5 Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
7 *) Minor change to DRBG entropy callback semantics. In some cases
8 there is no mutiple of the block length between min_len and
9 max_len. Allow the callback to return more than max_len bytes
10 of entropy but discard any extra: it is the callback's responsibility
11 to ensure that the extra data discarded does not impact the
12 requested amount of entropy.
15 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
16 information in FIPS186-3, SP800-57 and SP800-131A.
19 *) CCM support via EVP. Interface is very similar to GCM case except we
20 must supply all data in one chunk (i.e. no update, final) and the
21 message length must be supplied if AAD is used. Add algorithm test
25 *) Initial version of POST overhaul. Add POST callback to allow the status
26 of POST to be monitored and/or failures induced. Modify fips_test_suite
27 to use callback. Always run all selftests even if one fails.
30 *) XTS support including algorithm test driver in the fips_gcmtest program.
31 Note: this does increase the maximum key length from 32 to 64 bytes but
32 there should be no binary compatibility issues as existing applications
33 will never use XTS mode.
36 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
37 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
38 performs algorithm blocking for unapproved PRNG types. Also do not
39 set PRNG type in FIPS_mode_set(): leave this to the application.
40 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
41 the standard OpenSSL PRNG: set additional data to a date time vector.
44 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
45 This shouldn't present any incompatibility problems because applications
46 shouldn't be using these directly and any that are will need to rethink
47 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
50 *) Extensive self tests and health checking required by SP800-90 DRBG.
51 Remove strength parameter from FIPS_drbg_instantiate and always
52 instantiate at maximum supported strength.
56 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
58 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
61 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
64 *) New function DH_compute_key_padded() to compute a DH key and pad with
65 leading zeroes if needed: this complies with SP800-56A et al.
68 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
69 anything, incomplete, subject to change and largely untested at present.
72 *) Modify fipscanisteronly build option to only build the necessary object
73 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
76 *) Add experimental option FIPSSYMS to give all symbols in
77 fipscanister.o and FIPS or fips prefix. This will avoid
78 conflicts with future versions of OpenSSL. Add perl script
79 util/fipsas.pl to preprocess assembly language source files
80 and rename any affected symbols.
83 *) Add selftest checks and algorithm block of non-fips algorithms in
84 FIPS mode. Remove DES2 from selftests.
87 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
88 return internal method without any ENGINE dependencies. Add new
89 tiny fips sign and verify functions.
92 *) New build option no-ec2m to disable characteristic 2 code.
95 *) New build option "fipscanisteronly". This only builds fipscanister.o
96 and (currently) associated fips utilities. Uses the file Makefile.fips
97 instead of Makefile.org as the prototype.
100 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
101 Update fips_gcmtest to use IV generator.
104 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
105 setting output buffer to NULL. The *Final function must be
106 called although it will not retrieve any additional data. The tag
107 can be set or retrieved with a ctrl. The IV length is by default 12
108 bytes (96 bits) but can be set to an alternative value. If the IV
109 length exceeds the maximum IV length (currently 16 bytes) it cannot be
113 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
114 underlying do_cipher function handles all cipher semantics itself
115 including padding and finalisation. This is useful if (for example)
116 an ENGINE cipher handles block padding itself. The behaviour of
117 do_cipher is subtly changed if this flag is set: the return value
118 is the number of characters written to the output buffer (zero is
119 no longer an error code) or a negative error code. Also if the
120 input buffer is NULL and length 0 finalisation should be performed.
123 *) If a candidate issuer certificate is already part of the constructed
124 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
127 *) Improve forward-security support: add functions
129 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
130 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
132 for use by SSL/TLS servers; the callback function will be called whenever a
133 new session is created, and gets to decide whether the session may be
134 cached to make it resumable (return 0) or not (return 1). (As by the
135 SSL/TLS protocol specifications, the session_id sent by the server will be
136 empty to indicate that the session is not resumable; also, the server will
137 not generate RFC 4507 (RFC 5077) session tickets.)
139 A simple reasonable callback implementation is to return is_forward_secure.
140 This parameter will be set to 1 or 0 depending on the ciphersuite selected
141 by the SSL/TLS server library, indicating whether it can provide forward
143 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
145 *) Add Next Protocol Negotiation,
146 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
147 disabled with a no-npn flag to config or Configure. Code donated
149 [Adam Langley <agl@google.com> and Ben Laurie]
151 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
152 all platforms. Move ssize_t definition from e_os.h to the public
153 header file e_os2.h as it now appears in public header file cms.h
156 *) New function OPENSSL_gmtime_diff to find the difference in days
157 and seconds between two tm structures. This will be used to provide
158 additional functionality for ASN1_TIME.
161 *) New -sigopt option to the ca, req and x509 utilities. Additional
162 signature parameters can be passed using this option and in
166 *) Add RSA PSS signing function. This will generate and set the
167 appropriate AlgorithmIdentifiers for PSS based on those in the
168 corresponding EVP_MD_CTX structure. No application support yet.
171 *) Support for companion algorithm specific ASN1 signing routines.
172 New function ASN1_item_sign_ctx() signs a pre-initialised
173 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
174 the appropriate parameters.
177 *) Add new algorithm specific ASN1 verification initialisation function
178 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
179 handling will be the same no matter what EVP_PKEY_METHOD is used.
180 Add a PSS handler to support verification of PSS signatures: checked
181 against a number of sample certificates.
184 *) Add signature printing for PSS. Add PSS OIDs.
185 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
187 *) Add algorithm specific signature printing. An individual ASN1 method
188 can now print out signatures instead of the standard hex dump.
190 More complex signatures (e.g. PSS) can print out more meaningful
191 information. Include DSA version that prints out the signature
195 *) Add -trusted_first option which attempts to find certificates in the
196 trusted store even if an untrusted chain is also supplied.
199 *) Initial experimental support for explicitly trusted non-root CAs.
200 OpenSSL still tries to build a complete chain to a root but if an
201 intermediate CA has a trust setting included that is used. The first
202 setting is used: whether to trust or reject.
205 *) New -verify_name option in command line utilities to set verification
209 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
210 Add CMAC pkey methods.
213 *) Experiemental regnegotiation in s_server -www mode. If the client
214 browses /reneg connection is renegotiated. If /renegcert it is
215 renegotiated requesting a certificate.
218 *) Add an "external" session cache for debugging purposes to s_server. This
219 should help trace issues which normally are only apparent in deployed
220 multi-process servers.
223 *) Experiemental password based recipient info support for CMS library:
224 implementing RFC3211.
227 *) Split password based encryption into PBES2 and PBKDF2 functions. This
228 neatly separates the code into cipher and PBE sections and is required
229 for some algorithms that split PBES2 into separate pieces (such as
233 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
234 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
235 BIO_set_cipher() and some obscure PEM functions were changed so they
236 can now return an error. The RAND changes required a change to the
237 RAND_METHOD structure.
240 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
241 a gcc attribute to warn if the result of a function is ignored. This
242 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
243 whose return value is often ignored.
246 Changes between 1.0.0d and 1.0.1 [xx XXX xxxx]
248 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
251 *) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
252 elliptic curve NIST-P224 with constant-time single point multiplication on
253 typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
254 (while EC_GROUP_new_curve_GFp() currently won't and prefers the more
255 flexible implementations).
257 The implementation requires support for the nonstandard type __uint128_t,
258 and so is disabled by default. To include this in your build of OpenSSL,
259 use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
260 and run "make depend" (or "make update").
261 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
263 *) Permit abbreviated handshakes when renegotiating using the function
264 SSL_renegotiate_abbreviated().
265 [Robin Seggelmann <seggelmann@fh-muenster.de>]
267 *) Add call to ENGINE_register_all_complete() to
268 ENGINE_load_builtin_engines(), so some implementations get used
269 automatically instead of needing explicit application support.
272 *) Add support for TLS key exporter as described in RFC5705.
273 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
275 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
276 a few changes are required:
278 Add SSL_OP_NO_TLSv1_1 flag.
280 Update version checking logic to handle version 1.1.
281 Add explicit IV handling (ported from DTLS code).
282 Add command line options to s_client/s_server.
285 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
287 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
288 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
290 *) Fix bug in string printing code: if *any* escaping is enabled we must
291 escape the escape character (backslash) or the resulting string is
295 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
297 *) Disable code workaround for ancient and obsolete Netscape browsers
298 and servers: an attacker can use it in a ciphersuite downgrade attack.
299 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
302 *) Fixed J-PAKE implementation error, originally discovered by
303 Sebastien Martini, further info and confirmation from Stefan
304 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
307 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
309 *) Fix extension code to avoid race conditions which can result in a buffer
310 overrun vulnerability: resumed sessions must not be modified as they can
311 be shared by multiple threads. CVE-2010-3864
314 *) Fix WIN32 build system to correctly link an ENGINE directory into
318 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
320 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
322 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
324 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
326 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
327 context. The operation can be customised via the ctrl mechanism in
328 case ENGINEs want to include additional functionality.
331 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
334 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
335 output hashes compatible with older versions of OpenSSL.
336 [Willy Weisz <weisz@vcpc.univie.ac.at>]
338 *) Fix compression algorithm handling: if resuming a session use the
339 compression algorithm of the resumed session instead of determining
340 it from client hello again. Don't allow server to change algorithm.
343 *) Add load_crls() function to apps tidying load_certs() too. Add option
344 to verify utility to allow additional CRLs to be included.
347 *) Update OCSP request code to permit adding custom headers to the request:
348 some responders need this.
351 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
353 [Julia Lawall <julia@diku.dk>]
355 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
356 needlessly dereferenced structures, used obsolete functions and
357 didn't handle all updated verify codes correctly.
360 *) Disable MD2 in the default configuration.
363 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
364 indicate the initial BIO being pushed or popped. This makes it possible
365 to determine whether the BIO is the one explicitly called or as a result
366 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
367 it handles reference counts correctly and doesn't zero out the I/O bio
368 when it is not being explicitly popped. WARNING: applications which
369 included workarounds for the old buggy behaviour will need to be modified
370 or they could free up already freed BIOs.
373 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
374 renaming to all platforms (within the 0.9.8 branch, this was
375 done conditionally on Netware platforms to avoid a name clash).
376 [Guenter <lists@gknw.net>]
378 *) Add ECDHE and PSK support to DTLS.
379 [Michael Tuexen <tuexen@fh-muenster.de>]
381 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
385 *) Add "missing" function EVP_MD_flags() (without this the only way to
386 retrieve a digest flags is by accessing the structure directly. Update
387 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
388 or cipher is registered as in the "from" argument. Print out all
389 registered digests in the dgst usage message instead of manually
390 attempting to work them out.
393 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
394 this allows the use of compression and extensions. Change default cipher
395 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
396 by default unless an application cipher string requests it.
399 *) Alter match criteria in PKCS12_parse(). It used to try to use local
400 key ids to find matching certificates and keys but some PKCS#12 files
401 don't follow the (somewhat unwritten) rules and this strategy fails.
402 Now just gather all certificates together and the first private key
403 then look for the first certificate that matches the key.
406 *) Support use of registered digest and cipher names for dgst and cipher
407 commands instead of having to add each one as a special case. So now
414 openssl dgst -sha256 foo
416 and this works for ENGINE based algorithms too.
420 *) Update Gost ENGINE to support parameter files.
421 [Victor B. Wagner <vitus@cryptocom.ru>]
423 *) Support GeneralizedTime in ca utility.
424 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
426 *) Enhance the hash format used for certificate directory links. The new
427 form uses the canonical encoding (meaning equivalent names will work
428 even if they aren't identical) and uses SHA1 instead of MD5. This form
429 is incompatible with the older format and as a result c_rehash should
430 be used to rebuild symbolic links.
433 *) Make PKCS#8 the default write format for private keys, replacing the
434 traditional format. This form is standardised, more secure and doesn't
435 include an implicit MD5 dependency.
438 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
439 committed to OpenSSL should pass this lot as a minimum.
442 *) Add session ticket override functionality for use by EAP-FAST.
443 [Jouni Malinen <j@w1.fi>]
445 *) Modify HMAC functions to return a value. Since these can be implemented
446 in an ENGINE errors can occur.
449 *) Type-checked OBJ_bsearch_ex.
452 *) Type-checked OBJ_bsearch. Also some constification necessitated
453 by type-checking. Still to come: TXT_DB, bsearch(?),
454 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
458 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
459 seconds to a tm structure directly, instead of going through OS
460 specific date routines. This avoids any issues with OS routines such
461 as the year 2038 bug. New *_adj() functions for ASN1 time structures
462 and X509_time_adj_ex() to cover the extended range. The existing
463 X509_time_adj() is still usable and will no longer have any date issues.
466 *) Delta CRL support. New use deltas option which will attempt to locate
467 and search any appropriate delta CRLs available.
469 This work was sponsored by Google.
472 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
473 code and add additional score elements. Validate alternate CRL paths
474 as part of the CRL checking and indicate a new error "CRL path validation
475 error" in this case. Applications wanting additional details can use
476 the verify callback and check the new "parent" field. If this is not
477 NULL CRL path validation is taking place. Existing applications wont
478 see this because it requires extended CRL support which is off by
481 This work was sponsored by Google.
484 *) Support for freshest CRL extension.
486 This work was sponsored by Google.
489 *) Initial indirect CRL support. Currently only supported in the CRLs
490 passed directly and not via lookup. Process certificate issuer
491 CRL entry extension and lookup CRL entries by bother issuer name
492 and serial number. Check and process CRL issuer entry in IDP extension.
494 This work was sponsored by Google.
497 *) Add support for distinct certificate and CRL paths. The CRL issuer
498 certificate is validated separately in this case. Only enabled if
499 an extended CRL support flag is set: this flag will enable additional
500 CRL functionality in future.
502 This work was sponsored by Google.
505 *) Add support for policy mappings extension.
507 This work was sponsored by Google.
510 *) Fixes to pathlength constraint, self issued certificate handling,
511 policy processing to align with RFC3280 and PKITS tests.
513 This work was sponsored by Google.
516 *) Support for name constraints certificate extension. DN, email, DNS
517 and URI types are currently supported.
519 This work was sponsored by Google.
522 *) To cater for systems that provide a pointer-based thread ID rather
523 than numeric, deprecate the current numeric thread ID mechanism and
524 replace it with a structure and associated callback type. This
525 mechanism allows a numeric "hash" to be extracted from a thread ID in
526 either case, and on platforms where pointers are larger than 'long',
527 mixing is done to help ensure the numeric 'hash' is usable even if it
528 can't be guaranteed unique. The default mechanism is to use "&errno"
529 as a pointer-based thread ID to distinguish between threads.
531 Applications that want to provide their own thread IDs should now use
532 CRYPTO_THREADID_set_callback() to register a callback that will call
533 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
535 Note that ERR_remove_state() is now deprecated, because it is tied
536 to the assumption that thread IDs are numeric. ERR_remove_state(0)
537 to free the current thread's error state should be replaced by
538 ERR_remove_thread_state(NULL).
540 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
541 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
542 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
543 application was previously providing a numeric thread callback that
544 was inappropriate for distinguishing threads, then uniqueness might
545 have been obtained with &errno that happened immediately in the
546 intermediate development versions of OpenSSL; this is no longer the
547 case, the numeric thread callback will now override the automatic use
549 [Geoff Thorpe, with help from Bodo Moeller]
551 *) Initial support for different CRL issuing certificates. This covers a
552 simple case where the self issued certificates in the chain exist and
553 the real CRL issuer is higher in the existing chain.
555 This work was sponsored by Google.
558 *) Removed effectively defunct crypto/store from the build.
561 *) Revamp of STACK to provide stronger type-checking. Still to come:
562 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
563 ASN1_STRING, CONF_VALUE.
566 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
567 RAM on SSL connections. This option can save about 34k per idle SSL.
570 *) Revamp of LHASH to provide stronger type-checking. Still to come:
571 STACK, TXT_DB, bsearch, qsort.
574 *) Initial support for Cryptographic Message Syntax (aka CMS) based
575 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
576 support for data, signedData, compressedData, digestedData and
577 encryptedData, envelopedData types included. Scripts to check against
578 RFC4134 examples draft and interop and consistency checks of many
579 content types and variants.
582 *) Add options to enc utility to support use of zlib compression BIO.
585 *) Extend mk1mf to support importing of options and assembly language
586 files from Configure script, currently only included in VC-WIN32.
587 The assembly language rules can now optionally generate the source
588 files from the associated perl scripts.
591 *) Implement remaining functionality needed to support GOST ciphersuites.
592 Interop testing has been performed using CryptoPro implementations.
593 [Victor B. Wagner <vitus@cryptocom.ru>]
595 *) s390x assembler pack.
598 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
602 *) Implement Opaque PRF Input TLS extension as specified in
603 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
604 official specification yet and no extension type assignment by
605 IANA exists, this extension (for now) will have to be explicitly
606 enabled when building OpenSSL by providing the extension number
607 to use. For example, specify an option
609 -DTLSEXT_TYPE_opaque_prf_input=0x9527
611 to the "config" or "Configure" script to enable the extension,
612 assuming extension number 0x9527 (which is a completely arbitrary
613 and unofficial assignment based on the MD5 hash of the Internet
614 Draft). Note that by doing so, you potentially lose
615 interoperability with other TLS implementations since these might
616 be using the same extension number for other purposes.
618 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
619 opaque PRF input value to use in the handshake. This will create
620 an interal copy of the length-'len' string at 'src', and will
621 return non-zero for success.
623 To get more control and flexibility, provide a callback function
626 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
627 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
631 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
634 Callback function 'cb' will be called in handshakes, and is
635 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
636 Argument 'arg' is for application purposes (the value as given to
637 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
638 be provided to the callback function). The callback function
639 has to return non-zero to report success: usually 1 to use opaque
640 PRF input just if possible, or 2 to enforce use of the opaque PRF
641 input. In the latter case, the library will abort the handshake
642 if opaque PRF input is not successfully negotiated.
644 Arguments 'peerinput' and 'len' given to the callback function
645 will always be NULL and 0 in the case of a client. A server will
646 see the client's opaque PRF input through these variables if
647 available (NULL and 0 otherwise). Note that if the server
648 provides an opaque PRF input, the length must be the same as the
649 length of the client's opaque PRF input.
651 Note that the callback function will only be called when creating
652 a new session (session resumption can resume whatever was
653 previously negotiated), and will not be called in SSL 2.0
654 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
655 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
656 for applications that need to enforce opaque PRF input.
660 *) Update ssl code to support digests other than SHA1+MD5 for handshake
663 [Victor B. Wagner <vitus@cryptocom.ru>]
665 *) Add RFC4507 support to OpenSSL. This includes the corrections in
666 RFC4507bis. The encrypted ticket format is an encrypted encoded
667 SSL_SESSION structure, that way new session features are automatically
670 If a client application caches session in an SSL_SESSION structure
671 support is transparent because tickets are now stored in the encoded
674 The SSL_CTX structure automatically generates keys for ticket
675 protection in servers so again support should be possible
676 with no application modification.
678 If a client or server wishes to disable RFC4507 support then the option
679 SSL_OP_NO_TICKET can be set.
681 Add a TLS extension debugging callback to allow the contents of any client
682 or server extensions to be examined.
684 This work was sponsored by Google.
687 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
688 OpenSSL should now compile cleanly on gcc 4.2
689 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
691 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
692 support including streaming MAC support: this is required for GOST
694 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
696 *) Add option -stream to use PKCS#7 streaming in smime utility. New
697 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
698 to output in BER and PEM format.
701 *) Experimental support for use of HMAC via EVP_PKEY interface. This
702 allows HMAC to be handled via the EVP_DigestSign*() interface. The
703 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
704 ENGINE support for HMAC keys which are unextractable. New -mac and
705 -macopt options to dgst utility.
708 *) New option -sigopt to dgst utility. Update dgst to use
709 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
710 alternative signing paramaters such as X9.31 or PSS in the dgst
714 *) Change ssl_cipher_apply_rule(), the internal function that does
715 the work each time a ciphersuite string requests enabling
716 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
717 removing ("!foo+bar") a class of ciphersuites: Now it maintains
718 the order of disabled ciphersuites such that those ciphersuites
719 that most recently went from enabled to disabled not only stay
720 in order with respect to each other, but also have higher priority
721 than other disabled ciphersuites the next time ciphersuites are
724 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
725 the same ciphersuites as with "HIGH" alone, but in a specific
726 order where the PSK ciphersuites come first (since they are the
727 most recently disabled ciphersuites when "HIGH" is parsed).
729 Also, change ssl_create_cipher_list() (using this new
730 funcionality) such that between otherwise identical
731 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
735 *) Change ssl_create_cipher_list() so that it automatically
736 arranges the ciphersuites in reasonable order before starting
737 to process the rule string. Thus, the definition for "DEFAULT"
738 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
739 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
740 This makes it much easier to arrive at a reasonable default order
741 in applications for which anonymous ciphers are OK (meaning
742 that you can't actually use DEFAULT).
743 [Bodo Moeller; suggested by Victor Duchovni]
745 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
746 processing) into multiple integers instead of setting
747 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
748 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
749 (These masks as well as the individual bit definitions are hidden
750 away into the non-exported interface ssl/ssl_locl.h, so this
751 change to the definition of the SSL_CIPHER structure shouldn't
752 affect applications.) This give us more bits for each of these
753 categories, so there is no longer a need to coagulate AES128 and
754 AES256 into a single algorithm bit, and to coagulate Camellia128
755 and Camellia256 into a single algorithm bit, which has led to all
758 Thus, among other things, the kludge introduced in 0.9.7m and
759 0.9.8e for masking out AES256 independently of AES128 or masking
760 out Camellia256 independently of AES256 is not needed here in 0.9.9.
762 With the change, we also introduce new ciphersuite aliases that
763 so far were missing: "AES128", "AES256", "CAMELLIA128", and
767 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
768 Use the leftmost N bytes of the signature input if the input is
769 larger than the prime q (with N being the size in bytes of q).
772 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
773 it yet and it is largely untested.
776 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
779 *) Initial incomplete changes to avoid need for function casts in OpenSSL
780 some compilers (gcc 4.2 and later) reject their use. Safestack is
781 reimplemented. Update ASN1 to avoid use of legacy functions.
784 *) Win32/64 targets are linked with Winsock2.
787 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
788 to external functions. This can be used to increase CRL handling
789 efficiency especially when CRLs are very large by (for example) storing
790 the CRL revoked certificates in a database.
793 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
794 new CRLs added to a directory can be used. New command line option
795 -verify_return_error to s_client and s_server. This causes real errors
796 to be returned by the verify callback instead of carrying on no matter
797 what. This reflects the way a "real world" verify callback would behave.
800 *) GOST engine, supporting several GOST algorithms and public key formats.
801 Kindly donated by Cryptocom.
804 *) Partial support for Issuing Distribution Point CRL extension. CRLs
805 partitioned by DP are handled but no indirect CRL or reason partitioning
806 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
807 selected via a scoring technique which handles IDP and AKID in CRLs.
810 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
811 will ultimately be used for all verify operations: this will remove the
812 X509_STORE dependency on certificate verification and allow alternative
813 lookup methods. X509_STORE based implementations of these two callbacks.
816 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
817 Modify get_crl() to find a valid (unexpired) CRL if possible.
820 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
821 this would be called X509_CRL_cmp() but that name is already used by
822 a function that just compares CRL issuer names. Cache several CRL
823 extensions in X509_CRL structure and cache CRLDP in X509.
826 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
827 this maps equivalent X509_NAME structures into a consistent structure.
828 Name comparison can then be performed rapidly using memcmp().
831 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
835 *) Allow digests to supply their own micalg string for S/MIME type using
836 the ctrl EVP_MD_CTRL_MICALG.
839 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
840 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
841 ctrl. It can then customise the structure before and/or after signing
845 *) New function OBJ_add_sigid() to allow application defined signature OIDs
846 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
847 to free up any added signature OIDs.
850 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
851 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
852 digest and cipher tables. New options added to openssl utility:
853 list-message-digest-algorithms and list-cipher-algorithms.
856 *) Change the array representation of binary polynomials: the list
857 of degrees of non-zero coefficients is now terminated with -1.
858 Previously it was terminated with 0, which was also part of the
859 value; thus, the array representation was not applicable to
860 polynomials where t^0 has coefficient zero. This change makes
861 the array representation useful in a more general context.
864 *) Various modifications and fixes to SSL/TLS cipher string
865 handling. For ECC, the code now distinguishes between fixed ECDH
866 with RSA certificates on the one hand and with ECDSA certificates
867 on the other hand, since these are separate ciphersuites. The
868 unused code for Fortezza ciphersuites has been removed.
870 For consistency with EDH, ephemeral ECDH is now called "EECDH"
871 (not "ECDHE"). For consistency with the code for DH
872 certificates, use of ECDH certificates is now considered ECDH
873 authentication, not RSA or ECDSA authentication (the latter is
874 merely the CA's signing algorithm and not actively used in the
877 The temporary ciphersuite alias "ECCdraft" is no longer
878 available, and ECC ciphersuites are no longer excluded from "ALL"
879 and "DEFAULT". The following aliases now exist for RFC 4492
880 ciphersuites, most of these by analogy with the DH case:
882 kECDHr - ECDH cert, signed with RSA
883 kECDHe - ECDH cert, signed with ECDSA
884 kECDH - ECDH cert (signed with either RSA or ECDSA)
885 kEECDH - ephemeral ECDH
886 ECDH - ECDH cert or ephemeral ECDH
892 AECDH - anonymous ECDH
893 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
897 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
898 Use correct micalg parameters depending on digest(s) in signed message.
901 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
902 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
905 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
906 an engine to register a method. Add ENGINE lookups for methods and
907 functional reference processing.
910 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
911 EVP_{Sign,Verify}* which allow an application to customise the signature
915 *) New -resign option to smime utility. This adds one or more signers
916 to an existing PKCS#7 signedData structure. Also -md option to use an
917 alternative message digest algorithm for signing.
920 *) Tidy up PKCS#7 routines and add new functions to make it easier to
921 create PKCS7 structures containing multiple signers. Update smime
922 application to support multiple signers.
925 *) New -macalg option to pkcs12 utility to allow setting of an alternative
929 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
930 Reorganize PBE internals to lookup from a static table using NIDs,
931 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
932 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
933 PRF which will be automatically used with PBES2.
936 *) Replace the algorithm specific calls to generate keys in "req" with the
940 *) Update PKCS#7 enveloped data routines to use new API. This is now
941 supported by any public key method supporting the encrypt operation. A
942 ctrl is added to allow the public key algorithm to examine or modify
943 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
947 *) Add a ctrl to asn1 method to allow a public key algorithm to express
948 a default digest type to use. In most cases this will be SHA1 but some
949 algorithms (such as GOST) need to specify an alternative digest. The
950 return value indicates how strong the prefernce is 1 means optional and
951 2 is mandatory (that is it is the only supported type). Modify
952 ASN1_item_sign() to accept a NULL digest argument to indicate it should
953 use the default md. Update openssl utilities to use the default digest
954 type for signing if it is not explicitly indicated.
957 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
958 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
959 signing method from the key type. This effectively removes the link
960 between digests and public key types.
963 *) Add an OID cross reference table and utility functions. Its purpose is to
964 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
965 rsaEncryption. This will allow some of the algorithm specific hackery
966 needed to use the correct OID to be removed.
969 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
970 structures for PKCS7_sign(). They are now set up by the relevant public
974 *) Add provisional EC pkey method with support for ECDSA and ECDH.
977 *) Add support for key derivation (agreement) in the API, DH method and
981 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
982 public and private key formats. As a side effect these add additional
983 command line functionality not previously available: DSA signatures can be
984 generated and verified using pkeyutl and DH key support and generation in
989 [Oliver Tappe <zooey@hirschkaefer.de>]
991 *) New make target "install_html_docs" installs HTML renditions of the
993 [Oliver Tappe <zooey@hirschkaefer.de>]
995 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
996 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
997 support key and parameter generation and add initial key generation
998 functionality for RSA.
1001 *) Add functions for main EVP_PKEY_method operations. The undocumented
1002 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
1003 EVP_PKEY_{encrypt,decrypt}_old.
1006 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
1007 key API, doesn't do much yet.
1010 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
1011 public key algorithms. New option to openssl utility:
1012 "list-public-key-algorithms" to print out info.
1015 *) Implement the Supported Elliptic Curves Extension for
1016 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1019 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
1020 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
1023 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
1024 utilities such as rsa, dsa, dsaparam etc except they process any key
1028 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
1029 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
1030 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
1034 *) Initial support for pluggable public key ASN1.
1035 De-spaghettify the public key ASN1 handling. Move public and private
1036 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
1037 algorithm specific handling to a single module within the relevant
1038 algorithm directory. Add functions to allow (near) opaque processing
1039 of public and private key structures.
1042 *) Implement the Supported Point Formats Extension for
1043 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1046 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
1047 for the psk identity [hint] and the psk callback functions to the
1048 SSL_SESSION, SSL and SSL_CTX structure.
1051 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
1055 SSL_CTX_use_psk_identity_hint
1056 SSL_get_psk_identity_hint
1057 SSL_get_psk_identity
1058 SSL_use_psk_identity_hint
1060 [Mika Kousa and Pasi Eronen of Nokia Corporation]
1062 *) Add RFC 3161 compliant time stamp request creation, response generation
1063 and response verification functionality.
1064 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
1066 *) Add initial support for TLS extensions, specifically for the server_name
1067 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1068 have new members for a host name. The SSL data structure has an
1069 additional member SSL_CTX *initial_ctx so that new sessions can be
1070 stored in that context to allow for session resumption, even after the
1071 SSL has been switched to a new SSL_CTX in reaction to a client's
1072 server_name extension.
1074 New functions (subject to change):
1076 SSL_get_servername()
1077 SSL_get_servername_type()
1080 New CTRL codes and macros (subject to change):
1082 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1083 - SSL_CTX_set_tlsext_servername_callback()
1084 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1085 - SSL_CTX_set_tlsext_servername_arg()
1086 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1088 openssl s_client has a new '-servername ...' option.
1090 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1091 '-key2 ...', '-servername_fatal' (subject to change). This allows
1092 testing the HostName extension for a specific single host name ('-cert'
1093 and '-key' remain fallbacks for handshakes without HostName
1094 negotiation). If the unrecogninzed_name alert has to be sent, this by
1095 default is a warning; it becomes fatal with the '-servername_fatal'
1098 [Peter Sylvester, Remy Allais, Christophe Renou]
1100 *) Whirlpool hash implementation is added.
1103 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
1104 bn(64,32). Because of instruction set limitations it doesn't have
1105 any negative impact on performance. This was done mostly in order
1106 to make it possible to share assembler modules, such as bn_mul_mont
1107 implementations, between 32- and 64-bit builds without hassle.
1110 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
1111 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
1115 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
1116 dedicated Montgomery multiplication procedure, is introduced.
1117 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
1118 "64-bit" performance on certain 32-bit targets.
1121 *) New option SSL_OP_NO_COMP to disable use of compression selectively
1122 in SSL structures. New SSL ctrl to set maximum send fragment size.
1123 Save memory by seeting the I/O buffer sizes dynamically instead of
1124 using the maximum available value.
1127 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
1128 in addition to the text details.
1131 *) Very, very preliminary EXPERIMENTAL support for printing of general
1132 ASN1 structures. This currently produces rather ugly output and doesn't
1133 handle several customised structures at all.
1136 *) Integrated support for PVK file format and some related formats such
1137 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
1138 these in the 'rsa' and 'dsa' utilities.
1141 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
1144 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
1145 place for the (very old) "NETSCAPE" format certificates which are now
1146 handled using new ASN1 code equivalents.
1149 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
1150 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
1151 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
1154 *) Modify CRL distribution points extension code to print out previously
1155 unsupported fields. Enhance extension setting code to allow setting of
1159 *) Add print and set support for Issuing Distribution Point CRL extension.
1162 *) Change 'Configure' script to enable Camellia by default.
1165 Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
1167 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
1168 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
1170 *) Fix bug in string printing code: if *any* escaping is enabled we must
1171 escape the escape character (backslash) or the resulting string is
1175 Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
1177 *) Disable code workaround for ancient and obsolete Netscape browsers
1178 and servers: an attacker can use it in a ciphersuite downgrade attack.
1179 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
1182 *) Fixed J-PAKE implementation error, originally discovered by
1183 Sebastien Martini, further info and confirmation from Stefan
1184 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
1187 Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
1189 *) Fix extension code to avoid race conditions which can result in a buffer
1190 overrun vulnerability: resumed sessions must not be modified as they can
1191 be shared by multiple threads. CVE-2010-3864
1194 *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
1197 *) Don't reencode certificate when calculating signature: cache and use
1198 the original encoding instead. This makes signature verification of
1199 some broken encodings work correctly.
1202 *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
1203 is also one of the inputs.
1204 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1206 *) Don't repeatedly append PBE algorithms to table if they already exist.
1207 Sort table on each new add. This effectively makes the table read only
1208 after all algorithms are added and subsequent calls to PKCS12_pbe_add
1212 Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
1214 [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
1217 *) Correct a typo in the CMS ASN1 module which can result in invalid memory
1218 access or freeing data twice (CVE-2010-0742)
1219 [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
1221 *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
1222 common in certificates and some applications which only call
1223 SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
1227 Reduce copying into .apps and .test in makevms.com
1228 Don't try to use blank CA certificate in CA.com
1229 Allow use of C files from original directories in maketests.com
1230 [Steven M. Schweda" <sms@antinode.info>]
1232 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
1234 *) When rejecting SSL/TLS records due to an incorrect version number, never
1235 update s->server with a new major version number. As of
1236 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
1237 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
1238 the previous behavior could result in a read attempt at NULL when
1239 receiving specific incorrect SSL/TLS records once record payload
1240 protection is active. (CVE-2010-0740)
1241 [Bodo Moeller, Adam Langley <agl@chromium.org>]
1243 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
1244 could be crashed if the relevant tables were not present (e.g. chrooted).
1245 [Tomas Hoger <thoger@redhat.com>]
1247 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
1249 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
1250 [Martin Olsson, Neel Mehta]
1252 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
1253 accommodate for stack sorting, always a write lock!).
1256 *) On some versions of WIN32 Heap32Next is very slow. This can cause
1257 excessive delays in the RAND_poll(): over a minute. As a workaround
1258 include a time check in the inner Heap32Next loop too.
1261 *) The code that handled flushing of data in SSL/TLS originally used the
1262 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
1263 the problem outlined in PR#1949. The fix suggested there however can
1264 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
1265 of Apache). So instead simplify the code to flush unconditionally.
1266 This should be fine since flushing with no data to flush is a no op.
1269 *) Handle TLS versions 2.0 and later properly and correctly use the
1270 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
1271 off ancient servers have a habit of sticking around for a while...
1274 *) Modify compression code so it frees up structures without using the
1275 ex_data callbacks. This works around a problem where some applications
1276 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
1277 restarting) then use compression (e.g. SSL with compression) later.
1278 This results in significant per-connection memory leaks and
1279 has caused some security issues including CVE-2008-1678 and
1283 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
1284 change when encrypting or decrypting.
1287 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
1288 connect and renegotiate with servers which do not support RI.
1289 Until RI is more widely deployed this option is enabled by default.
1292 *) Add "missing" ssl ctrls to clear options and mode.
1295 *) If client attempts to renegotiate and doesn't support RI respond with
1296 a no_renegotiation alert as required by RFC5746. Some renegotiating
1297 TLS clients will continue a connection gracefully when they receive
1298 the alert. Unfortunately OpenSSL mishandled this alert and would hang
1299 waiting for a server hello which it will never receive. Now we treat a
1300 received no_renegotiation alert as a fatal error. This is because
1301 applications requesting a renegotiation might well expect it to succeed
1302 and would have no code in place to handle the server denying it so the
1303 only safe thing to do is to terminate the connection.
1306 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
1307 peer supports secure renegotiation and 0 otherwise. Print out peer
1308 renegotiation support in s_client/s_server.
1311 *) Replace the highly broken and deprecated SPKAC certification method with
1312 the updated NID creation version. This should correctly handle UTF8.
1315 *) Implement RFC5746. Re-enable renegotiation but require the extension
1316 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
1317 turns out to be a bad idea. It has been replaced by
1318 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
1319 SSL_CTX_set_options(). This is really not recommended unless you
1320 know what you are doing.
1321 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
1323 *) Fixes to stateless session resumption handling. Use initial_ctx when
1324 issuing and attempting to decrypt tickets in case it has changed during
1325 servername handling. Use a non-zero length session ID when attempting
1326 stateless session resumption: this makes it possible to determine if
1327 a resumption has occurred immediately after receiving server hello
1328 (several places in OpenSSL subtly assume this) instead of later in
1332 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
1333 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
1334 fixes for a few places where the return code is not checked
1336 [Julia Lawall <julia@diku.dk>]
1338 *) Add --strict-warnings option to Configure script to include devteam
1339 warnings in other configurations.
1342 *) Add support for --libdir option and LIBDIR variable in makefiles. This
1343 makes it possible to install openssl libraries in locations which
1344 have names other than "lib", for example "/usr/lib64" which some
1346 [Steve Henson, based on patch from Jeremy Utley]
1348 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
1349 X690 8.9.12 and can produce some misleading textual output of OIDs.
1350 [Steve Henson, reported by Dan Kaminsky]
1352 *) Delete MD2 from algorithm tables. This follows the recommendation in
1353 several standards that it is not used in new applications due to
1354 several cryptographic weaknesses. For binary compatibility reasons
1355 the MD2 API is still compiled in by default.
1358 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
1362 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
1363 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
1365 [Guenter <lists@gknw.net>]
1367 *) Fix the server certificate chain building code to use X509_verify_cert(),
1368 it used to have an ad-hoc builder which was unable to cope with anything
1369 other than a simple chain.
1370 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
1372 *) Don't check self signed certificate signatures in X509_verify_cert()
1373 by default (a flag can override this): it just wastes time without
1374 adding any security. As a useful side effect self signed root CAs
1375 with non-FIPS digests are now usable in FIPS mode.
1378 *) In dtls1_process_out_of_seq_message() the check if the current message
1379 is already buffered was missing. For every new message was memory
1380 allocated, allowing an attacker to perform an denial of service attack
1381 with sending out of seq handshake messages until there is no memory
1382 left. Additionally every future messege was buffered, even if the
1383 sequence number made no sense and would be part of another handshake.
1384 So only messages with sequence numbers less than 10 in advance will be
1385 buffered. (CVE-2009-1378)
1386 [Robin Seggelmann, discovered by Daniel Mentz]
1388 *) Records are buffered if they arrive with a future epoch to be
1389 processed after finishing the corresponding handshake. There is
1390 currently no limitation to this buffer allowing an attacker to perform
1391 a DOS attack with sending records with future epochs until there is no
1392 memory left. This patch adds the pqueue_size() function to detemine
1393 the size of a buffer and limits the record buffer to 100 entries.
1395 [Robin Seggelmann, discovered by Daniel Mentz]
1397 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
1398 parent structure is freed. (CVE-2009-1379)
1401 *) Handle non-blocking I/O properly in SSL_shutdown() call.
1402 [Darryl Miles <darryl-mailinglists@netbauds.net>]
1405 [Ilya O. <vrghost@gmail.com>]
1407 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
1409 *) Disable renegotiation completely - this fixes a severe security
1410 problem (CVE-2009-3555) at the cost of breaking all
1411 renegotiation. Renegotiation can be re-enabled by setting
1412 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
1413 run-time. This is really not recommended unless you know what
1417 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
1419 *) Don't set val to NULL when freeing up structures, it is freed up by
1420 underlying code. If sizeof(void *) > sizeof(long) this can result in
1421 zeroing past the valid field. (CVE-2009-0789)
1422 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
1424 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
1425 checked correctly. This would allow some invalid signed attributes to
1426 appear to verify correctly. (CVE-2009-0591)
1427 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1429 *) Reject UniversalString and BMPString types with invalid lengths. This
1430 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
1431 a legal length. (CVE-2009-0590)
1434 *) Set S/MIME signing as the default purpose rather than setting it
1435 unconditionally. This allows applications to override it at the store
1439 *) Permit restricted recursion of ASN1 strings. This is needed in practice
1440 to handle some structures.
1443 *) Improve efficiency of mem_gets: don't search whole buffer each time
1445 [Jeremy Shapiro <jnshapir@us.ibm.com>]
1447 *) New -hex option for openssl rand.
1450 *) Print out UTF8String and NumericString when parsing ASN1.
1453 *) Support NumericString type for name components.
1456 *) Allow CC in the environment to override the automatically chosen
1457 compiler. Note that nothing is done to ensure flags work with the
1461 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
1463 *) Properly check EVP_VerifyFinal() and similar return values
1465 [Ben Laurie, Bodo Moeller, Google Security Team]
1467 *) Enable TLS extensions by default.
1470 *) Allow the CHIL engine to be loaded, whether the application is
1471 multithreaded or not. (This does not release the developer from the
1472 obligation to set up the dynamic locking callbacks.)
1473 [Sander Temme <sander@temme.net>]
1475 *) Use correct exit code if there is an error in dgst command.
1476 [Steve Henson; problem pointed out by Roland Dirlewanger]
1478 *) Tweak Configure so that you need to say "experimental-jpake" to enable
1479 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
1482 *) Add experimental JPAKE support, including demo authentication in
1483 s_client and s_server.
1486 *) Set the comparison function in v3_addr_canonize().
1487 [Rob Austein <sra@hactrn.net>]
1489 *) Add support for XMPP STARTTLS in s_client.
1490 [Philip Paeps <philip@freebsd.org>]
1492 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
1493 to ensure that even with this option, only ciphersuites in the
1494 server's preference list will be accepted. (Note that the option
1495 applies only when resuming a session, so the earlier behavior was
1496 just about the algorithm choice for symmetric cryptography.)
1499 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
1501 *) Fix NULL pointer dereference if a DTLS server received
1502 ChangeCipherSpec as first record (CVE-2009-1386).
1505 *) Fix a state transitition in s3_srvr.c and d1_srvr.c
1506 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
1509 *) The fix in 0.9.8c that supposedly got rid of unsafe
1510 double-checked locking was incomplete for RSA blinding,
1511 addressing just one layer of what turns out to have been
1512 doubly unsafe triple-checked locking.
1514 So now fix this for real by retiring the MONT_HELPER macro
1515 in crypto/rsa/rsa_eay.c.
1517 [Bodo Moeller; problem pointed out by Marius Schilder]
1519 *) Various precautionary measures:
1521 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
1523 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
1524 (NB: This would require knowledge of the secret session ticket key
1525 to exploit, in which case you'd be SOL either way.)
1527 - Change bn_nist.c so that it will properly handle input BIGNUMs
1528 outside the expected range.
1530 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
1533 [Neel Mehta, Bodo Moeller]
1535 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
1536 the load fails. Useful for distros.
1537 [Ben Laurie and the FreeBSD team]
1539 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
1542 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
1545 *) Expand ENGINE to support engine supplied SSL client certificate functions.
1547 This work was sponsored by Logica.
1550 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
1551 keystores. Support for SSL/TLS client authentication too.
1552 Not compiled unless enable-capieng specified to Configure.
1554 This work was sponsored by Logica.
1557 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
1558 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
1559 attribute creation routines such as certifcate requests and PKCS#12
1563 Changes between 0.9.8g and 0.9.8h [28 May 2008]
1565 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
1566 handshake which could lead to a cilent crash as found using the
1567 Codenomicon TLS test suite (CVE-2008-1672)
1568 [Steve Henson, Mark Cox]
1570 *) Fix double free in TLS server name extensions which could lead to
1571 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
1574 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
1576 Clear the error queue to ensure that error entries left from
1577 older function calls do not interfere with the correct operation.
1578 [Lutz Jaenicke, Erik de Castro Lopo]
1580 *) Remove root CA certificates of commercial CAs:
1582 The OpenSSL project does not recommend any specific CA and does not
1583 have any policy with respect to including or excluding any CA.
1584 Therefore it does not make any sense to ship an arbitrary selection
1585 of root CA certificates with the OpenSSL software.
1588 *) RSA OAEP patches to fix two separate invalid memory reads.
1589 The first one involves inputs when 'lzero' is greater than
1590 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
1591 before the beginning of from). The second one involves inputs where
1592 the 'db' section contains nothing but zeroes (there is a one-byte
1593 invalid read after the end of 'db').
1594 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1596 *) Partial backport from 0.9.9-dev:
1598 Introduce bn_mul_mont (dedicated Montgomery multiplication
1599 procedure) as a candidate for BIGNUM assembler implementation.
1600 While 0.9.9-dev uses assembler for various architectures, only
1601 x86_64 is available by default here in the 0.9.8 branch, and
1602 32-bit x86 is available through a compile-time setting.
1604 To try the 32-bit x86 assembler implementation, use Configure
1605 option "enable-montasm" (which exists only for this backport).
1607 As "enable-montasm" for 32-bit x86 disclaims code stability
1608 anyway, in this constellation we activate additional code
1609 backported from 0.9.9-dev for further performance improvements,
1610 namely BN_from_montgomery_word. (To enable this otherwise,
1611 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
1613 [Andy Polyakov (backport partially by Bodo Moeller)]
1615 *) Add TLS session ticket callback. This allows an application to set
1616 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
1617 values. This is useful for key rollover for example where several key
1618 sets may exist with different names.
1621 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
1622 This was broken until now in 0.9.8 releases, such that the only way
1623 a registered ENGINE could be used (assuming it initialises
1624 successfully on the host) was to explicitly set it as the default
1625 for the relevant algorithms. This is in contradiction with 0.9.7
1626 behaviour and the documentation. With this fix, when an ENGINE is
1627 registered into a given algorithm's table of implementations, the
1628 'uptodate' flag is reset so that auto-discovery will be used next
1629 time a new context for that algorithm attempts to select an
1631 [Ian Lister (tweaked by Geoff Thorpe)]
1633 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
1634 implemention in the following ways:
1636 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
1639 Lack of BER streaming support means one pass streaming processing is
1640 only supported if data is detached: setting the streaming flag is
1641 ignored for embedded content.
1643 CMS support is disabled by default and must be explicitly enabled
1644 with the enable-cms configuration option.
1647 *) Update the GMP engine glue to do direct copies between BIGNUM and
1648 mpz_t when openssl and GMP use the same limb size. Otherwise the
1649 existing "conversion via a text string export" trick is still used.
1650 [Paul Sheer <paulsheer@gmail.com>]
1652 *) Zlib compression BIO. This is a filter BIO which compressed and
1653 uncompresses any data passed through it.
1656 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
1657 RFC3394 compatible AES key wrapping.
1660 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
1661 sets string data without copying. X509_ALGOR_set0() and
1662 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
1663 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
1664 from an X509_ATTRIBUTE structure optionally checking it occurs only
1665 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
1669 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
1670 to get the expected BN_FLG_CONSTTIME behavior.
1671 [Bodo Moeller (Google)]
1675 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
1676 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
1677 - added some more tests to do_tests.pl
1678 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
1679 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
1680 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
1681 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
1682 - various changes to netware.pl to enable gcc-cross builds on Win32
1684 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
1685 - various changes to fix missing prototype warnings
1686 - fixed x86nasm.pl to create correct asm files for NASM COFF output
1687 - added AES, WHIRLPOOL and CPUID assembler code to build files
1688 - added missing AES assembler make rules to mk1mf.pl
1689 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
1690 [Guenter Knauf <eflash@gmx.net>]
1692 *) Implement certificate status request TLS extension defined in RFC3546.
1693 A client can set the appropriate parameters and receive the encoded
1694 OCSP response via a callback. A server can query the supplied parameters
1695 and set the encoded OCSP response in the callback. Add simplified examples
1696 to s_client and s_server.
1699 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
1701 *) Fix various bugs:
1702 + Binary incompatibility of ssl_ctx_st structure
1703 + DTLS interoperation with non-compliant servers
1704 + Don't call get_session_cb() without proposed session
1705 + Fix ia64 assembler code
1706 [Andy Polyakov, Steve Henson]
1708 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
1710 *) DTLS Handshake overhaul. There were longstanding issues with
1711 OpenSSL DTLS implementation, which were making it impossible for
1712 RFC 4347 compliant client to communicate with OpenSSL server.
1713 Unfortunately just fixing these incompatibilities would "cut off"
1714 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
1715 server keeps tolerating non RFC compliant syntax. The opposite is
1716 not true, 0.9.8f client can not communicate with earlier server.
1717 This update even addresses CVE-2007-4995.
1720 *) Changes to avoid need for function casts in OpenSSL: some compilers
1721 (gcc 4.2 and later) reject their use.
1722 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
1725 *) Add RFC4507 support to OpenSSL. This includes the corrections in
1726 RFC4507bis. The encrypted ticket format is an encrypted encoded
1727 SSL_SESSION structure, that way new session features are automatically
1730 If a client application caches session in an SSL_SESSION structure
1731 support is transparent because tickets are now stored in the encoded
1734 The SSL_CTX structure automatically generates keys for ticket
1735 protection in servers so again support should be possible
1736 with no application modification.
1738 If a client or server wishes to disable RFC4507 support then the option
1739 SSL_OP_NO_TICKET can be set.
1741 Add a TLS extension debugging callback to allow the contents of any client
1742 or server extensions to be examined.
1744 This work was sponsored by Google.
1747 *) Add initial support for TLS extensions, specifically for the server_name
1748 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1749 have new members for a host name. The SSL data structure has an
1750 additional member SSL_CTX *initial_ctx so that new sessions can be
1751 stored in that context to allow for session resumption, even after the
1752 SSL has been switched to a new SSL_CTX in reaction to a client's
1753 server_name extension.
1755 New functions (subject to change):
1757 SSL_get_servername()
1758 SSL_get_servername_type()
1761 New CTRL codes and macros (subject to change):
1763 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1764 - SSL_CTX_set_tlsext_servername_callback()
1765 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1766 - SSL_CTX_set_tlsext_servername_arg()
1767 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1769 openssl s_client has a new '-servername ...' option.
1771 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1772 '-key2 ...', '-servername_fatal' (subject to change). This allows
1773 testing the HostName extension for a specific single host name ('-cert'
1774 and '-key' remain fallbacks for handshakes without HostName
1775 negotiation). If the unrecogninzed_name alert has to be sent, this by
1776 default is a warning; it becomes fatal with the '-servername_fatal'
1779 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
1781 *) Add AES and SSE2 assembly language support to VC++ build.
1784 *) Mitigate attack on final subtraction in Montgomery reduction.
1787 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
1788 (which previously caused an internal error).
1791 *) Squeeze another 10% out of IGE mode when in != out.
1794 *) AES IGE mode speedup.
1795 [Dean Gaudet (Google)]
1797 *) Add the Korean symmetric 128-bit cipher SEED (see
1798 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
1799 add SEED ciphersuites from RFC 4162:
1801 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
1802 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
1803 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
1804 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
1806 To minimize changes between patchlevels in the OpenSSL 0.9.8
1807 series, SEED remains excluded from compilation unless OpenSSL
1808 is configured with 'enable-seed'.
1809 [KISA, Bodo Moeller]
1811 *) Mitigate branch prediction attacks, which can be practical if a
1812 single processor is shared, allowing a spy process to extract
1813 information. For detailed background information, see
1814 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
1815 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
1816 and Necessary Software Countermeasures"). The core of the change
1817 are new versions BN_div_no_branch() and
1818 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
1819 respectively, which are slower, but avoid the security-relevant
1820 conditional branches. These are automatically called by BN_div()
1821 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
1822 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
1823 remove a conditional branch.
1825 BN_FLG_CONSTTIME is the new name for the previous
1826 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
1827 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
1828 in the exponent causes BN_mod_exp_mont() to use the alternative
1829 implementation in BN_mod_exp_mont_consttime().) The old name
1830 remains as a deprecated alias.
1832 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
1833 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
1834 constant-time implementations for more than just exponentiation.
1835 Here too the old name is kept as a deprecated alias.
1837 BN_BLINDING_new() will now use BN_dup() for the modulus so that
1838 the BN_BLINDING structure gets an independent copy of the
1839 modulus. This means that the previous "BIGNUM *m" argument to
1840 BN_BLINDING_new() and to BN_BLINDING_create_param() now
1841 essentially becomes "const BIGNUM *m", although we can't actually
1842 change this in the header file before 0.9.9. It allows
1843 RSA_setup_blinding() to use BN_with_flags() on the modulus to
1844 enable BN_FLG_CONSTTIME.
1846 [Matthew D Wood (Intel Corp)]
1848 *) In the SSL/TLS server implementation, be strict about session ID
1849 context matching (which matters if an application uses a single
1850 external cache for different purposes). Previously,
1851 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
1852 set. This did ensure strict client verification, but meant that,
1853 with applications using a single external cache for quite
1854 different requirements, clients could circumvent ciphersuite
1855 restrictions for a given session ID context by starting a session
1856 in a different context.
1859 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
1860 a ciphersuite string such as "DEFAULT:RSA" cannot enable
1861 authentication-only ciphersuites.
1864 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
1865 not complete and could lead to a possible single byte overflow
1866 (CVE-2007-5135) [Ben Laurie]
1868 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
1870 *) Since AES128 and AES256 (and similarly Camellia128 and
1871 Camellia256) share a single mask bit in the logic of
1872 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
1873 kludge to work properly if AES128 is available and AES256 isn't
1874 (or if Camellia128 is available and Camellia256 isn't).
1877 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
1878 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
1879 When a point or a seed is encoded in a BIT STRING, we need to
1880 prevent the removal of trailing zero bits to get the proper DER
1881 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
1882 of a NamedBitList, for which trailing 0 bits need to be removed.)
1885 *) Have SSL/TLS server implementation tolerate "mismatched" record
1886 protocol version while receiving ClientHello even if the
1887 ClientHello is fragmented. (The server can't insist on the
1888 particular protocol version it has chosen before the ServerHello
1889 message has informed the client about his choice.)
1892 *) Add RFC 3779 support.
1893 [Rob Austein for ARIN, Ben Laurie]
1895 *) Load error codes if they are not already present instead of using a
1896 static variable. This allows them to be cleanly unloaded and reloaded.
1897 Improve header file function name parsing.
1900 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
1901 or CAPABILITY handshake as required by RFCs.
1904 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
1906 *) Introduce limits to prevent malicious keys being able to
1907 cause a denial of service. (CVE-2006-2940)
1908 [Steve Henson, Bodo Moeller]
1910 *) Fix ASN.1 parsing of certain invalid structures that can result
1911 in a denial of service. (CVE-2006-2937) [Steve Henson]
1913 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
1914 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
1916 *) Fix SSL client code which could crash if connecting to a
1917 malicious SSLv2 server. (CVE-2006-4343)
1918 [Tavis Ormandy and Will Drewry, Google Security Team]
1920 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
1921 match only those. Before that, "AES256-SHA" would be interpreted
1922 as a pattern and match "AES128-SHA" too (since AES128-SHA got
1923 the same strength classification in 0.9.7h) as we currently only
1924 have a single AES bit in the ciphersuite description bitmap.
1925 That change, however, also applied to ciphersuite strings such as
1926 "RC4-MD5" that intentionally matched multiple ciphersuites --
1927 namely, SSL 2.0 ciphersuites in addition to the more common ones
1928 from SSL 3.0/TLS 1.0.
1930 So we change the selection algorithm again: Naming an explicit
1931 ciphersuite selects this one ciphersuite, and any other similar
1932 ciphersuite (same bitmap) from *other* protocol versions.
1933 Thus, "RC4-MD5" again will properly select both the SSL 2.0
1934 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
1936 Since SSL 2.0 does not have any ciphersuites for which the
1937 128/256 bit distinction would be relevant, this works for now.
1938 The proper fix will be to use different bits for AES128 and
1939 AES256, which would have avoided the problems from the beginning;
1940 however, bits are scarce, so we can only do this in a new release
1941 (not just a patchlevel) when we can change the SSL_CIPHER
1942 definition to split the single 'unsigned long mask' bitmap into
1943 multiple values to extend the available space.
1947 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
1949 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
1950 (CVE-2006-4339) [Ben Laurie and Google Security Team]
1952 *) Add AES IGE and biIGE modes.
1955 *) Change the Unix randomness entropy gathering to use poll() when
1956 possible instead of select(), since the latter has some
1957 undesirable limitations.
1958 [Darryl Miles via Richard Levitte and Bodo Moeller]
1960 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
1961 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
1962 cannot be implicitly activated as part of, e.g., the "AES" alias.
1963 However, please upgrade to OpenSSL 0.9.9[-dev] for
1964 non-experimental use of the ECC ciphersuites to get TLS extension
1965 support, which is required for curve and point format negotiation
1966 to avoid potential handshake problems.
1969 *) Disable rogue ciphersuites:
1971 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
1972 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
1973 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
1975 The latter two were purportedly from
1976 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
1979 Also deactivate the remaining ciphersuites from
1980 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
1981 unofficial, and the ID has long expired.
1984 *) Fix RSA blinding Heisenbug (problems sometimes occured on
1985 dual-core machines) and other potential thread-safety issues.
1988 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
1989 versions), which is now available for royalty-free use
1990 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
1991 Also, add Camellia TLS ciphersuites from RFC 4132.
1993 To minimize changes between patchlevels in the OpenSSL 0.9.8
1994 series, Camellia remains excluded from compilation unless OpenSSL
1995 is configured with 'enable-camellia'.
1998 *) Disable the padding bug check when compression is in use. The padding
1999 bug check assumes the first packet is of even length, this is not
2000 necessarily true if compresssion is enabled and can result in false
2001 positives causing handshake failure. The actual bug test is ancient
2002 code so it is hoped that implementations will either have fixed it by
2003 now or any which still have the bug do not support compression.
2006 Changes between 0.9.8a and 0.9.8b [04 May 2006]
2008 *) When applying a cipher rule check to see if string match is an explicit
2009 cipher suite and only match that one cipher suite if it is.
2012 *) Link in manifests for VC++ if needed.
2013 [Austin Ziegler <halostatue@gmail.com>]
2015 *) Update support for ECC-based TLS ciphersuites according to
2016 draft-ietf-tls-ecc-12.txt with proposed changes (but without
2017 TLS extensions, which are supported starting with the 0.9.9
2018 branch, not in the OpenSSL 0.9.8 branch).
2021 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
2022 opaque EVP_CIPHER_CTX handling.
2025 *) Fixes and enhancements to zlib compression code. We now only use
2026 "zlib1.dll" and use the default __cdecl calling convention on Win32
2027 to conform with the standards mentioned here:
2028 http://www.zlib.net/DLL_FAQ.txt
2029 Static zlib linking now works on Windows and the new --with-zlib-include
2030 --with-zlib-lib options to Configure can be used to supply the location
2031 of the headers and library. Gracefully handle case where zlib library
2035 *) Several fixes and enhancements to the OID generation code. The old code
2036 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
2037 handle numbers larger than ULONG_MAX, truncated printing and had a
2038 non standard OBJ_obj2txt() behaviour.
2041 *) Add support for building of engines under engine/ as shared libraries
2042 under VC++ build system.
2045 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
2046 Hopefully, we will not see any false combination of paths any more.
2049 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
2051 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
2052 (part of SSL_OP_ALL). This option used to disable the
2053 countermeasure against man-in-the-middle protocol-version
2054 rollback in the SSL 2.0 server implementation, which is a bad
2055 idea. (CVE-2005-2969)
2057 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
2058 for Information Security, National Institute of Advanced Industrial
2059 Science and Technology [AIST], Japan)]
2061 *) Add two function to clear and return the verify parameter flags.
2064 *) Keep cipherlists sorted in the source instead of sorting them at
2065 runtime, thus removing the need for a lock.
2068 *) Avoid some small subgroup attacks in Diffie-Hellman.
2069 [Nick Mathewson and Ben Laurie]
2071 *) Add functions for well-known primes.
2074 *) Extended Windows CE support.
2075 [Satoshi Nakamura and Andy Polyakov]
2077 *) Initialize SSL_METHOD structures at compile time instead of during
2078 runtime, thus removing the need for a lock.
2081 *) Make PKCS7_decrypt() work even if no certificate is supplied by
2082 attempting to decrypt each encrypted key in turn. Add support to
2086 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2088 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
2091 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
2094 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
2095 key into the same file any more.
2098 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
2101 *) Add -utf8 command line and config file option to 'ca'.
2102 [Stefan <stf@udoma.org]
2104 *) Removed the macro des_crypt(), as it seems to conflict with some
2105 libraries. Use DES_crypt().
2108 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
2109 involves renaming the source and generated shared-libs for
2110 both. The engines will accept the corrected or legacy ids
2111 ('ncipher' and '4758_cca' respectively) when binding. NB,
2112 this only applies when building 'shared'.
2113 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
2115 *) Add attribute functions to EVP_PKEY structure. Modify
2116 PKCS12_create() to recognize a CSP name attribute and
2117 use it. Make -CSP option work again in pkcs12 utility.
2120 *) Add new functionality to the bn blinding code:
2121 - automatic re-creation of the BN_BLINDING parameters after
2122 a fixed number of uses (currently 32)
2123 - add new function for parameter creation
2124 - introduce flags to control the update behaviour of the
2125 BN_BLINDING parameters
2126 - hide BN_BLINDING structure
2127 Add a second BN_BLINDING slot to the RSA structure to improve
2128 performance when a single RSA object is shared among several
2132 *) Add support for DTLS.
2133 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
2135 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
2136 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
2139 *) Remove buggy and incompletet DH cert support from
2140 ssl/ssl_rsa.c and ssl/s3_both.c
2143 *) Use SHA-1 instead of MD5 as the default digest algorithm for
2144 the apps/openssl applications.
2147 *) Compile clean with "-Wall -Wmissing-prototypes
2148 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
2149 DEBUG_SAFESTACK must also be set.
2152 *) Change ./Configure so that certain algorithms can be disabled by default.
2153 The new counterpiece to "no-xxx" is "enable-xxx".
2155 The patented RC5 and MDC2 algorithms will now be disabled unless
2156 "enable-rc5" and "enable-mdc2", respectively, are specified.
2158 (IDEA remains enabled despite being patented. This is because IDEA
2159 is frequently required for interoperability, and there is no license
2160 fee for non-commercial use. As before, "no-idea" can be used to
2161 avoid this algorithm.)
2165 *) Add processing of proxy certificates (see RFC 3820). This work was
2166 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
2167 EGEE (Enabling Grids for E-science in Europe).
2170 *) RC4 performance overhaul on modern architectures/implementations, such
2171 as Intel P4, IA-64 and AMD64.
2174 *) New utility extract-section.pl. This can be used specify an alternative
2175 section number in a pod file instead of having to treat each file as
2176 a separate case in Makefile. This can be done by adding two lines to the
2179 =for comment openssl_section:XXX
2181 The blank line is mandatory.
2185 *) New arguments -certform, -keyform and -pass for s_client and s_server
2186 to allow alternative format key and certificate files and passphrase
2190 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
2191 update associated structures and add various utility functions.
2193 Add new policy related verify parameters, include policy checking in
2194 standard verify code. Enhance 'smime' application with extra parameters
2195 to support policy checking and print out.
2198 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
2199 Nehemiah processors. These extensions support AES encryption in hardware
2200 as well as RNG (though RNG support is currently disabled).
2201 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
2203 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
2206 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
2207 [Andy Polyakov and a number of other people]
2209 *) Improved PowerPC platform support. Most notably BIGNUM assembler
2210 implementation contributed by IBM.
2211 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
2213 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
2214 exponent rather than 'unsigned long'. There is a corresponding change to
2215 the new 'rsa_keygen' element of the RSA_METHOD structure.
2216 [Jelte Jansen, Geoff Thorpe]
2218 *) Functionality for creating the initial serial number file is now
2219 moved from CA.pl to the 'ca' utility with a new option -create_serial.
2221 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
2222 number file to 1, which is bound to cause problems. To avoid
2223 the problems while respecting compatibility between different 0.9.7
2224 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
2225 CA.pl for serial number initialization. With the new release 0.9.8,
2226 we can fix the problem directly in the 'ca' utility.)
2229 *) Reduced header interdepencies by declaring more opaque objects in
2230 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
2231 give fewer recursive includes, which could break lazy source code - so
2232 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
2233 developers should define this symbol when building and using openssl to
2234 ensure they track the recommended behaviour, interfaces, [etc], but
2235 backwards-compatible behaviour prevails when this isn't defined.
2238 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
2241 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
2242 This will generate a random key of the appropriate length based on the
2243 cipher context. The EVP_CIPHER can provide its own random key generation
2244 routine to support keys of a specific form. This is used in the des and
2245 3des routines to generate a key of the correct parity. Update S/MIME
2246 code to use new functions and hence generate correct parity DES keys.
2247 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
2248 valid (weak or incorrect parity).
2251 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
2252 as looking them up. This is useful when the verified structure may contain
2253 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
2254 present unless the new PKCS7_NO_CRL flag is asserted.
2257 *) Extend ASN1 oid configuration module. It now additionally accepts the
2260 shortName = some long name, 1.2.3.4
2263 *) Reimplemented the BN_CTX implementation. There is now no more static
2264 limitation on the number of variables it can handle nor the depth of the
2265 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
2266 information can now expand as required, and rather than having a single
2267 static array of bignums, BN_CTX now uses a linked-list of such arrays
2268 allowing it to expand on demand whilst maintaining the usefulness of
2269 BN_CTX's "bundling".
2272 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
2273 to allow all RSA operations to function using a single BN_CTX.
2276 *) Preliminary support for certificate policy evaluation and checking. This
2277 is initially intended to pass the tests outlined in "Conformance Testing
2278 of Relying Party Client Certificate Path Processing Logic" v1.07.
2281 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
2282 remained unused and not that useful. A variety of other little bignum
2283 tweaks and fixes have also been made continuing on from the audit (see
2287 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
2288 associated ASN1, EVP and SSL functions and old ASN1 macros.
2291 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
2292 and this should never fail. So the return value from the use of
2293 BN_set_word() (which can fail due to needless expansion) is now deprecated;
2294 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
2297 *) BN_CTX_get() should return zero-valued bignums, providing the same
2298 initialised value as BN_new().
2299 [Geoff Thorpe, suggested by Ulf Möller]
2301 *) Support for inhibitAnyPolicy certificate extension.
2304 *) An audit of the BIGNUM code is underway, for which debugging code is
2305 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
2306 is considered valid when processing BIGNUMs, and causes execution to
2307 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
2308 further steps are taken to deliberately pollute unused data in BIGNUM
2309 structures to try and expose faulty code further on. For now, openssl will
2310 (in its default mode of operation) continue to tolerate the inconsistent
2311 forms that it has tolerated in the past, but authors and packagers should
2312 consider trying openssl and their own applications when compiled with
2313 these debugging symbols defined. It will help highlight potential bugs in
2314 their own code, and will improve the test coverage for OpenSSL itself. At
2315 some point, these tighter rules will become openssl's default to improve
2316 maintainability, though the assert()s and other overheads will remain only
2317 in debugging configurations. See bn.h for more details.
2318 [Geoff Thorpe, Nils Larsch, Ulf Möller]
2320 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
2321 that can only be obtained through BN_CTX_new() (which implicitly
2322 initialises it). The presence of this function only made it possible
2323 to overwrite an existing structure (and cause memory leaks).
2326 *) Because of the callback-based approach for implementing LHASH as a
2327 template type, lh_insert() adds opaque objects to hash-tables and
2328 lh_doall() or lh_doall_arg() are typically used with a destructor callback
2329 to clean up those corresponding objects before destroying the hash table
2330 (and losing the object pointers). So some over-zealous constifications in
2331 LHASH have been relaxed so that lh_insert() does not take (nor store) the
2332 objects as "const" and the lh_doall[_arg] callback wrappers are not
2333 prototyped to have "const" restrictions on the object pointers they are
2334 given (and so aren't required to cast them away any more).
2337 *) The tmdiff.h API was so ugly and minimal that our own timing utility
2338 (speed) prefers to use its own implementation. The two implementations
2339 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
2340 its object type properly exposed (MS_TM) instead of casting to/from "char
2341 *". This may still change yet if someone realises MS_TM and "ms_time_***"
2342 aren't necessarily the greatest nomenclatures - but this is what was used
2343 internally to the implementation so I've used that for now.
2346 *) Ensure that deprecated functions do not get compiled when
2347 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
2348 the self-tests were still using deprecated key-generation functions so
2349 these have been updated also.
2352 *) Reorganise PKCS#7 code to separate the digest location functionality
2353 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
2354 New function PKCS7_set_digest() to set the digest type for PKCS#7
2355 digestedData type. Add additional code to correctly generate the
2356 digestedData type and add support for this type in PKCS7 initialization
2360 *) New function PKCS7_set0_type_other() this initializes a PKCS7
2361 structure of type "other".
2364 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
2365 sure the loop does correctly stop and breaking ("division by zero")
2366 modulus operations are not performed. The (pre-generated) prime
2367 table crypto/bn/bn_prime.h was already correct, but it could not be
2368 re-generated on some platforms because of the "division by zero"
2369 situation in the script.
2370 [Ralf S. Engelschall]
2372 *) Update support for ECC-based TLS ciphersuites according to
2373 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
2374 SHA-1 now is only used for "small" curves (where the
2375 representation of a field element takes up to 24 bytes); for
2376 larger curves, the field element resulting from ECDH is directly
2377 used as premaster secret.
2378 [Douglas Stebila (Sun Microsystems Laboratories)]
2380 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
2381 curve secp160r1 to the tests.
2382 [Douglas Stebila (Sun Microsystems Laboratories)]
2384 *) Add the possibility to load symbols globally with DSO.
2385 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
2387 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
2388 control of the error stack.
2391 *) Add support for STORE in ENGINE.
2394 *) Add the STORE type. The intention is to provide a common interface
2395 to certificate and key stores, be they simple file-based stores, or
2396 HSM-type store, or LDAP stores, or...
2397 NOTE: The code is currently UNTESTED and isn't really used anywhere.
2400 *) Add a generic structure called OPENSSL_ITEM. This can be used to
2401 pass a list of arguments to any function as well as provide a way
2402 for a function to pass data back to the caller.
2405 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
2406 works like BUF_strdup() but can be used to duplicate a portion of
2407 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
2411 *) Add the function sk_find_ex() which works like sk_find(), but will
2412 return an index to an element even if an exact match couldn't be
2413 found. The index is guaranteed to point at the element where the
2414 searched-for key would be inserted to preserve sorting order.
2417 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
2418 takes an extra flags argument for optional functionality. Currently,
2419 the following flags are defined:
2421 OBJ_BSEARCH_VALUE_ON_NOMATCH
2422 This one gets OBJ_bsearch_ex() to return a pointer to the first
2423 element where the comparing function returns a negative or zero
2426 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
2427 This one gets OBJ_bsearch_ex() to return a pointer to the first
2428 element where the comparing function returns zero. This is useful
2429 if there are more than one element where the comparing function
2433 *) Make it possible to create self-signed certificates with 'openssl ca'
2434 in such a way that the self-signed certificate becomes part of the
2435 CA database and uses the same mechanisms for serial number generation
2436 as all other certificate signing. The new flag '-selfsign' enables
2437 this functionality. Adapt CA.sh and CA.pl.in.
2440 *) Add functionality to check the public key of a certificate request
2441 against a given private. This is useful to check that a certificate
2442 request can be signed by that key (self-signing).
2445 *) Make it possible to have multiple active certificates with the same
2446 subject in the CA index file. This is done only if the keyword
2447 'unique_subject' is set to 'no' in the main CA section (default
2448 if 'CA_default') of the configuration file. The value is saved
2449 with the database itself in a separate index attribute file,
2450 named like the index file with '.attr' appended to the name.
2453 *) Generate muti valued AVAs using '+' notation in config files for
2457 *) Support for nameConstraints certificate extension.
2460 *) Support for policyConstraints certificate extension.
2463 *) Support for policyMappings certificate extension.
2466 *) Make sure the default DSA_METHOD implementation only uses its
2467 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
2468 and change its own handlers to be NULL so as to remove unnecessary
2469 indirection. This lets alternative implementations fallback to the
2470 default implementation more easily.
2473 *) Support for directoryName in GeneralName related extensions
2477 *) Make it possible to link applications using Makefile.shared.
2478 Make that possible even when linking against static libraries!
2481 *) Support for single pass processing for S/MIME signing. This now
2482 means that S/MIME signing can be done from a pipe, in addition
2483 cleartext signing (multipart/signed type) is effectively streaming
2484 and the signed data does not need to be all held in memory.
2486 This is done with a new flag PKCS7_STREAM. When this flag is set
2487 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
2488 is done after the data is output (and digests calculated) in
2489 SMIME_write_PKCS7().
2492 *) Add full support for -rpath/-R, both in shared libraries and
2493 applications, at least on the platforms where it's known how
2497 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
2498 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
2499 will now compute a table of multiples of the generator that
2500 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
2501 faster (notably in the case of a single point multiplication,
2502 scalar * generator).
2503 [Nils Larsch, Bodo Moeller]
2505 *) IPv6 support for certificate extensions. The various extensions
2506 which use the IP:a.b.c.d can now take IPv6 addresses using the
2507 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
2511 *) Added an ENGINE that implements RSA by performing private key
2512 exponentiations with the GMP library. The conversions to and from
2513 GMP's mpz_t format aren't optimised nor are any montgomery forms
2514 cached, and on x86 it appears OpenSSL's own performance has caught up.
2515 However there are likely to be other architectures where GMP could
2516 provide a boost. This ENGINE is not built in by default, but it can be
2517 specified at Configure time and should be accompanied by the necessary
2518 linker additions, eg;
2519 ./config -DOPENSSL_USE_GMP -lgmp
2522 *) "openssl engine" will not display ENGINE/DSO load failure errors when
2523 testing availability of engines with "-t" - the old behaviour is
2524 produced by increasing the feature's verbosity with "-tt".
2527 *) ECDSA routines: under certain error conditions uninitialized BN objects
2528 could be freed. Solution: make sure initialization is performed early
2529 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
2533 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
2534 and DH_METHOD (eg. by ENGINE implementations) to override the normal
2535 software implementations. For DSA and DH, parameter generation can
2536 also be overriden by providing the appropriate method callbacks.
2539 *) Change the "progress" mechanism used in key-generation and
2540 primality testing to functions that take a new BN_GENCB pointer in
2541 place of callback/argument pairs. The new API functions have "_ex"
2542 postfixes and the older functions are reimplemented as wrappers for
2543 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
2544 declarations of the old functions to help (graceful) attempts to
2545 migrate to the new functions. Also, the new key-generation API
2546 functions operate on a caller-supplied key-structure and return
2547 success/failure rather than returning a key or NULL - this is to
2548 help make "keygen" another member function of RSA_METHOD etc.
2550 Example for using the new callback interface:
2552 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
2556 BN_GENCB_set(&my_cb, my_callback, my_arg);
2558 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
2559 /* For the meaning of a, b in calls to my_callback(), see the
2560 * documentation of the function that calls the callback.
2561 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
2562 * my_callback should return 1 if it wants BN_is_prime_ex()
2563 * to continue, or 0 to stop.
2568 *) Change the ZLIB compression method to be stateful, and make it
2569 available to TLS with the number defined in
2570 draft-ietf-tls-compression-04.txt.
2573 *) Add the ASN.1 structures and functions for CertificatePair, which
2574 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
2576 CertificatePair ::= SEQUENCE {
2577 forward [0] Certificate OPTIONAL,
2578 reverse [1] Certificate OPTIONAL,
2579 -- at least one of the pair shall be present -- }
2581 Also implement the PEM functions to read and write certificate
2582 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
2584 This needed to be defined, mostly for the sake of the LDAP
2585 attribute crossCertificatePair, but may prove useful elsewhere as
2589 *) Make it possible to inhibit symlinking of shared libraries in
2590 Makefile.shared, for Cygwin's sake.
2593 *) Extend the BIGNUM API by creating a function
2594 void BN_set_negative(BIGNUM *a, int neg);
2595 and a macro that behave like
2596 int BN_is_negative(const BIGNUM *a);
2598 to avoid the need to access 'a->neg' directly in applications.
2601 *) Implement fast modular reduction for pseudo-Mersenne primes
2602 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
2603 EC_GROUP_new_curve_GFp() will now automatically use this
2605 [Nils Larsch <nla@trustcenter.de>]
2607 *) Add new lock type (CRYPTO_LOCK_BN).
2610 *) Change the ENGINE framework to automatically load engines
2611 dynamically from specific directories unless they could be
2612 found to already be built in or loaded. Move all the
2613 current engines except for the cryptodev one to a new
2615 The engines in engines/ are built as shared libraries if
2616 the "shared" options was given to ./Configure or ./config.
2617 Otherwise, they are inserted in libcrypto.a.
2618 /usr/local/ssl/engines is the default directory for dynamic
2619 engines, but that can be overriden at configure time through
2620 the usual use of --prefix and/or --openssldir, and at run
2621 time with the environment variable OPENSSL_ENGINES.
2622 [Geoff Thorpe and Richard Levitte]
2624 *) Add Makefile.shared, a helper makefile to build shared
2625 libraries. Addapt Makefile.org.
2628 *) Add version info to Win32 DLLs.
2629 [Peter 'Luna' Runestig" <peter@runestig.com>]
2631 *) Add new 'medium level' PKCS#12 API. Certificates and keys
2632 can be added using this API to created arbitrary PKCS#12
2633 files while avoiding the low level API.
2635 New options to PKCS12_create(), key or cert can be NULL and
2636 will then be omitted from the output file. The encryption
2637 algorithm NIDs can be set to -1 for no encryption, the mac
2638 iteration count can be set to 0 to omit the mac.
2640 Enhance pkcs12 utility by making the -nokeys and -nocerts
2641 options work when creating a PKCS#12 file. New option -nomac
2642 to omit the mac, NONE can be set for an encryption algorithm.
2643 New code is modified to use the enhanced PKCS12_create()
2644 instead of the low level API.
2647 *) Extend ASN1 encoder to support indefinite length constructed
2648 encoding. This can output sequences tags and octet strings in
2649 this form. Modify pk7_asn1.c to support indefinite length
2650 encoding. This is experimental and needs additional code to
2651 be useful, such as an ASN1 bio and some enhanced streaming
2654 Extend template encode functionality so that tagging is passed
2655 down to the template encoder.
2658 *) Let 'openssl req' fail if an argument to '-newkey' is not
2659 recognized instead of using RSA as a default.
2662 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
2663 As these are not official, they are not included in "ALL";
2664 the "ECCdraft" ciphersuite group alias can be used to select them.
2665 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
2667 *) Add ECDH engine support.
2668 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
2670 *) Add ECDH in new directory crypto/ecdh/.
2671 [Douglas Stebila (Sun Microsystems Laboratories)]
2673 *) Let BN_rand_range() abort with an error after 100 iterations
2674 without success (which indicates a broken PRNG).
2677 *) Change BN_mod_sqrt() so that it verifies that the input value
2678 is really the square of the return value. (Previously,
2679 BN_mod_sqrt would show GIGO behaviour.)
2682 *) Add named elliptic curves over binary fields from X9.62, SECG,
2683 and WAP/WTLS; add OIDs that were still missing.
2685 [Sheueling Chang Shantz and Douglas Stebila
2686 (Sun Microsystems Laboratories)]
2688 *) Extend the EC library for elliptic curves over binary fields
2689 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
2692 EC_GF2m_simple_method
2696 EC_GROUP_new_curve_GF2m
2697 EC_GROUP_set_curve_GF2m
2698 EC_GROUP_get_curve_GF2m
2699 EC_POINT_set_affine_coordinates_GF2m
2700 EC_POINT_get_affine_coordinates_GF2m
2701 EC_POINT_set_compressed_coordinates_GF2m
2703 Point compression for binary fields is disabled by default for
2704 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
2707 As binary polynomials are represented as BIGNUMs, various members
2708 of the EC_GROUP and EC_POINT data structures can be shared
2709 between the implementations for prime fields and binary fields;
2710 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
2711 are essentially identical to their ..._GFp counterparts.
2712 (For simplicity, the '..._GFp' prefix has been dropped from
2713 various internal method names.)
2715 An internal 'field_div' method (similar to 'field_mul' and
2716 'field_sqr') has been added; this is used only for binary fields.
2718 [Sheueling Chang Shantz and Douglas Stebila
2719 (Sun Microsystems Laboratories)]
2721 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
2722 through methods ('mul', 'precompute_mult').
2724 The generic implementations (now internally called 'ec_wNAF_mul'
2725 and 'ec_wNAF_precomputed_mult') remain the default if these
2726 methods are undefined.
2728 [Sheueling Chang Shantz and Douglas Stebila
2729 (Sun Microsystems Laboratories)]
2731 *) New function EC_GROUP_get_degree, which is defined through
2732 EC_METHOD. For curves over prime fields, this returns the bit
2733 length of the modulus.
2735 [Sheueling Chang Shantz and Douglas Stebila
2736 (Sun Microsystems Laboratories)]
2738 *) New functions EC_GROUP_dup, EC_POINT_dup.
2739 (These simply call ..._new and ..._copy).
2741 [Sheueling Chang Shantz and Douglas Stebila
2742 (Sun Microsystems Laboratories)]
2744 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
2745 Polynomials are represented as BIGNUMs (where the sign bit is not
2746 used) in the following functions [macros]:
2749 BN_GF2m_sub [= BN_GF2m_add]
2750 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
2751 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
2752 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
2754 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
2755 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
2756 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
2757 BN_GF2m_cmp [= BN_ucmp]
2759 (Note that only the 'mod' functions are actually for fields GF(2^m).
2760 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
2762 For some functions, an the irreducible polynomial defining a
2763 field can be given as an 'unsigned int[]' with strictly
2764 decreasing elements giving the indices of those bits that are set;
2765 i.e., p[] represents the polynomial
2766 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
2768 p[0] > p[1] > ... > p[k] = 0.
2769 This applies to the following functions:
2774 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
2775 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
2777 BN_GF2m_mod_sqrt_arr
2778 BN_GF2m_mod_solve_quad_arr
2782 Conversion can be performed by the following functions:
2787 bntest.c has additional tests for binary polynomial arithmetic.
2789 Two implementations for BN_GF2m_mod_div() are available.
2790 The default algorithm simply uses BN_GF2m_mod_inv() and
2791 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
2792 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
2793 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
2795 [Sheueling Chang Shantz and Douglas Stebila
2796 (Sun Microsystems Laboratories)]
2798 *) Add new error code 'ERR_R_DISABLED' that can be used when some
2799 functionality is disabled at compile-time.
2800 [Douglas Stebila <douglas.stebila@sun.com>]
2802 *) Change default behaviour of 'openssl asn1parse' so that more
2803 information is visible when viewing, e.g., a certificate:
2805 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
2806 mode the content of non-printable OCTET STRINGs is output in a
2807 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
2808 avoid the appearance of a printable string.
2809 [Nils Larsch <nla@trustcenter.de>]
2811 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
2813 EC_GROUP_set_asn1_flag()
2814 EC_GROUP_get_asn1_flag()
2815 EC_GROUP_set_point_conversion_form()
2816 EC_GROUP_get_point_conversion_form()
2817 These control ASN1 encoding details:
2818 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
2819 has been set to OPENSSL_EC_NAMED_CURVE.
2820 - Points are encoded in uncompressed form by default; options for
2821 asn1_for are as for point2oct, namely
2822 POINT_CONVERSION_COMPRESSED
2823 POINT_CONVERSION_UNCOMPRESSED
2824 POINT_CONVERSION_HYBRID
2826 Also add 'seed' and 'seed_len' members to EC_GROUP with access
2829 EC_GROUP_get0_seed()
2830 EC_GROUP_get_seed_len()
2831 This is used only for ASN1 purposes (so far).
2832 [Nils Larsch <nla@trustcenter.de>]
2834 *) Add 'field_type' member to EC_METHOD, which holds the NID
2835 of the appropriate field type OID. The new function
2836 EC_METHOD_get_field_type() returns this value.
2837 [Nils Larsch <nla@trustcenter.de>]
2842 EC_POINT_point2hex()
2843 EC_POINT_hex2point()
2844 providing useful interfaces to EC_POINT_point2oct() and
2845 EC_POINT_oct2point().
2846 [Nils Larsch <nla@trustcenter.de>]
2848 *) Change internals of the EC library so that the functions
2849 EC_GROUP_set_generator()
2850 EC_GROUP_get_generator()
2851 EC_GROUP_get_order()
2852 EC_GROUP_get_cofactor()
2853 are implemented directly in crypto/ec/ec_lib.c and not dispatched
2854 to methods, which would lead to unnecessary code duplication when
2855 adding different types of curves.
2856 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
2858 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
2859 arithmetic, and such that modified wNAFs are generated
2860 (which avoid length expansion in many cases).
2863 *) Add a function EC_GROUP_check_discriminant() (defined via
2864 EC_METHOD) that verifies that the curve discriminant is non-zero.
2866 Add a function EC_GROUP_check() that makes some sanity tests
2867 on a EC_GROUP, its generator and order. This includes
2868 EC_GROUP_check_discriminant().
2869 [Nils Larsch <nla@trustcenter.de>]
2871 *) Add ECDSA in new directory crypto/ecdsa/.
2873 Add applications 'openssl ecparam' and 'openssl ecdsa'
2874 (these are based on 'openssl dsaparam' and 'openssl dsa').
2876 ECDSA support is also included in various other files across the
2877 library. Most notably,
2878 - 'openssl req' now has a '-newkey ecdsa:file' option;
2879 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
2880 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
2881 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
2882 them suitable for ECDSA where domain parameters must be
2883 extracted before the specific public key;
2884 - ECDSA engine support has been added.
2885 [Nils Larsch <nla@trustcenter.de>]
2887 *) Include some named elliptic curves, and add OIDs from X9.62,
2888 SECG, and WAP/WTLS. Each curve can be obtained from the new
2890 EC_GROUP_new_by_curve_name(),
2891 and the list of available named curves can be obtained with
2892 EC_get_builtin_curves().
2893 Also add a 'curve_name' member to EC_GROUP objects, which can be
2895 EC_GROUP_set_curve_name()
2896 EC_GROUP_get_curve_name()
2897 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
2899 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
2900 was actually never needed) and in BN_mul(). The removal in BN_mul()
2901 required a small change in bn_mul_part_recursive() and the addition
2902 of the functions bn_cmp_part_words(), bn_sub_part_words() and
2903 bn_add_part_words(), which do the same thing as bn_cmp_words(),
2904 bn_sub_words() and bn_add_words() except they take arrays with
2908 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
2910 *) Cleanse PEM buffers before freeing them since they may contain
2912 [Benjamin Bennett <ben@psc.edu>]
2914 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
2915 a ciphersuite string such as "DEFAULT:RSA" cannot enable
2916 authentication-only ciphersuites.
2919 *) Since AES128 and AES256 share a single mask bit in the logic of
2920 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
2921 kludge to work properly if AES128 is available and AES256 isn't.
2924 *) Expand security boundary to match 1.1.1 module.
2927 *) Remove redundant features: hash file source, editing of test vectors
2928 modify fipsld to use external fips_premain.c signature.
2931 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
2932 run algorithm test programs.
2935 *) Make algorithm test programs more tolerant of whitespace.
2938 *) Have SSL/TLS server implementation tolerate "mismatched" record
2939 protocol version while receiving ClientHello even if the
2940 ClientHello is fragmented. (The server can't insist on the
2941 particular protocol version it has chosen before the ServerHello
2942 message has informed the client about his choice.)
2945 *) Load error codes if they are not already present instead of using a
2946 static variable. This allows them to be cleanly unloaded and reloaded.
2949 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
2951 *) Introduce limits to prevent malicious keys being able to
2952 cause a denial of service. (CVE-2006-2940)
2953 [Steve Henson, Bodo Moeller]
2955 *) Fix ASN.1 parsing of certain invalid structures that can result
2956 in a denial of service. (CVE-2006-2937) [Steve Henson]
2958 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
2959 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
2961 *) Fix SSL client code which could crash if connecting to a
2962 malicious SSLv2 server. (CVE-2006-4343)
2963 [Tavis Ormandy and Will Drewry, Google Security Team]
2965 *) Change ciphersuite string processing so that an explicit
2966 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
2967 will no longer include "AES128-SHA"), and any other similar
2968 ciphersuite (same bitmap) from *other* protocol versions (so that
2969 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
2970 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
2971 changes from 0.9.8b and 0.9.8d.
2974 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
2976 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
2977 (CVE-2006-4339) [Ben Laurie and Google Security Team]
2979 *) Change the Unix randomness entropy gathering to use poll() when
2980 possible instead of select(), since the latter has some
2981 undesirable limitations.
2982 [Darryl Miles via Richard Levitte and Bodo Moeller]
2984 *) Disable rogue ciphersuites:
2986 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
2987 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
2988 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
2990 The latter two were purportedly from
2991 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
2994 Also deactive the remaining ciphersuites from
2995 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
2996 unofficial, and the ID has long expired.
2999 *) Fix RSA blinding Heisenbug (problems sometimes occured on
3000 dual-core machines) and other potential thread-safety issues.
3003 Changes between 0.9.7i and 0.9.7j [04 May 2006]
3005 *) Adapt fipsld and the build system to link against the validated FIPS
3006 module in FIPS mode.
3009 *) Fixes for VC++ 2005 build under Windows.
3012 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
3013 from a Windows bash shell such as MSYS. It is autodetected from the
3014 "config" script when run from a VC++ environment. Modify standard VC++
3015 build to use fipscanister.o from the GNU make build.
3018 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
3020 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
3021 The value now differs depending on if you build for FIPS or not.
3022 BEWARE! A program linked with a shared FIPSed libcrypto can't be
3023 safely run with a non-FIPSed libcrypto, as it may crash because of
3024 the difference induced by this change.
3027 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
3029 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
3030 (part of SSL_OP_ALL). This option used to disable the
3031 countermeasure against man-in-the-middle protocol-version
3032 rollback in the SSL 2.0 server implementation, which is a bad
3033 idea. (CVE-2005-2969)
3035 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
3036 for Information Security, National Institute of Advanced Industrial
3037 Science and Technology [AIST], Japan)]
3039 *) Minimal support for X9.31 signatures and PSS padding modes. This is
3040 mainly for FIPS compliance and not fully integrated at this stage.
3043 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
3044 the exponentiation using a fixed-length exponent. (Otherwise,
3045 the information leaked through timing could expose the secret key
3046 after many signatures; cf. Bleichenbacher's attack on DSA with
3050 *) Make a new fixed-window mod_exp implementation the default for
3051 RSA, DSA, and DH private-key operations so that the sequence of
3052 squares and multiplies and the memory access pattern are
3053 independent of the particular secret key. This will mitigate
3054 cache-timing and potential related attacks.
3056 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
3057 and this is automatically used by BN_mod_exp_mont() if the new flag
3058 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
3059 will use this BN flag for private exponents unless the flag
3060 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
3061 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
3063 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
3065 *) Change the client implementation for SSLv23_method() and
3066 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
3067 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
3068 (Previously, the SSL 2.0 backwards compatible Client Hello
3069 message format would be used even with SSL_OP_NO_SSLv2.)
3072 *) Add support for smime-type MIME parameter in S/MIME messages which some
3076 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
3077 a threadsafe manner. Modify rsa code to use new function and add calls
3078 to dsa and dh code (which had race conditions before).
3081 *) Include the fixed error library code in the C error file definitions
3082 instead of fixing them up at runtime. This keeps the error code
3083 structures constant.
3086 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
3088 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
3091 *) Fixes for newer kerberos headers. NB: the casts are needed because
3092 the 'length' field is signed on one version and unsigned on another
3093 with no (?) obvious way to tell the difference, without these VC++
3094 complains. Also the "definition" of FAR (blank) is no longer included
3095 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
3096 some needed definitions.
3099 *) Undo Cygwin change.
3102 *) Added support for proxy certificates according to RFC 3820.
3103 Because they may be a security thread to unaware applications,
3104 they must be explicitely allowed in run-time. See
3105 docs/HOWTO/proxy_certificates.txt for further information.
3108 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
3110 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
3111 server and client random values. Previously
3112 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
3113 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
3115 This change has negligible security impact because:
3117 1. Server and client random values still have 24 bytes of pseudo random
3120 2. Server and client random values are sent in the clear in the initial
3123 3. The master secret is derived using the premaster secret (48 bytes in
3124 size for static RSA ciphersuites) as well as client server and random
3127 The OpenSSL team would like to thank the UK NISCC for bringing this issue
3130 [Stephen Henson, reported by UK NISCC]
3132 *) Use Windows randomness collection on Cygwin.
3135 *) Fix hang in EGD/PRNGD query when communication socket is closed
3136 prematurely by EGD/PRNGD.
3137 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
3139 *) Prompt for pass phrases when appropriate for PKCS12 input format.
3142 *) Back-port of selected performance improvements from development
3143 branch, as well as improved support for PowerPC platforms.
3146 *) Add lots of checks for memory allocation failure, error codes to indicate
3147 failure and freeing up memory if a failure occurs.
3148 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
3150 *) Add new -passin argument to dgst.
3153 *) Perform some character comparisons of different types in X509_NAME_cmp:
3154 this is needed for some certificates that reencode DNs into UTF8Strings
3155 (in violation of RFC3280) and can't or wont issue name rollover
3159 *) Make an explicit check during certificate validation to see that
3160 the CA setting in each certificate on the chain is correct. As a
3161 side effect always do the following basic checks on extensions,
3162 not just when there's an associated purpose to the check:
3164 - if there is an unhandled critical extension (unless the user
3165 has chosen to ignore this fault)
3166 - if the path length has been exceeded (if one is set at all)
3167 - that certain extensions fit the associated purpose (if one has
3171 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
3173 *) Avoid a race condition when CRLs are checked in a multi threaded
3174 environment. This would happen due to the reordering of the revoked
3175 entries during signature checking and serial number lookup. Now the
3176 encoding is cached and the serial number sort performed under a lock.
3177 Add new STACK function sk_is_sorted().
3180 *) Add Delta CRL to the extension code.
3183 *) Various fixes to s3_pkt.c so alerts are sent properly.
3184 [David Holmes <d.holmes@f5.com>]
3186 *) Reduce the chances of duplicate issuer name and serial numbers (in
3187 violation of RFC3280) using the OpenSSL certificate creation utilities.
3188 This is done by creating a random 64 bit value for the initial serial
3189 number when a serial number file is created or when a self signed
3190 certificate is created using 'openssl req -x509'. The initial serial
3191 number file is created using 'openssl x509 -next_serial' in CA.pl
3192 rather than being initialized to 1.
3195 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
3197 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3198 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3199 [Joe Orton, Steve Henson]
3201 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
3203 [Joe Orton, Steve Henson]
3205 *) Make it possible to have multiple active certificates with the same
3206 subject in the CA index file. This is done only if the keyword
3207 'unique_subject' is set to 'no' in the main CA section (default
3208 if 'CA_default') of the configuration file. The value is saved
3209 with the database itself in a separate index attribute file,
3210 named like the index file with '.attr' appended to the name.
3213 *) X509 verify fixes. Disable broken certificate workarounds when
3214 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
3215 keyUsage extension present. Don't accept CRLs with unhandled critical
3216 extensions: since verify currently doesn't process CRL extensions this
3217 rejects a CRL with *any* critical extensions. Add new verify error codes
3221 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
3222 A clarification of RFC2560 will require the use of OCTET STRINGs and
3223 some implementations cannot handle the current raw format. Since OpenSSL
3224 copies and compares OCSP nonces as opaque blobs without any attempt at
3225 parsing them this should not create any compatibility issues.
3228 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
3229 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
3230 this HMAC (and other) operations are several times slower than OpenSSL
3234 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
3235 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3237 *) Use the correct content when signing type "other".
3240 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
3242 *) Fix various bugs revealed by running the NISCC test suite:
3244 Stop out of bounds reads in the ASN1 code when presented with
3245 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3247 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
3249 If verify callback ignores invalid public key errors don't try to check
3250 certificate signature with the NULL public key.
3254 *) New -ignore_err option in ocsp application to stop the server
3255 exiting on the first error in a request.
3258 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3259 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3263 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3264 extra data after the compression methods not only for TLS 1.0
3265 but also for SSL 3.0 (as required by the specification).
3266 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3268 *) Change X509_certificate_type() to mark the key as exported/exportable
3269 when it's 512 *bits* long, not 512 bytes.
3272 *) Change AES_cbc_encrypt() so it outputs exact multiple of
3273 blocks during encryption.
3276 *) Various fixes to base64 BIO and non blocking I/O. On write
3277 flushes were not handled properly if the BIO retried. On read
3278 data was not being buffered properly and had various logic bugs.
3279 This also affects blocking I/O when the data being decoded is a
3283 *) Various S/MIME bugfixes and compatibility changes:
3284 output correct application/pkcs7 MIME type if
3285 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
3286 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
3287 of files as .eml work). Correctly handle very long lines in MIME
3291 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
3293 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3294 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3295 a protocol version number mismatch like a decryption error
3296 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3299 *) Turn on RSA blinding by default in the default implementation
3300 to avoid a timing attack. Applications that don't want it can call
3301 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3302 They would be ill-advised to do so in most cases.
3303 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3305 *) Change RSA blinding code so that it works when the PRNG is not
3306 seeded (in this case, the secret RSA exponent is abused as
3307 an unpredictable seed -- if it is not unpredictable, there
3308 is no point in blinding anyway). Make RSA blinding thread-safe
3309 by remembering the creator's thread ID in rsa->blinding and
3310 having all other threads use local one-time blinding factors
3311 (this requires more computation than sharing rsa->blinding, but
3312 avoids excessive locking; and if an RSA object is not shared
3313 between threads, blinding will still be very fast).
3316 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
3317 ENGINE as defaults for all supported algorithms irrespective of
3318 the 'flags' parameter. 'flags' is now honoured, so applications
3319 should make sure they are passing it correctly.
3322 *) Target "mingw" now allows native Windows code to be generated in
3323 the Cygwin environment as well as with the MinGW compiler.
3326 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
3328 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3329 via timing by performing a MAC computation even if incorrrect
3330 block cipher padding has been found. This is a countermeasure
3331 against active attacks where the attacker has to distinguish
3332 between bad padding and a MAC verification error. (CVE-2003-0078)
3334 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3335 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3336 Martin Vuagnoux (EPFL, Ilion)]
3338 *) Make the no-err option work as intended. The intention with no-err
3339 is not to have the whole error stack handling routines removed from
3340 libcrypto, it's only intended to remove all the function name and
3341 reason texts, thereby removing some of the footprint that may not
3342 be interesting if those errors aren't displayed anyway.
3344 NOTE: it's still possible for any application or module to have it's
3345 own set of error texts inserted. The routines are there, just not
3346 used by default when no-err is given.
3349 *) Add support for FreeBSD on IA64.
3350 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
3352 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
3353 Kerberos function mit_des_cbc_cksum(). Before this change,
3354 the value returned by DES_cbc_cksum() was like the one from
3355 mit_des_cbc_cksum(), except the bytes were swapped.
3356 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
3358 *) Allow an application to disable the automatic SSL chain building.
3359 Before this a rather primitive chain build was always performed in
3360 ssl3_output_cert_chain(): an application had no way to send the
3361 correct chain if the automatic operation produced an incorrect result.
3363 Now the chain builder is disabled if either:
3365 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
3367 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
3369 The reasoning behind this is that an application would not want the
3370 auto chain building to take place if extra chain certificates are
3371 present and it might also want a means of sending no additional
3372 certificates (for example the chain has two certificates and the
3376 *) Add the possibility to build without the ENGINE framework.
3377 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3379 *) Under Win32 gmtime() can return NULL: check return value in
3380 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
3383 *) DSA routines: under certain error conditions uninitialized BN objects
3384 could be freed. Solution: make sure initialization is performed early
3385 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
3386 Nils Larsch <nla@trustcenter.de> via PR#459)
3389 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
3390 checked on reconnect on the client side, therefore session resumption
3391 could still fail with a "ssl session id is different" error. This
3392 behaviour is masked when SSL_OP_ALL is used due to
3393 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
3394 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3395 followup to PR #377.
3398 *) IA-32 assembler support enhancements: unified ELF targets, support
3399 for SCO/Caldera platforms, fix for Cygwin shared build.
3402 *) Add support for FreeBSD on sparc64. As a consequence, support for
3403 FreeBSD on non-x86 processors is separate from x86 processors on
3404 the config script, much like the NetBSD support.
3405 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
3407 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
3409 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
3412 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
3413 code (06) was taken as the first octet of the session ID and the last
3414 octet was ignored consequently. As a result SSLv2 client side session
3415 caching could not have worked due to the session ID mismatch between
3417 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3421 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
3422 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
3426 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
3427 seems that in spite of existing for more than a year, many application
3428 author have done nothing to provide the necessary callbacks, which
3429 means that this particular engine will not work properly anywhere.
3430 This is a very unfortunate situation which forces us, in the name
3431 of usability, to give the hw_ncipher.c a static lock, which is part
3433 NOTE: This is for the 0.9.7 series ONLY. This hack will never
3434 appear in 0.9.8 or later. We EXPECT application authors to have
3435 dealt properly with this when 0.9.8 is released (unless we actually
3436 make such changes in the libcrypto locking code that changes will
3437 have to be made anyway).
3440 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
3441 octets have been read, EOF or an error occurs. Without this change
3442 some truncated ASN1 structures will not produce an error.
3445 *) Disable Heimdal support, since it hasn't been fully implemented.
3446 Still give the possibility to force the use of Heimdal, but with
3447 warnings and a request that patches get sent to openssl-dev.
3450 *) Add the VC-CE target, introduce the WINCE sysname, and add
3451 INSTALL.WCE and appropriate conditionals to make it build.
3452 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3454 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
3455 cygssl-x.y.z.dll, where x, y and z are the major, minor and
3456 edit numbers of the version.
3457 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3459 *) Introduce safe string copy and catenation functions
3460 (BUF_strlcpy() and BUF_strlcat()).
3461 [Ben Laurie (CHATS) and Richard Levitte]
3463 *) Avoid using fixed-size buffers for one-line DNs.
3464 [Ben Laurie (CHATS)]
3466 *) Add BUF_MEM_grow_clean() to avoid information leakage when
3467 resizing buffers containing secrets, and use where appropriate.
3468 [Ben Laurie (CHATS)]
3470 *) Avoid using fixed size buffers for configuration file location.
3471 [Ben Laurie (CHATS)]
3473 *) Avoid filename truncation for various CA files.
3474 [Ben Laurie (CHATS)]
3476 *) Use sizeof in preference to magic numbers.
3477 [Ben Laurie (CHATS)]
3479 *) Avoid filename truncation in cert requests.
3480 [Ben Laurie (CHATS)]
3482 *) Add assertions to check for (supposedly impossible) buffer
3484 [Ben Laurie (CHATS)]
3486 *) Don't cache truncated DNS entries in the local cache (this could
3487 potentially lead to a spoofing attack).
3488 [Ben Laurie (CHATS)]
3490 *) Fix various buffers to be large enough for hex/decimal
3491 representations in a platform independent manner.
3492 [Ben Laurie (CHATS)]
3494 *) Add CRYPTO_realloc_clean() to avoid information leakage when
3495 resizing buffers containing secrets, and use where appropriate.
3496 [Ben Laurie (CHATS)]
3498 *) Add BIO_indent() to avoid much slightly worrying code to do
3500 [Ben Laurie (CHATS)]
3502 *) Convert sprintf()/BIO_puts() to BIO_printf().
3503 [Ben Laurie (CHATS)]
3505 *) buffer_gets() could terminate with the buffer only half
3507 [Ben Laurie (CHATS)]
3509 *) Add assertions to prevent user-supplied crypto functions from
3510 overflowing internal buffers by having large block sizes, etc.
3511 [Ben Laurie (CHATS)]
3513 *) New OPENSSL_assert() macro (similar to assert(), but enabled
3515 [Ben Laurie (CHATS)]
3517 *) Eliminate unused copy of key in RC4.
3518 [Ben Laurie (CHATS)]
3520 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
3521 [Ben Laurie (CHATS)]
3523 *) Fix off-by-one error in EGD path.
3524 [Ben Laurie (CHATS)]
3526 *) If RANDFILE path is too long, ignore instead of truncating.
3527 [Ben Laurie (CHATS)]
3529 *) Eliminate unused and incorrectly sized X.509 structure
3531 [Ben Laurie (CHATS)]
3533 *) Eliminate unused and dangerous function knumber().
3534 [Ben Laurie (CHATS)]
3536 *) Eliminate unused and dangerous structure, KSSL_ERR.
3537 [Ben Laurie (CHATS)]
3539 *) Protect against overlong session ID context length in an encoded
3540 session object. Since these are local, this does not appear to be
3542 [Ben Laurie (CHATS)]
3544 *) Change from security patch (see 0.9.6e below) that did not affect
3545 the 0.9.6 release series:
3547 Remote buffer overflow in SSL3 protocol - an attacker could
3548 supply an oversized master key in Kerberos-enabled versions.
3550 [Ben Laurie (CHATS)]
3552 *) Change the SSL kerb5 codes to match RFC 2712.
3555 *) Make -nameopt work fully for req and add -reqopt switch.
3556 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
3558 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
3559 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
3561 *) Make sure tests can be performed even if the corresponding algorithms
3562 have been removed entirely. This was also the last step to make
3563 OpenSSL compilable with DJGPP under all reasonable conditions.
3564 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
3566 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
3567 to allow version independent disabling of normally unselected ciphers,
3568 which may be activated as a side-effect of selecting a single cipher.
3570 (E.g., cipher list string "RSA" enables ciphersuites that are left
3571 out of "ALL" because they do not provide symmetric encryption.
3572 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
3573 [Lutz Jaenicke, Bodo Moeller]
3575 *) Add appropriate support for separate platform-dependent build
3576 directories. The recommended way to make a platform-dependent
3577 build directory is the following (tested on Linux), maybe with
3580 # Place yourself outside of the OpenSSL source tree. In
3581 # this example, the environment variable OPENSSL_SOURCE
3582 # is assumed to contain the absolute OpenSSL source directory.
3583 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
3584 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
3585 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
3586 mkdir -p `dirname $F`
3587 ln -s $OPENSSL_SOURCE/$F $F
3590 To be absolutely sure not to disturb the source tree, a "make clean"
3591 is a good thing. If it isn't successfull, don't worry about it,
3592 it probably means the source directory is very clean.
3595 *) Make sure any ENGINE control commands make local copies of string
3596 pointers passed to them whenever necessary. Otherwise it is possible
3597 the caller may have overwritten (or deallocated) the original string
3598 data when a later ENGINE operation tries to use the stored values.
3599 [Götz Babin-Ebell <babinebell@trustcenter.de>]
3601 *) Improve diagnostics in file reading and command-line digests.
3602 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
3604 *) Add AES modes CFB and OFB to the object database. Correct an
3605 error in AES-CFB decryption.
3608 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
3609 allows existing EVP_CIPHER_CTX structures to be reused after
3610 calling EVP_*Final(). This behaviour is used by encryption
3611 BIOs and some applications. This has the side effect that
3612 applications must explicitly clean up cipher contexts with
3613 EVP_CIPHER_CTX_cleanup() or they will leak memory.
3616 *) Check the values of dna and dnb in bn_mul_recursive before calling
3617 bn_mul_comba (a non zero value means the a or b arrays do not contain
3618 n2 elements) and fallback to bn_mul_normal if either is not zero.
3621 *) Fix escaping of non-ASCII characters when using the -subj option
3622 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
3625 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
3626 form for "surname", serialNumber has no short form.
3627 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
3628 therefore remove "mail" short name for "internet 7".
3629 The OID for unique identifiers in X509 certificates is
3630 x500UniqueIdentifier, not uniqueIdentifier.
3631 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
3634 *) Add an "init" command to the ENGINE config module and auto initialize
3635 ENGINEs. Without any "init" command the ENGINE will be initialized
3636 after all ctrl commands have been executed on it. If init=1 the
3637 ENGINE is initailized at that point (ctrls before that point are run
3638 on the uninitialized ENGINE and after on the initialized one). If
3639 init=0 then the ENGINE will not be iniatialized at all.
3642 *) Fix the 'app_verify_callback' interface so that the user-defined
3643 argument is actually passed to the callback: In the
3644 SSL_CTX_set_cert_verify_callback() prototype, the callback
3645 declaration has been changed from
3648 int (*cb)(X509_STORE_CTX *,void *);
3649 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
3650 i=s->ctx->app_verify_callback(&ctx)
3651 has been changed into
3652 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
3654 To update applications using SSL_CTX_set_cert_verify_callback(),
3655 a dummy argument can be added to their callback functions.
3656 [D. K. Smetters <smetters@parc.xerox.com>]
3658 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
3659 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
3661 *) Add and OPENSSL_LOAD_CONF define which will cause
3662 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
3663 This allows older applications to transparently support certain
3664 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
3665 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
3666 load the config file and OPENSSL_add_all_algorithms_conf() which will
3667 always load it have also been added.
3670 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
3671 Adjust NIDs and EVP layer.
3672 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3674 *) Config modules support in openssl utility.
3676 Most commands now load modules from the config file,
3677 though in a few (such as version) this isn't done
3678 because it couldn't be used for anything.
3680 In the case of ca and req the config file used is
3681 the same as the utility itself: that is the -config
3682 command line option can be used to specify an
3686 *) Move default behaviour from OPENSSL_config(). If appname is NULL
3687 use "openssl_conf" if filename is NULL use default openssl config file.
3690 *) Add an argument to OPENSSL_config() to allow the use of an alternative
3691 config section name. Add a new flag to tolerate a missing config file
3692 and move code to CONF_modules_load_file().
3695 *) Support for crypto accelerator cards from Accelerated Encryption
3696 Processing, www.aep.ie. (Use engine 'aep')
3697 The support was copied from 0.9.6c [engine] and adapted/corrected
3698 to work with the new engine framework.
3699 [AEP Inc. and Richard Levitte]
3701 *) Support for SureWare crypto accelerator cards from Baltimore
3702 Technologies. (Use engine 'sureware')
3703 The support was copied from 0.9.6c [engine] and adapted
3704 to work with the new engine framework.
3707 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
3708 make the newer ENGINE framework commands for the CHIL engine work.
3709 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
3711 *) Make it possible to produce shared libraries on ReliantUNIX.
3712 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
3714 *) Add the configuration target debug-linux-ppro.
3715 Make 'openssl rsa' use the general key loading routines
3716 implemented in apps.c, and make those routines able to
3717 handle the key format FORMAT_NETSCAPE and the variant
3719 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3721 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3722 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3724 *) Add -keyform to rsautl, and document -engine.
3725 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
3727 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
3728 BIO_R_NO_SUCH_FILE error code rather than the generic
3729 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
3732 *) Add new functions
3734 ERR_peek_last_error_line
3735 ERR_peek_last_error_line_data.
3736 These are similar to
3739 ERR_peek_error_line_data,
3740 but report on the latest error recorded rather than the first one
3741 still in the error queue.
3742 [Ben Laurie, Bodo Moeller]
3744 *) default_algorithms option in ENGINE config module. This allows things
3746 default_algorithms = ALL
3747 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
3750 *) Prelminary ENGINE config module.
3753 *) New experimental application configuration code.
3756 *) Change the AES code to follow the same name structure as all other
3757 symmetric ciphers, and behave the same way. Move everything to
3758 the directory crypto/aes, thereby obsoleting crypto/rijndael.
3759 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3761 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
3762 [Ben Laurie and Theo de Raadt]
3764 *) Add option to output public keys in req command.
3765 [Massimiliano Pala madwolf@openca.org]
3767 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
3768 (up to about 10% better than before for P-192 and P-224).
3771 *) New functions/macros
3773 SSL_CTX_set_msg_callback(ctx, cb)
3774 SSL_CTX_set_msg_callback_arg(ctx, arg)
3775 SSL_set_msg_callback(ssl, cb)
3776 SSL_set_msg_callback_arg(ssl, arg)
3778 to request calling a callback function
3780 void cb(int write_p, int version, int content_type,
3781 const void *buf, size_t len, SSL *ssl, void *arg)
3783 whenever a protocol message has been completely received
3784 (write_p == 0) or sent (write_p == 1). Here 'version' is the
3785 protocol version according to which the SSL library interprets
3786 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
3787 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
3788 the content type as defined in the SSL 3.0/TLS 1.0 protocol
3789 specification (change_cipher_spec(20), alert(21), handshake(22)).
3790 'buf' and 'len' point to the actual message, 'ssl' to the
3791 SSL object, and 'arg' is the application-defined value set by
3792 SSL[_CTX]_set_msg_callback_arg().
3794 'openssl s_client' and 'openssl s_server' have new '-msg' options
3795 to enable a callback that displays all protocol messages.
3798 *) Change the shared library support so shared libraries are built as
3799 soon as the corresponding static library is finished, and thereby get
3800 openssl and the test programs linked against the shared library.
3801 This still only happens when the keyword "shard" has been given to
3802 the configuration scripts.
3804 NOTE: shared library support is still an experimental thing, and
3805 backward binary compatibility is still not guaranteed.
3806 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
3808 *) Add support for Subject Information Access extension.
3809 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3811 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
3812 additional bytes when new memory had to be allocated, not just
3813 when reusing an existing buffer.
3816 *) New command line and configuration option 'utf8' for the req command.
3817 This allows field values to be specified as UTF8 strings.
3820 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
3821 runs for the former and machine-readable output for the latter.
3824 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
3825 of the e-mail address in the DN (i.e., it will go into a certificate
3826 extension only). The new configuration file option 'email_in_dn = no'
3827 has the same effect.
3828 [Massimiliano Pala madwolf@openca.org]
3830 *) Change all functions with names starting with des_ to be starting
3831 with DES_ instead. Add wrappers that are compatible with libdes,
3832 but are named _ossl_old_des_*. Finally, add macros that map the
3833 des_* symbols to the corresponding _ossl_old_des_* if libdes
3834 compatibility is desired. If OpenSSL 0.9.6c compatibility is
3835 desired, the des_* symbols will be mapped to DES_*, with one
3838 Since we provide two compatibility mappings, the user needs to
3839 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
3840 compatibility is desired. The default (i.e., when that macro
3841 isn't defined) is OpenSSL 0.9.6c compatibility.
3843 There are also macros that enable and disable the support of old
3844 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
3845 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
3846 are defined, the default will apply: to support the old des routines.
3848 In either case, one must include openssl/des.h to get the correct
3849 definitions. Do not try to just include openssl/des_old.h, that
3852 NOTE: This is a major break of an old API into a new one. Software
3853 authors are encouraged to switch to the DES_ style functions. Some
3854 time in the future, des_old.h and the libdes compatibility functions
3855 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
3856 default), and then completely removed.
3859 *) Test for certificates which contain unsupported critical extensions.
3860 If such a certificate is found during a verify operation it is
3861 rejected by default: this behaviour can be overridden by either
3862 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
3863 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
3864 X509_supported_extension() has also been added which returns 1 if a
3865 particular extension is supported.
3868 *) Modify the behaviour of EVP cipher functions in similar way to digests
3869 to retain compatibility with existing code.
3872 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
3873 compatibility with existing code. In particular the 'ctx' parameter does
3874 not have to be to be initialized before the call to EVP_DigestInit() and
3875 it is tidied up after a call to EVP_DigestFinal(). New function
3876 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
3877 EVP_MD_CTX_copy() changed to not require the destination to be
3878 initialized valid and new function EVP_MD_CTX_copy_ex() added which
3879 requires the destination to be valid.
3881 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
3882 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
3885 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
3886 so that complete 'Handshake' protocol structures are kept in memory
3887 instead of overwriting 'msg_type' and 'length' with 'body' data.
3890 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
3891 [Massimo Santin via Richard Levitte]
3893 *) Major restructuring to the underlying ENGINE code. This includes
3894 reduction of linker bloat, separation of pure "ENGINE" manipulation
3895 (initialisation, etc) from functionality dealing with implementations
3896 of specific crypto iterfaces. This change also introduces integrated
3897 support for symmetric ciphers and digest implementations - so ENGINEs
3898 can now accelerate these by providing EVP_CIPHER and EVP_MD
3899 implementations of their own. This is detailed in crypto/engine/README
3900 as it couldn't be adequately described here. However, there are a few
3901 API changes worth noting - some RSA, DSA, DH, and RAND functions that
3902 were changed in the original introduction of ENGINE code have now
3903 reverted back - the hooking from this code to ENGINE is now a good
3904 deal more passive and at run-time, operations deal directly with
3905 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
3906 dereferencing through an ENGINE pointer any more. Also, the ENGINE
3907 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
3908 they were not being used by the framework as there is no concept of a
3909 BIGNUM_METHOD and they could not be generalised to the new
3910 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
3911 ENGINE_cpy() has been removed as it cannot be consistently defined in
3915 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
3918 *) Change mkdef.pl to sort symbols that get the same entry number,
3919 and make sure the automatically generated functions ERR_load_*
3920 become part of libeay.num as well.
3923 *) New function SSL_renegotiate_pending(). This returns true once
3924 renegotiation has been requested (either SSL_renegotiate() call
3925 or HelloRequest/ClientHello receveived from the peer) and becomes
3926 false once a handshake has been completed.
3927 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
3928 sends a HelloRequest, but does not ensure that a handshake takes
3929 place. SSL_renegotiate_pending() is useful for checking if the
3930 client has followed the request.)
3933 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
3934 By default, clients may request session resumption even during
3935 renegotiation (if session ID contexts permit); with this option,
3936 session resumption is possible only in the first handshake.
3938 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
3939 more bits available for options that should not be part of
3940 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
3943 *) Add some demos for certificate and certificate request creation.
3946 *) Make maximum certificate chain size accepted from the peer application
3947 settable (SSL*_get/set_max_cert_list()), as proposed by
3948 "Douglas E. Engert" <deengert@anl.gov>.
3951 *) Add support for shared libraries for Unixware-7
3952 (Boyd Lynn Gerber <gerberb@zenez.com>).
3955 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
3956 be done prior to destruction. Use this to unload error strings from
3957 ENGINEs that load their own error strings. NB: This adds two new API
3958 functions to "get" and "set" this destroy handler in an ENGINE.
3961 *) Alter all existing ENGINE implementations (except "openssl" and
3962 "openbsd") to dynamically instantiate their own error strings. This
3963 makes them more flexible to be built both as statically-linked ENGINEs
3964 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
3965 Also, add stub code to each that makes building them as self-contained
3966 shared-libraries easier (see README.ENGINE).
3969 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
3970 implementations into applications that are completely implemented in
3971 self-contained shared-libraries. The "dynamic" ENGINE exposes control
3972 commands that can be used to configure what shared-library to load and
3973 to control aspects of the way it is handled. Also, made an update to
3974 the README.ENGINE file that brings its information up-to-date and
3975 provides some information and instructions on the "dynamic" ENGINE
3976 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
3979 *) Make it possible to unload ranges of ERR strings with a new
3980 "ERR_unload_strings" function.
3983 *) Add a copy() function to EVP_MD.
3986 *) Make EVP_MD routines take a context pointer instead of just the
3987 md_data void pointer.
3990 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
3991 that the digest can only process a single chunk of data
3992 (typically because it is provided by a piece of
3993 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
3994 is only going to provide a single chunk of data, and hence the
3995 framework needn't accumulate the data for oneshot drivers.
3998 *) As with "ERR", make it possible to replace the underlying "ex_data"
3999 functions. This change also alters the storage and management of global
4000 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
4001 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
4002 index counters. The API functions that use this state have been changed
4003 to take a "class_index" rather than pointers to the class's local STACK
4004 and counter, and there is now an API function to dynamically create new
4005 classes. This centralisation allows us to (a) plug a lot of the
4006 thread-safety problems that existed, and (b) makes it possible to clean
4007 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
4008 such data would previously have always leaked in application code and
4009 workarounds were in place to make the memory debugging turn a blind eye
4010 to it. Application code that doesn't use this new function will still
4011 leak as before, but their memory debugging output will announce it now
4012 rather than letting it slide.
4014 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
4015 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
4016 has a return value to indicate success or failure.
4019 *) Make it possible to replace the underlying "ERR" functions such that the
4020 global state (2 LHASH tables and 2 locks) is only used by the "default"
4021 implementation. This change also adds two functions to "get" and "set"
4022 the implementation prior to it being automatically set the first time
4023 any other ERR function takes place. Ie. an application can call "get",
4024 pass the return value to a module it has just loaded, and that module
4025 can call its own "set" function using that value. This means the
4026 module's "ERR" operations will use (and modify) the error state in the
4027 application and not in its own statically linked copy of OpenSSL code.
4030 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
4031 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
4032 the operation, and provides a more encapsulated way for external code
4033 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
4034 to use these functions rather than manually incrementing the counts.
4036 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
4039 *) Add EVP test program.
4042 *) Add symmetric cipher support to ENGINE. Expect the API to change!
4045 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
4046 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
4047 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
4048 These allow a CRL to be built without having to access X509_CRL fields
4049 directly. Modify 'ca' application to use new functions.
4052 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
4053 bug workarounds. Rollback attack detection is a security feature.
4054 The problem will only arise on OpenSSL servers when TLSv1 is not
4055 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
4056 Software authors not wanting to support TLSv1 will have special reasons
4057 for their choice and can explicitly enable this option.
4058 [Bodo Moeller, Lutz Jaenicke]
4060 *) Rationalise EVP so it can be extended: don't include a union of
4061 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
4062 (similar to those existing for EVP_CIPHER_CTX).
4067 EVP_MD_CTX_init(&md); /* new function call */
4068 EVP_DigestInit(&md, EVP_sha1());
4069 EVP_DigestUpdate(&md, in, len);
4070 EVP_DigestFinal(&md, out, NULL);
4071 EVP_MD_CTX_cleanup(&md); /* new function call */
4075 *) Make DES key schedule conform to the usual scheme, as well as
4076 correcting its structure. This means that calls to DES functions
4077 now have to pass a pointer to a des_key_schedule instead of a
4078 plain des_key_schedule (which was actually always a pointer
4081 des_key_schedule ks;
4083 des_set_key_checked(..., &ks);
4084 des_ncbc_encrypt(..., &ks, ...);
4086 (Note that a later change renames 'des_...' into 'DES_...'.)
4089 *) Initial reduction of linker bloat: the use of some functions, such as
4090 PEM causes large amounts of unused functions to be linked in due to
4091 poor organisation. For example pem_all.c contains every PEM function
4092 which has a knock on effect of linking in large amounts of (unused)
4093 ASN1 code. Grouping together similar functions and splitting unrelated
4094 functions prevents this.
4097 *) Cleanup of EVP macros.
4100 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
4101 correct _ecb suffix.
4104 *) Add initial OCSP responder support to ocsp application. The
4105 revocation information is handled using the text based index
4106 use by the ca application. The responder can either handle
4107 requests generated internally, supplied in files (for example
4108 via a CGI script) or using an internal minimal server.
4111 *) Add configuration choices to get zlib compression for TLS.
4114 *) Changes to Kerberos SSL for RFC 2712 compliance:
4115 1. Implemented real KerberosWrapper, instead of just using
4116 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
4117 2. Implemented optional authenticator field of KerberosWrapper.
4119 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
4120 and authenticator structs; see crypto/krb5/.
4122 Generalized Kerberos calls to support multiple Kerberos libraries.
4123 [Vern Staats <staatsvr@asc.hpc.mil>,
4124 Jeffrey Altman <jaltman@columbia.edu>
4125 via Richard Levitte]
4127 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
4128 already does with RSA. testdsa.h now has 'priv_key/pub_key'
4129 values for each of the key sizes rather than having just
4130 parameters (and 'speed' generating keys each time).
4133 *) Speed up EVP routines.
4136 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
4137 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
4138 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
4139 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
4141 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
4142 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
4143 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
4146 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
4148 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
4151 *) Added the OS2-EMX target.
4152 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
4154 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
4155 to support NCONF routines in extension code. New function CONF_set_nconf()
4156 to allow functions which take an NCONF to also handle the old LHASH
4157 structure: this means that the old CONF compatible routines can be
4158 retained (in particular wrt extensions) without having to duplicate the
4159 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
4162 *) Enhance the general user interface with mechanisms for inner control
4163 and with possibilities to have yes/no kind of prompts.
4166 *) Change all calls to low level digest routines in the library and
4167 applications to use EVP. Add missing calls to HMAC_cleanup() and
4168 don't assume HMAC_CTX can be copied using memcpy().
4169 [Verdon Walker <VWalker@novell.com>, Steve Henson]
4171 *) Add the possibility to control engines through control names but with
4172 arbitrary arguments instead of just a string.
4173 Change the key loaders to take a UI_METHOD instead of a callback
4174 function pointer. NOTE: this breaks binary compatibility with earlier
4175 versions of OpenSSL [engine].
4176 Adapt the nCipher code for these new conditions and add a card insertion
4180 *) Enhance the general user interface with mechanisms to better support
4181 dialog box interfaces, application-defined prompts, the possibility
4182 to use defaults (for example default passwords from somewhere else)
4183 and interrupts/cancellations.
4186 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
4187 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
4190 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
4191 tidy up some unnecessarily weird code in 'sk_new()').
4192 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
4194 *) Change the key loading routines for ENGINEs to use the same kind
4195 callback (pem_password_cb) as all other routines that need this
4199 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
4200 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
4201 than this minimum value is recommended.
4204 *) New random seeder for OpenVMS, using the system process statistics
4205 that are easily reachable.
4208 *) Windows apparently can't transparently handle global
4209 variables defined in DLLs. Initialisations such as:
4211 const ASN1_ITEM *it = &ASN1_INTEGER_it;
4213 wont compile. This is used by the any applications that need to
4214 declare their own ASN1 modules. This was fixed by adding the option
4215 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
4216 needed for static libraries under Win32.
4219 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
4220 setting of purpose and trust fields. New X509_STORE trust and
4221 purpose functions and tidy up setting in other SSL functions.
4224 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
4225 structure. These are inherited by X509_STORE_CTX when it is
4226 initialised. This allows various defaults to be set in the
4227 X509_STORE structure (such as flags for CRL checking and custom
4228 purpose or trust settings) for functions which only use X509_STORE_CTX
4229 internally such as S/MIME.
4231 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
4232 trust settings if they are not set in X509_STORE. This allows X509_STORE
4233 purposes and trust (in S/MIME for example) to override any set by default.
4235 Add command line options for CRL checking to smime, s_client and s_server
4239 *) Initial CRL based revocation checking. If the CRL checking flag(s)
4240 are set then the CRL is looked up in the X509_STORE structure and
4241 its validity and signature checked, then if the certificate is found
4242 in the CRL the verify fails with a revoked error.
4244 Various new CRL related callbacks added to X509_STORE_CTX structure.
4246 Command line options added to 'verify' application to support this.
4248 This needs some additional work, such as being able to handle multiple
4249 CRLs with different times, extension based lookup (rather than just
4250 by subject name) and ultimately more complete V2 CRL extension
4254 *) Add a general user interface API (crypto/ui/). This is designed
4255 to replace things like des_read_password and friends (backward
4256 compatibility functions using this new API are provided).
4257 The purpose is to remove prompting functions from the DES code
4258 section as well as provide for prompting through dialog boxes in
4259 a window system and the like.
4262 *) Add "ex_data" support to ENGINE so implementations can add state at a
4263 per-structure level rather than having to store it globally.
4266 *) Make it possible for ENGINE structures to be copied when retrieved by
4267 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
4268 This causes the "original" ENGINE structure to act like a template,
4269 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
4270 operational state can be localised to each ENGINE structure, despite the
4271 fact they all share the same "methods". New ENGINE structures returned in
4272 this case have no functional references and the return value is the single
4273 structural reference. This matches the single structural reference returned
4274 by ENGINE_by_id() normally, when it is incremented on the pre-existing
4278 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
4279 needs to match any other type at all we need to manually clear the
4283 *) Changes to the "openssl engine" utility to include;
4284 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
4285 about an ENGINE's available control commands.
4286 - executing control commands from command line arguments using the
4287 '-pre' and '-post' switches. '-post' is only used if '-t' is
4288 specified and the ENGINE is successfully initialised. The syntax for
4289 the individual commands are colon-separated, for example;
4290 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
4293 *) New dynamic control command support for ENGINEs. ENGINEs can now
4294 declare their own commands (numbers), names (strings), descriptions,
4295 and input types for run-time discovery by calling applications. A
4296 subset of these commands are implicitly classed as "executable"
4297 depending on their input type, and only these can be invoked through
4298 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
4299 can be based on user input, config files, etc). The distinction is
4300 that "executable" commands cannot return anything other than a boolean
4301 result and can only support numeric or string input, whereas some
4302 discoverable commands may only be for direct use through
4303 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
4304 pointers, or other custom uses. The "executable" commands are to
4305 support parameterisations of ENGINE behaviour that can be
4306 unambiguously defined by ENGINEs and used consistently across any
4307 OpenSSL-based application. Commands have been added to all the
4308 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
4309 control over shared-library paths without source code alterations.
4312 *) Changed all ENGINE implementations to dynamically allocate their
4313 ENGINEs rather than declaring them statically. Apart from this being
4314 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
4315 this also allows the implementations to compile without using the
4316 internal engine_int.h header.
4319 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
4320 'const' value. Any code that should be able to modify a RAND_METHOD
4321 should already have non-const pointers to it (ie. they should only
4322 modify their own ones).
4325 *) Made a variety of little tweaks to the ENGINE code.
4326 - "atalla" and "ubsec" string definitions were moved from header files
4327 to C code. "nuron" string definitions were placed in variables
4328 rather than hard-coded - allowing parameterisation of these values
4329 later on via ctrl() commands.
4330 - Removed unused "#if 0"'d code.
4331 - Fixed engine list iteration code so it uses ENGINE_free() to release
4332 structural references.
4333 - Constified the RAND_METHOD element of ENGINE structures.
4334 - Constified various get/set functions as appropriate and added
4335 missing functions (including a catch-all ENGINE_cpy that duplicates
4336 all ENGINE values onto a new ENGINE except reference counts/state).
4337 - Removed NULL parameter checks in get/set functions. Setting a method
4338 or function to NULL is a way of cancelling out a previously set
4339 value. Passing a NULL ENGINE parameter is just plain stupid anyway
4340 and doesn't justify the extra error symbols and code.
4341 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
4342 flags from engine_int.h to engine.h.
4343 - Changed prototypes for ENGINE handler functions (init(), finish(),
4344 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
4347 *) Implement binary inversion algorithm for BN_mod_inverse in addition
4348 to the algorithm using long division. The binary algorithm can be
4349 used only if the modulus is odd. On 32-bit systems, it is faster
4350 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
4351 roughly 5-15% for 256-bit moduli), so we use it only for moduli
4352 up to 450 bits. In 64-bit environments, the binary algorithm
4353 appears to be advantageous for much longer moduli; here we use it
4354 for moduli up to 2048 bits.
4357 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
4358 could not support the combine flag in choice fields.
4361 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
4362 extensions from a certificate request to the certificate.
4365 *) Allow multiple 'certopt' and 'nameopt' options to be separated
4366 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
4367 file: this allows the display of the certificate about to be
4368 signed to be customised, to allow certain fields to be included
4369 or excluded and extension details. The old system didn't display
4370 multicharacter strings properly, omitted fields not in the policy
4371 and couldn't display additional details such as extensions.
4374 *) Function EC_POINTs_mul for multiple scalar multiplication
4375 of an arbitrary number of elliptic curve points
4376 \sum scalars[i]*points[i],
4377 optionally including the generator defined for the EC_GROUP:
4378 scalar*generator + \sum scalars[i]*points[i].
4380 EC_POINT_mul is a simple wrapper function for the typical case
4381 that the point list has just one item (besides the optional
4385 *) First EC_METHODs for curves over GF(p):
4387 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
4388 operations and provides various method functions that can also
4389 operate with faster implementations of modular arithmetic.
4391 EC_GFp_mont_method() reuses most functions that are part of
4392 EC_GFp_simple_method, but uses Montgomery arithmetic.
4394 [Bodo Moeller; point addition and point doubling
4395 implementation directly derived from source code provided by
4396 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
4398 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
4399 crypto/ec/ec_lib.c):
4401 Curves are EC_GROUP objects (with an optional group generator)
4402 based on EC_METHODs that are built into the library.
4404 Points are EC_POINT objects based on EC_GROUP objects.
4406 Most of the framework would be able to handle curves over arbitrary
4407 finite fields, but as there are no obvious types for fields other
4408 than GF(p), some functions are limited to that for now.
4411 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
4412 that the file contains a complete HTTP response.
4415 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
4416 change the def and num file printf format specifier from "%-40sXXX"
4417 to "%-39s XXX". The latter will always guarantee a space after the
4418 field while the former will cause them to run together if the field
4419 is 40 of more characters long.
4422 *) Constify the cipher and digest 'method' functions and structures
4423 and modify related functions to take constant EVP_MD and EVP_CIPHER
4427 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
4428 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
4431 *) Modify EVP_Digest*() routines so they now return values. Although the
4432 internal software routines can never fail additional hardware versions
4436 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
4438 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
4439 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
4442 ERR_R_NESTED_ASN1_ERROR
4444 ERR_R_MISSING_ASN1_EOS
4445 were 4 .. 9, conflicting with
4446 ERR_LIB_RSA (= ERR_R_RSA_LIB)
4448 ERR_LIB_PEM (= ERR_R_PEM_LIB).
4449 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
4451 Add new error code 'ERR_R_INTERNAL_ERROR'.
4454 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
4458 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
4459 sets the subject name for a new request or supersedes the
4460 subject name in a given request. Formats that can be parsed are
4461 'CN=Some Name, OU=myOU, C=IT'
4463 'CN=Some Name/OU=myOU/C=IT'.
4465 Add options '-batch' and '-verbose' to 'openssl req'.
4466 [Massimiliano Pala <madwolf@hackmasters.net>]
4468 *) Introduce the possibility to access global variables through
4469 functions on platform were that's the best way to handle exporting
4470 global variables in shared libraries. To enable this functionality,
4471 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
4472 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
4473 is normally done by Configure or something similar).
4475 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
4476 in the source file (foo.c) like this:
4478 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
4479 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
4481 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
4482 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
4484 OPENSSL_DECLARE_GLOBAL(int,foo);
4485 #define foo OPENSSL_GLOBAL_REF(foo)
4486 OPENSSL_DECLARE_GLOBAL(double,bar);
4487 #define bar OPENSSL_GLOBAL_REF(bar)
4489 The #defines are very important, and therefore so is including the
4490 header file everywhere where the defined globals are used.
4492 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
4493 of ASN.1 items, but that structure is a bit different.
4495 The largest change is in util/mkdef.pl which has been enhanced with
4496 better and easier to understand logic to choose which symbols should
4497 go into the Windows .def files as well as a number of fixes and code
4498 cleanup (among others, algorithm keywords are now sorted
4499 lexicographically to avoid constant rewrites).
4502 *) In BN_div() keep a copy of the sign of 'num' before writing the
4503 result to 'rm' because if rm==num the value will be overwritten
4504 and produce the wrong result if 'num' is negative: this caused
4505 problems with BN_mod() and BN_nnmod().
4508 *) Function OCSP_request_verify(). This checks the signature on an
4509 OCSP request and verifies the signer certificate. The signer
4510 certificate is just checked for a generic purpose and OCSP request
4514 *) Add OCSP_check_validity() function to check the validity of OCSP
4515 responses. OCSP responses are prepared in real time and may only
4516 be a few seconds old. Simply checking that the current time lies
4517 between thisUpdate and nextUpdate max reject otherwise valid responses
4518 caused by either OCSP responder or client clock inaccuracy. Instead
4519 we allow thisUpdate and nextUpdate to fall within a certain period of
4520 the current time. The age of the response can also optionally be
4521 checked. Two new options -validity_period and -status_age added to
4525 *) If signature or public key algorithm is unrecognized print out its
4526 OID rather that just UNKNOWN.
4529 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
4530 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
4531 ID to be generated from the issuer certificate alone which can then be
4532 passed to OCSP_id_issuer_cmp().
4535 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
4536 ASN1 modules to export functions returning ASN1_ITEM pointers
4537 instead of the ASN1_ITEM structures themselves. This adds several
4538 new macros which allow the underlying ASN1 function/structure to
4539 be accessed transparently. As a result code should not use ASN1_ITEM
4540 references directly (such as &X509_it) but instead use the relevant
4541 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
4542 use of the new ASN1 code on platforms where exporting structures
4543 is problematical (for example in shared libraries) but exporting
4544 functions returning pointers to structures is not.
4547 *) Add support for overriding the generation of SSL/TLS session IDs.
4548 These callbacks can be registered either in an SSL_CTX or per SSL.
4549 The purpose of this is to allow applications to control, if they wish,
4550 the arbitrary values chosen for use as session IDs, particularly as it
4551 can be useful for session caching in multiple-server environments. A
4552 command-line switch for testing this (and any client code that wishes
4553 to use such a feature) has been added to "s_server".
4554 [Geoff Thorpe, Lutz Jaenicke]
4556 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
4557 of the form '#if defined(...) || defined(...) || ...' and
4558 '#if !defined(...) && !defined(...) && ...'. This also avoids
4559 the growing number of special cases it was previously handling.
4562 *) Make all configuration macros available for application by making
4563 sure they are available in opensslconf.h, by giving them names starting
4564 with "OPENSSL_" to avoid conflicts with other packages and by making
4565 sure e_os2.h will cover all platform-specific cases together with
4567 Additionally, it is now possible to define configuration/platform-
4568 specific names (called "system identities"). In the C code, these
4569 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
4570 macro with the name beginning with "OPENSSL_SYS_", which is determined
4571 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
4575 *) New option -set_serial to 'req' and 'x509' this allows the serial
4576 number to use to be specified on the command line. Previously self
4577 signed certificates were hard coded with serial number 0 and the
4578 CA options of 'x509' had to use a serial number in a file which was
4582 *) New options to 'ca' utility to support V2 CRL entry extensions.
4583 Currently CRL reason, invalidity date and hold instruction are
4584 supported. Add new CRL extensions to V3 code and some new objects.
4587 *) New function EVP_CIPHER_CTX_set_padding() this is used to
4588 disable standard block padding (aka PKCS#5 padding) in the EVP
4589 API, which was previously mandatory. This means that the data is
4590 not padded in any way and so the total length much be a multiple
4591 of the block size, otherwise an error occurs.
4594 *) Initial (incomplete) OCSP SSL support.
4597 *) New function OCSP_parse_url(). This splits up a URL into its host,
4598 port and path components: primarily to parse OCSP URLs. New -url
4599 option to ocsp utility.
4602 *) New nonce behavior. The return value of OCSP_check_nonce() now
4603 reflects the various checks performed. Applications can decide
4604 whether to tolerate certain situations such as an absent nonce
4605 in a response when one was present in a request: the ocsp application
4606 just prints out a warning. New function OCSP_add1_basic_nonce()
4607 this is to allow responders to include a nonce in a response even if
4608 the request is nonce-less.
4611 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
4612 skipped when using openssl x509 multiple times on a single input file,
4613 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
4616 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
4617 set string type: to handle setting ASN1_TIME structures. Fix ca
4618 utility to correctly initialize revocation date of CRLs.
4621 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
4622 the clients preferred ciphersuites and rather use its own preferences.
4623 Should help to work around M$ SGC (Server Gated Cryptography) bug in
4624 Internet Explorer by ensuring unchanged hash method during stepup.
4625 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
4628 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
4629 to aes and add a new 'exist' option to print out symbols that don't
4633 *) Additional options to ocsp utility to allow flags to be set and
4634 additional certificates supplied.
4637 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
4638 OCSP client a number of certificate to only verify the response
4642 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
4643 handle the new API. Currently only ECB, CBC modes supported. Add new
4646 Add TLS AES ciphersuites as described in RFC3268, "Advanced
4647 Encryption Standard (AES) Ciphersuites for Transport Layer
4648 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
4649 not enabled by default and were not part of the "ALL" ciphersuite
4650 alias because they were not yet official; they could be
4651 explicitly requested by specifying the "AESdraft" ciphersuite
4652 group alias. In the final release of OpenSSL 0.9.7, the group
4653 alias is called "AES" and is part of "ALL".)
4654 [Ben Laurie, Steve Henson, Bodo Moeller]
4656 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
4657 request to response.
4660 *) Functions for OCSP responders. OCSP_request_onereq_count(),
4661 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
4662 extract information from a certificate request. OCSP_response_create()
4663 creates a response and optionally adds a basic response structure.
4664 OCSP_basic_add1_status() adds a complete single response to a basic
4665 response and returns the OCSP_SINGLERESP structure just added (to allow
4666 extensions to be included for example). OCSP_basic_add1_cert() adds a
4667 certificate to a basic response and OCSP_basic_sign() signs a basic
4668 response with various flags. New helper functions ASN1_TIME_check()
4669 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
4670 (converts ASN1_TIME to GeneralizedTime).
4673 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
4674 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
4675 structure from a certificate. X509_pubkey_digest() digests the public_key
4676 contents: this is used in various key identifiers.
4679 *) Make sk_sort() tolerate a NULL argument.
4680 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
4682 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
4683 passed by the function are trusted implicitly. If any of them signed the
4684 response then it is assumed to be valid and is not verified.
4687 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
4688 to data. This was previously part of the PKCS7 ASN1 code. This
4689 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
4690 [Steve Henson, reported by Kenneth R. Robinette
4691 <support@securenetterm.com>]
4693 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
4694 routines: without these tracing memory leaks is very painful.
4695 Fix leaks in PKCS12 and PKCS7 routines.
4698 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
4699 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
4700 effectively meant GeneralizedTime would never be used. Now it
4701 is initialised to -1 but X509_time_adj() now has to check the value
4702 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
4703 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
4704 [Steve Henson, reported by Kenneth R. Robinette
4705 <support@securenetterm.com>]
4707 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
4708 result in a zero length in the ASN1_INTEGER structure which was
4709 not consistent with the structure when d2i_ASN1_INTEGER() was used
4710 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
4711 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
4712 where it did not print out a minus for negative ASN1_INTEGER.
4715 *) Add summary printout to ocsp utility. The various functions which
4716 convert status values to strings have been renamed to:
4717 OCSP_response_status_str(), OCSP_cert_status_str() and
4718 OCSP_crl_reason_str() and are no longer static. New options
4719 to verify nonce values and to disable verification. OCSP response
4720 printout format cleaned up.
4723 *) Add additional OCSP certificate checks. These are those specified
4724 in RFC2560. This consists of two separate checks: the CA of the
4725 certificate being checked must either be the OCSP signer certificate
4726 or the issuer of the OCSP signer certificate. In the latter case the
4727 OCSP signer certificate must contain the OCSP signing extended key
4728 usage. This check is performed by attempting to match the OCSP
4729 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
4730 in the OCSP_CERTID structures of the response.
4733 *) Initial OCSP certificate verification added to OCSP_basic_verify()
4734 and related routines. This uses the standard OpenSSL certificate
4735 verify routines to perform initial checks (just CA validity) and
4736 to obtain the certificate chain. Then additional checks will be
4737 performed on the chain. Currently the root CA is checked to see
4738 if it is explicitly trusted for OCSP signing. This is used to set
4739 a root CA as a global signing root: that is any certificate that
4740 chains to that CA is an acceptable OCSP signing certificate.
4743 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
4744 extensions from a separate configuration file.
4745 As when reading extensions from the main configuration file,
4746 the '-extensions ...' option may be used for specifying the
4748 [Massimiliano Pala <madwolf@comune.modena.it>]
4750 *) New OCSP utility. Allows OCSP requests to be generated or
4751 read. The request can be sent to a responder and the output
4752 parsed, outputed or printed in text form. Not complete yet:
4753 still needs to check the OCSP response validity.
4756 *) New subcommands for 'openssl ca':
4757 'openssl ca -status <serial>' prints the status of the cert with
4758 the given serial number (according to the index file).
4759 'openssl ca -updatedb' updates the expiry status of certificates
4761 [Massimiliano Pala <madwolf@comune.modena.it>]
4763 *) New '-newreq-nodes' command option to CA.pl. This is like
4764 '-newreq', but calls 'openssl req' with the '-nodes' option
4765 so that the resulting key is not encrypted.
4766 [Damien Miller <djm@mindrot.org>]
4768 *) New configuration for the GNU Hurd.
4769 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
4771 *) Initial code to implement OCSP basic response verify. This
4772 is currently incomplete. Currently just finds the signer's
4773 certificate and verifies the signature on the response.
4776 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
4777 value of OPENSSLDIR. This is available via the new '-d' option
4778 to 'openssl version', and is also included in 'openssl version -a'.
4781 *) Allowing defining memory allocation callbacks that will be given
4782 file name and line number information in additional arguments
4783 (a const char* and an int). The basic functionality remains, as
4784 well as the original possibility to just replace malloc(),
4785 realloc() and free() by functions that do not know about these
4786 additional arguments. To register and find out the current
4787 settings for extended allocation functions, the following
4788 functions are provided:
4790 CRYPTO_set_mem_ex_functions
4791 CRYPTO_set_locked_mem_ex_functions
4792 CRYPTO_get_mem_ex_functions
4793 CRYPTO_get_locked_mem_ex_functions
4795 These work the same way as CRYPTO_set_mem_functions and friends.
4796 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
4797 extended allocation function is enabled.
4798 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
4799 a conventional allocation function is enabled.
4800 [Richard Levitte, Bodo Moeller]
4802 *) Finish off removing the remaining LHASH function pointer casts.
4803 There should no longer be any prototype-casting required when using
4804 the LHASH abstraction, and any casts that remain are "bugs". See
4805 the callback types and macros at the head of lhash.h for details
4806 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
4809 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
4810 If /dev/[u]random devices are not available or do not return enough
4811 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
4813 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
4814 /etc/entropy will be queried once each in this sequence, quering stops
4815 when enough entropy was collected without querying more sockets.
4818 *) Change the Unix RAND_poll() variant to be able to poll several
4819 random devices, as specified by DEVRANDOM, until a sufficient amount
4820 of data has been collected. We spend at most 10 ms on each file
4821 (select timeout) and read in non-blocking mode. DEVRANDOM now
4822 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
4823 (previously it was just the string "/dev/urandom"), so on typical
4824 platforms the 10 ms delay will never occur.
4825 Also separate out the Unix variant to its own file, rand_unix.c.
4826 For VMS, there's a currently-empty rand_vms.c.
4829 *) Move OCSP client related routines to ocsp_cl.c. These
4830 provide utility functions which an application needing
4831 to issue a request to an OCSP responder and analyse the
4832 response will typically need: as opposed to those which an
4833 OCSP responder itself would need which will be added later.
4835 OCSP_request_sign() signs an OCSP request with an API similar
4836 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
4837 response. OCSP_response_get1_basic() extracts basic response
4838 from response. OCSP_resp_find_status(): finds and extracts status
4839 information from an OCSP_CERTID structure (which will be created
4840 when the request structure is built). These are built from lower
4841 level functions which work on OCSP_SINGLERESP structures but
4842 wont normally be used unless the application wishes to examine
4843 extensions in the OCSP response for example.
4845 Replace nonce routines with a pair of functions.
4846 OCSP_request_add1_nonce() adds a nonce value and optionally
4847 generates a random value. OCSP_check_nonce() checks the
4848 validity of the nonce in an OCSP response.
4851 *) Change function OCSP_request_add() to OCSP_request_add0_id().
4852 This doesn't copy the supplied OCSP_CERTID and avoids the
4853 need to free up the newly created id. Change return type
4854 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
4855 This can then be used to add extensions to the request.
4856 Deleted OCSP_request_new(), since most of its functionality
4857 is now in OCSP_REQUEST_new() (and the case insensitive name
4858 clash) apart from the ability to set the request name which
4859 will be added elsewhere.
4862 *) Update OCSP API. Remove obsolete extensions argument from
4863 various functions. Extensions are now handled using the new
4864 OCSP extension code. New simple OCSP HTTP function which
4865 can be used to send requests and parse the response.
4868 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
4869 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
4870 uses the special reorder version of SET OF to sort the attributes
4871 and reorder them to match the encoded order. This resolves a long
4872 standing problem: a verify on a PKCS7 structure just after signing
4873 it used to fail because the attribute order did not match the
4874 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
4875 it uses the received order. This is necessary to tolerate some broken
4876 software that does not order SET OF. This is handled by encoding
4877 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
4878 to produce the required SET OF.
4881 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
4882 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
4883 files to get correct declarations of the ASN.1 item variables.
4886 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
4887 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
4888 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
4889 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
4890 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
4891 ASN1_ITEM and no wrapper functions.
4894 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
4895 replace the old function pointer based I/O routines. Change most of
4896 the *_d2i_bio() and *_d2i_fp() functions to use these.
4899 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
4900 lines, recognice more "algorithms" that can be deselected, and make
4901 it complain about algorithm deselection that isn't recognised.
4904 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
4905 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
4906 to use new functions. Add NO_ASN1_OLD which can be set to remove
4907 some old style ASN1 functions: this can be used to determine if old
4908 code will still work when these eventually go away.
4911 *) New extension functions for OCSP structures, these follow the
4912 same conventions as certificates and CRLs.
4915 *) New function X509V3_add1_i2d(). This automatically encodes and
4916 adds an extension. Its behaviour can be customised with various
4917 flags to append, replace or delete. Various wrappers added for
4918 certifcates and CRLs.
4921 *) Fix to avoid calling the underlying ASN1 print routine when
4922 an extension cannot be parsed. Correct a typo in the
4923 OCSP_SERVICELOC extension. Tidy up print OCSP format.
4926 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
4927 entries for variables.
4930 *) Add functionality to apps/openssl.c for detecting locking
4931 problems: As the program is single-threaded, all we have
4932 to do is register a locking callback using an array for
4933 storing which locks are currently held by the program.
4936 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
4937 SSL_get_ex_data_X509_STORE_idx(), which is used in
4938 ssl_verify_cert_chain() and thus can be called at any time
4939 during TLS/SSL handshakes so that thread-safety is essential.
4940 Unfortunately, the ex_data design is not at all suited
4941 for multi-threaded use, so it probably should be abolished.
4944 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
4945 [Broadcom, tweaked and integrated by Geoff Thorpe]
4947 *) Move common extension printing code to new function
4948 X509V3_print_extensions(). Reorganise OCSP print routines and
4949 implement some needed OCSP ASN1 functions. Add OCSP extensions.
4952 *) New function X509_signature_print() to remove duplication in some
4956 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
4957 set (this was treated exactly the same as SET OF previously). This
4958 is used to reorder the STACK representing the structure to match the
4959 encoding. This will be used to get round a problem where a PKCS7
4960 structure which was signed could not be verified because the STACK
4961 order did not reflect the encoded order.
4964 *) Reimplement the OCSP ASN1 module using the new code.
4967 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
4968 for its ASN1 operations. The old style function pointers still exist
4969 for now but they will eventually go away.
4972 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
4973 completely replaces the old ASN1 functionality with a table driven
4974 encoder and decoder which interprets an ASN1_ITEM structure describing
4975 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
4976 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
4977 has also been converted to the new form.
4980 *) Change BN_mod_exp_recp so that negative moduli are tolerated
4981 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
4982 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
4983 for negative moduli.
4986 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
4987 of not touching the result's sign bit.
4990 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
4994 *) Changed the LHASH code to use prototypes for callbacks, and created
4995 macros to declare and implement thin (optionally static) functions
4996 that provide type-safety and avoid function pointer casting for the
4997 type-specific callbacks.
5000 *) Added Kerberos Cipher Suites to be used with TLS, as written in
5002 [Veers Staats <staatsvr@asc.hpc.mil>,
5003 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
5005 *) Reformat the FAQ so the different questions and answers can be divided
5006 in sections depending on the subject.
5009 *) Have the zlib compression code load ZLIB.DLL dynamically under
5013 *) New function BN_mod_sqrt for computing square roots modulo a prime
5014 (using the probabilistic Tonelli-Shanks algorithm unless
5015 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
5016 be handled deterministically).
5017 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5019 *) Make BN_mod_inverse faster by explicitly handling small quotients
5020 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
5021 512 bits], about 30% for larger ones [1024 or 2048 bits].)
5024 *) New function BN_kronecker.
5027 *) Fix BN_gcd so that it works on negative inputs; the result is
5028 positive unless both parameters are zero.
5029 Previously something reasonably close to an infinite loop was
5030 possible because numbers could be growing instead of shrinking
5031 in the implementation of Euclid's algorithm.
5034 *) Fix BN_is_word() and BN_is_one() macros to take into account the
5035 sign of the number in question.
5037 Fix BN_is_word(a,w) to work correctly for w == 0.
5039 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
5040 because its test if the absolute value of 'a' equals 'w'.
5041 Note that BN_abs_is_word does *not* handle w == 0 reliably;
5042 it exists mostly for use in the implementations of BN_is_zero(),
5043 BN_is_one(), and BN_is_word().
5046 *) New function BN_swap.
5049 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
5050 the exponentiation functions are more likely to produce reasonable
5051 results on negative inputs.
5054 *) Change BN_mod_mul so that the result is always non-negative.
5055 Previously, it could be negative if one of the factors was negative;
5056 I don't think anyone really wanted that behaviour.
5059 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
5060 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
5061 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
5062 and add new functions:
5071 BN_mod_lshift1_quick
5075 These functions always generate non-negative results.
5077 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
5078 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
5080 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
5081 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
5082 be reduced modulo m.
5083 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5086 The following entry accidentily appeared in the CHANGES file
5087 distributed with OpenSSL 0.9.7. The modifications described in
5088 it do *not* apply to OpenSSL 0.9.7.
5090 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5091 was actually never needed) and in BN_mul(). The removal in BN_mul()
5092 required a small change in bn_mul_part_recursive() and the addition
5093 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5094 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5095 bn_sub_words() and bn_add_words() except they take arrays with
5100 *) In 'openssl passwd', verify passwords read from the terminal
5101 unless the '-salt' option is used (which usually means that
5102 verification would just waste user's time since the resulting
5103 hash is going to be compared with some given password hash)
5104 or the new '-noverify' option is used.
5106 This is an incompatible change, but it does not affect
5107 non-interactive use of 'openssl passwd' (passwords on the command
5108 line, '-stdin' option, '-in ...' option) and thus should not
5112 *) Remove all references to RSAref, since there's no more need for it.
5115 *) Make DSO load along a path given through an environment variable
5116 (SHLIB_PATH) with shl_load().
5119 *) Constify the ENGINE code as a result of BIGNUM constification.
5120 Also constify the RSA code and most things related to it. In a
5121 few places, most notable in the depth of the ASN.1 code, ugly
5122 casts back to non-const were required (to be solved at a later
5126 *) Make it so the openssl application has all engines loaded by default.
5129 *) Constify the BIGNUM routines a little more.
5132 *) Add the following functions:
5134 ENGINE_load_cswift()
5136 ENGINE_load_atalla()
5138 ENGINE_load_builtin_engines()
5140 That way, an application can itself choose if external engines that
5141 are built-in in OpenSSL shall ever be used or not. The benefit is
5142 that applications won't have to be linked with libdl or other dso
5143 libraries unless it's really needed.
5145 Changed 'openssl engine' to load all engines on demand.
5146 Changed the engine header files to avoid the duplication of some
5147 declarations (they differed!).
5150 *) 'openssl engine' can now list capabilities.
5153 *) Better error reporting in 'openssl engine'.
5156 *) Never call load_dh_param(NULL) in s_server.
5159 *) Add engine application. It can currently list engines by name and
5160 identity, and test if they are actually available.
5163 *) Improve RPM specification file by forcing symbolic linking and making
5164 sure the installed documentation is also owned by root.root.
5165 [Damien Miller <djm@mindrot.org>]
5167 *) Give the OpenSSL applications more possibilities to make use of
5168 keys (public as well as private) handled by engines.
5171 *) Add OCSP code that comes from CertCo.
5174 *) Add VMS support for the Rijndael code.
5177 *) Added untested support for Nuron crypto accelerator.
5180 *) Add support for external cryptographic devices. This code was
5181 previously distributed separately as the "engine" branch.
5182 [Geoff Thorpe, Richard Levitte]
5184 *) Rework the filename-translation in the DSO code. It is now possible to
5185 have far greater control over how a "name" is turned into a filename
5186 depending on the operating environment and any oddities about the
5187 different shared library filenames on each system.
5190 *) Support threads on FreeBSD-elf in Configure.
5193 *) Fix for SHA1 assembly problem with MASM: it produces
5194 warnings about corrupt line number information when assembling
5195 with debugging information. This is caused by the overlapping
5197 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
5200 NCONF_get_number() has no error checking at all. As a replacement,
5201 NCONF_get_number_e() is defined (_e for "error checking") and is
5202 promoted strongly. The old NCONF_get_number is kept around for
5203 binary backward compatibility.
5204 Make it possible for methods to load from something other than a BIO,
5205 by providing a function pointer that is given a name instead of a BIO.
5206 For example, this could be used to load configuration data from an
5210 *) Fix for non blocking accept BIOs. Added new I/O special reason
5211 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
5212 with non blocking I/O was not possible because no retry code was
5213 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
5217 *) Added the beginnings of Rijndael support.
5220 *) Fix for bug in DirectoryString mask setting. Add support for
5221 X509_NAME_print_ex() in 'req' and X509_print_ex() function
5222 to allow certificate printing to more controllable, additional
5223 'certopt' option to 'x509' to allow new printing options to be
5227 *) Clean old EAY MD5 hack from e_os.h.
5230 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
5232 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5233 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5234 [Joe Orton, Steve Henson]
5236 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
5238 *) Fix additional bug revealed by the NISCC test suite:
5240 Stop bug triggering large recursion when presented with
5241 certain ASN.1 tags (CVE-2003-0851)
5244 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
5246 *) Fix various bugs revealed by running the NISCC test suite:
5248 Stop out of bounds reads in the ASN1 code when presented with
5249 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5251 If verify callback ignores invalid public key errors don't try to check
5252 certificate signature with the NULL public key.
5256 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5257 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5261 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5262 extra data after the compression methods not only for TLS 1.0
5263 but also for SSL 3.0 (as required by the specification).
5264 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5266 *) Change X509_certificate_type() to mark the key as exported/exportable
5267 when it's 512 *bits* long, not 512 bytes.
5270 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
5272 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5273 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5274 a protocol version number mismatch like a decryption error
5275 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5278 *) Turn on RSA blinding by default in the default implementation
5279 to avoid a timing attack. Applications that don't want it can call
5280 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5281 They would be ill-advised to do so in most cases.
5282 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5284 *) Change RSA blinding code so that it works when the PRNG is not
5285 seeded (in this case, the secret RSA exponent is abused as
5286 an unpredictable seed -- if it is not unpredictable, there
5287 is no point in blinding anyway). Make RSA blinding thread-safe
5288 by remembering the creator's thread ID in rsa->blinding and
5289 having all other threads use local one-time blinding factors
5290 (this requires more computation than sharing rsa->blinding, but
5291 avoids excessive locking; and if an RSA object is not shared
5292 between threads, blinding will still be very fast).
5295 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
5297 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5298 via timing by performing a MAC computation even if incorrrect
5299 block cipher padding has been found. This is a countermeasure
5300 against active attacks where the attacker has to distinguish
5301 between bad padding and a MAC verification error. (CVE-2003-0078)
5303 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5304 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5305 Martin Vuagnoux (EPFL, Ilion)]
5307 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
5309 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
5310 memory from it's contents. This is done with a counter that will
5311 place alternating values in each byte. This can be used to solve
5312 two issues: 1) the removal of calls to memset() by highly optimizing
5313 compilers, and 2) cleansing with other values than 0, since those can
5314 be read through on certain media, for example a swap space on disk.
5317 *) Bugfix: client side session caching did not work with external caching,
5318 because the session->cipher setting was not restored when reloading
5319 from the external cache. This problem was masked, when
5320 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
5321 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
5324 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
5325 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
5326 [Zeev Lieber <zeev-l@yahoo.com>]
5328 *) Undo an undocumented change introduced in 0.9.6e which caused
5329 repeated calls to OpenSSL_add_all_ciphers() and
5330 OpenSSL_add_all_digests() to be ignored, even after calling
5334 *) Change the default configuration reader to deal with last line not
5335 being properly terminated.
5338 *) Change X509_NAME_cmp() so it applies the special rules on handling
5339 DN values that are of type PrintableString, as well as RDNs of type
5340 emailAddress where the value has the type ia5String.
5341 [stefank@valicert.com via Richard Levitte]
5343 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
5344 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
5345 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
5346 the bitwise-OR of the two for use by the majority of applications
5347 wanting this behaviour, and update the docs. The documented
5348 behaviour and actual behaviour were inconsistent and had been
5349 changing anyway, so this is more a bug-fix than a behavioural
5351 [Geoff Thorpe, diagnosed by Nadav Har'El]
5353 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
5354 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
5357 *) Fix initialization code race conditions in
5358 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
5359 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
5360 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
5361 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
5362 ssl2_get_cipher_by_char(),
5363 ssl3_get_cipher_by_char().
5364 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
5366 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
5367 the cached sessions are flushed, as the remove_cb() might use ex_data
5368 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
5369 (see [openssl.org #212]).
5370 [Geoff Thorpe, Lutz Jaenicke]
5372 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
5373 length, instead of the encoding length to d2i_ASN1_OBJECT.
5376 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
5378 *) [In 0.9.6g-engine release:]
5379 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
5380 [Lynn Gazis <lgazis@rainbow.com>]
5382 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
5384 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
5385 and get fix the header length calculation.
5386 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
5387 Alon Kantor <alonk@checkpoint.com> (and others),
5390 *) Use proper error handling instead of 'assertions' in buffer
5391 overflow checks added in 0.9.6e. This prevents DoS (the
5392 assertions could call abort()).
5393 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
5395 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
5397 *) Add various sanity checks to asn1_get_length() to reject
5398 the ASN1 length bytes if they exceed sizeof(long), will appear
5399 negative or the content length exceeds the length of the
5401 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5403 *) Fix cipher selection routines: ciphers without encryption had no flags
5404 for the cipher strength set and where therefore not handled correctly
5405 by the selection routines (PR #130).
5408 *) Fix EVP_dsa_sha macro.
5412 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
5413 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
5414 that was added in OpenSSL 0.9.6d.
5416 As the countermeasure turned out to be incompatible with some
5417 broken SSL implementations, the new option is part of SSL_OP_ALL.
5418 SSL_OP_ALL is usually employed when compatibility with weird SSL
5419 implementations is desired (e.g. '-bugs' option to 's_client' and
5420 's_server'), so the new option is automatically set in many
5424 *) Changes in security patch:
5426 Changes marked "(CHATS)" were sponsored by the Defense Advanced
5427 Research Projects Agency (DARPA) and Air Force Research Laboratory,
5428 Air Force Materiel Command, USAF, under agreement number
5431 *) Add various sanity checks to asn1_get_length() to reject
5432 the ASN1 length bytes if they exceed sizeof(long), will appear
5433 negative or the content length exceeds the length of the
5434 supplied buffer. (CVE-2002-0659)
5435 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5437 *) Assertions for various potential buffer overflows, not known to
5439 [Ben Laurie (CHATS)]
5441 *) Various temporary buffers to hold ASCII versions of integers were
5442 too small for 64 bit platforms. (CVE-2002-0655)
5443 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
5445 *) Remote buffer overflow in SSL3 protocol - an attacker could
5446 supply an oversized session ID to a client. (CVE-2002-0656)
5447 [Ben Laurie (CHATS)]
5449 *) Remote buffer overflow in SSL2 protocol - an attacker could
5450 supply an oversized client master key. (CVE-2002-0656)
5451 [Ben Laurie (CHATS)]
5453 Changes between 0.9.6c and 0.9.6d [9 May 2002]
5455 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
5456 encoded as NULL) with id-dsa-with-sha1.
5457 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
5459 *) Check various X509_...() return values in apps/req.c.
5460 [Nils Larsch <nla@trustcenter.de>]
5462 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
5463 an end-of-file condition would erronously be flagged, when the CRLF
5464 was just at the end of a processed block. The bug was discovered when
5465 processing data through a buffering memory BIO handing the data to a
5466 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
5467 <ptsekov@syntrex.com> and Nedelcho Stanev.
5470 *) Implement a countermeasure against a vulnerability recently found
5471 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
5472 before application data chunks to avoid the use of known IVs
5473 with data potentially chosen by the attacker.
5476 *) Fix length checks in ssl3_get_client_hello().
5479 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
5480 to prevent ssl3_read_internal() from incorrectly assuming that
5481 ssl3_read_bytes() found application data while handshake
5482 processing was enabled when in fact s->s3->in_read_app_data was
5483 merely automatically cleared during the initial handshake.
5484 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
5486 *) Fix object definitions for Private and Enterprise: they were not
5487 recognized in their shortname (=lowercase) representation. Extend
5488 obj_dat.pl to issue an error when using undefined keywords instead
5489 of silently ignoring the problem (Svenning Sorensen
5490 <sss@sss.dnsalias.net>).
5493 *) Fix DH_generate_parameters() so that it works for 'non-standard'
5494 generators, i.e. generators other than 2 and 5. (Previously, the
5495 code did not properly initialise the 'add' and 'rem' values to
5496 BN_generate_prime().)
5498 In the new general case, we do not insist that 'generator' is
5499 actually a primitive root: This requirement is rather pointless;
5500 a generator of the order-q subgroup is just as good, if not
5504 *) Map new X509 verification errors to alerts. Discovered and submitted by
5505 Tom Wu <tom@arcot.com>.
5508 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
5509 returning non-zero before the data has been completely received
5510 when using non-blocking I/O.
5511 [Bodo Moeller; problem pointed out by John Hughes]
5513 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
5514 [Ben Laurie, Lutz Jaenicke]
5516 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
5517 Yoram Zahavi <YoramZ@gilian.com>).
5520 *) Add information about CygWin 1.3 and on, and preserve proper
5521 configuration for the versions before that.
5522 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
5524 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
5525 check whether we deal with a copy of a session and do not delete from
5526 the cache in this case. Problem reported by "Izhar Shoshani Levi"
5527 <izhar@checkpoint.com>.
5530 *) Do not store session data into the internal session cache, if it
5531 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
5532 flag is set). Proposed by Aslam <aslam@funk.com>.
5535 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
5539 *) [In 0.9.6d-engine release:]
5540 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
5541 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5543 *) Add the configuration target linux-s390x.
5544 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
5546 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
5547 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
5548 variable as an indication that a ClientHello message has been
5549 received. As the flag value will be lost between multiple
5550 invocations of ssl3_accept when using non-blocking I/O, the
5551 function may not be aware that a handshake has actually taken
5552 place, thus preventing a new session from being added to the
5555 To avoid this problem, we now set s->new_session to 2 instead of
5556 using a local variable.
5557 [Lutz Jaenicke, Bodo Moeller]
5559 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
5560 if the SSL_R_LENGTH_MISMATCH error is detected.
5561 [Geoff Thorpe, Bodo Moeller]
5563 *) New 'shared_ldflag' column in Configure platform table.
5566 *) Fix EVP_CIPHER_mode macro.
5567 ["Dan S. Camper" <dan@bti.net>]
5569 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
5570 type, we must throw them away by setting rr->length to 0.
5571 [D P Chang <dpc@qualys.com>]
5573 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
5575 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
5576 <Dominikus.Scherkl@biodata.com>. (The previous implementation
5577 worked incorrectly for those cases where range = 10..._2 and
5578 3*range is two bits longer than range.)
5581 *) Only add signing time to PKCS7 structures if it is not already
5585 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
5586 OBJ_ld_ce should be OBJ_id_ce.
5587 Also some ip-pda OIDs in crypto/objects/objects.txt were
5588 incorrect (cf. RFC 3039).
5589 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
5591 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
5592 returns early because it has nothing to do.
5593 [Andy Schneider <andy.schneider@bjss.co.uk>]
5595 *) [In 0.9.6c-engine release:]
5596 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
5597 [Andy Schneider <andy.schneider@bjss.co.uk>]
5599 *) [In 0.9.6c-engine release:]
5600 Add support for Cryptographic Appliance's keyserver technology.
5601 (Use engine 'keyclient')
5602 [Cryptographic Appliances and Geoff Thorpe]
5604 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
5605 is called via tools/c89.sh because arguments have to be
5606 rearranged (all '-L' options must appear before the first object
5608 [Richard Shapiro <rshapiro@abinitio.com>]
5610 *) [In 0.9.6c-engine release:]
5611 Add support for Broadcom crypto accelerator cards, backported
5613 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
5615 *) [In 0.9.6c-engine release:]
5616 Add support for SureWare crypto accelerator cards from
5617 Baltimore Technologies. (Use engine 'sureware')
5618 [Baltimore Technologies and Mark Cox]
5620 *) [In 0.9.6c-engine release:]
5621 Add support for crypto accelerator cards from Accelerated
5622 Encryption Processing, www.aep.ie. (Use engine 'aep')
5623 [AEP Inc. and Mark Cox]
5625 *) Add a configuration entry for gcc on UnixWare.
5626 [Gary Benson <gbenson@redhat.com>]
5628 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
5629 messages are stored in a single piece (fixed-length part and
5630 variable-length part combined) and fix various bugs found on the way.
5633 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
5634 instead. BIO_gethostbyname() does not know what timeouts are
5635 appropriate, so entries would stay in cache even when they have
5637 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
5639 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
5640 faced with a pathologically small ClientHello fragment that does
5641 not contain client_version: Instead of aborting with an error,
5642 simply choose the highest available protocol version (i.e.,
5643 TLS 1.0 unless it is disabled). In practice, ClientHello
5644 messages are never sent like this, but this change gives us
5645 strictly correct behaviour at least for TLS.
5648 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
5649 never resets s->method to s->ctx->method when called from within
5650 one of the SSL handshake functions.
5651 [Bodo Moeller; problem pointed out by Niko Baric]
5653 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
5654 (sent using the client's version number) if client_version is
5655 smaller than the protocol version in use. Also change
5656 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
5657 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
5658 the client will at least see that alert.
5661 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
5665 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
5666 client receives HelloRequest while in a handshake.
5667 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
5669 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
5670 should end in 'break', not 'goto end' which circuments various
5671 cleanups done in state SSL_ST_OK. But session related stuff
5672 must be disabled for SSL_ST_OK in the case that we just sent a
5675 Also avoid some overhead by not calling ssl_init_wbio_buffer()
5676 before just sending a HelloRequest.
5677 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
5679 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
5680 reveal whether illegal block cipher padding was found or a MAC
5681 verification error occured. (Neither SSLerr() codes nor alerts
5682 are directly visible to potential attackers, but the information
5683 may leak via logfiles.)
5685 Similar changes are not required for the SSL 2.0 implementation
5686 because the number of padding bytes is sent in clear for SSL 2.0,
5687 and the extra bytes are just ignored. However ssl/s2_pkt.c
5688 failed to verify that the purported number of padding bytes is in
5692 *) Add OpenUNIX-8 support including shared libraries
5693 (Boyd Lynn Gerber <gerberb@zenez.com>).
5696 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
5697 'wristwatch attack' using huge encoding parameters (cf.
5698 James H. Manger's CRYPTO 2001 paper). Note that the
5699 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
5700 encoding parameters and hence was not vulnerable.
5703 *) BN_sqr() bug fix.
5704 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
5706 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
5707 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
5708 followed by modular reduction.
5709 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
5711 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
5712 equivalent based on BN_pseudo_rand() instead of BN_rand().
5715 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
5716 This function was broken, as the check for a new client hello message
5717 to handle SGC did not allow these large messages.
5718 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
5721 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
5724 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
5725 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
5728 *) Rework the configuration and shared library support for Tru64 Unix.
5729 The configuration part makes use of modern compiler features and
5730 still retains old compiler behavior for those that run older versions
5731 of the OS. The shared library support part includes a variant that
5732 uses the RPATH feature, and is available through the special
5733 configuration target "alpha-cc-rpath", which will never be selected
5735 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
5737 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
5738 with the same message size as in ssl3_get_certificate_request().
5739 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
5740 messages might inadvertently be reject as too long.
5741 [Petr Lampa <lampa@fee.vutbr.cz>]
5743 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
5746 *) Modified SSL library such that the verify_callback that has been set
5747 specificly for an SSL object with SSL_set_verify() is actually being
5748 used. Before the change, a verify_callback set with this function was
5749 ignored and the verify_callback() set in the SSL_CTX at the time of
5750 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
5751 to allow the necessary settings.
5754 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
5755 explicitly to NULL, as at least on Solaris 8 this seems not always to be
5756 done automatically (in contradiction to the requirements of the C
5757 standard). This made problems when used from OpenSSH.
5760 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
5761 dh->length and always used
5763 BN_rand_range(priv_key, dh->p).
5765 BN_rand_range() is not necessary for Diffie-Hellman, and this
5766 specific range makes Diffie-Hellman unnecessarily inefficient if
5767 dh->length (recommended exponent length) is much smaller than the
5768 length of dh->p. We could use BN_rand_range() if the order of
5769 the subgroup was stored in the DH structure, but we only have
5774 BN_rand(priv_key, l, ...)
5776 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
5782 RSA_eay_public_encrypt
5783 RSA_eay_private_decrypt
5784 RSA_eay_private_encrypt (signing)
5785 RSA_eay_public_decrypt (signature verification)
5787 (default implementations for RSA_public_encrypt,
5788 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
5789 always reject numbers >= n.
5792 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
5793 to synchronize access to 'locking_thread'. This is necessary on
5794 systems where access to 'locking_thread' (an 'unsigned long'
5795 variable) is not atomic.
5798 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
5799 *before* setting the 'crypto_lock_rand' flag. The previous code had
5800 a race condition if 0 is a valid thread ID.
5801 [Travis Vitek <vitek@roguewave.com>]
5803 *) Add support for shared libraries under Irix.
5804 [Albert Chin-A-Young <china@thewrittenword.com>]
5806 *) Add configuration option to build on Linux on both big-endian and
5808 [Ralf Baechle <ralf@uni-koblenz.de>]
5810 *) Add the possibility to create shared libraries on HP-UX.
5813 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
5815 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
5816 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
5817 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
5818 PRNG state recovery was possible based on the output of
5819 one PRNG request appropriately sized to gain knowledge on
5820 'md' followed by enough consecutive 1-byte PRNG requests
5821 to traverse all of 'state'.
5823 1. When updating 'md_local' (the current thread's copy of 'md')
5824 during PRNG output generation, hash all of the previous
5825 'md_local' value, not just the half used for PRNG output.
5827 2. Make the number of bytes from 'state' included into the hash
5828 independent from the number of PRNG bytes requested.
5830 The first measure alone would be sufficient to avoid
5831 Markku-Juhani's attack. (Actually it had never occurred
5832 to me that the half of 'md_local' used for chaining was the
5833 half from which PRNG output bytes were taken -- I had always
5834 assumed that the secret half would be used.) The second
5835 measure makes sure that additional data from 'state' is never
5836 mixed into 'md_local' in small portions; this heuristically
5837 further strengthens the PRNG.
5840 *) Fix crypto/bn/asm/mips3.s.
5843 *) When only the key is given to "enc", the IV is undefined. Print out
5844 an error message in this case.
5847 *) Handle special case when X509_NAME is empty in X509 printing routines.
5850 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
5851 positive and less than q.
5854 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
5855 used: it isn't thread safe and the add_lock_callback should handle
5857 [Paul Rose <Paul.Rose@bridge.com>]
5859 *) Verify that incoming data obeys the block size in
5860 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
5864 [Ulf Möller, Bodo Möller]
5866 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
5867 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
5868 when fixing the server behaviour for backwards-compatible 'client
5869 hello' messages. (Note that the attack is impractical against
5870 SSL 3.0 and TLS 1.0 anyway because length and version checking
5871 means that the probability of guessing a valid ciphertext is
5872 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
5875 Before 0.9.5, the countermeasure (hide the error by generating a
5876 random 'decryption result') did not work properly because
5877 ERR_clear_error() was missing, meaning that SSL_get_error() would
5878 detect the supposedly ignored error.
5880 Both problems are now fixed.
5883 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
5884 (previously it was 1024).
5887 *) Fix for compatibility mode trust settings: ignore trust settings
5888 unless some valid trust or reject settings are present.
5891 *) Fix for blowfish EVP: its a variable length cipher.
5894 *) Fix various bugs related to DSA S/MIME verification. Handle missing
5895 parameters in DSA public key structures and return an error in the
5896 DSA routines if parameters are absent.
5899 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
5900 in the current directory if neither $RANDFILE nor $HOME was set.
5901 RAND_file_name() in 0.9.6a returned NULL in this case. This has
5902 caused some confusion to Windows users who haven't defined $HOME.
5903 Thus RAND_file_name() is changed again: e_os.h can define a
5904 DEFAULT_HOME, which will be used if $HOME is not set.
5905 For Windows, we use "C:"; on other platforms, we still require
5906 environment variables.
5908 *) Move 'if (!initialized) RAND_poll()' into regions protected by
5909 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
5910 having multiple threads call RAND_poll() concurrently.
5913 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
5914 combination of a flag and a thread ID variable.
5915 Otherwise while one thread is in ssleay_rand_bytes (which sets the
5916 flag), *other* threads can enter ssleay_add_bytes without obeying
5917 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
5918 that they do not hold after the first thread unsets add_do_not_lock).
5921 *) Change bctest again: '-x' expressions are not available in all
5925 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
5927 *) Fix a couple of memory leaks in PKCS7_dataDecode()
5928 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
5930 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
5931 the default extension for executables, if any. Also, make the perl
5932 scripts that use symlink() to test if it really exists and use "cp"
5933 if it doesn't. All this made OpenSSL compilable and installable in
5937 *) Fix for asn1_GetSequence() for indefinite length constructed data.
5938 If SEQUENCE is length is indefinite just set c->slen to the total
5939 amount of data available.
5940 [Steve Henson, reported by shige@FreeBSD.org]
5941 [This change does not apply to 0.9.7.]
5943 *) Change bctest to avoid here-documents inside command substitution
5944 (workaround for FreeBSD /bin/sh bug).
5945 For compatibility with Ultrix, avoid shell functions (introduced
5946 in the bctest version that searches along $PATH).
5949 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
5950 with des_encrypt() defined on some operating systems, like Solaris
5954 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
5955 On the Importance of Eliminating Errors in Cryptographic
5956 Computations, J. Cryptology 14 (2001) 2, 101-119,
5957 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
5960 *) MIPS assembler BIGNUM division bug fix.
5963 *) Disabled incorrect Alpha assembler code.
5966 *) Fix PKCS#7 decode routines so they correctly update the length
5967 after reading an EOC for the EXPLICIT tag.
5969 [This change does not apply to 0.9.7.]
5971 *) Fix bug in PKCS#12 key generation routines. This was triggered
5972 if a 3DES key was generated with a 0 initial byte. Include
5973 PKCS12_BROKEN_KEYGEN compilation option to retain the old
5974 (but broken) behaviour.
5977 *) Enhance bctest to search for a working bc along $PATH and print
5979 [Tim Rice <tim@multitalents.net> via Richard Levitte]
5981 *) Fix memory leaks in err.c: free err_data string if necessary;
5982 don't write to the wrong index in ERR_set_error_data.
5985 *) Implement ssl23_peek (analogous to ssl23_read), which previously
5989 *) Replace rdtsc with _emit statements for VC++ version 5.
5990 [Jeremy Cooper <jeremy@baymoo.org>]
5992 *) Make it possible to reuse SSLv2 sessions.
5995 *) In copy_email() check for >= 0 as a return value for
5996 X509_NAME_get_index_by_NID() since 0 is a valid index.
5997 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
5999 *) Avoid coredump with unsupported or invalid public keys by checking if
6000 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
6001 PKCS7_verify() fails with non detached data.
6004 *) Don't use getenv in library functions when run as setuid/setgid.
6005 New function OPENSSL_issetugid().
6008 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
6009 due to incorrect handling of multi-threading:
6011 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
6013 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
6015 3. Count how many times MemCheck_off() has been called so that
6016 nested use can be treated correctly. This also avoids
6017 inband-signalling in the previous code (which relied on the
6018 assumption that thread ID 0 is impossible).
6021 *) Add "-rand" option also to s_client and s_server.
6024 *) Fix CPU detection on Irix 6.x.
6025 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
6026 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6028 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
6031 [This change does not apply to 0.9.7.]
6033 *) Use the cached encoding of an X509_NAME structure rather than
6034 copying it. This is apparently the reason for the libsafe "errors"
6035 but the code is actually correct.
6038 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
6039 Bleichenbacher's DSA attack.
6040 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
6041 to be set and top=0 forces the highest bit to be set; top=-1 is new
6042 and leaves the highest bit random.
6043 [Ulf Moeller, Bodo Moeller]
6045 *) In the NCONF_...-based implementations for CONF_... queries
6046 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
6047 a temporary CONF structure with the data component set to NULL
6048 (which gives segmentation faults in lh_retrieve).
6049 Instead, use NULL for the CONF pointer in CONF_get_string and
6050 CONF_get_number (which may use environment variables) and directly
6051 return NULL from CONF_get_section.
6054 *) Fix potential buffer overrun for EBCDIC.
6057 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
6058 keyUsage if basicConstraints absent for a CA.
6061 *) Make SMIME_write_PKCS7() write mail header values with a format that
6062 is more generally accepted (no spaces before the semicolon), since
6063 some programs can't parse those values properly otherwise. Also make
6064 sure BIO's that break lines after each write do not create invalid
6068 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
6069 macros previously used would not encode an empty SEQUENCE OF
6070 and break the signature.
6072 [This change does not apply to 0.9.7.]
6074 *) Zero the premaster secret after deriving the master secret in
6078 *) Add some EVP_add_digest_alias registrations (as found in
6079 OpenSSL_add_all_digests()) to SSL_library_init()
6080 aka OpenSSL_add_ssl_algorithms(). This provides improved
6081 compatibility with peers using X.509 certificates
6082 with unconventional AlgorithmIdentifier OIDs.
6085 *) Fix for Irix with NO_ASM.
6086 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6088 *) ./config script fixes.
6089 [Ulf Moeller, Richard Levitte]
6091 *) Fix 'openssl passwd -1'.
6094 *) Change PKCS12_key_gen_asc() so it can cope with non null
6095 terminated strings whose length is passed in the passlen
6096 parameter, for example from PEM callbacks. This was done
6097 by adding an extra length parameter to asc2uni().
6098 [Steve Henson, reported by <oddissey@samsung.co.kr>]
6100 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
6101 call failed, free the DSA structure.
6104 *) Fix to uni2asc() to cope with zero length Unicode strings.
6105 These are present in some PKCS#12 files.
6108 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
6109 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
6110 when writing a 32767 byte record.
6111 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
6113 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
6114 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
6116 (RSA objects have a reference count access to which is protected
6117 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
6118 so they are meant to be shared between threads.)
6119 [Bodo Moeller, Geoff Thorpe; original patch submitted by
6120 "Reddie, Steven" <Steven.Reddie@ca.com>]
6122 *) Fix a deadlock in CRYPTO_mem_leaks().
6125 *) Use better test patterns in bntest.
6128 *) rand_win.c fix for Borland C.
6131 *) BN_rshift bugfix for n == 0.
6134 *) Add a 'bctest' script that checks for some known 'bc' bugs
6135 so that 'make test' does not abort just because 'bc' is broken.
6138 *) Store verify_result within SSL_SESSION also for client side to
6139 avoid potential security hole. (Re-used sessions on the client side
6140 always resulted in verify_result==X509_V_OK, not using the original
6141 result of the server certificate verification.)
6144 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
6145 SSL3_RT_APPLICATION_DATA, return 0.
6146 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
6150 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
6151 releases, have been re-implemented by renaming the previous
6152 implementations of ssl2_read and ssl3_read to ssl2_read_internal
6153 and ssl3_read_internal, respectively, and adding 'peek' parameters
6154 to them. The new ssl[23]_{read,peek} functions are calls to
6155 ssl[23]_read_internal with the 'peek' flag set appropriately.
6156 A 'peek' parameter has also been added to ssl3_read_bytes, which
6157 does the actual work for ssl3_read_internal.
6160 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
6161 the method-specific "init()" handler. Also clean up ex_data after
6162 calling the method-specific "finish()" handler. Previously, this was
6163 happening the other way round.
6166 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
6167 The previous value, 12, was not always sufficient for BN_mod_exp().
6170 *) Make sure that shared libraries get the internal name engine with
6171 the full version number and not just 0. This should mark the
6172 shared libraries as not backward compatible. Of course, this should
6173 be changed again when we can guarantee backward binary compatibility.
6176 *) Fix typo in get_cert_by_subject() in by_dir.c
6177 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
6179 *) Rework the system to generate shared libraries:
6181 - Make note of the expected extension for the shared libraries and
6182 if there is a need for symbolic links from for example libcrypto.so.0
6183 to libcrypto.so.0.9.7. There is extended info in Configure for
6186 - Make as few rebuilds of the shared libraries as possible.
6188 - Still avoid linking the OpenSSL programs with the shared libraries.
6190 - When installing, install the shared libraries separately from the
6194 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
6196 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
6197 and not in SSL_clear because the latter is also used by the
6198 accept/connect functions; previously, the settings made by
6199 SSL_set_read_ahead would be lost during the handshake.
6200 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
6202 *) Correct util/mkdef.pl to be selective about disabled algorithms.
6203 Previously, it would create entries for disableed algorithms no
6207 *) Added several new manual pages for SSL_* function.
6210 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
6212 *) In ssl23_get_client_hello, generate an error message when faced
6213 with an initial SSL 3.0/TLS record that is too small to contain the
6214 first two bytes of the ClientHello message, i.e. client_version.
6215 (Note that this is a pathologic case that probably has never happened
6216 in real life.) The previous approach was to use the version number
6217 from the record header as a substitute; but our protocol choice
6218 should not depend on that one because it is not authenticated
6219 by the Finished messages.
6222 *) More robust randomness gathering functions for Windows.
6223 [Jeffrey Altman <jaltman@columbia.edu>]
6225 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
6226 not set then we don't setup the error code for issuer check errors
6227 to avoid possibly overwriting other errors which the callback does
6228 handle. If an application does set the flag then we assume it knows
6229 what it is doing and can handle the new informational codes
6233 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
6234 a general "ANY" type, as such it should be able to decode anything
6235 including tagged types. However it didn't check the class so it would
6236 wrongly interpret tagged types in the same way as their universal
6237 counterpart and unknown types were just rejected. Changed so that the
6238 tagged and unknown types are handled in the same way as a SEQUENCE:
6239 that is the encoding is stored intact. There is also a new type
6240 "V_ASN1_OTHER" which is used when the class is not universal, in this
6241 case we have no idea what the actual type is so we just lump them all
6245 *) On VMS, stdout may very well lead to a file that is written to
6246 in a record-oriented fashion. That means that every write() will
6247 write a separate record, which will be read separately by the
6248 programs trying to read from it. This can be very confusing.
6250 The solution is to put a BIO filter in the way that will buffer
6251 text until a linefeed is reached, and then write everything a
6252 line at a time, so every record written will be an actual line,
6253 not chunks of lines and not (usually doesn't happen, but I've
6254 seen it once) several lines in one record. BIO_f_linebuffer() is
6257 Currently, it's a VMS-only method, because that's where it has
6258 been tested well enough.
6261 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
6262 it can return incorrect results.
6263 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
6264 but it was in 0.9.6-beta[12].)
6267 *) Disable the check for content being present when verifying detached
6268 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
6269 include zero length content when signing messages.
6272 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
6273 BIO_ctrl (for BIO pairs).
6276 *) Add DSO method for VMS.
6279 *) Bug fix: Montgomery multiplication could produce results with the
6283 *) Add RPM specification openssl.spec and modify it to build three
6284 packages. The default package contains applications, application
6285 documentation and run-time libraries. The devel package contains
6286 include files, static libraries and function documentation. The
6287 doc package contains the contents of the doc directory. The original
6288 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
6291 *) Add a large number of documentation files for many SSL routines.
6292 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
6294 *) Add a configuration entry for Sony News 4.
6295 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
6297 *) Don't set the two most significant bits to one when generating a
6298 random number < q in the DSA library.
6301 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
6302 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
6303 the underlying transport is blocking) if a handshake took place.
6304 (The default behaviour is needed by applications such as s_client
6305 and s_server that use select() to determine when to use SSL_read;
6306 but for applications that know in advance when to expect data, it
6307 just makes things more complicated.)
6310 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
6314 *) Add a few more EBCDIC conditionals that make `req' and `x509'
6315 work better on such systems.
6316 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6318 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
6319 Update PKCS12_parse() so it copies the friendlyName and the
6320 keyid to the certificates aux info.
6323 *) Fix bug in PKCS7_verify() which caused an infinite loop
6324 if there was more than one signature.
6325 [Sven Uszpelkat <su@celocom.de>]
6327 *) Major change in util/mkdef.pl to include extra information
6328 about each symbol, as well as presentig variables as well
6329 as functions. This change means that there's n more need
6330 to rebuild the .num files when some algorithms are excluded.
6333 *) Allow the verify time to be set by an application,
6334 rather than always using the current time.
6337 *) Phase 2 verify code reorganisation. The certificate
6338 verify code now looks up an issuer certificate by a
6339 number of criteria: subject name, authority key id
6340 and key usage. It also verifies self signed certificates
6341 by the same criteria. The main comparison function is
6342 X509_check_issued() which performs these checks.
6344 Lot of changes were necessary in order to support this
6345 without completely rewriting the lookup code.
6347 Authority and subject key identifier are now cached.
6349 The LHASH 'certs' is X509_STORE has now been replaced
6350 by a STACK_OF(X509_OBJECT). This is mainly because an
6351 LHASH can't store or retrieve multiple objects with
6352 the same hash value.
6354 As a result various functions (which were all internal
6355 use only) have changed to handle the new X509_STORE
6356 structure. This will break anything that messed round
6357 with X509_STORE internally.
6359 The functions X509_STORE_add_cert() now checks for an
6360 exact match, rather than just subject name.
6362 The X509_STORE API doesn't directly support the retrieval
6363 of multiple certificates matching a given criteria, however
6364 this can be worked round by performing a lookup first
6365 (which will fill the cache with candidate certificates)
6366 and then examining the cache for matches. This is probably
6367 the best we can do without throwing out X509_LOOKUP
6368 entirely (maybe later...).
6370 The X509_VERIFY_CTX structure has been enhanced considerably.
6372 All certificate lookup operations now go via a get_issuer()
6373 callback. Although this currently uses an X509_STORE it
6374 can be replaced by custom lookups. This is a simple way
6375 to bypass the X509_STORE hackery necessary to make this
6376 work and makes it possible to use more efficient techniques
6377 in future. A very simple version which uses a simple
6378 STACK for its trusted certificate store is also provided
6379 using X509_STORE_CTX_trusted_stack().
6381 The verify_cb() and verify() callbacks now have equivalents
6382 in the X509_STORE_CTX structure.
6384 X509_STORE_CTX also has a 'flags' field which can be used
6385 to customise the verify behaviour.
6388 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
6389 excludes S/MIME capabilities.
6392 *) When a certificate request is read in keep a copy of the
6393 original encoding of the signed data and use it when outputing
6394 again. Signatures then use the original encoding rather than
6395 a decoded, encoded version which may cause problems if the
6396 request is improperly encoded.
6399 *) For consistency with other BIO_puts implementations, call
6400 buffer_write(b, ...) directly in buffer_puts instead of calling
6403 In BIO_puts, increment b->num_write as in BIO_write.
6404 [Peter.Sylvester@EdelWeb.fr]
6406 *) Fix BN_mul_word for the case where the word is 0. (We have to use
6407 BN_zero, we may not return a BIGNUM with an array consisting of
6411 *) Avoid calling abort() from within the library when problems are
6412 detected, except if preprocessor symbols have been defined
6413 (such as REF_CHECK, BN_DEBUG etc.).
6416 *) New openssl application 'rsautl'. This utility can be
6417 used for low level RSA operations. DER public key
6418 BIO/fp routines also added.
6421 *) New Configure entry and patches for compiling on QNX 4.
6422 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
6424 *) A demo state-machine implementation was sponsored by
6425 Nuron (http://www.nuron.com/) and is now available in
6426 demos/state_machine.
6429 *) New options added to the 'dgst' utility for signature
6430 generation and verification.
6433 *) Unrecognized PKCS#7 content types are now handled via a
6434 catch all ASN1_TYPE structure. This allows unsupported
6435 types to be stored as a "blob" and an application can
6436 encode and decode it manually.
6439 *) Fix various signed/unsigned issues to make a_strex.c
6441 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
6443 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
6444 length if passed a buffer. ASN1_INTEGER_to_BN failed
6445 if passed a NULL BN and its argument was negative.
6446 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
6448 *) Modification to PKCS#7 encoding routines to output definite
6449 length encoding. Since currently the whole structures are in
6450 memory there's not real point in using indefinite length
6451 constructed encoding. However if OpenSSL is compiled with
6452 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
6455 *) Added BIO_vprintf() and BIO_vsnprintf().
6458 *) Added more prefixes to parse for in the the strings written
6459 through a logging bio, to cover all the levels that are available
6460 through syslog. The prefixes are now:
6462 PANIC, EMERG, EMR => LOG_EMERG
6463 ALERT, ALR => LOG_ALERT
6464 CRIT, CRI => LOG_CRIT
6465 ERROR, ERR => LOG_ERR
6466 WARNING, WARN, WAR => LOG_WARNING
6467 NOTICE, NOTE, NOT => LOG_NOTICE
6468 INFO, INF => LOG_INFO
6469 DEBUG, DBG => LOG_DEBUG
6471 and as before, if none of those prefixes are present at the
6472 beginning of the string, LOG_ERR is chosen.
6474 On Win32, the LOG_* levels are mapped according to this:
6476 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
6477 LOG_WARNING => EVENTLOG_WARNING_TYPE
6478 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
6482 *) Made it possible to reconfigure with just the configuration
6483 argument "reconf" or "reconfigure". The command line arguments
6484 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
6485 and are retrieved from there when reconfiguring.
6489 [Assar Westerlund <assar@sics.se>, Richard Levitte]
6491 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
6494 *) The obj_dat.pl script was messing up the sorting of object
6495 names. The reason was that it compared the quoted version
6496 of strings as a result "OCSP" > "OCSP Signing" because
6497 " > SPACE. Changed script to store unquoted versions of
6498 names and add quotes on output. It was also omitting some
6499 names from the lookup table if they were given a default
6500 value (that is if SN is missing it is given the same
6501 value as LN and vice versa), these are now added on the
6502 grounds that if an object has a name we should be able to
6503 look it up. Finally added warning output when duplicate
6504 short or long names are found.
6507 *) Changes needed for Tandem NSK.
6508 [Scott Uroff <scott@xypro.com>]
6510 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
6511 RSA_padding_check_SSLv23(), special padding was never detected
6512 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
6513 version rollback attacks was not effective.
6515 In s23_clnt.c, don't use special rollback-attack detection padding
6516 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
6517 client; similarly, in s23_srvr.c, don't do the rollback check if
6518 SSL 2.0 is the only protocol enabled in the server.
6521 *) Make it possible to get hexdumps of unprintable data with 'openssl
6522 asn1parse'. By implication, the functions ASN1_parse_dump() and
6523 BIO_dump_indent() are added.
6526 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
6527 these print out strings and name structures based on various
6528 flags including RFC2253 support and proper handling of
6529 multibyte characters. Added options to the 'x509' utility
6530 to allow the various flags to be set.
6533 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
6534 Also change the functions X509_cmp_current_time() and
6535 X509_gmtime_adj() work with an ASN1_TIME structure,
6536 this will enable certificates using GeneralizedTime in validity
6537 dates to be checked.
6540 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
6541 negative public key encodings) on by default,
6542 NO_NEG_PUBKEY_BUG can be set to disable it.
6545 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
6546 content octets. An i2c_ASN1_OBJECT is unnecessary because
6547 the encoding can be trivially obtained from the structure.
6550 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
6551 not read locks (CRYPTO_r_[un]lock).
6554 *) A first attempt at creating official support for shared
6555 libraries through configuration. I've kept it so the
6556 default is static libraries only, and the OpenSSL programs
6557 are always statically linked for now, but there are
6558 preparations for dynamic linking in place.
6559 This has been tested on Linux and Tru64.
6562 *) Randomness polling function for Win9x, as described in:
6563 Peter Gutmann, Software Generation of Practically Strong
6567 *) Fix so PRNG is seeded in req if using an already existing
6571 *) New options to smime application. -inform and -outform
6572 allow alternative formats for the S/MIME message including
6573 PEM and DER. The -content option allows the content to be
6574 specified separately. This should allow things like Netscape
6575 form signing output easier to verify.
6578 *) Fix the ASN1 encoding of tags using the 'long form'.
6581 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
6582 STRING types. These convert content octets to and from the
6583 underlying type. The actual tag and length octets are
6584 already assumed to have been read in and checked. These
6585 are needed because all other string types have virtually
6586 identical handling apart from the tag. By having versions
6587 of the ASN1 functions that just operate on content octets
6588 IMPLICIT tagging can be handled properly. It also allows
6589 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
6590 and ASN1_INTEGER are identical apart from the tag.
6593 *) Change the handling of OID objects as follows:
6595 - New object identifiers are inserted in objects.txt, following
6596 the syntax given in objects.README.
6597 - objects.pl is used to process obj_mac.num and create a new
6599 - obj_dat.pl is used to create a new obj_dat.h, using the data in
6602 This is currently kind of a hack, and the perl code in objects.pl
6603 isn't very elegant, but it works as I intended. The simplest way
6604 to check that it worked correctly is to look in obj_dat.h and
6605 check the array nid_objs and make sure the objects haven't moved
6606 around (this is important!). Additions are OK, as well as
6607 consistent name changes.
6610 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
6613 *) Addition of the command line parameter '-rand file' to 'openssl req'.
6614 The given file adds to whatever has already been seeded into the
6615 random pool through the RANDFILE configuration file option or
6616 environment variable, or the default random state file.
6619 *) mkstack.pl now sorts each macro group into lexical order.
6620 Previously the output order depended on the order the files
6621 appeared in the directory, resulting in needless rewriting
6625 *) Patches to make OpenSSL compile under Win32 again. Mostly
6626 work arounds for the VC++ problem that it treats func() as
6627 func(void). Also stripped out the parts of mkdef.pl that
6628 added extra typesafe functions: these no longer exist.
6631 *) Reorganisation of the stack code. The macros are now all
6632 collected in safestack.h . Each macro is defined in terms of
6633 a "stack macro" of the form SKM_<name>(type, a, b). The
6634 DEBUG_SAFESTACK is now handled in terms of function casts,
6635 this has the advantage of retaining type safety without the
6636 use of additional functions. If DEBUG_SAFESTACK is not defined
6637 then the non typesafe macros are used instead. Also modified the
6638 mkstack.pl script to handle the new form. Needs testing to see
6639 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
6640 the default if no major problems. Similar behaviour for ASN1_SET_OF
6641 and PKCS12_STACK_OF.
6644 *) When some versions of IIS use the 'NET' form of private key the
6645 key derivation algorithm is different. Normally MD5(password) is
6646 used as a 128 bit RC4 key. In the modified case
6647 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
6648 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
6649 as the old Netscape_RSA functions except they have an additional
6650 'sgckey' parameter which uses the modified algorithm. Also added
6651 an -sgckey command line option to the rsa utility. Thanks to
6652 Adrian Peck <bertie@ncipher.com> for posting details of the modified
6653 algorithm to openssl-dev.
6656 *) The evp_local.h macros were using 'c.##kname' which resulted in
6657 invalid expansion on some systems (SCO 5.0.5 for example).
6658 Corrected to 'c.kname'.
6659 [Phillip Porch <root@theporch.com>]
6661 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
6662 a STACK of email addresses from a certificate or request, these look
6663 in the subject name and the subject alternative name extensions and
6664 omit any duplicate addresses.
6667 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
6668 This makes DSA verification about 2 % faster.
6671 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
6672 (meaning that now 2^5 values will be precomputed, which is only 4 KB
6673 plus overhead for 1024 bit moduli).
6674 This makes exponentiations about 0.5 % faster for 1024 bit
6675 exponents (as measured by "openssl speed rsa2048").
6678 *) Rename memory handling macros to avoid conflicts with other
6680 Malloc => OPENSSL_malloc
6681 Malloc_locked => OPENSSL_malloc_locked
6682 Realloc => OPENSSL_realloc
6683 Free => OPENSSL_free
6686 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
6687 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
6690 *) CygWin32 support.
6691 [John Jarvie <jjarvie@newsguy.com>]
6693 *) The type-safe stack code has been rejigged. It is now only compiled
6694 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
6695 by default all type-specific stack functions are "#define"d back to
6696 standard stack functions. This results in more streamlined output
6697 but retains the type-safety checking possibilities of the original
6701 *) The STACK code has been cleaned up, and certain type declarations
6702 that didn't make a lot of sense have been brought in line. This has
6703 also involved a cleanup of sorts in safestack.h to more correctly
6704 map type-safe stack functions onto their plain stack counterparts.
6705 This work has also resulted in a variety of "const"ifications of
6706 lots of the code, especially "_cmp" operations which should normally
6707 be prototyped with "const" parameters anyway.
6710 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
6711 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
6712 (The PRNG state consists of two parts, the large pool 'state' and 'md',
6713 where all of 'md' is used each time the PRNG is used, but 'state'
6714 is used only indexed by a cyclic counter. As entropy may not be
6715 well distributed from the beginning, 'md' is important as a
6716 chaining variable. However, the output function chains only half
6717 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
6718 all of 'md', and seeding with STATE_SIZE dummy bytes will result
6719 in all of 'state' being rewritten, with the new values depending
6720 on virtually all of 'md'. This overcomes the 80 bit limitation.)
6723 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
6724 the handshake is continued after ssl_verify_cert_chain();
6725 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
6726 can lead to 'unexplainable' connection aborts later.
6727 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
6729 *) Major EVP API cipher revision.
6730 Add hooks for extra EVP features. This allows various cipher
6731 parameters to be set in the EVP interface. Support added for variable
6732 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
6733 setting of RC2 and RC5 parameters.
6735 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
6738 Remove lots of duplicated code from the EVP library. For example *every*
6739 cipher init() function handles the 'iv' in the same way according to the
6740 cipher mode. They also all do nothing if the 'key' parameter is NULL and
6741 for CFB and OFB modes they zero ctx->num.
6743 New functionality allows removal of S/MIME code RC2 hack.
6745 Most of the routines have the same form and so can be declared in terms
6748 By shifting this to the top level EVP_CipherInit() it can be removed from
6749 all individual ciphers. If the cipher wants to handle IVs or keys
6750 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
6753 Change lots of functions like EVP_EncryptUpdate() to now return a
6754 value: although software versions of the algorithms cannot fail
6755 any installed hardware versions can.
6758 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
6759 this option is set, tolerate broken clients that send the negotiated
6760 protocol version number instead of the requested protocol version
6764 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
6765 i.e. non-zero for export ciphersuites, zero otherwise.
6766 Previous versions had this flag inverted, inconsistent with
6767 rsa_tmp_cb (..._TMP_RSA_CB).
6768 [Bodo Moeller; problem reported by Amit Chopra]
6770 *) Add missing DSA library text string. Work around for some IIS
6771 key files with invalid SEQUENCE encoding.
6774 *) Add a document (doc/standards.txt) that list all kinds of standards
6775 and so on that are implemented in OpenSSL.
6778 *) Enhance c_rehash script. Old version would mishandle certificates
6779 with the same subject name hash and wouldn't handle CRLs at all.
6780 Added -fingerprint option to crl utility, to support new c_rehash
6784 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
6787 *) Fix for SSL server purpose checking. Server checking was
6788 rejecting certificates which had extended key usage present
6789 but no ssl client purpose.
6790 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
6792 *) Make PKCS#12 code work with no password. The PKCS#12 spec
6793 is a little unclear about how a blank password is handled.
6794 Since the password in encoded as a BMPString with terminating
6795 double NULL a zero length password would end up as just the
6796 double NULL. However no password at all is different and is
6797 handled differently in the PKCS#12 key generation code. NS
6798 treats a blank password as zero length. MSIE treats it as no
6799 password on export: but it will try both on import. We now do
6800 the same: PKCS12_parse() tries zero length and no password if
6801 the password is set to "" or NULL (NULL is now a valid password:
6802 it wasn't before) as does the pkcs12 application.
6805 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
6806 perror when PEM_read_bio_X509_REQ fails, the error message must
6807 be obtained from the error queue.
6810 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
6811 it in ERR_remove_state if appropriate, and change ERR_get_state
6812 accordingly to avoid race conditions (this is necessary because
6813 thread_hash is no longer constant once set).
6816 *) Bugfix for linux-elf makefile.one.
6819 *) RSA_get_default_method() will now cause a default
6820 RSA_METHOD to be chosen if one doesn't exist already.
6821 Previously this was only set during a call to RSA_new()
6822 or RSA_new_method(NULL) meaning it was possible for
6823 RSA_get_default_method() to return NULL.
6826 *) Added native name translation to the existing DSO code
6827 that will convert (if the flag to do so is set) filenames
6828 that are sufficiently small and have no path information
6829 into a canonical native form. Eg. "blah" converted to
6830 "libblah.so" or "blah.dll" etc.
6833 *) New function ERR_error_string_n(e, buf, len) which is like
6834 ERR_error_string(e, buf), but writes at most 'len' bytes
6835 including the 0 terminator. For ERR_error_string_n, 'buf'
6837 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
6839 *) CONF library reworked to become more general. A new CONF
6840 configuration file reader "class" is implemented as well as a
6841 new functions (NCONF_*, for "New CONF") to handle it. The now
6842 old CONF_* functions are still there, but are reimplemented to
6843 work in terms of the new functions. Also, a set of functions
6844 to handle the internal storage of the configuration data is
6845 provided to make it easier to write new configuration file
6846 reader "classes" (I can definitely see something reading a
6847 configuration file in XML format, for example), called _CONF_*,
6848 or "the configuration storage API"...
6850 The new configuration file reading functions are:
6852 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
6853 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
6855 NCONF_default, NCONF_WIN32
6857 NCONF_dump_fp, NCONF_dump_bio
6859 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
6860 NCONF_new creates a new CONF object. This works in the same way
6861 as other interfaces in OpenSSL, like the BIO interface.
6862 NCONF_dump_* dump the internal storage of the configuration file,
6863 which is useful for debugging. All other functions take the same
6864 arguments as the old CONF_* functions wth the exception of the
6865 first that must be a `CONF *' instead of a `LHASH *'.
6867 To make it easer to use the new classes with the old CONF_* functions,
6868 the function CONF_set_default_method is provided.
6871 *) Add '-tls1' option to 'openssl ciphers', which was already
6872 mentioned in the documentation but had not been implemented.
6873 (This option is not yet really useful because even the additional
6874 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
6877 *) Initial DSO code added into libcrypto for letting OpenSSL (and
6878 OpenSSL-based applications) load shared libraries and bind to
6879 them in a portable way.
6880 [Geoff Thorpe, with contributions from Richard Levitte]
6882 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
6884 *) Make sure _lrotl and _lrotr are only used with MSVC.
6886 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
6887 (the default implementation of RAND_status).
6889 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
6890 to '-clrext' (= clear extensions), as intended and documented.
6891 [Bodo Moeller; inconsistency pointed out by Michael Attili
6894 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
6895 was larger than the MD block size.
6896 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
6898 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
6899 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
6900 using the passed key: if the passed key was a private key the result
6901 of X509_print(), for example, would be to print out all the private key
6905 *) des_quad_cksum() byte order bug fix.
6906 [Ulf Möller, using the problem description in krb4-0.9.7, where
6907 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
6909 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
6911 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
6913 *) For easily testing in shell scripts whether some command
6914 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
6915 returns with exit code 0 iff no command of the given name is available.
6916 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
6917 the output goes to stdout and nothing is printed to stderr.
6918 Additional arguments are always ignored.
6920 Since for each cipher there is a command of the same name,
6921 the 'no-cipher' compilation switches can be tested this way.
6923 ('openssl no-XXX' is not able to detect pseudo-commands such
6924 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
6927 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
6930 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
6931 is set; it will be thrown away anyway because each handshake creates
6933 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
6934 to parameters -- in previous versions (since OpenSSL 0.9.3) the
6935 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
6936 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
6939 *) New s_client option -ign_eof: EOF at stdin is ignored, and
6940 'Q' and 'R' lose their special meanings (quit/renegotiate).
6941 This is part of what -quiet does; unlike -quiet, -ign_eof
6942 does not suppress any output.
6945 *) Add compatibility options to the purpose and trust code. The
6946 purpose X509_PURPOSE_ANY is "any purpose" which automatically
6947 accepts a certificate or CA, this was the previous behaviour,
6948 with all the associated security issues.
6950 X509_TRUST_COMPAT is the old trust behaviour: only and
6951 automatically trust self signed roots in certificate store. A
6952 new trust setting X509_TRUST_DEFAULT is used to specify that
6953 a purpose has no associated trust setting and it should instead
6954 use the value in the default purpose.
6957 *) Fix the PKCS#8 DSA private key code so it decodes keys again
6958 and fix a memory leak.
6961 *) In util/mkerr.pl (which implements 'make errors'), preserve
6962 reason strings from the previous version of the .c file, as
6963 the default to have only downcase letters (and digits) in
6964 automatically generated reasons codes is not always appropriate.
6967 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
6968 using strerror. Previously, ERR_reason_error_string() returned
6969 library names as reason strings for SYSerr; but SYSerr is a special
6970 case where small numbers are errno values, not library numbers.
6973 *) Add '-dsaparam' option to 'openssl dhparam' application. This
6974 converts DSA parameters into DH parameters. (When creating parameters,
6975 DSA_generate_parameters is used.)
6978 *) Include 'length' (recommended exponent length) in C code generated
6979 by 'openssl dhparam -C'.
6982 *) The second argument to set_label in perlasm was already being used
6983 so couldn't be used as a "file scope" flag. Moved to third argument
6987 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
6988 instead of RAND_bytes for encryption IVs and salts.
6991 *) Include RAND_status() into RAND_METHOD instead of implementing
6992 it only for md_rand.c Otherwise replacing the PRNG by calling
6993 RAND_set_rand_method would be impossible.
6996 *) Don't let DSA_generate_key() enter an infinite loop if the random
6997 number generation fails.
7000 *) New 'rand' application for creating pseudo-random output.
7003 *) Added configuration support for Linux/IA64
7004 [Rolf Haberrecker <rolf@suse.de>]
7006 *) Assembler module support for Mingw32.
7009 *) Shared library support for HPUX (in shlib/).
7010 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
7012 *) Shared library support for Solaris gcc.
7013 [Lutz Behnke <behnke@trustcenter.de>]
7015 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
7017 *) PKCS7_encrypt() was adding text MIME headers twice because they
7018 were added manually and by SMIME_crlf_copy().
7021 *) In bntest.c don't call BN_rand with zero bits argument.
7022 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
7024 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
7025 case was implemented. This caused BN_div_recp() to fail occasionally.
7028 *) Add an optional second argument to the set_label() in the perl
7029 assembly language builder. If this argument exists and is set
7030 to 1 it signals that the assembler should use a symbol whose
7031 scope is the entire file, not just the current function. This
7032 is needed with MASM which uses the format label:: for this scope.
7033 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
7035 *) Change the ASN1 types so they are typedefs by default. Before
7036 almost all types were #define'd to ASN1_STRING which was causing
7037 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
7041 *) Change names of new functions to the new get1/get0 naming
7042 convention: After 'get1', the caller owns a reference count
7043 and has to call ..._free; 'get0' returns a pointer to some
7044 data structure without incrementing reference counters.
7045 (Some of the existing 'get' functions increment a reference
7046 counter, some don't.)
7047 Similarly, 'set1' and 'add1' functions increase reference
7048 counters or duplicate objects.
7051 *) Allow for the possibility of temp RSA key generation failure:
7052 the code used to assume it always worked and crashed on failure.
7055 *) Fix potential buffer overrun problem in BIO_printf().
7056 [Ulf Möller, using public domain code by Patrick Powell; problem
7057 pointed out by David Sacerdote <das33@cornell.edu>]
7059 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
7060 RAND_egd() and RAND_status(). In the command line application,
7061 the EGD socket can be specified like a seed file using RANDFILE
7065 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
7066 Some CAs (e.g. Verisign) distribute certificates in this form.
7069 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
7070 list to exclude them. This means that no special compilation option
7071 is needed to use anonymous DH: it just needs to be included in the
7075 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
7076 EVP_MD_type. The old functionality is available in a new macro called
7077 EVP_MD_md(). Change code that uses it and update docs.
7080 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
7081 where the 'void *' argument is replaced by a function pointer argument.
7082 Previously 'void *' was abused to point to functions, which works on
7083 many platforms, but is not correct. As these functions are usually
7084 called by macros defined in OpenSSL header files, most source code
7085 should work without changes.
7088 *) <openssl/opensslconf.h> (which is created by Configure) now contains
7089 sections with information on -D... compiler switches used for
7090 compiling the library so that applications can see them. To enable
7091 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
7092 must be defined. E.g.,
7093 #define OPENSSL_ALGORITHM_DEFINES
7094 #include <openssl/opensslconf.h>
7095 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
7096 [Richard Levitte, Ulf and Bodo Möller]
7098 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
7102 *) Change the 'other' type in certificate aux info to a STACK_OF
7103 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
7104 the required ASN1 format: arbitrary types determined by an OID.
7107 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
7108 argument to 'req'. This is not because the function is newer or
7109 better than others it just uses the work 'NEW' in the certificate
7110 request header lines. Some software needs this.
7113 *) Reorganise password command line arguments: now passwords can be
7114 obtained from various sources. Delete the PEM_cb function and make
7115 it the default behaviour: i.e. if the callback is NULL and the
7116 usrdata argument is not NULL interpret it as a null terminated pass
7117 phrase. If usrdata and the callback are NULL then the pass phrase
7118 is prompted for as usual.
7121 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
7122 the support is automatically enabled. The resulting binaries will
7123 autodetect the card and use it if present.
7124 [Ben Laurie and Compaq Inc.]
7126 *) Work around for Netscape hang bug. This sends certificate request
7127 and server done in one record. Since this is perfectly legal in the
7128 SSL/TLS protocol it isn't a "bug" option and is on by default. See
7129 the bugs/SSLv3 entry for more info.
7132 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
7135 *) Add -rand argument to smime and pkcs12 applications and read/write
7139 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
7142 *) Add command line password options to the remaining applications.
7145 *) Bug fix for BN_div_recp() for numerators with an even number of
7149 *) More tests in bntest.c, and changed test_bn output.
7152 *) ./config recognizes MacOS X now.
7155 *) Bug fix for BN_div() when the first words of num and divsor are
7156 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
7159 *) Add support for various broken PKCS#8 formats, and command line
7160 options to produce them.
7163 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
7164 get temporary BIGNUMs from a BN_CTX.
7167 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
7171 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
7172 include a #define from the old name to the new. The original intent
7173 was that statically linked binaries could for example just call
7174 SSLeay_add_all_ciphers() to just add ciphers to the table and not
7175 link with digests. This never worked becayse SSLeay_add_all_digests()
7176 and SSLeay_add_all_ciphers() were in the same source file so calling
7177 one would link with the other. They are now in separate source files.
7180 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
7183 *) Use a less unusual form of the Miller-Rabin primality test (it used
7184 a binary algorithm for exponentiation integrated into the Miller-Rabin
7185 loop, our standard modexp algorithms are faster).
7188 *) Support for the EBCDIC character set completed.
7189 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
7191 *) Source code cleanups: use const where appropriate, eliminate casts,
7192 use void * instead of char * in lhash.
7195 *) Bugfix: ssl3_send_server_key_exchange was not restartable
7196 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
7197 this the server could overwrite ephemeral keys that the client
7201 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
7202 using 50 iterations of the Rabin-Miller test.
7204 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
7205 iterations of the Rabin-Miller test as required by the appendix
7206 to FIPS PUB 186[-1]) instead of DSA_is_prime.
7207 As BN_is_prime_fasttest includes trial division, DSA parameter
7208 generation becomes much faster.
7210 This implies a change for the callback functions in DSA_is_prime
7211 and DSA_generate_parameters: The callback function is called once
7212 for each positive witness in the Rabin-Miller test, not just
7213 occasionally in the inner loop; and the parameters to the
7214 callback function now provide an iteration count for the outer
7215 loop rather than for the current invocation of the inner loop.
7216 DSA_generate_parameters additionally can call the callback
7217 function with an 'iteration count' of -1, meaning that a
7218 candidate has passed the trial division test (when q is generated
7219 from an application-provided seed, trial division is skipped).
7222 *) New function BN_is_prime_fasttest that optionally does trial
7223 division before starting the Rabin-Miller test and has
7224 an additional BN_CTX * argument (whereas BN_is_prime always
7225 has to allocate at least one BN_CTX).
7226 'callback(1, -1, cb_arg)' is called when a number has passed the
7227 trial division stage.
7230 *) Fix for bug in CRL encoding. The validity dates weren't being handled
7234 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
7237 *) New function BN_pseudo_rand().
7240 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
7241 bignum version of BN_from_montgomery() with the working code from
7242 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
7246 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
7247 made it impossible to use the same SSL_SESSION data structure in
7248 SSL2 clients in multiple threads.
7251 *) The return value of RAND_load_file() no longer counts bytes obtained
7252 by stat(). RAND_load_file(..., -1) is new and uses the complete file
7253 to seed the PRNG (previously an explicit byte count was required).
7254 [Ulf Möller, Bodo Möller]
7256 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
7257 used (char *) instead of (void *) and had casts all over the place.
7260 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
7263 *) Retain source code compatibility for BN_prime_checks macro:
7264 BN_is_prime(..., BN_prime_checks, ...) now uses
7265 BN_prime_checks_for_size to determine the appropriate number of
7266 Rabin-Miller iterations.
7269 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
7270 DH_CHECK_P_NOT_SAFE_PRIME.
7271 (Check if this is true? OpenPGP calls them "strong".)
7274 *) Merge the functionality of "dh" and "gendh" programs into a new program
7275 "dhparam". The old programs are retained for now but will handle DH keys
7276 (instead of parameters) in future.
7279 *) Make the ciphers, s_server and s_client programs check the return values
7280 when a new cipher list is set.
7283 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
7284 ciphers. Before when the 56bit ciphers were enabled the sorting was
7287 The syntax for the cipher sorting has been extended to support sorting by
7288 cipher-strength (using the strength_bits hard coded in the tables).
7289 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
7291 Fix a bug in the cipher-command parser: when supplying a cipher command
7292 string with an "undefined" symbol (neither command nor alphanumeric
7293 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
7294 an error is flagged.
7296 Due to the strength-sorting extension, the code of the
7297 ssl_create_cipher_list() function was completely rearranged. I hope that
7298 the readability was also increased :-)
7299 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
7301 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
7302 for the first serial number and places 2 in the serial number file. This
7303 avoids problems when the root CA is created with serial number zero and
7304 the first user certificate has the same issuer name and serial number
7308 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
7309 the new code. Add documentation for this stuff.
7312 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
7313 X509_*() to X509at_*() on the grounds that they don't handle X509
7314 structures and behave in an analagous way to the X509v3 functions:
7315 they shouldn't be called directly but wrapper functions should be used
7318 So we also now have some wrapper functions that call the X509at functions
7319 when passed certificate requests. (TO DO: similar things can be done with
7320 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
7321 things. Some of these need some d2i or i2d and print functionality
7322 because they handle more complex structures.)
7325 *) Add missing #ifndefs that caused missing symbols when building libssl
7326 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
7327 NO_RSA in ssl/s2*.c.
7328 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
7330 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
7331 has a return value which indicates the quality of the random data
7332 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
7333 error queue. New function RAND_pseudo_bytes() generates output that is
7334 guaranteed to be unique but not unpredictable. RAND_add is like
7335 RAND_seed, but takes an extra argument for an entropy estimate
7336 (RAND_seed always assumes full entropy).
7339 *) Do more iterations of Rabin-Miller probable prime test (specifically,
7340 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
7341 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
7342 in crypto/bn/bn_prime.c for the complete table). This guarantees a
7343 false-positive rate of at most 2^-80 for random input.
7346 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
7349 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
7350 in the 0.9.5 release), this returns the chain
7351 from an X509_CTX structure with a dup of the stack and all
7352 the X509 reference counts upped: so the stack will exist
7353 after X509_CTX_cleanup() has been called. Modify pkcs12.c
7356 Also make SSL_SESSION_print() print out the verify return
7360 *) Add manpage for the pkcs12 command. Also change the default
7361 behaviour so MAC iteration counts are used unless the new
7362 -nomaciter option is used. This improves file security and
7363 only older versions of MSIE (4.0 for example) need it.
7366 *) Honor the no-xxx Configure options when creating .DEF files.
7369 *) Add PKCS#10 attributes to field table: challengePassword,
7370 unstructuredName and unstructuredAddress. These are taken from
7371 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
7372 international characters are used.
7374 More changes to X509_ATTRIBUTE code: allow the setting of types
7375 based on strings. Remove the 'loc' parameter when adding
7376 attributes because these will be a SET OF encoding which is sorted
7380 *) Initial changes to the 'req' utility to allow request generation
7381 automation. This will allow an application to just generate a template
7382 file containing all the field values and have req construct the
7385 Initial support for X509_ATTRIBUTE handling. Stacks of these are
7386 used all over the place including certificate requests and PKCS#7
7387 structures. They are currently handled manually where necessary with
7388 some primitive wrappers for PKCS#7. The new functions behave in a
7389 manner analogous to the X509 extension functions: they allow
7390 attributes to be looked up by NID and added.
7392 Later something similar to the X509V3 code would be desirable to
7393 automatically handle the encoding, decoding and printing of the
7394 more complex types. The string types like challengePassword can
7395 be handled by the string table functions.
7397 Also modified the multi byte string table handling. Now there is
7398 a 'global mask' which masks out certain types. The table itself
7399 can use the flag STABLE_NO_MASK to ignore the mask setting: this
7400 is useful when for example there is only one permissible type
7401 (as in countryName) and using the mask might result in no valid
7405 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
7406 SSL_get_peer_finished to allow applications to obtain the latest
7407 Finished messages sent to the peer or expected from the peer,
7408 respectively. (SSL_get_peer_finished is usually the Finished message
7409 actually received from the peer, otherwise the protocol will be aborted.)
7411 As the Finished message are message digests of the complete handshake
7412 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
7413 be used for external authentication procedures when the authentication
7414 provided by SSL/TLS is not desired or is not enough.
7417 *) Enhanced support for Alpha Linux is added. Now ./config checks if
7418 the host supports BWX extension and if Compaq C is present on the
7419 $PATH. Just exploiting of the BWX extension results in 20-30%
7420 performance kick for some algorithms, e.g. DES and RC4 to mention
7421 a couple. Compaq C in turn generates ~20% faster code for MD5 and
7425 *) Add support for MS "fast SGC". This is arguably a violation of the
7426 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
7427 weak crypto and after checking the certificate is SGC a second one
7428 with strong crypto. MS SGC stops the first handshake after receiving
7429 the server certificate message and sends a second client hello. Since
7430 a server will typically do all the time consuming operations before
7431 expecting any further messages from the client (server key exchange
7432 is the most expensive) there is little difference between the two.
7434 To get OpenSSL to support MS SGC we have to permit a second client
7435 hello message after we have sent server done. In addition we have to
7436 reset the MAC if we do get this second client hello.
7439 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
7440 if a DER encoded private key is RSA or DSA traditional format. Changed
7441 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
7442 format DER encoded private key. Newer code should use PKCS#8 format which
7443 has the key type encoded in the ASN1 structure. Added DER private key
7444 support to pkcs8 application.
7447 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
7448 ciphersuites has been selected (as required by the SSL 3/TLS 1
7449 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
7450 is set, we interpret this as a request to violate the specification
7451 (the worst that can happen is a handshake failure, and 'correct'
7452 behaviour would result in a handshake failure anyway).
7455 *) In SSL_CTX_add_session, take into account that there might be multiple
7456 SSL_SESSION structures with the same session ID (e.g. when two threads
7457 concurrently obtain them from an external cache).
7458 The internal cache can handle only one SSL_SESSION with a given ID,
7459 so if there's a conflict, we now throw out the old one to achieve
7463 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
7464 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
7465 some routines that use cipher OIDs: some ciphers do not have OIDs
7466 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
7470 *) Simplify the trust setting structure and code. Now we just have
7471 two sequences of OIDs for trusted and rejected settings. These will
7472 typically have values the same as the extended key usage extension
7473 and any application specific purposes.
7475 The trust checking code now has a default behaviour: it will just
7476 check for an object with the same NID as the passed id. Functions can
7477 be provided to override either the default behaviour or the behaviour
7478 for a given id. SSL client, server and email already have functions
7479 in place for compatibility: they check the NID and also return "trusted"
7480 if the certificate is self signed.
7483 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
7484 traditional format into an EVP_PKEY structure.
7487 *) Add a password callback function PEM_cb() which either prompts for
7488 a password if usr_data is NULL or otherwise assumes it is a null
7489 terminated password. Allow passwords to be passed on command line
7490 environment or config files in a few more utilities.
7493 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
7494 keys. Add some short names for PKCS#8 PBE algorithms and allow them
7495 to be specified on the command line for the pkcs8 and pkcs12 utilities.
7496 Update documentation.
7499 *) Support for ASN1 "NULL" type. This could be handled before by using
7500 ASN1_TYPE but there wasn't any function that would try to read a NULL
7501 and produce an error if it couldn't. For compatibility we also have
7502 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
7503 don't allocate anything because they don't need to.
7506 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
7508 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
7510 *) Rebuild of the memory allocation routines used by OpenSSL code and
7511 possibly others as well. The purpose is to make an interface that
7512 provide hooks so anyone can build a separate set of allocation and
7513 deallocation routines to be used by OpenSSL, for example memory
7514 pool implementations, or something else, which was previously hard
7515 since Malloc(), Realloc() and Free() were defined as macros having
7516 the values malloc, realloc and free, respectively (except for Win32
7517 compilations). The same is provided for memory debugging code.
7518 OpenSSL already comes with functionality to find memory leaks, but
7519 this gives people a chance to debug other memory problems.
7521 With these changes, a new set of functions and macros have appeared:
7523 CRYPTO_set_mem_debug_functions() [F]
7524 CRYPTO_get_mem_debug_functions() [F]
7525 CRYPTO_dbg_set_options() [F]
7526 CRYPTO_dbg_get_options() [F]
7527 CRYPTO_malloc_debug_init() [M]
7529 The memory debug functions are NULL by default, unless the library
7530 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
7531 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
7532 gives the standard debugging functions that come with OpenSSL) or
7533 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
7534 provided by the library user) must be used. When the standard
7535 debugging functions are used, CRYPTO_dbg_set_options can be used to
7536 request additional information:
7537 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
7538 the CRYPTO_MDEBUG_xxx macro when compiling the library.
7540 Also, things like CRYPTO_set_mem_functions will always give the
7541 expected result (the new set of functions is used for allocation
7542 and deallocation) at all times, regardless of platform and compiler
7545 To finish it up, some functions that were never use in any other
7546 way than through macros have a new API and new semantic:
7549 CRYPTO_dbg_realloc()
7552 All macros of value have retained their old syntax.
7553 [Richard Levitte and Bodo Moeller]
7555 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
7556 ordering of SMIMECapabilities wasn't in "strength order" and there
7557 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
7561 *) Some ASN1 types with illegal zero length encoding (INTEGER,
7562 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
7563 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
7565 *) Merge in my S/MIME library for OpenSSL. This provides a simple
7566 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
7567 functionality to handle multipart/signed properly) and a utility
7568 called 'smime' to call all this stuff. This is based on code I
7569 originally wrote for Celo who have kindly allowed it to be
7570 included in OpenSSL.
7573 *) Add variants des_set_key_checked and des_set_key_unchecked of
7574 des_set_key (aka des_key_sched). Global variable des_check_key
7575 decides which of these is called by des_set_key; this way
7576 des_check_key behaves as it always did, but applications and
7577 the library itself, which was buggy for des_check_key == 1,
7578 have a cleaner way to pick the version they need.
7581 *) New function PKCS12_newpass() which changes the password of a
7585 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
7586 dynamic mix. In both cases the ids can be used as an index into the
7587 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
7588 functions so they accept a list of the field values and the
7589 application doesn't need to directly manipulate the X509_TRUST
7593 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
7597 *) Modify the way the V3 extension code looks up extensions. This now
7598 works in a similar way to the object code: we have some "standard"
7599 extensions in a static table which is searched with OBJ_bsearch()
7600 and the application can add dynamic ones if needed. The file
7601 crypto/x509v3/ext_dat.h now has the info: this file needs to be
7602 updated whenever a new extension is added to the core code and kept
7603 in ext_nid order. There is a simple program 'tabtest.c' which checks
7604 this. New extensions are not added too often so this file can readily
7605 be maintained manually.
7607 There are two big advantages in doing things this way. The extensions
7608 can be looked up immediately and no longer need to be "added" using
7609 X509V3_add_standard_extensions(): this function now does nothing.
7610 [Side note: I get *lots* of email saying the extension code doesn't
7611 work because people forget to call this function]
7612 Also no dynamic allocation is done unless new extensions are added:
7613 so if we don't add custom extensions there is no need to call
7614 X509V3_EXT_cleanup().
7617 *) Modify enc utility's salting as follows: make salting the default. Add a
7618 magic header, so unsalted files fail gracefully instead of just decrypting
7619 to garbage. This is because not salting is a big security hole, so people
7620 should be discouraged from doing it.
7623 *) Fixes and enhancements to the 'x509' utility. It allowed a message
7624 digest to be passed on the command line but it only used this
7625 parameter when signing a certificate. Modified so all relevant
7626 operations are affected by the digest parameter including the
7627 -fingerprint and -x509toreq options. Also -x509toreq choked if a
7628 DSA key was used because it didn't fix the digest.
7631 *) Initial certificate chain verify code. Currently tests the untrusted
7632 certificates for consistency with the verify purpose (which is set
7633 when the X509_STORE_CTX structure is set up) and checks the pathlength.
7635 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
7636 this is because it will reject chains with invalid extensions whereas
7637 every previous version of OpenSSL and SSLeay made no checks at all.
7639 Trust code: checks the root CA for the relevant trust settings. Trust
7640 settings have an initial value consistent with the verify purpose: e.g.
7641 if the verify purpose is for SSL client use it expects the CA to be
7642 trusted for SSL client use. However the default value can be changed to
7643 permit custom trust settings: one example of this would be to only trust
7644 certificates from a specific "secure" set of CAs.
7646 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
7647 which should be used for version portability: especially since the
7648 verify structure is likely to change more often now.
7650 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
7651 to set them. If not set then assume SSL clients will verify SSL servers
7654 Two new options to the verify program: -untrusted allows a set of
7655 untrusted certificates to be passed in and -purpose which sets the
7656 intended purpose of the certificate. If a purpose is set then the
7657 new chain verify code is used to check extension consistency.
7660 *) Support for the authority information access extension.
7663 *) Modify RSA and DSA PEM read routines to transparently handle
7664 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
7665 public keys in a format compatible with certificate
7666 SubjectPublicKeyInfo structures. Unfortunately there were already
7667 functions called *_PublicKey_* which used various odd formats so
7668 these are retained for compatibility: however the DSA variants were
7669 never in a public release so they have been deleted. Changed dsa/rsa
7670 utilities to handle the new format: note no releases ever handled public
7671 keys so we should be OK.
7673 The primary motivation for this change is to avoid the same fiasco
7674 that dogs private keys: there are several incompatible private key
7675 formats some of which are standard and some OpenSSL specific and
7676 require various evil hacks to allow partial transparent handling and
7677 even then it doesn't work with DER formats. Given the option anything
7678 other than PKCS#8 should be dumped: but the other formats have to
7679 stay in the name of compatibility.
7681 With public keys and the benefit of hindsight one standard format
7682 is used which works with EVP_PKEY, RSA or DSA structures: though
7683 it clearly returns an error if you try to read the wrong kind of key.
7685 Added a -pubkey option to the 'x509' utility to output the public key.
7686 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
7687 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
7688 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
7689 that do the same as the EVP_PKEY_assign_*() except they up the
7690 reference count of the added key (they don't "swallow" the
7694 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
7695 CRLs would fail if the file contained no certificates or no CRLs:
7696 added a new function to read in both types and return the number
7697 read: this means that if none are read it will be an error. The
7698 DER versions of the certificate and CRL reader would always fail
7699 because it isn't possible to mix certificates and CRLs in DER format
7700 without choking one or the other routine. Changed this to just read
7701 a certificate: this is the best we can do. Also modified the code
7702 in apps/verify.c to take notice of return codes: it was previously
7703 attempting to read in certificates from NULL pointers and ignoring
7704 any errors: this is one reason why the cert and CRL reader seemed
7705 to work. It doesn't check return codes from the default certificate
7706 routines: these may well fail if the certificates aren't installed.
7709 *) Code to support otherName option in GeneralName.
7712 *) First update to verify code. Change the verify utility
7713 so it warns if it is passed a self signed certificate:
7714 for consistency with the normal behaviour. X509_verify
7715 has been modified to it will now verify a self signed
7716 certificate if *exactly* the same certificate appears
7717 in the store: it was previously impossible to trust a
7718 single self signed certificate. This means that:
7719 openssl verify ss.pem
7720 now gives a warning about a self signed certificate but
7721 openssl verify -CAfile ss.pem ss.pem
7725 *) For servers, store verify_result in SSL_SESSION data structure
7726 (and add it to external session representation).
7727 This is needed when client certificate verifications fails,
7728 but an application-provided verification callback (set by
7729 SSL_CTX_set_cert_verify_callback) allows accepting the session
7730 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
7731 but returns 1): When the session is reused, we have to set
7732 ssl->verify_result to the appropriate error code to avoid
7734 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
7736 *) Fix a bug in the new PKCS#7 code: it didn't consider the
7737 case in PKCS7_dataInit() where the signed PKCS7 structure
7738 didn't contain any existing data because it was being created.
7739 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
7741 *) Add a salt to the key derivation routines in enc.c. This
7742 forms the first 8 bytes of the encrypted file. Also add a
7743 -S option to allow a salt to be input on the command line.
7746 *) New function X509_cmp(). Oddly enough there wasn't a function
7747 to compare two certificates. We do this by working out the SHA1
7748 hash and comparing that. X509_cmp() will be needed by the trust
7752 *) SSL_get1_session() is like SSL_get_session(), but increments
7753 the reference count in the SSL_SESSION returned.
7754 [Geoff Thorpe <geoff@eu.c2.net>]
7756 *) Fix for 'req': it was adding a null to request attributes.
7757 Also change the X509_LOOKUP and X509_INFO code to handle
7758 certificate auxiliary information.
7761 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
7765 *) Add the possibility to add extra information to the memory leak
7766 detecting output, to form tracebacks, showing from where each
7767 allocation was originated: CRYPTO_push_info("constant string") adds
7768 the string plus current file name and line number to a per-thread
7769 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
7770 is like calling CYRPTO_pop_info() until the stack is empty.
7771 Also updated memory leak detection code to be multi-thread-safe.
7774 *) Add options -text and -noout to pkcs7 utility and delete the
7775 encryption options which never did anything. Update docs.
7778 *) Add options to some of the utilities to allow the pass phrase
7779 to be included on either the command line (not recommended on
7780 OSes like Unix) or read from the environment. Update the
7781 manpages and fix a few bugs.
7784 *) Add a few manpages for some of the openssl commands.
7787 *) Fix the -revoke option in ca. It was freeing up memory twice,
7788 leaking and not finding already revoked certificates.
7791 *) Extensive changes to support certificate auxiliary information.
7792 This involves the use of X509_CERT_AUX structure and X509_AUX
7793 functions. An X509_AUX function such as PEM_read_X509_AUX()
7794 can still read in a certificate file in the usual way but it
7795 will also read in any additional "auxiliary information". By
7796 doing things this way a fair degree of compatibility can be
7797 retained: existing certificates can have this information added
7798 using the new 'x509' options.
7800 Current auxiliary information includes an "alias" and some trust
7801 settings. The trust settings will ultimately be used in enhanced
7802 certificate chain verification routines: currently a certificate
7803 can only be trusted if it is self signed and then it is trusted
7807 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
7808 The problem was that one of the replacement routines had not been working
7809 since SSLeay releases. For now the offending routine has been replaced
7810 with non-optimised assembler. Even so, this now gives around 95%
7811 performance improvement for 1024 bit RSA signs.
7814 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
7815 handling. Most clients have the effective key size in bits equal to
7816 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
7817 A few however don't do this and instead use the size of the decrypted key
7818 to determine the RC2 key length and the AlgorithmIdentifier to determine
7819 the effective key length. In this case the effective key length can still
7820 be 40 bits but the key length can be 168 bits for example. This is fixed
7821 by manually forcing an RC2 key into the EVP_PKEY structure because the
7822 EVP code can't currently handle unusual RC2 key sizes: it always assumes
7823 the key length and effective key length are equal.
7826 *) Add a bunch of functions that should simplify the creation of
7827 X509_NAME structures. Now you should be able to do:
7828 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
7829 and have it automatically work out the correct field type and fill in
7830 the structures. The more adventurous can try:
7831 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
7832 and it will (hopefully) work out the correct multibyte encoding.
7835 *) Change the 'req' utility to use the new field handling and multibyte
7836 copy routines. Before the DN field creation was handled in an ad hoc
7837 way in req, ca, and x509 which was rather broken and didn't support
7838 BMPStrings or UTF8Strings. Since some software doesn't implement
7839 BMPStrings or UTF8Strings yet, they can be enabled using the config file
7840 using the dirstring_type option. See the new comment in the default
7841 openssl.cnf for more info.
7844 *) Make crypto/rand/md_rand.c more robust:
7845 - Assure unique random numbers after fork().
7846 - Make sure that concurrent threads access the global counter and
7847 md serializably so that we never lose entropy in them
7848 or use exactly the same state in multiple threads.
7849 Access to the large state is not always serializable because
7850 the additional locking could be a performance killer, and
7851 md should be large enough anyway.
7854 *) New file apps/app_rand.c with commonly needed functionality
7855 for handling the random seed file.
7857 Use the random seed file in some applications that previously did not:
7859 dsaparam -genkey (which also ignored its '-rand' option),
7862 x509 (when signing).
7863 Except on systems with /dev/urandom, it is crucial to have a random
7864 seed file at least for key creation, DSA signing, and for DH exchanges;
7865 for RSA signatures we could do without one.
7867 gendh and gendsa (unlike genrsa) used to read only the first byte
7868 of each file listed in the '-rand' option. The function as previously
7869 found in genrsa is now in app_rand.c and is used by all programs
7870 that support '-rand'.
7873 *) In RAND_write_file, use mode 0600 for creating files;
7874 don't just chmod when it may be too late.
7877 *) Report an error from X509_STORE_load_locations
7878 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
7881 *) New function ASN1_mbstring_copy() this copies a string in either
7882 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
7883 into an ASN1_STRING type. A mask of permissible types is passed
7884 and it chooses the "minimal" type to use or an error if not type
7888 *) Add function equivalents to the various macros in asn1.h. The old
7889 macros are retained with an M_ prefix. Code inside the library can
7890 use the M_ macros. External code (including the openssl utility)
7891 should *NOT* in order to be "shared library friendly".
7894 *) Add various functions that can check a certificate's extensions
7895 to see if it usable for various purposes such as SSL client,
7896 server or S/MIME and CAs of these types. This is currently
7897 VERY EXPERIMENTAL but will ultimately be used for certificate chain
7898 verification. Also added a -purpose flag to x509 utility to
7899 print out all the purposes.
7902 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
7906 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
7907 for, obtain and decode and extension and obtain its critical flag.
7908 This allows all the necessary extension code to be handled in a
7909 single function call.
7912 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
7913 platforms. See crypto/rc4/rc4_enc.c for further details.
7916 *) New -noout option to asn1parse. This causes no output to be produced
7917 its main use is when combined with -strparse and -out to extract data
7918 from a file (which may not be in ASN.1 format).
7921 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
7922 when producing the local key id.
7923 [Richard Levitte <levitte@stacken.kth.se>]
7925 *) New option -dhparam in s_server. This allows a DH parameter file to be
7926 stated explicitly. If it is not stated then it tries the first server
7927 certificate file. The previous behaviour hard coded the filename
7931 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
7932 a public key to be input or output. For example:
7933 openssl rsa -in key.pem -pubout -out pubkey.pem
7934 Also added necessary DSA public key functions to handle this.
7937 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
7938 in the message. This was handled by allowing
7939 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
7940 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
7942 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
7943 to the end of the strings whereas this didn't. This would cause problems
7944 if strings read with d2i_ASN1_bytes() were later modified.
7945 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
7947 *) Fix for base64 decode bug. When a base64 bio reads only one line of
7948 data and it contains EOF it will end up returning an error. This is
7949 caused by input 46 bytes long. The cause is due to the way base64
7950 BIOs find the start of base64 encoded data. They do this by trying a
7951 trial decode on each line until they find one that works. When they
7952 do a flag is set and it starts again knowing it can pass all the
7953 data directly through the decoder. Unfortunately it doesn't reset
7954 the context it uses. This means that if EOF is reached an attempt
7955 is made to pass two EOFs through the context and this causes the
7956 resulting error. This can also cause other problems as well. As is
7957 usual with these problems it takes *ages* to find and the fix is
7958 trivial: move one line.
7959 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
7961 *) Ugly workaround to get s_client and s_server working under Windows. The
7962 old code wouldn't work because it needed to select() on sockets and the
7963 tty (for keypresses and to see if data could be written). Win32 only
7964 supports select() on sockets so we select() with a 1s timeout on the
7965 sockets and then see if any characters are waiting to be read, if none
7966 are present then we retry, we also assume we can always write data to
7967 the tty. This isn't nice because the code then blocks until we've
7968 received a complete line of data and it is effectively polling the
7969 keyboard at 1s intervals: however it's quite a bit better than not
7970 working at all :-) A dedicated Windows application might handle this
7971 with an event loop for example.
7974 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
7975 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
7976 will be called when RSA_sign() and RSA_verify() are used. This is useful
7977 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
7978 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
7979 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
7980 This necessitated the support of an extra signature type NID_md5_sha1
7981 for SSL signatures and modifications to the SSL library to use it instead
7982 of calling RSA_public_decrypt() and RSA_private_encrypt().
7985 *) Add new -verify -CAfile and -CApath options to the crl program, these
7986 will lookup a CRL issuers certificate and verify the signature in a
7987 similar way to the verify program. Tidy up the crl program so it
7988 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
7989 less strict. It will now permit CRL extensions even if it is not
7990 a V2 CRL: this will allow it to tolerate some broken CRLs.
7993 *) Initialize all non-automatic variables each time one of the openssl
7994 sub-programs is started (this is necessary as they may be started
7995 multiple times from the "OpenSSL>" prompt).
7996 [Lennart Bang, Bodo Moeller]
7998 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
7999 removing all other RSA functionality (this is what NO_RSA does). This
8000 is so (for example) those in the US can disable those operations covered
8001 by the RSA patent while allowing storage and parsing of RSA keys and RSA
8005 *) Non-copying interface to BIO pairs.
8006 (still largely untested)
8009 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
8010 ASCII string. This was handled independently in various places before.
8013 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
8014 UTF8 strings a character at a time.
8017 *) Use client_version from client hello to select the protocol
8018 (s23_srvr.c) and for RSA client key exchange verification
8019 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
8022 *) Add various utility functions to handle SPKACs, these were previously
8023 handled by poking round in the structure internals. Added new function
8024 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
8025 print, verify and generate SPKACs. Based on an original idea from
8026 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
8029 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
8032 *) Allow the config file extension section to be overwritten on the
8033 command line. Based on an original idea from Massimiliano Pala
8034 <madwolf@comune.modena.it>. The new option is called -extensions
8035 and can be applied to ca, req and x509. Also -reqexts to override
8036 the request extensions in req and -crlexts to override the crl extensions
8040 *) Add new feature to the SPKAC handling in ca. Now you can include
8041 the same field multiple times by preceding it by "XXXX." for example:
8044 this is the same syntax as used in the req config file.
8047 *) Allow certificate extensions to be added to certificate requests. These
8048 are specified in a 'req_extensions' option of the req section of the
8049 config file. They can be printed out with the -text option to req but
8050 are otherwise ignored at present.
8053 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
8054 data read consists of only the final block it would not decrypted because
8055 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
8056 A misplaced 'break' also meant the decrypted final block might not be
8057 copied until the next read.
8060 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
8061 a few extra parameters to the DH structure: these will be useful if
8062 for example we want the value of 'q' or implement X9.42 DH.
8065 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
8066 provides hooks that allow the default DSA functions or functions on a
8067 "per key" basis to be replaced. This allows hardware acceleration and
8068 hardware key storage to be handled without major modification to the
8069 library. Also added low level modexp hooks and CRYPTO_EX structure and
8070 associated functions.
8073 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
8074 as "read only": it can't be written to and the buffer it points to will
8075 not be freed. Reading from a read only BIO is much more efficient than
8076 a normal memory BIO. This was added because there are several times when
8077 an area of memory needs to be read from a BIO. The previous method was
8078 to create a memory BIO and write the data to it, this results in two
8079 copies of the data and an O(n^2) reading algorithm. There is a new
8080 function BIO_new_mem_buf() which creates a read only memory BIO from
8081 an area of memory. Also modified the PKCS#7 routines to use read only
8085 *) Bugfix: ssl23_get_client_hello did not work properly when called in
8086 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
8087 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
8088 but a retry condition occured while trying to read the rest.
8091 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
8092 NID_pkcs7_encrypted by default: this was wrong since this should almost
8093 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
8094 the encrypted data type: this is a more sensible place to put it and it
8095 allows the PKCS#12 code to be tidied up that duplicated this
8099 *) Changed obj_dat.pl script so it takes its input and output files on
8100 the command line. This should avoid shell escape redirection problems
8104 *) Initial support for certificate extension requests, these are included
8105 in things like Xenroll certificate requests. Included functions to allow
8106 extensions to be obtained and added.
8109 *) -crlf option to s_client and s_server for sending newlines as
8110 CRLF (as required by many protocols).
8113 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
8115 *) Install libRSAglue.a when OpenSSL is built with RSAref.
8116 [Ralf S. Engelschall]
8118 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
8119 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
8121 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
8125 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
8126 DH parameters/keys (q is lost during that conversion, but the resulting
8127 DH parameters contain its length).
8129 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
8130 much faster than DH_generate_parameters (which creates parameters
8131 where p = 2*q + 1), and also the smaller q makes DH computations
8132 much more efficient (160-bit exponentiation instead of 1024-bit
8133 exponentiation); so this provides a convenient way to support DHE
8134 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
8135 utter importance to use
8136 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8138 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8139 when such DH parameters are used, because otherwise small subgroup
8140 attacks may become possible!
8143 *) Avoid memory leak in i2d_DHparams.
8146 *) Allow the -k option to be used more than once in the enc program:
8147 this allows the same encrypted message to be read by multiple recipients.
8150 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
8151 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
8152 it will always use the numerical form of the OID, even if it has a short
8156 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
8157 method only got called if p,q,dmp1,dmq1,iqmp components were present,
8158 otherwise bn_mod_exp was called. In the case of hardware keys for example
8159 no private key components need be present and it might store extra data
8160 in the RSA structure, which cannot be accessed from bn_mod_exp.
8161 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
8162 private key operations.
8165 *) Added support for SPARC Linux.
8168 *) pem_password_cb function type incompatibly changed from
8169 typedef int pem_password_cb(char *buf, int size, int rwflag);
8171 ....(char *buf, int size, int rwflag, void *userdata);
8172 so that applications can pass data to their callbacks:
8173 The PEM[_ASN1]_{read,write}... functions and macros now take an
8174 additional void * argument, which is just handed through whenever
8175 the password callback is called.
8176 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
8178 New function SSL_CTX_set_default_passwd_cb_userdata.
8180 Compatibility note: As many C implementations push function arguments
8181 onto the stack in reverse order, the new library version is likely to
8182 interoperate with programs that have been compiled with the old
8183 pem_password_cb definition (PEM_whatever takes some data that
8184 happens to be on the stack as its last argument, and the callback
8185 just ignores this garbage); but there is no guarantee whatsoever that
8188 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
8189 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
8190 problems not only on Windows, but also on some Unix platforms.
8191 To avoid problematic command lines, these definitions are now in an
8192 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
8193 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
8196 *) MIPS III/IV assembler module is reimplemented.
8199 *) More DES library cleanups: remove references to srand/rand and
8200 delete an unused file.
8203 *) Add support for the the free Netwide assembler (NASM) under Win32,
8204 since not many people have MASM (ml) and it can be hard to obtain.
8205 This is currently experimental but it seems to work OK and pass all
8206 the tests. Check out INSTALL.W32 for info.
8209 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
8210 without temporary keys kept an extra copy of the server key,
8211 and connections with temporary keys did not free everything in case
8215 *) New function RSA_check_key and new openssl rsa option -check
8216 for verifying the consistency of RSA keys.
8217 [Ulf Moeller, Bodo Moeller]
8219 *) Various changes to make Win32 compile work:
8220 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
8221 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
8222 comparison" warnings.
8223 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
8226 *) Add a debugging option to PKCS#5 v2 key generation function: when
8227 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
8228 derived keys are printed to stderr.
8231 *) Copy the flags in ASN1_STRING_dup().
8232 [Roman E. Pavlov <pre@mo.msk.ru>]
8234 *) The x509 application mishandled signing requests containing DSA
8235 keys when the signing key was also DSA and the parameters didn't match.
8237 It was supposed to omit the parameters when they matched the signing key:
8238 the verifying software was then supposed to automatically use the CA's
8239 parameters if they were absent from the end user certificate.
8241 Omitting parameters is no longer recommended. The test was also
8242 the wrong way round! This was probably due to unusual behaviour in
8243 EVP_cmp_parameters() which returns 1 if the parameters match.
8244 This meant that parameters were omitted when they *didn't* match and
8245 the certificate was useless. Certificates signed with 'ca' didn't have
8247 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
8249 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
8250 The interface is as follows:
8251 Applications can use
8252 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
8253 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
8254 "off" is now the default.
8255 The library internally uses
8256 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
8257 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
8258 to disable memory-checking temporarily.
8260 Some inconsistent states that previously were possible (and were
8261 even the default) are now avoided.
8263 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
8264 with each memory chunk allocated; this is occasionally more helpful
8265 than just having a counter.
8267 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
8269 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
8273 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
8274 which largely parallels "options", but is for changing API behaviour,
8275 whereas "options" are about protocol behaviour.
8276 Initial "mode" flags are:
8278 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
8279 a single record has been written.
8280 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
8281 retries use the same buffer location.
8282 (But all of the contents must be
8286 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
8289 *) Fix problems with no-hmac etc.
8290 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
8292 *) New functions RSA_get_default_method(), RSA_set_method() and
8293 RSA_get_method(). These allows replacement of RSA_METHODs without having
8294 to mess around with the internals of an RSA structure.
8297 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
8298 Also really enable memory leak checks in openssl.c and in some
8300 [Chad C. Mulligan, Bodo Moeller]
8302 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
8303 up the length of negative integers. This has now been simplified to just
8304 store the length when it is first determined and use it later, rather
8305 than trying to keep track of where data is copied and updating it to
8307 [Steve Henson, reported by Brien Wheeler
8308 <bwheeler@authentica-security.com>]
8310 *) Add a new function PKCS7_signatureVerify. This allows the verification
8311 of a PKCS#7 signature but with the signing certificate passed to the
8312 function itself. This contrasts with PKCS7_dataVerify which assumes the
8313 certificate is present in the PKCS#7 structure. This isn't always the
8314 case: certificates can be omitted from a PKCS#7 structure and be
8315 distributed by "out of band" means (such as a certificate database).
8318 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
8319 function prototypes in pem.h, also change util/mkdef.pl to add the
8320 necessary function names.
8323 *) mk1mf.pl (used by Windows builds) did not properly read the
8324 options set by Configure in the top level Makefile, and Configure
8325 was not even able to write more than one option correctly.
8326 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
8329 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
8330 file to be loaded from a BIO or FILE pointer. The BIO version will
8331 for example allow memory BIOs to contain config info.
8334 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
8335 Whoever hopes to achieve shared-library compatibility across versions
8336 must use this, not the compile-time macro.
8337 (Exercise 0.9.4: Which is the minimum library version required by
8339 Note: All this applies only to multi-threaded programs, others don't
8343 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
8344 through a BIO pair triggered the default case, i.e.
8345 SSLerr(...,SSL_R_UNKNOWN_STATE).
8348 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
8349 can use the SSL library even if none of the specific BIOs is
8353 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
8354 for the encoded length.
8355 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
8357 *) Add initial documentation of the X509V3 functions.
8360 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
8361 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
8362 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
8363 secure PKCS#8 private key format with a high iteration count.
8366 *) Fix determination of Perl interpreter: A perl or perl5
8367 _directory_ in $PATH was also accepted as the interpreter.
8368 [Ralf S. Engelschall]
8370 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
8371 wrong with it but it was very old and did things like calling
8372 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
8376 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
8377 to use the new extension code.
8380 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
8381 with macros. This should make it easier to change their form, add extra
8382 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
8386 *) Add to configuration table a new entry that can specify an alternative
8387 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
8388 according to Mark Crispin <MRC@Panda.COM>.
8392 *) DES CBC did not update the IV. Weird.
8395 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
8396 Changing the behaviour of the former might break existing programs --
8397 where IV updating is needed, des_ncbc_encrypt can be used.
8400 *) When bntest is run from "make test" it drives bc to check its
8401 calculations, as well as internally checking them. If an internal check
8402 fails, it needs to cause bc to give a non-zero result or make test carries
8403 on without noticing the failure. Fixed.
8406 *) DES library cleanups.
8409 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
8410 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
8411 ciphers. NOTE: although the key derivation function has been verified
8412 against some published test vectors it has not been extensively tested
8413 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
8417 *) Instead of "mkdir -p", which is not fully portable, use new
8418 Perl script "util/mkdir-p.pl".
8421 *) Rewrite the way password based encryption (PBE) is handled. It used to
8422 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
8423 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
8424 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
8425 the 'parameter' field of the AlgorithmIdentifier is passed to the
8426 underlying key generation function so it must do its own ASN1 parsing.
8427 This has also changed the EVP_PBE_CipherInit() function which now has a
8428 'parameter' argument instead of literal salt and iteration count values
8429 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
8432 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
8433 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
8434 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
8435 KEY" because this clashed with PKCS#8 unencrypted string. Since this
8436 value was just used as a "magic string" and not used directly its
8437 value doesn't matter.
8440 *) Introduce some semblance of const correctness to BN. Shame C doesn't
8444 *) "linux-sparc64" configuration (ultrapenguin).
8445 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
8446 "linux-sparc" configuration.
8447 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
8449 *) config now generates no-xxx options for missing ciphers.
8452 *) Support the EBCDIC character set (work in progress).
8453 File ebcdic.c not yet included because it has a different license.
8454 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8456 *) Support BS2000/OSD-POSIX.
8457 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8459 *) Make callbacks for key generation use void * instead of char *.
8462 *) Make S/MIME samples compile (not yet tested).
8465 *) Additional typesafe stacks.
8468 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
8472 Changes between 0.9.3 and 0.9.3a [29 May 1999]
8474 *) New configuration variant "sco5-gcc".
8476 *) Updated some demos.
8477 [Sean O Riordain, Wade Scholine]
8479 *) Add missing BIO_free at exit of pkcs12 application.
8482 *) Fix memory leak in conf.c.
8485 *) Updates for Win32 to assembler version of MD5.
8488 *) Set #! path to perl in apps/der_chop to where we found it
8489 instead of using a fixed path.
8492 *) SHA library changes for irix64-mips4-cc.
8495 *) Improvements for VMS support.
8499 Changes between 0.9.2b and 0.9.3 [24 May 1999]
8501 *) Bignum library bug fix. IRIX 6 passes "make test" now!
8502 This also avoids the problems with SC4.2 and unpatched SC5.
8503 [Andy Polyakov <appro@fy.chalmers.se>]
8505 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
8506 These are required because of the typesafe stack would otherwise break
8507 existing code. If old code used a structure member which used to be STACK
8508 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
8509 sk_num or sk_value it would produce an error because the num, data members
8510 are not present in STACK_OF. Now it just produces a warning. sk_set
8511 replaces the old method of assigning a value to sk_value
8512 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
8513 that does this will no longer work (and should use sk_set instead) but
8514 this could be regarded as a "questionable" behaviour anyway.
8517 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
8518 correctly handle encrypted S/MIME data.
8521 *) Change type of various DES function arguments from des_cblock
8522 (which means, in function argument declarations, pointer to char)
8523 to des_cblock * (meaning pointer to array with 8 char elements),
8524 which allows the compiler to do more typechecking; it was like
8525 that back in SSLeay, but with lots of ugly casts.
8527 Introduce new type const_des_cblock.
8530 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
8531 problems: find RecipientInfo structure that matches recipient certificate
8532 and initialise the ASN1 structures properly based on passed cipher.
8535 *) Belatedly make the BN tests actually check the results.
8538 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
8539 to and from BNs: it was completely broken. New compilation option
8540 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
8541 key elements as negative integers.
8544 *) Reorganize and speed up MD5.
8545 [Andy Polyakov <appro@fy.chalmers.se>]
8548 [Richard Levitte <richard@levitte.org>]
8550 *) New option -out to asn1parse to allow the parsed structure to be
8551 output to a file. This is most useful when combined with the -strparse
8552 option to examine the output of things like OCTET STRINGS.
8555 *) Make SSL library a little more fool-proof by not requiring any longer
8556 that SSL_set_{accept,connect}_state be called before
8557 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
8558 in many applications because usually everything *appeared* to work as
8559 intended anyway -- now it really works as intended).
8562 *) Move openssl.cnf out of lib/.
8565 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
8566 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
8567 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
8568 [Ralf S. Engelschall]
8570 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
8571 handle PKCS#7 enveloped data properly.
8572 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
8574 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
8575 copying pointers. The cert_st handling is changed by this in
8576 various ways (and thus what used to be known as ctx->default_cert
8577 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
8578 any longer when s->cert does not give us what we need).
8579 ssl_cert_instantiate becomes obsolete by this change.
8580 As soon as we've got the new code right (possibly it already is?),
8581 we have solved a couple of bugs of the earlier code where s->cert
8582 was used as if it could not have been shared with other SSL structures.
8584 Note that using the SSL API in certain dirty ways now will result
8585 in different behaviour than observed with earlier library versions:
8586 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
8587 does not influence s as it used to.
8589 In order to clean up things more thoroughly, inside SSL_SESSION
8590 we don't use CERT any longer, but a new structure SESS_CERT
8591 that holds per-session data (if available); currently, this is
8592 the peer's certificate chain and, for clients, the server's certificate
8593 and temporary key. CERT holds only those values that can have
8594 meaningful defaults in an SSL_CTX.
8597 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
8598 from the internal representation. Various PKCS#7 fixes: remove some
8599 evil casts and set the enc_dig_alg field properly based on the signing
8603 *) Allow PKCS#12 password to be set from the command line or the
8604 environment. Let 'ca' get its config file name from the environment
8605 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
8609 *) Allow certificate policies extension to use an IA5STRING for the
8610 organization field. This is contrary to the PKIX definition but
8611 VeriSign uses it and IE5 only recognises this form. Document 'x509'
8615 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
8616 without disallowing inline assembler and the like for non-pedantic builds.
8619 *) Support Borland C++ builder.
8620 [Janez Jere <jj@void.si>, modified by Ulf Möller]
8625 *) SHA-1 cleanups and performance enhancements.
8626 [Andy Polyakov <appro@fy.chalmers.se>]
8628 *) Sparc v8plus assembler for the bignum library.
8629 [Andy Polyakov <appro@fy.chalmers.se>]
8631 *) Accept any -xxx and +xxx compiler options in Configure.
8634 *) Update HPUX configuration.
8637 *) Add missing sk_<type>_unshift() function to safestack.h
8638 [Ralf S. Engelschall]
8640 *) New function SSL_CTX_use_certificate_chain_file that sets the
8641 "extra_cert"s in addition to the certificate. (This makes sense
8642 only for "PEM" format files, as chains as a whole are not
8646 *) Support verify_depth from the SSL API.
8647 x509_vfy.c had what can be considered an off-by-one-error:
8648 Its depth (which was not part of the external interface)
8649 was actually counting the number of certificates in a chain;
8650 now it really counts the depth.
8653 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
8654 instead of X509err, which often resulted in confusing error
8655 messages since the error codes are not globally unique
8656 (e.g. an alleged error in ssl3_accept when a certificate
8657 didn't match the private key).
8659 *) New function SSL_CTX_set_session_id_context that allows to set a default
8660 value (so that you don't need SSL_set_session_id_context for each
8661 connection using the SSL_CTX).
8664 *) OAEP decoding bug fix.
8667 *) Support INSTALL_PREFIX for package builders, as proposed by
8671 *) New Configure options "threads" and "no-threads". For systems
8672 where the proper compiler options are known (currently Solaris
8673 and Linux), "threads" is the default.
8676 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
8679 *) Install various scripts to $(OPENSSLDIR)/misc, not to
8680 $(INSTALLTOP)/bin -- they shouldn't clutter directories
8681 such as /usr/local/bin.
8684 *) "make linux-shared" to build shared libraries.
8685 [Niels Poppe <niels@netbox.org>]
8687 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
8690 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
8691 extension adding in x509 utility.
8694 *) Remove NOPROTO sections and error code comments.
8697 *) Partial rewrite of the DEF file generator to now parse the ANSI
8701 *) New Configure options --prefix=DIR and --openssldir=DIR.
8704 *) Complete rewrite of the error code script(s). It is all now handled
8705 by one script at the top level which handles error code gathering,
8706 header rewriting and C source file generation. It should be much better
8707 than the old method: it now uses a modified version of Ulf's parser to
8708 read the ANSI prototypes in all header files (thus the old K&R definitions
8709 aren't needed for error creation any more) and do a better job of
8710 translating function codes into names. The old 'ASN1 error code imbedded
8711 in a comment' is no longer necessary and it doesn't use .err files which
8712 have now been deleted. Also the error code call doesn't have to appear all
8713 on one line (which resulted in some large lines...).
8716 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
8719 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
8720 0 (which usually indicates a closed connection), but continue reading.
8723 *) Fix some race conditions.
8726 *) Add support for CRL distribution points extension. Add Certificate
8727 Policies and CRL distribution points documentation.
8730 *) Move the autogenerated header file parts to crypto/opensslconf.h.
8733 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8734 8 of keying material. Merlin has also confirmed interop with this fix
8735 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
8736 [Merlin Hughes <merlin@baltimore.ie>]
8738 *) Fix lots of warnings.
8739 [Richard Levitte <levitte@stacken.kth.se>]
8741 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
8742 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
8743 [Richard Levitte <levitte@stacken.kth.se>]
8745 *) Fix problems with sizeof(long) == 8.
8746 [Andy Polyakov <appro@fy.chalmers.se>]
8748 *) Change functions to ANSI C.
8751 *) Fix typos in error codes.
8752 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
8754 *) Remove defunct assembler files from Configure.
8757 *) SPARC v8 assembler BIGNUM implementation.
8758 [Andy Polyakov <appro@fy.chalmers.se>]
8760 *) Support for Certificate Policies extension: both print and set.
8761 Various additions to support the r2i method this uses.
8764 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
8765 return a const string when you are expecting an allocated buffer.
8768 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
8769 types DirectoryString and DisplayText.
8772 *) Add code to allow r2i extensions to access the configuration database,
8773 add an LHASH database driver and add several ctx helper functions.
8776 *) Fix an evil bug in bn_expand2() which caused various BN functions to
8777 fail when they extended the size of a BIGNUM.
8780 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
8781 support typesafe stack.
8784 *) Fix typo in SSL_[gs]et_options().
8785 [Nils Frostberg <nils@medcom.se>]
8787 *) Delete various functions and files that belonged to the (now obsolete)
8788 old X509V3 handling code.
8791 *) New Configure option "rsaref".
8794 *) Don't auto-generate pem.h.
8797 *) Introduce type-safe ASN.1 SETs.
8800 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
8801 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
8803 *) Introduce type-safe STACKs. This will almost certainly break lots of code
8804 that links with OpenSSL (well at least cause lots of warnings), but fear
8805 not: the conversion is trivial, and it eliminates loads of evil casts. A
8806 few STACKed things have been converted already. Feel free to convert more.
8807 In the fullness of time, I'll do away with the STACK type altogether.
8810 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
8811 specified in <certfile> by updating the entry in the index.txt file.
8812 This way one no longer has to edit the index.txt file manually for
8813 revoking a certificate. The -revoke option does the gory details now.
8814 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
8816 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
8817 `-text' option at all and this way the `-noout -text' combination was
8818 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
8819 [Ralf S. Engelschall]
8821 *) Make sure a corresponding plain text error message exists for the
8822 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
8823 verify callback function determined that a certificate was revoked.
8824 [Ralf S. Engelschall]
8826 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
8827 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
8828 all available cipers including rc5, which was forgotten until now.
8829 In order to let the testing shell script know which algorithms
8830 are available, a new (up to now undocumented) command
8831 "openssl list-cipher-commands" is used.
8834 *) Bugfix: s_client occasionally would sleep in select() when
8835 it should have checked SSL_pending() first.
8838 *) New functions DSA_do_sign and DSA_do_verify to provide access to
8839 the raw DSA values prior to ASN.1 encoding.
8842 *) Tweaks to Configure
8843 [Niels Poppe <niels@netbox.org>]
8845 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
8849 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
8852 *) New config option to avoid instructions that are illegal on the 80386.
8853 The default code is faster, but requires at least a 486.
8856 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
8857 SSL2_SERVER_VERSION (not used at all) macros, which are now the
8858 same as SSL2_VERSION anyway.
8861 *) New "-showcerts" option for s_client.
8864 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
8865 application. Various cleanups and fixes.
8868 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
8869 modify error routines to work internally. Add error codes and PBE init
8870 to library startup routines.
8873 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
8874 packing functions to asn1 and evp. Changed function names and error
8875 codes along the way.
8878 *) PKCS12 integration: and so it begins... First of several patches to
8879 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
8880 objects to objects.h
8883 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
8884 and display support for Thawte strong extranet extension.
8887 *) Add LinuxPPC support.
8888 [Jeff Dubrule <igor@pobox.org>]
8890 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
8891 bn_div_words in alpha.s.
8892 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
8894 *) Make sure the RSA OAEP test is skipped under -DRSAref because
8895 OAEP isn't supported when OpenSSL is built with RSAref.
8896 [Ulf Moeller <ulf@fitug.de>]
8898 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
8899 so they no longer are missing under -DNOPROTO.
8900 [Soren S. Jorvang <soren@t.dk>]
8903 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
8905 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
8906 doesn't work when the session is reused. Coming soon!
8909 *) Fix a security hole, that allows sessions to be reused in the wrong
8910 context thus bypassing client cert protection! All software that uses
8911 client certs and session caches in multiple contexts NEEDS PATCHING to
8912 allow session reuse! A fuller solution is in the works.
8913 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
8915 *) Some more source tree cleanups (removed obsolete files
8916 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
8917 permission on "config" script to be executable) and a fix for the INSTALL
8919 [Ulf Moeller <ulf@fitug.de>]
8921 *) Remove some legacy and erroneous uses of malloc, free instead of
8923 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
8925 *) Make rsa_oaep_test return non-zero on error.
8926 [Ulf Moeller <ulf@fitug.de>]
8928 *) Add support for native Solaris shared libraries. Configure
8929 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
8930 if someone would make that last step automatic.
8931 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
8933 *) ctx_size was not built with the right compiler during "make links". Fixed.
8936 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
8937 except NULL ciphers". This means the default cipher list will no longer
8938 enable NULL ciphers. They need to be specifically enabled e.g. with
8939 the string "DEFAULT:eNULL".
8942 *) Fix to RSA private encryption routines: if p < q then it would
8943 occasionally produce an invalid result. This will only happen with
8944 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
8947 *) Be less restrictive and allow also `perl util/perlpath.pl
8948 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
8949 because this way one can also use an interpreter named `perl5' (which is
8950 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
8951 installed as `perl').
8952 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
8954 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
8955 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
8957 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
8958 advapi32.lib to Win32 build and change the pem test comparision
8959 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
8960 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
8961 and crypto/des/ede_cbcm_enc.c.
8964 *) DES quad checksum was broken on big-endian architectures. Fixed.
8967 *) Comment out two functions in bio.h that aren't implemented. Fix up the
8968 Win32 test batch file so it (might) work again. The Win32 test batch file
8969 is horrible: I feel ill....
8972 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
8973 in e_os.h. Audit of header files to check ANSI and non ANSI
8974 sections: 10 functions were absent from non ANSI section and not exported
8975 from Windows DLLs. Fixed up libeay.num for new functions.
8978 *) Make `openssl version' output lines consistent.
8979 [Ralf S. Engelschall]
8981 *) Fix Win32 symbol export lists for BIO functions: Added
8982 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
8983 to ms/libeay{16,32}.def.
8984 [Ralf S. Engelschall]
8986 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
8987 fine under Unix and passes some trivial tests I've now added. But the
8988 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
8989 added to make sure no one expects that this stuff really works in the
8990 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
8991 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
8993 [Ralf S. Engelschall]
8995 *) Fix the generation of two part addresses in perl.
8996 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
8998 *) Add config entry for Linux on MIPS.
8999 [John Tobey <jtobey@channel1.com>]
9001 *) Make links whenever Configure is run, unless we are on Windoze.
9004 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
9005 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
9009 *) Add a useful kludge to allow package maintainers to specify compiler and
9010 other platforms details on the command line without having to patch the
9011 Configure script everytime: One now can use ``perl Configure
9012 <id>:<details>'', i.e. platform ids are allowed to have details appended
9013 to them (seperated by colons). This is treated as there would be a static
9014 pre-configured entry in Configure's %table under key <id> with value
9015 <details> and ``perl Configure <id>'' is called. So, when you want to
9016 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
9017 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
9018 now, which overrides the FreeBSD-elf entry on-the-fly.
9019 [Ralf S. Engelschall]
9021 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
9024 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
9025 on the `perl Configure ...' command line. This way one can compile
9026 OpenSSL libraries with Position Independent Code (PIC) which is needed
9027 for linking it into DSOs.
9028 [Ralf S. Engelschall]
9030 *) Remarkably, export ciphers were totally broken and no-one had noticed!
9034 *) Cleaned up the LICENSE document: The official contact for any license
9035 questions now is the OpenSSL core team under openssl-core@openssl.org.
9036 And add a paragraph about the dual-license situation to make sure people
9037 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
9038 to the OpenSSL toolkit.
9039 [Ralf S. Engelschall]
9041 *) General source tree makefile cleanups: Made `making xxx in yyy...'
9042 display consistent in the source tree and replaced `/bin/rm' by `rm'.
9043 Additonally cleaned up the `make links' target: Remove unnecessary
9044 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
9045 to speed processing and no longer clutter the display with confusing
9046 stuff. Instead only the actually done links are displayed.
9047 [Ralf S. Engelschall]
9049 *) Permit null encryption ciphersuites, used for authentication only. It used
9050 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
9051 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
9055 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
9056 signed attributes when verifying signatures (this would break them),
9057 the detached data encoding was wrong and public keys obtained using
9058 X509_get_pubkey() weren't freed.
9061 *) Add text documentation for the BUFFER functions. Also added a work around
9062 to a Win95 console bug. This was triggered by the password read stuff: the
9063 last character typed gets carried over to the next fread(). If you were
9064 generating a new cert request using 'req' for example then the last
9065 character of the passphrase would be CR which would then enter the first
9069 *) Added the new `Includes OpenSSL Cryptography Software' button as
9070 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
9071 button and can be used by applications based on OpenSSL to show the
9072 relationship to the OpenSSL project.
9073 [Ralf S. Engelschall]
9075 *) Remove confusing variables in function signatures in files
9076 ssl/ssl_lib.c and ssl/ssl.h.
9077 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9079 *) Don't install bss_file.c under PREFIX/include/
9080 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9082 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
9083 functions that return function pointers and has support for NT specific
9084 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
9085 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
9086 unsigned to signed types: this was killing the Win32 compile.
9089 *) Add new certificate file to stack functions,
9090 SSL_add_dir_cert_subjects_to_stack() and
9091 SSL_add_file_cert_subjects_to_stack(). These largely supplant
9092 SSL_load_client_CA_file(), and can be used to add multiple certs easily
9093 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
9094 This means that Apache-SSL and similar packages don't have to mess around
9095 to add as many CAs as they want to the preferred list.
9098 *) Experiment with doxygen documentation. Currently only partially applied to
9100 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
9101 openssl.doxy as the configuration file.
9104 *) Get rid of remaining C++-style comments which strict C compilers hate.
9105 [Ralf S. Engelschall, pointed out by Carlos Amengual]
9107 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
9108 compiled in by default: it has problems with large keys.
9111 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
9112 DH private keys and/or callback functions which directly correspond to
9113 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
9114 is needed for applications which have to configure certificates on a
9115 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
9117 For the RSA certificate situation is makes no difference, but
9118 for the DSA certificate situation this fixes the "no shared cipher"
9119 problem where the OpenSSL cipher selection procedure failed because the
9120 temporary keys were not overtaken from the context and the API provided
9121 no way to reconfigure them.
9122 The new functions now let applications reconfigure the stuff and they
9123 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
9124 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
9125 non-public-API function ssl_cert_instantiate() is used as a helper
9126 function and also to reduce code redundancy inside ssl_rsa.c.
9127 [Ralf S. Engelschall]
9129 *) Move s_server -dcert and -dkey options out of the undocumented feature
9130 area because they are useful for the DSA situation and should be
9131 recognized by the users.
9132 [Ralf S. Engelschall]
9134 *) Fix the cipher decision scheme for export ciphers: the export bits are
9135 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
9136 SSL_EXP_MASK. So, the original variable has to be used instead of the
9137 already masked variable.
9138 [Richard Levitte <levitte@stacken.kth.se>]
9140 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
9141 [Richard Levitte <levitte@stacken.kth.se>]
9143 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
9144 from `int' to `unsigned int' because it's a length and initialized by
9145 EVP_DigestFinal() which expects an `unsigned int *'.
9146 [Richard Levitte <levitte@stacken.kth.se>]
9148 *) Don't hard-code path to Perl interpreter on shebang line of Configure
9149 script. Instead use the usual Shell->Perl transition trick.
9150 [Ralf S. Engelschall]
9152 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
9153 (in addition to RSA certificates) to match the behaviour of `openssl dsa
9154 -noout -modulus' as it's already the case for `openssl rsa -noout
9155 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
9156 currently the public key is printed (a decision which was already done by
9157 `openssl dsa -modulus' in the past) which serves a similar purpose.
9158 Additionally the NO_RSA no longer completely removes the whole -modulus
9159 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
9161 [Ralf S. Engelschall]
9163 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
9164 BIO. See the source (crypto/evp/bio_ok.c) for more info.
9165 [Arne Ansper <arne@ats.cyber.ee>]
9167 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
9168 to be added. Now both 'req' and 'ca' can use new objects defined in the
9172 *) Add cool BIO that does syslog (or event log on NT).
9173 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
9175 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
9176 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
9177 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
9178 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
9181 *) Add preliminary config info for new extension code.
9184 *) Make RSA_NO_PADDING really use no padding.
9185 [Ulf Moeller <ulf@fitug.de>]
9187 *) Generate errors when private/public key check is done.
9190 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
9191 for some CRL extensions and new objects added.
9194 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
9195 key usage extension and fuller support for authority key id.
9198 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
9199 padding method for RSA, which is recommended for new applications in PKCS
9200 #1 v2.0 (RFC 2437, October 1998).
9201 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
9202 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
9203 against Bleichbacher's attack on RSA.
9204 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
9207 *) Updates to the new SSL compression code
9208 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9210 *) Fix so that the version number in the master secret, when passed
9211 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
9212 (because the server will not accept higher), that the version number
9213 is 0x03,0x01, not 0x03,0x00
9214 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9216 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
9217 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
9218 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
9221 *) Support for RAW extensions where an arbitrary extension can be
9222 created by including its DER encoding. See apps/openssl.cnf for
9226 *) Make sure latest Perl versions don't interpret some generated C array
9227 code as Perl array code in the crypto/err/err_genc.pl script.
9228 [Lars Weber <3weber@informatik.uni-hamburg.de>]
9230 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
9231 not many people have the assembler. Various Win32 compilation fixes and
9232 update to the INSTALL.W32 file with (hopefully) more accurate Win32
9236 *) Modify configure script 'Configure' to automatically create crypto/date.h
9237 file under Win32 and also build pem.h from pem.org. New script
9238 util/mkfiles.pl to create the MINFO file on environments that can't do a
9239 'make files': perl util/mkfiles.pl >MINFO should work.
9242 *) Major rework of DES function declarations, in the pursuit of correctness
9243 and purity. As a result, many evil casts evaporated, and some weirdness,
9244 too. You may find this causes warnings in your code. Zapping your evil
9245 casts will probably fix them. Mostly.
9248 *) Fix for a typo in asn1.h. Bug fix to object creation script
9249 obj_dat.pl. It considered a zero in an object definition to mean
9250 "end of object": none of the objects in objects.h have any zeros
9251 so it wasn't spotted.
9252 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
9254 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
9255 Masking (CBCM). In the absence of test vectors, the best I have been able
9256 to do is check that the decrypt undoes the encrypt, so far. Send me test
9257 vectors if you have them.
9260 *) Correct calculation of key length for export ciphers (too much space was
9261 allocated for null ciphers). This has not been tested!
9264 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
9265 message is now correct (it understands "crypto" and "ssl" on its
9266 command line). There is also now an "update" option. This will update
9267 the util/ssleay.num and util/libeay.num files with any new functions.
9269 perl util/mkdef.pl crypto ssl update
9270 it will update them.
9273 *) Overhauled the Perl interface (perl/*):
9274 - ported BN stuff to OpenSSL's different BN library
9275 - made the perl/ source tree CVS-aware
9276 - renamed the package from SSLeay to OpenSSL (the files still contain
9277 their history because I've copied them in the repository)
9278 - removed obsolete files (the test scripts will be replaced
9279 by better Test::Harness variants in the future)
9280 [Ralf S. Engelschall]
9282 *) First cut for a very conservative source tree cleanup:
9283 1. merge various obsolete readme texts into doc/ssleay.txt
9284 where we collect the old documents and readme texts.
9285 2. remove the first part of files where I'm already sure that we no
9286 longer need them because of three reasons: either they are just temporary
9287 files which were left by Eric or they are preserved original files where
9288 I've verified that the diff is also available in the CVS via "cvs diff
9289 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
9290 the crypto/md/ stuff).
9291 [Ralf S. Engelschall]
9293 *) More extension code. Incomplete support for subject and issuer alt
9294 name, issuer and authority key id. Change the i2v function parameters
9295 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
9296 what that's for :-) Fix to ASN1 macro which messed up
9297 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
9300 *) Preliminary support for ENUMERATED type. This is largely copied from the
9304 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
9305 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9307 *) Make sure `make rehash' target really finds the `openssl' program.
9308 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9310 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
9311 like to hear about it if this slows down other processors.
9314 *) Add CygWin32 platform information to Configure script.
9315 [Alan Batie <batie@aahz.jf.intel.com>]
9317 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
9318 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
9320 *) New program nseq to manipulate netscape certificate sequences
9323 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
9327 *) Fixes to BN code. Previously the default was to define BN_RECURSION
9328 but the BN code had some problems that would cause failures when
9329 doing certificate verification and some other functions.
9330 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9332 *) Add ASN1 and PEM code to support netscape certificate sequences.
9335 *) Add ASN1 and PEM code to support netscape certificate sequences.
9338 *) Add several PKIX and private extended key usage OIDs.
9341 *) Modify the 'ca' program to handle the new extension code. Modify
9342 openssl.cnf for new extension format, add comments.
9345 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
9346 and add a sample to openssl.cnf so req -x509 now adds appropriate
9350 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
9351 error code, add initial support to X509_print() and x509 application.
9354 *) Takes a deep breath and start addding X509 V3 extension support code. Add
9355 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
9356 stuff is currently isolated and isn't even compiled yet.
9359 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
9360 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
9361 Removed the versions check from X509 routines when loading extensions:
9362 this allows certain broken certificates that don't set the version
9363 properly to be processed.
9366 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
9367 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
9368 can still be regenerated with "make depend".
9371 *) Spelling mistake in C version of CAST-128.
9372 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
9374 *) Changes to the error generation code. The perl script err-code.pl
9375 now reads in the old error codes and retains the old numbers, only
9376 adding new ones if necessary. It also only changes the .err files if new
9377 codes are added. The makefiles have been modified to only insert errors
9378 when needed (to avoid needlessly modifying header files). This is done
9379 by only inserting errors if the .err file is newer than the auto generated
9380 C file. To rebuild all the error codes from scratch (the old behaviour)
9381 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
9382 or delete all the .err files.
9385 *) CAST-128 was incorrectly implemented for short keys. The C version has
9386 been fixed, but is untested. The assembler versions are also fixed, but
9387 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
9388 to regenerate it if needed.
9389 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
9390 Hagino <itojun@kame.net>]
9392 *) File was opened incorrectly in randfile.c.
9393 [Ulf Möller <ulf@fitug.de>]
9395 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
9396 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
9397 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
9398 al: it's just almost always a UTCTime. Note this patch adds new error
9399 codes so do a "make errors" if there are problems.
9402 *) Correct Linux 1 recognition in config.
9403 [Ulf Möller <ulf@fitug.de>]
9405 *) Remove pointless MD5 hash when using DSA keys in ca.
9406 [Anonymous <nobody@replay.com>]
9408 *) Generate an error if given an empty string as a cert directory. Also
9409 generate an error if handed NULL (previously returned 0 to indicate an
9410 error, but didn't set one).
9411 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
9413 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
9416 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
9417 parameters. This was causing a warning which killed off the Win32 compile.
9420 *) Remove C++ style comments from crypto/bn/bn_local.h.
9421 [Neil Costigan <neil.costigan@celocom.com>]
9423 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
9424 based on a text string, looking up short and long names and finally
9425 "dot" format. The "dot" format stuff didn't work. Added new function
9426 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
9427 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
9428 OID is not part of the table.
9431 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
9432 X509_LOOKUP_by_alias().
9435 *) Sort openssl functions by name.
9438 *) Get the gendsa program working (hopefully) and add it to app list. Remove
9439 encryption from sample DSA keys (in case anyone is interested the password
9443 *) Make _all_ *_free functions accept a NULL pointer.
9444 [Frans Heymans <fheymans@isaserver.be>]
9446 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
9448 [Anonymous <nobody@replay.com>]
9450 *) s_server should send the CAfile as acceptable CAs, not its own cert.
9451 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9453 *) Don't blow it for numeric -newkey arguments to apps/req.
9454 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9456 *) Temp key "for export" tests were wrong in s3_srvr.c.
9457 [Anonymous <nobody@replay.com>]
9459 *) Add prototype for temp key callback functions
9460 SSL_CTX_set_tmp_{rsa,dh}_callback().
9463 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
9464 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
9467 *) X509_name_add_entry() freed the wrong thing after an error.
9468 [Arne Ansper <arne@ats.cyber.ee>]
9470 *) rsa_eay.c would attempt to free a NULL context.
9471 [Arne Ansper <arne@ats.cyber.ee>]
9473 *) BIO_s_socket() had a broken should_retry() on Windoze.
9474 [Arne Ansper <arne@ats.cyber.ee>]
9476 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
9477 [Arne Ansper <arne@ats.cyber.ee>]
9479 *) Make sure the already existing X509_STORE->depth variable is initialized
9480 in X509_STORE_new(), but document the fact that this variable is still
9481 unused in the certificate verification process.
9482 [Ralf S. Engelschall]
9484 *) Fix the various library and apps files to free up pkeys obtained from
9485 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
9488 *) Fix reference counting in X509_PUBKEY_get(). This makes
9489 demos/maurice/example2.c work, amongst others, probably.
9490 [Steve Henson and Ben Laurie]
9492 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
9493 `openssl' and second, the shortcut symlinks for the `openssl <command>'
9494 are no longer created. This way we have a single and consistent command
9495 line interface `openssl <command>', similar to `cvs <command>'.
9496 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
9498 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
9499 BIT STRING wrapper always have zero unused bits.
9502 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
9505 *) Make the top-level INSTALL documentation easier to understand.
9508 *) Makefiles updated to exit if an error occurs in a sub-directory
9509 make (including if user presses ^C) [Paul Sutton]
9511 *) Make Montgomery context stuff explicit in RSA data structure.
9514 *) Fix build order of pem and err to allow for generated pem.h.
9517 *) Fix renumbering bug in X509_NAME_delete_entry().
9520 *) Enhanced the err-ins.pl script so it makes the error library number
9521 global and can add a library name. This is needed for external ASN1 and
9522 other error libraries.
9525 *) Fixed sk_insert which never worked properly.
9528 *) Fix ASN1 macros so they can handle indefinite length construted
9529 EXPLICIT tags. Some non standard certificates use these: they can now
9533 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
9534 into a single doc/ssleay.txt bundle. This way the information is still
9535 preserved but no longer messes up this directory. Now it's new room for
9536 the new set of documenation files.
9537 [Ralf S. Engelschall]
9539 *) SETs were incorrectly DER encoded. This was a major pain, because they
9540 shared code with SEQUENCEs, which aren't coded the same. This means that
9541 almost everything to do with SETs or SEQUENCEs has either changed name or
9542 number of arguments.
9543 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
9545 *) Fix test data to work with the above.
9548 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
9549 was already fixed by Eric for 0.9.1 it seems.
9550 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
9552 *) Autodetect FreeBSD3.
9555 *) Fix various bugs in Configure. This affects the following platforms:
9559 unixware-2.0-pentium
9563 *) Eliminate generated files from CVS. Reorder tests to regenerate files
9564 before they are needed.
9567 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
9571 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
9573 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
9574 changed SSLeay to OpenSSL in version strings.
9575 [Ralf S. Engelschall]
9577 *) Some fixups to the top-level documents.
9580 *) Fixed the nasty bug where rsaref.h was not found under compile-time
9581 because the symlink to include/ was missing.
9582 [Ralf S. Engelschall]
9584 *) Incorporated the popular no-RSA/DSA-only patches
9585 which allow to compile a RSA-free SSLeay.
9586 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
9588 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
9589 when "ssleay" is still not found.
9590 [Ralf S. Engelschall]
9592 *) Added more platforms to Configure: Cray T3E, HPUX 11,
9593 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
9595 *) Updated the README file.
9596 [Ralf S. Engelschall]
9598 *) Added various .cvsignore files in the CVS repository subdirs
9599 to make a "cvs update" really silent.
9600 [Ralf S. Engelschall]
9602 *) Recompiled the error-definition header files and added
9603 missing symbols to the Win32 linker tables.
9604 [Ralf S. Engelschall]
9606 *) Cleaned up the top-level documents;
9607 o new files: CHANGES and LICENSE
9608 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
9609 o merged COPYRIGHT into LICENSE
9610 o removed obsolete TODO file
9611 o renamed MICROSOFT to INSTALL.W32
9612 [Ralf S. Engelschall]
9614 *) Removed dummy files from the 0.9.1b source tree:
9615 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
9616 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
9617 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
9618 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
9619 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
9620 [Ralf S. Engelschall]
9622 *) Added various platform portability fixes.
9625 *) The Genesis of the OpenSSL rpject:
9626 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
9627 Young and Tim J. Hudson created while they were working for C2Net until
9629 [The OpenSSL Project]
9632 Changes between 0.9.0b and 0.9.1b [not released]
9634 *) Updated a few CA certificates under certs/
9637 *) Changed some BIGNUM api stuff.
9640 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
9641 DGUX x86, Linux Alpha, etc.
9644 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
9645 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
9649 *) Add -strparse option to asn1pars program which parses nested
9651 [Dr Stephen Henson <shenson@bigfoot.com>]
9653 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
9656 *) DSA fix for "ca" program.
9659 *) Added "-genkey" option to "dsaparam" program.
9662 *) Added RIPE MD160 (rmd160) message digest.
9665 *) Added -a (all) option to "ssleay version" command.
9668 *) Added PLATFORM define which is the id given to Configure.
9671 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
9674 *) Extended the ASN.1 parser routines.
9677 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
9680 *) Added a BN_CTX to the BN library.
9683 *) Fixed the weak key values in DES library
9686 *) Changed API in EVP library for cipher aliases.
9689 *) Added support for RC2/64bit cipher.
9692 *) Converted the lhash library to the crypto/mem.c functions.
9695 *) Added more recognized ASN.1 object ids.
9698 *) Added more RSA padding checks for SSL/TLS.
9701 *) Added BIO proxy/filter functionality.
9704 *) Added extra_certs to SSL_CTX which can be used
9705 send extra CA certificates to the client in the CA cert chain sending
9706 process. It can be configured with SSL_CTX_add_extra_chain_cert().
9709 *) Now Fortezza is denied in the authentication phase because
9710 this is key exchange mechanism is not supported by SSLeay at all.
9713 *) Additional PKCS1 checks.
9716 *) Support the string "TLSv1" for all TLS v1 ciphers.
9719 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
9720 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
9723 *) Fixed a few memory leaks.
9726 *) Fixed various code and comment typos.
9729 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
9730 bytes sent in the client random.
9731 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob