5 Changes between 0.9.3a and 0.9.4
7 *) Copy the flags in ASN1_STRING_dup().
8 [Roman E. Pavlov <pre@mo.msk.ru>]
10 *) The x509 application mishandled signing requests containing DSA
11 keys when the signing key was also DSA and the parameters didn't match.
13 It was supposed to omit the parameters when they matched the signing key:
14 the verifying software was then supposed to automatically use the CA's
15 parameters if they were absent from the end user certificate.
17 Omitting parameters is no longer recommended. The test was also
18 the wrong way round! This was probably due to unusual behaviour in
19 EVP_cmp_parameters() which returns 1 if the parameters match.
20 This meant that parameters were omitted when they *didn't* match and
21 the certificate was useless. Certificates signed with 'ca' didn't have
23 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
25 *) Memory leak checking had some problems. The interface is as follows:
27 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
28 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
29 "off" is now the default.
30 The library internally uses
31 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
32 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
33 to disable memory-checking temporarily.
35 Some inconsistent states that previously were possible (and were
36 even the default) are now avoided.
39 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
40 which largely parallels "options", but is for changing API behaviour,
41 whereas "options" are about protocol behaviour.
42 Initial "mode" flags (still experimental) are:
44 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
45 a single record has been written.
46 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
47 retries use the same buffer location.
48 (But all of the contents must be
52 *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
55 *) Fix problems with no-hmac etc.
56 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
58 *) New functions RSA_get_default_method(), RSA_set_method() and
59 RSA_get_method(). These allows replacement of RSA_METHODs without having
60 to mess around with the internals of an RSA structure.
63 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
64 Also really enable memory leak checks in openssl.c and in some
66 [Chad C. Mulligan, Bodo Moeller]
68 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
69 up the length of negative integers. This has now been simplified to just
70 store the length when it is first determined and use it later, rather
71 than trying to keep track of where data is copied and updating it to
73 [Steve Henson, reported by Brien Wheeler
74 <bwheeler@authentica-security.com>]
76 *) Add a new function PKCS7_signatureVerify. This allows the verification
77 of a PKCS#7 signature but with the signing certificate passed to the
78 function itself. This contrasts with PKCS7_dataVerify which assumes the
79 certificate is present in the PKCS#7 structure. This isn't always the
80 case: certificates can be omitted from a PKCS#7 structure and be
81 distributed by "out of band" means (such as a certificate database).
84 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
85 function prototypes in pem.h, also change util/mkdef.pl to add the
86 necessary function names.
89 *) mk1mf.pl (used by Windows builds) did not properly read the
90 options set by Configure in the top level Makefile, and Configure
91 was not even able to write more than one option correctly.
92 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
95 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
96 file to be loaded from a BIO or FILE pointer. The BIO version will
97 for example allow memory BIOs to contain config info.
100 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
101 Whoever hopes to achieve shared-library compatibility across versions
102 must use this, not the compile-time macro.
103 (Exercise 0.9.4: Which is the minimum library version required by
105 Note: All this applies only to multi-threaded programs, others don't
109 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
110 through a BIO pair triggered the default case, i.e.
111 SSLerr(...,SSL_R_UNKNOWN_STATE).
114 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
115 can use the SSL library even if none of the specific BIOs is
119 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
120 for the encoded length.
121 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
123 *) Add initial documentation of the X509V3 functions.
126 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
127 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
128 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
129 secure PKCS#8 private key format with a high iteration count.
132 *) Fix determination of Perl interpreter: A perl or perl5
133 _directory_ in $PATH was also accepted as the interpreter.
134 [Ralf S. Engelschall]
136 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
137 wrong with it but it was very old and did things like calling
138 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
142 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
143 to use the new extension code.
146 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
147 with macros. This should make it easier to change their form, add extra
148 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
152 *) Add to configuration table a new entry that can specify an alternative
153 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
154 according to Mark Crispin <MRC@Panda.COM>.
158 *) DES CBC did not update the IV. Weird.
161 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
162 Changing the behaviour of the former might break existing programs --
163 where IV updating is needed, des_ncbc_encrypt can be used.
166 *) When bntest is run from "make test" it drives bc to check its
167 calculations, as well as internally checking them. If an internal check
168 fails, it needs to cause bc to give a non-zero result or make test carries
169 on without noticing the failure. Fixed.
172 *) DES library cleanups.
175 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
176 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
177 ciphers. NOTE: although the key derivation function has been verified
178 against some published test vectors it has not been extensively tested
179 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
183 *) Instead of "mkdir -p", which is not fully portable, use new
184 Perl script "util/mkdir-p.pl".
187 *) Rewrite the way password based encryption (PBE) is handled. It used to
188 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
189 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
190 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
191 the 'parameter' field of the AlgorithmIdentifier is passed to the
192 underlying key generation function so it must do its own ASN1 parsing.
193 This has also changed the EVP_PBE_CipherInit() function which now has a
194 'parameter' argument instead of literal salt and iteration count values
195 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
198 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
199 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
200 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
201 KEY" because this clashed with PKCS#8 unencrypted string. Since this
202 value was just used as a "magic string" and not used directly its
203 value doesn't matter.
206 *) Introduce some semblance of const correctness to BN. Shame C doesn't
210 *) "linux-sparc64" configuration (ultrapenguin).
211 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
212 "linux-sparc" configuration.
213 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
215 *) config now generates no-xxx options for missing ciphers.
218 *) Support the EBCDIC character set (work in progress).
219 File ebcdic.c not yet included because it has a different license.
220 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
222 *) Support BS2000/OSD-POSIX.
223 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
225 *) Make callbacks for key generation use void * instead of char *.
228 *) Make S/MIME samples compile (not yet tested).
231 *) Additional typesafe stacks.
234 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
238 Changes between 0.9.3 and 0.9.3a [29 May 1999]
240 *) New configuration variant "sco5-gcc".
242 *) Updated some demos.
243 [Sean O Riordain, Wade Scholine]
245 *) Add missing BIO_free at exit of pkcs12 application.
248 *) Fix memory leak in conf.c.
251 *) Updates for Win32 to assembler version of MD5.
254 *) Set #! path to perl in apps/der_chop to where we found it
255 instead of using a fixed path.
258 *) SHA library changes for irix64-mips4-cc.
261 *) Improvements for VMS support.
265 Changes between 0.9.2b and 0.9.3 [24 May 1999]
267 *) Bignum library bug fix. IRIX 6 passes "make test" now!
268 This also avoids the problems with SC4.2 and unpatched SC5.
269 [Andy Polyakov <appro@fy.chalmers.se>]
271 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
272 These are required because of the typesafe stack would otherwise break
273 existing code. If old code used a structure member which used to be STACK
274 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
275 sk_num or sk_value it would produce an error because the num, data members
276 are not present in STACK_OF. Now it just produces a warning. sk_set
277 replaces the old method of assigning a value to sk_value
278 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
279 that does this will no longer work (and should use sk_set instead) but
280 this could be regarded as a "questionable" behaviour anyway.
283 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
284 correctly handle encrypted S/MIME data.
287 *) Change type of various DES function arguments from des_cblock
288 (which means, in function argument declarations, pointer to char)
289 to des_cblock * (meaning pointer to array with 8 char elements),
290 which allows the compiler to do more typechecking; it was like
291 that back in SSLeay, but with lots of ugly casts.
293 Introduce new type const_des_cblock.
296 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
297 problems: find RecipientInfo structure that matches recipient certificate
298 and initialise the ASN1 structures properly based on passed cipher.
301 *) Belatedly make the BN tests actually check the results.
304 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
305 to and from BNs: it was completely broken. New compilation option
306 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
307 key elements as negative integers.
310 *) Reorganize and speed up MD5.
311 [Andy Polyakov <appro@fy.chalmers.se>]
314 [Richard Levitte <richard@levitte.org>]
316 *) New option -out to asn1parse to allow the parsed structure to be
317 output to a file. This is most useful when combined with the -strparse
318 option to examine the output of things like OCTET STRINGS.
321 *) Make SSL library a little more fool-proof by not requiring any longer
322 that SSL_set_{accept,connect}_state be called before
323 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
324 in many applications because usually everything *appeared* to work as
325 intended anyway -- now it really works as intended).
328 *) Move openssl.cnf out of lib/.
331 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
332 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
333 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
334 [Ralf S. Engelschall]
336 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
337 handle PKCS#7 enveloped data properly.
338 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
340 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
341 copying pointers. The cert_st handling is changed by this in
342 various ways (and thus what used to be known as ctx->default_cert
343 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
344 any longer when s->cert does not give us what we need).
345 ssl_cert_instantiate becomes obsolete by this change.
346 As soon as we've got the new code right (possibly it already is?),
347 we have solved a couple of bugs of the earlier code where s->cert
348 was used as if it could not have been shared with other SSL structures.
350 Note that using the SSL API in certain dirty ways now will result
351 in different behaviour than observed with earlier library versions:
352 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
353 does not influence s as it used to.
355 In order to clean up things more thoroughly, inside SSL_SESSION
356 we don't use CERT any longer, but a new structure SESS_CERT
357 that holds per-session data (if available); currently, this is
358 the peer's certificate chain and, for clients, the server's certificate
359 and temporary key. CERT holds only those values that can have
360 meaningful defaults in an SSL_CTX.
363 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
364 from the internal representation. Various PKCS#7 fixes: remove some
365 evil casts and set the enc_dig_alg field properly based on the signing
369 *) Allow PKCS#12 password to be set from the command line or the
370 environment. Let 'ca' get its config file name from the environment
371 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
375 *) Allow certificate policies extension to use an IA5STRING for the
376 organization field. This is contrary to the PKIX definition but
377 VeriSign uses it and IE5 only recognises this form. Document 'x509'
381 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
382 without disallowing inline assembler and the like for non-pedantic builds.
385 *) Support Borland C++ builder.
386 [Janez Jere <jj@void.si>, modified by Ulf Möller]
391 *) SHA-1 cleanups and performance enhancements.
392 [Andy Polyakov <appro@fy.chalmers.se>]
394 *) Sparc v8plus assembler for the bignum library.
395 [Andy Polyakov <appro@fy.chalmers.se>]
397 *) Accept any -xxx and +xxx compiler options in Configure.
400 *) Update HPUX configuration.
403 *) Add missing sk_<type>_unshift() function to safestack.h
404 [Ralf S. Engelschall]
406 *) New function SSL_CTX_use_certificate_chain_file that sets the
407 "extra_cert"s in addition to the certificate. (This makes sense
408 only for "PEM" format files, as chains as a whole are not
412 *) Support verify_depth from the SSL API.
413 x509_vfy.c had what can be considered an off-by-one-error:
414 Its depth (which was not part of the external interface)
415 was actually counting the number of certificates in a chain;
416 now it really counts the depth.
419 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
420 instead of X509err, which often resulted in confusing error
421 messages since the error codes are not globally unique
422 (e.g. an alleged error in ssl3_accept when a certificate
423 didn't match the private key).
425 *) New function SSL_CTX_set_session_id_context that allows to set a default
426 value (so that you don't need SSL_set_session_id_context for each
427 connection using the SSL_CTX).
430 *) OAEP decoding bug fix.
433 *) Support INSTALL_PREFIX for package builders, as proposed by
437 *) New Configure options "threads" and "no-threads". For systems
438 where the proper compiler options are known (currently Solaris
439 and Linux), "threads" is the default.
442 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
445 *) Install various scripts to $(OPENSSLDIR)/misc, not to
446 $(INSTALLTOP)/bin -- they shouldn't clutter directories
447 such as /usr/local/bin.
450 *) "make linux-shared" to build shared libraries.
451 [Niels Poppe <niels@netbox.org>]
453 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
456 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
457 extension adding in x509 utility.
460 *) Remove NOPROTO sections and error code comments.
463 *) Partial rewrite of the DEF file generator to now parse the ANSI
467 *) New Configure options --prefix=DIR and --openssldir=DIR.
470 *) Complete rewrite of the error code script(s). It is all now handled
471 by one script at the top level which handles error code gathering,
472 header rewriting and C source file generation. It should be much better
473 than the old method: it now uses a modified version of Ulf's parser to
474 read the ANSI prototypes in all header files (thus the old K&R definitions
475 aren't needed for error creation any more) and do a better job of
476 translating function codes into names. The old 'ASN1 error code imbedded
477 in a comment' is no longer necessary and it doesn't use .err files which
478 have now been deleted. Also the error code call doesn't have to appear all
479 on one line (which resulted in some large lines...).
482 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
485 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
486 0 (which usually indicates a closed connection), but continue reading.
489 *) Fix some race conditions.
492 *) Add support for CRL distribution points extension. Add Certificate
493 Policies and CRL distribution points documentation.
496 *) Move the autogenerated header file parts to crypto/opensslconf.h.
499 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
500 8 of keying material. Merlin has also confirmed interop with this fix
501 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
502 [Merlin Hughes <merlin@baltimore.ie>]
504 *) Fix lots of warnings.
505 [Richard Levitte <levitte@stacken.kth.se>]
507 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
508 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
509 [Richard Levitte <levitte@stacken.kth.se>]
511 *) Fix problems with sizeof(long) == 8.
512 [Andy Polyakov <appro@fy.chalmers.se>]
514 *) Change functions to ANSI C.
517 *) Fix typos in error codes.
518 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
520 *) Remove defunct assembler files from Configure.
523 *) SPARC v8 assembler BIGNUM implementation.
524 [Andy Polyakov <appro@fy.chalmers.se>]
526 *) Support for Certificate Policies extension: both print and set.
527 Various additions to support the r2i method this uses.
530 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
531 return a const string when you are expecting an allocated buffer.
534 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
535 types DirectoryString and DisplayText.
538 *) Add code to allow r2i extensions to access the configuration database,
539 add an LHASH database driver and add several ctx helper functions.
542 *) Fix an evil bug in bn_expand2() which caused various BN functions to
543 fail when they extended the size of a BIGNUM.
546 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
547 support typesafe stack.
550 *) Fix typo in SSL_[gs]et_options().
551 [Nils Frostberg <nils@medcom.se>]
553 *) Delete various functions and files that belonged to the (now obsolete)
554 old X509V3 handling code.
557 *) New Configure option "rsaref".
560 *) Don't auto-generate pem.h.
563 *) Introduce type-safe ASN.1 SETs.
566 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
567 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
569 *) Introduce type-safe STACKs. This will almost certainly break lots of code
570 that links with OpenSSL (well at least cause lots of warnings), but fear
571 not: the conversion is trivial, and it eliminates loads of evil casts. A
572 few STACKed things have been converted already. Feel free to convert more.
573 In the fullness of time, I'll do away with the STACK type altogether.
576 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
577 specified in <certfile> by updating the entry in the index.txt file.
578 This way one no longer has to edit the index.txt file manually for
579 revoking a certificate. The -revoke option does the gory details now.
580 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
582 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
583 `-text' option at all and this way the `-noout -text' combination was
584 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
585 [Ralf S. Engelschall]
587 *) Make sure a corresponding plain text error message exists for the
588 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
589 verify callback function determined that a certificate was revoked.
590 [Ralf S. Engelschall]
592 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
593 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
594 all available cipers including rc5, which was forgotten until now.
595 In order to let the testing shell script know which algorithms
596 are available, a new (up to now undocumented) command
597 "openssl list-cipher-commands" is used.
600 *) Bugfix: s_client occasionally would sleep in select() when
601 it should have checked SSL_pending() first.
604 *) New functions DSA_do_sign and DSA_do_verify to provide access to
605 the raw DSA values prior to ASN.1 encoding.
608 *) Tweaks to Configure
609 [Niels Poppe <niels@netbox.org>]
611 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
615 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
618 *) New config option to avoid instructions that are illegal on the 80386.
619 The default code is faster, but requires at least a 486.
622 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
623 SSL2_SERVER_VERSION (not used at all) macros, which are now the
624 same as SSL2_VERSION anyway.
627 *) New "-showcerts" option for s_client.
630 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
631 application. Various cleanups and fixes.
634 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
635 modify error routines to work internally. Add error codes and PBE init
636 to library startup routines.
639 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
640 packing functions to asn1 and evp. Changed function names and error
644 *) PKCS12 integration: and so it begins... First of several patches to
645 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
649 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
650 and display support for Thawte strong extranet extension.
653 *) Add LinuxPPC support.
654 [Jeff Dubrule <igor@pobox.org>]
656 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
657 bn_div_words in alpha.s.
658 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
660 *) Make sure the RSA OAEP test is skipped under -DRSAref because
661 OAEP isn't supported when OpenSSL is built with RSAref.
662 [Ulf Moeller <ulf@fitug.de>]
664 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
665 so they no longer are missing under -DNOPROTO.
666 [Soren S. Jorvang <soren@t.dk>]
669 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
671 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
672 doesn't work when the session is reused. Coming soon!
675 *) Fix a security hole, that allows sessions to be reused in the wrong
676 context thus bypassing client cert protection! All software that uses
677 client certs and session caches in multiple contexts NEEDS PATCHING to
678 allow session reuse! A fuller solution is in the works.
679 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
681 *) Some more source tree cleanups (removed obsolete files
682 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
683 permission on "config" script to be executable) and a fix for the INSTALL
685 [Ulf Moeller <ulf@fitug.de>]
687 *) Remove some legacy and erroneous uses of malloc, free instead of
689 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
691 *) Make rsa_oaep_test return non-zero on error.
692 [Ulf Moeller <ulf@fitug.de>]
694 *) Add support for native Solaris shared libraries. Configure
695 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
696 if someone would make that last step automatic.
697 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
699 *) ctx_size was not built with the right compiler during "make links". Fixed.
702 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
703 except NULL ciphers". This means the default cipher list will no longer
704 enable NULL ciphers. They need to be specifically enabled e.g. with
705 the string "DEFAULT:eNULL".
708 *) Fix to RSA private encryption routines: if p < q then it would
709 occasionally produce an invalid result. This will only happen with
710 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
713 *) Be less restrictive and allow also `perl util/perlpath.pl
714 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
715 because this way one can also use an interpreter named `perl5' (which is
716 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
717 installed as `perl').
718 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
720 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
721 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
723 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
724 advapi32.lib to Win32 build and change the pem test comparision
725 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
726 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
727 and crypto/des/ede_cbcm_enc.c.
730 *) DES quad checksum was broken on big-endian architectures. Fixed.
733 *) Comment out two functions in bio.h that aren't implemented. Fix up the
734 Win32 test batch file so it (might) work again. The Win32 test batch file
735 is horrible: I feel ill....
738 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
739 in e_os.h. Audit of header files to check ANSI and non ANSI
740 sections: 10 functions were absent from non ANSI section and not exported
741 from Windows DLLs. Fixed up libeay.num for new functions.
744 *) Make `openssl version' output lines consistent.
745 [Ralf S. Engelschall]
747 *) Fix Win32 symbol export lists for BIO functions: Added
748 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
749 to ms/libeay{16,32}.def.
750 [Ralf S. Engelschall]
752 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
753 fine under Unix and passes some trivial tests I've now added. But the
754 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
755 added to make sure no one expects that this stuff really works in the
756 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
757 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
759 [Ralf S. Engelschall]
761 *) Fix the generation of two part addresses in perl.
762 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
764 *) Add config entry for Linux on MIPS.
765 [John Tobey <jtobey@channel1.com>]
767 *) Make links whenever Configure is run, unless we are on Windoze.
770 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
771 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
775 *) Add a useful kludge to allow package maintainers to specify compiler and
776 other platforms details on the command line without having to patch the
777 Configure script everytime: One now can use ``perl Configure
778 <id>:<details>'', i.e. platform ids are allowed to have details appended
779 to them (seperated by colons). This is treated as there would be a static
780 pre-configured entry in Configure's %table under key <id> with value
781 <details> and ``perl Configure <id>'' is called. So, when you want to
782 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
783 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
784 now, which overrides the FreeBSD-elf entry on-the-fly.
785 [Ralf S. Engelschall]
787 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
790 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
791 on the `perl Configure ...' command line. This way one can compile
792 OpenSSL libraries with Position Independent Code (PIC) which is needed
793 for linking it into DSOs.
794 [Ralf S. Engelschall]
796 *) Remarkably, export ciphers were totally broken and no-one had noticed!
800 *) Cleaned up the LICENSE document: The official contact for any license
801 questions now is the OpenSSL core team under openssl-core@openssl.org.
802 And add a paragraph about the dual-license situation to make sure people
803 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
804 to the OpenSSL toolkit.
805 [Ralf S. Engelschall]
807 *) General source tree makefile cleanups: Made `making xxx in yyy...'
808 display consistent in the source tree and replaced `/bin/rm' by `rm'.
809 Additonally cleaned up the `make links' target: Remove unnecessary
810 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
811 to speed processing and no longer clutter the display with confusing
812 stuff. Instead only the actually done links are displayed.
813 [Ralf S. Engelschall]
815 *) Permit null encryption ciphersuites, used for authentication only. It used
816 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
817 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
821 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
822 signed attributes when verifying signatures (this would break them),
823 the detached data encoding was wrong and public keys obtained using
824 X509_get_pubkey() weren't freed.
827 *) Add text documentation for the BUFFER functions. Also added a work around
828 to a Win95 console bug. This was triggered by the password read stuff: the
829 last character typed gets carried over to the next fread(). If you were
830 generating a new cert request using 'req' for example then the last
831 character of the passphrase would be CR which would then enter the first
835 *) Added the new `Includes OpenSSL Cryptography Software' button as
836 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
837 button and can be used by applications based on OpenSSL to show the
838 relationship to the OpenSSL project.
839 [Ralf S. Engelschall]
841 *) Remove confusing variables in function signatures in files
842 ssl/ssl_lib.c and ssl/ssl.h.
843 [Lennart Bong <lob@kulthea.stacken.kth.se>]
845 *) Don't install bss_file.c under PREFIX/include/
846 [Lennart Bong <lob@kulthea.stacken.kth.se>]
848 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
849 functions that return function pointers and has support for NT specific
850 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
851 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
852 unsigned to signed types: this was killing the Win32 compile.
855 *) Add new certificate file to stack functions,
856 SSL_add_dir_cert_subjects_to_stack() and
857 SSL_add_file_cert_subjects_to_stack(). These largely supplant
858 SSL_load_client_CA_file(), and can be used to add multiple certs easily
859 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
860 This means that Apache-SSL and similar packages don't have to mess around
861 to add as many CAs as they want to the preferred list.
864 *) Experiment with doxygen documentation. Currently only partially applied to
866 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
867 openssl.doxy as the configuration file.
870 *) Get rid of remaining C++-style comments which strict C compilers hate.
871 [Ralf S. Engelschall, pointed out by Carlos Amengual]
873 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
874 compiled in by default: it has problems with large keys.
877 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
878 DH private keys and/or callback functions which directly correspond to
879 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
880 is needed for applications which have to configure certificates on a
881 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
883 For the RSA certificate situation is makes no difference, but
884 for the DSA certificate situation this fixes the "no shared cipher"
885 problem where the OpenSSL cipher selection procedure failed because the
886 temporary keys were not overtaken from the context and the API provided
887 no way to reconfigure them.
888 The new functions now let applications reconfigure the stuff and they
889 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
890 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
891 non-public-API function ssl_cert_instantiate() is used as a helper
892 function and also to reduce code redundancy inside ssl_rsa.c.
893 [Ralf S. Engelschall]
895 *) Move s_server -dcert and -dkey options out of the undocumented feature
896 area because they are useful for the DSA situation and should be
897 recognized by the users.
898 [Ralf S. Engelschall]
900 *) Fix the cipher decision scheme for export ciphers: the export bits are
901 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
902 SSL_EXP_MASK. So, the original variable has to be used instead of the
903 already masked variable.
904 [Richard Levitte <levitte@stacken.kth.se>]
906 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
907 [Richard Levitte <levitte@stacken.kth.se>]
909 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
910 from `int' to `unsigned int' because it's a length and initialized by
911 EVP_DigestFinal() which expects an `unsigned int *'.
912 [Richard Levitte <levitte@stacken.kth.se>]
914 *) Don't hard-code path to Perl interpreter on shebang line of Configure
915 script. Instead use the usual Shell->Perl transition trick.
916 [Ralf S. Engelschall]
918 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
919 (in addition to RSA certificates) to match the behaviour of `openssl dsa
920 -noout -modulus' as it's already the case for `openssl rsa -noout
921 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
922 currently the public key is printed (a decision which was already done by
923 `openssl dsa -modulus' in the past) which serves a similar purpose.
924 Additionally the NO_RSA no longer completely removes the whole -modulus
925 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
927 [Ralf S. Engelschall]
929 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
930 BIO. See the source (crypto/evp/bio_ok.c) for more info.
931 [Arne Ansper <arne@ats.cyber.ee>]
933 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
934 to be added. Now both 'req' and 'ca' can use new objects defined in the
938 *) Add cool BIO that does syslog (or event log on NT).
939 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
941 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
942 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
943 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
944 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
947 *) Add preliminary config info for new extension code.
950 *) Make RSA_NO_PADDING really use no padding.
951 [Ulf Moeller <ulf@fitug.de>]
953 *) Generate errors when private/public key check is done.
956 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
957 for some CRL extensions and new objects added.
960 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
961 key usage extension and fuller support for authority key id.
964 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
965 padding method for RSA, which is recommended for new applications in PKCS
966 #1 v2.0 (RFC 2437, October 1998).
967 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
968 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
969 against Bleichbacher's attack on RSA.
970 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
973 *) Updates to the new SSL compression code
974 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
976 *) Fix so that the version number in the master secret, when passed
977 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
978 (because the server will not accept higher), that the version number
979 is 0x03,0x01, not 0x03,0x00
980 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
982 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
983 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
984 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
987 *) Support for RAW extensions where an arbitrary extension can be
988 created by including its DER encoding. See apps/openssl.cnf for
992 *) Make sure latest Perl versions don't interpret some generated C array
993 code as Perl array code in the crypto/err/err_genc.pl script.
994 [Lars Weber <3weber@informatik.uni-hamburg.de>]
996 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
997 not many people have the assembler. Various Win32 compilation fixes and
998 update to the INSTALL.W32 file with (hopefully) more accurate Win32
1002 *) Modify configure script 'Configure' to automatically create crypto/date.h
1003 file under Win32 and also build pem.h from pem.org. New script
1004 util/mkfiles.pl to create the MINFO file on environments that can't do a
1005 'make files': perl util/mkfiles.pl >MINFO should work.
1008 *) Major rework of DES function declarations, in the pursuit of correctness
1009 and purity. As a result, many evil casts evaporated, and some weirdness,
1010 too. You may find this causes warnings in your code. Zapping your evil
1011 casts will probably fix them. Mostly.
1014 *) Fix for a typo in asn1.h. Bug fix to object creation script
1015 obj_dat.pl. It considered a zero in an object definition to mean
1016 "end of object": none of the objects in objects.h have any zeros
1017 so it wasn't spotted.
1018 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
1020 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
1021 Masking (CBCM). In the absence of test vectors, the best I have been able
1022 to do is check that the decrypt undoes the encrypt, so far. Send me test
1023 vectors if you have them.
1026 *) Correct calculation of key length for export ciphers (too much space was
1027 allocated for null ciphers). This has not been tested!
1030 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
1031 message is now correct (it understands "crypto" and "ssl" on its
1032 command line). There is also now an "update" option. This will update
1033 the util/ssleay.num and util/libeay.num files with any new functions.
1035 perl util/mkdef.pl crypto ssl update
1036 it will update them.
1039 *) Overhauled the Perl interface (perl/*):
1040 - ported BN stuff to OpenSSL's different BN library
1041 - made the perl/ source tree CVS-aware
1042 - renamed the package from SSLeay to OpenSSL (the files still contain
1043 their history because I've copied them in the repository)
1044 - removed obsolete files (the test scripts will be replaced
1045 by better Test::Harness variants in the future)
1046 [Ralf S. Engelschall]
1048 *) First cut for a very conservative source tree cleanup:
1049 1. merge various obsolete readme texts into doc/ssleay.txt
1050 where we collect the old documents and readme texts.
1051 2. remove the first part of files where I'm already sure that we no
1052 longer need them because of three reasons: either they are just temporary
1053 files which were left by Eric or they are preserved original files where
1054 I've verified that the diff is also available in the CVS via "cvs diff
1055 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
1056 the crypto/md/ stuff).
1057 [Ralf S. Engelschall]
1059 *) More extension code. Incomplete support for subject and issuer alt
1060 name, issuer and authority key id. Change the i2v function parameters
1061 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
1062 what that's for :-) Fix to ASN1 macro which messed up
1063 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
1066 *) Preliminary support for ENUMERATED type. This is largely copied from the
1070 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
1071 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1073 *) Make sure `make rehash' target really finds the `openssl' program.
1074 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1076 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
1077 like to hear about it if this slows down other processors.
1080 *) Add CygWin32 platform information to Configure script.
1081 [Alan Batie <batie@aahz.jf.intel.com>]
1083 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
1084 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
1086 *) New program nseq to manipulate netscape certificate sequences
1089 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
1093 *) Fixes to BN code. Previously the default was to define BN_RECURSION
1094 but the BN code had some problems that would cause failures when
1095 doing certificate verification and some other functions.
1096 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1098 *) Add ASN1 and PEM code to support netscape certificate sequences.
1101 *) Add ASN1 and PEM code to support netscape certificate sequences.
1104 *) Add several PKIX and private extended key usage OIDs.
1107 *) Modify the 'ca' program to handle the new extension code. Modify
1108 openssl.cnf for new extension format, add comments.
1111 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
1112 and add a sample to openssl.cnf so req -x509 now adds appropriate
1116 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
1117 error code, add initial support to X509_print() and x509 application.
1120 *) Takes a deep breath and start addding X509 V3 extension support code. Add
1121 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
1122 stuff is currently isolated and isn't even compiled yet.
1125 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
1126 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
1127 Removed the versions check from X509 routines when loading extensions:
1128 this allows certain broken certificates that don't set the version
1129 properly to be processed.
1132 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
1133 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
1134 can still be regenerated with "make depend".
1137 *) Spelling mistake in C version of CAST-128.
1138 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
1140 *) Changes to the error generation code. The perl script err-code.pl
1141 now reads in the old error codes and retains the old numbers, only
1142 adding new ones if necessary. It also only changes the .err files if new
1143 codes are added. The makefiles have been modified to only insert errors
1144 when needed (to avoid needlessly modifying header files). This is done
1145 by only inserting errors if the .err file is newer than the auto generated
1146 C file. To rebuild all the error codes from scratch (the old behaviour)
1147 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
1148 or delete all the .err files.
1151 *) CAST-128 was incorrectly implemented for short keys. The C version has
1152 been fixed, but is untested. The assembler versions are also fixed, but
1153 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
1154 to regenerate it if needed.
1155 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
1156 Hagino <itojun@kame.net>]
1158 *) File was opened incorrectly in randfile.c.
1159 [Ulf Möller <ulf@fitug.de>]
1161 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
1162 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
1163 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
1164 al: it's just almost always a UTCTime. Note this patch adds new error
1165 codes so do a "make errors" if there are problems.
1168 *) Correct Linux 1 recognition in config.
1169 [Ulf Möller <ulf@fitug.de>]
1171 *) Remove pointless MD5 hash when using DSA keys in ca.
1172 [Anonymous <nobody@replay.com>]
1174 *) Generate an error if given an empty string as a cert directory. Also
1175 generate an error if handed NULL (previously returned 0 to indicate an
1176 error, but didn't set one).
1177 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
1179 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
1182 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
1183 parameters. This was causing a warning which killed off the Win32 compile.
1186 *) Remove C++ style comments from crypto/bn/bn_local.h.
1187 [Neil Costigan <neil.costigan@celocom.com>]
1189 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
1190 based on a text string, looking up short and long names and finally
1191 "dot" format. The "dot" format stuff didn't work. Added new function
1192 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
1193 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
1194 OID is not part of the table.
1197 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
1198 X509_LOOKUP_by_alias().
1201 *) Sort openssl functions by name.
1204 *) Get the gendsa program working (hopefully) and add it to app list. Remove
1205 encryption from sample DSA keys (in case anyone is interested the password
1209 *) Make _all_ *_free functions accept a NULL pointer.
1210 [Frans Heymans <fheymans@isaserver.be>]
1212 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
1214 [Anonymous <nobody@replay.com>]
1216 *) s_server should send the CAfile as acceptable CAs, not its own cert.
1217 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1219 *) Don't blow it for numeric -newkey arguments to apps/req.
1220 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1222 *) Temp key "for export" tests were wrong in s3_srvr.c.
1223 [Anonymous <nobody@replay.com>]
1225 *) Add prototype for temp key callback functions
1226 SSL_CTX_set_tmp_{rsa,dh}_callback().
1229 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
1230 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
1233 *) X509_name_add_entry() freed the wrong thing after an error.
1234 [Arne Ansper <arne@ats.cyber.ee>]
1236 *) rsa_eay.c would attempt to free a NULL context.
1237 [Arne Ansper <arne@ats.cyber.ee>]
1239 *) BIO_s_socket() had a broken should_retry() on Windoze.
1240 [Arne Ansper <arne@ats.cyber.ee>]
1242 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
1243 [Arne Ansper <arne@ats.cyber.ee>]
1245 *) Make sure the already existing X509_STORE->depth variable is initialized
1246 in X509_STORE_new(), but document the fact that this variable is still
1247 unused in the certificate verification process.
1248 [Ralf S. Engelschall]
1250 *) Fix the various library and apps files to free up pkeys obtained from
1251 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
1254 *) Fix reference counting in X509_PUBKEY_get(). This makes
1255 demos/maurice/example2.c work, amongst others, probably.
1256 [Steve Henson and Ben Laurie]
1258 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
1259 `openssl' and second, the shortcut symlinks for the `openssl <command>'
1260 are no longer created. This way we have a single and consistent command
1261 line interface `openssl <command>', similar to `cvs <command>'.
1262 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
1264 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
1265 BIT STRING wrapper always have zero unused bits.
1268 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
1271 *) Make the top-level INSTALL documentation easier to understand.
1274 *) Makefiles updated to exit if an error occurs in a sub-directory
1275 make (including if user presses ^C) [Paul Sutton]
1277 *) Make Montgomery context stuff explicit in RSA data structure.
1280 *) Fix build order of pem and err to allow for generated pem.h.
1283 *) Fix renumbering bug in X509_NAME_delete_entry().
1286 *) Enhanced the err-ins.pl script so it makes the error library number
1287 global and can add a library name. This is needed for external ASN1 and
1288 other error libraries.
1291 *) Fixed sk_insert which never worked properly.
1294 *) Fix ASN1 macros so they can handle indefinite length construted
1295 EXPLICIT tags. Some non standard certificates use these: they can now
1299 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
1300 into a single doc/ssleay.txt bundle. This way the information is still
1301 preserved but no longer messes up this directory. Now it's new room for
1302 the new set of documenation files.
1303 [Ralf S. Engelschall]
1305 *) SETs were incorrectly DER encoded. This was a major pain, because they
1306 shared code with SEQUENCEs, which aren't coded the same. This means that
1307 almost everything to do with SETs or SEQUENCEs has either changed name or
1308 number of arguments.
1309 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
1311 *) Fix test data to work with the above.
1314 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
1315 was already fixed by Eric for 0.9.1 it seems.
1316 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
1318 *) Autodetect FreeBSD3.
1321 *) Fix various bugs in Configure. This affects the following platforms:
1325 unixware-2.0-pentium
1329 *) Eliminate generated files from CVS. Reorder tests to regenerate files
1330 before they are needed.
1333 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
1337 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
1339 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
1340 changed SSLeay to OpenSSL in version strings.
1341 [Ralf S. Engelschall]
1343 *) Some fixups to the top-level documents.
1346 *) Fixed the nasty bug where rsaref.h was not found under compile-time
1347 because the symlink to include/ was missing.
1348 [Ralf S. Engelschall]
1350 *) Incorporated the popular no-RSA/DSA-only patches
1351 which allow to compile a RSA-free SSLeay.
1352 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
1354 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
1355 when "ssleay" is still not found.
1356 [Ralf S. Engelschall]
1358 *) Added more platforms to Configure: Cray T3E, HPUX 11,
1359 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
1361 *) Updated the README file.
1362 [Ralf S. Engelschall]
1364 *) Added various .cvsignore files in the CVS repository subdirs
1365 to make a "cvs update" really silent.
1366 [Ralf S. Engelschall]
1368 *) Recompiled the error-definition header files and added
1369 missing symbols to the Win32 linker tables.
1370 [Ralf S. Engelschall]
1372 *) Cleaned up the top-level documents;
1373 o new files: CHANGES and LICENSE
1374 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
1375 o merged COPYRIGHT into LICENSE
1376 o removed obsolete TODO file
1377 o renamed MICROSOFT to INSTALL.W32
1378 [Ralf S. Engelschall]
1380 *) Removed dummy files from the 0.9.1b source tree:
1381 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
1382 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
1383 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
1384 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
1385 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
1386 [Ralf S. Engelschall]
1388 *) Added various platform portability fixes.
1391 *) The Genesis of the OpenSSL rpject:
1392 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
1393 Young and Tim J. Hudson created while they were working for C2Net until
1395 [The OpenSSL Project]
1398 Changes between 0.9.0b and 0.9.1b [not released]
1400 *) Updated a few CA certificates under certs/
1403 *) Changed some BIGNUM api stuff.
1406 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
1407 DGUX x86, Linux Alpha, etc.
1410 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
1411 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
1415 *) Add -strparse option to asn1pars program which parses nested
1417 [Dr Stephen Henson <shenson@bigfoot.com>]
1419 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
1422 *) DSA fix for "ca" program.
1425 *) Added "-genkey" option to "dsaparam" program.
1428 *) Added RIPE MD160 (rmd160) message digest.
1431 *) Added -a (all) option to "ssleay version" command.
1434 *) Added PLATFORM define which is the id given to Configure.
1437 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
1440 *) Extended the ASN.1 parser routines.
1443 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
1446 *) Added a BN_CTX to the BN library.
1449 *) Fixed the weak key values in DES library
1452 *) Changed API in EVP library for cipher aliases.
1455 *) Added support for RC2/64bit cipher.
1458 *) Converted the lhash library to the crypto/mem.c functions.
1461 *) Added more recognized ASN.1 object ids.
1464 *) Added more RSA padding checks for SSL/TLS.
1467 *) Added BIO proxy/filter functionality.
1470 *) Added extra_certs to SSL_CTX which can be used
1471 send extra CA certificates to the client in the CA cert chain sending
1472 process. It can be configured with SSL_CTX_add_extra_chain_cert().
1475 *) Now Fortezza is denied in the authentication phase because
1476 this is key exchange mechanism is not supported by SSLeay at all.
1479 *) Additional PKCS1 checks.
1482 *) Support the string "TLSv1" for all TLS v1 ciphers.
1485 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
1486 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
1489 *) Fixed a few memory leaks.
1492 *) Fixed various code and comment typos.
1495 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
1496 bytes sent in the client random.
1497 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob