certificate and
1760 OCSP response extensions from RFC6962.
1763 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
1764 for corner cases. (Certain input points at infinity could lead to
1765 bogus results, with non-infinity inputs mapped to infinity too.)
1768 *) Initial support for PowerISA 2.0.7, first implemented in POWER8.
1769 This covers AES, SHA256/512 and GHASH. "Initial" means that most
1770 common cases are optimized and there still is room for further
1771 improvements. Vector Permutation AES for Altivec is also added.
1774 *) Add support for little-endian ppc64 Linux target.
1775 [Marcelo Cerri (IBM)]
1777 *) Initial support for AMRv8 ISA crypto extensions. This covers AES,
1778 SHA1, SHA256 and GHASH. "Initial" means that most common cases
1779 are optimized and there still is room for further improvements.
1780 Both 32- and 64-bit modes are supported.
1781 [Andy Polyakov, Ard Biesheuvel (Linaro)]
1783 *) Improved ARMv7 NEON support.
1786 *) Support for SPARC Architecture 2011 crypto extensions, first
1787 implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
1788 SHA256/512, MD5, GHASH and modular exponentiation.
1789 [Andy Polyakov, David Miller]
1791 *) Accelerated modular exponentiation for Intel processors, a.k.a.
1793 [Shay Gueron & Vlad Krasnov (Intel Corp)]
1795 *) Support for new and upcoming Intel processors, including AVX2,
1796 BMI and SHA ISA extensions. This includes additional "stitched"
1797 implementations, AESNI-SHA256 and GCM, and multi-buffer support
1800 This work was sponsored by Intel Corp.
1803 *) Support for DTLS 1.2. This adds two sets of DTLS methods: DTLS_*_method()
1804 supports both DTLS 1.2 and 1.0 and should use whatever version the peer
1805 supports and DTLSv1_2_*_method() which supports DTLS 1.2 only.
1808 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
1809 this fixes a limitation in previous versions of OpenSSL.
1812 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
1813 MGF1 digest and OAEP label.
1816 *) Add EVP support for key wrapping algorithms, to avoid problems with
1817 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
1818 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
1819 algorithms and include tests cases.
1822 *) Add functions to allocate and set the fields of an ECDSA_METHOD
1824 [Douglas E. Engert, Steve Henson]
1826 *) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
1827 difference in days and seconds between two tm or ASN1_TIME structures.
1830 *) Add -rev test option to s_server to just reverse order of characters
1831 received by client and send back to server. Also prints an abbreviated
1832 summary of the connection parameters.
1835 *) New option -brief for s_client and s_server to print out a brief summary
1836 of connection parameters.
1839 *) Add callbacks for arbitrary TLS extensions.
1840 [Trevor Perrin <trevp@trevp.net> and Ben Laurie]
1842 *) New option -crl_download in several openssl utilities to download CRLs
1843 from CRLDP extension in certificates.
1846 *) New options -CRL and -CRLform for s_client and s_server for CRLs.
1849 *) New function X509_CRL_diff to generate a delta CRL from the difference
1850 of two full CRLs. Add support to "crl" utility.
1853 *) New functions to set lookup_crls function and to retrieve
1854 X509_STORE from X509_STORE_CTX.
1857 *) Print out deprecated issuer and subject unique ID fields in
1861 *) Extend OCSP I/O functions so they can be used for simple general purpose
1862 HTTP as well as OCSP. New wrapper function which can be used to download
1863 CRLs using the OCSP API.
1866 *) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
1869 *) SSL_CONF* functions. These provide a common framework for application
1870 configuration using configuration files or command lines.
1873 *) SSL/TLS tracing code. This parses out SSL/TLS records using the
1874 message callback and prints the results. Needs compile time option
1875 "enable-ssl-trace". New options to s_client and s_server to enable
1879 *) New ctrl and macro to retrieve supported points extensions.
1880 Print out extension in s_server and s_client.
1883 *) New functions to retrieve certificate signature and signature
1887 *) Add functions to retrieve and manipulate the raw cipherlist sent by a
1891 *) New Suite B modes for TLS code. These use and enforce the requirements
1892 of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
1893 only use Suite B curves. The Suite B modes can be set by using the
1894 strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
1897 *) New chain verification flags for Suite B levels of security. Check
1898 algorithms are acceptable when flags are set in X509_verify_cert.
1901 *) Make tls1_check_chain return a set of flags indicating checks passed
1902 by a certificate chain. Add additional tests to handle client
1903 certificates: checks for matching certificate type and issuer name
1907 *) If an attempt is made to use a signature algorithm not in the peer
1908 preference list abort the handshake. If client has no suitable
1909 signature algorithms in response to a certificate request do not
1910 use the certificate.
1913 *) If server EC tmp key is not in client preference list abort handshake.
1916 *) Add support for certificate stores in CERT structure. This makes it
1917 possible to have different stores per SSL structure or one store in
1918 the parent SSL_CTX. Include distinct stores for certificate chain
1919 verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
1920 to build and store a certificate chain in CERT structure: returning
1921 an error if the chain cannot be built: this will allow applications
1922 to test if a chain is correctly configured.
1924 Note: if the CERT based stores are not set then the parent SSL_CTX
1925 store is used to retain compatibility with existing behaviour.
1929 *) New function ssl_set_client_disabled to set a ciphersuite disabled
1930 mask based on the current session, check mask when sending client
1931 hello and checking the requested ciphersuite.
1934 *) New ctrls to retrieve and set certificate types in a certificate
1935 request message. Print out received values in s_client. If certificate
1936 types is not set with custom values set sensible values based on
1937 supported signature algorithms.
1940 *) Support for distinct client and server supported signature algorithms.
1943 *) Add certificate callback. If set this is called whenever a certificate
1944 is required by client or server. An application can decide which
1945 certificate chain to present based on arbitrary criteria: for example
1946 supported signature algorithms. Add very simple example to s_server.
1947 This fixes many of the problems and restrictions of the existing client
1948 certificate callback: for example you can now clear an existing
1949 certificate and specify the whole chain.
1952 *) Add new "valid_flags" field to CERT_PKEY structure which determines what
1953 the certificate can be used for (if anything). Set valid_flags field
1954 in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
1955 to have similar checks in it.
1957 Add new "cert_flags" field to CERT structure and include a "strict mode".
1958 This enforces some TLS certificate requirements (such as only permitting
1959 certificate signature algorithms contained in the supported algorithms
1960 extension) which some implementations ignore: this option should be used
1961 with caution as it could cause interoperability issues.
1964 *) Update and tidy signature algorithm extension processing. Work out
1965 shared signature algorithms based on preferences and peer algorithms
1966 and print them out in s_client and s_server. Abort handshake if no
1967 shared signature algorithms.
1970 *) Add new functions to allow customised supported signature algorithms
1971 for SSL and SSL_CTX structures. Add options to s_client and s_server
1975 *) New function SSL_certs_clear() to delete all references to certificates
1976 from an SSL structure. Before this once a certificate had been added
1977 it couldn't be removed.
1980 *) Integrate hostname, email address and IP address checking with certificate
1981 verification. New verify options supporting checking in openssl utility.
1984 *) Fixes and wildcard matching support to hostname and email checking
1985 functions. Add manual page.
1986 [Florian Weimer (Red Hat Product Security Team)]
1988 *) New functions to check a hostname email or IP address against a
1989 certificate. Add options x509 utility to print results of checks against
1993 *) Fix OCSP checking.
1994 [Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
1996 *) Initial experimental support for explicitly trusted non-root CAs.
1997 OpenSSL still tries to build a complete chain to a root but if an
1998 intermediate CA has a trust setting included that is used. The first
1999 setting is used: whether to trust (e.g., -addtrust option to the x509
2003 *) Add -trusted_first option which attempts to find certificates in the
2004 trusted store even if an untrusted chain is also supplied.
2007 *) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
2008 platform support for Linux and Android.
2011 *) Support for linux-x32, ILP32 environment in x86_64 framework.
2014 *) Experimental multi-implementation support for FIPS capable OpenSSL.
2015 When in FIPS mode the approved implementations are used as normal,
2016 when not in FIPS mode the internal unapproved versions are used instead.
2017 This means that the FIPS capable OpenSSL isn't forced to use the
2018 (often lower performance) FIPS implementations outside FIPS mode.
2021 *) Transparently support X9.42 DH parameters when calling
2022 PEM_read_bio_DHparameters. This means existing applications can handle
2023 the new parameter format automatically.
2026 *) Initial experimental support for X9.42 DH parameter format: mainly
2027 to support use of 'q' parameter for RFC5114 parameters.
2030 *) Add DH parameters from RFC5114 including test data to dhtest.
2033 *) Support for automatic EC temporary key parameter selection. If enabled
2034 the most preferred EC parameters are automatically used instead of
2035 hardcoded fixed parameters. Now a server just has to call:
2036 SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
2037 support ECDH and use the most appropriate parameters.
2040 *) Enhance and tidy EC curve and point format TLS extension code. Use
2041 static structures instead of allocation if default values are used.
2042 New ctrls to set curves we wish to support and to retrieve shared curves.
2043 Print out shared curves in s_server. New options to s_server and s_client
2044 to set list of supported curves.
2047 *) New ctrls to retrieve supported signature algorithms and
2048 supported curve values as an array of NIDs. Extend openssl utility
2049 to print out received values.
2052 *) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
2053 between NIDs and the more common NIST names such as "P-256". Enhance
2054 ecparam utility and ECC method to recognise the NIST names for curves.
2057 *) Enhance SSL/TLS certificate chain handling to support different
2058 chains for each certificate instead of one chain in the parent SSL_CTX.
2061 *) Support for fixed DH ciphersuite client authentication: where both
2062 server and client use DH certificates with common parameters.
2065 *) Support for fixed DH ciphersuites: those requiring DH server
2069 *) New function i2d_re_X509_tbs for re-encoding the TBS portion of
2071 Note: Related 1.0.2-beta specific macros X509_get_cert_info,
2072 X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
2073 X509_CINF_get_signature were reverted post internal team review.
2075 Changes between 1.0.1k and 1.0.1l [15 Jan 2015]
2077 *) Build fixes for the Windows and OpenVMS platforms
2078 [Matt Caswell and Richard Levitte]
2080 Changes between 1.0.1j and 1.0.1k [8 Jan 2015]
2082 *) Fix DTLS segmentation fault in dtls1_get_record. A carefully crafted DTLS
2083 message can cause a segmentation fault in OpenSSL due to a NULL pointer
2084 dereference. This could lead to a Denial Of Service attack. Thanks to
2085 Markus Stenberg of Cisco Systems, Inc. for reporting this issue.
2089 *) Fix DTLS memory leak in dtls1_buffer_record. A memory leak can occur in the
2090 dtls1_buffer_record function under certain conditions. In particular this
2091 could occur if an attacker sent repeated DTLS records with the same
2092 sequence number but for the next epoch. The memory leak could be exploited
2093 by an attacker in a Denial of Service attack through memory exhaustion.
2094 Thanks to Chris Mueller for reporting this issue.
2098 *) Fix issue where no-ssl3 configuration sets method to NULL. When openssl is
2099 built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl
2100 method would be set to NULL which could later result in a NULL pointer
2101 dereference. Thanks to Frank Schmirler for reporting this issue.
2105 *) Abort handshake if server key exchange message is omitted for ephemeral
2108 Thanks to Karthikeyan Bhargavan of the PROSECCO team at INRIA for
2109 reporting this issue.
2113 *) Remove non-export ephemeral RSA code on client and server. This code
2114 violated the TLS standard by allowing the use of temporary RSA keys in
2115 non-export ciphersuites and could be used by a server to effectively
2116 downgrade the RSA key length used to a value smaller than the server
2117 certificate. Thanks for Karthikeyan Bhargavan of the PROSECCO team at
2118 INRIA or reporting this issue.
2122 *) Fixed issue where DH client certificates are accepted without verification.
2123 An OpenSSL server will accept a DH certificate for client authentication
2124 without the certificate verify message. This effectively allows a client to
2125 authenticate without the use of a private key. This only affects servers
2126 which trust a client certificate authority which issues certificates
2127 containing DH keys: these are extremely rare and hardly ever encountered.
2128 Thanks for Karthikeyan Bhargavan of the PROSECCO team at INRIA or reporting
2133 *) Ensure that the session ID context of an SSL is updated when its
2134 SSL_CTX is updated via SSL_set_SSL_CTX.
2136 The session ID context is typically set from the parent SSL_CTX,
2137 and can vary with the CTX.
2140 *) Fix various certificate fingerprint issues.
2142 By using non-DER or invalid encodings outside the signed portion of a
2143 certificate the fingerprint can be changed without breaking the signature.
2144 Although no details of the signed portion of the certificate can be changed
2145 this can cause problems with some applications: e.g. those using the
2146 certificate fingerprint for blacklists.
2148 1. Reject signatures with non zero unused bits.
2150 If the BIT STRING containing the signature has non zero unused bits reject
2151 the signature. All current signature algorithms require zero unused bits.
2153 2. Check certificate algorithm consistency.
2155 Check the AlgorithmIdentifier inside TBS matches the one in the
2156 certificate signature. NB: this will result in signature failure
2157 errors for some broken certificates.
2159 Thanks to Konrad Kraszewski from Google for reporting this issue.
2161 3. Check DSA/ECDSA signatures use DER.
2163 Re-encode DSA/ECDSA signatures and compare with the original received
2164 signature. Return an error if there is a mismatch.
2166 This will reject various cases including garbage after signature
2167 (thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
2168 program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
2169 (negative or with leading zeroes).
2171 Further analysis was conducted and fixes were developed by Stephen Henson
2172 of the OpenSSL core team.
2177 *) Correct Bignum squaring. Bignum squaring (BN_sqr) may produce incorrect
2178 results on some platforms, including x86_64. This bug occurs at random
2179 with a very low probability, and is not known to be exploitable in any
2180 way, though its exact impact is difficult to determine. Thanks to Pieter
2181 Wuille (Blockstream) who reported this issue and also suggested an initial
2182 fix. Further analysis was conducted by the OpenSSL development team and
2183 Adam Langley of Google. The final fix was developed by Andy Polyakov of
2184 the OpenSSL core team.
2188 *) Do not resume sessions on the server if the negotiated protocol
2189 version does not match the session's version. Resuming with a different
2190 version, while not strictly forbidden by the RFC, is of questionable
2191 sanity and breaks all known clients.
2192 [David Benjamin, Emilia Käsper]
2194 *) Tighten handling of the ChangeCipherSpec (CCS) message: reject
2195 early CCS messages during renegotiation. (Note that because
2196 renegotiation is encrypted, this early CCS was not exploitable.)
2199 *) Tighten client-side session ticket handling during renegotiation:
2200 ensure that the client only accepts a session ticket if the server sends
2201 the extension anew in the ServerHello. Previously, a TLS client would
2202 reuse the old extension state and thus accept a session ticket if one was
2203 announced in the initial ServerHello.
2205 Similarly, ensure that the client requires a session ticket if one
2206 was advertised in the ServerHello. Previously, a TLS client would
2207 ignore a missing NewSessionTicket message.
2210 Changes between 1.0.1i and 1.0.1j [15 Oct 2014]
2212 *) SRTP Memory Leak.
2214 A flaw in the DTLS SRTP extension parsing code allows an attacker, who
2215 sends a carefully crafted handshake message, to cause OpenSSL to fail
2216 to free up to 64k of memory causing a memory leak. This could be
2217 exploited in a Denial Of Service attack. This issue affects OpenSSL
2218 1.0.1 server implementations for both SSL/TLS and DTLS regardless of
2219 whether SRTP is used or configured. Implementations of OpenSSL that
2220 have been compiled with OPENSSL_NO_SRTP defined are not affected.
2222 The fix was developed by the OpenSSL team.
2226 *) Session Ticket Memory Leak.
2228 When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
2229 integrity of that ticket is first verified. In the event of a session
2230 ticket integrity check failing, OpenSSL will fail to free memory
2231 causing a memory leak. By sending a large number of invalid session
2232 tickets an attacker could exploit this issue in a Denial Of Service
2237 *) Build option no-ssl3 is incomplete.
2239 When OpenSSL is configured with "no-ssl3" as a build option, servers
2240 could accept and complete a SSL 3.0 handshake, and clients could be
2241 configured to send them.
2243 [Akamai and the OpenSSL team]
2245 *) Add support for TLS_FALLBACK_SCSV.
2246 Client applications doing fallback retries should call
2247 SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
2249 [Adam Langley, Bodo Moeller]
2251 *) Add additional DigestInfo checks.
2253 Re-encode DigestInto in DER and check against the original when
2254 verifying RSA signature: this will reject any improperly encoded
2255 DigestInfo structures.
2257 Note: this is a precautionary measure and no attacks are currently known.
2261 Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
2263 *) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
2264 SRP code can be overrun an internal buffer. Add sanity check that
2265 g, A, B < N to SRP code.
2267 Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
2268 Group for discovering this issue.
2272 *) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
2273 TLS 1.0 instead of higher protocol versions when the ClientHello message
2274 is badly fragmented. This allows a man-in-the-middle attacker to force a
2275 downgrade to TLS 1.0 even if both the server and the client support a
2276 higher protocol version, by modifying the client's TLS records.
2278 Thanks to David Benjamin and Adam Langley (Google) for discovering and
2279 researching this issue.
2283 *) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
2284 to a denial of service attack. A malicious server can crash the client
2285 with a null pointer dereference (read) by specifying an anonymous (EC)DH
2286 ciphersuite and sending carefully crafted handshake messages.
2288 Thanks to Felix Gröbert (Google) for discovering and researching this
2293 *) By sending carefully crafted DTLS packets an attacker could cause openssl
2294 to leak memory. This can be exploited through a Denial of Service attack.
2295 Thanks to Adam Langley for discovering and researching this issue.
2299 *) An attacker can force openssl to consume large amounts of memory whilst
2300 processing DTLS handshake messages. This can be exploited through a
2301 Denial of Service attack.
2302 Thanks to Adam Langley for discovering and researching this issue.
2306 *) An attacker can force an error condition which causes openssl to crash
2307 whilst processing DTLS packets due to memory being freed twice. This
2308 can be exploited through a Denial of Service attack.
2309 Thanks to Adam Langley and Wan-Teh Chang for discovering and researching
2314 *) If a multithreaded client connects to a malicious server using a resumed
2315 session and the server sends an ec point format extension it could write
2316 up to 255 bytes to freed memory.
2318 Thanks to Gabor Tyukasz (LogMeIn Inc) for discovering and researching this
2323 *) A malicious server can crash an OpenSSL client with a null pointer
2324 dereference (read) by specifying an SRP ciphersuite even though it was not
2325 properly negotiated with the client. This can be exploited through a
2326 Denial of Service attack.
2328 Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for
2329 discovering and researching this issue.
2333 *) A flaw in OBJ_obj2txt may cause pretty printing functions such as
2334 X509_name_oneline, X509_name_print_ex et al. to leak some information
2335 from the stack. Applications may be affected if they echo pretty printing
2336 output to the attacker.
2338 Thanks to Ivan Fratric (Google) for discovering this issue.
2340 [Emilia Käsper, and Steve Henson]
2342 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
2343 for corner cases. (Certain input points at infinity could lead to
2344 bogus results, with non-infinity inputs mapped to infinity too.)
2347 Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
2349 *) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
2350 handshake can force the use of weak keying material in OpenSSL
2351 SSL/TLS clients and servers.
2353 Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for discovering and
2354 researching this issue. (CVE-2014-0224)
2355 [KIKUCHI Masashi, Steve Henson]
2357 *) Fix DTLS recursion flaw. By sending an invalid DTLS handshake to an
2358 OpenSSL DTLS client the code can be made to recurse eventually crashing
2361 Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
2363 [Imre Rad, Steve Henson]
2365 *) Fix DTLS invalid fragment vulnerability. A buffer overrun attack can
2366 be triggered by sending invalid DTLS fragments to an OpenSSL DTLS
2367 client or server. This is potentially exploitable to run arbitrary
2368 code on a vulnerable client or server.
2370 Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195)
2371 [Jüri Aedla, Steve Henson]
2373 *) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites
2374 are subject to a denial of service attack.
2376 Thanks to Felix Gröbert and Ivan Fratric at Google for discovering
2377 this issue. (CVE-2014-3470)
2378 [Felix Gröbert, Ivan Fratric, Steve Henson]
2380 *) Harmonize version and its documentation. -f flag is used to display
2382 [mancha <mancha1@zoho.com>]
2384 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
2385 in i2d_ECPrivateKey.
2386 [mancha <mancha1@zoho.com>]
2388 *) Fix some double frees. These are not thought to be exploitable.
2389 [mancha <mancha1@zoho.com>]
2391 Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
2393 *) A missing bounds check in the handling of the TLS heartbeat extension
2394 can be used to reveal up to 64k of memory to a connected client or
2397 Thanks for Neel Mehta of Google Security for discovering this bug and to
2398 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
2399 preparing the fix (CVE-2014-0160)
2400 [Adam Langley, Bodo Moeller]
2402 *) Fix for the attack described in the paper "Recovering OpenSSL
2403 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
2404 by Yuval Yarom and Naomi Benger. Details can be obtained from:
2405 http://eprint.iacr.org/2014/140
2407 Thanks to Yuval Yarom and Naomi Benger for discovering this
2408 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
2409 [Yuval Yarom and Naomi Benger]
2411 *) TLS pad extension: draft-agl-tls-padding-03
2413 Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
2414 TLS client Hello record length value would otherwise be > 255 and
2415 less that 512 pad with a dummy extension containing zeroes so it
2416 is at least 512 bytes long.
2418 [Adam Langley, Steve Henson]
2420 Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
2422 *) Fix for TLS record tampering bug. A carefully crafted invalid
2423 handshake could crash OpenSSL with a NULL pointer exception.
2424 Thanks to Anton Johansson for reporting this issues.
2427 *) Keep original DTLS digest and encryption contexts in retransmission
2428 structures so we can use the previous session parameters if they need
2429 to be resent. (CVE-2013-6450)
2432 *) Add option SSL_OP_SAFARI_ECDHE_ECDSA_BUG (part of SSL_OP_ALL) which
2433 avoids preferring ECDHE-ECDSA ciphers when the client appears to be
2434 Safari on OS X. Safari on OS X 10.8..10.8.3 advertises support for
2435 several ECDHE-ECDSA ciphers, but fails to negotiate them. The bug
2436 is fixed in OS X 10.8.4, but Apple have ruled out both hot fixing
2437 10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
2438 [Rob Stradling, Adam Langley]
2440 Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
2442 *) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
2443 supporting platforms or when small records were transferred.
2444 [Andy Polyakov, Steve Henson]
2446 Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
2448 *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
2450 This addresses the flaw in CBC record processing discovered by
2451 Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
2452 at: http://www.isg.rhul.ac.uk/tls/
2454 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2455 Security Group at Royal Holloway, University of London
2456 (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
2457 Emilia Käsper for the initial patch.
2459 [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
2461 *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
2462 ciphersuites which can be exploited in a denial of service attack.
2463 Thanks go to and to Adam Langley <agl@chromium.org> for discovering
2464 and detecting this bug and to Wolfgang Ettlinger
2465 <wolfgang.ettlinger@gmail.com> for independently discovering this issue.
2469 *) Return an error when checking OCSP signatures when key is NULL.
2470 This fixes a DoS attack. (CVE-2013-0166)
2473 *) Make openssl verify return errors.
2474 [Chris Palmer <palmer@google.com> and Ben Laurie]
2476 *) Call OCSP Stapling callback after ciphersuite has been chosen, so
2477 the right response is stapled. Also change SSL_get_certificate()
2478 so it returns the certificate actually sent.
2479 See http://rt.openssl.org/Ticket/Display.html?id=2836.
2480 [Rob Stradling <rob.stradling@comodo.com>]
2482 *) Fix possible deadlock when decoding public keys.
2485 *) Don't use TLS 1.0 record version number in initial client hello
2489 Changes between 1.0.1b and 1.0.1c [10 May 2012]
2491 *) Sanity check record length before skipping explicit IV in TLS
2492 1.2, 1.1 and DTLS to fix DoS attack.
2494 Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
2495 fuzzing as a service testing platform.
2499 *) Initialise tkeylen properly when encrypting CMS messages.
2500 Thanks to Solar Designer of Openwall for reporting this issue.
2503 *) In FIPS mode don't try to use composite ciphers as they are not
2507 Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
2509 *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
2510 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
2511 mean any application compiled against OpenSSL 1.0.0 headers setting
2512 SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
2513 TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
2514 0x10000000L Any application which was previously compiled against
2515 OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
2516 will need to be recompiled as a result. Letting be results in
2517 inability to disable specifically TLS 1.1 and in client context,
2518 in unlike event, limit maximum offered version to TLS 1.0 [see below].
2521 *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
2522 disable just protocol X, but all protocols above X *if* there are
2523 protocols *below* X still enabled. In more practical terms it means
2524 that if application wants to disable TLS1.0 in favor of TLS1.1 and
2525 above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
2526 SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
2530 Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
2532 *) Check for potentially exploitable overflows in asn1_d2i_read_bio
2533 BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
2534 in CRYPTO_realloc_clean.
2536 Thanks to Tavis Ormandy, Google Security Team, for discovering this
2537 issue and to Adam Langley <agl@chromium.org> for fixing it.
2539 [Adam Langley (Google), Tavis Ormandy, Google Security Team]
2541 *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
2544 *) Workarounds for some broken servers that "hang" if a client hello
2545 record length exceeds 255 bytes.
2547 1. Do not use record version number > TLS 1.0 in initial client
2548 hello: some (but not all) hanging servers will now work.
2549 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
2550 the number of ciphers sent in the client hello. This should be
2551 set to an even number, such as 50, for example by passing:
2552 -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
2553 Most broken servers should now work.
2554 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
2555 TLS 1.2 client support entirely.
2558 *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
2561 Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
2563 *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
2564 STRING form instead of a DigestInfo.
2567 *) The format used for MDC2 RSA signatures is inconsistent between EVP
2568 and the RSA_sign/RSA_verify functions. This was made more apparent when
2569 OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
2570 those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
2571 the correct format in RSA_verify so both forms transparently work.
2574 *) Some servers which support TLS 1.0 can choke if we initially indicate
2575 support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
2576 encrypted premaster secret. As a workaround use the maximum permitted
2577 client version in client hello, this should keep such servers happy
2578 and still work with previous versions of OpenSSL.
2581 *) Add support for TLS/DTLS heartbeats.
2582 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2584 *) Add support for SCTP.
2585 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2587 *) Improved PRNG seeding for VOS.
2588 [Paul Green <Paul.Green@stratus.com>]
2590 *) Extensive assembler packs updates, most notably:
2592 - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
2593 - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
2594 - x86_64: bit-sliced AES implementation;
2595 - ARM: NEON support, contemporary platforms optimizations;
2596 - s390x: z196 support;
2597 - *: GHASH and GF(2^m) multiplication implementations;
2601 *) Make TLS-SRP code conformant with RFC 5054 API cleanup
2602 (removal of unnecessary code)
2603 [Peter Sylvester <peter.sylvester@edelweb.fr>]
2605 *) Add TLS key material exporter from RFC 5705.
2608 *) Add DTLS-SRTP negotiation from RFC 5764.
2611 *) Add Next Protocol Negotiation,
2612 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
2613 disabled with a no-npn flag to config or Configure. Code donated
2615 [Adam Langley <agl@google.com> and Ben Laurie]
2617 *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
2618 NIST-P256, NIST-P521, with constant-time single point multiplication on
2619 typical inputs. Compiler support for the nonstandard type __uint128_t is
2620 required to use this (present in gcc 4.4 and later, for 64-bit builds).
2621 Code made available under Apache License version 2.0.
2623 Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
2624 line to include this in your build of OpenSSL, and run "make depend" (or
2625 "make update"). This enables the following EC_METHODs:
2627 EC_GFp_nistp224_method()
2628 EC_GFp_nistp256_method()
2629 EC_GFp_nistp521_method()
2631 EC_GROUP_new_by_curve_name() will automatically use these (while
2632 EC_GROUP_new_curve_GFp() currently prefers the more flexible
2634 [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
2636 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
2637 all platforms. Move ssize_t definition from e_os.h to the public
2638 header file e_os2.h as it now appears in public header file cms.h
2641 *) New -sigopt option to the ca, req and x509 utilities. Additional
2642 signature parameters can be passed using this option and in
2646 *) Add RSA PSS signing function. This will generate and set the
2647 appropriate AlgorithmIdentifiers for PSS based on those in the
2648 corresponding EVP_MD_CTX structure. No application support yet.
2651 *) Support for companion algorithm specific ASN1 signing routines.
2652 New function ASN1_item_sign_ctx() signs a pre-initialised
2653 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
2654 the appropriate parameters.
2657 *) Add new algorithm specific ASN1 verification initialisation function
2658 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
2659 handling will be the same no matter what EVP_PKEY_METHOD is used.
2660 Add a PSS handler to support verification of PSS signatures: checked
2661 against a number of sample certificates.
2664 *) Add signature printing for PSS. Add PSS OIDs.
2665 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
2667 *) Add algorithm specific signature printing. An individual ASN1 method
2668 can now print out signatures instead of the standard hex dump.
2670 More complex signatures (e.g. PSS) can print out more meaningful
2671 information. Include DSA version that prints out the signature
2675 *) Password based recipient info support for CMS library: implementing
2679 *) Split password based encryption into PBES2 and PBKDF2 functions. This
2680 neatly separates the code into cipher and PBE sections and is required
2681 for some algorithms that split PBES2 into separate pieces (such as
2682 password based CMS).
2685 *) Session-handling fixes:
2686 - Fix handling of connections that are resuming with a session ID,
2687 but also support Session Tickets.
2688 - Fix a bug that suppressed issuing of a new ticket if the client
2689 presented a ticket with an expired session.
2690 - Try to set the ticket lifetime hint to something reasonable.
2691 - Make tickets shorter by excluding irrelevant information.
2692 - On the client side, don't ignore renewed tickets.
2693 [Adam Langley, Bodo Moeller (Google)]
2695 *) Fix PSK session representation.
2698 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
2700 This work was sponsored by Intel.
2703 *) Add GCM support to TLS library. Some custom code is needed to split
2704 the IV between the fixed (from PRF) and explicit (from TLS record)
2705 portions. This adds all GCM ciphersuites supported by RFC5288 and
2706 RFC5289. Generalise some AES* cipherstrings to include GCM and
2707 add a special AESGCM string for GCM only.
2710 *) Expand range of ctrls for AES GCM. Permit setting invocation
2711 field on decrypt and retrieval of invocation field only on encrypt.
2714 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
2715 As required by RFC5289 these ciphersuites cannot be used if for
2716 versions of TLS earlier than 1.2.
2719 *) For FIPS capable OpenSSL interpret a NULL default public key method
2720 as unset and return the appropriate default but do *not* set the default.
2721 This means we can return the appropriate method in applications that
2722 switch between FIPS and non-FIPS modes.
2725 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
2726 ENGINE is used then we cannot handle that in the FIPS module so we
2727 keep original code iff non-FIPS operations are allowed.
2730 *) Add -attime option to openssl utilities.
2731 [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
2733 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
2736 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
2737 FIPS EC methods unconditionally for now.
2740 *) New build option no-ec2m to disable characteristic 2 code.
2743 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
2744 all cases can be covered as some introduce binary incompatibilities.
2747 *) Redirect RSA operations to FIPS module including keygen,
2748 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
2751 *) Add similar low level API blocking to ciphers.
2754 *) Low level digest APIs are not approved in FIPS mode: any attempt
2755 to use these will cause a fatal error. Applications that *really* want
2756 to use them can use the private_* version instead.
2759 *) Redirect cipher operations to FIPS module for FIPS builds.
2762 *) Redirect digest operations to FIPS module for FIPS builds.
2765 *) Update build system to add "fips" flag which will link in fipscanister.o
2766 for static and shared library builds embedding a signature if needed.
2769 *) Output TLS supported curves in preference order instead of numerical
2770 order. This is currently hardcoded for the highest order curves first.
2771 This should be configurable so applications can judge speed vs strength.
2774 *) Add TLS v1.2 server support for client authentication.
2777 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
2781 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
2782 FIPS modules versions.
2785 *) Add TLS v1.2 client side support for client authentication. Keep cache
2786 of handshake records longer as we don't know the hash algorithm to use
2787 until after the certificate request message is received.
2790 *) Initial TLS v1.2 client support. Add a default signature algorithms
2791 extension including all the algorithms we support. Parse new signature
2792 format in client key exchange. Relax some ECC signing restrictions for
2793 TLS v1.2 as indicated in RFC5246.
2796 *) Add server support for TLS v1.2 signature algorithms extension. Switch
2797 to new signature format when needed using client digest preference.
2798 All server ciphersuites should now work correctly in TLS v1.2. No client
2799 support yet and no support for client certificates.
2802 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
2803 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
2804 ciphersuites. At present only RSA key exchange ciphersuites work with
2805 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
2806 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
2807 and version checking.
2810 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
2811 with this defined it will not be affected by any changes to ssl internal
2812 structures. Add several utility functions to allow openssl application
2813 to work with OPENSSL_NO_SSL_INTERN defined.
2817 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
2819 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
2822 *) Permit abbreviated handshakes when renegotiating using the function
2823 SSL_renegotiate_abbreviated().
2824 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2826 *) Add call to ENGINE_register_all_complete() to
2827 ENGINE_load_builtin_engines(), so some implementations get used
2828 automatically instead of needing explicit application support.
2831 *) Add support for TLS key exporter as described in RFC5705.
2832 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
2834 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
2835 a few changes are required:
2837 Add SSL_OP_NO_TLSv1_1 flag.
2838 Add TLSv1_1 methods.
2839 Update version checking logic to handle version 1.1.
2840 Add explicit IV handling (ported from DTLS code).
2841 Add command line options to s_client/s_server.
2844 Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
2846 *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
2847 in CMS and PKCS7 code. When RSA decryption fails use a random key for
2848 content decryption and always return the same error. Note: this attack
2849 needs on average 2^20 messages so it only affects automated senders. The
2850 old behaviour can be re-enabled in the CMS code by setting the
2851 CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
2852 an MMA defence is not necessary.
2853 Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
2854 this issue. (CVE-2012-0884)
2857 *) Fix CVE-2011-4619: make sure we really are receiving a
2858 client hello before rejecting multiple SGC restarts. Thanks to
2859 Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
2862 Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
2864 *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
2865 Thanks to Antonio Martin, Enterprise Secure Access Research and
2866 Development, Cisco Systems, Inc. for discovering this bug and
2867 preparing a fix. (CVE-2012-0050)
2870 Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
2872 *) Nadhem Alfardan and Kenny Paterson have discovered an extension
2873 of the Vaudenay padding oracle attack on CBC mode encryption
2874 which enables an efficient plaintext recovery attack against
2875 the OpenSSL implementation of DTLS. Their attack exploits timing
2876 differences arising during decryption processing. A research
2877 paper describing this attack can be found at:
2878 http://www.isg.rhul.ac.uk/~kp/dtls.pdf
2879 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2880 Security Group at Royal Holloway, University of London
2881 (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
2882 <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
2883 for preparing the fix. (CVE-2011-4108)
2884 [Robin Seggelmann, Michael Tuexen]
2886 *) Clear bytes used for block padding of SSL 3.0 records.
2888 [Adam Langley (Google)]
2890 *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
2891 Kadianakis <desnacked@gmail.com> for discovering this issue and
2892 Adam Langley for preparing the fix. (CVE-2011-4619)
2893 [Adam Langley (Google)]
2895 *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
2896 [Andrey Kulikov <amdeich@gmail.com>]
2898 *) Prevent malformed RFC3779 data triggering an assertion failure.
2899 Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
2900 and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
2901 [Rob Austein <sra@hactrn.net>]
2903 *) Improved PRNG seeding for VOS.
2904 [Paul Green <Paul.Green@stratus.com>]
2906 *) Fix ssl_ciph.c set-up race.
2907 [Adam Langley (Google)]
2909 *) Fix spurious failures in ecdsatest.c.
2910 [Emilia Käsper (Google)]
2912 *) Fix the BIO_f_buffer() implementation (which was mixing different
2913 interpretations of the '..._len' fields).
2914 [Adam Langley (Google)]
2916 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
2917 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
2918 threads won't reuse the same blinding coefficients.
2920 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
2921 lock to call BN_BLINDING_invert_ex, and avoids one use of
2922 BN_BLINDING_update for each BN_BLINDING structure (previously,
2923 the last update always remained unused).
2924 [Emilia Käsper (Google)]
2926 *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
2927 [Bob Buckholz (Google)]
2929 Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
2931 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
2932 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
2933 [Kaspar Brand <ossl@velox.ch>]
2935 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
2936 for multi-threaded use of ECDH. (CVE-2011-3210)
2937 [Adam Langley (Google)]
2939 *) Fix x509_name_ex_d2i memory leak on bad inputs.
2942 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
2943 signature public key algorithm by using OID xref utilities instead.
2944 Before this you could only use some ECC ciphersuites with SHA1 only.
2947 *) Add protection against ECDSA timing attacks as mentioned in the paper
2948 by Billy Bob Brumley and Nicola Tuveri, see:
2950 http://eprint.iacr.org/2011/232.pdf
2952 [Billy Bob Brumley and Nicola Tuveri]
2954 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
2956 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
2957 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
2959 *) Fix bug in string printing code: if *any* escaping is enabled we must
2960 escape the escape character (backslash) or the resulting string is
2964 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
2966 *) Disable code workaround for ancient and obsolete Netscape browsers
2967 and servers: an attacker can use it in a ciphersuite downgrade attack.
2968 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
2971 *) Fixed J-PAKE implementation error, originally discovered by
2972 Sebastien Martini, further info and confirmation from Stefan
2973 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
2976 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
2978 *) Fix extension code to avoid race conditions which can result in a buffer
2979 overrun vulnerability: resumed sessions must not be modified as they can
2980 be shared by multiple threads. CVE-2010-3864
2983 *) Fix WIN32 build system to correctly link an ENGINE directory into
2987 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
2989 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
2991 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
2993 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
2995 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
2996 context. The operation can be customised via the ctrl mechanism in
2997 case ENGINEs want to include additional functionality.
3000 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
3003 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
3004 output hashes compatible with older versions of OpenSSL.
3005 [Willy Weisz <weisz@vcpc.univie.ac.at>]
3007 *) Fix compression algorithm handling: if resuming a session use the
3008 compression algorithm of the resumed session instead of determining
3009 it from client hello again. Don't allow server to change algorithm.
3012 *) Add load_crls() function to apps tidying load_certs() too. Add option
3013 to verify utility to allow additional CRLs to be included.
3016 *) Update OCSP request code to permit adding custom headers to the request:
3017 some responders need this.
3020 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
3022 [Julia Lawall <julia@diku.dk>]
3024 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
3025 needlessly dereferenced structures, used obsolete functions and
3026 didn't handle all updated verify codes correctly.
3029 *) Disable MD2 in the default configuration.
3032 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
3033 indicate the initial BIO being pushed or popped. This makes it possible
3034 to determine whether the BIO is the one explicitly called or as a result
3035 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
3036 it handles reference counts correctly and doesn't zero out the I/O bio
3037 when it is not being explicitly popped. WARNING: applications which
3038 included workarounds for the old buggy behaviour will need to be modified
3039 or they could free up already freed BIOs.
3042 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
3043 renaming to all platforms (within the 0.9.8 branch, this was
3044 done conditionally on Netware platforms to avoid a name clash).
3045 [Guenter <lists@gknw.net>]
3047 *) Add ECDHE and PSK support to DTLS.
3048 [Michael Tuexen <tuexen@fh-muenster.de>]
3050 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
3054 *) Add "missing" function EVP_MD_flags() (without this the only way to
3055 retrieve a digest flags is by accessing the structure directly. Update
3056 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
3057 or cipher is registered as in the "from" argument. Print out all
3058 registered digests in the dgst usage message instead of manually
3059 attempting to work them out.
3062 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
3063 this allows the use of compression and extensions. Change default cipher
3064 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
3065 by default unless an application cipher string requests it.
3068 *) Alter match criteria in PKCS12_parse(). It used to try to use local
3069 key ids to find matching certificates and keys but some PKCS#12 files
3070 don't follow the (somewhat unwritten) rules and this strategy fails.
3071 Now just gather all certificates together and the first private key
3072 then look for the first certificate that matches the key.
3075 *) Support use of registered digest and cipher names for dgst and cipher
3076 commands instead of having to add each one as a special case. So now
3083 openssl dgst -sha256 foo
3085 and this works for ENGINE based algorithms too.
3089 *) Update Gost ENGINE to support parameter files.
3090 [Victor B. Wagner <vitus@cryptocom.ru>]
3092 *) Support GeneralizedTime in ca utility.
3093 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
3095 *) Enhance the hash format used for certificate directory links. The new
3096 form uses the canonical encoding (meaning equivalent names will work
3097 even if they aren't identical) and uses SHA1 instead of MD5. This form
3098 is incompatible with the older format and as a result c_rehash should
3099 be used to rebuild symbolic links.
3102 *) Make PKCS#8 the default write format for private keys, replacing the
3103 traditional format. This form is standardised, more secure and doesn't
3104 include an implicit MD5 dependency.
3107 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
3108 committed to OpenSSL should pass this lot as a minimum.
3111 *) Add session ticket override functionality for use by EAP-FAST.
3112 [Jouni Malinen <j@w1.fi>]
3114 *) Modify HMAC functions to return a value. Since these can be implemented
3115 in an ENGINE errors can occur.
3118 *) Type-checked OBJ_bsearch_ex.
3121 *) Type-checked OBJ_bsearch. Also some constification necessitated
3122 by type-checking. Still to come: TXT_DB, bsearch(?),
3123 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
3127 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
3128 seconds to a tm structure directly, instead of going through OS
3129 specific date routines. This avoids any issues with OS routines such
3130 as the year 2038 bug. New *_adj() functions for ASN1 time structures
3131 and X509_time_adj_ex() to cover the extended range. The existing
3132 X509_time_adj() is still usable and will no longer have any date issues.
3135 *) Delta CRL support. New use deltas option which will attempt to locate
3136 and search any appropriate delta CRLs available.
3138 This work was sponsored by Google.
3141 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
3142 code and add additional score elements. Validate alternate CRL paths
3143 as part of the CRL checking and indicate a new error "CRL path validation
3144 error" in this case. Applications wanting additional details can use
3145 the verify callback and check the new "parent" field. If this is not
3146 NULL CRL path validation is taking place. Existing applications won't
3147 see this because it requires extended CRL support which is off by
3150 This work was sponsored by Google.
3153 *) Support for freshest CRL extension.
3155 This work was sponsored by Google.
3158 *) Initial indirect CRL support. Currently only supported in the CRLs
3159 passed directly and not via lookup. Process certificate issuer
3160 CRL entry extension and lookup CRL entries by bother issuer name
3161 and serial number. Check and process CRL issuer entry in IDP extension.
3163 This work was sponsored by Google.
3166 *) Add support for distinct certificate and CRL paths. The CRL issuer
3167 certificate is validated separately in this case. Only enabled if
3168 an extended CRL support flag is set: this flag will enable additional
3169 CRL functionality in future.
3171 This work was sponsored by Google.
3174 *) Add support for policy mappings extension.
3176 This work was sponsored by Google.
3179 *) Fixes to pathlength constraint, self issued certificate handling,
3180 policy processing to align with RFC3280 and PKITS tests.
3182 This work was sponsored by Google.
3185 *) Support for name constraints certificate extension. DN, email, DNS
3186 and URI types are currently supported.
3188 This work was sponsored by Google.
3191 *) To cater for systems that provide a pointer-based thread ID rather
3192 than numeric, deprecate the current numeric thread ID mechanism and
3193 replace it with a structure and associated callback type. This
3194 mechanism allows a numeric "hash" to be extracted from a thread ID in
3195 either case, and on platforms where pointers are larger than 'long',
3196 mixing is done to help ensure the numeric 'hash' is usable even if it
3197 can't be guaranteed unique. The default mechanism is to use "&errno"
3198 as a pointer-based thread ID to distinguish between threads.
3200 Applications that want to provide their own thread IDs should now use
3201 CRYPTO_THREADID_set_callback() to register a callback that will call
3202 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
3204 Note that ERR_remove_state() is now deprecated, because it is tied
3205 to the assumption that thread IDs are numeric. ERR_remove_state(0)
3206 to free the current thread's error state should be replaced by
3207 ERR_remove_thread_state(NULL).
3209 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
3210 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
3211 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
3212 application was previously providing a numeric thread callback that
3213 was inappropriate for distinguishing threads, then uniqueness might
3214 have been obtained with &errno that happened immediately in the
3215 intermediate development versions of OpenSSL; this is no longer the
3216 case, the numeric thread callback will now override the automatic use
3218 [Geoff Thorpe, with help from Bodo Moeller]
3220 *) Initial support for different CRL issuing certificates. This covers a
3221 simple case where the self issued certificates in the chain exist and
3222 the real CRL issuer is higher in the existing chain.
3224 This work was sponsored by Google.
3227 *) Removed effectively defunct crypto/store from the build.
3230 *) Revamp of STACK to provide stronger type-checking. Still to come:
3231 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
3232 ASN1_STRING, CONF_VALUE.
3235 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
3236 RAM on SSL connections. This option can save about 34k per idle SSL.
3239 *) Revamp of LHASH to provide stronger type-checking. Still to come:
3240 STACK, TXT_DB, bsearch, qsort.
3243 *) Initial support for Cryptographic Message Syntax (aka CMS) based
3244 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
3245 support for data, signedData, compressedData, digestedData and
3246 encryptedData, envelopedData types included. Scripts to check against
3247 RFC4134 examples draft and interop and consistency checks of many
3248 content types and variants.
3251 *) Add options to enc utility to support use of zlib compression BIO.
3254 *) Extend mk1mf to support importing of options and assembly language
3255 files from Configure script, currently only included in VC-WIN32.
3256 The assembly language rules can now optionally generate the source
3257 files from the associated perl scripts.
3260 *) Implement remaining functionality needed to support GOST ciphersuites.
3261 Interop testing has been performed using CryptoPro implementations.
3262 [Victor B. Wagner <vitus@cryptocom.ru>]
3264 *) s390x assembler pack.
3267 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
3271 *) Implement Opaque PRF Input TLS extension as specified in
3272 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
3273 official specification yet and no extension type assignment by
3274 IANA exists, this extension (for now) will have to be explicitly
3275 enabled when building OpenSSL by providing the extension number
3276 to use. For example, specify an option
3278 -DTLSEXT_TYPE_opaque_prf_input=0x9527
3280 to the "config" or "Configure" script to enable the extension,
3281 assuming extension number 0x9527 (which is a completely arbitrary
3282 and unofficial assignment based on the MD5 hash of the Internet
3283 Draft). Note that by doing so, you potentially lose
3284 interoperability with other TLS implementations since these might
3285 be using the same extension number for other purposes.
3287 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
3288 opaque PRF input value to use in the handshake. This will create
3289 an interal copy of the length-'len' string at 'src', and will
3290 return non-zero for success.
3292 To get more control and flexibility, provide a callback function
3295 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
3296 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
3300 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
3303 Callback function 'cb' will be called in handshakes, and is
3304 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
3305 Argument 'arg' is for application purposes (the value as given to
3306 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
3307 be provided to the callback function). The callback function
3308 has to return non-zero to report success: usually 1 to use opaque
3309 PRF input just if possible, or 2 to enforce use of the opaque PRF
3310 input. In the latter case, the library will abort the handshake
3311 if opaque PRF input is not successfully negotiated.
3313 Arguments 'peerinput' and 'len' given to the callback function
3314 will always be NULL and 0 in the case of a client. A server will
3315 see the client's opaque PRF input through these variables if
3316 available (NULL and 0 otherwise). Note that if the server
3317 provides an opaque PRF input, the length must be the same as the
3318 length of the client's opaque PRF input.
3320 Note that the callback function will only be called when creating
3321 a new session (session resumption can resume whatever was
3322 previously negotiated), and will not be called in SSL 2.0
3323 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
3324 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
3325 for applications that need to enforce opaque PRF input.
3329 *) Update ssl code to support digests other than SHA1+MD5 for handshake
3332 [Victor B. Wagner <vitus@cryptocom.ru>]
3334 *) Add RFC4507 support to OpenSSL. This includes the corrections in
3335 RFC4507bis. The encrypted ticket format is an encrypted encoded
3336 SSL_SESSION structure, that way new session features are automatically
3339 If a client application caches session in an SSL_SESSION structure
3340 support is transparent because tickets are now stored in the encoded
3343 The SSL_CTX structure automatically generates keys for ticket
3344 protection in servers so again support should be possible
3345 with no application modification.
3347 If a client or server wishes to disable RFC4507 support then the option
3348 SSL_OP_NO_TICKET can be set.
3350 Add a TLS extension debugging callback to allow the contents of any client
3351 or server extensions to be examined.
3353 This work was sponsored by Google.
3356 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
3357 OpenSSL should now compile cleanly on gcc 4.2
3358 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
3360 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
3361 support including streaming MAC support: this is required for GOST
3362 ciphersuite support.
3363 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
3365 *) Add option -stream to use PKCS#7 streaming in smime utility. New
3366 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
3367 to output in BER and PEM format.
3370 *) Experimental support for use of HMAC via EVP_PKEY interface. This
3371 allows HMAC to be handled via the EVP_DigestSign*() interface. The
3372 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
3373 ENGINE support for HMAC keys which are unextractable. New -mac and
3374 -macopt options to dgst utility.
3377 *) New option -sigopt to dgst utility. Update dgst to use
3378 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
3379 alternative signing parameters such as X9.31 or PSS in the dgst
3383 *) Change ssl_cipher_apply_rule(), the internal function that does
3384 the work each time a ciphersuite string requests enabling
3385 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
3386 removing ("!foo+bar") a class of ciphersuites: Now it maintains
3387 the order of disabled ciphersuites such that those ciphersuites
3388 that most recently went from enabled to disabled not only stay
3389 in order with respect to each other, but also have higher priority
3390 than other disabled ciphersuites the next time ciphersuites are
3393 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
3394 the same ciphersuites as with "HIGH" alone, but in a specific
3395 order where the PSK ciphersuites come first (since they are the
3396 most recently disabled ciphersuites when "HIGH" is parsed).
3398 Also, change ssl_create_cipher_list() (using this new
3399 funcionality) such that between otherwise identical
3400 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
3404 *) Change ssl_create_cipher_list() so that it automatically
3405 arranges the ciphersuites in reasonable order before starting
3406 to process the rule string. Thus, the definition for "DEFAULT"
3407 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
3408 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
3409 This makes it much easier to arrive at a reasonable default order
3410 in applications for which anonymous ciphers are OK (meaning
3411 that you can't actually use DEFAULT).
3412 [Bodo Moeller; suggested by Victor Duchovni]
3414 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
3415 processing) into multiple integers instead of setting
3416 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
3417 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
3418 (These masks as well as the individual bit definitions are hidden
3419 away into the non-exported interface ssl/ssl_locl.h, so this
3420 change to the definition of the SSL_CIPHER structure shouldn't
3421 affect applications.) This give us more bits for each of these
3422 categories, so there is no longer a need to coagulate AES128 and
3423 AES256 into a single algorithm bit, and to coagulate Camellia128
3424 and Camellia256 into a single algorithm bit, which has led to all
3427 Thus, among other things, the kludge introduced in 0.9.7m and
3428 0.9.8e for masking out AES256 independently of AES128 or masking
3429 out Camellia256 independently of AES256 is not needed here in 0.9.9.
3431 With the change, we also introduce new ciphersuite aliases that
3432 so far were missing: "AES128", "AES256", "CAMELLIA128", and
3436 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
3437 Use the leftmost N bytes of the signature input if the input is
3438 larger than the prime q (with N being the size in bytes of q).
3441 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
3442 it yet and it is largely untested.
3445 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
3448 *) Initial incomplete changes to avoid need for function casts in OpenSSL
3449 some compilers (gcc 4.2 and later) reject their use. Safestack is
3450 reimplemented. Update ASN1 to avoid use of legacy functions.
3453 *) Win32/64 targets are linked with Winsock2.
3456 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
3457 to external functions. This can be used to increase CRL handling
3458 efficiency especially when CRLs are very large by (for example) storing
3459 the CRL revoked certificates in a database.
3462 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
3463 new CRLs added to a directory can be used. New command line option
3464 -verify_return_error to s_client and s_server. This causes real errors
3465 to be returned by the verify callback instead of carrying on no matter
3466 what. This reflects the way a "real world" verify callback would behave.
3469 *) GOST engine, supporting several GOST algorithms and public key formats.
3470 Kindly donated by Cryptocom.
3473 *) Partial support for Issuing Distribution Point CRL extension. CRLs
3474 partitioned by DP are handled but no indirect CRL or reason partitioning
3475 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
3476 selected via a scoring technique which handles IDP and AKID in CRLs.
3479 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
3480 will ultimately be used for all verify operations: this will remove the
3481 X509_STORE dependency on certificate verification and allow alternative
3482 lookup methods. X509_STORE based implementations of these two callbacks.
3485 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
3486 Modify get_crl() to find a valid (unexpired) CRL if possible.
3489 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
3490 this would be called X509_CRL_cmp() but that name is already used by
3491 a function that just compares CRL issuer names. Cache several CRL
3492 extensions in X509_CRL structure and cache CRLDP in X509.
3495 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
3496 this maps equivalent X509_NAME structures into a consistent structure.
3497 Name comparison can then be performed rapidly using memcmp().
3500 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
3504 *) Allow digests to supply their own micalg string for S/MIME type using
3505 the ctrl EVP_MD_CTRL_MICALG.
3508 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
3509 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
3510 ctrl. It can then customise the structure before and/or after signing
3514 *) New function OBJ_add_sigid() to allow application defined signature OIDs
3515 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
3516 to free up any added signature OIDs.
3519 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
3520 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
3521 digest and cipher tables. New options added to openssl utility:
3522 list-message-digest-algorithms and list-cipher-algorithms.
3525 *) Change the array representation of binary polynomials: the list
3526 of degrees of non-zero coefficients is now terminated with -1.
3527 Previously it was terminated with 0, which was also part of the
3528 value; thus, the array representation was not applicable to
3529 polynomials where t^0 has coefficient zero. This change makes
3530 the array representation useful in a more general context.
3533 *) Various modifications and fixes to SSL/TLS cipher string
3534 handling. For ECC, the code now distinguishes between fixed ECDH
3535 with RSA certificates on the one hand and with ECDSA certificates
3536 on the other hand, since these are separate ciphersuites. The
3537 unused code for Fortezza ciphersuites has been removed.
3539 For consistency with EDH, ephemeral ECDH is now called "EECDH"
3540 (not "ECDHE"). For consistency with the code for DH
3541 certificates, use of ECDH certificates is now considered ECDH
3542 authentication, not RSA or ECDSA authentication (the latter is
3543 merely the CA's signing algorithm and not actively used in the
3546 The temporary ciphersuite alias "ECCdraft" is no longer
3547 available, and ECC ciphersuites are no longer excluded from "ALL"
3548 and "DEFAULT". The following aliases now exist for RFC 4492
3549 ciphersuites, most of these by analogy with the DH case:
3551 kECDHr - ECDH cert, signed with RSA
3552 kECDHe - ECDH cert, signed with ECDSA
3553 kECDH - ECDH cert (signed with either RSA or ECDSA)
3554 kEECDH - ephemeral ECDH
3555 ECDH - ECDH cert or ephemeral ECDH
3561 AECDH - anonymous ECDH
3562 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
3566 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
3567 Use correct micalg parameters depending on digest(s) in signed message.
3570 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
3571 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
3574 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
3575 an engine to register a method. Add ENGINE lookups for methods and
3576 functional reference processing.
3579 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
3580 EVP_{Sign,Verify}* which allow an application to customise the signature
3584 *) New -resign option to smime utility. This adds one or more signers
3585 to an existing PKCS#7 signedData structure. Also -md option to use an
3586 alternative message digest algorithm for signing.
3589 *) Tidy up PKCS#7 routines and add new functions to make it easier to
3590 create PKCS7 structures containing multiple signers. Update smime
3591 application to support multiple signers.
3594 *) New -macalg option to pkcs12 utility to allow setting of an alternative
3598 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
3599 Reorganize PBE internals to lookup from a static table using NIDs,
3600 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
3601 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
3602 PRF which will be automatically used with PBES2.
3605 *) Replace the algorithm specific calls to generate keys in "req" with the
3609 *) Update PKCS#7 enveloped data routines to use new API. This is now
3610 supported by any public key method supporting the encrypt operation. A
3611 ctrl is added to allow the public key algorithm to examine or modify
3612 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
3616 *) Add a ctrl to asn1 method to allow a public key algorithm to express
3617 a default digest type to use. In most cases this will be SHA1 but some
3618 algorithms (such as GOST) need to specify an alternative digest. The
3619 return value indicates how strong the preference is 1 means optional and
3620 2 is mandatory (that is it is the only supported type). Modify
3621 ASN1_item_sign() to accept a NULL digest argument to indicate it should
3622 use the default md. Update openssl utilities to use the default digest
3623 type for signing if it is not explicitly indicated.
3626 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
3627 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
3628 signing method from the key type. This effectively removes the link
3629 between digests and public key types.
3632 *) Add an OID cross reference table and utility functions. Its purpose is to
3633 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
3634 rsaEncryption. This will allow some of the algorithm specific hackery
3635 needed to use the correct OID to be removed.
3638 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
3639 structures for PKCS7_sign(). They are now set up by the relevant public
3643 *) Add provisional EC pkey method with support for ECDSA and ECDH.
3646 *) Add support for key derivation (agreement) in the API, DH method and
3650 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
3651 public and private key formats. As a side effect these add additional
3652 command line functionality not previously available: DSA signatures can be
3653 generated and verified using pkeyutl and DH key support and generation in
3658 [Oliver Tappe <zooey@hirschkaefer.de>]
3660 *) New make target "install_html_docs" installs HTML renditions of the
3662 [Oliver Tappe <zooey@hirschkaefer.de>]
3664 *) New utility "genpkey" this is analogous to "genrsa" etc except it can
3665 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
3666 support key and parameter generation and add initial key generation
3667 functionality for RSA.
3670 *) Add functions for main EVP_PKEY_method operations. The undocumented
3671 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
3672 EVP_PKEY_{encrypt,decrypt}_old.
3675 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
3676 key API, doesn't do much yet.
3679 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
3680 public key algorithms. New option to openssl utility:
3681 "list-public-key-algorithms" to print out info.
3684 *) Implement the Supported Elliptic Curves Extension for
3685 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3688 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
3689 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
3692 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
3693 utilities such as rsa, dsa, dsaparam etc except they process any key
3697 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
3698 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
3699 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
3703 *) Initial support for pluggable public key ASN1.
3704 De-spaghettify the public key ASN1 handling. Move public and private
3705 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
3706 algorithm specific handling to a single module within the relevant
3707 algorithm directory. Add functions to allow (near) opaque processing
3708 of public and private key structures.
3711 *) Implement the Supported Point Formats Extension for
3712 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3715 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
3716 for the psk identity [hint] and the psk callback functions to the
3717 SSL_SESSION, SSL and SSL_CTX structure.
3720 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
3724 SSL_CTX_use_psk_identity_hint
3725 SSL_get_psk_identity_hint
3726 SSL_get_psk_identity
3727 SSL_use_psk_identity_hint
3729 [Mika Kousa and Pasi Eronen of Nokia Corporation]
3731 *) Add RFC 3161 compliant time stamp request creation, response generation
3732 and response verification functionality.
3733 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
3735 *) Add initial support for TLS extensions, specifically for the server_name
3736 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
3737 have new members for a host name. The SSL data structure has an
3738 additional member SSL_CTX *initial_ctx so that new sessions can be
3739 stored in that context to allow for session resumption, even after the
3740 SSL has been switched to a new SSL_CTX in reaction to a client's
3741 server_name extension.
3743 New functions (subject to change):
3745 SSL_get_servername()
3746 SSL_get_servername_type()
3749 New CTRL codes and macros (subject to change):
3751 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
3752 - SSL_CTX_set_tlsext_servername_callback()
3753 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
3754 - SSL_CTX_set_tlsext_servername_arg()
3755 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
3757 openssl s_client has a new '-servername ...' option.
3759 openssl s_server has new options '-servername_host ...', '-cert2 ...',
3760 '-key2 ...', '-servername_fatal' (subject to change). This allows
3761 testing the HostName extension for a specific single host name ('-cert'
3762 and '-key' remain fallbacks for handshakes without HostName
3763 negotiation). If the unrecognized_name alert has to be sent, this by
3764 default is a warning; it becomes fatal with the '-servername_fatal'
3767 [Peter Sylvester, Remy Allais, Christophe Renou]
3769 *) Whirlpool hash implementation is added.
3772 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
3773 bn(64,32). Because of instruction set limitations it doesn't have
3774 any negative impact on performance. This was done mostly in order
3775 to make it possible to share assembler modules, such as bn_mul_mont
3776 implementations, between 32- and 64-bit builds without hassle.
3779 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
3780 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
3784 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
3785 dedicated Montgomery multiplication procedure, is introduced.
3786 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
3787 "64-bit" performance on certain 32-bit targets.
3790 *) New option SSL_OP_NO_COMP to disable use of compression selectively
3791 in SSL structures. New SSL ctrl to set maximum send fragment size.
3792 Save memory by seeting the I/O buffer sizes dynamically instead of
3793 using the maximum available value.
3796 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
3797 in addition to the text details.
3800 *) Very, very preliminary EXPERIMENTAL support for printing of general
3801 ASN1 structures. This currently produces rather ugly output and doesn't
3802 handle several customised structures at all.
3805 *) Integrated support for PVK file format and some related formats such
3806 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
3807 these in the 'rsa' and 'dsa' utilities.
3810 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
3813 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
3814 place for the (very old) "NETSCAPE" format certificates which are now
3815 handled using new ASN1 code equivalents.
3818 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
3819 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
3820 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
3823 *) Modify CRL distribution points extension code to print out previously
3824 unsupported fields. Enhance extension setting code to allow setting of
3828 *) Add print and set support for Issuing Distribution Point CRL extension.
3831 *) Change 'Configure' script to enable Camellia by default.
3834 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
3836 *) When rejecting SSL/TLS records due to an incorrect version number, never
3837 update s->server with a new major version number. As of
3838 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
3839 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
3840 the previous behavior could result in a read attempt at NULL when
3841 receiving specific incorrect SSL/TLS records once record payload
3842 protection is active. (CVE-2010-0740)
3843 [Bodo Moeller, Adam Langley <agl@chromium.org>]
3845 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
3846 could be crashed if the relevant tables were not present (e.g. chrooted).
3847 [Tomas Hoger <thoger@redhat.com>]
3849 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
3851 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
3852 [Martin Olsson, Neel Mehta]
3854 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
3855 accommodate for stack sorting, always a write lock!).
3858 *) On some versions of WIN32 Heap32Next is very slow. This can cause
3859 excessive delays in the RAND_poll(): over a minute. As a workaround
3860 include a time check in the inner Heap32Next loop too.
3863 *) The code that handled flushing of data in SSL/TLS originally used the
3864 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
3865 the problem outlined in PR#1949. The fix suggested there however can
3866 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
3867 of Apache). So instead simplify the code to flush unconditionally.
3868 This should be fine since flushing with no data to flush is a no op.
3871 *) Handle TLS versions 2.0 and later properly and correctly use the
3872 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
3873 off ancient servers have a habit of sticking around for a while...
3876 *) Modify compression code so it frees up structures without using the
3877 ex_data callbacks. This works around a problem where some applications
3878 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
3879 restarting) then use compression (e.g. SSL with compression) later.
3880 This results in significant per-connection memory leaks and
3881 has caused some security issues including CVE-2008-1678 and
3885 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
3886 change when encrypting or decrypting.
3889 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
3890 connect and renegotiate with servers which do not support RI.
3891 Until RI is more widely deployed this option is enabled by default.
3894 *) Add "missing" ssl ctrls to clear options and mode.
3897 *) If client attempts to renegotiate and doesn't support RI respond with
3898 a no_renegotiation alert as required by RFC5746. Some renegotiating
3899 TLS clients will continue a connection gracefully when they receive
3900 the alert. Unfortunately OpenSSL mishandled this alert and would hang
3901 waiting for a server hello which it will never receive. Now we treat a
3902 received no_renegotiation alert as a fatal error. This is because
3903 applications requesting a renegotiation might well expect it to succeed
3904 and would have no code in place to handle the server denying it so the
3905 only safe thing to do is to terminate the connection.
3908 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
3909 peer supports secure renegotiation and 0 otherwise. Print out peer
3910 renegotiation support in s_client/s_server.
3913 *) Replace the highly broken and deprecated SPKAC certification method with
3914 the updated NID creation version. This should correctly handle UTF8.
3917 *) Implement RFC5746. Re-enable renegotiation but require the extension
3918 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
3919 turns out to be a bad idea. It has been replaced by
3920 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
3921 SSL_CTX_set_options(). This is really not recommended unless you
3922 know what you are doing.
3923 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
3925 *) Fixes to stateless session resumption handling. Use initial_ctx when
3926 issuing and attempting to decrypt tickets in case it has changed during
3927 servername handling. Use a non-zero length session ID when attempting
3928 stateless session resumption: this makes it possible to determine if
3929 a resumption has occurred immediately after receiving server hello
3930 (several places in OpenSSL subtly assume this) instead of later in
3934 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
3935 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
3936 fixes for a few places where the return code is not checked
3938 [Julia Lawall <julia@diku.dk>]
3940 *) Add --strict-warnings option to Configure script to include devteam
3941 warnings in other configurations.
3944 *) Add support for --libdir option and LIBDIR variable in makefiles. This
3945 makes it possible to install openssl libraries in locations which
3946 have names other than "lib", for example "/usr/lib64" which some
3948 [Steve Henson, based on patch from Jeremy Utley]
3950 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
3951 X690 8.9.12 and can produce some misleading textual output of OIDs.
3952 [Steve Henson, reported by Dan Kaminsky]
3954 *) Delete MD2 from algorithm tables. This follows the recommendation in
3955 several standards that it is not used in new applications due to
3956 several cryptographic weaknesses. For binary compatibility reasons
3957 the MD2 API is still compiled in by default.
3960 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
3964 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
3965 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
3967 [Guenter <lists@gknw.net>]
3969 *) Fix the server certificate chain building code to use X509_verify_cert(),
3970 it used to have an ad-hoc builder which was unable to cope with anything
3971 other than a simple chain.
3972 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
3974 *) Don't check self signed certificate signatures in X509_verify_cert()
3975 by default (a flag can override this): it just wastes time without
3976 adding any security. As a useful side effect self signed root CAs
3977 with non-FIPS digests are now usable in FIPS mode.
3980 *) In dtls1_process_out_of_seq_message() the check if the current message
3981 is already buffered was missing. For every new message was memory
3982 allocated, allowing an attacker to perform an denial of service attack
3983 with sending out of seq handshake messages until there is no memory
3984 left. Additionally every future messege was buffered, even if the
3985 sequence number made no sense and would be part of another handshake.
3986 So only messages with sequence numbers less than 10 in advance will be
3987 buffered. (CVE-2009-1378)
3988 [Robin Seggelmann, discovered by Daniel Mentz]
3990 *) Records are buffered if they arrive with a future epoch to be
3991 processed after finishing the corresponding handshake. There is
3992 currently no limitation to this buffer allowing an attacker to perform
3993 a DOS attack with sending records with future epochs until there is no
3994 memory left. This patch adds the pqueue_size() function to determine
3995 the size of a buffer and limits the record buffer to 100 entries.
3997 [Robin Seggelmann, discovered by Daniel Mentz]
3999 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
4000 parent structure is freed. (CVE-2009-1379)
4003 *) Handle non-blocking I/O properly in SSL_shutdown() call.
4004 [Darryl Miles <darryl-mailinglists@netbauds.net>]
4007 [Ilya O. <vrghost@gmail.com>]
4009 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
4011 *) Disable renegotiation completely - this fixes a severe security
4012 problem (CVE-2009-3555) at the cost of breaking all
4013 renegotiation. Renegotiation can be re-enabled by setting
4014 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
4015 run-time. This is really not recommended unless you know what
4019 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
4021 *) Don't set val to NULL when freeing up structures, it is freed up by
4022 underlying code. If sizeof(void *) > sizeof(long) this can result in
4023 zeroing past the valid field. (CVE-2009-0789)
4024 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
4026 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
4027 checked correctly. This would allow some invalid signed attributes to
4028 appear to verify correctly. (CVE-2009-0591)
4029 [Ivan Nestlerode <inestlerode@us.ibm.com>]
4031 *) Reject UniversalString and BMPString types with invalid lengths. This
4032 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
4033 a legal length. (CVE-2009-0590)
4036 *) Set S/MIME signing as the default purpose rather than setting it
4037 unconditionally. This allows applications to override it at the store
4041 *) Permit restricted recursion of ASN1 strings. This is needed in practice
4042 to handle some structures.
4045 *) Improve efficiency of mem_gets: don't search whole buffer each time
4047 [Jeremy Shapiro <jnshapir@us.ibm.com>]
4049 *) New -hex option for openssl rand.
4052 *) Print out UTF8String and NumericString when parsing ASN1.
4055 *) Support NumericString type for name components.
4058 *) Allow CC in the environment to override the automatically chosen
4059 compiler. Note that nothing is done to ensure flags work with the
4063 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
4065 *) Properly check EVP_VerifyFinal() and similar return values
4067 [Ben Laurie, Bodo Moeller, Google Security Team]
4069 *) Enable TLS extensions by default.
4072 *) Allow the CHIL engine to be loaded, whether the application is
4073 multithreaded or not. (This does not release the developer from the
4074 obligation to set up the dynamic locking callbacks.)
4075 [Sander Temme <sander@temme.net>]
4077 *) Use correct exit code if there is an error in dgst command.
4078 [Steve Henson; problem pointed out by Roland Dirlewanger]
4080 *) Tweak Configure so that you need to say "experimental-jpake" to enable
4081 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
4084 *) Add experimental JPAKE support, including demo authentication in
4085 s_client and s_server.
4088 *) Set the comparison function in v3_addr_canonize().
4089 [Rob Austein <sra@hactrn.net>]
4091 *) Add support for XMPP STARTTLS in s_client.
4092 [Philip Paeps <philip@freebsd.org>]
4094 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
4095 to ensure that even with this option, only ciphersuites in the
4096 server's preference list will be accepted. (Note that the option
4097 applies only when resuming a session, so the earlier behavior was
4098 just about the algorithm choice for symmetric cryptography.)
4101 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
4103 *) Fix NULL pointer dereference if a DTLS server received
4104 ChangeCipherSpec as first record (CVE-2009-1386).
4107 *) Fix a state transition in s3_srvr.c and d1_srvr.c
4108 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
4111 *) The fix in 0.9.8c that supposedly got rid of unsafe
4112 double-checked locking was incomplete for RSA blinding,
4113 addressing just one layer of what turns out to have been
4114 doubly unsafe triple-checked locking.
4116 So now fix this for real by retiring the MONT_HELPER macro
4117 in crypto/rsa/rsa_eay.c.
4119 [Bodo Moeller; problem pointed out by Marius Schilder]
4121 *) Various precautionary measures:
4123 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
4125 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
4126 (NB: This would require knowledge of the secret session ticket key
4127 to exploit, in which case you'd be SOL either way.)
4129 - Change bn_nist.c so that it will properly handle input BIGNUMs
4130 outside the expected range.
4132 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
4135 [Neel Mehta, Bodo Moeller]
4137 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
4138 the load fails. Useful for distros.
4139 [Ben Laurie and the FreeBSD team]
4141 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
4144 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
4147 *) Expand ENGINE to support engine supplied SSL client certificate functions.
4149 This work was sponsored by Logica.
4152 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
4153 keystores. Support for SSL/TLS client authentication too.
4154 Not compiled unless enable-capieng specified to Configure.
4156 This work was sponsored by Logica.
4159 *) Fix bug in X509_ATTRIBUTE creation: don't set attribute using
4160 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
4161 attribute creation routines such as certificate requests and PKCS#12
4165 Changes between 0.9.8g and 0.9.8h [28 May 2008]
4167 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
4168 handshake which could lead to a cilent crash as found using the
4169 Codenomicon TLS test suite (CVE-2008-1672)
4170 [Steve Henson, Mark Cox]
4172 *) Fix double free in TLS server name extensions which could lead to
4173 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
4176 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
4178 Clear the error queue to ensure that error entries left from
4179 older function calls do not interfere with the correct operation.
4180 [Lutz Jaenicke, Erik de Castro Lopo]
4182 *) Remove root CA certificates of commercial CAs:
4184 The OpenSSL project does not recommend any specific CA and does not
4185 have any policy with respect to including or excluding any CA.
4186 Therefore it does not make any sense to ship an arbitrary selection
4187 of root CA certificates with the OpenSSL software.
4190 *) RSA OAEP patches to fix two separate invalid memory reads.
4191 The first one involves inputs when 'lzero' is greater than
4192 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
4193 before the beginning of from). The second one involves inputs where
4194 the 'db' section contains nothing but zeroes (there is a one-byte
4195 invalid read after the end of 'db').
4196 [Ivan Nestlerode <inestlerode@us.ibm.com>]
4198 *) Partial backport from 0.9.9-dev:
4200 Introduce bn_mul_mont (dedicated Montgomery multiplication
4201 procedure) as a candidate for BIGNUM assembler implementation.
4202 While 0.9.9-dev uses assembler for various architectures, only
4203 x86_64 is available by default here in the 0.9.8 branch, and
4204 32-bit x86 is available through a compile-time setting.
4206 To try the 32-bit x86 assembler implementation, use Configure
4207 option "enable-montasm" (which exists only for this backport).
4209 As "enable-montasm" for 32-bit x86 disclaims code stability
4210 anyway, in this constellation we activate additional code
4211 backported from 0.9.9-dev for further performance improvements,
4212 namely BN_from_montgomery_word. (To enable this otherwise,
4213 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
4215 [Andy Polyakov (backport partially by Bodo Moeller)]
4217 *) Add TLS session ticket callback. This allows an application to set
4218 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
4219 values. This is useful for key rollover for example where several key
4220 sets may exist with different names.
4223 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
4224 This was broken until now in 0.9.8 releases, such that the only way
4225 a registered ENGINE could be used (assuming it initialises
4226 successfully on the host) was to explicitly set it as the default
4227 for the relevant algorithms. This is in contradiction with 0.9.7
4228 behaviour and the documentation. With this fix, when an ENGINE is
4229 registered into a given algorithm's table of implementations, the
4230 'uptodate' flag is reset so that auto-discovery will be used next
4231 time a new context for that algorithm attempts to select an
4233 [Ian Lister (tweaked by Geoff Thorpe)]
4235 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
4236 implementation in the following ways:
4238 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
4241 Lack of BER streaming support means one pass streaming processing is
4242 only supported if data is detached: setting the streaming flag is
4243 ignored for embedded content.
4245 CMS support is disabled by default and must be explicitly enabled
4246 with the enable-cms configuration option.
4249 *) Update the GMP engine glue to do direct copies between BIGNUM and
4250 mpz_t when openssl and GMP use the same limb size. Otherwise the
4251 existing "conversion via a text string export" trick is still used.
4252 [Paul Sheer <paulsheer@gmail.com>]
4254 *) Zlib compression BIO. This is a filter BIO which compressed and
4255 uncompresses any data passed through it.
4258 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
4259 RFC3394 compatible AES key wrapping.
4262 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
4263 sets string data without copying. X509_ALGOR_set0() and
4264 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
4265 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
4266 from an X509_ATTRIBUTE structure optionally checking it occurs only
4267 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
4271 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
4272 to get the expected BN_FLG_CONSTTIME behavior.
4273 [Bodo Moeller (Google)]
4277 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
4278 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
4279 - added some more tests to do_tests.pl
4280 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
4281 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
4282 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
4283 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
4284 - various changes to netware.pl to enable gcc-cross builds on Win32
4286 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
4287 - various changes to fix missing prototype warnings
4288 - fixed x86nasm.pl to create correct asm files for NASM COFF output
4289 - added AES, WHIRLPOOL and CPUID assembler code to build files
4290 - added missing AES assembler make rules to mk1mf.pl
4291 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
4292 [Guenter Knauf <eflash@gmx.net>]
4294 *) Implement certificate status request TLS extension defined in RFC3546.
4295 A client can set the appropriate parameters and receive the encoded
4296 OCSP response via a callback. A server can query the supplied parameters
4297 and set the encoded OCSP response in the callback. Add simplified examples
4298 to s_client and s_server.
4301 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
4303 *) Fix various bugs:
4304 + Binary incompatibility of ssl_ctx_st structure
4305 + DTLS interoperation with non-compliant servers
4306 + Don't call get_session_cb() without proposed session
4307 + Fix ia64 assembler code
4308 [Andy Polyakov, Steve Henson]
4310 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
4312 *) DTLS Handshake overhaul. There were longstanding issues with
4313 OpenSSL DTLS implementation, which were making it impossible for
4314 RFC 4347 compliant client to communicate with OpenSSL server.
4315 Unfortunately just fixing these incompatibilities would "cut off"
4316 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
4317 server keeps tolerating non RFC compliant syntax. The opposite is
4318 not true, 0.9.8f client can not communicate with earlier server.
4319 This update even addresses CVE-2007-4995.
4322 *) Changes to avoid need for function casts in OpenSSL: some compilers
4323 (gcc 4.2 and later) reject their use.
4324 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
4327 *) Add RFC4507 support to OpenSSL. This includes the corrections in
4328 RFC4507bis. The encrypted ticket format is an encrypted encoded
4329 SSL_SESSION structure, that way new session features are automatically
4332 If a client application caches session in an SSL_SESSION structure
4333 support is transparent because tickets are now stored in the encoded
4336 The SSL_CTX structure automatically generates keys for ticket
4337 protection in servers so again support should be possible
4338 with no application modification.
4340 If a client or server wishes to disable RFC4507 support then the option
4341 SSL_OP_NO_TICKET can be set.
4343 Add a TLS extension debugging callback to allow the contents of any client
4344 or server extensions to be examined.
4346 This work was sponsored by Google.
4349 *) Add initial support for TLS extensions, specifically for the server_name
4350 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
4351 have new members for a host name. The SSL data structure has an
4352 additional member SSL_CTX *initial_ctx so that new sessions can be
4353 stored in that context to allow for session resumption, even after the
4354 SSL has been switched to a new SSL_CTX in reaction to a client's
4355 server_name extension.
4357 New functions (subject to change):
4359 SSL_get_servername()
4360 SSL_get_servername_type()
4363 New CTRL codes and macros (subject to change):
4365 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
4366 - SSL_CTX_set_tlsext_servername_callback()
4367 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
4368 - SSL_CTX_set_tlsext_servername_arg()
4369 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
4371 openssl s_client has a new '-servername ...' option.
4373 openssl s_server has new options '-servername_host ...', '-cert2 ...',
4374 '-key2 ...', '-servername_fatal' (subject to change). This allows
4375 testing the HostName extension for a specific single host name ('-cert'
4376 and '-key' remain fallbacks for handshakes without HostName
4377 negotiation). If the unrecognized_name alert has to be sent, this by
4378 default is a warning; it becomes fatal with the '-servername_fatal'
4381 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
4383 *) Add AES and SSE2 assembly language support to VC++ build.
4386 *) Mitigate attack on final subtraction in Montgomery reduction.
4389 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
4390 (which previously caused an internal error).
4393 *) Squeeze another 10% out of IGE mode when in != out.
4396 *) AES IGE mode speedup.
4397 [Dean Gaudet (Google)]
4399 *) Add the Korean symmetric 128-bit cipher SEED (see
4400 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
4401 add SEED ciphersuites from RFC 4162:
4403 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
4404 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
4405 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
4406 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
4408 To minimize changes between patchlevels in the OpenSSL 0.9.8
4409 series, SEED remains excluded from compilation unless OpenSSL
4410 is configured with 'enable-seed'.
4411 [KISA, Bodo Moeller]
4413 *) Mitigate branch prediction attacks, which can be practical if a
4414 single processor is shared, allowing a spy process to extract
4415 information. For detailed background information, see
4416 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
4417 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
4418 and Necessary Software Countermeasures"). The core of the change
4419 are new versions BN_div_no_branch() and
4420 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
4421 respectively, which are slower, but avoid the security-relevant
4422 conditional branches. These are automatically called by BN_div()
4423 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
4424 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
4425 remove a conditional branch.
4427 BN_FLG_CONSTTIME is the new name for the previous
4428 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
4429 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
4430 in the exponent causes BN_mod_exp_mont() to use the alternative
4431 implementation in BN_mod_exp_mont_consttime().) The old name
4432 remains as a deprecated alias.
4434 Similarly, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
4435 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
4436 constant-time implementations for more than just exponentiation.
4437 Here too the old name is kept as a deprecated alias.
4439 BN_BLINDING_new() will now use BN_dup() for the modulus so that
4440 the BN_BLINDING structure gets an independent copy of the
4441 modulus. This means that the previous "BIGNUM *m" argument to
4442 BN_BLINDING_new() and to BN_BLINDING_create_param() now
4443 essentially becomes "const BIGNUM *m", although we can't actually
4444 change this in the header file before 0.9.9. It allows
4445 RSA_setup_blinding() to use BN_with_flags() on the modulus to
4446 enable BN_FLG_CONSTTIME.
4448 [Matthew D Wood (Intel Corp)]
4450 *) In the SSL/TLS server implementation, be strict about session ID
4451 context matching (which matters if an application uses a single
4452 external cache for different purposes). Previously,
4453 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
4454 set. This did ensure strict client verification, but meant that,
4455 with applications using a single external cache for quite
4456 different requirements, clients could circumvent ciphersuite
4457 restrictions for a given session ID context by starting a session
4458 in a different context.
4461 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
4462 a ciphersuite string such as "DEFAULT:RSA" cannot enable
4463 authentication-only ciphersuites.
4466 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
4467 not complete and could lead to a possible single byte overflow
4468 (CVE-2007-5135) [Ben Laurie]
4470 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
4472 *) Since AES128 and AES256 (and similarly Camellia128 and
4473 Camellia256) share a single mask bit in the logic of
4474 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
4475 kludge to work properly if AES128 is available and AES256 isn't
4476 (or if Camellia128 is available and Camellia256 isn't).
4479 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
4480 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
4481 When a point or a seed is encoded in a BIT STRING, we need to
4482 prevent the removal of trailing zero bits to get the proper DER
4483 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
4484 of a NamedBitList, for which trailing 0 bits need to be removed.)
4487 *) Have SSL/TLS server implementation tolerate "mismatched" record
4488 protocol version while receiving ClientHello even if the
4489 ClientHello is fragmented. (The server can't insist on the
4490 particular protocol version it has chosen before the ServerHello
4491 message has informed the client about his choice.)
4494 *) Add RFC 3779 support.
4495 [Rob Austein for ARIN, Ben Laurie]
4497 *) Load error codes if they are not already present instead of using a
4498 static variable. This allows them to be cleanly unloaded and reloaded.
4499 Improve header file function name parsing.
4502 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
4503 or CAPABILITY handshake as required by RFCs.
4506 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
4508 *) Introduce limits to prevent malicious keys being able to
4509 cause a denial of service. (CVE-2006-2940)
4510 [Steve Henson, Bodo Moeller]
4512 *) Fix ASN.1 parsing of certain invalid structures that can result
4513 in a denial of service. (CVE-2006-2937) [Steve Henson]
4515 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
4516 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
4518 *) Fix SSL client code which could crash if connecting to a
4519 malicious SSLv2 server. (CVE-2006-4343)
4520 [Tavis Ormandy and Will Drewry, Google Security Team]
4522 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
4523 match only those. Before that, "AES256-SHA" would be interpreted
4524 as a pattern and match "AES128-SHA" too (since AES128-SHA got
4525 the same strength classification in 0.9.7h) as we currently only
4526 have a single AES bit in the ciphersuite description bitmap.
4527 That change, however, also applied to ciphersuite strings such as
4528 "RC4-MD5" that intentionally matched multiple ciphersuites --
4529 namely, SSL 2.0 ciphersuites in addition to the more common ones
4530 from SSL 3.0/TLS 1.0.
4532 So we change the selection algorithm again: Naming an explicit
4533 ciphersuite selects this one ciphersuite, and any other similar
4534 ciphersuite (same bitmap) from *other* protocol versions.
4535 Thus, "RC4-MD5" again will properly select both the SSL 2.0
4536 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
4538 Since SSL 2.0 does not have any ciphersuites for which the
4539 128/256 bit distinction would be relevant, this works for now.
4540 The proper fix will be to use different bits for AES128 and
4541 AES256, which would have avoided the problems from the beginning;
4542 however, bits are scarce, so we can only do this in a new release
4543 (not just a patchlevel) when we can change the SSL_CIPHER
4544 definition to split the single 'unsigned long mask' bitmap into
4545 multiple values to extend the available space.
4549 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
4551 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
4552 (CVE-2006-4339) [Ben Laurie and Google Security Team]
4554 *) Add AES IGE and biIGE modes.
4557 *) Change the Unix randomness entropy gathering to use poll() when
4558 possible instead of select(), since the latter has some
4559 undesirable limitations.
4560 [Darryl Miles via Richard Levitte and Bodo Moeller]
4562 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
4563 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
4564 cannot be implicitly activated as part of, e.g., the "AES" alias.
4565 However, please upgrade to OpenSSL 0.9.9[-dev] for
4566 non-experimental use of the ECC ciphersuites to get TLS extension
4567 support, which is required for curve and point format negotiation
4568 to avoid potential handshake problems.
4571 *) Disable rogue ciphersuites:
4573 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
4574 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
4575 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
4577 The latter two were purportedly from
4578 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
4581 Also deactivate the remaining ciphersuites from
4582 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
4583 unofficial, and the ID has long expired.
4586 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
4587 dual-core machines) and other potential thread-safety issues.
4590 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
4591 versions), which is now available for royalty-free use
4592 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
4593 Also, add Camellia TLS ciphersuites from RFC 4132.
4595 To minimize changes between patchlevels in the OpenSSL 0.9.8
4596 series, Camellia remains excluded from compilation unless OpenSSL
4597 is configured with 'enable-camellia'.
4600 *) Disable the padding bug check when compression is in use. The padding
4601 bug check assumes the first packet is of even length, this is not
4602 necessarily true if compresssion is enabled and can result in false
4603 positives causing handshake failure. The actual bug test is ancient
4604 code so it is hoped that implementations will either have fixed it by
4605 now or any which still have the bug do not support compression.
4608 Changes between 0.9.8a and 0.9.8b [04 May 2006]
4610 *) When applying a cipher rule check to see if string match is an explicit
4611 cipher suite and only match that one cipher suite if it is.
4614 *) Link in manifests for VC++ if needed.
4615 [Austin Ziegler <halostatue@gmail.com>]
4617 *) Update support for ECC-based TLS ciphersuites according to
4618 draft-ietf-tls-ecc-12.txt with proposed changes (but without
4619 TLS extensions, which are supported starting with the 0.9.9
4620 branch, not in the OpenSSL 0.9.8 branch).
4623 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
4624 opaque EVP_CIPHER_CTX handling.
4627 *) Fixes and enhancements to zlib compression code. We now only use
4628 "zlib1.dll" and use the default __cdecl calling convention on Win32
4629 to conform with the standards mentioned here:
4630 http://www.zlib.net/DLL_FAQ.txt
4631 Static zlib linking now works on Windows and the new --with-zlib-include
4632 --with-zlib-lib options to Configure can be used to supply the location
4633 of the headers and library. Gracefully handle case where zlib library
4637 *) Several fixes and enhancements to the OID generation code. The old code
4638 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
4639 handle numbers larger than ULONG_MAX, truncated printing and had a
4640 non standard OBJ_obj2txt() behaviour.
4643 *) Add support for building of engines under engine/ as shared libraries
4644 under VC++ build system.
4647 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
4648 Hopefully, we will not see any false combination of paths any more.
4651 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
4653 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
4654 (part of SSL_OP_ALL). This option used to disable the
4655 countermeasure against man-in-the-middle protocol-version
4656 rollback in the SSL 2.0 server implementation, which is a bad
4657 idea. (CVE-2005-2969)
4659 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
4660 for Information Security, National Institute of Advanced Industrial
4661 Science and Technology [AIST], Japan)]
4663 *) Add two function to clear and return the verify parameter flags.
4666 *) Keep cipherlists sorted in the source instead of sorting them at
4667 runtime, thus removing the need for a lock.
4670 *) Avoid some small subgroup attacks in Diffie-Hellman.
4671 [Nick Mathewson and Ben Laurie]
4673 *) Add functions for well-known primes.
4676 *) Extended Windows CE support.
4677 [Satoshi Nakamura and Andy Polyakov]
4679 *) Initialize SSL_METHOD structures at compile time instead of during
4680 runtime, thus removing the need for a lock.
4683 *) Make PKCS7_decrypt() work even if no certificate is supplied by
4684 attempting to decrypt each encrypted key in turn. Add support to
4688 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
4690 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
4693 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
4696 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
4697 key into the same file any more.
4700 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
4703 *) Add -utf8 command line and config file option to 'ca'.
4704 [Stefan <stf@udoma.org]
4706 *) Removed the macro des_crypt(), as it seems to conflict with some
4707 libraries. Use DES_crypt().
4710 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
4711 involves renaming the source and generated shared-libs for
4712 both. The engines will accept the corrected or legacy ids
4713 ('ncipher' and '4758_cca' respectively) when binding. NB,
4714 this only applies when building 'shared'.
4715 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
4717 *) Add attribute functions to EVP_PKEY structure. Modify
4718 PKCS12_create() to recognize a CSP name attribute and
4719 use it. Make -CSP option work again in pkcs12 utility.
4722 *) Add new functionality to the bn blinding code:
4723 - automatic re-creation of the BN_BLINDING parameters after
4724 a fixed number of uses (currently 32)
4725 - add new function for parameter creation
4726 - introduce flags to control the update behaviour of the
4727 BN_BLINDING parameters
4728 - hide BN_BLINDING structure
4729 Add a second BN_BLINDING slot to the RSA structure to improve
4730 performance when a single RSA object is shared among several
4734 *) Add support for DTLS.
4735 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
4737 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
4738 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
4741 *) Remove buggy and incomplete DH cert support from
4742 ssl/ssl_rsa.c and ssl/s3_both.c
4745 *) Use SHA-1 instead of MD5 as the default digest algorithm for
4746 the apps/openssl applications.
4749 *) Compile clean with "-Wall -Wmissing-prototypes
4750 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
4751 DEBUG_SAFESTACK must also be set.
4754 *) Change ./Configure so that certain algorithms can be disabled by default.
4755 The new counterpiece to "no-xxx" is "enable-xxx".
4757 The patented RC5 and MDC2 algorithms will now be disabled unless
4758 "enable-rc5" and "enable-mdc2", respectively, are specified.
4760 (IDEA remains enabled despite being patented. This is because IDEA
4761 is frequently required for interoperability, and there is no license
4762 fee for non-commercial use. As before, "no-idea" can be used to
4763 avoid this algorithm.)
4767 *) Add processing of proxy certificates (see RFC 3820). This work was
4768 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
4769 EGEE (Enabling Grids for E-science in Europe).
4772 *) RC4 performance overhaul on modern architectures/implementations, such
4773 as Intel P4, IA-64 and AMD64.
4776 *) New utility extract-section.pl. This can be used specify an alternative
4777 section number in a pod file instead of having to treat each file as
4778 a separate case in Makefile. This can be done by adding two lines to the
4781 =for comment openssl_section:XXX
4783 The blank line is mandatory.
4787 *) New arguments -certform, -keyform and -pass for s_client and s_server
4788 to allow alternative format key and certificate files and passphrase
4792 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
4793 update associated structures and add various utility functions.
4795 Add new policy related verify parameters, include policy checking in
4796 standard verify code. Enhance 'smime' application with extra parameters
4797 to support policy checking and print out.
4800 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
4801 Nehemiah processors. These extensions support AES encryption in hardware
4802 as well as RNG (though RNG support is currently disabled).
4803 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
4805 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
4808 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
4809 [Andy Polyakov and a number of other people]
4811 *) Improved PowerPC platform support. Most notably BIGNUM assembler
4812 implementation contributed by IBM.
4813 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
4815 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
4816 exponent rather than 'unsigned long'. There is a corresponding change to
4817 the new 'rsa_keygen' element of the RSA_METHOD structure.
4818 [Jelte Jansen, Geoff Thorpe]
4820 *) Functionality for creating the initial serial number file is now
4821 moved from CA.pl to the 'ca' utility with a new option -create_serial.
4823 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
4824 number file to 1, which is bound to cause problems. To avoid
4825 the problems while respecting compatibility between different 0.9.7
4826 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
4827 CA.pl for serial number initialization. With the new release 0.9.8,
4828 we can fix the problem directly in the 'ca' utility.)
4831 *) Reduced header interdepencies by declaring more opaque objects in
4832 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
4833 give fewer recursive includes, which could break lazy source code - so
4834 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
4835 developers should define this symbol when building and using openssl to
4836 ensure they track the recommended behaviour, interfaces, [etc], but
4837 backwards-compatible behaviour prevails when this isn't defined.
4840 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
4843 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
4844 This will generate a random key of the appropriate length based on the
4845 cipher context. The EVP_CIPHER can provide its own random key generation
4846 routine to support keys of a specific form. This is used in the des and
4847 3des routines to generate a key of the correct parity. Update S/MIME
4848 code to use new functions and hence generate correct parity DES keys.
4849 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
4850 valid (weak or incorrect parity).
4853 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
4854 as looking them up. This is useful when the verified structure may contain
4855 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
4856 present unless the new PKCS7_NO_CRL flag is asserted.
4859 *) Extend ASN1 oid configuration module. It now additionally accepts the
4862 shortName = some long name, 1.2.3.4
4865 *) Reimplemented the BN_CTX implementation. There is now no more static
4866 limitation on the number of variables it can handle nor the depth of the
4867 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
4868 information can now expand as required, and rather than having a single
4869 static array of bignums, BN_CTX now uses a linked-list of such arrays
4870 allowing it to expand on demand whilst maintaining the usefulness of
4871 BN_CTX's "bundling".
4874 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
4875 to allow all RSA operations to function using a single BN_CTX.
4878 *) Preliminary support for certificate policy evaluation and checking. This
4879 is initially intended to pass the tests outlined in "Conformance Testing
4880 of Relying Party Client Certificate Path Processing Logic" v1.07.
4883 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
4884 remained unused and not that useful. A variety of other little bignum
4885 tweaks and fixes have also been made continuing on from the audit (see
4889 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
4890 associated ASN1, EVP and SSL functions and old ASN1 macros.
4893 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
4894 and this should never fail. So the return value from the use of
4895 BN_set_word() (which can fail due to needless expansion) is now deprecated;
4896 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
4899 *) BN_CTX_get() should return zero-valued bignums, providing the same
4900 initialised value as BN_new().
4901 [Geoff Thorpe, suggested by Ulf Möller]
4903 *) Support for inhibitAnyPolicy certificate extension.
4906 *) An audit of the BIGNUM code is underway, for which debugging code is
4907 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
4908 is considered valid when processing BIGNUMs, and causes execution to
4909 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
4910 further steps are taken to deliberately pollute unused data in BIGNUM
4911 structures to try and expose faulty code further on. For now, openssl will
4912 (in its default mode of operation) continue to tolerate the inconsistent
4913 forms that it has tolerated in the past, but authors and packagers should
4914 consider trying openssl and their own applications when compiled with
4915 these debugging symbols defined. It will help highlight potential bugs in
4916 their own code, and will improve the test coverage for OpenSSL itself. At
4917 some point, these tighter rules will become openssl's default to improve
4918 maintainability, though the assert()s and other overheads will remain only
4919 in debugging configurations. See bn.h for more details.
4920 [Geoff Thorpe, Nils Larsch, Ulf Möller]
4922 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
4923 that can only be obtained through BN_CTX_new() (which implicitly
4924 initialises it). The presence of this function only made it possible
4925 to overwrite an existing structure (and cause memory leaks).
4928 *) Because of the callback-based approach for implementing LHASH as a
4929 template type, lh_insert() adds opaque objects to hash-tables and
4930 lh_doall() or lh_doall_arg() are typically used with a destructor callback
4931 to clean up those corresponding objects before destroying the hash table
4932 (and losing the object pointers). So some over-zealous constifications in
4933 LHASH have been relaxed so that lh_insert() does not take (nor store) the
4934 objects as "const" and the lh_doall[_arg] callback wrappers are not
4935 prototyped to have "const" restrictions on the object pointers they are
4936 given (and so aren't required to cast them away any more).
4939 *) The tmdiff.h API was so ugly and minimal that our own timing utility
4940 (speed) prefers to use its own implementation. The two implementations
4941 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
4942 its object type properly exposed (MS_TM) instead of casting to/from "char
4943 *". This may still change yet if someone realises MS_TM and "ms_time_***"
4944 aren't necessarily the greatest nomenclatures - but this is what was used
4945 internally to the implementation so I've used that for now.
4948 *) Ensure that deprecated functions do not get compiled when
4949 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
4950 the self-tests were still using deprecated key-generation functions so
4951 these have been updated also.
4954 *) Reorganise PKCS#7 code to separate the digest location functionality
4955 into PKCS7_find_digest(), digest addition into PKCS7_bio_add_digest().
4956 New function PKCS7_set_digest() to set the digest type for PKCS#7
4957 digestedData type. Add additional code to correctly generate the
4958 digestedData type and add support for this type in PKCS7 initialization
4962 *) New function PKCS7_set0_type_other() this initializes a PKCS7
4963 structure of type "other".
4966 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
4967 sure the loop does correctly stop and breaking ("division by zero")
4968 modulus operations are not performed. The (pre-generated) prime
4969 table crypto/bn/bn_prime.h was already correct, but it could not be
4970 re-generated on some platforms because of the "division by zero"
4971 situation in the script.
4972 [Ralf S. Engelschall]
4974 *) Update support for ECC-based TLS ciphersuites according to
4975 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
4976 SHA-1 now is only used for "small" curves (where the
4977 representation of a field element takes up to 24 bytes); for
4978 larger curves, the field element resulting from ECDH is directly
4979 used as premaster secret.
4980 [Douglas Stebila (Sun Microsystems Laboratories)]
4982 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
4983 curve secp160r1 to the tests.
4984 [Douglas Stebila (Sun Microsystems Laboratories)]
4986 *) Add the possibility to load symbols globally with DSO.
4987 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
4989 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
4990 control of the error stack.
4993 *) Add support for STORE in ENGINE.
4996 *) Add the STORE type. The intention is to provide a common interface
4997 to certificate and key stores, be they simple file-based stores, or
4998 HSM-type store, or LDAP stores, or...
4999 NOTE: The code is currently UNTESTED and isn't really used anywhere.
5002 *) Add a generic structure called OPENSSL_ITEM. This can be used to
5003 pass a list of arguments to any function as well as provide a way
5004 for a function to pass data back to the caller.
5007 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
5008 works like BUF_strdup() but can be used to duplicate a portion of
5009 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
5013 *) Add the function sk_find_ex() which works like sk_find(), but will
5014 return an index to an element even if an exact match couldn't be
5015 found. The index is guaranteed to point at the element where the
5016 searched-for key would be inserted to preserve sorting order.
5019 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
5020 takes an extra flags argument for optional functionality. Currently,
5021 the following flags are defined:
5023 OBJ_BSEARCH_VALUE_ON_NOMATCH
5024 This one gets OBJ_bsearch_ex() to return a pointer to the first
5025 element where the comparing function returns a negative or zero
5028 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
5029 This one gets OBJ_bsearch_ex() to return a pointer to the first
5030 element where the comparing function returns zero. This is useful
5031 if there are more than one element where the comparing function
5035 *) Make it possible to create self-signed certificates with 'openssl ca'
5036 in such a way that the self-signed certificate becomes part of the
5037 CA database and uses the same mechanisms for serial number generation
5038 as all other certificate signing. The new flag '-selfsign' enables
5039 this functionality. Adapt CA.sh and CA.pl.in.
5042 *) Add functionality to check the public key of a certificate request
5043 against a given private. This is useful to check that a certificate
5044 request can be signed by that key (self-signing).
5047 *) Make it possible to have multiple active certificates with the same
5048 subject in the CA index file. This is done only if the keyword
5049 'unique_subject' is set to 'no' in the main CA section (default
5050 if 'CA_default') of the configuration file. The value is saved
5051 with the database itself in a separate index attribute file,
5052 named like the index file with '.attr' appended to the name.
5055 *) Generate muti valued AVAs using '+' notation in config files for
5059 *) Support for nameConstraints certificate extension.
5062 *) Support for policyConstraints certificate extension.
5065 *) Support for policyMappings certificate extension.
5068 *) Make sure the default DSA_METHOD implementation only uses its
5069 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
5070 and change its own handlers to be NULL so as to remove unnecessary
5071 indirection. This lets alternative implementations fallback to the
5072 default implementation more easily.
5075 *) Support for directoryName in GeneralName related extensions
5079 *) Make it possible to link applications using Makefile.shared.
5080 Make that possible even when linking against static libraries!
5083 *) Support for single pass processing for S/MIME signing. This now
5084 means that S/MIME signing can be done from a pipe, in addition
5085 cleartext signing (multipart/signed type) is effectively streaming
5086 and the signed data does not need to be all held in memory.
5088 This is done with a new flag PKCS7_STREAM. When this flag is set
5089 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
5090 is done after the data is output (and digests calculated) in
5091 SMIME_write_PKCS7().
5094 *) Add full support for -rpath/-R, both in shared libraries and
5095 applications, at least on the platforms where it's known how
5099 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
5100 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
5101 will now compute a table of multiples of the generator that
5102 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
5103 faster (notably in the case of a single point multiplication,
5104 scalar * generator).
5105 [Nils Larsch, Bodo Moeller]
5107 *) IPv6 support for certificate extensions. The various extensions
5108 which use the IP:a.b.c.d can now take IPv6 addresses using the
5109 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
5113 *) Added an ENGINE that implements RSA by performing private key
5114 exponentiations with the GMP library. The conversions to and from
5115 GMP's mpz_t format aren't optimised nor are any montgomery forms
5116 cached, and on x86 it appears OpenSSL's own performance has caught up.
5117 However there are likely to be other architectures where GMP could
5118 provide a boost. This ENGINE is not built in by default, but it can be
5119 specified at Configure time and should be accompanied by the necessary
5120 linker additions, eg;
5121 ./config -DOPENSSL_USE_GMP -lgmp
5124 *) "openssl engine" will not display ENGINE/DSO load failure errors when
5125 testing availability of engines with "-t" - the old behaviour is
5126 produced by increasing the feature's verbosity with "-tt".
5129 *) ECDSA routines: under certain error conditions uninitialized BN objects
5130 could be freed. Solution: make sure initialization is performed early
5131 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
5135 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
5136 and DH_METHOD (eg. by ENGINE implementations) to override the normal
5137 software implementations. For DSA and DH, parameter generation can
5138 also be overridden by providing the appropriate method callbacks.
5141 *) Change the "progress" mechanism used in key-generation and
5142 primality testing to functions that take a new BN_GENCB pointer in
5143 place of callback/argument pairs. The new API functions have "_ex"
5144 postfixes and the older functions are reimplemented as wrappers for
5145 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
5146 declarations of the old functions to help (graceful) attempts to
5147 migrate to the new functions. Also, the new key-generation API
5148 functions operate on a caller-supplied key-structure and return
5149 success/failure rather than returning a key or NULL - this is to
5150 help make "keygen" another member function of RSA_METHOD etc.
5152 Example for using the new callback interface:
5154 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
5158 BN_GENCB_set(&my_cb, my_callback, my_arg);
5160 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
5161 /* For the meaning of a, b in calls to my_callback(), see the
5162 * documentation of the function that calls the callback.
5163 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
5164 * my_callback should return 1 if it wants BN_is_prime_ex()
5165 * to continue, or 0 to stop.
5170 *) Change the ZLIB compression method to be stateful, and make it
5171 available to TLS with the number defined in
5172 draft-ietf-tls-compression-04.txt.
5175 *) Add the ASN.1 structures and functions for CertificatePair, which
5176 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
5178 CertificatePair ::= SEQUENCE {
5179 forward [0] Certificate OPTIONAL,
5180 reverse [1] Certificate OPTIONAL,
5181 -- at least one of the pair shall be present -- }
5183 Also implement the PEM functions to read and write certificate
5184 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
5186 This needed to be defined, mostly for the sake of the LDAP
5187 attribute crossCertificatePair, but may prove useful elsewhere as
5191 *) Make it possible to inhibit symlinking of shared libraries in
5192 Makefile.shared, for Cygwin's sake.
5195 *) Extend the BIGNUM API by creating a function
5196 void BN_set_negative(BIGNUM *a, int neg);
5197 and a macro that behave like
5198 int BN_is_negative(const BIGNUM *a);
5200 to avoid the need to access 'a->neg' directly in applications.
5203 *) Implement fast modular reduction for pseudo-Mersenne primes
5204 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
5205 EC_GROUP_new_curve_GFp() will now automatically use this
5207 [Nils Larsch <nla@trustcenter.de>]
5209 *) Add new lock type (CRYPTO_LOCK_BN).
5212 *) Change the ENGINE framework to automatically load engines
5213 dynamically from specific directories unless they could be
5214 found to already be built in or loaded. Move all the
5215 current engines except for the cryptodev one to a new
5217 The engines in engines/ are built as shared libraries if
5218 the "shared" options was given to ./Configure or ./config.
5219 Otherwise, they are inserted in libcrypto.a.
5220 /usr/local/ssl/engines is the default directory for dynamic
5221 engines, but that can be overridden at configure time through
5222 the usual use of --prefix and/or --openssldir, and at run
5223 time with the environment variable OPENSSL_ENGINES.
5224 [Geoff Thorpe and Richard Levitte]
5226 *) Add Makefile.shared, a helper makefile to build shared
5227 libraries. Adapt Makefile.org.
5230 *) Add version info to Win32 DLLs.
5231 [Peter 'Luna' Runestig" <peter@runestig.com>]
5233 *) Add new 'medium level' PKCS#12 API. Certificates and keys
5234 can be added using this API to created arbitrary PKCS#12
5235 files while avoiding the low level API.
5237 New options to PKCS12_create(), key or cert can be NULL and
5238 will then be omitted from the output file. The encryption
5239 algorithm NIDs can be set to -1 for no encryption, the mac
5240 iteration count can be set to 0 to omit the mac.
5242 Enhance pkcs12 utility by making the -nokeys and -nocerts
5243 options work when creating a PKCS#12 file. New option -nomac
5244 to omit the mac, NONE can be set for an encryption algorithm.
5245 New code is modified to use the enhanced PKCS12_create()
5246 instead of the low level API.
5249 *) Extend ASN1 encoder to support indefinite length constructed
5250 encoding. This can output sequences tags and octet strings in
5251 this form. Modify pk7_asn1.c to support indefinite length
5252 encoding. This is experimental and needs additional code to
5253 be useful, such as an ASN1 bio and some enhanced streaming
5256 Extend template encode functionality so that tagging is passed
5257 down to the template encoder.
5260 *) Let 'openssl req' fail if an argument to '-newkey' is not
5261 recognized instead of using RSA as a default.
5264 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
5265 As these are not official, they are not included in "ALL";
5266 the "ECCdraft" ciphersuite group alias can be used to select them.
5267 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
5269 *) Add ECDH engine support.
5270 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
5272 *) Add ECDH in new directory crypto/ecdh/.
5273 [Douglas Stebila (Sun Microsystems Laboratories)]
5275 *) Let BN_rand_range() abort with an error after 100 iterations
5276 without success (which indicates a broken PRNG).
5279 *) Change BN_mod_sqrt() so that it verifies that the input value
5280 is really the square of the return value. (Previously,
5281 BN_mod_sqrt would show GIGO behaviour.)
5284 *) Add named elliptic curves over binary fields from X9.62, SECG,
5285 and WAP/WTLS; add OIDs that were still missing.
5287 [Sheueling Chang Shantz and Douglas Stebila
5288 (Sun Microsystems Laboratories)]
5290 *) Extend the EC library for elliptic curves over binary fields
5291 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
5294 EC_GF2m_simple_method
5298 EC_GROUP_new_curve_GF2m
5299 EC_GROUP_set_curve_GF2m
5300 EC_GROUP_get_curve_GF2m
5301 EC_POINT_set_affine_coordinates_GF2m
5302 EC_POINT_get_affine_coordinates_GF2m
5303 EC_POINT_set_compressed_coordinates_GF2m
5305 Point compression for binary fields is disabled by default for
5306 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
5309 As binary polynomials are represented as BIGNUMs, various members
5310 of the EC_GROUP and EC_POINT data structures can be shared
5311 between the implementations for prime fields and binary fields;
5312 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
5313 are essentially identical to their ..._GFp counterparts.
5314 (For simplicity, the '..._GFp' prefix has been dropped from
5315 various internal method names.)
5317 An internal 'field_div' method (similar to 'field_mul' and
5318 'field_sqr') has been added; this is used only for binary fields.
5320 [Sheueling Chang Shantz and Douglas Stebila
5321 (Sun Microsystems Laboratories)]
5323 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
5324 through methods ('mul', 'precompute_mult').
5326 The generic implementations (now internally called 'ec_wNAF_mul'
5327 and 'ec_wNAF_precomputed_mult') remain the default if these
5328 methods are undefined.
5330 [Sheueling Chang Shantz and Douglas Stebila
5331 (Sun Microsystems Laboratories)]
5333 *) New function EC_GROUP_get_degree, which is defined through
5334 EC_METHOD. For curves over prime fields, this returns the bit
5335 length of the modulus.
5337 [Sheueling Chang Shantz and Douglas Stebila
5338 (Sun Microsystems Laboratories)]
5340 *) New functions EC_GROUP_dup, EC_POINT_dup.
5341 (These simply call ..._new and ..._copy).
5343 [Sheueling Chang Shantz and Douglas Stebila
5344 (Sun Microsystems Laboratories)]
5346 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
5347 Polynomials are represented as BIGNUMs (where the sign bit is not
5348 used) in the following functions [macros]:
5351 BN_GF2m_sub [= BN_GF2m_add]
5352 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
5353 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
5354 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
5356 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
5357 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
5358 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
5359 BN_GF2m_cmp [= BN_ucmp]
5361 (Note that only the 'mod' functions are actually for fields GF(2^m).
5362 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
5364 For some functions, an the irreducible polynomial defining a
5365 field can be given as an 'unsigned int[]' with strictly
5366 decreasing elements giving the indices of those bits that are set;
5367 i.e., p[] represents the polynomial
5368 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
5370 p[0] > p[1] > ... > p[k] = 0.
5371 This applies to the following functions:
5376 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
5377 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
5379 BN_GF2m_mod_sqrt_arr
5380 BN_GF2m_mod_solve_quad_arr
5384 Conversion can be performed by the following functions:
5389 bntest.c has additional tests for binary polynomial arithmetic.
5391 Two implementations for BN_GF2m_mod_div() are available.
5392 The default algorithm simply uses BN_GF2m_mod_inv() and
5393 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
5394 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
5395 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
5397 [Sheueling Chang Shantz and Douglas Stebila
5398 (Sun Microsystems Laboratories)]
5400 *) Add new error code 'ERR_R_DISABLED' that can be used when some
5401 functionality is disabled at compile-time.
5402 [Douglas Stebila <douglas.stebila@sun.com>]
5404 *) Change default behaviour of 'openssl asn1parse' so that more
5405 information is visible when viewing, e.g., a certificate:
5407 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
5408 mode the content of non-printable OCTET STRINGs is output in a
5409 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
5410 avoid the appearance of a printable string.
5411 [Nils Larsch <nla@trustcenter.de>]
5413 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
5415 EC_GROUP_set_asn1_flag()
5416 EC_GROUP_get_asn1_flag()
5417 EC_GROUP_set_point_conversion_form()
5418 EC_GROUP_get_point_conversion_form()
5419 These control ASN1 encoding details:
5420 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
5421 has been set to OPENSSL_EC_NAMED_CURVE.
5422 - Points are encoded in uncompressed form by default; options for
5423 asn1_for are as for point2oct, namely
5424 POINT_CONVERSION_COMPRESSED
5425 POINT_CONVERSION_UNCOMPRESSED
5426 POINT_CONVERSION_HYBRID
5428 Also add 'seed' and 'seed_len' members to EC_GROUP with access
5431 EC_GROUP_get0_seed()
5432 EC_GROUP_get_seed_len()
5433 This is used only for ASN1 purposes (so far).
5434 [Nils Larsch <nla@trustcenter.de>]
5436 *) Add 'field_type' member to EC_METHOD, which holds the NID
5437 of the appropriate field type OID. The new function
5438 EC_METHOD_get_field_type() returns this value.
5439 [Nils Larsch <nla@trustcenter.de>]
5444 EC_POINT_point2hex()
5445 EC_POINT_hex2point()
5446 providing useful interfaces to EC_POINT_point2oct() and
5447 EC_POINT_oct2point().
5448 [Nils Larsch <nla@trustcenter.de>]
5450 *) Change internals of the EC library so that the functions
5451 EC_GROUP_set_generator()
5452 EC_GROUP_get_generator()
5453 EC_GROUP_get_order()
5454 EC_GROUP_get_cofactor()
5455 are implemented directly in crypto/ec/ec_lib.c and not dispatched
5456 to methods, which would lead to unnecessary code duplication when
5457 adding different types of curves.
5458 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
5460 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
5461 arithmetic, and such that modified wNAFs are generated
5462 (which avoid length expansion in many cases).
5465 *) Add a function EC_GROUP_check_discriminant() (defined via
5466 EC_METHOD) that verifies that the curve discriminant is non-zero.
5468 Add a function EC_GROUP_check() that makes some sanity tests
5469 on a EC_GROUP, its generator and order. This includes
5470 EC_GROUP_check_discriminant().
5471 [Nils Larsch <nla@trustcenter.de>]
5473 *) Add ECDSA in new directory crypto/ecdsa/.
5475 Add applications 'openssl ecparam' and 'openssl ecdsa'
5476 (these are based on 'openssl dsaparam' and 'openssl dsa').
5478 ECDSA support is also included in various other files across the
5479 library. Most notably,
5480 - 'openssl req' now has a '-newkey ecdsa:file' option;
5481 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
5482 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
5483 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
5484 them suitable for ECDSA where domain parameters must be
5485 extracted before the specific public key;
5486 - ECDSA engine support has been added.
5487 [Nils Larsch <nla@trustcenter.de>]
5489 *) Include some named elliptic curves, and add OIDs from X9.62,
5490 SECG, and WAP/WTLS. Each curve can be obtained from the new
5492 EC_GROUP_new_by_curve_name(),
5493 and the list of available named curves can be obtained with
5494 EC_get_builtin_curves().
5495 Also add a 'curve_name' member to EC_GROUP objects, which can be
5497 EC_GROUP_set_curve_name()
5498 EC_GROUP_get_curve_name()
5499 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
5501 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5502 was actually never needed) and in BN_mul(). The removal in BN_mul()
5503 required a small change in bn_mul_part_recursive() and the addition
5504 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5505 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5506 bn_sub_words() and bn_add_words() except they take arrays with
5510 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
5512 *) Cleanse PEM buffers before freeing them since they may contain
5514 [Benjamin Bennett <ben@psc.edu>]
5516 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
5517 a ciphersuite string such as "DEFAULT:RSA" cannot enable
5518 authentication-only ciphersuites.
5521 *) Since AES128 and AES256 share a single mask bit in the logic of
5522 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
5523 kludge to work properly if AES128 is available and AES256 isn't.
5526 *) Expand security boundary to match 1.1.1 module.
5529 *) Remove redundant features: hash file source, editing of test vectors
5530 modify fipsld to use external fips_premain.c signature.
5533 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
5534 run algorithm test programs.
5537 *) Make algorithm test programs more tolerant of whitespace.
5540 *) Have SSL/TLS server implementation tolerate "mismatched" record
5541 protocol version while receiving ClientHello even if the
5542 ClientHello is fragmented. (The server can't insist on the
5543 particular protocol version it has chosen before the ServerHello
5544 message has informed the client about his choice.)
5547 *) Load error codes if they are not already present instead of using a
5548 static variable. This allows them to be cleanly unloaded and reloaded.
5551 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
5553 *) Introduce limits to prevent malicious keys being able to
5554 cause a denial of service. (CVE-2006-2940)
5555 [Steve Henson, Bodo Moeller]
5557 *) Fix ASN.1 parsing of certain invalid structures that can result
5558 in a denial of service. (CVE-2006-2937) [Steve Henson]
5560 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
5561 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
5563 *) Fix SSL client code which could crash if connecting to a
5564 malicious SSLv2 server. (CVE-2006-4343)
5565 [Tavis Ormandy and Will Drewry, Google Security Team]
5567 *) Change ciphersuite string processing so that an explicit
5568 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
5569 will no longer include "AES128-SHA"), and any other similar
5570 ciphersuite (same bitmap) from *other* protocol versions (so that
5571 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
5572 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
5573 changes from 0.9.8b and 0.9.8d.
5576 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
5578 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
5579 (CVE-2006-4339) [Ben Laurie and Google Security Team]
5581 *) Change the Unix randomness entropy gathering to use poll() when
5582 possible instead of select(), since the latter has some
5583 undesirable limitations.
5584 [Darryl Miles via Richard Levitte and Bodo Moeller]
5586 *) Disable rogue ciphersuites:
5588 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
5589 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
5590 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
5592 The latter two were purportedly from
5593 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
5596 Also deactive the remaining ciphersuites from
5597 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
5598 unofficial, and the ID has long expired.
5601 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
5602 dual-core machines) and other potential thread-safety issues.
5605 Changes between 0.9.7i and 0.9.7j [04 May 2006]
5607 *) Adapt fipsld and the build system to link against the validated FIPS
5608 module in FIPS mode.
5611 *) Fixes for VC++ 2005 build under Windows.
5614 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
5615 from a Windows bash shell such as MSYS. It is autodetected from the
5616 "config" script when run from a VC++ environment. Modify standard VC++
5617 build to use fipscanister.o from the GNU make build.
5620 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
5622 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
5623 The value now differs depending on if you build for FIPS or not.
5624 BEWARE! A program linked with a shared FIPSed libcrypto can't be
5625 safely run with a non-FIPSed libcrypto, as it may crash because of
5626 the difference induced by this change.
5629 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
5631 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
5632 (part of SSL_OP_ALL). This option used to disable the
5633 countermeasure against man-in-the-middle protocol-version
5634 rollback in the SSL 2.0 server implementation, which is a bad
5635 idea. (CVE-2005-2969)
5637 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
5638 for Information Security, National Institute of Advanced Industrial
5639 Science and Technology [AIST], Japan)]
5641 *) Minimal support for X9.31 signatures and PSS padding modes. This is
5642 mainly for FIPS compliance and not fully integrated at this stage.
5645 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
5646 the exponentiation using a fixed-length exponent. (Otherwise,
5647 the information leaked through timing could expose the secret key
5648 after many signatures; cf. Bleichenbacher's attack on DSA with
5652 *) Make a new fixed-window mod_exp implementation the default for
5653 RSA, DSA, and DH private-key operations so that the sequence of
5654 squares and multiplies and the memory access pattern are
5655 independent of the particular secret key. This will mitigate
5656 cache-timing and potential related attacks.
5658 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
5659 and this is automatically used by BN_mod_exp_mont() if the new flag
5660 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
5661 will use this BN flag for private exponents unless the flag
5662 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
5663 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
5665 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
5667 *) Change the client implementation for SSLv23_method() and
5668 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
5669 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
5670 (Previously, the SSL 2.0 backwards compatible Client Hello
5671 message format would be used even with SSL_OP_NO_SSLv2.)
5674 *) Add support for smime-type MIME parameter in S/MIME messages which some
5678 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
5679 a threadsafe manner. Modify rsa code to use new function and add calls
5680 to dsa and dh code (which had race conditions before).
5683 *) Include the fixed error library code in the C error file definitions
5684 instead of fixing them up at runtime. This keeps the error code
5685 structures constant.
5688 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
5690 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
5693 *) Fixes for newer kerberos headers. NB: the casts are needed because
5694 the 'length' field is signed on one version and unsigned on another
5695 with no (?) obvious way to tell the difference, without these VC++
5696 complains. Also the "definition" of FAR (blank) is no longer included
5697 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
5698 some needed definitions.
5701 *) Undo Cygwin change.
5704 *) Added support for proxy certificates according to RFC 3820.
5705 Because they may be a security thread to unaware applications,
5706 they must be explicitly allowed in run-time. See
5707 docs/HOWTO/proxy_certificates.txt for further information.
5710 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
5712 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
5713 server and client random values. Previously
5714 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
5715 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
5717 This change has negligible security impact because:
5719 1. Server and client random values still have 24 bytes of pseudo random
5722 2. Server and client random values are sent in the clear in the initial
5725 3. The master secret is derived using the premaster secret (48 bytes in
5726 size for static RSA ciphersuites) as well as client server and random
5729 The OpenSSL team would like to thank the UK NISCC for bringing this issue
5732 [Stephen Henson, reported by UK NISCC]
5734 *) Use Windows randomness collection on Cygwin.
5737 *) Fix hang in EGD/PRNGD query when communication socket is closed
5738 prematurely by EGD/PRNGD.
5739 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
5741 *) Prompt for pass phrases when appropriate for PKCS12 input format.
5744 *) Back-port of selected performance improvements from development
5745 branch, as well as improved support for PowerPC platforms.
5748 *) Add lots of checks for memory allocation failure, error codes to indicate
5749 failure and freeing up memory if a failure occurs.
5750 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
5752 *) Add new -passin argument to dgst.
5755 *) Perform some character comparisons of different types in X509_NAME_cmp:
5756 this is needed for some certificates that re-encode DNs into UTF8Strings
5757 (in violation of RFC3280) and can't or won't issue name rollover
5761 *) Make an explicit check during certificate validation to see that
5762 the CA setting in each certificate on the chain is correct. As a
5763 side effect always do the following basic checks on extensions,
5764 not just when there's an associated purpose to the check:
5766 - if there is an unhandled critical extension (unless the user
5767 has chosen to ignore this fault)
5768 - if the path length has been exceeded (if one is set at all)
5769 - that certain extensions fit the associated purpose (if one has
5773 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
5775 *) Avoid a race condition when CRLs are checked in a multi threaded
5776 environment. This would happen due to the reordering of the revoked
5777 entries during signature checking and serial number lookup. Now the
5778 encoding is cached and the serial number sort performed under a lock.
5779 Add new STACK function sk_is_sorted().
5782 *) Add Delta CRL to the extension code.
5785 *) Various fixes to s3_pkt.c so alerts are sent properly.
5786 [David Holmes <d.holmes@f5.com>]
5788 *) Reduce the chances of duplicate issuer name and serial numbers (in
5789 violation of RFC3280) using the OpenSSL certificate creation utilities.
5790 This is done by creating a random 64 bit value for the initial serial
5791 number when a serial number file is created or when a self signed
5792 certificate is created using 'openssl req -x509'. The initial serial
5793 number file is created using 'openssl x509 -next_serial' in CA.pl
5794 rather than being initialized to 1.
5797 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
5799 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5800 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5801 [Joe Orton, Steve Henson]
5803 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
5805 [Joe Orton, Steve Henson]
5807 *) Make it possible to have multiple active certificates with the same
5808 subject in the CA index file. This is done only if the keyword
5809 'unique_subject' is set to 'no' in the main CA section (default
5810 if 'CA_default') of the configuration file. The value is saved
5811 with the database itself in a separate index attribute file,
5812 named like the index file with '.attr' appended to the name.
5815 *) X509 verify fixes. Disable broken certificate workarounds when
5816 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
5817 keyUsage extension present. Don't accept CRLs with unhandled critical
5818 extensions: since verify currently doesn't process CRL extensions this
5819 rejects a CRL with *any* critical extensions. Add new verify error codes
5823 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
5824 A clarification of RFC2560 will require the use of OCTET STRINGs and
5825 some implementations cannot handle the current raw format. Since OpenSSL
5826 copies and compares OCSP nonces as opaque blobs without any attempt at
5827 parsing them this should not create any compatibility issues.
5830 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
5831 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
5832 this HMAC (and other) operations are several times slower than OpenSSL
5836 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
5837 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
5839 *) Use the correct content when signing type "other".
5842 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
5844 *) Fix various bugs revealed by running the NISCC test suite:
5846 Stop out of bounds reads in the ASN1 code when presented with
5847 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5849 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
5851 If verify callback ignores invalid public key errors don't try to check
5852 certificate signature with the NULL public key.
5856 *) New -ignore_err option in ocsp application to stop the server
5857 exiting on the first error in a request.
5860 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5861 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5865 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5866 extra data after the compression methods not only for TLS 1.0
5867 but also for SSL 3.0 (as required by the specification).
5868 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5870 *) Change X509_certificate_type() to mark the key as exported/exportable
5871 when it's 512 *bits* long, not 512 bytes.
5874 *) Change AES_cbc_encrypt() so it outputs exact multiple of
5875 blocks during encryption.
5878 *) Various fixes to base64 BIO and non blocking I/O. On write
5879 flushes were not handled properly if the BIO retried. On read
5880 data was not being buffered properly and had various logic bugs.
5881 This also affects blocking I/O when the data being decoded is a
5885 *) Various S/MIME bugfixes and compatibility changes:
5886 output correct application/pkcs7 MIME type if
5887 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
5888 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
5889 of files as .eml work). Correctly handle very long lines in MIME
5893 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
5895 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5896 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5897 a protocol version number mismatch like a decryption error
5898 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5901 *) Turn on RSA blinding by default in the default implementation
5902 to avoid a timing attack. Applications that don't want it can call
5903 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5904 They would be ill-advised to do so in most cases.
5905 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5907 *) Change RSA blinding code so that it works when the PRNG is not
5908 seeded (in this case, the secret RSA exponent is abused as
5909 an unpredictable seed -- if it is not unpredictable, there
5910 is no point in blinding anyway). Make RSA blinding thread-safe
5911 by remembering the creator's thread ID in rsa->blinding and
5912 having all other threads use local one-time blinding factors
5913 (this requires more computation than sharing rsa->blinding, but
5914 avoids excessive locking; and if an RSA object is not shared
5915 between threads, blinding will still be very fast).
5918 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
5919 ENGINE as defaults for all supported algorithms irrespective of
5920 the 'flags' parameter. 'flags' is now honoured, so applications
5921 should make sure they are passing it correctly.
5924 *) Target "mingw" now allows native Windows code to be generated in
5925 the Cygwin environment as well as with the MinGW compiler.
5928 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
5930 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5931 via timing by performing a MAC computation even if incorrect
5932 block cipher padding has been found. This is a countermeasure
5933 against active attacks where the attacker has to distinguish
5934 between bad padding and a MAC verification error. (CVE-2003-0078)
5936 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5937 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5938 Martin Vuagnoux (EPFL, Ilion)]
5940 *) Make the no-err option work as intended. The intention with no-err
5941 is not to have the whole error stack handling routines removed from
5942 libcrypto, it's only intended to remove all the function name and
5943 reason texts, thereby removing some of the footprint that may not
5944 be interesting if those errors aren't displayed anyway.
5946 NOTE: it's still possible for any application or module to have it's
5947 own set of error texts inserted. The routines are there, just not
5948 used by default when no-err is given.
5951 *) Add support for FreeBSD on IA64.
5952 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
5954 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
5955 Kerberos function mit_des_cbc_cksum(). Before this change,
5956 the value returned by DES_cbc_cksum() was like the one from
5957 mit_des_cbc_cksum(), except the bytes were swapped.
5958 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
5960 *) Allow an application to disable the automatic SSL chain building.
5961 Before this a rather primitive chain build was always performed in
5962 ssl3_output_cert_chain(): an application had no way to send the
5963 correct chain if the automatic operation produced an incorrect result.
5965 Now the chain builder is disabled if either:
5967 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
5969 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
5971 The reasoning behind this is that an application would not want the
5972 auto chain building to take place if extra chain certificates are
5973 present and it might also want a means of sending no additional
5974 certificates (for example the chain has two certificates and the
5978 *) Add the possibility to build without the ENGINE framework.
5979 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
5981 *) Under Win32 gmtime() can return NULL: check return value in
5982 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
5985 *) DSA routines: under certain error conditions uninitialized BN objects
5986 could be freed. Solution: make sure initialization is performed early
5987 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
5988 Nils Larsch <nla@trustcenter.de> via PR#459)
5991 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
5992 checked on reconnect on the client side, therefore session resumption
5993 could still fail with a "ssl session id is different" error. This
5994 behaviour is masked when SSL_OP_ALL is used due to
5995 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
5996 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
5997 followup to PR #377.
6000 *) IA-32 assembler support enhancements: unified ELF targets, support
6001 for SCO/Caldera platforms, fix for Cygwin shared build.
6004 *) Add support for FreeBSD on sparc64. As a consequence, support for
6005 FreeBSD on non-x86 processors is separate from x86 processors on
6006 the config script, much like the NetBSD support.
6007 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
6009 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
6011 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
6014 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
6015 code (06) was taken as the first octet of the session ID and the last
6016 octet was ignored consequently. As a result SSLv2 client side session
6017 caching could not have worked due to the session ID mismatch between
6019 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
6023 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
6024 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
6028 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
6029 seems that in spite of existing for more than a year, many application
6030 author have done nothing to provide the necessary callbacks, which
6031 means that this particular engine will not work properly anywhere.
6032 This is a very unfortunate situation which forces us, in the name
6033 of usability, to give the hw_ncipher.c a static lock, which is part
6035 NOTE: This is for the 0.9.7 series ONLY. This hack will never
6036 appear in 0.9.8 or later. We EXPECT application authors to have
6037 dealt properly with this when 0.9.8 is released (unless we actually
6038 make such changes in the libcrypto locking code that changes will
6039 have to be made anyway).
6042 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
6043 octets have been read, EOF or an error occurs. Without this change
6044 some truncated ASN1 structures will not produce an error.
6047 *) Disable Heimdal support, since it hasn't been fully implemented.
6048 Still give the possibility to force the use of Heimdal, but with
6049 warnings and a request that patches get sent to openssl-dev.
6052 *) Add the VC-CE target, introduce the WINCE sysname, and add
6053 INSTALL.WCE and appropriate conditionals to make it build.
6054 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
6056 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
6057 cygssl-x.y.z.dll, where x, y and z are the major, minor and
6058 edit numbers of the version.
6059 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
6061 *) Introduce safe string copy and catenation functions
6062 (BUF_strlcpy() and BUF_strlcat()).
6063 [Ben Laurie (CHATS) and Richard Levitte]
6065 *) Avoid using fixed-size buffers for one-line DNs.
6066 [Ben Laurie (CHATS)]
6068 *) Add BUF_MEM_grow_clean() to avoid information leakage when
6069 resizing buffers containing secrets, and use where appropriate.
6070 [Ben Laurie (CHATS)]
6072 *) Avoid using fixed size buffers for configuration file location.
6073 [Ben Laurie (CHATS)]
6075 *) Avoid filename truncation for various CA files.
6076 [Ben Laurie (CHATS)]
6078 *) Use sizeof in preference to magic numbers.
6079 [Ben Laurie (CHATS)]
6081 *) Avoid filename truncation in cert requests.
6082 [Ben Laurie (CHATS)]
6084 *) Add assertions to check for (supposedly impossible) buffer
6086 [Ben Laurie (CHATS)]
6088 *) Don't cache truncated DNS entries in the local cache (this could
6089 potentially lead to a spoofing attack).
6090 [Ben Laurie (CHATS)]
6092 *) Fix various buffers to be large enough for hex/decimal
6093 representations in a platform independent manner.
6094 [Ben Laurie (CHATS)]
6096 *) Add CRYPTO_realloc_clean() to avoid information leakage when
6097 resizing buffers containing secrets, and use where appropriate.
6098 [Ben Laurie (CHATS)]
6100 *) Add BIO_indent() to avoid much slightly worrying code to do
6102 [Ben Laurie (CHATS)]
6104 *) Convert sprintf()/BIO_puts() to BIO_printf().
6105 [Ben Laurie (CHATS)]
6107 *) buffer_gets() could terminate with the buffer only half
6109 [Ben Laurie (CHATS)]
6111 *) Add assertions to prevent user-supplied crypto functions from
6112 overflowing internal buffers by having large block sizes, etc.
6113 [Ben Laurie (CHATS)]
6115 *) New OPENSSL_assert() macro (similar to assert(), but enabled
6117 [Ben Laurie (CHATS)]
6119 *) Eliminate unused copy of key in RC4.
6120 [Ben Laurie (CHATS)]
6122 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
6123 [Ben Laurie (CHATS)]
6125 *) Fix off-by-one error in EGD path.
6126 [Ben Laurie (CHATS)]
6128 *) If RANDFILE path is too long, ignore instead of truncating.
6129 [Ben Laurie (CHATS)]
6131 *) Eliminate unused and incorrectly sized X.509 structure
6133 [Ben Laurie (CHATS)]
6135 *) Eliminate unused and dangerous function knumber().
6136 [Ben Laurie (CHATS)]
6138 *) Eliminate unused and dangerous structure, KSSL_ERR.
6139 [Ben Laurie (CHATS)]
6141 *) Protect against overlong session ID context length in an encoded
6142 session object. Since these are local, this does not appear to be
6144 [Ben Laurie (CHATS)]
6146 *) Change from security patch (see 0.9.6e below) that did not affect
6147 the 0.9.6 release series:
6149 Remote buffer overflow in SSL3 protocol - an attacker could
6150 supply an oversized master key in Kerberos-enabled versions.
6152 [Ben Laurie (CHATS)]
6154 *) Change the SSL kerb5 codes to match RFC 2712.
6157 *) Make -nameopt work fully for req and add -reqopt switch.
6158 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
6160 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
6161 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
6163 *) Make sure tests can be performed even if the corresponding algorithms
6164 have been removed entirely. This was also the last step to make
6165 OpenSSL compilable with DJGPP under all reasonable conditions.
6166 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
6168 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
6169 to allow version independent disabling of normally unselected ciphers,
6170 which may be activated as a side-effect of selecting a single cipher.
6172 (E.g., cipher list string "RSA" enables ciphersuites that are left
6173 out of "ALL" because they do not provide symmetric encryption.
6174 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
6175 [Lutz Jaenicke, Bodo Moeller]
6177 *) Add appropriate support for separate platform-dependent build
6178 directories. The recommended way to make a platform-dependent
6179 build directory is the following (tested on Linux), maybe with
6182 # Place yourself outside of the OpenSSL source tree. In
6183 # this example, the environment variable OPENSSL_SOURCE
6184 # is assumed to contain the absolute OpenSSL source directory.
6185 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
6186 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
6187 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
6188 mkdir -p `dirname $F`
6189 ln -s $OPENSSL_SOURCE/$F $F
6192 To be absolutely sure not to disturb the source tree, a "make clean"
6193 is a good thing. If it isn't successful, don't worry about it,
6194 it probably means the source directory is very clean.
6197 *) Make sure any ENGINE control commands make local copies of string
6198 pointers passed to them whenever necessary. Otherwise it is possible
6199 the caller may have overwritten (or deallocated) the original string
6200 data when a later ENGINE operation tries to use the stored values.
6201 [Götz Babin-Ebell <babinebell@trustcenter.de>]
6203 *) Improve diagnostics in file reading and command-line digests.
6204 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
6206 *) Add AES modes CFB and OFB to the object database. Correct an
6207 error in AES-CFB decryption.
6210 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
6211 allows existing EVP_CIPHER_CTX structures to be reused after
6212 calling EVP_*Final(). This behaviour is used by encryption
6213 BIOs and some applications. This has the side effect that
6214 applications must explicitly clean up cipher contexts with
6215 EVP_CIPHER_CTX_cleanup() or they will leak memory.
6218 *) Check the values of dna and dnb in bn_mul_recursive before calling
6219 bn_mul_comba (a non zero value means the a or b arrays do not contain
6220 n2 elements) and fallback to bn_mul_normal if either is not zero.
6223 *) Fix escaping of non-ASCII characters when using the -subj option
6224 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
6227 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
6228 form for "surname", serialNumber has no short form.
6229 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
6230 therefore remove "mail" short name for "internet 7".
6231 The OID for unique identifiers in X509 certificates is
6232 x500UniqueIdentifier, not uniqueIdentifier.
6233 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
6236 *) Add an "init" command to the ENGINE config module and auto initialize
6237 ENGINEs. Without any "init" command the ENGINE will be initialized
6238 after all ctrl commands have been executed on it. If init=1 the
6239 ENGINE is initailized at that point (ctrls before that point are run
6240 on the uninitialized ENGINE and after on the initialized one). If
6241 init=0 then the ENGINE will not be iniatialized at all.
6244 *) Fix the 'app_verify_callback' interface so that the user-defined
6245 argument is actually passed to the callback: In the
6246 SSL_CTX_set_cert_verify_callback() prototype, the callback
6247 declaration has been changed from
6250 int (*cb)(X509_STORE_CTX *,void *);
6251 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
6252 i=s->ctx->app_verify_callback(&ctx)
6253 has been changed into
6254 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
6256 To update applications using SSL_CTX_set_cert_verify_callback(),
6257 a dummy argument can be added to their callback functions.
6258 [D. K. Smetters <smetters@parc.xerox.com>]
6260 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
6261 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
6263 *) Add and OPENSSL_LOAD_CONF define which will cause
6264 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
6265 This allows older applications to transparently support certain
6266 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
6267 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
6268 load the config file and OPENSSL_add_all_algorithms_conf() which will
6269 always load it have also been added.
6272 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
6273 Adjust NIDs and EVP layer.
6274 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6276 *) Config modules support in openssl utility.
6278 Most commands now load modules from the config file,
6279 though in a few (such as version) this isn't done
6280 because it couldn't be used for anything.
6282 In the case of ca and req the config file used is
6283 the same as the utility itself: that is the -config
6284 command line option can be used to specify an
6288 *) Move default behaviour from OPENSSL_config(). If appname is NULL
6289 use "openssl_conf" if filename is NULL use default openssl config file.
6292 *) Add an argument to OPENSSL_config() to allow the use of an alternative
6293 config section name. Add a new flag to tolerate a missing config file
6294 and move code to CONF_modules_load_file().
6297 *) Support for crypto accelerator cards from Accelerated Encryption
6298 Processing, www.aep.ie. (Use engine 'aep')
6299 The support was copied from 0.9.6c [engine] and adapted/corrected
6300 to work with the new engine framework.
6301 [AEP Inc. and Richard Levitte]
6303 *) Support for SureWare crypto accelerator cards from Baltimore
6304 Technologies. (Use engine 'sureware')
6305 The support was copied from 0.9.6c [engine] and adapted
6306 to work with the new engine framework.
6309 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
6310 make the newer ENGINE framework commands for the CHIL engine work.
6311 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
6313 *) Make it possible to produce shared libraries on ReliantUNIX.
6314 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
6316 *) Add the configuration target debug-linux-ppro.
6317 Make 'openssl rsa' use the general key loading routines
6318 implemented in apps.c, and make those routines able to
6319 handle the key format FORMAT_NETSCAPE and the variant
6321 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
6323 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
6324 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
6326 *) Add -keyform to rsautl, and document -engine.
6327 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
6329 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
6330 BIO_R_NO_SUCH_FILE error code rather than the generic
6331 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
6334 *) Add new functions
6336 ERR_peek_last_error_line
6337 ERR_peek_last_error_line_data.
6338 These are similar to
6341 ERR_peek_error_line_data,
6342 but report on the latest error recorded rather than the first one
6343 still in the error queue.
6344 [Ben Laurie, Bodo Moeller]
6346 *) default_algorithms option in ENGINE config module. This allows things
6348 default_algorithms = ALL
6349 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
6352 *) Preliminary ENGINE config module.
6355 *) New experimental application configuration code.
6358 *) Change the AES code to follow the same name structure as all other
6359 symmetric ciphers, and behave the same way. Move everything to
6360 the directory crypto/aes, thereby obsoleting crypto/rijndael.
6361 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6363 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
6364 [Ben Laurie and Theo de Raadt]
6366 *) Add option to output public keys in req command.
6367 [Massimiliano Pala madwolf@openca.org]
6369 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
6370 (up to about 10% better than before for P-192 and P-224).
6373 *) New functions/macros
6375 SSL_CTX_set_msg_callback(ctx, cb)
6376 SSL_CTX_set_msg_callback_arg(ctx, arg)
6377 SSL_set_msg_callback(ssl, cb)
6378 SSL_set_msg_callback_arg(ssl, arg)
6380 to request calling a callback function
6382 void cb(int write_p, int version, int content_type,
6383 const void *buf, size_t len, SSL *ssl, void *arg)
6385 whenever a protocol message has been completely received
6386 (write_p == 0) or sent (write_p == 1). Here 'version' is the
6387 protocol version according to which the SSL library interprets
6388 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
6389 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
6390 the content type as defined in the SSL 3.0/TLS 1.0 protocol
6391 specification (change_cipher_spec(20), alert(21), handshake(22)).
6392 'buf' and 'len' point to the actual message, 'ssl' to the
6393 SSL object, and 'arg' is the application-defined value set by
6394 SSL[_CTX]_set_msg_callback_arg().
6396 'openssl s_client' and 'openssl s_server' have new '-msg' options
6397 to enable a callback that displays all protocol messages.
6400 *) Change the shared library support so shared libraries are built as
6401 soon as the corresponding static library is finished, and thereby get
6402 openssl and the test programs linked against the shared library.
6403 This still only happens when the keyword "shard" has been given to
6404 the configuration scripts.
6406 NOTE: shared library support is still an experimental thing, and
6407 backward binary compatibility is still not guaranteed.
6408 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
6410 *) Add support for Subject Information Access extension.
6411 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
6413 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
6414 additional bytes when new memory had to be allocated, not just
6415 when reusing an existing buffer.
6418 *) New command line and configuration option 'utf8' for the req command.
6419 This allows field values to be specified as UTF8 strings.
6422 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
6423 runs for the former and machine-readable output for the latter.
6426 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
6427 of the e-mail address in the DN (i.e., it will go into a certificate
6428 extension only). The new configuration file option 'email_in_dn = no'
6429 has the same effect.
6430 [Massimiliano Pala madwolf@openca.org]
6432 *) Change all functions with names starting with des_ to be starting
6433 with DES_ instead. Add wrappers that are compatible with libdes,
6434 but are named _ossl_old_des_*. Finally, add macros that map the
6435 des_* symbols to the corresponding _ossl_old_des_* if libdes
6436 compatibility is desired. If OpenSSL 0.9.6c compatibility is
6437 desired, the des_* symbols will be mapped to DES_*, with one
6440 Since we provide two compatibility mappings, the user needs to
6441 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
6442 compatibility is desired. The default (i.e., when that macro
6443 isn't defined) is OpenSSL 0.9.6c compatibility.
6445 There are also macros that enable and disable the support of old
6446 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
6447 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
6448 are defined, the default will apply: to support the old des routines.
6450 In either case, one must include openssl/des.h to get the correct
6451 definitions. Do not try to just include openssl/des_old.h, that
6454 NOTE: This is a major break of an old API into a new one. Software
6455 authors are encouraged to switch to the DES_ style functions. Some
6456 time in the future, des_old.h and the libdes compatibility functions
6457 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
6458 default), and then completely removed.
6461 *) Test for certificates which contain unsupported critical extensions.
6462 If such a certificate is found during a verify operation it is
6463 rejected by default: this behaviour can be overridden by either
6464 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
6465 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
6466 X509_supported_extension() has also been added which returns 1 if a
6467 particular extension is supported.
6470 *) Modify the behaviour of EVP cipher functions in similar way to digests
6471 to retain compatibility with existing code.
6474 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
6475 compatibility with existing code. In particular the 'ctx' parameter does
6476 not have to be to be initialized before the call to EVP_DigestInit() and
6477 it is tidied up after a call to EVP_DigestFinal(). New function
6478 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
6479 EVP_MD_CTX_copy() changed to not require the destination to be
6480 initialized valid and new function EVP_MD_CTX_copy_ex() added which
6481 requires the destination to be valid.
6483 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
6484 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
6487 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
6488 so that complete 'Handshake' protocol structures are kept in memory
6489 instead of overwriting 'msg_type' and 'length' with 'body' data.
6492 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
6493 [Massimo Santin via Richard Levitte]
6495 *) Major restructuring to the underlying ENGINE code. This includes
6496 reduction of linker bloat, separation of pure "ENGINE" manipulation
6497 (initialisation, etc) from functionality dealing with implementations
6498 of specific crypto iterfaces. This change also introduces integrated
6499 support for symmetric ciphers and digest implementations - so ENGINEs
6500 can now accelerate these by providing EVP_CIPHER and EVP_MD
6501 implementations of their own. This is detailed in crypto/engine/README
6502 as it couldn't be adequately described here. However, there are a few
6503 API changes worth noting - some RSA, DSA, DH, and RAND functions that
6504 were changed in the original introduction of ENGINE code have now
6505 reverted back - the hooking from this code to ENGINE is now a good
6506 deal more passive and at run-time, operations deal directly with
6507 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
6508 dereferencing through an ENGINE pointer any more. Also, the ENGINE
6509 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
6510 they were not being used by the framework as there is no concept of a
6511 BIGNUM_METHOD and they could not be generalised to the new
6512 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
6513 ENGINE_cpy() has been removed as it cannot be consistently defined in
6517 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
6520 *) Change mkdef.pl to sort symbols that get the same entry number,
6521 and make sure the automatically generated functions ERR_load_*
6522 become part of libeay.num as well.
6525 *) New function SSL_renegotiate_pending(). This returns true once
6526 renegotiation has been requested (either SSL_renegotiate() call
6527 or HelloRequest/ClientHello received from the peer) and becomes
6528 false once a handshake has been completed.
6529 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
6530 sends a HelloRequest, but does not ensure that a handshake takes
6531 place. SSL_renegotiate_pending() is useful for checking if the
6532 client has followed the request.)
6535 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
6536 By default, clients may request session resumption even during
6537 renegotiation (if session ID contexts permit); with this option,
6538 session resumption is possible only in the first handshake.
6540 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
6541 more bits available for options that should not be part of
6542 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
6545 *) Add some demos for certificate and certificate request creation.
6548 *) Make maximum certificate chain size accepted from the peer application
6549 settable (SSL*_get/set_max_cert_list()), as proposed by
6550 "Douglas E. Engert" <deengert@anl.gov>.
6553 *) Add support for shared libraries for Unixware-7
6554 (Boyd Lynn Gerber <gerberb@zenez.com>).
6557 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
6558 be done prior to destruction. Use this to unload error strings from
6559 ENGINEs that load their own error strings. NB: This adds two new API
6560 functions to "get" and "set" this destroy handler in an ENGINE.
6563 *) Alter all existing ENGINE implementations (except "openssl" and
6564 "openbsd") to dynamically instantiate their own error strings. This
6565 makes them more flexible to be built both as statically-linked ENGINEs
6566 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
6567 Also, add stub code to each that makes building them as self-contained
6568 shared-libraries easier (see README.ENGINE).
6571 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
6572 implementations into applications that are completely implemented in
6573 self-contained shared-libraries. The "dynamic" ENGINE exposes control
6574 commands that can be used to configure what shared-library to load and
6575 to control aspects of the way it is handled. Also, made an update to
6576 the README.ENGINE file that brings its information up-to-date and
6577 provides some information and instructions on the "dynamic" ENGINE
6578 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
6581 *) Make it possible to unload ranges of ERR strings with a new
6582 "ERR_unload_strings" function.
6585 *) Add a copy() function to EVP_MD.
6588 *) Make EVP_MD routines take a context pointer instead of just the
6589 md_data void pointer.
6592 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
6593 that the digest can only process a single chunk of data
6594 (typically because it is provided by a piece of
6595 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
6596 is only going to provide a single chunk of data, and hence the
6597 framework needn't accumulate the data for oneshot drivers.
6600 *) As with "ERR", make it possible to replace the underlying "ex_data"
6601 functions. This change also alters the storage and management of global
6602 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
6603 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
6604 index counters. The API functions that use this state have been changed
6605 to take a "class_index" rather than pointers to the class's local STACK
6606 and counter, and there is now an API function to dynamically create new
6607 classes. This centralisation allows us to (a) plug a lot of the
6608 thread-safety problems that existed, and (b) makes it possible to clean
6609 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
6610 such data would previously have always leaked in application code and
6611 workarounds were in place to make the memory debugging turn a blind eye
6612 to it. Application code that doesn't use this new function will still
6613 leak as before, but their memory debugging output will announce it now
6614 rather than letting it slide.
6616 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
6617 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
6618 has a return value to indicate success or failure.
6621 *) Make it possible to replace the underlying "ERR" functions such that the
6622 global state (2 LHASH tables and 2 locks) is only used by the "default"
6623 implementation. This change also adds two functions to "get" and "set"
6624 the implementation prior to it being automatically set the first time
6625 any other ERR function takes place. Ie. an application can call "get",
6626 pass the return value to a module it has just loaded, and that module
6627 can call its own "set" function using that value. This means the
6628 module's "ERR" operations will use (and modify) the error state in the
6629 application and not in its own statically linked copy of OpenSSL code.
6632 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
6633 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
6634 the operation, and provides a more encapsulated way for external code
6635 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
6636 to use these functions rather than manually incrementing the counts.
6638 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
6641 *) Add EVP test program.
6644 *) Add symmetric cipher support to ENGINE. Expect the API to change!
6647 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
6648 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
6649 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
6650 These allow a CRL to be built without having to access X509_CRL fields
6651 directly. Modify 'ca' application to use new functions.
6654 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
6655 bug workarounds. Rollback attack detection is a security feature.
6656 The problem will only arise on OpenSSL servers when TLSv1 is not
6657 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
6658 Software authors not wanting to support TLSv1 will have special reasons
6659 for their choice and can explicitly enable this option.
6660 [Bodo Moeller, Lutz Jaenicke]
6662 *) Rationalise EVP so it can be extended: don't include a union of
6663 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
6664 (similar to those existing for EVP_CIPHER_CTX).
6669 EVP_MD_CTX_init(&md); /* new function call */
6670 EVP_DigestInit(&md, EVP_sha1());
6671 EVP_DigestUpdate(&md, in, len);
6672 EVP_DigestFinal(&md, out, NULL);
6673 EVP_MD_CTX_cleanup(&md); /* new function call */
6677 *) Make DES key schedule conform to the usual scheme, as well as
6678 correcting its structure. This means that calls to DES functions
6679 now have to pass a pointer to a des_key_schedule instead of a
6680 plain des_key_schedule (which was actually always a pointer
6683 des_key_schedule ks;
6685 des_set_key_checked(..., &ks);
6686 des_ncbc_encrypt(..., &ks, ...);
6688 (Note that a later change renames 'des_...' into 'DES_...'.)
6691 *) Initial reduction of linker bloat: the use of some functions, such as
6692 PEM causes large amounts of unused functions to be linked in due to
6693 poor organisation. For example pem_all.c contains every PEM function
6694 which has a knock on effect of linking in large amounts of (unused)
6695 ASN1 code. Grouping together similar functions and splitting unrelated
6696 functions prevents this.
6699 *) Cleanup of EVP macros.
6702 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
6703 correct _ecb suffix.
6706 *) Add initial OCSP responder support to ocsp application. The
6707 revocation information is handled using the text based index
6708 use by the ca application. The responder can either handle
6709 requests generated internally, supplied in files (for example
6710 via a CGI script) or using an internal minimal server.
6713 *) Add configuration choices to get zlib compression for TLS.
6716 *) Changes to Kerberos SSL for RFC 2712 compliance:
6717 1. Implemented real KerberosWrapper, instead of just using
6718 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
6719 2. Implemented optional authenticator field of KerberosWrapper.
6721 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
6722 and authenticator structs; see crypto/krb5/.
6724 Generalized Kerberos calls to support multiple Kerberos libraries.
6725 [Vern Staats <staatsvr@asc.hpc.mil>,
6726 Jeffrey Altman <jaltman@columbia.edu>
6727 via Richard Levitte]
6729 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
6730 already does with RSA. testdsa.h now has 'priv_key/pub_key'
6731 values for each of the key sizes rather than having just
6732 parameters (and 'speed' generating keys each time).
6735 *) Speed up EVP routines.
6738 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
6739 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
6740 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
6741 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
6743 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
6744 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
6745 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
6748 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
6750 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
6753 *) Added the OS2-EMX target.
6754 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
6756 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
6757 to support NCONF routines in extension code. New function CONF_set_nconf()
6758 to allow functions which take an NCONF to also handle the old LHASH
6759 structure: this means that the old CONF compatible routines can be
6760 retained (in particular wrt extensions) without having to duplicate the
6761 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
6764 *) Enhance the general user interface with mechanisms for inner control
6765 and with possibilities to have yes/no kind of prompts.
6768 *) Change all calls to low level digest routines in the library and
6769 applications to use EVP. Add missing calls to HMAC_cleanup() and
6770 don't assume HMAC_CTX can be copied using memcpy().
6771 [Verdon Walker <VWalker@novell.com>, Steve Henson]
6773 *) Add the possibility to control engines through control names but with
6774 arbitrary arguments instead of just a string.
6775 Change the key loaders to take a UI_METHOD instead of a callback
6776 function pointer. NOTE: this breaks binary compatibility with earlier
6777 versions of OpenSSL [engine].
6778 Adapt the nCipher code for these new conditions and add a card insertion
6782 *) Enhance the general user interface with mechanisms to better support
6783 dialog box interfaces, application-defined prompts, the possibility
6784 to use defaults (for example default passwords from somewhere else)
6785 and interrupts/cancellations.
6788 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
6789 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
6792 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
6793 tidy up some unnecessarily weird code in 'sk_new()').
6794 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
6796 *) Change the key loading routines for ENGINEs to use the same kind
6797 callback (pem_password_cb) as all other routines that need this
6801 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
6802 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
6803 than this minimum value is recommended.
6806 *) New random seeder for OpenVMS, using the system process statistics
6807 that are easily reachable.
6810 *) Windows apparently can't transparently handle global
6811 variables defined in DLLs. Initialisations such as:
6813 const ASN1_ITEM *it = &ASN1_INTEGER_it;
6815 won't compile. This is used by the any applications that need to
6816 declare their own ASN1 modules. This was fixed by adding the option
6817 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
6818 needed for static libraries under Win32.
6821 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
6822 setting of purpose and trust fields. New X509_STORE trust and
6823 purpose functions and tidy up setting in other SSL functions.
6826 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
6827 structure. These are inherited by X509_STORE_CTX when it is
6828 initialised. This allows various defaults to be set in the
6829 X509_STORE structure (such as flags for CRL checking and custom
6830 purpose or trust settings) for functions which only use X509_STORE_CTX
6831 internally such as S/MIME.
6833 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
6834 trust settings if they are not set in X509_STORE. This allows X509_STORE
6835 purposes and trust (in S/MIME for example) to override any set by default.
6837 Add command line options for CRL checking to smime, s_client and s_server
6841 *) Initial CRL based revocation checking. If the CRL checking flag(s)
6842 are set then the CRL is looked up in the X509_STORE structure and
6843 its validity and signature checked, then if the certificate is found
6844 in the CRL the verify fails with a revoked error.
6846 Various new CRL related callbacks added to X509_STORE_CTX structure.
6848 Command line options added to 'verify' application to support this.
6850 This needs some additional work, such as being able to handle multiple
6851 CRLs with different times, extension based lookup (rather than just
6852 by subject name) and ultimately more complete V2 CRL extension
6856 *) Add a general user interface API (crypto/ui/). This is designed
6857 to replace things like des_read_password and friends (backward
6858 compatibility functions using this new API are provided).
6859 The purpose is to remove prompting functions from the DES code
6860 section as well as provide for prompting through dialog boxes in
6861 a window system and the like.
6864 *) Add "ex_data" support to ENGINE so implementations can add state at a
6865 per-structure level rather than having to store it globally.
6868 *) Make it possible for ENGINE structures to be copied when retrieved by
6869 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
6870 This causes the "original" ENGINE structure to act like a template,
6871 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
6872 operational state can be localised to each ENGINE structure, despite the
6873 fact they all share the same "methods". New ENGINE structures returned in
6874 this case have no functional references and the return value is the single
6875 structural reference. This matches the single structural reference returned
6876 by ENGINE_by_id() normally, when it is incremented on the pre-existing
6880 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
6881 needs to match any other type at all we need to manually clear the
6885 *) Changes to the "openssl engine" utility to include;
6886 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
6887 about an ENGINE's available control commands.
6888 - executing control commands from command line arguments using the
6889 '-pre' and '-post' switches. '-post' is only used if '-t' is
6890 specified and the ENGINE is successfully initialised. The syntax for
6891 the individual commands are colon-separated, for example;
6892 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
6895 *) New dynamic control command support for ENGINEs. ENGINEs can now
6896 declare their own commands (numbers), names (strings), descriptions,
6897 and input types for run-time discovery by calling applications. A
6898 subset of these commands are implicitly classed as "executable"
6899 depending on their input type, and only these can be invoked through
6900 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
6901 can be based on user input, config files, etc). The distinction is
6902 that "executable" commands cannot return anything other than a boolean
6903 result and can only support numeric or string input, whereas some
6904 discoverable commands may only be for direct use through
6905 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
6906 pointers, or other custom uses. The "executable" commands are to
6907 support parameterisations of ENGINE behaviour that can be
6908 unambiguously defined by ENGINEs and used consistently across any
6909 OpenSSL-based application. Commands have been added to all the
6910 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
6911 control over shared-library paths without source code alterations.
6914 *) Changed all ENGINE implementations to dynamically allocate their
6915 ENGINEs rather than declaring them statically. Apart from this being
6916 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
6917 this also allows the implementations to compile without using the
6918 internal engine_int.h header.
6921 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
6922 'const' value. Any code that should be able to modify a RAND_METHOD
6923 should already have non-const pointers to it (ie. they should only
6924 modify their own ones).
6927 *) Made a variety of little tweaks to the ENGINE code.
6928 - "atalla" and "ubsec" string definitions were moved from header files
6929 to C code. "nuron" string definitions were placed in variables
6930 rather than hard-coded - allowing parameterisation of these values
6931 later on via ctrl() commands.
6932 - Removed unused "#if 0"'d code.
6933 - Fixed engine list iteration code so it uses ENGINE_free() to release
6934 structural references.
6935 - Constified the RAND_METHOD element of ENGINE structures.
6936 - Constified various get/set functions as appropriate and added
6937 missing functions (including a catch-all ENGINE_cpy that duplicates
6938 all ENGINE values onto a new ENGINE except reference counts/state).
6939 - Removed NULL parameter checks in get/set functions. Setting a method
6940 or function to NULL is a way of cancelling out a previously set
6941 value. Passing a NULL ENGINE parameter is just plain stupid anyway
6942 and doesn't justify the extra error symbols and code.
6943 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
6944 flags from engine_int.h to engine.h.
6945 - Changed prototypes for ENGINE handler functions (init(), finish(),
6946 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
6949 *) Implement binary inversion algorithm for BN_mod_inverse in addition
6950 to the algorithm using long division. The binary algorithm can be
6951 used only if the modulus is odd. On 32-bit systems, it is faster
6952 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
6953 roughly 5-15% for 256-bit moduli), so we use it only for moduli
6954 up to 450 bits. In 64-bit environments, the binary algorithm
6955 appears to be advantageous for much longer moduli; here we use it
6956 for moduli up to 2048 bits.
6959 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
6960 could not support the combine flag in choice fields.
6963 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
6964 extensions from a certificate request to the certificate.
6967 *) Allow multiple 'certopt' and 'nameopt' options to be separated
6968 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
6969 file: this allows the display of the certificate about to be
6970 signed to be customised, to allow certain fields to be included
6971 or excluded and extension details. The old system didn't display
6972 multicharacter strings properly, omitted fields not in the policy
6973 and couldn't display additional details such as extensions.
6976 *) Function EC_POINTs_mul for multiple scalar multiplication
6977 of an arbitrary number of elliptic curve points
6978 \sum scalars[i]*points[i],
6979 optionally including the generator defined for the EC_GROUP:
6980 scalar*generator + \sum scalars[i]*points[i].
6982 EC_POINT_mul is a simple wrapper function for the typical case
6983 that the point list has just one item (besides the optional
6987 *) First EC_METHODs for curves over GF(p):
6989 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
6990 operations and provides various method functions that can also
6991 operate with faster implementations of modular arithmetic.
6993 EC_GFp_mont_method() reuses most functions that are part of
6994 EC_GFp_simple_method, but uses Montgomery arithmetic.
6996 [Bodo Moeller; point addition and point doubling
6997 implementation directly derived from source code provided by
6998 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
7000 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
7001 crypto/ec/ec_lib.c):
7003 Curves are EC_GROUP objects (with an optional group generator)
7004 based on EC_METHODs that are built into the library.
7006 Points are EC_POINT objects based on EC_GROUP objects.
7008 Most of the framework would be able to handle curves over arbitrary
7009 finite fields, but as there are no obvious types for fields other
7010 than GF(p), some functions are limited to that for now.
7013 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
7014 that the file contains a complete HTTP response.
7017 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
7018 change the def and num file printf format specifier from "%-40sXXX"
7019 to "%-39s XXX". The latter will always guarantee a space after the
7020 field while the former will cause them to run together if the field
7021 is 40 of more characters long.
7024 *) Constify the cipher and digest 'method' functions and structures
7025 and modify related functions to take constant EVP_MD and EVP_CIPHER
7029 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
7030 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
7033 *) Modify EVP_Digest*() routines so they now return values. Although the
7034 internal software routines can never fail additional hardware versions
7038 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
7040 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
7041 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
7044 ERR_R_NESTED_ASN1_ERROR
7046 ERR_R_MISSING_ASN1_EOS
7047 were 4 .. 9, conflicting with
7048 ERR_LIB_RSA (= ERR_R_RSA_LIB)
7050 ERR_LIB_PEM (= ERR_R_PEM_LIB).
7051 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
7053 Add new error code 'ERR_R_INTERNAL_ERROR'.
7056 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
7060 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
7061 sets the subject name for a new request or supersedes the
7062 subject name in a given request. Formats that can be parsed are
7063 'CN=Some Name, OU=myOU, C=IT'
7065 'CN=Some Name/OU=myOU/C=IT'.
7067 Add options '-batch' and '-verbose' to 'openssl req'.
7068 [Massimiliano Pala <madwolf@hackmasters.net>]
7070 *) Introduce the possibility to access global variables through
7071 functions on platform were that's the best way to handle exporting
7072 global variables in shared libraries. To enable this functionality,
7073 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
7074 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
7075 is normally done by Configure or something similar).
7077 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
7078 in the source file (foo.c) like this:
7080 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
7081 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
7083 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
7084 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
7086 OPENSSL_DECLARE_GLOBAL(int,foo);
7087 #define foo OPENSSL_GLOBAL_REF(foo)
7088 OPENSSL_DECLARE_GLOBAL(double,bar);
7089 #define bar OPENSSL_GLOBAL_REF(bar)
7091 The #defines are very important, and therefore so is including the
7092 header file everywhere where the defined globals are used.
7094 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
7095 of ASN.1 items, but that structure is a bit different.
7097 The largest change is in util/mkdef.pl which has been enhanced with
7098 better and easier to understand logic to choose which symbols should
7099 go into the Windows .def files as well as a number of fixes and code
7100 cleanup (among others, algorithm keywords are now sorted
7101 lexicographically to avoid constant rewrites).
7104 *) In BN_div() keep a copy of the sign of 'num' before writing the
7105 result to 'rm' because if rm==num the value will be overwritten
7106 and produce the wrong result if 'num' is negative: this caused
7107 problems with BN_mod() and BN_nnmod().
7110 *) Function OCSP_request_verify(). This checks the signature on an
7111 OCSP request and verifies the signer certificate. The signer
7112 certificate is just checked for a generic purpose and OCSP request
7116 *) Add OCSP_check_validity() function to check the validity of OCSP
7117 responses. OCSP responses are prepared in real time and may only
7118 be a few seconds old. Simply checking that the current time lies
7119 between thisUpdate and nextUpdate max reject otherwise valid responses
7120 caused by either OCSP responder or client clock inaccuracy. Instead
7121 we allow thisUpdate and nextUpdate to fall within a certain period of
7122 the current time. The age of the response can also optionally be
7123 checked. Two new options -validity_period and -status_age added to
7127 *) If signature or public key algorithm is unrecognized print out its
7128 OID rather that just UNKNOWN.
7131 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
7132 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
7133 ID to be generated from the issuer certificate alone which can then be
7134 passed to OCSP_id_issuer_cmp().
7137 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
7138 ASN1 modules to export functions returning ASN1_ITEM pointers
7139 instead of the ASN1_ITEM structures themselves. This adds several
7140 new macros which allow the underlying ASN1 function/structure to
7141 be accessed transparently. As a result code should not use ASN1_ITEM
7142 references directly (such as &X509_it) but instead use the relevant
7143 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
7144 use of the new ASN1 code on platforms where exporting structures
7145 is problematical (for example in shared libraries) but exporting
7146 functions returning pointers to structures is not.
7149 *) Add support for overriding the generation of SSL/TLS session IDs.
7150 These callbacks can be registered either in an SSL_CTX or per SSL.
7151 The purpose of this is to allow applications to control, if they wish,
7152 the arbitrary values chosen for use as session IDs, particularly as it
7153 can be useful for session caching in multiple-server environments. A
7154 command-line switch for testing this (and any client code that wishes
7155 to use such a feature) has been added to "s_server".
7156 [Geoff Thorpe, Lutz Jaenicke]
7158 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
7159 of the form '#if defined(...) || defined(...) || ...' and
7160 '#if !defined(...) && !defined(...) && ...'. This also avoids
7161 the growing number of special cases it was previously handling.
7164 *) Make all configuration macros available for application by making
7165 sure they are available in opensslconf.h, by giving them names starting
7166 with "OPENSSL_" to avoid conflicts with other packages and by making
7167 sure e_os2.h will cover all platform-specific cases together with
7169 Additionally, it is now possible to define configuration/platform-
7170 specific names (called "system identities"). In the C code, these
7171 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
7172 macro with the name beginning with "OPENSSL_SYS_", which is determined
7173 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
7177 *) New option -set_serial to 'req' and 'x509' this allows the serial
7178 number to use to be specified on the command line. Previously self
7179 signed certificates were hard coded with serial number 0 and the
7180 CA options of 'x509' had to use a serial number in a file which was
7184 *) New options to 'ca' utility to support V2 CRL entry extensions.
7185 Currently CRL reason, invalidity date and hold instruction are
7186 supported. Add new CRL extensions to V3 code and some new objects.
7189 *) New function EVP_CIPHER_CTX_set_padding() this is used to
7190 disable standard block padding (aka PKCS#5 padding) in the EVP
7191 API, which was previously mandatory. This means that the data is
7192 not padded in any way and so the total length much be a multiple
7193 of the block size, otherwise an error occurs.
7196 *) Initial (incomplete) OCSP SSL support.
7199 *) New function OCSP_parse_url(). This splits up a URL into its host,
7200 port and path components: primarily to parse OCSP URLs. New -url
7201 option to ocsp utility.
7204 *) New nonce behavior. The return value of OCSP_check_nonce() now
7205 reflects the various checks performed. Applications can decide
7206 whether to tolerate certain situations such as an absent nonce
7207 in a response when one was present in a request: the ocsp application
7208 just prints out a warning. New function OCSP_add1_basic_nonce()
7209 this is to allow responders to include a nonce in a response even if
7210 the request is nonce-less.
7213 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
7214 skipped when using openssl x509 multiple times on a single input file,
7215 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
7218 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
7219 set string type: to handle setting ASN1_TIME structures. Fix ca
7220 utility to correctly initialize revocation date of CRLs.
7223 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
7224 the clients preferred ciphersuites and rather use its own preferences.
7225 Should help to work around M$ SGC (Server Gated Cryptography) bug in
7226 Internet Explorer by ensuring unchanged hash method during stepup.
7227 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
7230 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
7231 to aes and add a new 'exist' option to print out symbols that don't
7235 *) Additional options to ocsp utility to allow flags to be set and
7236 additional certificates supplied.
7239 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
7240 OCSP client a number of certificate to only verify the response
7244 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
7245 handle the new API. Currently only ECB, CBC modes supported. Add new
7248 Add TLS AES ciphersuites as described in RFC3268, "Advanced
7249 Encryption Standard (AES) Ciphersuites for Transport Layer
7250 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
7251 not enabled by default and were not part of the "ALL" ciphersuite
7252 alias because they were not yet official; they could be
7253 explicitly requested by specifying the "AESdraft" ciphersuite
7254 group alias. In the final release of OpenSSL 0.9.7, the group
7255 alias is called "AES" and is part of "ALL".)
7256 [Ben Laurie, Steve Henson, Bodo Moeller]
7258 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
7259 request to response.
7262 *) Functions for OCSP responders. OCSP_request_onereq_count(),
7263 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
7264 extract information from a certificate request. OCSP_response_create()
7265 creates a response and optionally adds a basic response structure.
7266 OCSP_basic_add1_status() adds a complete single response to a basic
7267 response and returns the OCSP_SINGLERESP structure just added (to allow
7268 extensions to be included for example). OCSP_basic_add1_cert() adds a
7269 certificate to a basic response and OCSP_basic_sign() signs a basic
7270 response with various flags. New helper functions ASN1_TIME_check()
7271 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
7272 (converts ASN1_TIME to GeneralizedTime).
7275 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
7276 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
7277 structure from a certificate. X509_pubkey_digest() digests the public_key
7278 contents: this is used in various key identifiers.
7281 *) Make sk_sort() tolerate a NULL argument.
7282 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
7284 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
7285 passed by the function are trusted implicitly. If any of them signed the
7286 response then it is assumed to be valid and is not verified.
7289 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
7290 to data. This was previously part of the PKCS7 ASN1 code. This
7291 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
7292 [Steve Henson, reported by Kenneth R. Robinette
7293 <support@securenetterm.com>]
7295 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
7296 routines: without these tracing memory leaks is very painful.
7297 Fix leaks in PKCS12 and PKCS7 routines.
7300 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
7301 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
7302 effectively meant GeneralizedTime would never be used. Now it
7303 is initialised to -1 but X509_time_adj() now has to check the value
7304 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
7305 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
7306 [Steve Henson, reported by Kenneth R. Robinette
7307 <support@securenetterm.com>]
7309 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
7310 result in a zero length in the ASN1_INTEGER structure which was
7311 not consistent with the structure when d2i_ASN1_INTEGER() was used
7312 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
7313 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
7314 where it did not print out a minus for negative ASN1_INTEGER.
7317 *) Add summary printout to ocsp utility. The various functions which
7318 convert status values to strings have been renamed to:
7319 OCSP_response_status_str(), OCSP_cert_status_str() and
7320 OCSP_crl_reason_str() and are no longer static. New options
7321 to verify nonce values and to disable verification. OCSP response
7322 printout format cleaned up.
7325 *) Add additional OCSP certificate checks. These are those specified
7326 in RFC2560. This consists of two separate checks: the CA of the
7327 certificate being checked must either be the OCSP signer certificate
7328 or the issuer of the OCSP signer certificate. In the latter case the
7329 OCSP signer certificate must contain the OCSP signing extended key
7330 usage. This check is performed by attempting to match the OCSP
7331 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
7332 in the OCSP_CERTID structures of the response.
7335 *) Initial OCSP certificate verification added to OCSP_basic_verify()
7336 and related routines. This uses the standard OpenSSL certificate
7337 verify routines to perform initial checks (just CA validity) and
7338 to obtain the certificate chain. Then additional checks will be
7339 performed on the chain. Currently the root CA is checked to see
7340 if it is explicitly trusted for OCSP signing. This is used to set
7341 a root CA as a global signing root: that is any certificate that
7342 chains to that CA is an acceptable OCSP signing certificate.
7345 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
7346 extensions from a separate configuration file.
7347 As when reading extensions from the main configuration file,
7348 the '-extensions ...' option may be used for specifying the
7350 [Massimiliano Pala <madwolf@comune.modena.it>]
7352 *) New OCSP utility. Allows OCSP requests to be generated or
7353 read. The request can be sent to a responder and the output
7354 parsed, outputed or printed in text form. Not complete yet:
7355 still needs to check the OCSP response validity.
7358 *) New subcommands for 'openssl ca':
7359 'openssl ca -status <serial>' prints the status of the cert with
7360 the given serial number (according to the index file).
7361 'openssl ca -updatedb' updates the expiry status of certificates
7363 [Massimiliano Pala <madwolf@comune.modena.it>]
7365 *) New '-newreq-nodes' command option to CA.pl. This is like
7366 '-newreq', but calls 'openssl req' with the '-nodes' option
7367 so that the resulting key is not encrypted.
7368 [Damien Miller <djm@mindrot.org>]
7370 *) New configuration for the GNU Hurd.
7371 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
7373 *) Initial code to implement OCSP basic response verify. This
7374 is currently incomplete. Currently just finds the signer's
7375 certificate and verifies the signature on the response.
7378 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
7379 value of OPENSSLDIR. This is available via the new '-d' option
7380 to 'openssl version', and is also included in 'openssl version -a'.
7383 *) Allowing defining memory allocation callbacks that will be given
7384 file name and line number information in additional arguments
7385 (a const char* and an int). The basic functionality remains, as
7386 well as the original possibility to just replace malloc(),
7387 realloc() and free() by functions that do not know about these
7388 additional arguments. To register and find out the current
7389 settings for extended allocation functions, the following
7390 functions are provided:
7392 CRYPTO_set_mem_ex_functions
7393 CRYPTO_set_locked_mem_ex_functions
7394 CRYPTO_get_mem_ex_functions
7395 CRYPTO_get_locked_mem_ex_functions
7397 These work the same way as CRYPTO_set_mem_functions and friends.
7398 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
7399 extended allocation function is enabled.
7400 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
7401 a conventional allocation function is enabled.
7402 [Richard Levitte, Bodo Moeller]
7404 *) Finish off removing the remaining LHASH function pointer casts.
7405 There should no longer be any prototype-casting required when using
7406 the LHASH abstraction, and any casts that remain are "bugs". See
7407 the callback types and macros at the head of lhash.h for details
7408 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
7411 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
7412 If /dev/[u]random devices are not available or do not return enough
7413 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
7415 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
7416 /etc/entropy will be queried once each in this sequence, querying stops
7417 when enough entropy was collected without querying more sockets.
7420 *) Change the Unix RAND_poll() variant to be able to poll several
7421 random devices, as specified by DEVRANDOM, until a sufficient amount
7422 of data has been collected. We spend at most 10 ms on each file
7423 (select timeout) and read in non-blocking mode. DEVRANDOM now
7424 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
7425 (previously it was just the string "/dev/urandom"), so on typical
7426 platforms the 10 ms delay will never occur.
7427 Also separate out the Unix variant to its own file, rand_unix.c.
7428 For VMS, there's a currently-empty rand_vms.c.
7431 *) Move OCSP client related routines to ocsp_cl.c. These
7432 provide utility functions which an application needing
7433 to issue a request to an OCSP responder and analyse the
7434 response will typically need: as opposed to those which an
7435 OCSP responder itself would need which will be added later.
7437 OCSP_request_sign() signs an OCSP request with an API similar
7438 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
7439 response. OCSP_response_get1_basic() extracts basic response
7440 from response. OCSP_resp_find_status(): finds and extracts status
7441 information from an OCSP_CERTID structure (which will be created
7442 when the request structure is built). These are built from lower
7443 level functions which work on OCSP_SINGLERESP structures but
7444 won't normally be used unless the application wishes to examine
7445 extensions in the OCSP response for example.
7447 Replace nonce routines with a pair of functions.
7448 OCSP_request_add1_nonce() adds a nonce value and optionally
7449 generates a random value. OCSP_check_nonce() checks the
7450 validity of the nonce in an OCSP response.
7453 *) Change function OCSP_request_add() to OCSP_request_add0_id().
7454 This doesn't copy the supplied OCSP_CERTID and avoids the
7455 need to free up the newly created id. Change return type
7456 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
7457 This can then be used to add extensions to the request.
7458 Deleted OCSP_request_new(), since most of its functionality
7459 is now in OCSP_REQUEST_new() (and the case insensitive name
7460 clash) apart from the ability to set the request name which
7461 will be added elsewhere.
7464 *) Update OCSP API. Remove obsolete extensions argument from
7465 various functions. Extensions are now handled using the new
7466 OCSP extension code. New simple OCSP HTTP function which
7467 can be used to send requests and parse the response.
7470 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
7471 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
7472 uses the special reorder version of SET OF to sort the attributes
7473 and reorder them to match the encoded order. This resolves a long
7474 standing problem: a verify on a PKCS7 structure just after signing
7475 it used to fail because the attribute order did not match the
7476 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
7477 it uses the received order. This is necessary to tolerate some broken
7478 software that does not order SET OF. This is handled by encoding
7479 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
7480 to produce the required SET OF.
7483 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
7484 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
7485 files to get correct declarations of the ASN.1 item variables.
7488 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
7489 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
7490 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
7491 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
7492 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
7493 ASN1_ITEM and no wrapper functions.
7496 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
7497 replace the old function pointer based I/O routines. Change most of
7498 the *_d2i_bio() and *_d2i_fp() functions to use these.
7501 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
7502 lines, recognice more "algorithms" that can be deselected, and make
7503 it complain about algorithm deselection that isn't recognised.
7506 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
7507 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
7508 to use new functions. Add NO_ASN1_OLD which can be set to remove
7509 some old style ASN1 functions: this can be used to determine if old
7510 code will still work when these eventually go away.
7513 *) New extension functions for OCSP structures, these follow the
7514 same conventions as certificates and CRLs.
7517 *) New function X509V3_add1_i2d(). This automatically encodes and
7518 adds an extension. Its behaviour can be customised with various
7519 flags to append, replace or delete. Various wrappers added for
7520 certificates and CRLs.
7523 *) Fix to avoid calling the underlying ASN1 print routine when
7524 an extension cannot be parsed. Correct a typo in the
7525 OCSP_SERVICELOC extension. Tidy up print OCSP format.
7528 *) Make mkdef.pl parse some of the ASN1 macros and add appropriate
7529 entries for variables.
7532 *) Add functionality to apps/openssl.c for detecting locking
7533 problems: As the program is single-threaded, all we have
7534 to do is register a locking callback using an array for
7535 storing which locks are currently held by the program.
7538 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
7539 SSL_get_ex_data_X509_STORE_idx(), which is used in
7540 ssl_verify_cert_chain() and thus can be called at any time
7541 during TLS/SSL handshakes so that thread-safety is essential.
7542 Unfortunately, the ex_data design is not at all suited
7543 for multi-threaded use, so it probably should be abolished.
7546 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
7547 [Broadcom, tweaked and integrated by Geoff Thorpe]
7549 *) Move common extension printing code to new function
7550 X509V3_print_extensions(). Reorganise OCSP print routines and
7551 implement some needed OCSP ASN1 functions. Add OCSP extensions.
7554 *) New function X509_signature_print() to remove duplication in some
7558 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
7559 set (this was treated exactly the same as SET OF previously). This
7560 is used to reorder the STACK representing the structure to match the
7561 encoding. This will be used to get round a problem where a PKCS7
7562 structure which was signed could not be verified because the STACK
7563 order did not reflect the encoded order.
7566 *) Reimplement the OCSP ASN1 module using the new code.
7569 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
7570 for its ASN1 operations. The old style function pointers still exist
7571 for now but they will eventually go away.
7574 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
7575 completely replaces the old ASN1 functionality with a table driven
7576 encoder and decoder which interprets an ASN1_ITEM structure describing
7577 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
7578 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
7579 has also been converted to the new form.
7582 *) Change BN_mod_exp_recp so that negative moduli are tolerated
7583 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
7584 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
7585 for negative moduli.
7588 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
7589 of not touching the result's sign bit.
7592 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
7596 *) Changed the LHASH code to use prototypes for callbacks, and created
7597 macros to declare and implement thin (optionally static) functions
7598 that provide type-safety and avoid function pointer casting for the
7599 type-specific callbacks.
7602 *) Added Kerberos Cipher Suites to be used with TLS, as written in
7604 [Veers Staats <staatsvr@asc.hpc.mil>,
7605 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
7607 *) Reformat the FAQ so the different questions and answers can be divided
7608 in sections depending on the subject.
7611 *) Have the zlib compression code load ZLIB.DLL dynamically under
7615 *) New function BN_mod_sqrt for computing square roots modulo a prime
7616 (using the probabilistic Tonelli-Shanks algorithm unless
7617 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
7618 be handled deterministically).
7619 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7621 *) Make BN_mod_inverse faster by explicitly handling small quotients
7622 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
7623 512 bits], about 30% for larger ones [1024 or 2048 bits].)
7626 *) New function BN_kronecker.
7629 *) Fix BN_gcd so that it works on negative inputs; the result is
7630 positive unless both parameters are zero.
7631 Previously something reasonably close to an infinite loop was
7632 possible because numbers could be growing instead of shrinking
7633 in the implementation of Euclid's algorithm.
7636 *) Fix BN_is_word() and BN_is_one() macros to take into account the
7637 sign of the number in question.
7639 Fix BN_is_word(a,w) to work correctly for w == 0.
7641 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
7642 because its test if the absolute value of 'a' equals 'w'.
7643 Note that BN_abs_is_word does *not* handle w == 0 reliably;
7644 it exists mostly for use in the implementations of BN_is_zero(),
7645 BN_is_one(), and BN_is_word().
7648 *) New function BN_swap.
7651 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
7652 the exponentiation functions are more likely to produce reasonable
7653 results on negative inputs.
7656 *) Change BN_mod_mul so that the result is always non-negative.
7657 Previously, it could be negative if one of the factors was negative;
7658 I don't think anyone really wanted that behaviour.
7661 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
7662 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
7663 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
7664 and add new functions:
7673 BN_mod_lshift1_quick
7677 These functions always generate non-negative results.
7679 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
7680 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
7682 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
7683 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
7684 be reduced modulo m.
7685 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7688 The following entry accidentally appeared in the CHANGES file
7689 distributed with OpenSSL 0.9.7. The modifications described in
7690 it do *not* apply to OpenSSL 0.9.7.
7692 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
7693 was actually never needed) and in BN_mul(). The removal in BN_mul()
7694 required a small change in bn_mul_part_recursive() and the addition
7695 of the functions bn_cmp_part_words(), bn_sub_part_words() and
7696 bn_add_part_words(), which do the same thing as bn_cmp_words(),
7697 bn_sub_words() and bn_add_words() except they take arrays with
7702 *) In 'openssl passwd', verify passwords read from the terminal
7703 unless the '-salt' option is used (which usually means that
7704 verification would just waste user's time since the resulting
7705 hash is going to be compared with some given password hash)
7706 or the new '-noverify' option is used.
7708 This is an incompatible change, but it does not affect
7709 non-interactive use of 'openssl passwd' (passwords on the command
7710 line, '-stdin' option, '-in ...' option) and thus should not
7714 *) Remove all references to RSAref, since there's no more need for it.
7717 *) Make DSO load along a path given through an environment variable
7718 (SHLIB_PATH) with shl_load().
7721 *) Constify the ENGINE code as a result of BIGNUM constification.
7722 Also constify the RSA code and most things related to it. In a
7723 few places, most notable in the depth of the ASN.1 code, ugly
7724 casts back to non-const were required (to be solved at a later
7728 *) Make it so the openssl application has all engines loaded by default.
7731 *) Constify the BIGNUM routines a little more.
7734 *) Add the following functions:
7736 ENGINE_load_cswift()
7738 ENGINE_load_atalla()
7740 ENGINE_load_builtin_engines()
7742 That way, an application can itself choose if external engines that
7743 are built-in in OpenSSL shall ever be used or not. The benefit is
7744 that applications won't have to be linked with libdl or other dso
7745 libraries unless it's really needed.
7747 Changed 'openssl engine' to load all engines on demand.
7748 Changed the engine header files to avoid the duplication of some
7749 declarations (they differed!).
7752 *) 'openssl engine' can now list capabilities.
7755 *) Better error reporting in 'openssl engine'.
7758 *) Never call load_dh_param(NULL) in s_server.
7761 *) Add engine application. It can currently list engines by name and
7762 identity, and test if they are actually available.
7765 *) Improve RPM specification file by forcing symbolic linking and making
7766 sure the installed documentation is also owned by root.root.
7767 [Damien Miller <djm@mindrot.org>]
7769 *) Give the OpenSSL applications more possibilities to make use of
7770 keys (public as well as private) handled by engines.
7773 *) Add OCSP code that comes from CertCo.
7776 *) Add VMS support for the Rijndael code.
7779 *) Added untested support for Nuron crypto accelerator.
7782 *) Add support for external cryptographic devices. This code was
7783 previously distributed separately as the "engine" branch.
7784 [Geoff Thorpe, Richard Levitte]
7786 *) Rework the filename-translation in the DSO code. It is now possible to
7787 have far greater control over how a "name" is turned into a filename
7788 depending on the operating environment and any oddities about the
7789 different shared library filenames on each system.
7792 *) Support threads on FreeBSD-elf in Configure.
7795 *) Fix for SHA1 assembly problem with MASM: it produces
7796 warnings about corrupt line number information when assembling
7797 with debugging information. This is caused by the overlapping
7799 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
7802 NCONF_get_number() has no error checking at all. As a replacement,
7803 NCONF_get_number_e() is defined (_e for "error checking") and is
7804 promoted strongly. The old NCONF_get_number is kept around for
7805 binary backward compatibility.
7806 Make it possible for methods to load from something other than a BIO,
7807 by providing a function pointer that is given a name instead of a BIO.
7808 For example, this could be used to load configuration data from an
7812 *) Fix for non blocking accept BIOs. Added new I/O special reason
7813 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
7814 with non blocking I/O was not possible because no retry code was
7815 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
7819 *) Added the beginnings of Rijndael support.
7822 *) Fix for bug in DirectoryString mask setting. Add support for
7823 X509_NAME_print_ex() in 'req' and X509_print_ex() function
7824 to allow certificate printing to more controllable, additional
7825 'certopt' option to 'x509' to allow new printing options to be
7829 *) Clean old EAY MD5 hack from e_os.h.
7832 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
7834 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
7835 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
7836 [Joe Orton, Steve Henson]
7838 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
7840 *) Fix additional bug revealed by the NISCC test suite:
7842 Stop bug triggering large recursion when presented with
7843 certain ASN.1 tags (CVE-2003-0851)
7846 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
7848 *) Fix various bugs revealed by running the NISCC test suite:
7850 Stop out of bounds reads in the ASN1 code when presented with
7851 invalid tags (CVE-2003-0543 and CVE-2003-0544).
7853 If verify callback ignores invalid public key errors don't try to check
7854 certificate signature with the NULL public key.
7858 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
7859 if the server requested one: as stated in TLS 1.0 and SSL 3.0
7863 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
7864 extra data after the compression methods not only for TLS 1.0
7865 but also for SSL 3.0 (as required by the specification).
7866 [Bodo Moeller; problem pointed out by Matthias Loepfe]
7868 *) Change X509_certificate_type() to mark the key as exported/exportable
7869 when it's 512 *bits* long, not 512 bytes.
7872 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
7874 *) Countermeasure against the Klima-Pokorny-Rosa extension of
7875 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
7876 a protocol version number mismatch like a decryption error
7877 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
7880 *) Turn on RSA blinding by default in the default implementation
7881 to avoid a timing attack. Applications that don't want it can call
7882 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
7883 They would be ill-advised to do so in most cases.
7884 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
7886 *) Change RSA blinding code so that it works when the PRNG is not
7887 seeded (in this case, the secret RSA exponent is abused as
7888 an unpredictable seed -- if it is not unpredictable, there
7889 is no point in blinding anyway). Make RSA blinding thread-safe
7890 by remembering the creator's thread ID in rsa->blinding and
7891 having all other threads use local one-time blinding factors
7892 (this requires more computation than sharing rsa->blinding, but
7893 avoids excessive locking; and if an RSA object is not shared
7894 between threads, blinding will still be very fast).
7897 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
7899 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
7900 via timing by performing a MAC computation even if incorrrect
7901 block cipher padding has been found. This is a countermeasure
7902 against active attacks where the attacker has to distinguish
7903 between bad padding and a MAC verification error. (CVE-2003-0078)
7905 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
7906 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
7907 Martin Vuagnoux (EPFL, Ilion)]
7909 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
7911 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
7912 memory from it's contents. This is done with a counter that will
7913 place alternating values in each byte. This can be used to solve
7914 two issues: 1) the removal of calls to memset() by highly optimizing
7915 compilers, and 2) cleansing with other values than 0, since those can
7916 be read through on certain media, for example a swap space on disk.
7919 *) Bugfix: client side session caching did not work with external caching,
7920 because the session->cipher setting was not restored when reloading
7921 from the external cache. This problem was masked, when
7922 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
7923 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
7926 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
7927 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
7928 [Zeev Lieber <zeev-l@yahoo.com>]
7930 *) Undo an undocumented change introduced in 0.9.6e which caused
7931 repeated calls to OpenSSL_add_all_ciphers() and
7932 OpenSSL_add_all_digests() to be ignored, even after calling
7936 *) Change the default configuration reader to deal with last line not
7937 being properly terminated.
7940 *) Change X509_NAME_cmp() so it applies the special rules on handling
7941 DN values that are of type PrintableString, as well as RDNs of type
7942 emailAddress where the value has the type ia5String.
7943 [stefank@valicert.com via Richard Levitte]
7945 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
7946 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
7947 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
7948 the bitwise-OR of the two for use by the majority of applications
7949 wanting this behaviour, and update the docs. The documented
7950 behaviour and actual behaviour were inconsistent and had been
7951 changing anyway, so this is more a bug-fix than a behavioural
7953 [Geoff Thorpe, diagnosed by Nadav Har'El]
7955 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
7956 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
7959 *) Fix initialization code race conditions in
7960 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
7961 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
7962 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
7963 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
7964 ssl2_get_cipher_by_char(),
7965 ssl3_get_cipher_by_char().
7966 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
7968 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
7969 the cached sessions are flushed, as the remove_cb() might use ex_data
7970 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
7971 (see [openssl.org #212]).
7972 [Geoff Thorpe, Lutz Jaenicke]
7974 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
7975 length, instead of the encoding length to d2i_ASN1_OBJECT.
7978 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
7980 *) [In 0.9.6g-engine release:]
7981 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
7982 [Lynn Gazis <lgazis@rainbow.com>]
7984 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
7986 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
7987 and get fix the header length calculation.
7988 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
7989 Alon Kantor <alonk@checkpoint.com> (and others),
7992 *) Use proper error handling instead of 'assertions' in buffer
7993 overflow checks added in 0.9.6e. This prevents DoS (the
7994 assertions could call abort()).
7995 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
7997 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
7999 *) Add various sanity checks to asn1_get_length() to reject
8000 the ASN1 length bytes if they exceed sizeof(long), will appear
8001 negative or the content length exceeds the length of the
8003 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
8005 *) Fix cipher selection routines: ciphers without encryption had no flags
8006 for the cipher strength set and where therefore not handled correctly
8007 by the selection routines (PR #130).
8010 *) Fix EVP_dsa_sha macro.
8014 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
8015 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
8016 that was added in OpenSSL 0.9.6d.
8018 As the countermeasure turned out to be incompatible with some
8019 broken SSL implementations, the new option is part of SSL_OP_ALL.
8020 SSL_OP_ALL is usually employed when compatibility with weird SSL
8021 implementations is desired (e.g. '-bugs' option to 's_client' and
8022 's_server'), so the new option is automatically set in many
8026 *) Changes in security patch:
8028 Changes marked "(CHATS)" were sponsored by the Defense Advanced
8029 Research Projects Agency (DARPA) and Air Force Research Laboratory,
8030 Air Force Materiel Command, USAF, under agreement number
8033 *) Add various sanity checks to asn1_get_length() to reject
8034 the ASN1 length bytes if they exceed sizeof(long), will appear
8035 negative or the content length exceeds the length of the
8036 supplied buffer. (CVE-2002-0659)
8037 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
8039 *) Assertions for various potential buffer overflows, not known to
8041 [Ben Laurie (CHATS)]
8043 *) Various temporary buffers to hold ASCII versions of integers were
8044 too small for 64 bit platforms. (CVE-2002-0655)
8045 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
8047 *) Remote buffer overflow in SSL3 protocol - an attacker could
8048 supply an oversized session ID to a client. (CVE-2002-0656)
8049 [Ben Laurie (CHATS)]
8051 *) Remote buffer overflow in SSL2 protocol - an attacker could
8052 supply an oversized client master key. (CVE-2002-0656)
8053 [Ben Laurie (CHATS)]
8055 Changes between 0.9.6c and 0.9.6d [9 May 2002]
8057 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
8058 encoded as NULL) with id-dsa-with-sha1.
8059 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
8061 *) Check various X509_...() return values in apps/req.c.
8062 [Nils Larsch <nla@trustcenter.de>]
8064 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
8065 an end-of-file condition would erroneously be flagged, when the CRLF
8066 was just at the end of a processed block. The bug was discovered when
8067 processing data through a buffering memory BIO handing the data to a
8068 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
8069 <ptsekov@syntrex.com> and Nedelcho Stanev.
8072 *) Implement a countermeasure against a vulnerability recently found
8073 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
8074 before application data chunks to avoid the use of known IVs
8075 with data potentially chosen by the attacker.
8078 *) Fix length checks in ssl3_get_client_hello().
8081 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
8082 to prevent ssl3_read_internal() from incorrectly assuming that
8083 ssl3_read_bytes() found application data while handshake
8084 processing was enabled when in fact s->s3->in_read_app_data was
8085 merely automatically cleared during the initial handshake.
8086 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
8088 *) Fix object definitions for Private and Enterprise: they were not
8089 recognized in their shortname (=lowercase) representation. Extend
8090 obj_dat.pl to issue an error when using undefined keywords instead
8091 of silently ignoring the problem (Svenning Sorensen
8092 <sss@sss.dnsalias.net>).
8095 *) Fix DH_generate_parameters() so that it works for 'non-standard'
8096 generators, i.e. generators other than 2 and 5. (Previously, the
8097 code did not properly initialise the 'add' and 'rem' values to
8098 BN_generate_prime().)
8100 In the new general case, we do not insist that 'generator' is
8101 actually a primitive root: This requirement is rather pointless;
8102 a generator of the order-q subgroup is just as good, if not
8106 *) Map new X509 verification errors to alerts. Discovered and submitted by
8107 Tom Wu <tom@arcot.com>.
8110 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
8111 returning non-zero before the data has been completely received
8112 when using non-blocking I/O.
8113 [Bodo Moeller; problem pointed out by John Hughes]
8115 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
8116 [Ben Laurie, Lutz Jaenicke]
8118 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
8119 Yoram Zahavi <YoramZ@gilian.com>).
8122 *) Add information about CygWin 1.3 and on, and preserve proper
8123 configuration for the versions before that.
8124 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
8126 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
8127 check whether we deal with a copy of a session and do not delete from
8128 the cache in this case. Problem reported by "Izhar Shoshani Levi"
8129 <izhar@checkpoint.com>.
8132 *) Do not store session data into the internal session cache, if it
8133 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
8134 flag is set). Proposed by Aslam <aslam@funk.com>.
8137 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
8141 *) [In 0.9.6d-engine release:]
8142 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
8143 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
8145 *) Add the configuration target linux-s390x.
8146 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
8148 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
8149 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
8150 variable as an indication that a ClientHello message has been
8151 received. As the flag value will be lost between multiple
8152 invocations of ssl3_accept when using non-blocking I/O, the
8153 function may not be aware that a handshake has actually taken
8154 place, thus preventing a new session from being added to the
8157 To avoid this problem, we now set s->new_session to 2 instead of
8158 using a local variable.
8159 [Lutz Jaenicke, Bodo Moeller]
8161 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
8162 if the SSL_R_LENGTH_MISMATCH error is detected.
8163 [Geoff Thorpe, Bodo Moeller]
8165 *) New 'shared_ldflag' column in Configure platform table.
8168 *) Fix EVP_CIPHER_mode macro.
8169 ["Dan S. Camper" <dan@bti.net>]
8171 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
8172 type, we must throw them away by setting rr->length to 0.
8173 [D P Chang <dpc@qualys.com>]
8175 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
8177 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
8178 <Dominikus.Scherkl@biodata.com>. (The previous implementation
8179 worked incorrectly for those cases where range = 10..._2 and
8180 3*range is two bits longer than range.)
8183 *) Only add signing time to PKCS7 structures if it is not already
8187 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
8188 OBJ_ld_ce should be OBJ_id_ce.
8189 Also some ip-pda OIDs in crypto/objects/objects.txt were
8190 incorrect (cf. RFC 3039).
8191 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
8193 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
8194 returns early because it has nothing to do.
8195 [Andy Schneider <andy.schneider@bjss.co.uk>]
8197 *) [In 0.9.6c-engine release:]
8198 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
8199 [Andy Schneider <andy.schneider@bjss.co.uk>]
8201 *) [In 0.9.6c-engine release:]
8202 Add support for Cryptographic Appliance's keyserver technology.
8203 (Use engine 'keyclient')
8204 [Cryptographic Appliances and Geoff Thorpe]
8206 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
8207 is called via tools/c89.sh because arguments have to be
8208 rearranged (all '-L' options must appear before the first object
8210 [Richard Shapiro <rshapiro@abinitio.com>]
8212 *) [In 0.9.6c-engine release:]
8213 Add support for Broadcom crypto accelerator cards, backported
8215 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
8217 *) [In 0.9.6c-engine release:]
8218 Add support for SureWare crypto accelerator cards from
8219 Baltimore Technologies. (Use engine 'sureware')
8220 [Baltimore Technologies and Mark Cox]
8222 *) [In 0.9.6c-engine release:]
8223 Add support for crypto accelerator cards from Accelerated
8224 Encryption Processing, www.aep.ie. (Use engine 'aep')
8225 [AEP Inc. and Mark Cox]
8227 *) Add a configuration entry for gcc on UnixWare.
8228 [Gary Benson <gbenson@redhat.com>]
8230 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
8231 messages are stored in a single piece (fixed-length part and
8232 variable-length part combined) and fix various bugs found on the way.
8235 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
8236 instead. BIO_gethostbyname() does not know what timeouts are
8237 appropriate, so entries would stay in cache even when they have
8239 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
8241 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
8242 faced with a pathologically small ClientHello fragment that does
8243 not contain client_version: Instead of aborting with an error,
8244 simply choose the highest available protocol version (i.e.,
8245 TLS 1.0 unless it is disabled). In practice, ClientHello
8246 messages are never sent like this, but this change gives us
8247 strictly correct behaviour at least for TLS.
8250 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
8251 never resets s->method to s->ctx->method when called from within
8252 one of the SSL handshake functions.
8253 [Bodo Moeller; problem pointed out by Niko Baric]
8255 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
8256 (sent using the client's version number) if client_version is
8257 smaller than the protocol version in use. Also change
8258 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
8259 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
8260 the client will at least see that alert.
8263 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
8267 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
8268 client receives HelloRequest while in a handshake.
8269 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
8271 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
8272 should end in 'break', not 'goto end' which circumvents various
8273 cleanups done in state SSL_ST_OK. But session related stuff
8274 must be disabled for SSL_ST_OK in the case that we just sent a
8277 Also avoid some overhead by not calling ssl_init_wbio_buffer()
8278 before just sending a HelloRequest.
8279 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
8281 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
8282 reveal whether illegal block cipher padding was found or a MAC
8283 verification error occurred. (Neither SSLerr() codes nor alerts
8284 are directly visible to potential attackers, but the information
8285 may leak via logfiles.)
8287 Similar changes are not required for the SSL 2.0 implementation
8288 because the number of padding bytes is sent in clear for SSL 2.0,
8289 and the extra bytes are just ignored. However ssl/s2_pkt.c
8290 failed to verify that the purported number of padding bytes is in
8294 *) Add OpenUNIX-8 support including shared libraries
8295 (Boyd Lynn Gerber <gerberb@zenez.com>).
8298 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
8299 'wristwatch attack' using huge encoding parameters (cf.
8300 James H. Manger's CRYPTO 2001 paper). Note that the
8301 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
8302 encoding parameters and hence was not vulnerable.
8305 *) BN_sqr() bug fix.
8306 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
8308 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
8309 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
8310 followed by modular reduction.
8311 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
8313 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
8314 equivalent based on BN_pseudo_rand() instead of BN_rand().
8317 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
8318 This function was broken, as the check for a new client hello message
8319 to handle SGC did not allow these large messages.
8320 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
8323 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
8326 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
8327 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
8330 *) Rework the configuration and shared library support for Tru64 Unix.
8331 The configuration part makes use of modern compiler features and
8332 still retains old compiler behavior for those that run older versions
8333 of the OS. The shared library support part includes a variant that
8334 uses the RPATH feature, and is available through the special
8335 configuration target "alpha-cc-rpath", which will never be selected
8337 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
8339 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
8340 with the same message size as in ssl3_get_certificate_request().
8341 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
8342 messages might inadvertently be reject as too long.
8343 [Petr Lampa <lampa@fee.vutbr.cz>]
8345 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
8348 *) Modified SSL library such that the verify_callback that has been set
8349 specificly for an SSL object with SSL_set_verify() is actually being
8350 used. Before the change, a verify_callback set with this function was
8351 ignored and the verify_callback() set in the SSL_CTX at the time of
8352 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
8353 to allow the necessary settings.
8356 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
8357 explicitly to NULL, as at least on Solaris 8 this seems not always to be
8358 done automatically (in contradiction to the requirements of the C
8359 standard). This made problems when used from OpenSSH.
8362 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
8363 dh->length and always used
8365 BN_rand_range(priv_key, dh->p).
8367 BN_rand_range() is not necessary for Diffie-Hellman, and this
8368 specific range makes Diffie-Hellman unnecessarily inefficient if
8369 dh->length (recommended exponent length) is much smaller than the
8370 length of dh->p. We could use BN_rand_range() if the order of
8371 the subgroup was stored in the DH structure, but we only have
8376 BN_rand(priv_key, l, ...)
8378 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
8384 RSA_eay_public_encrypt
8385 RSA_eay_private_decrypt
8386 RSA_eay_private_encrypt (signing)
8387 RSA_eay_public_decrypt (signature verification)
8389 (default implementations for RSA_public_encrypt,
8390 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
8391 always reject numbers >= n.
8394 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
8395 to synchronize access to 'locking_thread'. This is necessary on
8396 systems where access to 'locking_thread' (an 'unsigned long'
8397 variable) is not atomic.
8400 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
8401 *before* setting the 'crypto_lock_rand' flag. The previous code had
8402 a race condition if 0 is a valid thread ID.
8403 [Travis Vitek <vitek@roguewave.com>]
8405 *) Add support for shared libraries under Irix.
8406 [Albert Chin-A-Young <china@thewrittenword.com>]
8408 *) Add configuration option to build on Linux on both big-endian and
8410 [Ralf Baechle <ralf@uni-koblenz.de>]
8412 *) Add the possibility to create shared libraries on HP-UX.
8415 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
8417 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
8418 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
8419 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
8420 PRNG state recovery was possible based on the output of
8421 one PRNG request appropriately sized to gain knowledge on
8422 'md' followed by enough consecutive 1-byte PRNG requests
8423 to traverse all of 'state'.
8425 1. When updating 'md_local' (the current thread's copy of 'md')
8426 during PRNG output generation, hash all of the previous
8427 'md_local' value, not just the half used for PRNG output.
8429 2. Make the number of bytes from 'state' included into the hash
8430 independent from the number of PRNG bytes requested.
8432 The first measure alone would be sufficient to avoid
8433 Markku-Juhani's attack. (Actually it had never occurred
8434 to me that the half of 'md_local' used for chaining was the
8435 half from which PRNG output bytes were taken -- I had always
8436 assumed that the secret half would be used.) The second
8437 measure makes sure that additional data from 'state' is never
8438 mixed into 'md_local' in small portions; this heuristically
8439 further strengthens the PRNG.
8442 *) Fix crypto/bn/asm/mips3.s.
8445 *) When only the key is given to "enc", the IV is undefined. Print out
8446 an error message in this case.
8449 *) Handle special case when X509_NAME is empty in X509 printing routines.
8452 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
8453 positive and less than q.
8456 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
8457 used: it isn't thread safe and the add_lock_callback should handle
8459 [Paul Rose <Paul.Rose@bridge.com>]
8461 *) Verify that incoming data obeys the block size in
8462 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
8466 [Ulf Möller, Bodo Möller]
8468 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
8469 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
8470 when fixing the server behaviour for backwards-compatible 'client
8471 hello' messages. (Note that the attack is impractical against
8472 SSL 3.0 and TLS 1.0 anyway because length and version checking
8473 means that the probability of guessing a valid ciphertext is
8474 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
8477 Before 0.9.5, the countermeasure (hide the error by generating a
8478 random 'decryption result') did not work properly because
8479 ERR_clear_error() was missing, meaning that SSL_get_error() would
8480 detect the supposedly ignored error.
8482 Both problems are now fixed.
8485 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
8486 (previously it was 1024).
8489 *) Fix for compatibility mode trust settings: ignore trust settings
8490 unless some valid trust or reject settings are present.
8493 *) Fix for blowfish EVP: its a variable length cipher.
8496 *) Fix various bugs related to DSA S/MIME verification. Handle missing
8497 parameters in DSA public key structures and return an error in the
8498 DSA routines if parameters are absent.
8501 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
8502 in the current directory if neither $RANDFILE nor $HOME was set.
8503 RAND_file_name() in 0.9.6a returned NULL in this case. This has
8504 caused some confusion to Windows users who haven't defined $HOME.
8505 Thus RAND_file_name() is changed again: e_os.h can define a
8506 DEFAULT_HOME, which will be used if $HOME is not set.
8507 For Windows, we use "C:"; on other platforms, we still require
8508 environment variables.
8510 *) Move 'if (!initialized) RAND_poll()' into regions protected by
8511 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
8512 having multiple threads call RAND_poll() concurrently.
8515 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
8516 combination of a flag and a thread ID variable.
8517 Otherwise while one thread is in ssleay_rand_bytes (which sets the
8518 flag), *other* threads can enter ssleay_add_bytes without obeying
8519 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
8520 that they do not hold after the first thread unsets add_do_not_lock).
8523 *) Change bctest again: '-x' expressions are not available in all
8527 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
8529 *) Fix a couple of memory leaks in PKCS7_dataDecode()
8530 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
8532 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
8533 the default extension for executables, if any. Also, make the perl
8534 scripts that use symlink() to test if it really exists and use "cp"
8535 if it doesn't. All this made OpenSSL compilable and installable in
8539 *) Fix for asn1_GetSequence() for indefinite length constructed data.
8540 If SEQUENCE is length is indefinite just set c->slen to the total
8541 amount of data available.
8542 [Steve Henson, reported by shige@FreeBSD.org]
8543 [This change does not apply to 0.9.7.]
8545 *) Change bctest to avoid here-documents inside command substitution
8546 (workaround for FreeBSD /bin/sh bug).
8547 For compatibility with Ultrix, avoid shell functions (introduced
8548 in the bctest version that searches along $PATH).
8551 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
8552 with des_encrypt() defined on some operating systems, like Solaris
8556 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
8557 On the Importance of Eliminating Errors in Cryptographic
8558 Computations, J. Cryptology 14 (2001) 2, 101-119,
8559 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
8562 *) MIPS assembler BIGNUM division bug fix.
8565 *) Disabled incorrect Alpha assembler code.
8568 *) Fix PKCS#7 decode routines so they correctly update the length
8569 after reading an EOC for the EXPLICIT tag.
8571 [This change does not apply to 0.9.7.]
8573 *) Fix bug in PKCS#12 key generation routines. This was triggered
8574 if a 3DES key was generated with a 0 initial byte. Include
8575 PKCS12_BROKEN_KEYGEN compilation option to retain the old
8576 (but broken) behaviour.
8579 *) Enhance bctest to search for a working bc along $PATH and print
8581 [Tim Rice <tim@multitalents.net> via Richard Levitte]
8583 *) Fix memory leaks in err.c: free err_data string if necessary;
8584 don't write to the wrong index in ERR_set_error_data.
8587 *) Implement ssl23_peek (analogous to ssl23_read), which previously
8591 *) Replace rdtsc with _emit statements for VC++ version 5.
8592 [Jeremy Cooper <jeremy@baymoo.org>]
8594 *) Make it possible to reuse SSLv2 sessions.
8597 *) In copy_email() check for >= 0 as a return value for
8598 X509_NAME_get_index_by_NID() since 0 is a valid index.
8599 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
8601 *) Avoid coredump with unsupported or invalid public keys by checking if
8602 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
8603 PKCS7_verify() fails with non detached data.
8606 *) Don't use getenv in library functions when run as setuid/setgid.
8607 New function OPENSSL_issetugid().
8610 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
8611 due to incorrect handling of multi-threading:
8613 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
8615 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
8617 3. Count how many times MemCheck_off() has been called so that
8618 nested use can be treated correctly. This also avoids
8619 inband-signalling in the previous code (which relied on the
8620 assumption that thread ID 0 is impossible).
8623 *) Add "-rand" option also to s_client and s_server.
8626 *) Fix CPU detection on Irix 6.x.
8627 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
8628 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8630 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
8633 [This change does not apply to 0.9.7.]
8635 *) Use the cached encoding of an X509_NAME structure rather than
8636 copying it. This is apparently the reason for the libsafe "errors"
8637 but the code is actually correct.
8640 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
8641 Bleichenbacher's DSA attack.
8642 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
8643 to be set and top=0 forces the highest bit to be set; top=-1 is new
8644 and leaves the highest bit random.
8645 [Ulf Moeller, Bodo Moeller]
8647 *) In the NCONF_...-based implementations for CONF_... queries
8648 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
8649 a temporary CONF structure with the data component set to NULL
8650 (which gives segmentation faults in lh_retrieve).
8651 Instead, use NULL for the CONF pointer in CONF_get_string and
8652 CONF_get_number (which may use environment variables) and directly
8653 return NULL from CONF_get_section.
8656 *) Fix potential buffer overrun for EBCDIC.
8659 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
8660 keyUsage if basicConstraints absent for a CA.
8663 *) Make SMIME_write_PKCS7() write mail header values with a format that
8664 is more generally accepted (no spaces before the semicolon), since
8665 some programs can't parse those values properly otherwise. Also make
8666 sure BIO's that break lines after each write do not create invalid
8670 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
8671 macros previously used would not encode an empty SEQUENCE OF
8672 and break the signature.
8674 [This change does not apply to 0.9.7.]
8676 *) Zero the premaster secret after deriving the master secret in
8680 *) Add some EVP_add_digest_alias registrations (as found in
8681 OpenSSL_add_all_digests()) to SSL_library_init()
8682 aka OpenSSL_add_ssl_algorithms(). This provides improved
8683 compatibility with peers using X.509 certificates
8684 with unconventional AlgorithmIdentifier OIDs.
8687 *) Fix for Irix with NO_ASM.
8688 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8690 *) ./config script fixes.
8691 [Ulf Moeller, Richard Levitte]
8693 *) Fix 'openssl passwd -1'.
8696 *) Change PKCS12_key_gen_asc() so it can cope with non null
8697 terminated strings whose length is passed in the passlen
8698 parameter, for example from PEM callbacks. This was done
8699 by adding an extra length parameter to asc2uni().
8700 [Steve Henson, reported by <oddissey@samsung.co.kr>]
8702 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
8703 call failed, free the DSA structure.
8706 *) Fix to uni2asc() to cope with zero length Unicode strings.
8707 These are present in some PKCS#12 files.
8710 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
8711 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
8712 when writing a 32767 byte record.
8713 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
8715 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
8716 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
8718 (RSA objects have a reference count access to which is protected
8719 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
8720 so they are meant to be shared between threads.)
8721 [Bodo Moeller, Geoff Thorpe; original patch submitted by
8722 "Reddie, Steven" <Steven.Reddie@ca.com>]
8724 *) Fix a deadlock in CRYPTO_mem_leaks().
8727 *) Use better test patterns in bntest.
8730 *) rand_win.c fix for Borland C.
8733 *) BN_rshift bugfix for n == 0.
8736 *) Add a 'bctest' script that checks for some known 'bc' bugs
8737 so that 'make test' does not abort just because 'bc' is broken.
8740 *) Store verify_result within SSL_SESSION also for client side to
8741 avoid potential security hole. (Re-used sessions on the client side
8742 always resulted in verify_result==X509_V_OK, not using the original
8743 result of the server certificate verification.)
8746 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
8747 SSL3_RT_APPLICATION_DATA, return 0.
8748 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
8752 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
8753 releases, have been re-implemented by renaming the previous
8754 implementations of ssl2_read and ssl3_read to ssl2_read_internal
8755 and ssl3_read_internal, respectively, and adding 'peek' parameters
8756 to them. The new ssl[23]_{read,peek} functions are calls to
8757 ssl[23]_read_internal with the 'peek' flag set appropriately.
8758 A 'peek' parameter has also been added to ssl3_read_bytes, which
8759 does the actual work for ssl3_read_internal.
8762 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
8763 the method-specific "init()" handler. Also clean up ex_data after
8764 calling the method-specific "finish()" handler. Previously, this was
8765 happening the other way round.
8768 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
8769 The previous value, 12, was not always sufficient for BN_mod_exp().
8772 *) Make sure that shared libraries get the internal name engine with
8773 the full version number and not just 0. This should mark the
8774 shared libraries as not backward compatible. Of course, this should
8775 be changed again when we can guarantee backward binary compatibility.
8778 *) Fix typo in get_cert_by_subject() in by_dir.c
8779 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
8781 *) Rework the system to generate shared libraries:
8783 - Make note of the expected extension for the shared libraries and
8784 if there is a need for symbolic links from for example libcrypto.so.0
8785 to libcrypto.so.0.9.7. There is extended info in Configure for
8788 - Make as few rebuilds of the shared libraries as possible.
8790 - Still avoid linking the OpenSSL programs with the shared libraries.
8792 - When installing, install the shared libraries separately from the
8796 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
8798 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
8799 and not in SSL_clear because the latter is also used by the
8800 accept/connect functions; previously, the settings made by
8801 SSL_set_read_ahead would be lost during the handshake.
8802 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
8804 *) Correct util/mkdef.pl to be selective about disabled algorithms.
8805 Previously, it would create entries for disabled algorithms no
8809 *) Added several new manual pages for SSL_* function.
8812 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
8814 *) In ssl23_get_client_hello, generate an error message when faced
8815 with an initial SSL 3.0/TLS record that is too small to contain the
8816 first two bytes of the ClientHello message, i.e. client_version.
8817 (Note that this is a pathologic case that probably has never happened
8818 in real life.) The previous approach was to use the version number
8819 from the record header as a substitute; but our protocol choice
8820 should not depend on that one because it is not authenticated
8821 by the Finished messages.
8824 *) More robust randomness gathering functions for Windows.
8825 [Jeffrey Altman <jaltman@columbia.edu>]
8827 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
8828 not set then we don't setup the error code for issuer check errors
8829 to avoid possibly overwriting other errors which the callback does
8830 handle. If an application does set the flag then we assume it knows
8831 what it is doing and can handle the new informational codes
8835 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
8836 a general "ANY" type, as such it should be able to decode anything
8837 including tagged types. However it didn't check the class so it would
8838 wrongly interpret tagged types in the same way as their universal
8839 counterpart and unknown types were just rejected. Changed so that the
8840 tagged and unknown types are handled in the same way as a SEQUENCE:
8841 that is the encoding is stored intact. There is also a new type
8842 "V_ASN1_OTHER" which is used when the class is not universal, in this
8843 case we have no idea what the actual type is so we just lump them all
8847 *) On VMS, stdout may very well lead to a file that is written to
8848 in a record-oriented fashion. That means that every write() will
8849 write a separate record, which will be read separately by the
8850 programs trying to read from it. This can be very confusing.
8852 The solution is to put a BIO filter in the way that will buffer
8853 text until a linefeed is reached, and then write everything a
8854 line at a time, so every record written will be an actual line,
8855 not chunks of lines and not (usually doesn't happen, but I've
8856 seen it once) several lines in one record. BIO_f_linebuffer() is
8859 Currently, it's a VMS-only method, because that's where it has
8860 been tested well enough.
8863 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
8864 it can return incorrect results.
8865 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
8866 but it was in 0.9.6-beta[12].)
8869 *) Disable the check for content being present when verifying detached
8870 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
8871 include zero length content when signing messages.
8874 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
8875 BIO_ctrl (for BIO pairs).
8878 *) Add DSO method for VMS.
8881 *) Bug fix: Montgomery multiplication could produce results with the
8885 *) Add RPM specification openssl.spec and modify it to build three
8886 packages. The default package contains applications, application
8887 documentation and run-time libraries. The devel package contains
8888 include files, static libraries and function documentation. The
8889 doc package contains the contents of the doc directory. The original
8890 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
8893 *) Add a large number of documentation files for many SSL routines.
8894 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
8896 *) Add a configuration entry for Sony News 4.
8897 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
8899 *) Don't set the two most significant bits to one when generating a
8900 random number < q in the DSA library.
8903 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
8904 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
8905 the underlying transport is blocking) if a handshake took place.
8906 (The default behaviour is needed by applications such as s_client
8907 and s_server that use select() to determine when to use SSL_read;
8908 but for applications that know in advance when to expect data, it
8909 just makes things more complicated.)
8912 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
8916 *) Add a few more EBCDIC conditionals that make `req' and `x509'
8917 work better on such systems.
8918 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8920 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
8921 Update PKCS12_parse() so it copies the friendlyName and the
8922 keyid to the certificates aux info.
8925 *) Fix bug in PKCS7_verify() which caused an infinite loop
8926 if there was more than one signature.
8927 [Sven Uszpelkat <su@celocom.de>]
8929 *) Major change in util/mkdef.pl to include extra information
8930 about each symbol, as well as presenting variables as well
8931 as functions. This change means that there's n more need
8932 to rebuild the .num files when some algorithms are excluded.
8935 *) Allow the verify time to be set by an application,
8936 rather than always using the current time.
8939 *) Phase 2 verify code reorganisation. The certificate
8940 verify code now looks up an issuer certificate by a
8941 number of criteria: subject name, authority key id
8942 and key usage. It also verifies self signed certificates
8943 by the same criteria. The main comparison function is
8944 X509_check_issued() which performs these checks.
8946 Lot of changes were necessary in order to support this
8947 without completely rewriting the lookup code.
8949 Authority and subject key identifier are now cached.
8951 The LHASH 'certs' is X509_STORE has now been replaced
8952 by a STACK_OF(X509_OBJECT). This is mainly because an
8953 LHASH can't store or retrieve multiple objects with
8954 the same hash value.
8956 As a result various functions (which were all internal
8957 use only) have changed to handle the new X509_STORE
8958 structure. This will break anything that messed round
8959 with X509_STORE internally.
8961 The functions X509_STORE_add_cert() now checks for an
8962 exact match, rather than just subject name.
8964 The X509_STORE API doesn't directly support the retrieval
8965 of multiple certificates matching a given criteria, however
8966 this can be worked round by performing a lookup first
8967 (which will fill the cache with candidate certificates)
8968 and then examining the cache for matches. This is probably
8969 the best we can do without throwing out X509_LOOKUP
8970 entirely (maybe later...).
8972 The X509_VERIFY_CTX structure has been enhanced considerably.
8974 All certificate lookup operations now go via a get_issuer()
8975 callback. Although this currently uses an X509_STORE it
8976 can be replaced by custom lookups. This is a simple way
8977 to bypass the X509_STORE hackery necessary to make this
8978 work and makes it possible to use more efficient techniques
8979 in future. A very simple version which uses a simple
8980 STACK for its trusted certificate store is also provided
8981 using X509_STORE_CTX_trusted_stack().
8983 The verify_cb() and verify() callbacks now have equivalents
8984 in the X509_STORE_CTX structure.
8986 X509_STORE_CTX also has a 'flags' field which can be used
8987 to customise the verify behaviour.
8990 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
8991 excludes S/MIME capabilities.
8994 *) When a certificate request is read in keep a copy of the
8995 original encoding of the signed data and use it when outputting
8996 again. Signatures then use the original encoding rather than
8997 a decoded, encoded version which may cause problems if the
8998 request is improperly encoded.
9001 *) For consistency with other BIO_puts implementations, call
9002 buffer_write(b, ...) directly in buffer_puts instead of calling
9005 In BIO_puts, increment b->num_write as in BIO_write.
9006 [Peter.Sylvester@EdelWeb.fr]
9008 *) Fix BN_mul_word for the case where the word is 0. (We have to use
9009 BN_zero, we may not return a BIGNUM with an array consisting of
9013 *) Avoid calling abort() from within the library when problems are
9014 detected, except if preprocessor symbols have been defined
9015 (such as REF_CHECK, BN_DEBUG etc.).
9018 *) New openssl application 'rsautl'. This utility can be
9019 used for low level RSA operations. DER public key
9020 BIO/fp routines also added.
9023 *) New Configure entry and patches for compiling on QNX 4.
9024 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
9026 *) A demo state-machine implementation was sponsored by
9027 Nuron (http://www.nuron.com/) and is now available in
9028 demos/state_machine.
9031 *) New options added to the 'dgst' utility for signature
9032 generation and verification.
9035 *) Unrecognized PKCS#7 content types are now handled via a
9036 catch all ASN1_TYPE structure. This allows unsupported
9037 types to be stored as a "blob" and an application can
9038 encode and decode it manually.
9041 *) Fix various signed/unsigned issues to make a_strex.c
9043 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
9045 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
9046 length if passed a buffer. ASN1_INTEGER_to_BN failed
9047 if passed a NULL BN and its argument was negative.
9048 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
9050 *) Modification to PKCS#7 encoding routines to output definite
9051 length encoding. Since currently the whole structures are in
9052 memory there's not real point in using indefinite length
9053 constructed encoding. However if OpenSSL is compiled with
9054 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
9057 *) Added BIO_vprintf() and BIO_vsnprintf().
9060 *) Added more prefixes to parse for in the the strings written
9061 through a logging bio, to cover all the levels that are available
9062 through syslog. The prefixes are now:
9064 PANIC, EMERG, EMR => LOG_EMERG
9065 ALERT, ALR => LOG_ALERT
9066 CRIT, CRI => LOG_CRIT
9067 ERROR, ERR => LOG_ERR
9068 WARNING, WARN, WAR => LOG_WARNING
9069 NOTICE, NOTE, NOT => LOG_NOTICE
9070 INFO, INF => LOG_INFO
9071 DEBUG, DBG => LOG_DEBUG
9073 and as before, if none of those prefixes are present at the
9074 beginning of the string, LOG_ERR is chosen.
9076 On Win32, the LOG_* levels are mapped according to this:
9078 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
9079 LOG_WARNING => EVENTLOG_WARNING_TYPE
9080 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
9084 *) Made it possible to reconfigure with just the configuration
9085 argument "reconf" or "reconfigure". The command line arguments
9086 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
9087 and are retrieved from there when reconfiguring.
9091 [Assar Westerlund <assar@sics.se>, Richard Levitte]
9093 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
9096 *) The obj_dat.pl script was messing up the sorting of object
9097 names. The reason was that it compared the quoted version
9098 of strings as a result "OCSP" > "OCSP Signing" because
9099 " > SPACE. Changed script to store unquoted versions of
9100 names and add quotes on output. It was also omitting some
9101 names from the lookup table if they were given a default
9102 value (that is if SN is missing it is given the same
9103 value as LN and vice versa), these are now added on the
9104 grounds that if an object has a name we should be able to
9105 look it up. Finally added warning output when duplicate
9106 short or long names are found.
9109 *) Changes needed for Tandem NSK.
9110 [Scott Uroff <scott@xypro.com>]
9112 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
9113 RSA_padding_check_SSLv23(), special padding was never detected
9114 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
9115 version rollback attacks was not effective.
9117 In s23_clnt.c, don't use special rollback-attack detection padding
9118 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
9119 client; similarly, in s23_srvr.c, don't do the rollback check if
9120 SSL 2.0 is the only protocol enabled in the server.
9123 *) Make it possible to get hexdumps of unprintable data with 'openssl
9124 asn1parse'. By implication, the functions ASN1_parse_dump() and
9125 BIO_dump_indent() are added.
9128 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
9129 these print out strings and name structures based on various
9130 flags including RFC2253 support and proper handling of
9131 multibyte characters. Added options to the 'x509' utility
9132 to allow the various flags to be set.
9135 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
9136 Also change the functions X509_cmp_current_time() and
9137 X509_gmtime_adj() work with an ASN1_TIME structure,
9138 this will enable certificates using GeneralizedTime in validity
9139 dates to be checked.
9142 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
9143 negative public key encodings) on by default,
9144 NO_NEG_PUBKEY_BUG can be set to disable it.
9147 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
9148 content octets. An i2c_ASN1_OBJECT is unnecessary because
9149 the encoding can be trivially obtained from the structure.
9152 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
9153 not read locks (CRYPTO_r_[un]lock).
9156 *) A first attempt at creating official support for shared
9157 libraries through configuration. I've kept it so the
9158 default is static libraries only, and the OpenSSL programs
9159 are always statically linked for now, but there are
9160 preparations for dynamic linking in place.
9161 This has been tested on Linux and Tru64.
9164 *) Randomness polling function for Win9x, as described in:
9165 Peter Gutmann, Software Generation of Practically Strong
9169 *) Fix so PRNG is seeded in req if using an already existing
9173 *) New options to smime application. -inform and -outform
9174 allow alternative formats for the S/MIME message including
9175 PEM and DER. The -content option allows the content to be
9176 specified separately. This should allow things like Netscape
9177 form signing output easier to verify.
9180 *) Fix the ASN1 encoding of tags using the 'long form'.
9183 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
9184 STRING types. These convert content octets to and from the
9185 underlying type. The actual tag and length octets are
9186 already assumed to have been read in and checked. These
9187 are needed because all other string types have virtually
9188 identical handling apart from the tag. By having versions
9189 of the ASN1 functions that just operate on content octets
9190 IMPLICIT tagging can be handled properly. It also allows
9191 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
9192 and ASN1_INTEGER are identical apart from the tag.
9195 *) Change the handling of OID objects as follows:
9197 - New object identifiers are inserted in objects.txt, following
9198 the syntax given in objects.README.
9199 - objects.pl is used to process obj_mac.num and create a new
9201 - obj_dat.pl is used to create a new obj_dat.h, using the data in
9204 This is currently kind of a hack, and the perl code in objects.pl
9205 isn't very elegant, but it works as I intended. The simplest way
9206 to check that it worked correctly is to look in obj_dat.h and
9207 check the array nid_objs and make sure the objects haven't moved
9208 around (this is important!). Additions are OK, as well as
9209 consistent name changes.
9212 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
9215 *) Addition of the command line parameter '-rand file' to 'openssl req'.
9216 The given file adds to whatever has already been seeded into the
9217 random pool through the RANDFILE configuration file option or
9218 environment variable, or the default random state file.
9221 *) mkstack.pl now sorts each macro group into lexical order.
9222 Previously the output order depended on the order the files
9223 appeared in the directory, resulting in needless rewriting
9227 *) Patches to make OpenSSL compile under Win32 again. Mostly
9228 work arounds for the VC++ problem that it treats func() as
9229 func(void). Also stripped out the parts of mkdef.pl that
9230 added extra typesafe functions: these no longer exist.
9233 *) Reorganisation of the stack code. The macros are now all
9234 collected in safestack.h . Each macro is defined in terms of
9235 a "stack macro" of the form SKM_<name>(type, a, b). The
9236 DEBUG_SAFESTACK is now handled in terms of function casts,
9237 this has the advantage of retaining type safety without the
9238 use of additional functions. If DEBUG_SAFESTACK is not defined
9239 then the non typesafe macros are used instead. Also modified the
9240 mkstack.pl script to handle the new form. Needs testing to see
9241 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
9242 the default if no major problems. Similar behaviour for ASN1_SET_OF
9243 and PKCS12_STACK_OF.
9246 *) When some versions of IIS use the 'NET' form of private key the
9247 key derivation algorithm is different. Normally MD5(password) is
9248 used as a 128 bit RC4 key. In the modified case
9249 MD5(MD5(password) + "SGCKEYSALT") is used instead. Added some
9250 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
9251 as the old Netscape_RSA functions except they have an additional
9252 'sgckey' parameter which uses the modified algorithm. Also added
9253 an -sgckey command line option to the rsa utility. Thanks to
9254 Adrian Peck <bertie@ncipher.com> for posting details of the modified
9255 algorithm to openssl-dev.
9258 *) The evp_local.h macros were using 'c.##kname' which resulted in
9259 invalid expansion on some systems (SCO 5.0.5 for example).
9260 Corrected to 'c.kname'.
9261 [Phillip Porch <root@theporch.com>]
9263 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
9264 a STACK of email addresses from a certificate or request, these look
9265 in the subject name and the subject alternative name extensions and
9266 omit any duplicate addresses.
9269 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
9270 This makes DSA verification about 2 % faster.
9273 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
9274 (meaning that now 2^5 values will be precomputed, which is only 4 KB
9275 plus overhead for 1024 bit moduli).
9276 This makes exponentiations about 0.5 % faster for 1024 bit
9277 exponents (as measured by "openssl speed rsa2048").
9280 *) Rename memory handling macros to avoid conflicts with other
9282 Malloc => OPENSSL_malloc
9283 Malloc_locked => OPENSSL_malloc_locked
9284 Realloc => OPENSSL_realloc
9285 Free => OPENSSL_free
9288 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
9289 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
9292 *) CygWin32 support.
9293 [John Jarvie <jjarvie@newsguy.com>]
9295 *) The type-safe stack code has been rejigged. It is now only compiled
9296 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
9297 by default all type-specific stack functions are "#define"d back to
9298 standard stack functions. This results in more streamlined output
9299 but retains the type-safety checking possibilities of the original
9303 *) The STACK code has been cleaned up, and certain type declarations
9304 that didn't make a lot of sense have been brought in line. This has
9305 also involved a cleanup of sorts in safestack.h to more correctly
9306 map type-safe stack functions onto their plain stack counterparts.
9307 This work has also resulted in a variety of "const"ifications of
9308 lots of the code, especially "_cmp" operations which should normally
9309 be prototyped with "const" parameters anyway.
9312 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
9313 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
9314 (The PRNG state consists of two parts, the large pool 'state' and 'md',
9315 where all of 'md' is used each time the PRNG is used, but 'state'
9316 is used only indexed by a cyclic counter. As entropy may not be
9317 well distributed from the beginning, 'md' is important as a
9318 chaining variable. However, the output function chains only half
9319 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
9320 all of 'md', and seeding with STATE_SIZE dummy bytes will result
9321 in all of 'state' being rewritten, with the new values depending
9322 on virtually all of 'md'. This overcomes the 80 bit limitation.)
9325 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
9326 the handshake is continued after ssl_verify_cert_chain();
9327 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
9328 can lead to 'unexplainable' connection aborts later.
9329 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
9331 *) Major EVP API cipher revision.
9332 Add hooks for extra EVP features. This allows various cipher
9333 parameters to be set in the EVP interface. Support added for variable
9334 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
9335 setting of RC2 and RC5 parameters.
9337 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
9340 Remove lots of duplicated code from the EVP library. For example *every*
9341 cipher init() function handles the 'iv' in the same way according to the
9342 cipher mode. They also all do nothing if the 'key' parameter is NULL and
9343 for CFB and OFB modes they zero ctx->num.
9345 New functionality allows removal of S/MIME code RC2 hack.
9347 Most of the routines have the same form and so can be declared in terms
9350 By shifting this to the top level EVP_CipherInit() it can be removed from
9351 all individual ciphers. If the cipher wants to handle IVs or keys
9352 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
9355 Change lots of functions like EVP_EncryptUpdate() to now return a
9356 value: although software versions of the algorithms cannot fail
9357 any installed hardware versions can.
9360 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
9361 this option is set, tolerate broken clients that send the negotiated
9362 protocol version number instead of the requested protocol version
9366 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
9367 i.e. non-zero for export ciphersuites, zero otherwise.
9368 Previous versions had this flag inverted, inconsistent with
9369 rsa_tmp_cb (..._TMP_RSA_CB).
9370 [Bodo Moeller; problem reported by Amit Chopra]
9372 *) Add missing DSA library text string. Work around for some IIS
9373 key files with invalid SEQUENCE encoding.
9376 *) Add a document (doc/standards.txt) that list all kinds of standards
9377 and so on that are implemented in OpenSSL.
9380 *) Enhance c_rehash script. Old version would mishandle certificates
9381 with the same subject name hash and wouldn't handle CRLs at all.
9382 Added -fingerprint option to crl utility, to support new c_rehash
9386 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
9389 *) Fix for SSL server purpose checking. Server checking was
9390 rejecting certificates which had extended key usage present
9391 but no ssl client purpose.
9392 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
9394 *) Make PKCS#12 code work with no password. The PKCS#12 spec
9395 is a little unclear about how a blank password is handled.
9396 Since the password in encoded as a BMPString with terminating
9397 double NULL a zero length password would end up as just the
9398 double NULL. However no password at all is different and is
9399 handled differently in the PKCS#12 key generation code. NS
9400 treats a blank password as zero length. MSIE treats it as no
9401 password on export: but it will try both on import. We now do
9402 the same: PKCS12_parse() tries zero length and no password if
9403 the password is set to "" or NULL (NULL is now a valid password:
9404 it wasn't before) as does the pkcs12 application.
9407 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
9408 perror when PEM_read_bio_X509_REQ fails, the error message must
9409 be obtained from the error queue.
9412 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
9413 it in ERR_remove_state if appropriate, and change ERR_get_state
9414 accordingly to avoid race conditions (this is necessary because
9415 thread_hash is no longer constant once set).
9418 *) Bugfix for linux-elf makefile.one.
9421 *) RSA_get_default_method() will now cause a default
9422 RSA_METHOD to be chosen if one doesn't exist already.
9423 Previously this was only set during a call to RSA_new()
9424 or RSA_new_method(NULL) meaning it was possible for
9425 RSA_get_default_method() to return NULL.
9428 *) Added native name translation to the existing DSO code
9429 that will convert (if the flag to do so is set) filenames
9430 that are sufficiently small and have no path information
9431 into a canonical native form. Eg. "blah" converted to
9432 "libblah.so" or "blah.dll" etc.
9435 *) New function ERR_error_string_n(e, buf, len) which is like
9436 ERR_error_string(e, buf), but writes at most 'len' bytes
9437 including the 0 terminator. For ERR_error_string_n, 'buf'
9439 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
9441 *) CONF library reworked to become more general. A new CONF
9442 configuration file reader "class" is implemented as well as a
9443 new functions (NCONF_*, for "New CONF") to handle it. The now
9444 old CONF_* functions are still there, but are reimplemented to
9445 work in terms of the new functions. Also, a set of functions
9446 to handle the internal storage of the configuration data is
9447 provided to make it easier to write new configuration file
9448 reader "classes" (I can definitely see something reading a
9449 configuration file in XML format, for example), called _CONF_*,
9450 or "the configuration storage API"...
9452 The new configuration file reading functions are:
9454 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
9455 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
9457 NCONF_default, NCONF_WIN32
9459 NCONF_dump_fp, NCONF_dump_bio
9461 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
9462 NCONF_new creates a new CONF object. This works in the same way
9463 as other interfaces in OpenSSL, like the BIO interface.
9464 NCONF_dump_* dump the internal storage of the configuration file,
9465 which is useful for debugging. All other functions take the same
9466 arguments as the old CONF_* functions wth the exception of the
9467 first that must be a `CONF *' instead of a `LHASH *'.
9469 To make it easer to use the new classes with the old CONF_* functions,
9470 the function CONF_set_default_method is provided.
9473 *) Add '-tls1' option to 'openssl ciphers', which was already
9474 mentioned in the documentation but had not been implemented.
9475 (This option is not yet really useful because even the additional
9476 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
9479 *) Initial DSO code added into libcrypto for letting OpenSSL (and
9480 OpenSSL-based applications) load shared libraries and bind to
9481 them in a portable way.
9482 [Geoff Thorpe, with contributions from Richard Levitte]
9484 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
9486 *) Make sure _lrotl and _lrotr are only used with MSVC.
9488 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
9489 (the default implementation of RAND_status).
9491 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
9492 to '-clrext' (= clear extensions), as intended and documented.
9493 [Bodo Moeller; inconsistency pointed out by Michael Attili
9496 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
9497 was larger than the MD block size.
9498 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
9500 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
9501 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
9502 using the passed key: if the passed key was a private key the result
9503 of X509_print(), for example, would be to print out all the private key
9507 *) des_quad_cksum() byte order bug fix.
9508 [Ulf Möller, using the problem description in krb4-0.9.7, where
9509 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
9511 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
9513 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
9515 *) For easily testing in shell scripts whether some command
9516 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
9517 returns with exit code 0 iff no command of the given name is available.
9518 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
9519 the output goes to stdout and nothing is printed to stderr.
9520 Additional arguments are always ignored.
9522 Since for each cipher there is a command of the same name,
9523 the 'no-cipher' compilation switches can be tested this way.
9525 ('openssl no-XXX' is not able to detect pseudo-commands such
9526 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
9529 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
9532 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
9533 is set; it will be thrown away anyway because each handshake creates
9535 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
9536 to parameters -- in previous versions (since OpenSSL 0.9.3) the
9537 'default key' from SSL_CTX_set_tmp_dh would always be lost, meaning
9538 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
9541 *) New s_client option -ign_eof: EOF at stdin is ignored, and
9542 'Q' and 'R' lose their special meanings (quit/renegotiate).
9543 This is part of what -quiet does; unlike -quiet, -ign_eof
9544 does not suppress any output.
9547 *) Add compatibility options to the purpose and trust code. The
9548 purpose X509_PURPOSE_ANY is "any purpose" which automatically
9549 accepts a certificate or CA, this was the previous behaviour,
9550 with all the associated security issues.
9552 X509_TRUST_COMPAT is the old trust behaviour: only and
9553 automatically trust self signed roots in certificate store. A
9554 new trust setting X509_TRUST_DEFAULT is used to specify that
9555 a purpose has no associated trust setting and it should instead
9556 use the value in the default purpose.
9559 *) Fix the PKCS#8 DSA private key code so it decodes keys again
9560 and fix a memory leak.
9563 *) In util/mkerr.pl (which implements 'make errors'), preserve
9564 reason strings from the previous version of the .c file, as
9565 the default to have only downcase letters (and digits) in
9566 automatically generated reasons codes is not always appropriate.
9569 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
9570 using strerror. Previously, ERR_reason_error_string() returned
9571 library names as reason strings for SYSerr; but SYSerr is a special
9572 case where small numbers are errno values, not library numbers.
9575 *) Add '-dsaparam' option to 'openssl dhparam' application. This
9576 converts DSA parameters into DH parameters. (When creating parameters,
9577 DSA_generate_parameters is used.)
9580 *) Include 'length' (recommended exponent length) in C code generated
9581 by 'openssl dhparam -C'.
9584 *) The second argument to set_label in perlasm was already being used
9585 so couldn't be used as a "file scope" flag. Moved to third argument
9589 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
9590 instead of RAND_bytes for encryption IVs and salts.
9593 *) Include RAND_status() into RAND_METHOD instead of implementing
9594 it only for md_rand.c Otherwise replacing the PRNG by calling
9595 RAND_set_rand_method would be impossible.
9598 *) Don't let DSA_generate_key() enter an infinite loop if the random
9599 number generation fails.
9602 *) New 'rand' application for creating pseudo-random output.
9605 *) Added configuration support for Linux/IA64
9606 [Rolf Haberrecker <rolf@suse.de>]
9608 *) Assembler module support for Mingw32.
9611 *) Shared library support for HPUX (in shlib/).
9612 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
9614 *) Shared library support for Solaris gcc.
9615 [Lutz Behnke <behnke@trustcenter.de>]
9617 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
9619 *) PKCS7_encrypt() was adding text MIME headers twice because they
9620 were added manually and by SMIME_crlf_copy().
9623 *) In bntest.c don't call BN_rand with zero bits argument.
9624 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
9626 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
9627 case was implemented. This caused BN_div_recp() to fail occasionally.
9630 *) Add an optional second argument to the set_label() in the perl
9631 assembly language builder. If this argument exists and is set
9632 to 1 it signals that the assembler should use a symbol whose
9633 scope is the entire file, not just the current function. This
9634 is needed with MASM which uses the format label:: for this scope.
9635 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
9637 *) Change the ASN1 types so they are typedefs by default. Before
9638 almost all types were #define'd to ASN1_STRING which was causing
9639 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
9643 *) Change names of new functions to the new get1/get0 naming
9644 convention: After 'get1', the caller owns a reference count
9645 and has to call ..._free; 'get0' returns a pointer to some
9646 data structure without incrementing reference counters.
9647 (Some of the existing 'get' functions increment a reference
9648 counter, some don't.)
9649 Similarly, 'set1' and 'add1' functions increase reference
9650 counters or duplicate objects.
9653 *) Allow for the possibility of temp RSA key generation failure:
9654 the code used to assume it always worked and crashed on failure.
9657 *) Fix potential buffer overrun problem in BIO_printf().
9658 [Ulf Möller, using public domain code by Patrick Powell; problem
9659 pointed out by David Sacerdote <das33@cornell.edu>]
9661 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
9662 RAND_egd() and RAND_status(). In the command line application,
9663 the EGD socket can be specified like a seed file using RANDFILE
9667 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
9668 Some CAs (e.g. Verisign) distribute certificates in this form.
9671 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
9672 list to exclude them. This means that no special compilation option
9673 is needed to use anonymous DH: it just needs to be included in the
9677 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
9678 EVP_MD_type. The old functionality is available in a new macro called
9679 EVP_MD_md(). Change code that uses it and update docs.
9682 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
9683 where the 'void *' argument is replaced by a function pointer argument.
9684 Previously 'void *' was abused to point to functions, which works on
9685 many platforms, but is not correct. As these functions are usually
9686 called by macros defined in OpenSSL header files, most source code
9687 should work without changes.
9690 *) <openssl/opensslconf.h> (which is created by Configure) now contains
9691 sections with information on -D... compiler switches used for
9692 compiling the library so that applications can see them. To enable
9693 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
9694 must be defined. E.g.,
9695 #define OPENSSL_ALGORITHM_DEFINES
9696 #include <openssl/opensslconf.h>
9697 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
9698 [Richard Levitte, Ulf and Bodo Möller]
9700 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
9704 *) Change the 'other' type in certificate aux info to a STACK_OF
9705 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
9706 the required ASN1 format: arbitrary types determined by an OID.
9709 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
9710 argument to 'req'. This is not because the function is newer or
9711 better than others it just uses the work 'NEW' in the certificate
9712 request header lines. Some software needs this.
9715 *) Reorganise password command line arguments: now passwords can be
9716 obtained from various sources. Delete the PEM_cb function and make
9717 it the default behaviour: i.e. if the callback is NULL and the
9718 usrdata argument is not NULL interpret it as a null terminated pass
9719 phrase. If usrdata and the callback are NULL then the pass phrase
9720 is prompted for as usual.
9723 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
9724 the support is automatically enabled. The resulting binaries will
9725 autodetect the card and use it if present.
9726 [Ben Laurie and Compaq Inc.]
9728 *) Work around for Netscape hang bug. This sends certificate request
9729 and server done in one record. Since this is perfectly legal in the
9730 SSL/TLS protocol it isn't a "bug" option and is on by default. See
9731 the bugs/SSLv3 entry for more info.
9734 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
9737 *) Add -rand argument to smime and pkcs12 applications and read/write
9741 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
9744 *) Add command line password options to the remaining applications.
9747 *) Bug fix for BN_div_recp() for numerators with an even number of
9751 *) More tests in bntest.c, and changed test_bn output.
9754 *) ./config recognizes MacOS X now.
9757 *) Bug fix for BN_div() when the first words of num and divsor are
9758 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
9761 *) Add support for various broken PKCS#8 formats, and command line
9762 options to produce them.
9765 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
9766 get temporary BIGNUMs from a BN_CTX.
9769 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
9773 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
9774 include a #define from the old name to the new. The original intent
9775 was that statically linked binaries could for example just call
9776 SSLeay_add_all_ciphers() to just add ciphers to the table and not
9777 link with digests. This never worked because SSLeay_add_all_digests()
9778 and SSLeay_add_all_ciphers() were in the same source file so calling
9779 one would link with the other. They are now in separate source files.
9782 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
9785 *) Use a less unusual form of the Miller-Rabin primality test (it used
9786 a binary algorithm for exponentiation integrated into the Miller-Rabin
9787 loop, our standard modexp algorithms are faster).
9790 *) Support for the EBCDIC character set completed.
9791 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
9793 *) Source code cleanups: use const where appropriate, eliminate casts,
9794 use void * instead of char * in lhash.
9797 *) Bugfix: ssl3_send_server_key_exchange was not restartable
9798 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
9799 this the server could overwrite ephemeral keys that the client
9803 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
9804 using 50 iterations of the Rabin-Miller test.
9806 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
9807 iterations of the Rabin-Miller test as required by the appendix
9808 to FIPS PUB 186[-1]) instead of DSA_is_prime.
9809 As BN_is_prime_fasttest includes trial division, DSA parameter
9810 generation becomes much faster.
9812 This implies a change for the callback functions in DSA_is_prime
9813 and DSA_generate_parameters: The callback function is called once
9814 for each positive witness in the Rabin-Miller test, not just
9815 occasionally in the inner loop; and the parameters to the
9816 callback function now provide an iteration count for the outer
9817 loop rather than for the current invocation of the inner loop.
9818 DSA_generate_parameters additionally can call the callback
9819 function with an 'iteration count' of -1, meaning that a
9820 candidate has passed the trial division test (when q is generated
9821 from an application-provided seed, trial division is skipped).
9824 *) New function BN_is_prime_fasttest that optionally does trial
9825 division before starting the Rabin-Miller test and has
9826 an additional BN_CTX * argument (whereas BN_is_prime always
9827 has to allocate at least one BN_CTX).
9828 'callback(1, -1, cb_arg)' is called when a number has passed the
9829 trial division stage.
9832 *) Fix for bug in CRL encoding. The validity dates weren't being handled
9836 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
9839 *) New function BN_pseudo_rand().
9842 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
9843 bignum version of BN_from_montgomery() with the working code from
9844 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
9848 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
9849 made it impossible to use the same SSL_SESSION data structure in
9850 SSL2 clients in multiple threads.
9853 *) The return value of RAND_load_file() no longer counts bytes obtained
9854 by stat(). RAND_load_file(..., -1) is new and uses the complete file
9855 to seed the PRNG (previously an explicit byte count was required).
9856 [Ulf Möller, Bodo Möller]
9858 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
9859 used (char *) instead of (void *) and had casts all over the place.
9862 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
9865 *) Retain source code compatibility for BN_prime_checks macro:
9866 BN_is_prime(..., BN_prime_checks, ...) now uses
9867 BN_prime_checks_for_size to determine the appropriate number of
9868 Rabin-Miller iterations.
9871 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
9872 DH_CHECK_P_NOT_SAFE_PRIME.
9873 (Check if this is true? OpenPGP calls them "strong".)
9876 *) Merge the functionality of "dh" and "gendh" programs into a new program
9877 "dhparam". The old programs are retained for now but will handle DH keys
9878 (instead of parameters) in future.
9881 *) Make the ciphers, s_server and s_client programs check the return values
9882 when a new cipher list is set.
9885 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
9886 ciphers. Before when the 56bit ciphers were enabled the sorting was
9889 The syntax for the cipher sorting has been extended to support sorting by
9890 cipher-strength (using the strength_bits hard coded in the tables).
9891 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
9893 Fix a bug in the cipher-command parser: when supplying a cipher command
9894 string with an "undefined" symbol (neither command nor alphanumeric
9895 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
9896 an error is flagged.
9898 Due to the strength-sorting extension, the code of the
9899 ssl_create_cipher_list() function was completely rearranged. I hope that
9900 the readability was also increased :-)
9901 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
9903 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
9904 for the first serial number and places 2 in the serial number file. This
9905 avoids problems when the root CA is created with serial number zero and
9906 the first user certificate has the same issuer name and serial number
9910 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
9911 the new code. Add documentation for this stuff.
9914 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
9915 X509_*() to X509at_*() on the grounds that they don't handle X509
9916 structures and behave in an analogous way to the X509v3 functions:
9917 they shouldn't be called directly but wrapper functions should be used
9920 So we also now have some wrapper functions that call the X509at functions
9921 when passed certificate requests. (TO DO: similar things can be done with
9922 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
9923 things. Some of these need some d2i or i2d and print functionality
9924 because they handle more complex structures.)
9927 *) Add missing #ifndefs that caused missing symbols when building libssl
9928 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
9929 NO_RSA in ssl/s2*.c.
9930 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
9932 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
9933 has a return value which indicates the quality of the random data
9934 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
9935 error queue. New function RAND_pseudo_bytes() generates output that is
9936 guaranteed to be unique but not unpredictable. RAND_add is like
9937 RAND_seed, but takes an extra argument for an entropy estimate
9938 (RAND_seed always assumes full entropy).
9941 *) Do more iterations of Rabin-Miller probable prime test (specifically,
9942 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
9943 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
9944 in crypto/bn/bn_prime.c for the complete table). This guarantees a
9945 false-positive rate of at most 2^-80 for random input.
9948 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
9951 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
9952 in the 0.9.5 release), this returns the chain
9953 from an X509_CTX structure with a dup of the stack and all
9954 the X509 reference counts upped: so the stack will exist
9955 after X509_CTX_cleanup() has been called. Modify pkcs12.c
9958 Also make SSL_SESSION_print() print out the verify return
9962 *) Add manpage for the pkcs12 command. Also change the default
9963 behaviour so MAC iteration counts are used unless the new
9964 -nomaciter option is used. This improves file security and
9965 only older versions of MSIE (4.0 for example) need it.
9968 *) Honor the no-xxx Configure options when creating .DEF files.
9971 *) Add PKCS#10 attributes to field table: challengePassword,
9972 unstructuredName and unstructuredAddress. These are taken from
9973 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
9974 international characters are used.
9976 More changes to X509_ATTRIBUTE code: allow the setting of types
9977 based on strings. Remove the 'loc' parameter when adding
9978 attributes because these will be a SET OF encoding which is sorted
9982 *) Initial changes to the 'req' utility to allow request generation
9983 automation. This will allow an application to just generate a template
9984 file containing all the field values and have req construct the
9987 Initial support for X509_ATTRIBUTE handling. Stacks of these are
9988 used all over the place including certificate requests and PKCS#7
9989 structures. They are currently handled manually where necessary with
9990 some primitive wrappers for PKCS#7. The new functions behave in a
9991 manner analogous to the X509 extension functions: they allow
9992 attributes to be looked up by NID and added.
9994 Later something similar to the X509V3 code would be desirable to
9995 automatically handle the encoding, decoding and printing of the
9996 more complex types. The string types like challengePassword can
9997 be handled by the string table functions.
9999 Also modified the multi byte string table handling. Now there is
10000 a 'global mask' which masks out certain types. The table itself
10001 can use the flag STABLE_NO_MASK to ignore the mask setting: this
10002 is useful when for example there is only one permissible type
10003 (as in countryName) and using the mask might result in no valid
10007 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
10008 SSL_get_peer_finished to allow applications to obtain the latest
10009 Finished messages sent to the peer or expected from the peer,
10010 respectively. (SSL_get_peer_finished is usually the Finished message
10011 actually received from the peer, otherwise the protocol will be aborted.)
10013 As the Finished message are message digests of the complete handshake
10014 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
10015 be used for external authentication procedures when the authentication
10016 provided by SSL/TLS is not desired or is not enough.
10019 *) Enhanced support for Alpha Linux is added. Now ./config checks if
10020 the host supports BWX extension and if Compaq C is present on the
10021 $PATH. Just exploiting of the BWX extension results in 20-30%
10022 performance kick for some algorithms, e.g. DES and RC4 to mention
10023 a couple. Compaq C in turn generates ~20% faster code for MD5 and
10027 *) Add support for MS "fast SGC". This is arguably a violation of the
10028 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
10029 weak crypto and after checking the certificate is SGC a second one
10030 with strong crypto. MS SGC stops the first handshake after receiving
10031 the server certificate message and sends a second client hello. Since
10032 a server will typically do all the time consuming operations before
10033 expecting any further messages from the client (server key exchange
10034 is the most expensive) there is little difference between the two.
10036 To get OpenSSL to support MS SGC we have to permit a second client
10037 hello message after we have sent server done. In addition we have to
10038 reset the MAC if we do get this second client hello.
10041 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
10042 if a DER encoded private key is RSA or DSA traditional format. Changed
10043 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
10044 format DER encoded private key. Newer code should use PKCS#8 format which
10045 has the key type encoded in the ASN1 structure. Added DER private key
10046 support to pkcs8 application.
10049 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
10050 ciphersuites has been selected (as required by the SSL 3/TLS 1
10051 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
10052 is set, we interpret this as a request to violate the specification
10053 (the worst that can happen is a handshake failure, and 'correct'
10054 behaviour would result in a handshake failure anyway).
10057 *) In SSL_CTX_add_session, take into account that there might be multiple
10058 SSL_SESSION structures with the same session ID (e.g. when two threads
10059 concurrently obtain them from an external cache).
10060 The internal cache can handle only one SSL_SESSION with a given ID,
10061 so if there's a conflict, we now throw out the old one to achieve
10065 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
10066 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
10067 some routines that use cipher OIDs: some ciphers do not have OIDs
10068 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
10072 *) Simplify the trust setting structure and code. Now we just have
10073 two sequences of OIDs for trusted and rejected settings. These will
10074 typically have values the same as the extended key usage extension
10075 and any application specific purposes.
10077 The trust checking code now has a default behaviour: it will just
10078 check for an object with the same NID as the passed id. Functions can
10079 be provided to override either the default behaviour or the behaviour
10080 for a given id. SSL client, server and email already have functions
10081 in place for compatibility: they check the NID and also return "trusted"
10082 if the certificate is self signed.
10085 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
10086 traditional format into an EVP_PKEY structure.
10089 *) Add a password callback function PEM_cb() which either prompts for
10090 a password if usr_data is NULL or otherwise assumes it is a null
10091 terminated password. Allow passwords to be passed on command line
10092 environment or config files in a few more utilities.
10095 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
10096 keys. Add some short names for PKCS#8 PBE algorithms and allow them
10097 to be specified on the command line for the pkcs8 and pkcs12 utilities.
10098 Update documentation.
10101 *) Support for ASN1 "NULL" type. This could be handled before by using
10102 ASN1_TYPE but there wasn't any function that would try to read a NULL
10103 and produce an error if it couldn't. For compatibility we also have
10104 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
10105 don't allocate anything because they don't need to.
10108 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
10110 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
10112 *) Rebuild of the memory allocation routines used by OpenSSL code and
10113 possibly others as well. The purpose is to make an interface that
10114 provide hooks so anyone can build a separate set of allocation and
10115 deallocation routines to be used by OpenSSL, for example memory
10116 pool implementations, or something else, which was previously hard
10117 since Malloc(), Realloc() and Free() were defined as macros having
10118 the values malloc, realloc and free, respectively (except for Win32
10119 compilations). The same is provided for memory debugging code.
10120 OpenSSL already comes with functionality to find memory leaks, but
10121 this gives people a chance to debug other memory problems.
10123 With these changes, a new set of functions and macros have appeared:
10125 CRYPTO_set_mem_debug_functions() [F]
10126 CRYPTO_get_mem_debug_functions() [F]
10127 CRYPTO_dbg_set_options() [F]
10128 CRYPTO_dbg_get_options() [F]
10129 CRYPTO_malloc_debug_init() [M]
10131 The memory debug functions are NULL by default, unless the library
10132 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
10133 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
10134 gives the standard debugging functions that come with OpenSSL) or
10135 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
10136 provided by the library user) must be used. When the standard
10137 debugging functions are used, CRYPTO_dbg_set_options can be used to
10138 request additional information:
10139 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
10140 the CRYPTO_MDEBUG_xxx macro when compiling the library.
10142 Also, things like CRYPTO_set_mem_functions will always give the
10143 expected result (the new set of functions is used for allocation
10144 and deallocation) at all times, regardless of platform and compiler
10147 To finish it up, some functions that were never use in any other
10148 way than through macros have a new API and new semantic:
10150 CRYPTO_dbg_malloc()
10151 CRYPTO_dbg_realloc()
10154 All macros of value have retained their old syntax.
10155 [Richard Levitte and Bodo Moeller]
10157 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
10158 ordering of SMIMECapabilities wasn't in "strength order" and there
10159 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
10163 *) Some ASN1 types with illegal zero length encoding (INTEGER,
10164 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
10165 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
10167 *) Merge in my S/MIME library for OpenSSL. This provides a simple
10168 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
10169 functionality to handle multipart/signed properly) and a utility
10170 called 'smime' to call all this stuff. This is based on code I
10171 originally wrote for Celo who have kindly allowed it to be
10172 included in OpenSSL.
10175 *) Add variants des_set_key_checked and des_set_key_unchecked of
10176 des_set_key (aka des_key_sched). Global variable des_check_key
10177 decides which of these is called by des_set_key; this way
10178 des_check_key behaves as it always did, but applications and
10179 the library itself, which was buggy for des_check_key == 1,
10180 have a cleaner way to pick the version they need.
10183 *) New function PKCS12_newpass() which changes the password of a
10187 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
10188 dynamic mix. In both cases the ids can be used as an index into the
10189 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
10190 functions so they accept a list of the field values and the
10191 application doesn't need to directly manipulate the X509_TRUST
10195 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
10199 *) Modify the way the V3 extension code looks up extensions. This now
10200 works in a similar way to the object code: we have some "standard"
10201 extensions in a static table which is searched with OBJ_bsearch()
10202 and the application can add dynamic ones if needed. The file
10203 crypto/x509v3/ext_dat.h now has the info: this file needs to be
10204 updated whenever a new extension is added to the core code and kept
10205 in ext_nid order. There is a simple program 'tabtest.c' which checks
10206 this. New extensions are not added too often so this file can readily
10207 be maintained manually.
10209 There are two big advantages in doing things this way. The extensions
10210 can be looked up immediately and no longer need to be "added" using
10211 X509V3_add_standard_extensions(): this function now does nothing.
10212 [Side note: I get *lots* of email saying the extension code doesn't
10213 work because people forget to call this function]
10214 Also no dynamic allocation is done unless new extensions are added:
10215 so if we don't add custom extensions there is no need to call
10216 X509V3_EXT_cleanup().
10219 *) Modify enc utility's salting as follows: make salting the default. Add a
10220 magic header, so unsalted files fail gracefully instead of just decrypting
10221 to garbage. This is because not salting is a big security hole, so people
10222 should be discouraged from doing it.
10225 *) Fixes and enhancements to the 'x509' utility. It allowed a message
10226 digest to be passed on the command line but it only used this
10227 parameter when signing a certificate. Modified so all relevant
10228 operations are affected by the digest parameter including the
10229 -fingerprint and -x509toreq options. Also -x509toreq choked if a
10230 DSA key was used because it didn't fix the digest.
10233 *) Initial certificate chain verify code. Currently tests the untrusted
10234 certificates for consistency with the verify purpose (which is set
10235 when the X509_STORE_CTX structure is set up) and checks the pathlength.
10237 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
10238 this is because it will reject chains with invalid extensions whereas
10239 every previous version of OpenSSL and SSLeay made no checks at all.
10241 Trust code: checks the root CA for the relevant trust settings. Trust
10242 settings have an initial value consistent with the verify purpose: e.g.
10243 if the verify purpose is for SSL client use it expects the CA to be
10244 trusted for SSL client use. However the default value can be changed to
10245 permit custom trust settings: one example of this would be to only trust
10246 certificates from a specific "secure" set of CAs.
10248 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
10249 which should be used for version portability: especially since the
10250 verify structure is likely to change more often now.
10252 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
10253 to set them. If not set then assume SSL clients will verify SSL servers
10256 Two new options to the verify program: -untrusted allows a set of
10257 untrusted certificates to be passed in and -purpose which sets the
10258 intended purpose of the certificate. If a purpose is set then the
10259 new chain verify code is used to check extension consistency.
10262 *) Support for the authority information access extension.
10265 *) Modify RSA and DSA PEM read routines to transparently handle
10266 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
10267 public keys in a format compatible with certificate
10268 SubjectPublicKeyInfo structures. Unfortunately there were already
10269 functions called *_PublicKey_* which used various odd formats so
10270 these are retained for compatibility: however the DSA variants were
10271 never in a public release so they have been deleted. Changed dsa/rsa
10272 utilities to handle the new format: note no releases ever handled public
10273 keys so we should be OK.
10275 The primary motivation for this change is to avoid the same fiasco
10276 that dogs private keys: there are several incompatible private key
10277 formats some of which are standard and some OpenSSL specific and
10278 require various evil hacks to allow partial transparent handling and
10279 even then it doesn't work with DER formats. Given the option anything
10280 other than PKCS#8 should be dumped: but the other formats have to
10281 stay in the name of compatibility.
10283 With public keys and the benefit of hindsight one standard format
10284 is used which works with EVP_PKEY, RSA or DSA structures: though
10285 it clearly returns an error if you try to read the wrong kind of key.
10287 Added a -pubkey option to the 'x509' utility to output the public key.
10288 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
10289 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
10290 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
10291 that do the same as the EVP_PKEY_assign_*() except they up the
10292 reference count of the added key (they don't "swallow" the
10296 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
10297 CRLs would fail if the file contained no certificates or no CRLs:
10298 added a new function to read in both types and return the number
10299 read: this means that if none are read it will be an error. The
10300 DER versions of the certificate and CRL reader would always fail
10301 because it isn't possible to mix certificates and CRLs in DER format
10302 without choking one or the other routine. Changed this to just read
10303 a certificate: this is the best we can do. Also modified the code
10304 in apps/verify.c to take notice of return codes: it was previously
10305 attempting to read in certificates from NULL pointers and ignoring
10306 any errors: this is one reason why the cert and CRL reader seemed
10307 to work. It doesn't check return codes from the default certificate
10308 routines: these may well fail if the certificates aren't installed.
10311 *) Code to support otherName option in GeneralName.
10314 *) First update to verify code. Change the verify utility
10315 so it warns if it is passed a self signed certificate:
10316 for consistency with the normal behaviour. X509_verify
10317 has been modified to it will now verify a self signed
10318 certificate if *exactly* the same certificate appears
10319 in the store: it was previously impossible to trust a
10320 single self signed certificate. This means that:
10321 openssl verify ss.pem
10322 now gives a warning about a self signed certificate but
10323 openssl verify -CAfile ss.pem ss.pem
10327 *) For servers, store verify_result in SSL_SESSION data structure
10328 (and add it to external session representation).
10329 This is needed when client certificate verifications fails,
10330 but an application-provided verification callback (set by
10331 SSL_CTX_set_cert_verify_callback) allows accepting the session
10332 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
10333 but returns 1): When the session is reused, we have to set
10334 ssl->verify_result to the appropriate error code to avoid
10336 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
10338 *) Fix a bug in the new PKCS#7 code: it didn't consider the
10339 case in PKCS7_dataInit() where the signed PKCS7 structure
10340 didn't contain any existing data because it was being created.
10341 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
10343 *) Add a salt to the key derivation routines in enc.c. This
10344 forms the first 8 bytes of the encrypted file. Also add a
10345 -S option to allow a salt to be input on the command line.
10348 *) New function X509_cmp(). Oddly enough there wasn't a function
10349 to compare two certificates. We do this by working out the SHA1
10350 hash and comparing that. X509_cmp() will be needed by the trust
10354 *) SSL_get1_session() is like SSL_get_session(), but increments
10355 the reference count in the SSL_SESSION returned.
10356 [Geoff Thorpe <geoff@eu.c2.net>]
10358 *) Fix for 'req': it was adding a null to request attributes.
10359 Also change the X509_LOOKUP and X509_INFO code to handle
10360 certificate auxiliary information.
10363 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
10367 *) Add the possibility to add extra information to the memory leak
10368 detecting output, to form tracebacks, showing from where each
10369 allocation was originated: CRYPTO_push_info("constant string") adds
10370 the string plus current file name and line number to a per-thread
10371 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
10372 is like calling CYRPTO_pop_info() until the stack is empty.
10373 Also updated memory leak detection code to be multi-thread-safe.
10376 *) Add options -text and -noout to pkcs7 utility and delete the
10377 encryption options which never did anything. Update docs.
10380 *) Add options to some of the utilities to allow the pass phrase
10381 to be included on either the command line (not recommended on
10382 OSes like Unix) or read from the environment. Update the
10383 manpages and fix a few bugs.
10386 *) Add a few manpages for some of the openssl commands.
10389 *) Fix the -revoke option in ca. It was freeing up memory twice,
10390 leaking and not finding already revoked certificates.
10393 *) Extensive changes to support certificate auxiliary information.
10394 This involves the use of X509_CERT_AUX structure and X509_AUX
10395 functions. An X509_AUX function such as PEM_read_X509_AUX()
10396 can still read in a certificate file in the usual way but it
10397 will also read in any additional "auxiliary information". By
10398 doing things this way a fair degree of compatibility can be
10399 retained: existing certificates can have this information added
10400 using the new 'x509' options.
10402 Current auxiliary information includes an "alias" and some trust
10403 settings. The trust settings will ultimately be used in enhanced
10404 certificate chain verification routines: currently a certificate
10405 can only be trusted if it is self signed and then it is trusted
10409 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
10410 The problem was that one of the replacement routines had not been working
10411 since SSLeay releases. For now the offending routine has been replaced
10412 with non-optimised assembler. Even so, this now gives around 95%
10413 performance improvement for 1024 bit RSA signs.
10416 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
10417 handling. Most clients have the effective key size in bits equal to
10418 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
10419 A few however don't do this and instead use the size of the decrypted key
10420 to determine the RC2 key length and the AlgorithmIdentifier to determine
10421 the effective key length. In this case the effective key length can still
10422 be 40 bits but the key length can be 168 bits for example. This is fixed
10423 by manually forcing an RC2 key into the EVP_PKEY structure because the
10424 EVP code can't currently handle unusual RC2 key sizes: it always assumes
10425 the key length and effective key length are equal.
10428 *) Add a bunch of functions that should simplify the creation of
10429 X509_NAME structures. Now you should be able to do:
10430 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
10431 and have it automatically work out the correct field type and fill in
10432 the structures. The more adventurous can try:
10433 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
10434 and it will (hopefully) work out the correct multibyte encoding.
10437 *) Change the 'req' utility to use the new field handling and multibyte
10438 copy routines. Before the DN field creation was handled in an ad hoc
10439 way in req, ca, and x509 which was rather broken and didn't support
10440 BMPStrings or UTF8Strings. Since some software doesn't implement
10441 BMPStrings or UTF8Strings yet, they can be enabled using the config file
10442 using the dirstring_type option. See the new comment in the default
10443 openssl.cnf for more info.
10446 *) Make crypto/rand/md_rand.c more robust:
10447 - Assure unique random numbers after fork().
10448 - Make sure that concurrent threads access the global counter and
10449 md serializably so that we never lose entropy in them
10450 or use exactly the same state in multiple threads.
10451 Access to the large state is not always serializable because
10452 the additional locking could be a performance killer, and
10453 md should be large enough anyway.
10456 *) New file apps/app_rand.c with commonly needed functionality
10457 for handling the random seed file.
10459 Use the random seed file in some applications that previously did not:
10461 dsaparam -genkey (which also ignored its '-rand' option),
10464 x509 (when signing).
10465 Except on systems with /dev/urandom, it is crucial to have a random
10466 seed file at least for key creation, DSA signing, and for DH exchanges;
10467 for RSA signatures we could do without one.
10469 gendh and gendsa (unlike genrsa) used to read only the first byte
10470 of each file listed in the '-rand' option. The function as previously
10471 found in genrsa is now in app_rand.c and is used by all programs
10472 that support '-rand'.
10475 *) In RAND_write_file, use mode 0600 for creating files;
10476 don't just chmod when it may be too late.
10479 *) Report an error from X509_STORE_load_locations
10480 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
10483 *) New function ASN1_mbstring_copy() this copies a string in either
10484 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
10485 into an ASN1_STRING type. A mask of permissible types is passed
10486 and it chooses the "minimal" type to use or an error if not type
10490 *) Add function equivalents to the various macros in asn1.h. The old
10491 macros are retained with an M_ prefix. Code inside the library can
10492 use the M_ macros. External code (including the openssl utility)
10493 should *NOT* in order to be "shared library friendly".
10496 *) Add various functions that can check a certificate's extensions
10497 to see if it usable for various purposes such as SSL client,
10498 server or S/MIME and CAs of these types. This is currently
10499 VERY EXPERIMENTAL but will ultimately be used for certificate chain
10500 verification. Also added a -purpose flag to x509 utility to
10501 print out all the purposes.
10504 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
10508 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
10509 for, obtain and decode and extension and obtain its critical flag.
10510 This allows all the necessary extension code to be handled in a
10511 single function call.
10514 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
10515 platforms. See crypto/rc4/rc4_enc.c for further details.
10518 *) New -noout option to asn1parse. This causes no output to be produced
10519 its main use is when combined with -strparse and -out to extract data
10520 from a file (which may not be in ASN.1 format).
10523 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
10524 when producing the local key id.
10525 [Richard Levitte <levitte@stacken.kth.se>]
10527 *) New option -dhparam in s_server. This allows a DH parameter file to be
10528 stated explicitly. If it is not stated then it tries the first server
10529 certificate file. The previous behaviour hard coded the filename
10533 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
10534 a public key to be input or output. For example:
10535 openssl rsa -in key.pem -pubout -out pubkey.pem
10536 Also added necessary DSA public key functions to handle this.
10539 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
10540 in the message. This was handled by allowing
10541 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
10542 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
10544 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
10545 to the end of the strings whereas this didn't. This would cause problems
10546 if strings read with d2i_ASN1_bytes() were later modified.
10547 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
10549 *) Fix for base64 decode bug. When a base64 bio reads only one line of
10550 data and it contains EOF it will end up returning an error. This is
10551 caused by input 46 bytes long. The cause is due to the way base64
10552 BIOs find the start of base64 encoded data. They do this by trying a
10553 trial decode on each line until they find one that works. When they
10554 do a flag is set and it starts again knowing it can pass all the
10555 data directly through the decoder. Unfortunately it doesn't reset
10556 the context it uses. This means that if EOF is reached an attempt
10557 is made to pass two EOFs through the context and this causes the
10558 resulting error. This can also cause other problems as well. As is
10559 usual with these problems it takes *ages* to find and the fix is
10560 trivial: move one line.
10561 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
10563 *) Ugly workaround to get s_client and s_server working under Windows. The
10564 old code wouldn't work because it needed to select() on sockets and the
10565 tty (for keypresses and to see if data could be written). Win32 only
10566 supports select() on sockets so we select() with a 1s timeout on the
10567 sockets and then see if any characters are waiting to be read, if none
10568 are present then we retry, we also assume we can always write data to
10569 the tty. This isn't nice because the code then blocks until we've
10570 received a complete line of data and it is effectively polling the
10571 keyboard at 1s intervals: however it's quite a bit better than not
10572 working at all :-) A dedicated Windows application might handle this
10573 with an event loop for example.
10576 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
10577 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
10578 will be called when RSA_sign() and RSA_verify() are used. This is useful
10579 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
10580 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
10581 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
10582 This necessitated the support of an extra signature type NID_md5_sha1
10583 for SSL signatures and modifications to the SSL library to use it instead
10584 of calling RSA_public_decrypt() and RSA_private_encrypt().
10587 *) Add new -verify -CAfile and -CApath options to the crl program, these
10588 will lookup a CRL issuers certificate and verify the signature in a
10589 similar way to the verify program. Tidy up the crl program so it
10590 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
10591 less strict. It will now permit CRL extensions even if it is not
10592 a V2 CRL: this will allow it to tolerate some broken CRLs.
10595 *) Initialize all non-automatic variables each time one of the openssl
10596 sub-programs is started (this is necessary as they may be started
10597 multiple times from the "OpenSSL>" prompt).
10598 [Lennart Bang, Bodo Moeller]
10600 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
10601 removing all other RSA functionality (this is what NO_RSA does). This
10602 is so (for example) those in the US can disable those operations covered
10603 by the RSA patent while allowing storage and parsing of RSA keys and RSA
10607 *) Non-copying interface to BIO pairs.
10608 (still largely untested)
10611 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
10612 ASCII string. This was handled independently in various places before.
10615 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
10616 UTF8 strings a character at a time.
10619 *) Use client_version from client hello to select the protocol
10620 (s23_srvr.c) and for RSA client key exchange verification
10621 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
10624 *) Add various utility functions to handle SPKACs, these were previously
10625 handled by poking round in the structure internals. Added new function
10626 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
10627 print, verify and generate SPKACs. Based on an original idea from
10628 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
10631 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
10634 *) Allow the config file extension section to be overwritten on the
10635 command line. Based on an original idea from Massimiliano Pala
10636 <madwolf@comune.modena.it>. The new option is called -extensions
10637 and can be applied to ca, req and x509. Also -reqexts to override
10638 the request extensions in req and -crlexts to override the crl extensions
10642 *) Add new feature to the SPKAC handling in ca. Now you can include
10643 the same field multiple times by preceding it by "XXXX." for example:
10646 this is the same syntax as used in the req config file.
10649 *) Allow certificate extensions to be added to certificate requests. These
10650 are specified in a 'req_extensions' option of the req section of the
10651 config file. They can be printed out with the -text option to req but
10652 are otherwise ignored at present.
10655 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
10656 data read consists of only the final block it would not decrypted because
10657 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
10658 A misplaced 'break' also meant the decrypted final block might not be
10659 copied until the next read.
10662 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
10663 a few extra parameters to the DH structure: these will be useful if
10664 for example we want the value of 'q' or implement X9.42 DH.
10667 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
10668 provides hooks that allow the default DSA functions or functions on a
10669 "per key" basis to be replaced. This allows hardware acceleration and
10670 hardware key storage to be handled without major modification to the
10671 library. Also added low level modexp hooks and CRYPTO_EX structure and
10672 associated functions.
10675 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
10676 as "read only": it can't be written to and the buffer it points to will
10677 not be freed. Reading from a read only BIO is much more efficient than
10678 a normal memory BIO. This was added because there are several times when
10679 an area of memory needs to be read from a BIO. The previous method was
10680 to create a memory BIO and write the data to it, this results in two
10681 copies of the data and an O(n^2) reading algorithm. There is a new
10682 function BIO_new_mem_buf() which creates a read only memory BIO from
10683 an area of memory. Also modified the PKCS#7 routines to use read only
10687 *) Bugfix: ssl23_get_client_hello did not work properly when called in
10688 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
10689 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
10690 but a retry condition occurred while trying to read the rest.
10693 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
10694 NID_pkcs7_encrypted by default: this was wrong since this should almost
10695 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
10696 the encrypted data type: this is a more sensible place to put it and it
10697 allows the PKCS#12 code to be tidied up that duplicated this
10701 *) Changed obj_dat.pl script so it takes its input and output files on
10702 the command line. This should avoid shell escape redirection problems
10706 *) Initial support for certificate extension requests, these are included
10707 in things like Xenroll certificate requests. Included functions to allow
10708 extensions to be obtained and added.
10711 *) -crlf option to s_client and s_server for sending newlines as
10712 CRLF (as required by many protocols).
10715 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
10717 *) Install libRSAglue.a when OpenSSL is built with RSAref.
10718 [Ralf S. Engelschall]
10720 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
10721 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
10723 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
10727 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
10728 DH parameters/keys (q is lost during that conversion, but the resulting
10729 DH parameters contain its length).
10731 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
10732 much faster than DH_generate_parameters (which creates parameters
10733 where p = 2*q + 1), and also the smaller q makes DH computations
10734 much more efficient (160-bit exponentiation instead of 1024-bit
10735 exponentiation); so this provides a convenient way to support DHE
10736 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
10737 utter importance to use
10738 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
10740 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
10741 when such DH parameters are used, because otherwise small subgroup
10742 attacks may become possible!
10745 *) Avoid memory leak in i2d_DHparams.
10748 *) Allow the -k option to be used more than once in the enc program:
10749 this allows the same encrypted message to be read by multiple recipients.
10752 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
10753 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
10754 it will always use the numerical form of the OID, even if it has a short
10758 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
10759 method only got called if p,q,dmp1,dmq1,iqmp components were present,
10760 otherwise bn_mod_exp was called. In the case of hardware keys for example
10761 no private key components need be present and it might store extra data
10762 in the RSA structure, which cannot be accessed from bn_mod_exp.
10763 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
10764 private key operations.
10767 *) Added support for SPARC Linux.
10770 *) pem_password_cb function type incompatibly changed from
10771 typedef int pem_password_cb(char *buf, int size, int rwflag);
10773 ....(char *buf, int size, int rwflag, void *userdata);
10774 so that applications can pass data to their callbacks:
10775 The PEM[_ASN1]_{read,write}... functions and macros now take an
10776 additional void * argument, which is just handed through whenever
10777 the password callback is called.
10778 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
10780 New function SSL_CTX_set_default_passwd_cb_userdata.
10782 Compatibility note: As many C implementations push function arguments
10783 onto the stack in reverse order, the new library version is likely to
10784 interoperate with programs that have been compiled with the old
10785 pem_password_cb definition (PEM_whatever takes some data that
10786 happens to be on the stack as its last argument, and the callback
10787 just ignores this garbage); but there is no guarantee whatsoever that
10790 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
10791 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
10792 problems not only on Windows, but also on some Unix platforms.
10793 To avoid problematic command lines, these definitions are now in an
10794 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
10795 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
10798 *) MIPS III/IV assembler module is reimplemented.
10801 *) More DES library cleanups: remove references to srand/rand and
10802 delete an unused file.
10805 *) Add support for the the free Netwide assembler (NASM) under Win32,
10806 since not many people have MASM (ml) and it can be hard to obtain.
10807 This is currently experimental but it seems to work OK and pass all
10808 the tests. Check out INSTALL.W32 for info.
10811 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
10812 without temporary keys kept an extra copy of the server key,
10813 and connections with temporary keys did not free everything in case
10817 *) New function RSA_check_key and new openssl rsa option -check
10818 for verifying the consistency of RSA keys.
10819 [Ulf Moeller, Bodo Moeller]
10821 *) Various changes to make Win32 compile work:
10822 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
10823 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
10824 comparison" warnings.
10825 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
10828 *) Add a debugging option to PKCS#5 v2 key generation function: when
10829 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
10830 derived keys are printed to stderr.
10833 *) Copy the flags in ASN1_STRING_dup().
10834 [Roman E. Pavlov <pre@mo.msk.ru>]
10836 *) The x509 application mishandled signing requests containing DSA
10837 keys when the signing key was also DSA and the parameters didn't match.
10839 It was supposed to omit the parameters when they matched the signing key:
10840 the verifying software was then supposed to automatically use the CA's
10841 parameters if they were absent from the end user certificate.
10843 Omitting parameters is no longer recommended. The test was also
10844 the wrong way round! This was probably due to unusual behaviour in
10845 EVP_cmp_parameters() which returns 1 if the parameters match.
10846 This meant that parameters were omitted when they *didn't* match and
10847 the certificate was useless. Certificates signed with 'ca' didn't have
10849 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
10851 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
10852 The interface is as follows:
10853 Applications can use
10854 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
10855 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
10856 "off" is now the default.
10857 The library internally uses
10858 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
10859 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
10860 to disable memory-checking temporarily.
10862 Some inconsistent states that previously were possible (and were
10863 even the default) are now avoided.
10865 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
10866 with each memory chunk allocated; this is occasionally more helpful
10867 than just having a counter.
10869 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
10871 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
10875 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
10876 which largely parallels "options", but is for changing API behaviour,
10877 whereas "options" are about protocol behaviour.
10878 Initial "mode" flags are:
10880 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
10881 a single record has been written.
10882 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
10883 retries use the same buffer location.
10884 (But all of the contents must be
10888 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
10891 *) Fix problems with no-hmac etc.
10892 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
10894 *) New functions RSA_get_default_method(), RSA_set_method() and
10895 RSA_get_method(). These allows replacement of RSA_METHODs without having
10896 to mess around with the internals of an RSA structure.
10899 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
10900 Also really enable memory leak checks in openssl.c and in some
10902 [Chad C. Mulligan, Bodo Moeller]
10904 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
10905 up the length of negative integers. This has now been simplified to just
10906 store the length when it is first determined and use it later, rather
10907 than trying to keep track of where data is copied and updating it to
10909 [Steve Henson, reported by Brien Wheeler
10910 <bwheeler@authentica-security.com>]
10912 *) Add a new function PKCS7_signatureVerify. This allows the verification
10913 of a PKCS#7 signature but with the signing certificate passed to the
10914 function itself. This contrasts with PKCS7_dataVerify which assumes the
10915 certificate is present in the PKCS#7 structure. This isn't always the
10916 case: certificates can be omitted from a PKCS#7 structure and be
10917 distributed by "out of band" means (such as a certificate database).
10920 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
10921 function prototypes in pem.h, also change util/mkdef.pl to add the
10922 necessary function names.
10925 *) mk1mf.pl (used by Windows builds) did not properly read the
10926 options set by Configure in the top level Makefile, and Configure
10927 was not even able to write more than one option correctly.
10928 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
10931 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
10932 file to be loaded from a BIO or FILE pointer. The BIO version will
10933 for example allow memory BIOs to contain config info.
10936 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
10937 Whoever hopes to achieve shared-library compatibility across versions
10938 must use this, not the compile-time macro.
10939 (Exercise 0.9.4: Which is the minimum library version required by
10941 Note: All this applies only to multi-threaded programs, others don't
10945 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
10946 through a BIO pair triggered the default case, i.e.
10947 SSLerr(...,SSL_R_UNKNOWN_STATE).
10950 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
10951 can use the SSL library even if none of the specific BIOs is
10955 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
10956 for the encoded length.
10957 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
10959 *) Add initial documentation of the X509V3 functions.
10962 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
10963 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
10964 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
10965 secure PKCS#8 private key format with a high iteration count.
10968 *) Fix determination of Perl interpreter: A perl or perl5
10969 _directory_ in $PATH was also accepted as the interpreter.
10970 [Ralf S. Engelschall]
10972 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
10973 wrong with it but it was very old and did things like calling
10974 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
10975 unusual formatting.
10978 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
10979 to use the new extension code.
10982 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
10983 with macros. This should make it easier to change their form, add extra
10984 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
10988 *) Add to configuration table a new entry that can specify an alternative
10989 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
10990 according to Mark Crispin <MRC@Panda.COM>.
10994 *) DES CBC did not update the IV. Weird.
10997 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
10998 Changing the behaviour of the former might break existing programs --
10999 where IV updating is needed, des_ncbc_encrypt can be used.
11002 *) When bntest is run from "make test" it drives bc to check its
11003 calculations, as well as internally checking them. If an internal check
11004 fails, it needs to cause bc to give a non-zero result or make test carries
11005 on without noticing the failure. Fixed.
11008 *) DES library cleanups.
11011 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
11012 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
11013 ciphers. NOTE: although the key derivation function has been verified
11014 against some published test vectors it has not been extensively tested
11015 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
11019 *) Instead of "mkdir -p", which is not fully portable, use new
11020 Perl script "util/mkdir-p.pl".
11023 *) Rewrite the way password based encryption (PBE) is handled. It used to
11024 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
11025 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
11026 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
11027 the 'parameter' field of the AlgorithmIdentifier is passed to the
11028 underlying key generation function so it must do its own ASN1 parsing.
11029 This has also changed the EVP_PBE_CipherInit() function which now has a
11030 'parameter' argument instead of literal salt and iteration count values
11031 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
11034 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
11035 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
11036 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
11037 KEY" because this clashed with PKCS#8 unencrypted string. Since this
11038 value was just used as a "magic string" and not used directly its
11039 value doesn't matter.
11042 *) Introduce some semblance of const correctness to BN. Shame C doesn't
11046 *) "linux-sparc64" configuration (ultrapenguin).
11047 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
11048 "linux-sparc" configuration.
11049 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
11051 *) config now generates no-xxx options for missing ciphers.
11054 *) Support the EBCDIC character set (work in progress).
11055 File ebcdic.c not yet included because it has a different license.
11056 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
11058 *) Support BS2000/OSD-POSIX.
11059 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
11061 *) Make callbacks for key generation use void * instead of char *.
11064 *) Make S/MIME samples compile (not yet tested).
11067 *) Additional typesafe stacks.
11070 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
11074 Changes between 0.9.3 and 0.9.3a [29 May 1999]
11076 *) New configuration variant "sco5-gcc".
11078 *) Updated some demos.
11079 [Sean O Riordain, Wade Scholine]
11081 *) Add missing BIO_free at exit of pkcs12 application.
11084 *) Fix memory leak in conf.c.
11087 *) Updates for Win32 to assembler version of MD5.
11090 *) Set #! path to perl in apps/der_chop to where we found it
11091 instead of using a fixed path.
11094 *) SHA library changes for irix64-mips4-cc.
11097 *) Improvements for VMS support.
11101 Changes between 0.9.2b and 0.9.3 [24 May 1999]
11103 *) Bignum library bug fix. IRIX 6 passes "make test" now!
11104 This also avoids the problems with SC4.2 and unpatched SC5.
11105 [Andy Polyakov <appro@fy.chalmers.se>]
11107 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
11108 These are required because of the typesafe stack would otherwise break
11109 existing code. If old code used a structure member which used to be STACK
11110 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
11111 sk_num or sk_value it would produce an error because the num, data members
11112 are not present in STACK_OF. Now it just produces a warning. sk_set
11113 replaces the old method of assigning a value to sk_value
11114 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
11115 that does this will no longer work (and should use sk_set instead) but
11116 this could be regarded as a "questionable" behaviour anyway.
11119 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
11120 correctly handle encrypted S/MIME data.
11123 *) Change type of various DES function arguments from des_cblock
11124 (which means, in function argument declarations, pointer to char)
11125 to des_cblock * (meaning pointer to array with 8 char elements),
11126 which allows the compiler to do more typechecking; it was like
11127 that back in SSLeay, but with lots of ugly casts.
11129 Introduce new type const_des_cblock.
11132 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
11133 problems: find RecipientInfo structure that matches recipient certificate
11134 and initialise the ASN1 structures properly based on passed cipher.
11137 *) Belatedly make the BN tests actually check the results.
11140 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
11141 to and from BNs: it was completely broken. New compilation option
11142 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
11143 key elements as negative integers.
11146 *) Reorganize and speed up MD5.
11147 [Andy Polyakov <appro@fy.chalmers.se>]
11150 [Richard Levitte <richard@levitte.org>]
11152 *) New option -out to asn1parse to allow the parsed structure to be
11153 output to a file. This is most useful when combined with the -strparse
11154 option to examine the output of things like OCTET STRINGS.
11157 *) Make SSL library a little more fool-proof by not requiring any longer
11158 that SSL_set_{accept,connect}_state be called before
11159 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
11160 in many applications because usually everything *appeared* to work as
11161 intended anyway -- now it really works as intended).
11164 *) Move openssl.cnf out of lib/.
11167 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
11168 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
11169 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
11170 [Ralf S. Engelschall]
11172 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
11173 handle PKCS#7 enveloped data properly.
11174 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
11176 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
11177 copying pointers. The cert_st handling is changed by this in
11178 various ways (and thus what used to be known as ctx->default_cert
11179 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
11180 any longer when s->cert does not give us what we need).
11181 ssl_cert_instantiate becomes obsolete by this change.
11182 As soon as we've got the new code right (possibly it already is?),
11183 we have solved a couple of bugs of the earlier code where s->cert
11184 was used as if it could not have been shared with other SSL structures.
11186 Note that using the SSL API in certain dirty ways now will result
11187 in different behaviour than observed with earlier library versions:
11188 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
11189 does not influence s as it used to.
11191 In order to clean up things more thoroughly, inside SSL_SESSION
11192 we don't use CERT any longer, but a new structure SESS_CERT
11193 that holds per-session data (if available); currently, this is
11194 the peer's certificate chain and, for clients, the server's certificate
11195 and temporary key. CERT holds only those values that can have
11196 meaningful defaults in an SSL_CTX.
11199 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
11200 from the internal representation. Various PKCS#7 fixes: remove some
11201 evil casts and set the enc_dig_alg field properly based on the signing
11205 *) Allow PKCS#12 password to be set from the command line or the
11206 environment. Let 'ca' get its config file name from the environment
11207 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
11211 *) Allow certificate policies extension to use an IA5STRING for the
11212 organization field. This is contrary to the PKIX definition but
11213 VeriSign uses it and IE5 only recognises this form. Document 'x509'
11217 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
11218 without disallowing inline assembler and the like for non-pedantic builds.
11221 *) Support Borland C++ builder.
11222 [Janez Jere <jj@void.si>, modified by Ulf Möller]
11224 *) Support Mingw32.
11227 *) SHA-1 cleanups and performance enhancements.
11228 [Andy Polyakov <appro@fy.chalmers.se>]
11230 *) Sparc v8plus assembler for the bignum library.
11231 [Andy Polyakov <appro@fy.chalmers.se>]
11233 *) Accept any -xxx and +xxx compiler options in Configure.
11236 *) Update HPUX configuration.
11239 *) Add missing sk_<type>_unshift() function to safestack.h
11240 [Ralf S. Engelschall]
11242 *) New function SSL_CTX_use_certificate_chain_file that sets the
11243 "extra_cert"s in addition to the certificate. (This makes sense
11244 only for "PEM" format files, as chains as a whole are not
11248 *) Support verify_depth from the SSL API.
11249 x509_vfy.c had what can be considered an off-by-one-error:
11250 Its depth (which was not part of the external interface)
11251 was actually counting the number of certificates in a chain;
11252 now it really counts the depth.
11255 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
11256 instead of X509err, which often resulted in confusing error
11257 messages since the error codes are not globally unique
11258 (e.g. an alleged error in ssl3_accept when a certificate
11259 didn't match the private key).
11261 *) New function SSL_CTX_set_session_id_context that allows to set a default
11262 value (so that you don't need SSL_set_session_id_context for each
11263 connection using the SSL_CTX).
11266 *) OAEP decoding bug fix.
11269 *) Support INSTALL_PREFIX for package builders, as proposed by
11273 *) New Configure options "threads" and "no-threads". For systems
11274 where the proper compiler options are known (currently Solaris
11275 and Linux), "threads" is the default.
11278 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
11281 *) Install various scripts to $(OPENSSLDIR)/misc, not to
11282 $(INSTALLTOP)/bin -- they shouldn't clutter directories
11283 such as /usr/local/bin.
11286 *) "make linux-shared" to build shared libraries.
11287 [Niels Poppe <niels@netbox.org>]
11289 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
11292 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
11293 extension adding in x509 utility.
11296 *) Remove NOPROTO sections and error code comments.
11299 *) Partial rewrite of the DEF file generator to now parse the ANSI
11303 *) New Configure options --prefix=DIR and --openssldir=DIR.
11306 *) Complete rewrite of the error code script(s). It is all now handled
11307 by one script at the top level which handles error code gathering,
11308 header rewriting and C source file generation. It should be much better
11309 than the old method: it now uses a modified version of Ulf's parser to
11310 read the ANSI prototypes in all header files (thus the old K&R definitions
11311 aren't needed for error creation any more) and do a better job of
11312 translating function codes into names. The old 'ASN1 error code imbedded
11313 in a comment' is no longer necessary and it doesn't use .err files which
11314 have now been deleted. Also the error code call doesn't have to appear all
11315 on one line (which resulted in some large lines...).
11318 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
11321 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
11322 0 (which usually indicates a closed connection), but continue reading.
11325 *) Fix some race conditions.
11328 *) Add support for CRL distribution points extension. Add Certificate
11329 Policies and CRL distribution points documentation.
11332 *) Move the autogenerated header file parts to crypto/opensslconf.h.
11335 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
11336 8 of keying material. Merlin has also confirmed interop with this fix
11337 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
11338 [Merlin Hughes <merlin@baltimore.ie>]
11340 *) Fix lots of warnings.
11341 [Richard Levitte <levitte@stacken.kth.se>]
11343 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
11344 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
11345 [Richard Levitte <levitte@stacken.kth.se>]
11347 *) Fix problems with sizeof(long) == 8.
11348 [Andy Polyakov <appro@fy.chalmers.se>]
11350 *) Change functions to ANSI C.
11353 *) Fix typos in error codes.
11354 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
11356 *) Remove defunct assembler files from Configure.
11359 *) SPARC v8 assembler BIGNUM implementation.
11360 [Andy Polyakov <appro@fy.chalmers.se>]
11362 *) Support for Certificate Policies extension: both print and set.
11363 Various additions to support the r2i method this uses.
11366 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
11367 return a const string when you are expecting an allocated buffer.
11370 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
11371 types DirectoryString and DisplayText.
11374 *) Add code to allow r2i extensions to access the configuration database,
11375 add an LHASH database driver and add several ctx helper functions.
11378 *) Fix an evil bug in bn_expand2() which caused various BN functions to
11379 fail when they extended the size of a BIGNUM.
11382 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
11383 support typesafe stack.
11386 *) Fix typo in SSL_[gs]et_options().
11387 [Nils Frostberg <nils@medcom.se>]
11389 *) Delete various functions and files that belonged to the (now obsolete)
11390 old X509V3 handling code.
11393 *) New Configure option "rsaref".
11396 *) Don't auto-generate pem.h.
11399 *) Introduce type-safe ASN.1 SETs.
11402 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
11403 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
11405 *) Introduce type-safe STACKs. This will almost certainly break lots of code
11406 that links with OpenSSL (well at least cause lots of warnings), but fear
11407 not: the conversion is trivial, and it eliminates loads of evil casts. A
11408 few STACKed things have been converted already. Feel free to convert more.
11409 In the fullness of time, I'll do away with the STACK type altogether.
11412 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
11413 specified in <certfile> by updating the entry in the index.txt file.
11414 This way one no longer has to edit the index.txt file manually for
11415 revoking a certificate. The -revoke option does the gory details now.
11416 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
11418 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
11419 `-text' option at all and this way the `-noout -text' combination was
11420 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
11421 [Ralf S. Engelschall]
11423 *) Make sure a corresponding plain text error message exists for the
11424 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
11425 verify callback function determined that a certificate was revoked.
11426 [Ralf S. Engelschall]
11428 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
11429 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
11430 all available cipers including rc5, which was forgotten until now.
11431 In order to let the testing shell script know which algorithms
11432 are available, a new (up to now undocumented) command
11433 "openssl list-cipher-commands" is used.
11436 *) Bugfix: s_client occasionally would sleep in select() when
11437 it should have checked SSL_pending() first.
11440 *) New functions DSA_do_sign and DSA_do_verify to provide access to
11441 the raw DSA values prior to ASN.1 encoding.
11444 *) Tweaks to Configure
11445 [Niels Poppe <niels@netbox.org>]
11447 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
11451 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
11454 *) New config option to avoid instructions that are illegal on the 80386.
11455 The default code is faster, but requires at least a 486.
11458 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
11459 SSL2_SERVER_VERSION (not used at all) macros, which are now the
11460 same as SSL2_VERSION anyway.
11463 *) New "-showcerts" option for s_client.
11466 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
11467 application. Various cleanups and fixes.
11470 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
11471 modify error routines to work internally. Add error codes and PBE init
11472 to library startup routines.
11475 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
11476 packing functions to asn1 and evp. Changed function names and error
11477 codes along the way.
11480 *) PKCS12 integration: and so it begins... First of several patches to
11481 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
11482 objects to objects.h
11485 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
11486 and display support for Thawte strong extranet extension.
11489 *) Add LinuxPPC support.
11490 [Jeff Dubrule <igor@pobox.org>]
11492 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
11493 bn_div_words in alpha.s.
11494 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
11496 *) Make sure the RSA OAEP test is skipped under -DRSAref because
11497 OAEP isn't supported when OpenSSL is built with RSAref.
11498 [Ulf Moeller <ulf@fitug.de>]
11500 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
11501 so they no longer are missing under -DNOPROTO.
11502 [Soren S. Jorvang <soren@t.dk>]
11505 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
11507 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
11508 doesn't work when the session is reused. Coming soon!
11511 *) Fix a security hole, that allows sessions to be reused in the wrong
11512 context thus bypassing client cert protection! All software that uses
11513 client certs and session caches in multiple contexts NEEDS PATCHING to
11514 allow session reuse! A fuller solution is in the works.
11515 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
11517 *) Some more source tree cleanups (removed obsolete files
11518 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
11519 permission on "config" script to be executable) and a fix for the INSTALL
11521 [Ulf Moeller <ulf@fitug.de>]
11523 *) Remove some legacy and erroneous uses of malloc, free instead of
11525 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
11527 *) Make rsa_oaep_test return non-zero on error.
11528 [Ulf Moeller <ulf@fitug.de>]
11530 *) Add support for native Solaris shared libraries. Configure
11531 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
11532 if someone would make that last step automatic.
11533 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
11535 *) ctx_size was not built with the right compiler during "make links". Fixed.
11538 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
11539 except NULL ciphers". This means the default cipher list will no longer
11540 enable NULL ciphers. They need to be specifically enabled e.g. with
11541 the string "DEFAULT:eNULL".
11544 *) Fix to RSA private encryption routines: if p < q then it would
11545 occasionally produce an invalid result. This will only happen with
11546 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
11549 *) Be less restrictive and allow also `perl util/perlpath.pl
11550 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
11551 because this way one can also use an interpreter named `perl5' (which is
11552 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
11553 installed as `perl').
11554 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11556 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
11557 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11559 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
11560 advapi32.lib to Win32 build and change the pem test comparison
11561 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
11562 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
11563 and crypto/des/ede_cbcm_enc.c.
11566 *) DES quad checksum was broken on big-endian architectures. Fixed.
11569 *) Comment out two functions in bio.h that aren't implemented. Fix up the
11570 Win32 test batch file so it (might) work again. The Win32 test batch file
11571 is horrible: I feel ill....
11574 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
11575 in e_os.h. Audit of header files to check ANSI and non ANSI
11576 sections: 10 functions were absent from non ANSI section and not exported
11577 from Windows DLLs. Fixed up libeay.num for new functions.
11580 *) Make `openssl version' output lines consistent.
11581 [Ralf S. Engelschall]
11583 *) Fix Win32 symbol export lists for BIO functions: Added
11584 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
11585 to ms/libeay{16,32}.def.
11586 [Ralf S. Engelschall]
11588 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
11589 fine under Unix and passes some trivial tests I've now added. But the
11590 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
11591 added to make sure no one expects that this stuff really works in the
11592 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
11593 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
11595 [Ralf S. Engelschall]
11597 *) Fix the generation of two part addresses in perl.
11598 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
11600 *) Add config entry for Linux on MIPS.
11601 [John Tobey <jtobey@channel1.com>]
11603 *) Make links whenever Configure is run, unless we are on Windoze.
11606 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
11607 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
11611 *) Add a useful kludge to allow package maintainers to specify compiler and
11612 other platforms details on the command line without having to patch the
11613 Configure script everytime: One now can use ``perl Configure
11614 <id>:<details>'', i.e. platform ids are allowed to have details appended
11615 to them (separated by colons). This is treated as there would be a static
11616 pre-configured entry in Configure's %table under key <id> with value
11617 <details> and ``perl Configure <id>'' is called. So, when you want to
11618 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
11619 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
11620 now, which overrides the FreeBSD-elf entry on-the-fly.
11621 [Ralf S. Engelschall]
11623 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
11626 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
11627 on the `perl Configure ...' command line. This way one can compile
11628 OpenSSL libraries with Position Independent Code (PIC) which is needed
11629 for linking it into DSOs.
11630 [Ralf S. Engelschall]
11632 *) Remarkably, export ciphers were totally broken and no-one had noticed!
11636 *) Cleaned up the LICENSE document: The official contact for any license
11637 questions now is the OpenSSL core team under openssl-core@openssl.org.
11638 And add a paragraph about the dual-license situation to make sure people
11639 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
11640 to the OpenSSL toolkit.
11641 [Ralf S. Engelschall]
11643 *) General source tree makefile cleanups: Made `making xxx in yyy...'
11644 display consistent in the source tree and replaced `/bin/rm' by `rm'.
11645 Additionally cleaned up the `make links' target: Remove unnecessary
11646 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
11647 to speed processing and no longer clutter the display with confusing
11648 stuff. Instead only the actually done links are displayed.
11649 [Ralf S. Engelschall]
11651 *) Permit null encryption ciphersuites, used for authentication only. It used
11652 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
11653 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
11657 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
11658 signed attributes when verifying signatures (this would break them),
11659 the detached data encoding was wrong and public keys obtained using
11660 X509_get_pubkey() weren't freed.
11663 *) Add text documentation for the BUFFER functions. Also added a work around
11664 to a Win95 console bug. This was triggered by the password read stuff: the
11665 last character typed gets carried over to the next fread(). If you were
11666 generating a new cert request using 'req' for example then the last
11667 character of the passphrase would be CR which would then enter the first
11671 *) Added the new `Includes OpenSSL Cryptography Software' button as
11672 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
11673 button and can be used by applications based on OpenSSL to show the
11674 relationship to the OpenSSL project.
11675 [Ralf S. Engelschall]
11677 *) Remove confusing variables in function signatures in files
11678 ssl/ssl_lib.c and ssl/ssl.h.
11679 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11681 *) Don't install bss_file.c under PREFIX/include/
11682 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11684 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
11685 functions that return function pointers and has support for NT specific
11686 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
11687 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
11688 unsigned to signed types: this was killing the Win32 compile.
11691 *) Add new certificate file to stack functions,
11692 SSL_add_dir_cert_subjects_to_stack() and
11693 SSL_add_file_cert_subjects_to_stack(). These largely supplant
11694 SSL_load_client_CA_file(), and can be used to add multiple certs easily
11695 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
11696 This means that Apache-SSL and similar packages don't have to mess around
11697 to add as many CAs as they want to the preferred list.
11700 *) Experiment with doxygen documentation. Currently only partially applied to
11702 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
11703 openssl.doxy as the configuration file.
11706 *) Get rid of remaining C++-style comments which strict C compilers hate.
11707 [Ralf S. Engelschall, pointed out by Carlos Amengual]
11709 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
11710 compiled in by default: it has problems with large keys.
11713 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
11714 DH private keys and/or callback functions which directly correspond to
11715 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
11716 is needed for applications which have to configure certificates on a
11717 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
11719 For the RSA certificate situation is makes no difference, but
11720 for the DSA certificate situation this fixes the "no shared cipher"
11721 problem where the OpenSSL cipher selection procedure failed because the
11722 temporary keys were not overtaken from the context and the API provided
11723 no way to reconfigure them.
11724 The new functions now let applications reconfigure the stuff and they
11725 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
11726 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
11727 non-public-API function ssl_cert_instantiate() is used as a helper
11728 function and also to reduce code redundancy inside ssl_rsa.c.
11729 [Ralf S. Engelschall]
11731 *) Move s_server -dcert and -dkey options out of the undocumented feature
11732 area because they are useful for the DSA situation and should be
11733 recognized by the users.
11734 [Ralf S. Engelschall]
11736 *) Fix the cipher decision scheme for export ciphers: the export bits are
11737 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
11738 SSL_EXP_MASK. So, the original variable has to be used instead of the
11739 already masked variable.
11740 [Richard Levitte <levitte@stacken.kth.se>]
11742 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
11743 [Richard Levitte <levitte@stacken.kth.se>]
11745 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
11746 from `int' to `unsigned int' because it's a length and initialized by
11747 EVP_DigestFinal() which expects an `unsigned int *'.
11748 [Richard Levitte <levitte@stacken.kth.se>]
11750 *) Don't hard-code path to Perl interpreter on shebang line of Configure
11751 script. Instead use the usual Shell->Perl transition trick.
11752 [Ralf S. Engelschall]
11754 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
11755 (in addition to RSA certificates) to match the behaviour of `openssl dsa
11756 -noout -modulus' as it's already the case for `openssl rsa -noout
11757 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
11758 currently the public key is printed (a decision which was already done by
11759 `openssl dsa -modulus' in the past) which serves a similar purpose.
11760 Additionally the NO_RSA no longer completely removes the whole -modulus
11761 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
11763 [Ralf S. Engelschall]
11765 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
11766 BIO. See the source (crypto/evp/bio_ok.c) for more info.
11767 [Arne Ansper <arne@ats.cyber.ee>]
11769 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
11770 to be added. Now both 'req' and 'ca' can use new objects defined in the
11774 *) Add cool BIO that does syslog (or event log on NT).
11775 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
11777 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
11778 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
11779 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
11780 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
11783 *) Add preliminary config info for new extension code.
11786 *) Make RSA_NO_PADDING really use no padding.
11787 [Ulf Moeller <ulf@fitug.de>]
11789 *) Generate errors when private/public key check is done.
11792 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
11793 for some CRL extensions and new objects added.
11796 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
11797 key usage extension and fuller support for authority key id.
11800 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
11801 padding method for RSA, which is recommended for new applications in PKCS
11802 #1 v2.0 (RFC 2437, October 1998).
11803 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
11804 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
11805 against Bleichbacher's attack on RSA.
11806 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
11809 *) Updates to the new SSL compression code
11810 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11812 *) Fix so that the version number in the master secret, when passed
11813 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
11814 (because the server will not accept higher), that the version number
11815 is 0x03,0x01, not 0x03,0x00
11816 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11818 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
11819 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
11820 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
11823 *) Support for RAW extensions where an arbitrary extension can be
11824 created by including its DER encoding. See apps/openssl.cnf for
11828 *) Make sure latest Perl versions don't interpret some generated C array
11829 code as Perl array code in the crypto/err/err_genc.pl script.
11830 [Lars Weber <3weber@informatik.uni-hamburg.de>]
11832 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
11833 not many people have the assembler. Various Win32 compilation fixes and
11834 update to the INSTALL.W32 file with (hopefully) more accurate Win32
11835 build instructions.
11838 *) Modify configure script 'Configure' to automatically create crypto/date.h
11839 file under Win32 and also build pem.h from pem.org. New script
11840 util/mkfiles.pl to create the MINFO file on environments that can't do a
11841 'make files': perl util/mkfiles.pl >MINFO should work.
11844 *) Major rework of DES function declarations, in the pursuit of correctness
11845 and purity. As a result, many evil casts evaporated, and some weirdness,
11846 too. You may find this causes warnings in your code. Zapping your evil
11847 casts will probably fix them. Mostly.
11850 *) Fix for a typo in asn1.h. Bug fix to object creation script
11851 obj_dat.pl. It considered a zero in an object definition to mean
11852 "end of object": none of the objects in objects.h have any zeros
11853 so it wasn't spotted.
11854 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
11856 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
11857 Masking (CBCM). In the absence of test vectors, the best I have been able
11858 to do is check that the decrypt undoes the encrypt, so far. Send me test
11859 vectors if you have them.
11862 *) Correct calculation of key length for export ciphers (too much space was
11863 allocated for null ciphers). This has not been tested!
11866 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
11867 message is now correct (it understands "crypto" and "ssl" on its
11868 command line). There is also now an "update" option. This will update
11869 the util/ssleay.num and util/libeay.num files with any new functions.
11871 perl util/mkdef.pl crypto ssl update
11872 it will update them.
11875 *) Overhauled the Perl interface (perl/*):
11876 - ported BN stuff to OpenSSL's different BN library
11877 - made the perl/ source tree CVS-aware
11878 - renamed the package from SSLeay to OpenSSL (the files still contain
11879 their history because I've copied them in the repository)
11880 - removed obsolete files (the test scripts will be replaced
11881 by better Test::Harness variants in the future)
11882 [Ralf S. Engelschall]
11884 *) First cut for a very conservative source tree cleanup:
11885 1. merge various obsolete readme texts into doc/ssleay.txt
11886 where we collect the old documents and readme texts.
11887 2. remove the first part of files where I'm already sure that we no
11888 longer need them because of three reasons: either they are just temporary
11889 files which were left by Eric or they are preserved original files where
11890 I've verified that the diff is also available in the CVS via "cvs diff
11891 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
11892 the crypto/md/ stuff).
11893 [Ralf S. Engelschall]
11895 *) More extension code. Incomplete support for subject and issuer alt
11896 name, issuer and authority key id. Change the i2v function parameters
11897 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
11898 what that's for :-) Fix to ASN1 macro which messed up
11899 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
11902 *) Preliminary support for ENUMERATED type. This is largely copied from the
11906 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
11907 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11909 *) Make sure `make rehash' target really finds the `openssl' program.
11910 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11912 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
11913 like to hear about it if this slows down other processors.
11916 *) Add CygWin32 platform information to Configure script.
11917 [Alan Batie <batie@aahz.jf.intel.com>]
11919 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
11920 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
11922 *) New program nseq to manipulate netscape certificate sequences
11925 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
11929 *) Fixes to BN code. Previously the default was to define BN_RECURSION
11930 but the BN code had some problems that would cause failures when
11931 doing certificate verification and some other functions.
11932 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11934 *) Add ASN1 and PEM code to support netscape certificate sequences.
11937 *) Add ASN1 and PEM code to support netscape certificate sequences.
11940 *) Add several PKIX and private extended key usage OIDs.
11943 *) Modify the 'ca' program to handle the new extension code. Modify
11944 openssl.cnf for new extension format, add comments.
11947 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
11948 and add a sample to openssl.cnf so req -x509 now adds appropriate
11952 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
11953 error code, add initial support to X509_print() and x509 application.
11956 *) Takes a deep breath and start adding X509 V3 extension support code. Add
11957 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
11958 stuff is currently isolated and isn't even compiled yet.
11961 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
11962 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
11963 Removed the versions check from X509 routines when loading extensions:
11964 this allows certain broken certificates that don't set the version
11965 properly to be processed.
11968 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
11969 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
11970 can still be regenerated with "make depend".
11973 *) Spelling mistake in C version of CAST-128.
11974 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
11976 *) Changes to the error generation code. The perl script err-code.pl
11977 now reads in the old error codes and retains the old numbers, only
11978 adding new ones if necessary. It also only changes the .err files if new
11979 codes are added. The makefiles have been modified to only insert errors
11980 when needed (to avoid needlessly modifying header files). This is done
11981 by only inserting errors if the .err file is newer than the auto generated
11982 C file. To rebuild all the error codes from scratch (the old behaviour)
11983 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
11984 or delete all the .err files.
11987 *) CAST-128 was incorrectly implemented for short keys. The C version has
11988 been fixed, but is untested. The assembler versions are also fixed, but
11989 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
11990 to regenerate it if needed.
11991 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
11992 Hagino <itojun@kame.net>]
11994 *) File was opened incorrectly in randfile.c.
11995 [Ulf Möller <ulf@fitug.de>]
11997 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
11998 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
11999 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
12000 al: it's just almost always a UTCTime. Note this patch adds new error
12001 codes so do a "make errors" if there are problems.
12004 *) Correct Linux 1 recognition in config.
12005 [Ulf Möller <ulf@fitug.de>]
12007 *) Remove pointless MD5 hash when using DSA keys in ca.
12008 [Anonymous <nobody@replay.com>]
12010 *) Generate an error if given an empty string as a cert directory. Also
12011 generate an error if handed NULL (previously returned 0 to indicate an
12012 error, but didn't set one).
12013 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
12015 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
12018 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
12019 parameters. This was causing a warning which killed off the Win32 compile.
12022 *) Remove C++ style comments from crypto/bn/bn_local.h.
12023 [Neil Costigan <neil.costigan@celocom.com>]
12025 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
12026 based on a text string, looking up short and long names and finally
12027 "dot" format. The "dot" format stuff didn't work. Added new function
12028 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
12029 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
12030 OID is not part of the table.
12033 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
12034 X509_LOOKUP_by_alias().
12037 *) Sort openssl functions by name.
12040 *) Get the gendsa program working (hopefully) and add it to app list. Remove
12041 encryption from sample DSA keys (in case anyone is interested the password
12045 *) Make _all_ *_free functions accept a NULL pointer.
12046 [Frans Heymans <fheymans@isaserver.be>]
12048 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
12050 [Anonymous <nobody@replay.com>]
12052 *) s_server should send the CAfile as acceptable CAs, not its own cert.
12053 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
12055 *) Don't blow it for numeric -newkey arguments to apps/req.
12056 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
12058 *) Temp key "for export" tests were wrong in s3_srvr.c.
12059 [Anonymous <nobody@replay.com>]
12061 *) Add prototype for temp key callback functions
12062 SSL_CTX_set_tmp_{rsa,dh}_callback().
12065 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
12066 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
12069 *) X509_name_add_entry() freed the wrong thing after an error.
12070 [Arne Ansper <arne@ats.cyber.ee>]
12072 *) rsa_eay.c would attempt to free a NULL context.
12073 [Arne Ansper <arne@ats.cyber.ee>]
12075 *) BIO_s_socket() had a broken should_retry() on Windoze.
12076 [Arne Ansper <arne@ats.cyber.ee>]
12078 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
12079 [Arne Ansper <arne@ats.cyber.ee>]
12081 *) Make sure the already existing X509_STORE->depth variable is initialized
12082 in X509_STORE_new(), but document the fact that this variable is still
12083 unused in the certificate verification process.
12084 [Ralf S. Engelschall]
12086 *) Fix the various library and apps files to free up pkeys obtained from
12087 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
12090 *) Fix reference counting in X509_PUBKEY_get(). This makes
12091 demos/maurice/example2.c work, amongst others, probably.
12092 [Steve Henson and Ben Laurie]
12094 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
12095 `openssl' and second, the shortcut symlinks for the `openssl <command>'
12096 are no longer created. This way we have a single and consistent command
12097 line interface `openssl <command>', similar to `cvs <command>'.
12098 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
12100 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
12101 BIT STRING wrapper always have zero unused bits.
12104 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
12107 *) Make the top-level INSTALL documentation easier to understand.
12110 *) Makefiles updated to exit if an error occurs in a sub-directory
12111 make (including if user presses ^C) [Paul Sutton]
12113 *) Make Montgomery context stuff explicit in RSA data structure.
12116 *) Fix build order of pem and err to allow for generated pem.h.
12119 *) Fix renumbering bug in X509_NAME_delete_entry().
12122 *) Enhanced the err-ins.pl script so it makes the error library number
12123 global and can add a library name. This is needed for external ASN1 and
12124 other error libraries.
12127 *) Fixed sk_insert which never worked properly.
12130 *) Fix ASN1 macros so they can handle indefinite length constructed
12131 EXPLICIT tags. Some non standard certificates use these: they can now
12135 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
12136 into a single doc/ssleay.txt bundle. This way the information is still
12137 preserved but no longer messes up this directory. Now it's new room for
12138 the new set of documentation files.
12139 [Ralf S. Engelschall]
12141 *) SETs were incorrectly DER encoded. This was a major pain, because they
12142 shared code with SEQUENCEs, which aren't coded the same. This means that
12143 almost everything to do with SETs or SEQUENCEs has either changed name or
12144 number of arguments.
12145 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
12147 *) Fix test data to work with the above.
12150 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
12151 was already fixed by Eric for 0.9.1 it seems.
12152 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
12154 *) Autodetect FreeBSD3.
12157 *) Fix various bugs in Configure. This affects the following platforms:
12161 unixware-2.0-pentium
12165 *) Eliminate generated files from CVS. Reorder tests to regenerate files
12166 before they are needed.
12169 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
12173 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
12175 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
12176 changed SSLeay to OpenSSL in version strings.
12177 [Ralf S. Engelschall]
12179 *) Some fixups to the top-level documents.
12182 *) Fixed the nasty bug where rsaref.h was not found under compile-time
12183 because the symlink to include/ was missing.
12184 [Ralf S. Engelschall]
12186 *) Incorporated the popular no-RSA/DSA-only patches
12187 which allow to compile a RSA-free SSLeay.
12188 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
12190 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
12191 when "ssleay" is still not found.
12192 [Ralf S. Engelschall]
12194 *) Added more platforms to Configure: Cray T3E, HPUX 11,
12195 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
12197 *) Updated the README file.
12198 [Ralf S. Engelschall]
12200 *) Added various .cvsignore files in the CVS repository subdirs
12201 to make a "cvs update" really silent.
12202 [Ralf S. Engelschall]
12204 *) Recompiled the error-definition header files and added
12205 missing symbols to the Win32 linker tables.
12206 [Ralf S. Engelschall]
12208 *) Cleaned up the top-level documents;
12209 o new files: CHANGES and LICENSE
12210 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
12211 o merged COPYRIGHT into LICENSE
12212 o removed obsolete TODO file
12213 o renamed MICROSOFT to INSTALL.W32
12214 [Ralf S. Engelschall]
12216 *) Removed dummy files from the 0.9.1b source tree:
12217 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
12218 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
12219 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
12220 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
12221 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
12222 [Ralf S. Engelschall]
12224 *) Added various platform portability fixes.
12227 *) The Genesis of the OpenSSL rpject:
12228 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
12229 Young and Tim J. Hudson created while they were working for C2Net until
12231 [The OpenSSL Project]
12234 Changes between 0.9.0b and 0.9.1b [not released]
12236 *) Updated a few CA certificates under certs/
12239 *) Changed some BIGNUM api stuff.
12242 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
12243 DGUX x86, Linux Alpha, etc.
12246 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
12247 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
12251 *) Add -strparse option to asn1pars program which parses nested
12253 [Dr Stephen Henson <shenson@bigfoot.com>]
12255 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
12258 *) DSA fix for "ca" program.
12261 *) Added "-genkey" option to "dsaparam" program.
12264 *) Added RIPE MD160 (rmd160) message digest.
12267 *) Added -a (all) option to "ssleay version" command.
12270 *) Added PLATFORM define which is the id given to Configure.
12273 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
12276 *) Extended the ASN.1 parser routines.
12279 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
12282 *) Added a BN_CTX to the BN library.
12285 *) Fixed the weak key values in DES library
12288 *) Changed API in EVP library for cipher aliases.
12291 *) Added support for RC2/64bit cipher.
12294 *) Converted the lhash library to the crypto/mem.c functions.
12297 *) Added more recognized ASN.1 object ids.
12300 *) Added more RSA padding checks for SSL/TLS.
12303 *) Added BIO proxy/filter functionality.
12306 *) Added extra_certs to SSL_CTX which can be used
12307 send extra CA certificates to the client in the CA cert chain sending
12308 process. It can be configured with SSL_CTX_add_extra_chain_cert().
12311 *) Now Fortezza is denied in the authentication phase because
12312 this is key exchange mechanism is not supported by SSLeay at all.
12315 *) Additional PKCS1 checks.
12318 *) Support the string "TLSv1" for all TLS v1 ciphers.
12321 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
12322 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
12325 *) Fixed a few memory leaks.
12328 *) Fixed various code and comment typos.
12331 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
12332 bytes sent in the client random.
12333 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob