5 Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
7 *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
10 *) Use separate DRBG fields for internal and external flags. New function
11 FIPS_drbg_health_check() to perform on demand health checking. Add
12 generation tests to fips_test_suite with reduced health check interval to
13 demonstrate periodic health checking. Add "nodh" option to
14 fips_test_suite to skip very slow DH test.
17 *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
21 *) More extensive health check for DRBG checking many more failure modes.
22 New function FIPS_selftest_drbg_all() to handle every possible DRBG
23 combination: call this in fips_test_suite.
26 *) Add support for Dual EC DRBG from SP800-90. Update DRBG algorithm test
27 and POST to handle Dual EC cases.
30 *) Add support for canonical generation of DSA parameter 'g'. See
33 *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
34 POST to handle HMAC cases.
37 *) Add functions FIPS_module_version() and FIPS_module_version_text()
38 to return numberical and string versions of the FIPS module number.
41 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
42 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implmeneted
43 outside the validated module in the FIPS capable OpenSSL.
46 *) Minor change to DRBG entropy callback semantics. In some cases
47 there is no mutiple of the block length between min_len and
48 max_len. Allow the callback to return more than max_len bytes
49 of entropy but discard any extra: it is the callback's responsibility
50 to ensure that the extra data discarded does not impact the
51 requested amount of entropy.
54 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
55 information in FIPS186-3, SP800-57 and SP800-131A.
58 *) CCM support via EVP. Interface is very similar to GCM case except we
59 must supply all data in one chunk (i.e. no update, final) and the
60 message length must be supplied if AAD is used. Add algorithm test
64 *) Initial version of POST overhaul. Add POST callback to allow the status
65 of POST to be monitored and/or failures induced. Modify fips_test_suite
66 to use callback. Always run all selftests even if one fails.
69 *) XTS support including algorithm test driver in the fips_gcmtest program.
70 Note: this does increase the maximum key length from 32 to 64 bytes but
71 there should be no binary compatibility issues as existing applications
72 will never use XTS mode.
75 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
76 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
77 performs algorithm blocking for unapproved PRNG types. Also do not
78 set PRNG type in FIPS_mode_set(): leave this to the application.
79 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
80 the standard OpenSSL PRNG: set additional data to a date time vector.
83 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
84 This shouldn't present any incompatibility problems because applications
85 shouldn't be using these directly and any that are will need to rethink
86 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
89 *) Extensive self tests and health checking required by SP800-90 DRBG.
90 Remove strength parameter from FIPS_drbg_instantiate and always
91 instantiate at maximum supported strength.
94 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
97 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
100 *) New function DH_compute_key_padded() to compute a DH key and pad with
101 leading zeroes if needed: this complies with SP800-56A et al.
104 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
105 anything, incomplete, subject to change and largely untested at present.
108 *) Modify fipscanisteronly build option to only build the necessary object
109 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
112 *) Add experimental option FIPSSYMS to give all symbols in
113 fipscanister.o and FIPS or fips prefix. This will avoid
114 conflicts with future versions of OpenSSL. Add perl script
115 util/fipsas.pl to preprocess assembly language source files
116 and rename any affected symbols.
119 *) Add selftest checks and algorithm block of non-fips algorithms in
120 FIPS mode. Remove DES2 from selftests.
123 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
124 return internal method without any ENGINE dependencies. Add new
125 tiny fips sign and verify functions.
128 *) New build option no-ec2m to disable characteristic 2 code.
131 *) New build option "fipscanisteronly". This only builds fipscanister.o
132 and (currently) associated fips utilities. Uses the file Makefile.fips
133 instead of Makefile.org as the prototype.
136 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
137 Update fips_gcmtest to use IV generator.
140 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
141 setting output buffer to NULL. The *Final function must be
142 called although it will not retrieve any additional data. The tag
143 can be set or retrieved with a ctrl. The IV length is by default 12
144 bytes (96 bits) but can be set to an alternative value. If the IV
145 length exceeds the maximum IV length (currently 16 bytes) it cannot be
149 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
150 underlying do_cipher function handles all cipher semantics itself
151 including padding and finalisation. This is useful if (for example)
152 an ENGINE cipher handles block padding itself. The behaviour of
153 do_cipher is subtly changed if this flag is set: the return value
154 is the number of characters written to the output buffer (zero is
155 no longer an error code) or a negative error code. Also if the
156 input buffer is NULL and length 0 finalisation should be performed.
159 *) If a candidate issuer certificate is already part of the constructed
160 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
163 *) Improve forward-security support: add functions
165 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
166 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
168 for use by SSL/TLS servers; the callback function will be called whenever a
169 new session is created, and gets to decide whether the session may be
170 cached to make it resumable (return 0) or not (return 1). (As by the
171 SSL/TLS protocol specifications, the session_id sent by the server will be
172 empty to indicate that the session is not resumable; also, the server will
173 not generate RFC 4507 (RFC 5077) session tickets.)
175 A simple reasonable callback implementation is to return is_forward_secure.
176 This parameter will be set to 1 or 0 depending on the ciphersuite selected
177 by the SSL/TLS server library, indicating whether it can provide forward
179 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
181 *) Add Next Protocol Negotiation,
182 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
183 disabled with a no-npn flag to config or Configure. Code donated
185 [Adam Langley <agl@google.com> and Ben Laurie]
187 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
188 all platforms. Move ssize_t definition from e_os.h to the public
189 header file e_os2.h as it now appears in public header file cms.h
192 *) New function OPENSSL_gmtime_diff to find the difference in days
193 and seconds between two tm structures. This will be used to provide
194 additional functionality for ASN1_TIME.
197 *) New -sigopt option to the ca, req and x509 utilities. Additional
198 signature parameters can be passed using this option and in
202 *) Add RSA PSS signing function. This will generate and set the
203 appropriate AlgorithmIdentifiers for PSS based on those in the
204 corresponding EVP_MD_CTX structure. No application support yet.
207 *) Support for companion algorithm specific ASN1 signing routines.
208 New function ASN1_item_sign_ctx() signs a pre-initialised
209 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
210 the appropriate parameters.
213 *) Add new algorithm specific ASN1 verification initialisation function
214 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
215 handling will be the same no matter what EVP_PKEY_METHOD is used.
216 Add a PSS handler to support verification of PSS signatures: checked
217 against a number of sample certificates.
220 *) Add signature printing for PSS. Add PSS OIDs.
221 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
223 *) Add algorithm specific signature printing. An individual ASN1 method
224 can now print out signatures instead of the standard hex dump.
226 More complex signatures (e.g. PSS) can print out more meaningful
227 information. Include DSA version that prints out the signature
231 *) Add -trusted_first option which attempts to find certificates in the
232 trusted store even if an untrusted chain is also supplied.
235 *) Initial experimental support for explicitly trusted non-root CAs.
236 OpenSSL still tries to build a complete chain to a root but if an
237 intermediate CA has a trust setting included that is used. The first
238 setting is used: whether to trust or reject.
241 *) New -verify_name option in command line utilities to set verification
245 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
246 Add CMAC pkey methods.
249 *) Experiemental regnegotiation in s_server -www mode. If the client
250 browses /reneg connection is renegotiated. If /renegcert it is
251 renegotiated requesting a certificate.
254 *) Add an "external" session cache for debugging purposes to s_server. This
255 should help trace issues which normally are only apparent in deployed
256 multi-process servers.
259 *) Experiemental password based recipient info support for CMS library:
260 implementing RFC3211.
263 *) Split password based encryption into PBES2 and PBKDF2 functions. This
264 neatly separates the code into cipher and PBE sections and is required
265 for some algorithms that split PBES2 into separate pieces (such as
269 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
270 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
271 BIO_set_cipher() and some obscure PEM functions were changed so they
272 can now return an error. The RAND changes required a change to the
273 RAND_METHOD structure.
276 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
277 a gcc attribute to warn if the result of a function is ignored. This
278 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
279 whose return value is often ignored.
282 Changes between 1.0.0e and 1.0.1 [xx XXX xxxx]
284 *) Session-handling fixes:
285 - Fix handling of connections that are resuming with a session ID,
286 but also support Session Tickets.
287 - Fix a bug that suppressed issuing of a new ticket if the client
288 presented a ticket with an expired session.
289 - Try to set the ticket lifetime hint to something reasonable.
290 - Make tickets shorter by excluding irrelevant information.
291 - On the client side, don't ignore renewed tickets.
292 [Adam Langley, Bodo Moeller (Google)]
294 *) Fix PSK session representation.
297 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
299 This work was sponsored by Intel.
302 *) Add GCM support to TLS library. Some custom code is needed to split
303 the IV between the fixed (from PRF) and explicit (from TLS record)
304 portions. This adds all GCM ciphersuites supported by RFC5288 and
305 RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
306 add a special AESGCM string for GCM only.
309 *) Expand range of ctrls for AES GCM. Permit setting invocation
310 field on decrypt and retrieval of invocation field only on encrypt.
313 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
314 As required by RFC5289 these ciphersuites cannot be used if for
315 versions of TLS earlier than 1.2.
318 *) For FIPS capable OpenSSL interpret a NULL default public key method
319 as unset and return the appopriate default but do *not* set the default.
320 This means we can return the appopriate method in applications that
321 swicth between FIPS and non-FIPS modes.
324 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
325 ENGINE is used then we cannot handle that in the FIPS module so we
326 keep original code iff non-FIPS operations are allowed.
329 *) Add -attime option to openssl verify.
330 [Peter Eckersley <pde@eff.org> and Ben Laurie]
332 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
335 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
336 FIPS EC methods unconditionally for now.
339 *) New build option no-ec2m to disable characteristic 2 code.
342 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
343 all cases can be covered as some introduce binary incompatibilities.
346 *) Redirect RSA operations to FIPS module including keygen,
347 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
350 *) Add similar low level API blocking to ciphers.
353 *) Low level digest APIs are not approved in FIPS mode: any attempt
354 to use these will cause a fatal error. Applications that *really* want
355 to use them can use the private_* version instead.
358 *) Redirect cipher operations to FIPS module for FIPS builds.
361 *) Redirect digest operations to FIPS module for FIPS builds.
364 *) Update build system to add "fips" flag which will link in fipscanister.o
365 for static and shared library builds embedding a signature if needed.
368 *) Output TLS supported curves in preference order instead of numerical
369 order. This is currently hardcoded for the highest order curves first.
370 This should be configurable so applications can judge speed vs strength.
373 *) Add TLS v1.2 server support for client authentication.
376 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
380 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
381 FIPS modules versions.
384 *) Add TLS v1.2 client side support for client authentication. Keep cache
385 of handshake records longer as we don't know the hash algorithm to use
386 until after the certificate request message is received.
389 *) Initial TLS v1.2 client support. Add a default signature algorithms
390 extension including all the algorithms we support. Parse new signature
391 format in client key exchange. Relax some ECC signing restrictions for
392 TLS v1.2 as indicated in RFC5246.
395 *) Add server support for TLS v1.2 signature algorithms extension. Switch
396 to new signature format when needed using client digest preference.
397 All server ciphersuites should now work correctly in TLS v1.2. No client
398 support yet and no support for client certificates.
401 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
402 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
403 ciphersuites. At present only RSA key exchange ciphersuites work with
404 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
405 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
406 and version checking.
409 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
410 with this defined it will not be affected by any changes to ssl internal
411 structures. Add several utility functions to allow openssl application
412 to work with OPENSSL_NO_SSL_INTERN defined.
416 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
418 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
421 *) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
422 elliptic curve NIST-P224 with constant-time single point multiplication on
423 typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
424 (while EC_GROUP_new_curve_GFp() currently won't and prefers the more
425 flexible implementations).
427 The implementation requires support for the nonstandard type __uint128_t,
428 and so is disabled by default. To include this in your build of OpenSSL,
429 use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
430 and run "make depend" (or "make update").
431 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
433 *) Permit abbreviated handshakes when renegotiating using the function
434 SSL_renegotiate_abbreviated().
435 [Robin Seggelmann <seggelmann@fh-muenster.de>]
437 *) Add call to ENGINE_register_all_complete() to
438 ENGINE_load_builtin_engines(), so some implementations get used
439 automatically instead of needing explicit application support.
442 *) Add support for TLS key exporter as described in RFC5705.
443 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
445 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
446 a few changes are required:
448 Add SSL_OP_NO_TLSv1_1 flag.
450 Update version checking logic to handle version 1.1.
451 Add explicit IV handling (ported from DTLS code).
452 Add command line options to s_client/s_server.
455 Changes between 1.0.0d and 1.0.0e [xx XXX xxxx]
457 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
458 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
459 [Kaspar Brand <ossl@velox.ch>]
461 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
462 for multi-threaded use of ECDH. (CVE-2011-3210)
463 [Adam Langley (Google)]
465 *) Fix x509_name_ex_d2i memory leak on bad inputs.
468 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
469 signature public key algorithm by using OID xref utilities instead.
470 Before this you could only use some ECC ciphersuites with SHA1 only.
473 *) Add protection against ECDSA timing attacks as mentioned in the paper
474 by Billy Bob Brumley and Nicola Tuveri, see:
476 http://eprint.iacr.org/2011/232.pdf
478 [Billy Bob Brumley and Nicola Tuveri]
480 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
482 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
483 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
485 *) Fix bug in string printing code: if *any* escaping is enabled we must
486 escape the escape character (backslash) or the resulting string is
490 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
492 *) Disable code workaround for ancient and obsolete Netscape browsers
493 and servers: an attacker can use it in a ciphersuite downgrade attack.
494 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
497 *) Fixed J-PAKE implementation error, originally discovered by
498 Sebastien Martini, further info and confirmation from Stefan
499 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
502 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
504 *) Fix extension code to avoid race conditions which can result in a buffer
505 overrun vulnerability: resumed sessions must not be modified as they can
506 be shared by multiple threads. CVE-2010-3864
509 *) Fix WIN32 build system to correctly link an ENGINE directory into
513 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
515 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
517 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
519 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
521 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
522 context. The operation can be customised via the ctrl mechanism in
523 case ENGINEs want to include additional functionality.
526 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
529 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
530 output hashes compatible with older versions of OpenSSL.
531 [Willy Weisz <weisz@vcpc.univie.ac.at>]
533 *) Fix compression algorithm handling: if resuming a session use the
534 compression algorithm of the resumed session instead of determining
535 it from client hello again. Don't allow server to change algorithm.
538 *) Add load_crls() function to apps tidying load_certs() too. Add option
539 to verify utility to allow additional CRLs to be included.
542 *) Update OCSP request code to permit adding custom headers to the request:
543 some responders need this.
546 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
548 [Julia Lawall <julia@diku.dk>]
550 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
551 needlessly dereferenced structures, used obsolete functions and
552 didn't handle all updated verify codes correctly.
555 *) Disable MD2 in the default configuration.
558 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
559 indicate the initial BIO being pushed or popped. This makes it possible
560 to determine whether the BIO is the one explicitly called or as a result
561 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
562 it handles reference counts correctly and doesn't zero out the I/O bio
563 when it is not being explicitly popped. WARNING: applications which
564 included workarounds for the old buggy behaviour will need to be modified
565 or they could free up already freed BIOs.
568 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
569 renaming to all platforms (within the 0.9.8 branch, this was
570 done conditionally on Netware platforms to avoid a name clash).
571 [Guenter <lists@gknw.net>]
573 *) Add ECDHE and PSK support to DTLS.
574 [Michael Tuexen <tuexen@fh-muenster.de>]
576 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
580 *) Add "missing" function EVP_MD_flags() (without this the only way to
581 retrieve a digest flags is by accessing the structure directly. Update
582 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
583 or cipher is registered as in the "from" argument. Print out all
584 registered digests in the dgst usage message instead of manually
585 attempting to work them out.
588 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
589 this allows the use of compression and extensions. Change default cipher
590 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
591 by default unless an application cipher string requests it.
594 *) Alter match criteria in PKCS12_parse(). It used to try to use local
595 key ids to find matching certificates and keys but some PKCS#12 files
596 don't follow the (somewhat unwritten) rules and this strategy fails.
597 Now just gather all certificates together and the first private key
598 then look for the first certificate that matches the key.
601 *) Support use of registered digest and cipher names for dgst and cipher
602 commands instead of having to add each one as a special case. So now
609 openssl dgst -sha256 foo
611 and this works for ENGINE based algorithms too.
615 *) Update Gost ENGINE to support parameter files.
616 [Victor B. Wagner <vitus@cryptocom.ru>]
618 *) Support GeneralizedTime in ca utility.
619 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
621 *) Enhance the hash format used for certificate directory links. The new
622 form uses the canonical encoding (meaning equivalent names will work
623 even if they aren't identical) and uses SHA1 instead of MD5. This form
624 is incompatible with the older format and as a result c_rehash should
625 be used to rebuild symbolic links.
628 *) Make PKCS#8 the default write format for private keys, replacing the
629 traditional format. This form is standardised, more secure and doesn't
630 include an implicit MD5 dependency.
633 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
634 committed to OpenSSL should pass this lot as a minimum.
637 *) Add session ticket override functionality for use by EAP-FAST.
638 [Jouni Malinen <j@w1.fi>]
640 *) Modify HMAC functions to return a value. Since these can be implemented
641 in an ENGINE errors can occur.
644 *) Type-checked OBJ_bsearch_ex.
647 *) Type-checked OBJ_bsearch. Also some constification necessitated
648 by type-checking. Still to come: TXT_DB, bsearch(?),
649 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
653 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
654 seconds to a tm structure directly, instead of going through OS
655 specific date routines. This avoids any issues with OS routines such
656 as the year 2038 bug. New *_adj() functions for ASN1 time structures
657 and X509_time_adj_ex() to cover the extended range. The existing
658 X509_time_adj() is still usable and will no longer have any date issues.
661 *) Delta CRL support. New use deltas option which will attempt to locate
662 and search any appropriate delta CRLs available.
664 This work was sponsored by Google.
667 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
668 code and add additional score elements. Validate alternate CRL paths
669 as part of the CRL checking and indicate a new error "CRL path validation
670 error" in this case. Applications wanting additional details can use
671 the verify callback and check the new "parent" field. If this is not
672 NULL CRL path validation is taking place. Existing applications wont
673 see this because it requires extended CRL support which is off by
676 This work was sponsored by Google.
679 *) Support for freshest CRL extension.
681 This work was sponsored by Google.
684 *) Initial indirect CRL support. Currently only supported in the CRLs
685 passed directly and not via lookup. Process certificate issuer
686 CRL entry extension and lookup CRL entries by bother issuer name
687 and serial number. Check and process CRL issuer entry in IDP extension.
689 This work was sponsored by Google.
692 *) Add support for distinct certificate and CRL paths. The CRL issuer
693 certificate is validated separately in this case. Only enabled if
694 an extended CRL support flag is set: this flag will enable additional
695 CRL functionality in future.
697 This work was sponsored by Google.
700 *) Add support for policy mappings extension.
702 This work was sponsored by Google.
705 *) Fixes to pathlength constraint, self issued certificate handling,
706 policy processing to align with RFC3280 and PKITS tests.
708 This work was sponsored by Google.
711 *) Support for name constraints certificate extension. DN, email, DNS
712 and URI types are currently supported.
714 This work was sponsored by Google.
717 *) To cater for systems that provide a pointer-based thread ID rather
718 than numeric, deprecate the current numeric thread ID mechanism and
719 replace it with a structure and associated callback type. This
720 mechanism allows a numeric "hash" to be extracted from a thread ID in
721 either case, and on platforms where pointers are larger than 'long',
722 mixing is done to help ensure the numeric 'hash' is usable even if it
723 can't be guaranteed unique. The default mechanism is to use "&errno"
724 as a pointer-based thread ID to distinguish between threads.
726 Applications that want to provide their own thread IDs should now use
727 CRYPTO_THREADID_set_callback() to register a callback that will call
728 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
730 Note that ERR_remove_state() is now deprecated, because it is tied
731 to the assumption that thread IDs are numeric. ERR_remove_state(0)
732 to free the current thread's error state should be replaced by
733 ERR_remove_thread_state(NULL).
735 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
736 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
737 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
738 application was previously providing a numeric thread callback that
739 was inappropriate for distinguishing threads, then uniqueness might
740 have been obtained with &errno that happened immediately in the
741 intermediate development versions of OpenSSL; this is no longer the
742 case, the numeric thread callback will now override the automatic use
744 [Geoff Thorpe, with help from Bodo Moeller]
746 *) Initial support for different CRL issuing certificates. This covers a
747 simple case where the self issued certificates in the chain exist and
748 the real CRL issuer is higher in the existing chain.
750 This work was sponsored by Google.
753 *) Removed effectively defunct crypto/store from the build.
756 *) Revamp of STACK to provide stronger type-checking. Still to come:
757 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
758 ASN1_STRING, CONF_VALUE.
761 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
762 RAM on SSL connections. This option can save about 34k per idle SSL.
765 *) Revamp of LHASH to provide stronger type-checking. Still to come:
766 STACK, TXT_DB, bsearch, qsort.
769 *) Initial support for Cryptographic Message Syntax (aka CMS) based
770 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
771 support for data, signedData, compressedData, digestedData and
772 encryptedData, envelopedData types included. Scripts to check against
773 RFC4134 examples draft and interop and consistency checks of many
774 content types and variants.
777 *) Add options to enc utility to support use of zlib compression BIO.
780 *) Extend mk1mf to support importing of options and assembly language
781 files from Configure script, currently only included in VC-WIN32.
782 The assembly language rules can now optionally generate the source
783 files from the associated perl scripts.
786 *) Implement remaining functionality needed to support GOST ciphersuites.
787 Interop testing has been performed using CryptoPro implementations.
788 [Victor B. Wagner <vitus@cryptocom.ru>]
790 *) s390x assembler pack.
793 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
797 *) Implement Opaque PRF Input TLS extension as specified in
798 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
799 official specification yet and no extension type assignment by
800 IANA exists, this extension (for now) will have to be explicitly
801 enabled when building OpenSSL by providing the extension number
802 to use. For example, specify an option
804 -DTLSEXT_TYPE_opaque_prf_input=0x9527
806 to the "config" or "Configure" script to enable the extension,
807 assuming extension number 0x9527 (which is a completely arbitrary
808 and unofficial assignment based on the MD5 hash of the Internet
809 Draft). Note that by doing so, you potentially lose
810 interoperability with other TLS implementations since these might
811 be using the same extension number for other purposes.
813 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
814 opaque PRF input value to use in the handshake. This will create
815 an interal copy of the length-'len' string at 'src', and will
816 return non-zero for success.
818 To get more control and flexibility, provide a callback function
821 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
822 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
826 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
829 Callback function 'cb' will be called in handshakes, and is
830 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
831 Argument 'arg' is for application purposes (the value as given to
832 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
833 be provided to the callback function). The callback function
834 has to return non-zero to report success: usually 1 to use opaque
835 PRF input just if possible, or 2 to enforce use of the opaque PRF
836 input. In the latter case, the library will abort the handshake
837 if opaque PRF input is not successfully negotiated.
839 Arguments 'peerinput' and 'len' given to the callback function
840 will always be NULL and 0 in the case of a client. A server will
841 see the client's opaque PRF input through these variables if
842 available (NULL and 0 otherwise). Note that if the server
843 provides an opaque PRF input, the length must be the same as the
844 length of the client's opaque PRF input.
846 Note that the callback function will only be called when creating
847 a new session (session resumption can resume whatever was
848 previously negotiated), and will not be called in SSL 2.0
849 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
850 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
851 for applications that need to enforce opaque PRF input.
855 *) Update ssl code to support digests other than SHA1+MD5 for handshake
858 [Victor B. Wagner <vitus@cryptocom.ru>]
860 *) Add RFC4507 support to OpenSSL. This includes the corrections in
861 RFC4507bis. The encrypted ticket format is an encrypted encoded
862 SSL_SESSION structure, that way new session features are automatically
865 If a client application caches session in an SSL_SESSION structure
866 support is transparent because tickets are now stored in the encoded
869 The SSL_CTX structure automatically generates keys for ticket
870 protection in servers so again support should be possible
871 with no application modification.
873 If a client or server wishes to disable RFC4507 support then the option
874 SSL_OP_NO_TICKET can be set.
876 Add a TLS extension debugging callback to allow the contents of any client
877 or server extensions to be examined.
879 This work was sponsored by Google.
882 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
883 OpenSSL should now compile cleanly on gcc 4.2
884 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
886 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
887 support including streaming MAC support: this is required for GOST
889 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
891 *) Add option -stream to use PKCS#7 streaming in smime utility. New
892 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
893 to output in BER and PEM format.
896 *) Experimental support for use of HMAC via EVP_PKEY interface. This
897 allows HMAC to be handled via the EVP_DigestSign*() interface. The
898 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
899 ENGINE support for HMAC keys which are unextractable. New -mac and
900 -macopt options to dgst utility.
903 *) New option -sigopt to dgst utility. Update dgst to use
904 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
905 alternative signing paramaters such as X9.31 or PSS in the dgst
909 *) Change ssl_cipher_apply_rule(), the internal function that does
910 the work each time a ciphersuite string requests enabling
911 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
912 removing ("!foo+bar") a class of ciphersuites: Now it maintains
913 the order of disabled ciphersuites such that those ciphersuites
914 that most recently went from enabled to disabled not only stay
915 in order with respect to each other, but also have higher priority
916 than other disabled ciphersuites the next time ciphersuites are
919 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
920 the same ciphersuites as with "HIGH" alone, but in a specific
921 order where the PSK ciphersuites come first (since they are the
922 most recently disabled ciphersuites when "HIGH" is parsed).
924 Also, change ssl_create_cipher_list() (using this new
925 funcionality) such that between otherwise identical
926 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
930 *) Change ssl_create_cipher_list() so that it automatically
931 arranges the ciphersuites in reasonable order before starting
932 to process the rule string. Thus, the definition for "DEFAULT"
933 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
934 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
935 This makes it much easier to arrive at a reasonable default order
936 in applications for which anonymous ciphers are OK (meaning
937 that you can't actually use DEFAULT).
938 [Bodo Moeller; suggested by Victor Duchovni]
940 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
941 processing) into multiple integers instead of setting
942 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
943 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
944 (These masks as well as the individual bit definitions are hidden
945 away into the non-exported interface ssl/ssl_locl.h, so this
946 change to the definition of the SSL_CIPHER structure shouldn't
947 affect applications.) This give us more bits for each of these
948 categories, so there is no longer a need to coagulate AES128 and
949 AES256 into a single algorithm bit, and to coagulate Camellia128
950 and Camellia256 into a single algorithm bit, which has led to all
953 Thus, among other things, the kludge introduced in 0.9.7m and
954 0.9.8e for masking out AES256 independently of AES128 or masking
955 out Camellia256 independently of AES256 is not needed here in 0.9.9.
957 With the change, we also introduce new ciphersuite aliases that
958 so far were missing: "AES128", "AES256", "CAMELLIA128", and
962 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
963 Use the leftmost N bytes of the signature input if the input is
964 larger than the prime q (with N being the size in bytes of q).
967 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
968 it yet and it is largely untested.
971 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
974 *) Initial incomplete changes to avoid need for function casts in OpenSSL
975 some compilers (gcc 4.2 and later) reject their use. Safestack is
976 reimplemented. Update ASN1 to avoid use of legacy functions.
979 *) Win32/64 targets are linked with Winsock2.
982 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
983 to external functions. This can be used to increase CRL handling
984 efficiency especially when CRLs are very large by (for example) storing
985 the CRL revoked certificates in a database.
988 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
989 new CRLs added to a directory can be used. New command line option
990 -verify_return_error to s_client and s_server. This causes real errors
991 to be returned by the verify callback instead of carrying on no matter
992 what. This reflects the way a "real world" verify callback would behave.
995 *) GOST engine, supporting several GOST algorithms and public key formats.
996 Kindly donated by Cryptocom.
999 *) Partial support for Issuing Distribution Point CRL extension. CRLs
1000 partitioned by DP are handled but no indirect CRL or reason partitioning
1001 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
1002 selected via a scoring technique which handles IDP and AKID in CRLs.
1005 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
1006 will ultimately be used for all verify operations: this will remove the
1007 X509_STORE dependency on certificate verification and allow alternative
1008 lookup methods. X509_STORE based implementations of these two callbacks.
1011 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
1012 Modify get_crl() to find a valid (unexpired) CRL if possible.
1015 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
1016 this would be called X509_CRL_cmp() but that name is already used by
1017 a function that just compares CRL issuer names. Cache several CRL
1018 extensions in X509_CRL structure and cache CRLDP in X509.
1021 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
1022 this maps equivalent X509_NAME structures into a consistent structure.
1023 Name comparison can then be performed rapidly using memcmp().
1026 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
1030 *) Allow digests to supply their own micalg string for S/MIME type using
1031 the ctrl EVP_MD_CTRL_MICALG.
1034 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
1035 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
1036 ctrl. It can then customise the structure before and/or after signing
1040 *) New function OBJ_add_sigid() to allow application defined signature OIDs
1041 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
1042 to free up any added signature OIDs.
1045 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
1046 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
1047 digest and cipher tables. New options added to openssl utility:
1048 list-message-digest-algorithms and list-cipher-algorithms.
1051 *) Change the array representation of binary polynomials: the list
1052 of degrees of non-zero coefficients is now terminated with -1.
1053 Previously it was terminated with 0, which was also part of the
1054 value; thus, the array representation was not applicable to
1055 polynomials where t^0 has coefficient zero. This change makes
1056 the array representation useful in a more general context.
1059 *) Various modifications and fixes to SSL/TLS cipher string
1060 handling. For ECC, the code now distinguishes between fixed ECDH
1061 with RSA certificates on the one hand and with ECDSA certificates
1062 on the other hand, since these are separate ciphersuites. The
1063 unused code for Fortezza ciphersuites has been removed.
1065 For consistency with EDH, ephemeral ECDH is now called "EECDH"
1066 (not "ECDHE"). For consistency with the code for DH
1067 certificates, use of ECDH certificates is now considered ECDH
1068 authentication, not RSA or ECDSA authentication (the latter is
1069 merely the CA's signing algorithm and not actively used in the
1072 The temporary ciphersuite alias "ECCdraft" is no longer
1073 available, and ECC ciphersuites are no longer excluded from "ALL"
1074 and "DEFAULT". The following aliases now exist for RFC 4492
1075 ciphersuites, most of these by analogy with the DH case:
1077 kECDHr - ECDH cert, signed with RSA
1078 kECDHe - ECDH cert, signed with ECDSA
1079 kECDH - ECDH cert (signed with either RSA or ECDSA)
1080 kEECDH - ephemeral ECDH
1081 ECDH - ECDH cert or ephemeral ECDH
1087 AECDH - anonymous ECDH
1088 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
1092 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
1093 Use correct micalg parameters depending on digest(s) in signed message.
1096 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
1097 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
1100 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
1101 an engine to register a method. Add ENGINE lookups for methods and
1102 functional reference processing.
1105 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
1106 EVP_{Sign,Verify}* which allow an application to customise the signature
1110 *) New -resign option to smime utility. This adds one or more signers
1111 to an existing PKCS#7 signedData structure. Also -md option to use an
1112 alternative message digest algorithm for signing.
1115 *) Tidy up PKCS#7 routines and add new functions to make it easier to
1116 create PKCS7 structures containing multiple signers. Update smime
1117 application to support multiple signers.
1120 *) New -macalg option to pkcs12 utility to allow setting of an alternative
1124 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
1125 Reorganize PBE internals to lookup from a static table using NIDs,
1126 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
1127 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
1128 PRF which will be automatically used with PBES2.
1131 *) Replace the algorithm specific calls to generate keys in "req" with the
1135 *) Update PKCS#7 enveloped data routines to use new API. This is now
1136 supported by any public key method supporting the encrypt operation. A
1137 ctrl is added to allow the public key algorithm to examine or modify
1138 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
1142 *) Add a ctrl to asn1 method to allow a public key algorithm to express
1143 a default digest type to use. In most cases this will be SHA1 but some
1144 algorithms (such as GOST) need to specify an alternative digest. The
1145 return value indicates how strong the prefernce is 1 means optional and
1146 2 is mandatory (that is it is the only supported type). Modify
1147 ASN1_item_sign() to accept a NULL digest argument to indicate it should
1148 use the default md. Update openssl utilities to use the default digest
1149 type for signing if it is not explicitly indicated.
1152 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
1153 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
1154 signing method from the key type. This effectively removes the link
1155 between digests and public key types.
1158 *) Add an OID cross reference table and utility functions. Its purpose is to
1159 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
1160 rsaEncryption. This will allow some of the algorithm specific hackery
1161 needed to use the correct OID to be removed.
1164 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
1165 structures for PKCS7_sign(). They are now set up by the relevant public
1169 *) Add provisional EC pkey method with support for ECDSA and ECDH.
1172 *) Add support for key derivation (agreement) in the API, DH method and
1176 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
1177 public and private key formats. As a side effect these add additional
1178 command line functionality not previously available: DSA signatures can be
1179 generated and verified using pkeyutl and DH key support and generation in
1184 [Oliver Tappe <zooey@hirschkaefer.de>]
1186 *) New make target "install_html_docs" installs HTML renditions of the
1188 [Oliver Tappe <zooey@hirschkaefer.de>]
1190 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
1191 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
1192 support key and parameter generation and add initial key generation
1193 functionality for RSA.
1196 *) Add functions for main EVP_PKEY_method operations. The undocumented
1197 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
1198 EVP_PKEY_{encrypt,decrypt}_old.
1201 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
1202 key API, doesn't do much yet.
1205 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
1206 public key algorithms. New option to openssl utility:
1207 "list-public-key-algorithms" to print out info.
1210 *) Implement the Supported Elliptic Curves Extension for
1211 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1214 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
1215 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
1218 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
1219 utilities such as rsa, dsa, dsaparam etc except they process any key
1223 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
1224 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
1225 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
1229 *) Initial support for pluggable public key ASN1.
1230 De-spaghettify the public key ASN1 handling. Move public and private
1231 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
1232 algorithm specific handling to a single module within the relevant
1233 algorithm directory. Add functions to allow (near) opaque processing
1234 of public and private key structures.
1237 *) Implement the Supported Point Formats Extension for
1238 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1241 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
1242 for the psk identity [hint] and the psk callback functions to the
1243 SSL_SESSION, SSL and SSL_CTX structure.
1246 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
1250 SSL_CTX_use_psk_identity_hint
1251 SSL_get_psk_identity_hint
1252 SSL_get_psk_identity
1253 SSL_use_psk_identity_hint
1255 [Mika Kousa and Pasi Eronen of Nokia Corporation]
1257 *) Add RFC 3161 compliant time stamp request creation, response generation
1258 and response verification functionality.
1259 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
1261 *) Add initial support for TLS extensions, specifically for the server_name
1262 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1263 have new members for a host name. The SSL data structure has an
1264 additional member SSL_CTX *initial_ctx so that new sessions can be
1265 stored in that context to allow for session resumption, even after the
1266 SSL has been switched to a new SSL_CTX in reaction to a client's
1267 server_name extension.
1269 New functions (subject to change):
1271 SSL_get_servername()
1272 SSL_get_servername_type()
1275 New CTRL codes and macros (subject to change):
1277 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1278 - SSL_CTX_set_tlsext_servername_callback()
1279 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1280 - SSL_CTX_set_tlsext_servername_arg()
1281 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1283 openssl s_client has a new '-servername ...' option.
1285 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1286 '-key2 ...', '-servername_fatal' (subject to change). This allows
1287 testing the HostName extension for a specific single host name ('-cert'
1288 and '-key' remain fallbacks for handshakes without HostName
1289 negotiation). If the unrecogninzed_name alert has to be sent, this by
1290 default is a warning; it becomes fatal with the '-servername_fatal'
1293 [Peter Sylvester, Remy Allais, Christophe Renou]
1295 *) Whirlpool hash implementation is added.
1298 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
1299 bn(64,32). Because of instruction set limitations it doesn't have
1300 any negative impact on performance. This was done mostly in order
1301 to make it possible to share assembler modules, such as bn_mul_mont
1302 implementations, between 32- and 64-bit builds without hassle.
1305 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
1306 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
1310 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
1311 dedicated Montgomery multiplication procedure, is introduced.
1312 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
1313 "64-bit" performance on certain 32-bit targets.
1316 *) New option SSL_OP_NO_COMP to disable use of compression selectively
1317 in SSL structures. New SSL ctrl to set maximum send fragment size.
1318 Save memory by seeting the I/O buffer sizes dynamically instead of
1319 using the maximum available value.
1322 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
1323 in addition to the text details.
1326 *) Very, very preliminary EXPERIMENTAL support for printing of general
1327 ASN1 structures. This currently produces rather ugly output and doesn't
1328 handle several customised structures at all.
1331 *) Integrated support for PVK file format and some related formats such
1332 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
1333 these in the 'rsa' and 'dsa' utilities.
1336 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
1339 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
1340 place for the (very old) "NETSCAPE" format certificates which are now
1341 handled using new ASN1 code equivalents.
1344 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
1345 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
1346 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
1349 *) Modify CRL distribution points extension code to print out previously
1350 unsupported fields. Enhance extension setting code to allow setting of
1354 *) Add print and set support for Issuing Distribution Point CRL extension.
1357 *) Change 'Configure' script to enable Camellia by default.
1360 Changes between 0.9.8r and 0.9.8s [xx XXX xxxx]
1362 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
1363 for multi-threaded use of ECDH.
1364 [Adam Langley (Google)]
1366 *) Fix x509_name_ex_d2i memory leak on bad inputs.
1369 *) Add protection against ECDSA timing attacks as mentioned in the paper
1370 by Billy Bob Brumley and Nicola Tuveri, see:
1372 http://eprint.iacr.org/2011/232.pdf
1374 [Billy Bob Brumley and Nicola Tuveri]
1376 Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
1378 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
1379 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
1381 *) Fix bug in string printing code: if *any* escaping is enabled we must
1382 escape the escape character (backslash) or the resulting string is
1386 Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
1388 *) Disable code workaround for ancient and obsolete Netscape browsers
1389 and servers: an attacker can use it in a ciphersuite downgrade attack.
1390 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
1393 *) Fixed J-PAKE implementation error, originally discovered by
1394 Sebastien Martini, further info and confirmation from Stefan
1395 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
1398 Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
1400 *) Fix extension code to avoid race conditions which can result in a buffer
1401 overrun vulnerability: resumed sessions must not be modified as they can
1402 be shared by multiple threads. CVE-2010-3864
1405 *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
1408 *) Don't reencode certificate when calculating signature: cache and use
1409 the original encoding instead. This makes signature verification of
1410 some broken encodings work correctly.
1413 *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
1414 is also one of the inputs.
1415 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1417 *) Don't repeatedly append PBE algorithms to table if they already exist.
1418 Sort table on each new add. This effectively makes the table read only
1419 after all algorithms are added and subsequent calls to PKCS12_pbe_add
1423 Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
1425 [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
1428 *) Correct a typo in the CMS ASN1 module which can result in invalid memory
1429 access or freeing data twice (CVE-2010-0742)
1430 [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
1432 *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
1433 common in certificates and some applications which only call
1434 SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
1438 Reduce copying into .apps and .test in makevms.com
1439 Don't try to use blank CA certificate in CA.com
1440 Allow use of C files from original directories in maketests.com
1441 [Steven M. Schweda" <sms@antinode.info>]
1443 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
1445 *) When rejecting SSL/TLS records due to an incorrect version number, never
1446 update s->server with a new major version number. As of
1447 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
1448 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
1449 the previous behavior could result in a read attempt at NULL when
1450 receiving specific incorrect SSL/TLS records once record payload
1451 protection is active. (CVE-2010-0740)
1452 [Bodo Moeller, Adam Langley <agl@chromium.org>]
1454 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
1455 could be crashed if the relevant tables were not present (e.g. chrooted).
1456 [Tomas Hoger <thoger@redhat.com>]
1458 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
1460 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
1461 [Martin Olsson, Neel Mehta]
1463 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
1464 accommodate for stack sorting, always a write lock!).
1467 *) On some versions of WIN32 Heap32Next is very slow. This can cause
1468 excessive delays in the RAND_poll(): over a minute. As a workaround
1469 include a time check in the inner Heap32Next loop too.
1472 *) The code that handled flushing of data in SSL/TLS originally used the
1473 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
1474 the problem outlined in PR#1949. The fix suggested there however can
1475 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
1476 of Apache). So instead simplify the code to flush unconditionally.
1477 This should be fine since flushing with no data to flush is a no op.
1480 *) Handle TLS versions 2.0 and later properly and correctly use the
1481 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
1482 off ancient servers have a habit of sticking around for a while...
1485 *) Modify compression code so it frees up structures without using the
1486 ex_data callbacks. This works around a problem where some applications
1487 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
1488 restarting) then use compression (e.g. SSL with compression) later.
1489 This results in significant per-connection memory leaks and
1490 has caused some security issues including CVE-2008-1678 and
1494 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
1495 change when encrypting or decrypting.
1498 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
1499 connect and renegotiate with servers which do not support RI.
1500 Until RI is more widely deployed this option is enabled by default.
1503 *) Add "missing" ssl ctrls to clear options and mode.
1506 *) If client attempts to renegotiate and doesn't support RI respond with
1507 a no_renegotiation alert as required by RFC5746. Some renegotiating
1508 TLS clients will continue a connection gracefully when they receive
1509 the alert. Unfortunately OpenSSL mishandled this alert and would hang
1510 waiting for a server hello which it will never receive. Now we treat a
1511 received no_renegotiation alert as a fatal error. This is because
1512 applications requesting a renegotiation might well expect it to succeed
1513 and would have no code in place to handle the server denying it so the
1514 only safe thing to do is to terminate the connection.
1517 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
1518 peer supports secure renegotiation and 0 otherwise. Print out peer
1519 renegotiation support in s_client/s_server.
1522 *) Replace the highly broken and deprecated SPKAC certification method with
1523 the updated NID creation version. This should correctly handle UTF8.
1526 *) Implement RFC5746. Re-enable renegotiation but require the extension
1527 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
1528 turns out to be a bad idea. It has been replaced by
1529 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
1530 SSL_CTX_set_options(). This is really not recommended unless you
1531 know what you are doing.
1532 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
1534 *) Fixes to stateless session resumption handling. Use initial_ctx when
1535 issuing and attempting to decrypt tickets in case it has changed during
1536 servername handling. Use a non-zero length session ID when attempting
1537 stateless session resumption: this makes it possible to determine if
1538 a resumption has occurred immediately after receiving server hello
1539 (several places in OpenSSL subtly assume this) instead of later in
1543 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
1544 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
1545 fixes for a few places where the return code is not checked
1547 [Julia Lawall <julia@diku.dk>]
1549 *) Add --strict-warnings option to Configure script to include devteam
1550 warnings in other configurations.
1553 *) Add support for --libdir option and LIBDIR variable in makefiles. This
1554 makes it possible to install openssl libraries in locations which
1555 have names other than "lib", for example "/usr/lib64" which some
1557 [Steve Henson, based on patch from Jeremy Utley]
1559 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
1560 X690 8.9.12 and can produce some misleading textual output of OIDs.
1561 [Steve Henson, reported by Dan Kaminsky]
1563 *) Delete MD2 from algorithm tables. This follows the recommendation in
1564 several standards that it is not used in new applications due to
1565 several cryptographic weaknesses. For binary compatibility reasons
1566 the MD2 API is still compiled in by default.
1569 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
1573 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
1574 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
1576 [Guenter <lists@gknw.net>]
1578 *) Fix the server certificate chain building code to use X509_verify_cert(),
1579 it used to have an ad-hoc builder which was unable to cope with anything
1580 other than a simple chain.
1581 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
1583 *) Don't check self signed certificate signatures in X509_verify_cert()
1584 by default (a flag can override this): it just wastes time without
1585 adding any security. As a useful side effect self signed root CAs
1586 with non-FIPS digests are now usable in FIPS mode.
1589 *) In dtls1_process_out_of_seq_message() the check if the current message
1590 is already buffered was missing. For every new message was memory
1591 allocated, allowing an attacker to perform an denial of service attack
1592 with sending out of seq handshake messages until there is no memory
1593 left. Additionally every future messege was buffered, even if the
1594 sequence number made no sense and would be part of another handshake.
1595 So only messages with sequence numbers less than 10 in advance will be
1596 buffered. (CVE-2009-1378)
1597 [Robin Seggelmann, discovered by Daniel Mentz]
1599 *) Records are buffered if they arrive with a future epoch to be
1600 processed after finishing the corresponding handshake. There is
1601 currently no limitation to this buffer allowing an attacker to perform
1602 a DOS attack with sending records with future epochs until there is no
1603 memory left. This patch adds the pqueue_size() function to detemine
1604 the size of a buffer and limits the record buffer to 100 entries.
1606 [Robin Seggelmann, discovered by Daniel Mentz]
1608 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
1609 parent structure is freed. (CVE-2009-1379)
1612 *) Handle non-blocking I/O properly in SSL_shutdown() call.
1613 [Darryl Miles <darryl-mailinglists@netbauds.net>]
1616 [Ilya O. <vrghost@gmail.com>]
1618 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
1620 *) Disable renegotiation completely - this fixes a severe security
1621 problem (CVE-2009-3555) at the cost of breaking all
1622 renegotiation. Renegotiation can be re-enabled by setting
1623 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
1624 run-time. This is really not recommended unless you know what
1628 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
1630 *) Don't set val to NULL when freeing up structures, it is freed up by
1631 underlying code. If sizeof(void *) > sizeof(long) this can result in
1632 zeroing past the valid field. (CVE-2009-0789)
1633 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
1635 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
1636 checked correctly. This would allow some invalid signed attributes to
1637 appear to verify correctly. (CVE-2009-0591)
1638 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1640 *) Reject UniversalString and BMPString types with invalid lengths. This
1641 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
1642 a legal length. (CVE-2009-0590)
1645 *) Set S/MIME signing as the default purpose rather than setting it
1646 unconditionally. This allows applications to override it at the store
1650 *) Permit restricted recursion of ASN1 strings. This is needed in practice
1651 to handle some structures.
1654 *) Improve efficiency of mem_gets: don't search whole buffer each time
1656 [Jeremy Shapiro <jnshapir@us.ibm.com>]
1658 *) New -hex option for openssl rand.
1661 *) Print out UTF8String and NumericString when parsing ASN1.
1664 *) Support NumericString type for name components.
1667 *) Allow CC in the environment to override the automatically chosen
1668 compiler. Note that nothing is done to ensure flags work with the
1672 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
1674 *) Properly check EVP_VerifyFinal() and similar return values
1676 [Ben Laurie, Bodo Moeller, Google Security Team]
1678 *) Enable TLS extensions by default.
1681 *) Allow the CHIL engine to be loaded, whether the application is
1682 multithreaded or not. (This does not release the developer from the
1683 obligation to set up the dynamic locking callbacks.)
1684 [Sander Temme <sander@temme.net>]
1686 *) Use correct exit code if there is an error in dgst command.
1687 [Steve Henson; problem pointed out by Roland Dirlewanger]
1689 *) Tweak Configure so that you need to say "experimental-jpake" to enable
1690 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
1693 *) Add experimental JPAKE support, including demo authentication in
1694 s_client and s_server.
1697 *) Set the comparison function in v3_addr_canonize().
1698 [Rob Austein <sra@hactrn.net>]
1700 *) Add support for XMPP STARTTLS in s_client.
1701 [Philip Paeps <philip@freebsd.org>]
1703 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
1704 to ensure that even with this option, only ciphersuites in the
1705 server's preference list will be accepted. (Note that the option
1706 applies only when resuming a session, so the earlier behavior was
1707 just about the algorithm choice for symmetric cryptography.)
1710 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
1712 *) Fix NULL pointer dereference if a DTLS server received
1713 ChangeCipherSpec as first record (CVE-2009-1386).
1716 *) Fix a state transitition in s3_srvr.c and d1_srvr.c
1717 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
1720 *) The fix in 0.9.8c that supposedly got rid of unsafe
1721 double-checked locking was incomplete for RSA blinding,
1722 addressing just one layer of what turns out to have been
1723 doubly unsafe triple-checked locking.
1725 So now fix this for real by retiring the MONT_HELPER macro
1726 in crypto/rsa/rsa_eay.c.
1728 [Bodo Moeller; problem pointed out by Marius Schilder]
1730 *) Various precautionary measures:
1732 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
1734 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
1735 (NB: This would require knowledge of the secret session ticket key
1736 to exploit, in which case you'd be SOL either way.)
1738 - Change bn_nist.c so that it will properly handle input BIGNUMs
1739 outside the expected range.
1741 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
1744 [Neel Mehta, Bodo Moeller]
1746 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
1747 the load fails. Useful for distros.
1748 [Ben Laurie and the FreeBSD team]
1750 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
1753 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
1756 *) Expand ENGINE to support engine supplied SSL client certificate functions.
1758 This work was sponsored by Logica.
1761 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
1762 keystores. Support for SSL/TLS client authentication too.
1763 Not compiled unless enable-capieng specified to Configure.
1765 This work was sponsored by Logica.
1768 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
1769 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
1770 attribute creation routines such as certifcate requests and PKCS#12
1774 Changes between 0.9.8g and 0.9.8h [28 May 2008]
1776 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
1777 handshake which could lead to a cilent crash as found using the
1778 Codenomicon TLS test suite (CVE-2008-1672)
1779 [Steve Henson, Mark Cox]
1781 *) Fix double free in TLS server name extensions which could lead to
1782 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
1785 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
1787 Clear the error queue to ensure that error entries left from
1788 older function calls do not interfere with the correct operation.
1789 [Lutz Jaenicke, Erik de Castro Lopo]
1791 *) Remove root CA certificates of commercial CAs:
1793 The OpenSSL project does not recommend any specific CA and does not
1794 have any policy with respect to including or excluding any CA.
1795 Therefore it does not make any sense to ship an arbitrary selection
1796 of root CA certificates with the OpenSSL software.
1799 *) RSA OAEP patches to fix two separate invalid memory reads.
1800 The first one involves inputs when 'lzero' is greater than
1801 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
1802 before the beginning of from). The second one involves inputs where
1803 the 'db' section contains nothing but zeroes (there is a one-byte
1804 invalid read after the end of 'db').
1805 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1807 *) Partial backport from 0.9.9-dev:
1809 Introduce bn_mul_mont (dedicated Montgomery multiplication
1810 procedure) as a candidate for BIGNUM assembler implementation.
1811 While 0.9.9-dev uses assembler for various architectures, only
1812 x86_64 is available by default here in the 0.9.8 branch, and
1813 32-bit x86 is available through a compile-time setting.
1815 To try the 32-bit x86 assembler implementation, use Configure
1816 option "enable-montasm" (which exists only for this backport).
1818 As "enable-montasm" for 32-bit x86 disclaims code stability
1819 anyway, in this constellation we activate additional code
1820 backported from 0.9.9-dev for further performance improvements,
1821 namely BN_from_montgomery_word. (To enable this otherwise,
1822 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
1824 [Andy Polyakov (backport partially by Bodo Moeller)]
1826 *) Add TLS session ticket callback. This allows an application to set
1827 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
1828 values. This is useful for key rollover for example where several key
1829 sets may exist with different names.
1832 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
1833 This was broken until now in 0.9.8 releases, such that the only way
1834 a registered ENGINE could be used (assuming it initialises
1835 successfully on the host) was to explicitly set it as the default
1836 for the relevant algorithms. This is in contradiction with 0.9.7
1837 behaviour and the documentation. With this fix, when an ENGINE is
1838 registered into a given algorithm's table of implementations, the
1839 'uptodate' flag is reset so that auto-discovery will be used next
1840 time a new context for that algorithm attempts to select an
1842 [Ian Lister (tweaked by Geoff Thorpe)]
1844 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
1845 implemention in the following ways:
1847 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
1850 Lack of BER streaming support means one pass streaming processing is
1851 only supported if data is detached: setting the streaming flag is
1852 ignored for embedded content.
1854 CMS support is disabled by default and must be explicitly enabled
1855 with the enable-cms configuration option.
1858 *) Update the GMP engine glue to do direct copies between BIGNUM and
1859 mpz_t when openssl and GMP use the same limb size. Otherwise the
1860 existing "conversion via a text string export" trick is still used.
1861 [Paul Sheer <paulsheer@gmail.com>]
1863 *) Zlib compression BIO. This is a filter BIO which compressed and
1864 uncompresses any data passed through it.
1867 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
1868 RFC3394 compatible AES key wrapping.
1871 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
1872 sets string data without copying. X509_ALGOR_set0() and
1873 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
1874 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
1875 from an X509_ATTRIBUTE structure optionally checking it occurs only
1876 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
1880 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
1881 to get the expected BN_FLG_CONSTTIME behavior.
1882 [Bodo Moeller (Google)]
1886 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
1887 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
1888 - added some more tests to do_tests.pl
1889 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
1890 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
1891 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
1892 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
1893 - various changes to netware.pl to enable gcc-cross builds on Win32
1895 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
1896 - various changes to fix missing prototype warnings
1897 - fixed x86nasm.pl to create correct asm files for NASM COFF output
1898 - added AES, WHIRLPOOL and CPUID assembler code to build files
1899 - added missing AES assembler make rules to mk1mf.pl
1900 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
1901 [Guenter Knauf <eflash@gmx.net>]
1903 *) Implement certificate status request TLS extension defined in RFC3546.
1904 A client can set the appropriate parameters and receive the encoded
1905 OCSP response via a callback. A server can query the supplied parameters
1906 and set the encoded OCSP response in the callback. Add simplified examples
1907 to s_client and s_server.
1910 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
1912 *) Fix various bugs:
1913 + Binary incompatibility of ssl_ctx_st structure
1914 + DTLS interoperation with non-compliant servers
1915 + Don't call get_session_cb() without proposed session
1916 + Fix ia64 assembler code
1917 [Andy Polyakov, Steve Henson]
1919 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
1921 *) DTLS Handshake overhaul. There were longstanding issues with
1922 OpenSSL DTLS implementation, which were making it impossible for
1923 RFC 4347 compliant client to communicate with OpenSSL server.
1924 Unfortunately just fixing these incompatibilities would "cut off"
1925 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
1926 server keeps tolerating non RFC compliant syntax. The opposite is
1927 not true, 0.9.8f client can not communicate with earlier server.
1928 This update even addresses CVE-2007-4995.
1931 *) Changes to avoid need for function casts in OpenSSL: some compilers
1932 (gcc 4.2 and later) reject their use.
1933 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
1936 *) Add RFC4507 support to OpenSSL. This includes the corrections in
1937 RFC4507bis. The encrypted ticket format is an encrypted encoded
1938 SSL_SESSION structure, that way new session features are automatically
1941 If a client application caches session in an SSL_SESSION structure
1942 support is transparent because tickets are now stored in the encoded
1945 The SSL_CTX structure automatically generates keys for ticket
1946 protection in servers so again support should be possible
1947 with no application modification.
1949 If a client or server wishes to disable RFC4507 support then the option
1950 SSL_OP_NO_TICKET can be set.
1952 Add a TLS extension debugging callback to allow the contents of any client
1953 or server extensions to be examined.
1955 This work was sponsored by Google.
1958 *) Add initial support for TLS extensions, specifically for the server_name
1959 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1960 have new members for a host name. The SSL data structure has an
1961 additional member SSL_CTX *initial_ctx so that new sessions can be
1962 stored in that context to allow for session resumption, even after the
1963 SSL has been switched to a new SSL_CTX in reaction to a client's
1964 server_name extension.
1966 New functions (subject to change):
1968 SSL_get_servername()
1969 SSL_get_servername_type()
1972 New CTRL codes and macros (subject to change):
1974 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1975 - SSL_CTX_set_tlsext_servername_callback()
1976 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1977 - SSL_CTX_set_tlsext_servername_arg()
1978 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1980 openssl s_client has a new '-servername ...' option.
1982 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1983 '-key2 ...', '-servername_fatal' (subject to change). This allows
1984 testing the HostName extension for a specific single host name ('-cert'
1985 and '-key' remain fallbacks for handshakes without HostName
1986 negotiation). If the unrecogninzed_name alert has to be sent, this by
1987 default is a warning; it becomes fatal with the '-servername_fatal'
1990 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
1992 *) Add AES and SSE2 assembly language support to VC++ build.
1995 *) Mitigate attack on final subtraction in Montgomery reduction.
1998 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
1999 (which previously caused an internal error).
2002 *) Squeeze another 10% out of IGE mode when in != out.
2005 *) AES IGE mode speedup.
2006 [Dean Gaudet (Google)]
2008 *) Add the Korean symmetric 128-bit cipher SEED (see
2009 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
2010 add SEED ciphersuites from RFC 4162:
2012 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
2013 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
2014 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
2015 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
2017 To minimize changes between patchlevels in the OpenSSL 0.9.8
2018 series, SEED remains excluded from compilation unless OpenSSL
2019 is configured with 'enable-seed'.
2020 [KISA, Bodo Moeller]
2022 *) Mitigate branch prediction attacks, which can be practical if a
2023 single processor is shared, allowing a spy process to extract
2024 information. For detailed background information, see
2025 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
2026 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
2027 and Necessary Software Countermeasures"). The core of the change
2028 are new versions BN_div_no_branch() and
2029 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
2030 respectively, which are slower, but avoid the security-relevant
2031 conditional branches. These are automatically called by BN_div()
2032 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
2033 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
2034 remove a conditional branch.
2036 BN_FLG_CONSTTIME is the new name for the previous
2037 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
2038 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
2039 in the exponent causes BN_mod_exp_mont() to use the alternative
2040 implementation in BN_mod_exp_mont_consttime().) The old name
2041 remains as a deprecated alias.
2043 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
2044 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
2045 constant-time implementations for more than just exponentiation.
2046 Here too the old name is kept as a deprecated alias.
2048 BN_BLINDING_new() will now use BN_dup() for the modulus so that
2049 the BN_BLINDING structure gets an independent copy of the
2050 modulus. This means that the previous "BIGNUM *m" argument to
2051 BN_BLINDING_new() and to BN_BLINDING_create_param() now
2052 essentially becomes "const BIGNUM *m", although we can't actually
2053 change this in the header file before 0.9.9. It allows
2054 RSA_setup_blinding() to use BN_with_flags() on the modulus to
2055 enable BN_FLG_CONSTTIME.
2057 [Matthew D Wood (Intel Corp)]
2059 *) In the SSL/TLS server implementation, be strict about session ID
2060 context matching (which matters if an application uses a single
2061 external cache for different purposes). Previously,
2062 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
2063 set. This did ensure strict client verification, but meant that,
2064 with applications using a single external cache for quite
2065 different requirements, clients could circumvent ciphersuite
2066 restrictions for a given session ID context by starting a session
2067 in a different context.
2070 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
2071 a ciphersuite string such as "DEFAULT:RSA" cannot enable
2072 authentication-only ciphersuites.
2075 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
2076 not complete and could lead to a possible single byte overflow
2077 (CVE-2007-5135) [Ben Laurie]
2079 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
2081 *) Since AES128 and AES256 (and similarly Camellia128 and
2082 Camellia256) share a single mask bit in the logic of
2083 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
2084 kludge to work properly if AES128 is available and AES256 isn't
2085 (or if Camellia128 is available and Camellia256 isn't).
2088 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
2089 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
2090 When a point or a seed is encoded in a BIT STRING, we need to
2091 prevent the removal of trailing zero bits to get the proper DER
2092 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
2093 of a NamedBitList, for which trailing 0 bits need to be removed.)
2096 *) Have SSL/TLS server implementation tolerate "mismatched" record
2097 protocol version while receiving ClientHello even if the
2098 ClientHello is fragmented. (The server can't insist on the
2099 particular protocol version it has chosen before the ServerHello
2100 message has informed the client about his choice.)
2103 *) Add RFC 3779 support.
2104 [Rob Austein for ARIN, Ben Laurie]
2106 *) Load error codes if they are not already present instead of using a
2107 static variable. This allows them to be cleanly unloaded and reloaded.
2108 Improve header file function name parsing.
2111 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
2112 or CAPABILITY handshake as required by RFCs.
2115 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
2117 *) Introduce limits to prevent malicious keys being able to
2118 cause a denial of service. (CVE-2006-2940)
2119 [Steve Henson, Bodo Moeller]
2121 *) Fix ASN.1 parsing of certain invalid structures that can result
2122 in a denial of service. (CVE-2006-2937) [Steve Henson]
2124 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
2125 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
2127 *) Fix SSL client code which could crash if connecting to a
2128 malicious SSLv2 server. (CVE-2006-4343)
2129 [Tavis Ormandy and Will Drewry, Google Security Team]
2131 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
2132 match only those. Before that, "AES256-SHA" would be interpreted
2133 as a pattern and match "AES128-SHA" too (since AES128-SHA got
2134 the same strength classification in 0.9.7h) as we currently only
2135 have a single AES bit in the ciphersuite description bitmap.
2136 That change, however, also applied to ciphersuite strings such as
2137 "RC4-MD5" that intentionally matched multiple ciphersuites --
2138 namely, SSL 2.0 ciphersuites in addition to the more common ones
2139 from SSL 3.0/TLS 1.0.
2141 So we change the selection algorithm again: Naming an explicit
2142 ciphersuite selects this one ciphersuite, and any other similar
2143 ciphersuite (same bitmap) from *other* protocol versions.
2144 Thus, "RC4-MD5" again will properly select both the SSL 2.0
2145 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
2147 Since SSL 2.0 does not have any ciphersuites for which the
2148 128/256 bit distinction would be relevant, this works for now.
2149 The proper fix will be to use different bits for AES128 and
2150 AES256, which would have avoided the problems from the beginning;
2151 however, bits are scarce, so we can only do this in a new release
2152 (not just a patchlevel) when we can change the SSL_CIPHER
2153 definition to split the single 'unsigned long mask' bitmap into
2154 multiple values to extend the available space.
2158 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
2160 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
2161 (CVE-2006-4339) [Ben Laurie and Google Security Team]
2163 *) Add AES IGE and biIGE modes.
2166 *) Change the Unix randomness entropy gathering to use poll() when
2167 possible instead of select(), since the latter has some
2168 undesirable limitations.
2169 [Darryl Miles via Richard Levitte and Bodo Moeller]
2171 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
2172 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
2173 cannot be implicitly activated as part of, e.g., the "AES" alias.
2174 However, please upgrade to OpenSSL 0.9.9[-dev] for
2175 non-experimental use of the ECC ciphersuites to get TLS extension
2176 support, which is required for curve and point format negotiation
2177 to avoid potential handshake problems.
2180 *) Disable rogue ciphersuites:
2182 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
2183 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
2184 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
2186 The latter two were purportedly from
2187 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
2190 Also deactivate the remaining ciphersuites from
2191 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
2192 unofficial, and the ID has long expired.
2195 *) Fix RSA blinding Heisenbug (problems sometimes occured on
2196 dual-core machines) and other potential thread-safety issues.
2199 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
2200 versions), which is now available for royalty-free use
2201 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
2202 Also, add Camellia TLS ciphersuites from RFC 4132.
2204 To minimize changes between patchlevels in the OpenSSL 0.9.8
2205 series, Camellia remains excluded from compilation unless OpenSSL
2206 is configured with 'enable-camellia'.
2209 *) Disable the padding bug check when compression is in use. The padding
2210 bug check assumes the first packet is of even length, this is not
2211 necessarily true if compresssion is enabled and can result in false
2212 positives causing handshake failure. The actual bug test is ancient
2213 code so it is hoped that implementations will either have fixed it by
2214 now or any which still have the bug do not support compression.
2217 Changes between 0.9.8a and 0.9.8b [04 May 2006]
2219 *) When applying a cipher rule check to see if string match is an explicit
2220 cipher suite and only match that one cipher suite if it is.
2223 *) Link in manifests for VC++ if needed.
2224 [Austin Ziegler <halostatue@gmail.com>]
2226 *) Update support for ECC-based TLS ciphersuites according to
2227 draft-ietf-tls-ecc-12.txt with proposed changes (but without
2228 TLS extensions, which are supported starting with the 0.9.9
2229 branch, not in the OpenSSL 0.9.8 branch).
2232 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
2233 opaque EVP_CIPHER_CTX handling.
2236 *) Fixes and enhancements to zlib compression code. We now only use
2237 "zlib1.dll" and use the default __cdecl calling convention on Win32
2238 to conform with the standards mentioned here:
2239 http://www.zlib.net/DLL_FAQ.txt
2240 Static zlib linking now works on Windows and the new --with-zlib-include
2241 --with-zlib-lib options to Configure can be used to supply the location
2242 of the headers and library. Gracefully handle case where zlib library
2246 *) Several fixes and enhancements to the OID generation code. The old code
2247 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
2248 handle numbers larger than ULONG_MAX, truncated printing and had a
2249 non standard OBJ_obj2txt() behaviour.
2252 *) Add support for building of engines under engine/ as shared libraries
2253 under VC++ build system.
2256 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
2257 Hopefully, we will not see any false combination of paths any more.
2260 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
2262 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
2263 (part of SSL_OP_ALL). This option used to disable the
2264 countermeasure against man-in-the-middle protocol-version
2265 rollback in the SSL 2.0 server implementation, which is a bad
2266 idea. (CVE-2005-2969)
2268 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
2269 for Information Security, National Institute of Advanced Industrial
2270 Science and Technology [AIST], Japan)]
2272 *) Add two function to clear and return the verify parameter flags.
2275 *) Keep cipherlists sorted in the source instead of sorting them at
2276 runtime, thus removing the need for a lock.
2279 *) Avoid some small subgroup attacks in Diffie-Hellman.
2280 [Nick Mathewson and Ben Laurie]
2282 *) Add functions for well-known primes.
2285 *) Extended Windows CE support.
2286 [Satoshi Nakamura and Andy Polyakov]
2288 *) Initialize SSL_METHOD structures at compile time instead of during
2289 runtime, thus removing the need for a lock.
2292 *) Make PKCS7_decrypt() work even if no certificate is supplied by
2293 attempting to decrypt each encrypted key in turn. Add support to
2297 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2299 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
2302 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
2305 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
2306 key into the same file any more.
2309 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
2312 *) Add -utf8 command line and config file option to 'ca'.
2313 [Stefan <stf@udoma.org]
2315 *) Removed the macro des_crypt(), as it seems to conflict with some
2316 libraries. Use DES_crypt().
2319 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
2320 involves renaming the source and generated shared-libs for
2321 both. The engines will accept the corrected or legacy ids
2322 ('ncipher' and '4758_cca' respectively) when binding. NB,
2323 this only applies when building 'shared'.
2324 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
2326 *) Add attribute functions to EVP_PKEY structure. Modify
2327 PKCS12_create() to recognize a CSP name attribute and
2328 use it. Make -CSP option work again in pkcs12 utility.
2331 *) Add new functionality to the bn blinding code:
2332 - automatic re-creation of the BN_BLINDING parameters after
2333 a fixed number of uses (currently 32)
2334 - add new function for parameter creation
2335 - introduce flags to control the update behaviour of the
2336 BN_BLINDING parameters
2337 - hide BN_BLINDING structure
2338 Add a second BN_BLINDING slot to the RSA structure to improve
2339 performance when a single RSA object is shared among several
2343 *) Add support for DTLS.
2344 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
2346 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
2347 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
2350 *) Remove buggy and incompletet DH cert support from
2351 ssl/ssl_rsa.c and ssl/s3_both.c
2354 *) Use SHA-1 instead of MD5 as the default digest algorithm for
2355 the apps/openssl applications.
2358 *) Compile clean with "-Wall -Wmissing-prototypes
2359 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
2360 DEBUG_SAFESTACK must also be set.
2363 *) Change ./Configure so that certain algorithms can be disabled by default.
2364 The new counterpiece to "no-xxx" is "enable-xxx".
2366 The patented RC5 and MDC2 algorithms will now be disabled unless
2367 "enable-rc5" and "enable-mdc2", respectively, are specified.
2369 (IDEA remains enabled despite being patented. This is because IDEA
2370 is frequently required for interoperability, and there is no license
2371 fee for non-commercial use. As before, "no-idea" can be used to
2372 avoid this algorithm.)
2376 *) Add processing of proxy certificates (see RFC 3820). This work was
2377 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
2378 EGEE (Enabling Grids for E-science in Europe).
2381 *) RC4 performance overhaul on modern architectures/implementations, such
2382 as Intel P4, IA-64 and AMD64.
2385 *) New utility extract-section.pl. This can be used specify an alternative
2386 section number in a pod file instead of having to treat each file as
2387 a separate case in Makefile. This can be done by adding two lines to the
2390 =for comment openssl_section:XXX
2392 The blank line is mandatory.
2396 *) New arguments -certform, -keyform and -pass for s_client and s_server
2397 to allow alternative format key and certificate files and passphrase
2401 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
2402 update associated structures and add various utility functions.
2404 Add new policy related verify parameters, include policy checking in
2405 standard verify code. Enhance 'smime' application with extra parameters
2406 to support policy checking and print out.
2409 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
2410 Nehemiah processors. These extensions support AES encryption in hardware
2411 as well as RNG (though RNG support is currently disabled).
2412 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
2414 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
2417 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
2418 [Andy Polyakov and a number of other people]
2420 *) Improved PowerPC platform support. Most notably BIGNUM assembler
2421 implementation contributed by IBM.
2422 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
2424 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
2425 exponent rather than 'unsigned long'. There is a corresponding change to
2426 the new 'rsa_keygen' element of the RSA_METHOD structure.
2427 [Jelte Jansen, Geoff Thorpe]
2429 *) Functionality for creating the initial serial number file is now
2430 moved from CA.pl to the 'ca' utility with a new option -create_serial.
2432 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
2433 number file to 1, which is bound to cause problems. To avoid
2434 the problems while respecting compatibility between different 0.9.7
2435 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
2436 CA.pl for serial number initialization. With the new release 0.9.8,
2437 we can fix the problem directly in the 'ca' utility.)
2440 *) Reduced header interdepencies by declaring more opaque objects in
2441 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
2442 give fewer recursive includes, which could break lazy source code - so
2443 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
2444 developers should define this symbol when building and using openssl to
2445 ensure they track the recommended behaviour, interfaces, [etc], but
2446 backwards-compatible behaviour prevails when this isn't defined.
2449 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
2452 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
2453 This will generate a random key of the appropriate length based on the
2454 cipher context. The EVP_CIPHER can provide its own random key generation
2455 routine to support keys of a specific form. This is used in the des and
2456 3des routines to generate a key of the correct parity. Update S/MIME
2457 code to use new functions and hence generate correct parity DES keys.
2458 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
2459 valid (weak or incorrect parity).
2462 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
2463 as looking them up. This is useful when the verified structure may contain
2464 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
2465 present unless the new PKCS7_NO_CRL flag is asserted.
2468 *) Extend ASN1 oid configuration module. It now additionally accepts the
2471 shortName = some long name, 1.2.3.4
2474 *) Reimplemented the BN_CTX implementation. There is now no more static
2475 limitation on the number of variables it can handle nor the depth of the
2476 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
2477 information can now expand as required, and rather than having a single
2478 static array of bignums, BN_CTX now uses a linked-list of such arrays
2479 allowing it to expand on demand whilst maintaining the usefulness of
2480 BN_CTX's "bundling".
2483 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
2484 to allow all RSA operations to function using a single BN_CTX.
2487 *) Preliminary support for certificate policy evaluation and checking. This
2488 is initially intended to pass the tests outlined in "Conformance Testing
2489 of Relying Party Client Certificate Path Processing Logic" v1.07.
2492 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
2493 remained unused and not that useful. A variety of other little bignum
2494 tweaks and fixes have also been made continuing on from the audit (see
2498 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
2499 associated ASN1, EVP and SSL functions and old ASN1 macros.
2502 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
2503 and this should never fail. So the return value from the use of
2504 BN_set_word() (which can fail due to needless expansion) is now deprecated;
2505 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
2508 *) BN_CTX_get() should return zero-valued bignums, providing the same
2509 initialised value as BN_new().
2510 [Geoff Thorpe, suggested by Ulf Möller]
2512 *) Support for inhibitAnyPolicy certificate extension.
2515 *) An audit of the BIGNUM code is underway, for which debugging code is
2516 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
2517 is considered valid when processing BIGNUMs, and causes execution to
2518 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
2519 further steps are taken to deliberately pollute unused data in BIGNUM
2520 structures to try and expose faulty code further on. For now, openssl will
2521 (in its default mode of operation) continue to tolerate the inconsistent
2522 forms that it has tolerated in the past, but authors and packagers should
2523 consider trying openssl and their own applications when compiled with
2524 these debugging symbols defined. It will help highlight potential bugs in
2525 their own code, and will improve the test coverage for OpenSSL itself. At
2526 some point, these tighter rules will become openssl's default to improve
2527 maintainability, though the assert()s and other overheads will remain only
2528 in debugging configurations. See bn.h for more details.
2529 [Geoff Thorpe, Nils Larsch, Ulf Möller]
2531 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
2532 that can only be obtained through BN_CTX_new() (which implicitly
2533 initialises it). The presence of this function only made it possible
2534 to overwrite an existing structure (and cause memory leaks).
2537 *) Because of the callback-based approach for implementing LHASH as a
2538 template type, lh_insert() adds opaque objects to hash-tables and
2539 lh_doall() or lh_doall_arg() are typically used with a destructor callback
2540 to clean up those corresponding objects before destroying the hash table
2541 (and losing the object pointers). So some over-zealous constifications in
2542 LHASH have been relaxed so that lh_insert() does not take (nor store) the
2543 objects as "const" and the lh_doall[_arg] callback wrappers are not
2544 prototyped to have "const" restrictions on the object pointers they are
2545 given (and so aren't required to cast them away any more).
2548 *) The tmdiff.h API was so ugly and minimal that our own timing utility
2549 (speed) prefers to use its own implementation. The two implementations
2550 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
2551 its object type properly exposed (MS_TM) instead of casting to/from "char
2552 *". This may still change yet if someone realises MS_TM and "ms_time_***"
2553 aren't necessarily the greatest nomenclatures - but this is what was used
2554 internally to the implementation so I've used that for now.
2557 *) Ensure that deprecated functions do not get compiled when
2558 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
2559 the self-tests were still using deprecated key-generation functions so
2560 these have been updated also.
2563 *) Reorganise PKCS#7 code to separate the digest location functionality
2564 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
2565 New function PKCS7_set_digest() to set the digest type for PKCS#7
2566 digestedData type. Add additional code to correctly generate the
2567 digestedData type and add support for this type in PKCS7 initialization
2571 *) New function PKCS7_set0_type_other() this initializes a PKCS7
2572 structure of type "other".
2575 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
2576 sure the loop does correctly stop and breaking ("division by zero")
2577 modulus operations are not performed. The (pre-generated) prime
2578 table crypto/bn/bn_prime.h was already correct, but it could not be
2579 re-generated on some platforms because of the "division by zero"
2580 situation in the script.
2581 [Ralf S. Engelschall]
2583 *) Update support for ECC-based TLS ciphersuites according to
2584 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
2585 SHA-1 now is only used for "small" curves (where the
2586 representation of a field element takes up to 24 bytes); for
2587 larger curves, the field element resulting from ECDH is directly
2588 used as premaster secret.
2589 [Douglas Stebila (Sun Microsystems Laboratories)]
2591 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
2592 curve secp160r1 to the tests.
2593 [Douglas Stebila (Sun Microsystems Laboratories)]
2595 *) Add the possibility to load symbols globally with DSO.
2596 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
2598 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
2599 control of the error stack.
2602 *) Add support for STORE in ENGINE.
2605 *) Add the STORE type. The intention is to provide a common interface
2606 to certificate and key stores, be they simple file-based stores, or
2607 HSM-type store, or LDAP stores, or...
2608 NOTE: The code is currently UNTESTED and isn't really used anywhere.
2611 *) Add a generic structure called OPENSSL_ITEM. This can be used to
2612 pass a list of arguments to any function as well as provide a way
2613 for a function to pass data back to the caller.
2616 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
2617 works like BUF_strdup() but can be used to duplicate a portion of
2618 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
2622 *) Add the function sk_find_ex() which works like sk_find(), but will
2623 return an index to an element even if an exact match couldn't be
2624 found. The index is guaranteed to point at the element where the
2625 searched-for key would be inserted to preserve sorting order.
2628 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
2629 takes an extra flags argument for optional functionality. Currently,
2630 the following flags are defined:
2632 OBJ_BSEARCH_VALUE_ON_NOMATCH
2633 This one gets OBJ_bsearch_ex() to return a pointer to the first
2634 element where the comparing function returns a negative or zero
2637 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
2638 This one gets OBJ_bsearch_ex() to return a pointer to the first
2639 element where the comparing function returns zero. This is useful
2640 if there are more than one element where the comparing function
2644 *) Make it possible to create self-signed certificates with 'openssl ca'
2645 in such a way that the self-signed certificate becomes part of the
2646 CA database and uses the same mechanisms for serial number generation
2647 as all other certificate signing. The new flag '-selfsign' enables
2648 this functionality. Adapt CA.sh and CA.pl.in.
2651 *) Add functionality to check the public key of a certificate request
2652 against a given private. This is useful to check that a certificate
2653 request can be signed by that key (self-signing).
2656 *) Make it possible to have multiple active certificates with the same
2657 subject in the CA index file. This is done only if the keyword
2658 'unique_subject' is set to 'no' in the main CA section (default
2659 if 'CA_default') of the configuration file. The value is saved
2660 with the database itself in a separate index attribute file,
2661 named like the index file with '.attr' appended to the name.
2664 *) Generate muti valued AVAs using '+' notation in config files for
2668 *) Support for nameConstraints certificate extension.
2671 *) Support for policyConstraints certificate extension.
2674 *) Support for policyMappings certificate extension.
2677 *) Make sure the default DSA_METHOD implementation only uses its
2678 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
2679 and change its own handlers to be NULL so as to remove unnecessary
2680 indirection. This lets alternative implementations fallback to the
2681 default implementation more easily.
2684 *) Support for directoryName in GeneralName related extensions
2688 *) Make it possible to link applications using Makefile.shared.
2689 Make that possible even when linking against static libraries!
2692 *) Support for single pass processing for S/MIME signing. This now
2693 means that S/MIME signing can be done from a pipe, in addition
2694 cleartext signing (multipart/signed type) is effectively streaming
2695 and the signed data does not need to be all held in memory.
2697 This is done with a new flag PKCS7_STREAM. When this flag is set
2698 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
2699 is done after the data is output (and digests calculated) in
2700 SMIME_write_PKCS7().
2703 *) Add full support for -rpath/-R, both in shared libraries and
2704 applications, at least on the platforms where it's known how
2708 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
2709 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
2710 will now compute a table of multiples of the generator that
2711 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
2712 faster (notably in the case of a single point multiplication,
2713 scalar * generator).
2714 [Nils Larsch, Bodo Moeller]
2716 *) IPv6 support for certificate extensions. The various extensions
2717 which use the IP:a.b.c.d can now take IPv6 addresses using the
2718 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
2722 *) Added an ENGINE that implements RSA by performing private key
2723 exponentiations with the GMP library. The conversions to and from
2724 GMP's mpz_t format aren't optimised nor are any montgomery forms
2725 cached, and on x86 it appears OpenSSL's own performance has caught up.
2726 However there are likely to be other architectures where GMP could
2727 provide a boost. This ENGINE is not built in by default, but it can be
2728 specified at Configure time and should be accompanied by the necessary
2729 linker additions, eg;
2730 ./config -DOPENSSL_USE_GMP -lgmp
2733 *) "openssl engine" will not display ENGINE/DSO load failure errors when
2734 testing availability of engines with "-t" - the old behaviour is
2735 produced by increasing the feature's verbosity with "-tt".
2738 *) ECDSA routines: under certain error conditions uninitialized BN objects
2739 could be freed. Solution: make sure initialization is performed early
2740 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
2744 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
2745 and DH_METHOD (eg. by ENGINE implementations) to override the normal
2746 software implementations. For DSA and DH, parameter generation can
2747 also be overriden by providing the appropriate method callbacks.
2750 *) Change the "progress" mechanism used in key-generation and
2751 primality testing to functions that take a new BN_GENCB pointer in
2752 place of callback/argument pairs. The new API functions have "_ex"
2753 postfixes and the older functions are reimplemented as wrappers for
2754 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
2755 declarations of the old functions to help (graceful) attempts to
2756 migrate to the new functions. Also, the new key-generation API
2757 functions operate on a caller-supplied key-structure and return
2758 success/failure rather than returning a key or NULL - this is to
2759 help make "keygen" another member function of RSA_METHOD etc.
2761 Example for using the new callback interface:
2763 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
2767 BN_GENCB_set(&my_cb, my_callback, my_arg);
2769 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
2770 /* For the meaning of a, b in calls to my_callback(), see the
2771 * documentation of the function that calls the callback.
2772 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
2773 * my_callback should return 1 if it wants BN_is_prime_ex()
2774 * to continue, or 0 to stop.
2779 *) Change the ZLIB compression method to be stateful, and make it
2780 available to TLS with the number defined in
2781 draft-ietf-tls-compression-04.txt.
2784 *) Add the ASN.1 structures and functions for CertificatePair, which
2785 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
2787 CertificatePair ::= SEQUENCE {
2788 forward [0] Certificate OPTIONAL,
2789 reverse [1] Certificate OPTIONAL,
2790 -- at least one of the pair shall be present -- }
2792 Also implement the PEM functions to read and write certificate
2793 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
2795 This needed to be defined, mostly for the sake of the LDAP
2796 attribute crossCertificatePair, but may prove useful elsewhere as
2800 *) Make it possible to inhibit symlinking of shared libraries in
2801 Makefile.shared, for Cygwin's sake.
2804 *) Extend the BIGNUM API by creating a function
2805 void BN_set_negative(BIGNUM *a, int neg);
2806 and a macro that behave like
2807 int BN_is_negative(const BIGNUM *a);
2809 to avoid the need to access 'a->neg' directly in applications.
2812 *) Implement fast modular reduction for pseudo-Mersenne primes
2813 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
2814 EC_GROUP_new_curve_GFp() will now automatically use this
2816 [Nils Larsch <nla@trustcenter.de>]
2818 *) Add new lock type (CRYPTO_LOCK_BN).
2821 *) Change the ENGINE framework to automatically load engines
2822 dynamically from specific directories unless they could be
2823 found to already be built in or loaded. Move all the
2824 current engines except for the cryptodev one to a new
2826 The engines in engines/ are built as shared libraries if
2827 the "shared" options was given to ./Configure or ./config.
2828 Otherwise, they are inserted in libcrypto.a.
2829 /usr/local/ssl/engines is the default directory for dynamic
2830 engines, but that can be overriden at configure time through
2831 the usual use of --prefix and/or --openssldir, and at run
2832 time with the environment variable OPENSSL_ENGINES.
2833 [Geoff Thorpe and Richard Levitte]
2835 *) Add Makefile.shared, a helper makefile to build shared
2836 libraries. Addapt Makefile.org.
2839 *) Add version info to Win32 DLLs.
2840 [Peter 'Luna' Runestig" <peter@runestig.com>]
2842 *) Add new 'medium level' PKCS#12 API. Certificates and keys
2843 can be added using this API to created arbitrary PKCS#12
2844 files while avoiding the low level API.
2846 New options to PKCS12_create(), key or cert can be NULL and
2847 will then be omitted from the output file. The encryption
2848 algorithm NIDs can be set to -1 for no encryption, the mac
2849 iteration count can be set to 0 to omit the mac.
2851 Enhance pkcs12 utility by making the -nokeys and -nocerts
2852 options work when creating a PKCS#12 file. New option -nomac
2853 to omit the mac, NONE can be set for an encryption algorithm.
2854 New code is modified to use the enhanced PKCS12_create()
2855 instead of the low level API.
2858 *) Extend ASN1 encoder to support indefinite length constructed
2859 encoding. This can output sequences tags and octet strings in
2860 this form. Modify pk7_asn1.c to support indefinite length
2861 encoding. This is experimental and needs additional code to
2862 be useful, such as an ASN1 bio and some enhanced streaming
2865 Extend template encode functionality so that tagging is passed
2866 down to the template encoder.
2869 *) Let 'openssl req' fail if an argument to '-newkey' is not
2870 recognized instead of using RSA as a default.
2873 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
2874 As these are not official, they are not included in "ALL";
2875 the "ECCdraft" ciphersuite group alias can be used to select them.
2876 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
2878 *) Add ECDH engine support.
2879 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
2881 *) Add ECDH in new directory crypto/ecdh/.
2882 [Douglas Stebila (Sun Microsystems Laboratories)]
2884 *) Let BN_rand_range() abort with an error after 100 iterations
2885 without success (which indicates a broken PRNG).
2888 *) Change BN_mod_sqrt() so that it verifies that the input value
2889 is really the square of the return value. (Previously,
2890 BN_mod_sqrt would show GIGO behaviour.)
2893 *) Add named elliptic curves over binary fields from X9.62, SECG,
2894 and WAP/WTLS; add OIDs that were still missing.
2896 [Sheueling Chang Shantz and Douglas Stebila
2897 (Sun Microsystems Laboratories)]
2899 *) Extend the EC library for elliptic curves over binary fields
2900 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
2903 EC_GF2m_simple_method
2907 EC_GROUP_new_curve_GF2m
2908 EC_GROUP_set_curve_GF2m
2909 EC_GROUP_get_curve_GF2m
2910 EC_POINT_set_affine_coordinates_GF2m
2911 EC_POINT_get_affine_coordinates_GF2m
2912 EC_POINT_set_compressed_coordinates_GF2m
2914 Point compression for binary fields is disabled by default for
2915 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
2918 As binary polynomials are represented as BIGNUMs, various members
2919 of the EC_GROUP and EC_POINT data structures can be shared
2920 between the implementations for prime fields and binary fields;
2921 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
2922 are essentially identical to their ..._GFp counterparts.
2923 (For simplicity, the '..._GFp' prefix has been dropped from
2924 various internal method names.)
2926 An internal 'field_div' method (similar to 'field_mul' and
2927 'field_sqr') has been added; this is used only for binary fields.
2929 [Sheueling Chang Shantz and Douglas Stebila
2930 (Sun Microsystems Laboratories)]
2932 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
2933 through methods ('mul', 'precompute_mult').
2935 The generic implementations (now internally called 'ec_wNAF_mul'
2936 and 'ec_wNAF_precomputed_mult') remain the default if these
2937 methods are undefined.
2939 [Sheueling Chang Shantz and Douglas Stebila
2940 (Sun Microsystems Laboratories)]
2942 *) New function EC_GROUP_get_degree, which is defined through
2943 EC_METHOD. For curves over prime fields, this returns the bit
2944 length of the modulus.
2946 [Sheueling Chang Shantz and Douglas Stebila
2947 (Sun Microsystems Laboratories)]
2949 *) New functions EC_GROUP_dup, EC_POINT_dup.
2950 (These simply call ..._new and ..._copy).
2952 [Sheueling Chang Shantz and Douglas Stebila
2953 (Sun Microsystems Laboratories)]
2955 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
2956 Polynomials are represented as BIGNUMs (where the sign bit is not
2957 used) in the following functions [macros]:
2960 BN_GF2m_sub [= BN_GF2m_add]
2961 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
2962 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
2963 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
2965 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
2966 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
2967 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
2968 BN_GF2m_cmp [= BN_ucmp]
2970 (Note that only the 'mod' functions are actually for fields GF(2^m).
2971 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
2973 For some functions, an the irreducible polynomial defining a
2974 field can be given as an 'unsigned int[]' with strictly
2975 decreasing elements giving the indices of those bits that are set;
2976 i.e., p[] represents the polynomial
2977 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
2979 p[0] > p[1] > ... > p[k] = 0.
2980 This applies to the following functions:
2985 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
2986 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
2988 BN_GF2m_mod_sqrt_arr
2989 BN_GF2m_mod_solve_quad_arr
2993 Conversion can be performed by the following functions:
2998 bntest.c has additional tests for binary polynomial arithmetic.
3000 Two implementations for BN_GF2m_mod_div() are available.
3001 The default algorithm simply uses BN_GF2m_mod_inv() and
3002 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
3003 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
3004 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
3006 [Sheueling Chang Shantz and Douglas Stebila
3007 (Sun Microsystems Laboratories)]
3009 *) Add new error code 'ERR_R_DISABLED' that can be used when some
3010 functionality is disabled at compile-time.
3011 [Douglas Stebila <douglas.stebila@sun.com>]
3013 *) Change default behaviour of 'openssl asn1parse' so that more
3014 information is visible when viewing, e.g., a certificate:
3016 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
3017 mode the content of non-printable OCTET STRINGs is output in a
3018 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
3019 avoid the appearance of a printable string.
3020 [Nils Larsch <nla@trustcenter.de>]
3022 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
3024 EC_GROUP_set_asn1_flag()
3025 EC_GROUP_get_asn1_flag()
3026 EC_GROUP_set_point_conversion_form()
3027 EC_GROUP_get_point_conversion_form()
3028 These control ASN1 encoding details:
3029 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
3030 has been set to OPENSSL_EC_NAMED_CURVE.
3031 - Points are encoded in uncompressed form by default; options for
3032 asn1_for are as for point2oct, namely
3033 POINT_CONVERSION_COMPRESSED
3034 POINT_CONVERSION_UNCOMPRESSED
3035 POINT_CONVERSION_HYBRID
3037 Also add 'seed' and 'seed_len' members to EC_GROUP with access
3040 EC_GROUP_get0_seed()
3041 EC_GROUP_get_seed_len()
3042 This is used only for ASN1 purposes (so far).
3043 [Nils Larsch <nla@trustcenter.de>]
3045 *) Add 'field_type' member to EC_METHOD, which holds the NID
3046 of the appropriate field type OID. The new function
3047 EC_METHOD_get_field_type() returns this value.
3048 [Nils Larsch <nla@trustcenter.de>]
3053 EC_POINT_point2hex()
3054 EC_POINT_hex2point()
3055 providing useful interfaces to EC_POINT_point2oct() and
3056 EC_POINT_oct2point().
3057 [Nils Larsch <nla@trustcenter.de>]
3059 *) Change internals of the EC library so that the functions
3060 EC_GROUP_set_generator()
3061 EC_GROUP_get_generator()
3062 EC_GROUP_get_order()
3063 EC_GROUP_get_cofactor()
3064 are implemented directly in crypto/ec/ec_lib.c and not dispatched
3065 to methods, which would lead to unnecessary code duplication when
3066 adding different types of curves.
3067 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
3069 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
3070 arithmetic, and such that modified wNAFs are generated
3071 (which avoid length expansion in many cases).
3074 *) Add a function EC_GROUP_check_discriminant() (defined via
3075 EC_METHOD) that verifies that the curve discriminant is non-zero.
3077 Add a function EC_GROUP_check() that makes some sanity tests
3078 on a EC_GROUP, its generator and order. This includes
3079 EC_GROUP_check_discriminant().
3080 [Nils Larsch <nla@trustcenter.de>]
3082 *) Add ECDSA in new directory crypto/ecdsa/.
3084 Add applications 'openssl ecparam' and 'openssl ecdsa'
3085 (these are based on 'openssl dsaparam' and 'openssl dsa').
3087 ECDSA support is also included in various other files across the
3088 library. Most notably,
3089 - 'openssl req' now has a '-newkey ecdsa:file' option;
3090 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
3091 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
3092 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
3093 them suitable for ECDSA where domain parameters must be
3094 extracted before the specific public key;
3095 - ECDSA engine support has been added.
3096 [Nils Larsch <nla@trustcenter.de>]
3098 *) Include some named elliptic curves, and add OIDs from X9.62,
3099 SECG, and WAP/WTLS. Each curve can be obtained from the new
3101 EC_GROUP_new_by_curve_name(),
3102 and the list of available named curves can be obtained with
3103 EC_get_builtin_curves().
3104 Also add a 'curve_name' member to EC_GROUP objects, which can be
3106 EC_GROUP_set_curve_name()
3107 EC_GROUP_get_curve_name()
3108 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
3110 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3111 was actually never needed) and in BN_mul(). The removal in BN_mul()
3112 required a small change in bn_mul_part_recursive() and the addition
3113 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3114 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3115 bn_sub_words() and bn_add_words() except they take arrays with
3119 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
3121 *) Cleanse PEM buffers before freeing them since they may contain
3123 [Benjamin Bennett <ben@psc.edu>]
3125 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
3126 a ciphersuite string such as "DEFAULT:RSA" cannot enable
3127 authentication-only ciphersuites.
3130 *) Since AES128 and AES256 share a single mask bit in the logic of
3131 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
3132 kludge to work properly if AES128 is available and AES256 isn't.
3135 *) Expand security boundary to match 1.1.1 module.
3138 *) Remove redundant features: hash file source, editing of test vectors
3139 modify fipsld to use external fips_premain.c signature.
3142 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
3143 run algorithm test programs.
3146 *) Make algorithm test programs more tolerant of whitespace.
3149 *) Have SSL/TLS server implementation tolerate "mismatched" record
3150 protocol version while receiving ClientHello even if the
3151 ClientHello is fragmented. (The server can't insist on the
3152 particular protocol version it has chosen before the ServerHello
3153 message has informed the client about his choice.)
3156 *) Load error codes if they are not already present instead of using a
3157 static variable. This allows them to be cleanly unloaded and reloaded.
3160 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
3162 *) Introduce limits to prevent malicious keys being able to
3163 cause a denial of service. (CVE-2006-2940)
3164 [Steve Henson, Bodo Moeller]
3166 *) Fix ASN.1 parsing of certain invalid structures that can result
3167 in a denial of service. (CVE-2006-2937) [Steve Henson]
3169 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
3170 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
3172 *) Fix SSL client code which could crash if connecting to a
3173 malicious SSLv2 server. (CVE-2006-4343)
3174 [Tavis Ormandy and Will Drewry, Google Security Team]
3176 *) Change ciphersuite string processing so that an explicit
3177 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
3178 will no longer include "AES128-SHA"), and any other similar
3179 ciphersuite (same bitmap) from *other* protocol versions (so that
3180 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
3181 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
3182 changes from 0.9.8b and 0.9.8d.
3185 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
3187 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
3188 (CVE-2006-4339) [Ben Laurie and Google Security Team]
3190 *) Change the Unix randomness entropy gathering to use poll() when
3191 possible instead of select(), since the latter has some
3192 undesirable limitations.
3193 [Darryl Miles via Richard Levitte and Bodo Moeller]
3195 *) Disable rogue ciphersuites:
3197 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
3198 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
3199 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
3201 The latter two were purportedly from
3202 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
3205 Also deactive the remaining ciphersuites from
3206 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
3207 unofficial, and the ID has long expired.
3210 *) Fix RSA blinding Heisenbug (problems sometimes occured on
3211 dual-core machines) and other potential thread-safety issues.
3214 Changes between 0.9.7i and 0.9.7j [04 May 2006]
3216 *) Adapt fipsld and the build system to link against the validated FIPS
3217 module in FIPS mode.
3220 *) Fixes for VC++ 2005 build under Windows.
3223 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
3224 from a Windows bash shell such as MSYS. It is autodetected from the
3225 "config" script when run from a VC++ environment. Modify standard VC++
3226 build to use fipscanister.o from the GNU make build.
3229 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
3231 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
3232 The value now differs depending on if you build for FIPS or not.
3233 BEWARE! A program linked with a shared FIPSed libcrypto can't be
3234 safely run with a non-FIPSed libcrypto, as it may crash because of
3235 the difference induced by this change.
3238 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
3240 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
3241 (part of SSL_OP_ALL). This option used to disable the
3242 countermeasure against man-in-the-middle protocol-version
3243 rollback in the SSL 2.0 server implementation, which is a bad
3244 idea. (CVE-2005-2969)
3246 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
3247 for Information Security, National Institute of Advanced Industrial
3248 Science and Technology [AIST], Japan)]
3250 *) Minimal support for X9.31 signatures and PSS padding modes. This is
3251 mainly for FIPS compliance and not fully integrated at this stage.
3254 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
3255 the exponentiation using a fixed-length exponent. (Otherwise,
3256 the information leaked through timing could expose the secret key
3257 after many signatures; cf. Bleichenbacher's attack on DSA with
3261 *) Make a new fixed-window mod_exp implementation the default for
3262 RSA, DSA, and DH private-key operations so that the sequence of
3263 squares and multiplies and the memory access pattern are
3264 independent of the particular secret key. This will mitigate
3265 cache-timing and potential related attacks.
3267 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
3268 and this is automatically used by BN_mod_exp_mont() if the new flag
3269 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
3270 will use this BN flag for private exponents unless the flag
3271 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
3272 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
3274 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
3276 *) Change the client implementation for SSLv23_method() and
3277 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
3278 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
3279 (Previously, the SSL 2.0 backwards compatible Client Hello
3280 message format would be used even with SSL_OP_NO_SSLv2.)
3283 *) Add support for smime-type MIME parameter in S/MIME messages which some
3287 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
3288 a threadsafe manner. Modify rsa code to use new function and add calls
3289 to dsa and dh code (which had race conditions before).
3292 *) Include the fixed error library code in the C error file definitions
3293 instead of fixing them up at runtime. This keeps the error code
3294 structures constant.
3297 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
3299 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
3302 *) Fixes for newer kerberos headers. NB: the casts are needed because
3303 the 'length' field is signed on one version and unsigned on another
3304 with no (?) obvious way to tell the difference, without these VC++
3305 complains. Also the "definition" of FAR (blank) is no longer included
3306 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
3307 some needed definitions.
3310 *) Undo Cygwin change.
3313 *) Added support for proxy certificates according to RFC 3820.
3314 Because they may be a security thread to unaware applications,
3315 they must be explicitely allowed in run-time. See
3316 docs/HOWTO/proxy_certificates.txt for further information.
3319 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
3321 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
3322 server and client random values. Previously
3323 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
3324 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
3326 This change has negligible security impact because:
3328 1. Server and client random values still have 24 bytes of pseudo random
3331 2. Server and client random values are sent in the clear in the initial
3334 3. The master secret is derived using the premaster secret (48 bytes in
3335 size for static RSA ciphersuites) as well as client server and random
3338 The OpenSSL team would like to thank the UK NISCC for bringing this issue
3341 [Stephen Henson, reported by UK NISCC]
3343 *) Use Windows randomness collection on Cygwin.
3346 *) Fix hang in EGD/PRNGD query when communication socket is closed
3347 prematurely by EGD/PRNGD.
3348 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
3350 *) Prompt for pass phrases when appropriate for PKCS12 input format.
3353 *) Back-port of selected performance improvements from development
3354 branch, as well as improved support for PowerPC platforms.
3357 *) Add lots of checks for memory allocation failure, error codes to indicate
3358 failure and freeing up memory if a failure occurs.
3359 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
3361 *) Add new -passin argument to dgst.
3364 *) Perform some character comparisons of different types in X509_NAME_cmp:
3365 this is needed for some certificates that reencode DNs into UTF8Strings
3366 (in violation of RFC3280) and can't or wont issue name rollover
3370 *) Make an explicit check during certificate validation to see that
3371 the CA setting in each certificate on the chain is correct. As a
3372 side effect always do the following basic checks on extensions,
3373 not just when there's an associated purpose to the check:
3375 - if there is an unhandled critical extension (unless the user
3376 has chosen to ignore this fault)
3377 - if the path length has been exceeded (if one is set at all)
3378 - that certain extensions fit the associated purpose (if one has
3382 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
3384 *) Avoid a race condition when CRLs are checked in a multi threaded
3385 environment. This would happen due to the reordering of the revoked
3386 entries during signature checking and serial number lookup. Now the
3387 encoding is cached and the serial number sort performed under a lock.
3388 Add new STACK function sk_is_sorted().
3391 *) Add Delta CRL to the extension code.
3394 *) Various fixes to s3_pkt.c so alerts are sent properly.
3395 [David Holmes <d.holmes@f5.com>]
3397 *) Reduce the chances of duplicate issuer name and serial numbers (in
3398 violation of RFC3280) using the OpenSSL certificate creation utilities.
3399 This is done by creating a random 64 bit value for the initial serial
3400 number when a serial number file is created or when a self signed
3401 certificate is created using 'openssl req -x509'. The initial serial
3402 number file is created using 'openssl x509 -next_serial' in CA.pl
3403 rather than being initialized to 1.
3406 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
3408 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3409 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3410 [Joe Orton, Steve Henson]
3412 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
3414 [Joe Orton, Steve Henson]
3416 *) Make it possible to have multiple active certificates with the same
3417 subject in the CA index file. This is done only if the keyword
3418 'unique_subject' is set to 'no' in the main CA section (default
3419 if 'CA_default') of the configuration file. The value is saved
3420 with the database itself in a separate index attribute file,
3421 named like the index file with '.attr' appended to the name.
3424 *) X509 verify fixes. Disable broken certificate workarounds when
3425 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
3426 keyUsage extension present. Don't accept CRLs with unhandled critical
3427 extensions: since verify currently doesn't process CRL extensions this
3428 rejects a CRL with *any* critical extensions. Add new verify error codes
3432 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
3433 A clarification of RFC2560 will require the use of OCTET STRINGs and
3434 some implementations cannot handle the current raw format. Since OpenSSL
3435 copies and compares OCSP nonces as opaque blobs without any attempt at
3436 parsing them this should not create any compatibility issues.
3439 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
3440 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
3441 this HMAC (and other) operations are several times slower than OpenSSL
3445 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
3446 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3448 *) Use the correct content when signing type "other".
3451 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
3453 *) Fix various bugs revealed by running the NISCC test suite:
3455 Stop out of bounds reads in the ASN1 code when presented with
3456 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3458 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
3460 If verify callback ignores invalid public key errors don't try to check
3461 certificate signature with the NULL public key.
3465 *) New -ignore_err option in ocsp application to stop the server
3466 exiting on the first error in a request.
3469 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3470 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3474 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3475 extra data after the compression methods not only for TLS 1.0
3476 but also for SSL 3.0 (as required by the specification).
3477 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3479 *) Change X509_certificate_type() to mark the key as exported/exportable
3480 when it's 512 *bits* long, not 512 bytes.
3483 *) Change AES_cbc_encrypt() so it outputs exact multiple of
3484 blocks during encryption.
3487 *) Various fixes to base64 BIO and non blocking I/O. On write
3488 flushes were not handled properly if the BIO retried. On read
3489 data was not being buffered properly and had various logic bugs.
3490 This also affects blocking I/O when the data being decoded is a
3494 *) Various S/MIME bugfixes and compatibility changes:
3495 output correct application/pkcs7 MIME type if
3496 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
3497 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
3498 of files as .eml work). Correctly handle very long lines in MIME
3502 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
3504 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3505 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3506 a protocol version number mismatch like a decryption error
3507 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3510 *) Turn on RSA blinding by default in the default implementation
3511 to avoid a timing attack. Applications that don't want it can call
3512 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3513 They would be ill-advised to do so in most cases.
3514 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3516 *) Change RSA blinding code so that it works when the PRNG is not
3517 seeded (in this case, the secret RSA exponent is abused as
3518 an unpredictable seed -- if it is not unpredictable, there
3519 is no point in blinding anyway). Make RSA blinding thread-safe
3520 by remembering the creator's thread ID in rsa->blinding and
3521 having all other threads use local one-time blinding factors
3522 (this requires more computation than sharing rsa->blinding, but
3523 avoids excessive locking; and if an RSA object is not shared
3524 between threads, blinding will still be very fast).
3527 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
3528 ENGINE as defaults for all supported algorithms irrespective of
3529 the 'flags' parameter. 'flags' is now honoured, so applications
3530 should make sure they are passing it correctly.
3533 *) Target "mingw" now allows native Windows code to be generated in
3534 the Cygwin environment as well as with the MinGW compiler.
3537 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
3539 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3540 via timing by performing a MAC computation even if incorrrect
3541 block cipher padding has been found. This is a countermeasure
3542 against active attacks where the attacker has to distinguish
3543 between bad padding and a MAC verification error. (CVE-2003-0078)
3545 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3546 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3547 Martin Vuagnoux (EPFL, Ilion)]
3549 *) Make the no-err option work as intended. The intention with no-err
3550 is not to have the whole error stack handling routines removed from
3551 libcrypto, it's only intended to remove all the function name and
3552 reason texts, thereby removing some of the footprint that may not
3553 be interesting if those errors aren't displayed anyway.
3555 NOTE: it's still possible for any application or module to have it's
3556 own set of error texts inserted. The routines are there, just not
3557 used by default when no-err is given.
3560 *) Add support for FreeBSD on IA64.
3561 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
3563 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
3564 Kerberos function mit_des_cbc_cksum(). Before this change,
3565 the value returned by DES_cbc_cksum() was like the one from
3566 mit_des_cbc_cksum(), except the bytes were swapped.
3567 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
3569 *) Allow an application to disable the automatic SSL chain building.
3570 Before this a rather primitive chain build was always performed in
3571 ssl3_output_cert_chain(): an application had no way to send the
3572 correct chain if the automatic operation produced an incorrect result.
3574 Now the chain builder is disabled if either:
3576 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
3578 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
3580 The reasoning behind this is that an application would not want the
3581 auto chain building to take place if extra chain certificates are
3582 present and it might also want a means of sending no additional
3583 certificates (for example the chain has two certificates and the
3587 *) Add the possibility to build without the ENGINE framework.
3588 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3590 *) Under Win32 gmtime() can return NULL: check return value in
3591 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
3594 *) DSA routines: under certain error conditions uninitialized BN objects
3595 could be freed. Solution: make sure initialization is performed early
3596 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
3597 Nils Larsch <nla@trustcenter.de> via PR#459)
3600 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
3601 checked on reconnect on the client side, therefore session resumption
3602 could still fail with a "ssl session id is different" error. This
3603 behaviour is masked when SSL_OP_ALL is used due to
3604 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
3605 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3606 followup to PR #377.
3609 *) IA-32 assembler support enhancements: unified ELF targets, support
3610 for SCO/Caldera platforms, fix for Cygwin shared build.
3613 *) Add support for FreeBSD on sparc64. As a consequence, support for
3614 FreeBSD on non-x86 processors is separate from x86 processors on
3615 the config script, much like the NetBSD support.
3616 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
3618 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
3620 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
3623 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
3624 code (06) was taken as the first octet of the session ID and the last
3625 octet was ignored consequently. As a result SSLv2 client side session
3626 caching could not have worked due to the session ID mismatch between
3628 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3632 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
3633 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
3637 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
3638 seems that in spite of existing for more than a year, many application
3639 author have done nothing to provide the necessary callbacks, which
3640 means that this particular engine will not work properly anywhere.
3641 This is a very unfortunate situation which forces us, in the name
3642 of usability, to give the hw_ncipher.c a static lock, which is part
3644 NOTE: This is for the 0.9.7 series ONLY. This hack will never
3645 appear in 0.9.8 or later. We EXPECT application authors to have
3646 dealt properly with this when 0.9.8 is released (unless we actually
3647 make such changes in the libcrypto locking code that changes will
3648 have to be made anyway).
3651 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
3652 octets have been read, EOF or an error occurs. Without this change
3653 some truncated ASN1 structures will not produce an error.
3656 *) Disable Heimdal support, since it hasn't been fully implemented.
3657 Still give the possibility to force the use of Heimdal, but with
3658 warnings and a request that patches get sent to openssl-dev.
3661 *) Add the VC-CE target, introduce the WINCE sysname, and add
3662 INSTALL.WCE and appropriate conditionals to make it build.
3663 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3665 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
3666 cygssl-x.y.z.dll, where x, y and z are the major, minor and
3667 edit numbers of the version.
3668 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3670 *) Introduce safe string copy and catenation functions
3671 (BUF_strlcpy() and BUF_strlcat()).
3672 [Ben Laurie (CHATS) and Richard Levitte]
3674 *) Avoid using fixed-size buffers for one-line DNs.
3675 [Ben Laurie (CHATS)]
3677 *) Add BUF_MEM_grow_clean() to avoid information leakage when
3678 resizing buffers containing secrets, and use where appropriate.
3679 [Ben Laurie (CHATS)]
3681 *) Avoid using fixed size buffers for configuration file location.
3682 [Ben Laurie (CHATS)]
3684 *) Avoid filename truncation for various CA files.
3685 [Ben Laurie (CHATS)]
3687 *) Use sizeof in preference to magic numbers.
3688 [Ben Laurie (CHATS)]
3690 *) Avoid filename truncation in cert requests.
3691 [Ben Laurie (CHATS)]
3693 *) Add assertions to check for (supposedly impossible) buffer
3695 [Ben Laurie (CHATS)]
3697 *) Don't cache truncated DNS entries in the local cache (this could
3698 potentially lead to a spoofing attack).
3699 [Ben Laurie (CHATS)]
3701 *) Fix various buffers to be large enough for hex/decimal
3702 representations in a platform independent manner.
3703 [Ben Laurie (CHATS)]
3705 *) Add CRYPTO_realloc_clean() to avoid information leakage when
3706 resizing buffers containing secrets, and use where appropriate.
3707 [Ben Laurie (CHATS)]
3709 *) Add BIO_indent() to avoid much slightly worrying code to do
3711 [Ben Laurie (CHATS)]
3713 *) Convert sprintf()/BIO_puts() to BIO_printf().
3714 [Ben Laurie (CHATS)]
3716 *) buffer_gets() could terminate with the buffer only half
3718 [Ben Laurie (CHATS)]
3720 *) Add assertions to prevent user-supplied crypto functions from
3721 overflowing internal buffers by having large block sizes, etc.
3722 [Ben Laurie (CHATS)]
3724 *) New OPENSSL_assert() macro (similar to assert(), but enabled
3726 [Ben Laurie (CHATS)]
3728 *) Eliminate unused copy of key in RC4.
3729 [Ben Laurie (CHATS)]
3731 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
3732 [Ben Laurie (CHATS)]
3734 *) Fix off-by-one error in EGD path.
3735 [Ben Laurie (CHATS)]
3737 *) If RANDFILE path is too long, ignore instead of truncating.
3738 [Ben Laurie (CHATS)]
3740 *) Eliminate unused and incorrectly sized X.509 structure
3742 [Ben Laurie (CHATS)]
3744 *) Eliminate unused and dangerous function knumber().
3745 [Ben Laurie (CHATS)]
3747 *) Eliminate unused and dangerous structure, KSSL_ERR.
3748 [Ben Laurie (CHATS)]
3750 *) Protect against overlong session ID context length in an encoded
3751 session object. Since these are local, this does not appear to be
3753 [Ben Laurie (CHATS)]
3755 *) Change from security patch (see 0.9.6e below) that did not affect
3756 the 0.9.6 release series:
3758 Remote buffer overflow in SSL3 protocol - an attacker could
3759 supply an oversized master key in Kerberos-enabled versions.
3761 [Ben Laurie (CHATS)]
3763 *) Change the SSL kerb5 codes to match RFC 2712.
3766 *) Make -nameopt work fully for req and add -reqopt switch.
3767 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
3769 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
3770 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
3772 *) Make sure tests can be performed even if the corresponding algorithms
3773 have been removed entirely. This was also the last step to make
3774 OpenSSL compilable with DJGPP under all reasonable conditions.
3775 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
3777 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
3778 to allow version independent disabling of normally unselected ciphers,
3779 which may be activated as a side-effect of selecting a single cipher.
3781 (E.g., cipher list string "RSA" enables ciphersuites that are left
3782 out of "ALL" because they do not provide symmetric encryption.
3783 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
3784 [Lutz Jaenicke, Bodo Moeller]
3786 *) Add appropriate support for separate platform-dependent build
3787 directories. The recommended way to make a platform-dependent
3788 build directory is the following (tested on Linux), maybe with
3791 # Place yourself outside of the OpenSSL source tree. In
3792 # this example, the environment variable OPENSSL_SOURCE
3793 # is assumed to contain the absolute OpenSSL source directory.
3794 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
3795 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
3796 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
3797 mkdir -p `dirname $F`
3798 ln -s $OPENSSL_SOURCE/$F $F
3801 To be absolutely sure not to disturb the source tree, a "make clean"
3802 is a good thing. If it isn't successfull, don't worry about it,
3803 it probably means the source directory is very clean.
3806 *) Make sure any ENGINE control commands make local copies of string
3807 pointers passed to them whenever necessary. Otherwise it is possible
3808 the caller may have overwritten (or deallocated) the original string
3809 data when a later ENGINE operation tries to use the stored values.
3810 [Götz Babin-Ebell <babinebell@trustcenter.de>]
3812 *) Improve diagnostics in file reading and command-line digests.
3813 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
3815 *) Add AES modes CFB and OFB to the object database. Correct an
3816 error in AES-CFB decryption.
3819 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
3820 allows existing EVP_CIPHER_CTX structures to be reused after
3821 calling EVP_*Final(). This behaviour is used by encryption
3822 BIOs and some applications. This has the side effect that
3823 applications must explicitly clean up cipher contexts with
3824 EVP_CIPHER_CTX_cleanup() or they will leak memory.
3827 *) Check the values of dna and dnb in bn_mul_recursive before calling
3828 bn_mul_comba (a non zero value means the a or b arrays do not contain
3829 n2 elements) and fallback to bn_mul_normal if either is not zero.
3832 *) Fix escaping of non-ASCII characters when using the -subj option
3833 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
3836 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
3837 form for "surname", serialNumber has no short form.
3838 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
3839 therefore remove "mail" short name for "internet 7".
3840 The OID for unique identifiers in X509 certificates is
3841 x500UniqueIdentifier, not uniqueIdentifier.
3842 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
3845 *) Add an "init" command to the ENGINE config module and auto initialize
3846 ENGINEs. Without any "init" command the ENGINE will be initialized
3847 after all ctrl commands have been executed on it. If init=1 the
3848 ENGINE is initailized at that point (ctrls before that point are run
3849 on the uninitialized ENGINE and after on the initialized one). If
3850 init=0 then the ENGINE will not be iniatialized at all.
3853 *) Fix the 'app_verify_callback' interface so that the user-defined
3854 argument is actually passed to the callback: In the
3855 SSL_CTX_set_cert_verify_callback() prototype, the callback
3856 declaration has been changed from
3859 int (*cb)(X509_STORE_CTX *,void *);
3860 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
3861 i=s->ctx->app_verify_callback(&ctx)
3862 has been changed into
3863 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
3865 To update applications using SSL_CTX_set_cert_verify_callback(),
3866 a dummy argument can be added to their callback functions.
3867 [D. K. Smetters <smetters@parc.xerox.com>]
3869 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
3870 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
3872 *) Add and OPENSSL_LOAD_CONF define which will cause
3873 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
3874 This allows older applications to transparently support certain
3875 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
3876 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
3877 load the config file and OPENSSL_add_all_algorithms_conf() which will
3878 always load it have also been added.
3881 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
3882 Adjust NIDs and EVP layer.
3883 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3885 *) Config modules support in openssl utility.
3887 Most commands now load modules from the config file,
3888 though in a few (such as version) this isn't done
3889 because it couldn't be used for anything.
3891 In the case of ca and req the config file used is
3892 the same as the utility itself: that is the -config
3893 command line option can be used to specify an
3897 *) Move default behaviour from OPENSSL_config(). If appname is NULL
3898 use "openssl_conf" if filename is NULL use default openssl config file.
3901 *) Add an argument to OPENSSL_config() to allow the use of an alternative
3902 config section name. Add a new flag to tolerate a missing config file
3903 and move code to CONF_modules_load_file().
3906 *) Support for crypto accelerator cards from Accelerated Encryption
3907 Processing, www.aep.ie. (Use engine 'aep')
3908 The support was copied from 0.9.6c [engine] and adapted/corrected
3909 to work with the new engine framework.
3910 [AEP Inc. and Richard Levitte]
3912 *) Support for SureWare crypto accelerator cards from Baltimore
3913 Technologies. (Use engine 'sureware')
3914 The support was copied from 0.9.6c [engine] and adapted
3915 to work with the new engine framework.
3918 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
3919 make the newer ENGINE framework commands for the CHIL engine work.
3920 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
3922 *) Make it possible to produce shared libraries on ReliantUNIX.
3923 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
3925 *) Add the configuration target debug-linux-ppro.
3926 Make 'openssl rsa' use the general key loading routines
3927 implemented in apps.c, and make those routines able to
3928 handle the key format FORMAT_NETSCAPE and the variant
3930 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3932 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3933 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3935 *) Add -keyform to rsautl, and document -engine.
3936 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
3938 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
3939 BIO_R_NO_SUCH_FILE error code rather than the generic
3940 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
3943 *) Add new functions
3945 ERR_peek_last_error_line
3946 ERR_peek_last_error_line_data.
3947 These are similar to
3950 ERR_peek_error_line_data,
3951 but report on the latest error recorded rather than the first one
3952 still in the error queue.
3953 [Ben Laurie, Bodo Moeller]
3955 *) default_algorithms option in ENGINE config module. This allows things
3957 default_algorithms = ALL
3958 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
3961 *) Prelminary ENGINE config module.
3964 *) New experimental application configuration code.
3967 *) Change the AES code to follow the same name structure as all other
3968 symmetric ciphers, and behave the same way. Move everything to
3969 the directory crypto/aes, thereby obsoleting crypto/rijndael.
3970 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3972 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
3973 [Ben Laurie and Theo de Raadt]
3975 *) Add option to output public keys in req command.
3976 [Massimiliano Pala madwolf@openca.org]
3978 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
3979 (up to about 10% better than before for P-192 and P-224).
3982 *) New functions/macros
3984 SSL_CTX_set_msg_callback(ctx, cb)
3985 SSL_CTX_set_msg_callback_arg(ctx, arg)
3986 SSL_set_msg_callback(ssl, cb)
3987 SSL_set_msg_callback_arg(ssl, arg)
3989 to request calling a callback function
3991 void cb(int write_p, int version, int content_type,
3992 const void *buf, size_t len, SSL *ssl, void *arg)
3994 whenever a protocol message has been completely received
3995 (write_p == 0) or sent (write_p == 1). Here 'version' is the
3996 protocol version according to which the SSL library interprets
3997 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
3998 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
3999 the content type as defined in the SSL 3.0/TLS 1.0 protocol
4000 specification (change_cipher_spec(20), alert(21), handshake(22)).
4001 'buf' and 'len' point to the actual message, 'ssl' to the
4002 SSL object, and 'arg' is the application-defined value set by
4003 SSL[_CTX]_set_msg_callback_arg().
4005 'openssl s_client' and 'openssl s_server' have new '-msg' options
4006 to enable a callback that displays all protocol messages.
4009 *) Change the shared library support so shared libraries are built as
4010 soon as the corresponding static library is finished, and thereby get
4011 openssl and the test programs linked against the shared library.
4012 This still only happens when the keyword "shard" has been given to
4013 the configuration scripts.
4015 NOTE: shared library support is still an experimental thing, and
4016 backward binary compatibility is still not guaranteed.
4017 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
4019 *) Add support for Subject Information Access extension.
4020 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
4022 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
4023 additional bytes when new memory had to be allocated, not just
4024 when reusing an existing buffer.
4027 *) New command line and configuration option 'utf8' for the req command.
4028 This allows field values to be specified as UTF8 strings.
4031 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
4032 runs for the former and machine-readable output for the latter.
4035 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
4036 of the e-mail address in the DN (i.e., it will go into a certificate
4037 extension only). The new configuration file option 'email_in_dn = no'
4038 has the same effect.
4039 [Massimiliano Pala madwolf@openca.org]
4041 *) Change all functions with names starting with des_ to be starting
4042 with DES_ instead. Add wrappers that are compatible with libdes,
4043 but are named _ossl_old_des_*. Finally, add macros that map the
4044 des_* symbols to the corresponding _ossl_old_des_* if libdes
4045 compatibility is desired. If OpenSSL 0.9.6c compatibility is
4046 desired, the des_* symbols will be mapped to DES_*, with one
4049 Since we provide two compatibility mappings, the user needs to
4050 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
4051 compatibility is desired. The default (i.e., when that macro
4052 isn't defined) is OpenSSL 0.9.6c compatibility.
4054 There are also macros that enable and disable the support of old
4055 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
4056 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
4057 are defined, the default will apply: to support the old des routines.
4059 In either case, one must include openssl/des.h to get the correct
4060 definitions. Do not try to just include openssl/des_old.h, that
4063 NOTE: This is a major break of an old API into a new one. Software
4064 authors are encouraged to switch to the DES_ style functions. Some
4065 time in the future, des_old.h and the libdes compatibility functions
4066 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
4067 default), and then completely removed.
4070 *) Test for certificates which contain unsupported critical extensions.
4071 If such a certificate is found during a verify operation it is
4072 rejected by default: this behaviour can be overridden by either
4073 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
4074 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
4075 X509_supported_extension() has also been added which returns 1 if a
4076 particular extension is supported.
4079 *) Modify the behaviour of EVP cipher functions in similar way to digests
4080 to retain compatibility with existing code.
4083 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
4084 compatibility with existing code. In particular the 'ctx' parameter does
4085 not have to be to be initialized before the call to EVP_DigestInit() and
4086 it is tidied up after a call to EVP_DigestFinal(). New function
4087 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
4088 EVP_MD_CTX_copy() changed to not require the destination to be
4089 initialized valid and new function EVP_MD_CTX_copy_ex() added which
4090 requires the destination to be valid.
4092 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
4093 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
4096 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
4097 so that complete 'Handshake' protocol structures are kept in memory
4098 instead of overwriting 'msg_type' and 'length' with 'body' data.
4101 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
4102 [Massimo Santin via Richard Levitte]
4104 *) Major restructuring to the underlying ENGINE code. This includes
4105 reduction of linker bloat, separation of pure "ENGINE" manipulation
4106 (initialisation, etc) from functionality dealing with implementations
4107 of specific crypto iterfaces. This change also introduces integrated
4108 support for symmetric ciphers and digest implementations - so ENGINEs
4109 can now accelerate these by providing EVP_CIPHER and EVP_MD
4110 implementations of their own. This is detailed in crypto/engine/README
4111 as it couldn't be adequately described here. However, there are a few
4112 API changes worth noting - some RSA, DSA, DH, and RAND functions that
4113 were changed in the original introduction of ENGINE code have now
4114 reverted back - the hooking from this code to ENGINE is now a good
4115 deal more passive and at run-time, operations deal directly with
4116 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
4117 dereferencing through an ENGINE pointer any more. Also, the ENGINE
4118 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
4119 they were not being used by the framework as there is no concept of a
4120 BIGNUM_METHOD and they could not be generalised to the new
4121 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
4122 ENGINE_cpy() has been removed as it cannot be consistently defined in
4126 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
4129 *) Change mkdef.pl to sort symbols that get the same entry number,
4130 and make sure the automatically generated functions ERR_load_*
4131 become part of libeay.num as well.
4134 *) New function SSL_renegotiate_pending(). This returns true once
4135 renegotiation has been requested (either SSL_renegotiate() call
4136 or HelloRequest/ClientHello receveived from the peer) and becomes
4137 false once a handshake has been completed.
4138 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
4139 sends a HelloRequest, but does not ensure that a handshake takes
4140 place. SSL_renegotiate_pending() is useful for checking if the
4141 client has followed the request.)
4144 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
4145 By default, clients may request session resumption even during
4146 renegotiation (if session ID contexts permit); with this option,
4147 session resumption is possible only in the first handshake.
4149 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
4150 more bits available for options that should not be part of
4151 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
4154 *) Add some demos for certificate and certificate request creation.
4157 *) Make maximum certificate chain size accepted from the peer application
4158 settable (SSL*_get/set_max_cert_list()), as proposed by
4159 "Douglas E. Engert" <deengert@anl.gov>.
4162 *) Add support for shared libraries for Unixware-7
4163 (Boyd Lynn Gerber <gerberb@zenez.com>).
4166 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
4167 be done prior to destruction. Use this to unload error strings from
4168 ENGINEs that load their own error strings. NB: This adds two new API
4169 functions to "get" and "set" this destroy handler in an ENGINE.
4172 *) Alter all existing ENGINE implementations (except "openssl" and
4173 "openbsd") to dynamically instantiate their own error strings. This
4174 makes them more flexible to be built both as statically-linked ENGINEs
4175 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
4176 Also, add stub code to each that makes building them as self-contained
4177 shared-libraries easier (see README.ENGINE).
4180 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
4181 implementations into applications that are completely implemented in
4182 self-contained shared-libraries. The "dynamic" ENGINE exposes control
4183 commands that can be used to configure what shared-library to load and
4184 to control aspects of the way it is handled. Also, made an update to
4185 the README.ENGINE file that brings its information up-to-date and
4186 provides some information and instructions on the "dynamic" ENGINE
4187 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
4190 *) Make it possible to unload ranges of ERR strings with a new
4191 "ERR_unload_strings" function.
4194 *) Add a copy() function to EVP_MD.
4197 *) Make EVP_MD routines take a context pointer instead of just the
4198 md_data void pointer.
4201 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
4202 that the digest can only process a single chunk of data
4203 (typically because it is provided by a piece of
4204 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
4205 is only going to provide a single chunk of data, and hence the
4206 framework needn't accumulate the data for oneshot drivers.
4209 *) As with "ERR", make it possible to replace the underlying "ex_data"
4210 functions. This change also alters the storage and management of global
4211 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
4212 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
4213 index counters. The API functions that use this state have been changed
4214 to take a "class_index" rather than pointers to the class's local STACK
4215 and counter, and there is now an API function to dynamically create new
4216 classes. This centralisation allows us to (a) plug a lot of the
4217 thread-safety problems that existed, and (b) makes it possible to clean
4218 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
4219 such data would previously have always leaked in application code and
4220 workarounds were in place to make the memory debugging turn a blind eye
4221 to it. Application code that doesn't use this new function will still
4222 leak as before, but their memory debugging output will announce it now
4223 rather than letting it slide.
4225 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
4226 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
4227 has a return value to indicate success or failure.
4230 *) Make it possible to replace the underlying "ERR" functions such that the
4231 global state (2 LHASH tables and 2 locks) is only used by the "default"
4232 implementation. This change also adds two functions to "get" and "set"
4233 the implementation prior to it being automatically set the first time
4234 any other ERR function takes place. Ie. an application can call "get",
4235 pass the return value to a module it has just loaded, and that module
4236 can call its own "set" function using that value. This means the
4237 module's "ERR" operations will use (and modify) the error state in the
4238 application and not in its own statically linked copy of OpenSSL code.
4241 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
4242 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
4243 the operation, and provides a more encapsulated way for external code
4244 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
4245 to use these functions rather than manually incrementing the counts.
4247 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
4250 *) Add EVP test program.
4253 *) Add symmetric cipher support to ENGINE. Expect the API to change!
4256 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
4257 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
4258 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
4259 These allow a CRL to be built without having to access X509_CRL fields
4260 directly. Modify 'ca' application to use new functions.
4263 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
4264 bug workarounds. Rollback attack detection is a security feature.
4265 The problem will only arise on OpenSSL servers when TLSv1 is not
4266 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
4267 Software authors not wanting to support TLSv1 will have special reasons
4268 for their choice and can explicitly enable this option.
4269 [Bodo Moeller, Lutz Jaenicke]
4271 *) Rationalise EVP so it can be extended: don't include a union of
4272 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
4273 (similar to those existing for EVP_CIPHER_CTX).
4278 EVP_MD_CTX_init(&md); /* new function call */
4279 EVP_DigestInit(&md, EVP_sha1());
4280 EVP_DigestUpdate(&md, in, len);
4281 EVP_DigestFinal(&md, out, NULL);
4282 EVP_MD_CTX_cleanup(&md); /* new function call */
4286 *) Make DES key schedule conform to the usual scheme, as well as
4287 correcting its structure. This means that calls to DES functions
4288 now have to pass a pointer to a des_key_schedule instead of a
4289 plain des_key_schedule (which was actually always a pointer
4292 des_key_schedule ks;
4294 des_set_key_checked(..., &ks);
4295 des_ncbc_encrypt(..., &ks, ...);
4297 (Note that a later change renames 'des_...' into 'DES_...'.)
4300 *) Initial reduction of linker bloat: the use of some functions, such as
4301 PEM causes large amounts of unused functions to be linked in due to
4302 poor organisation. For example pem_all.c contains every PEM function
4303 which has a knock on effect of linking in large amounts of (unused)
4304 ASN1 code. Grouping together similar functions and splitting unrelated
4305 functions prevents this.
4308 *) Cleanup of EVP macros.
4311 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
4312 correct _ecb suffix.
4315 *) Add initial OCSP responder support to ocsp application. The
4316 revocation information is handled using the text based index
4317 use by the ca application. The responder can either handle
4318 requests generated internally, supplied in files (for example
4319 via a CGI script) or using an internal minimal server.
4322 *) Add configuration choices to get zlib compression for TLS.
4325 *) Changes to Kerberos SSL for RFC 2712 compliance:
4326 1. Implemented real KerberosWrapper, instead of just using
4327 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
4328 2. Implemented optional authenticator field of KerberosWrapper.
4330 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
4331 and authenticator structs; see crypto/krb5/.
4333 Generalized Kerberos calls to support multiple Kerberos libraries.
4334 [Vern Staats <staatsvr@asc.hpc.mil>,
4335 Jeffrey Altman <jaltman@columbia.edu>
4336 via Richard Levitte]
4338 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
4339 already does with RSA. testdsa.h now has 'priv_key/pub_key'
4340 values for each of the key sizes rather than having just
4341 parameters (and 'speed' generating keys each time).
4344 *) Speed up EVP routines.
4347 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
4348 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
4349 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
4350 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
4352 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
4353 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
4354 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
4357 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
4359 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
4362 *) Added the OS2-EMX target.
4363 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
4365 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
4366 to support NCONF routines in extension code. New function CONF_set_nconf()
4367 to allow functions which take an NCONF to also handle the old LHASH
4368 structure: this means that the old CONF compatible routines can be
4369 retained (in particular wrt extensions) without having to duplicate the
4370 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
4373 *) Enhance the general user interface with mechanisms for inner control
4374 and with possibilities to have yes/no kind of prompts.
4377 *) Change all calls to low level digest routines in the library and
4378 applications to use EVP. Add missing calls to HMAC_cleanup() and
4379 don't assume HMAC_CTX can be copied using memcpy().
4380 [Verdon Walker <VWalker@novell.com>, Steve Henson]
4382 *) Add the possibility to control engines through control names but with
4383 arbitrary arguments instead of just a string.
4384 Change the key loaders to take a UI_METHOD instead of a callback
4385 function pointer. NOTE: this breaks binary compatibility with earlier
4386 versions of OpenSSL [engine].
4387 Adapt the nCipher code for these new conditions and add a card insertion
4391 *) Enhance the general user interface with mechanisms to better support
4392 dialog box interfaces, application-defined prompts, the possibility
4393 to use defaults (for example default passwords from somewhere else)
4394 and interrupts/cancellations.
4397 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
4398 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
4401 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
4402 tidy up some unnecessarily weird code in 'sk_new()').
4403 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
4405 *) Change the key loading routines for ENGINEs to use the same kind
4406 callback (pem_password_cb) as all other routines that need this
4410 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
4411 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
4412 than this minimum value is recommended.
4415 *) New random seeder for OpenVMS, using the system process statistics
4416 that are easily reachable.
4419 *) Windows apparently can't transparently handle global
4420 variables defined in DLLs. Initialisations such as:
4422 const ASN1_ITEM *it = &ASN1_INTEGER_it;
4424 wont compile. This is used by the any applications that need to
4425 declare their own ASN1 modules. This was fixed by adding the option
4426 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
4427 needed for static libraries under Win32.
4430 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
4431 setting of purpose and trust fields. New X509_STORE trust and
4432 purpose functions and tidy up setting in other SSL functions.
4435 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
4436 structure. These are inherited by X509_STORE_CTX when it is
4437 initialised. This allows various defaults to be set in the
4438 X509_STORE structure (such as flags for CRL checking and custom
4439 purpose or trust settings) for functions which only use X509_STORE_CTX
4440 internally such as S/MIME.
4442 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
4443 trust settings if they are not set in X509_STORE. This allows X509_STORE
4444 purposes and trust (in S/MIME for example) to override any set by default.
4446 Add command line options for CRL checking to smime, s_client and s_server
4450 *) Initial CRL based revocation checking. If the CRL checking flag(s)
4451 are set then the CRL is looked up in the X509_STORE structure and
4452 its validity and signature checked, then if the certificate is found
4453 in the CRL the verify fails with a revoked error.
4455 Various new CRL related callbacks added to X509_STORE_CTX structure.
4457 Command line options added to 'verify' application to support this.
4459 This needs some additional work, such as being able to handle multiple
4460 CRLs with different times, extension based lookup (rather than just
4461 by subject name) and ultimately more complete V2 CRL extension
4465 *) Add a general user interface API (crypto/ui/). This is designed
4466 to replace things like des_read_password and friends (backward
4467 compatibility functions using this new API are provided).
4468 The purpose is to remove prompting functions from the DES code
4469 section as well as provide for prompting through dialog boxes in
4470 a window system and the like.
4473 *) Add "ex_data" support to ENGINE so implementations can add state at a
4474 per-structure level rather than having to store it globally.
4477 *) Make it possible for ENGINE structures to be copied when retrieved by
4478 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
4479 This causes the "original" ENGINE structure to act like a template,
4480 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
4481 operational state can be localised to each ENGINE structure, despite the
4482 fact they all share the same "methods". New ENGINE structures returned in
4483 this case have no functional references and the return value is the single
4484 structural reference. This matches the single structural reference returned
4485 by ENGINE_by_id() normally, when it is incremented on the pre-existing
4489 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
4490 needs to match any other type at all we need to manually clear the
4494 *) Changes to the "openssl engine" utility to include;
4495 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
4496 about an ENGINE's available control commands.
4497 - executing control commands from command line arguments using the
4498 '-pre' and '-post' switches. '-post' is only used if '-t' is
4499 specified and the ENGINE is successfully initialised. The syntax for
4500 the individual commands are colon-separated, for example;
4501 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
4504 *) New dynamic control command support for ENGINEs. ENGINEs can now
4505 declare their own commands (numbers), names (strings), descriptions,
4506 and input types for run-time discovery by calling applications. A
4507 subset of these commands are implicitly classed as "executable"
4508 depending on their input type, and only these can be invoked through
4509 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
4510 can be based on user input, config files, etc). The distinction is
4511 that "executable" commands cannot return anything other than a boolean
4512 result and can only support numeric or string input, whereas some
4513 discoverable commands may only be for direct use through
4514 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
4515 pointers, or other custom uses. The "executable" commands are to
4516 support parameterisations of ENGINE behaviour that can be
4517 unambiguously defined by ENGINEs and used consistently across any
4518 OpenSSL-based application. Commands have been added to all the
4519 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
4520 control over shared-library paths without source code alterations.
4523 *) Changed all ENGINE implementations to dynamically allocate their
4524 ENGINEs rather than declaring them statically. Apart from this being
4525 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
4526 this also allows the implementations to compile without using the
4527 internal engine_int.h header.
4530 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
4531 'const' value. Any code that should be able to modify a RAND_METHOD
4532 should already have non-const pointers to it (ie. they should only
4533 modify their own ones).
4536 *) Made a variety of little tweaks to the ENGINE code.
4537 - "atalla" and "ubsec" string definitions were moved from header files
4538 to C code. "nuron" string definitions were placed in variables
4539 rather than hard-coded - allowing parameterisation of these values
4540 later on via ctrl() commands.
4541 - Removed unused "#if 0"'d code.
4542 - Fixed engine list iteration code so it uses ENGINE_free() to release
4543 structural references.
4544 - Constified the RAND_METHOD element of ENGINE structures.
4545 - Constified various get/set functions as appropriate and added
4546 missing functions (including a catch-all ENGINE_cpy that duplicates
4547 all ENGINE values onto a new ENGINE except reference counts/state).
4548 - Removed NULL parameter checks in get/set functions. Setting a method
4549 or function to NULL is a way of cancelling out a previously set
4550 value. Passing a NULL ENGINE parameter is just plain stupid anyway
4551 and doesn't justify the extra error symbols and code.
4552 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
4553 flags from engine_int.h to engine.h.
4554 - Changed prototypes for ENGINE handler functions (init(), finish(),
4555 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
4558 *) Implement binary inversion algorithm for BN_mod_inverse in addition
4559 to the algorithm using long division. The binary algorithm can be
4560 used only if the modulus is odd. On 32-bit systems, it is faster
4561 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
4562 roughly 5-15% for 256-bit moduli), so we use it only for moduli
4563 up to 450 bits. In 64-bit environments, the binary algorithm
4564 appears to be advantageous for much longer moduli; here we use it
4565 for moduli up to 2048 bits.
4568 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
4569 could not support the combine flag in choice fields.
4572 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
4573 extensions from a certificate request to the certificate.
4576 *) Allow multiple 'certopt' and 'nameopt' options to be separated
4577 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
4578 file: this allows the display of the certificate about to be
4579 signed to be customised, to allow certain fields to be included
4580 or excluded and extension details. The old system didn't display
4581 multicharacter strings properly, omitted fields not in the policy
4582 and couldn't display additional details such as extensions.
4585 *) Function EC_POINTs_mul for multiple scalar multiplication
4586 of an arbitrary number of elliptic curve points
4587 \sum scalars[i]*points[i],
4588 optionally including the generator defined for the EC_GROUP:
4589 scalar*generator + \sum scalars[i]*points[i].
4591 EC_POINT_mul is a simple wrapper function for the typical case
4592 that the point list has just one item (besides the optional
4596 *) First EC_METHODs for curves over GF(p):
4598 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
4599 operations and provides various method functions that can also
4600 operate with faster implementations of modular arithmetic.
4602 EC_GFp_mont_method() reuses most functions that are part of
4603 EC_GFp_simple_method, but uses Montgomery arithmetic.
4605 [Bodo Moeller; point addition and point doubling
4606 implementation directly derived from source code provided by
4607 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
4609 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
4610 crypto/ec/ec_lib.c):
4612 Curves are EC_GROUP objects (with an optional group generator)
4613 based on EC_METHODs that are built into the library.
4615 Points are EC_POINT objects based on EC_GROUP objects.
4617 Most of the framework would be able to handle curves over arbitrary
4618 finite fields, but as there are no obvious types for fields other
4619 than GF(p), some functions are limited to that for now.
4622 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
4623 that the file contains a complete HTTP response.
4626 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
4627 change the def and num file printf format specifier from "%-40sXXX"
4628 to "%-39s XXX". The latter will always guarantee a space after the
4629 field while the former will cause them to run together if the field
4630 is 40 of more characters long.
4633 *) Constify the cipher and digest 'method' functions and structures
4634 and modify related functions to take constant EVP_MD and EVP_CIPHER
4638 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
4639 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
4642 *) Modify EVP_Digest*() routines so they now return values. Although the
4643 internal software routines can never fail additional hardware versions
4647 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
4649 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
4650 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
4653 ERR_R_NESTED_ASN1_ERROR
4655 ERR_R_MISSING_ASN1_EOS
4656 were 4 .. 9, conflicting with
4657 ERR_LIB_RSA (= ERR_R_RSA_LIB)
4659 ERR_LIB_PEM (= ERR_R_PEM_LIB).
4660 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
4662 Add new error code 'ERR_R_INTERNAL_ERROR'.
4665 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
4669 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
4670 sets the subject name for a new request or supersedes the
4671 subject name in a given request. Formats that can be parsed are
4672 'CN=Some Name, OU=myOU, C=IT'
4674 'CN=Some Name/OU=myOU/C=IT'.
4676 Add options '-batch' and '-verbose' to 'openssl req'.
4677 [Massimiliano Pala <madwolf@hackmasters.net>]
4679 *) Introduce the possibility to access global variables through
4680 functions on platform were that's the best way to handle exporting
4681 global variables in shared libraries. To enable this functionality,
4682 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
4683 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
4684 is normally done by Configure or something similar).
4686 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
4687 in the source file (foo.c) like this:
4689 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
4690 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
4692 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
4693 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
4695 OPENSSL_DECLARE_GLOBAL(int,foo);
4696 #define foo OPENSSL_GLOBAL_REF(foo)
4697 OPENSSL_DECLARE_GLOBAL(double,bar);
4698 #define bar OPENSSL_GLOBAL_REF(bar)
4700 The #defines are very important, and therefore so is including the
4701 header file everywhere where the defined globals are used.
4703 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
4704 of ASN.1 items, but that structure is a bit different.
4706 The largest change is in util/mkdef.pl which has been enhanced with
4707 better and easier to understand logic to choose which symbols should
4708 go into the Windows .def files as well as a number of fixes and code
4709 cleanup (among others, algorithm keywords are now sorted
4710 lexicographically to avoid constant rewrites).
4713 *) In BN_div() keep a copy of the sign of 'num' before writing the
4714 result to 'rm' because if rm==num the value will be overwritten
4715 and produce the wrong result if 'num' is negative: this caused
4716 problems with BN_mod() and BN_nnmod().
4719 *) Function OCSP_request_verify(). This checks the signature on an
4720 OCSP request and verifies the signer certificate. The signer
4721 certificate is just checked for a generic purpose and OCSP request
4725 *) Add OCSP_check_validity() function to check the validity of OCSP
4726 responses. OCSP responses are prepared in real time and may only
4727 be a few seconds old. Simply checking that the current time lies
4728 between thisUpdate and nextUpdate max reject otherwise valid responses
4729 caused by either OCSP responder or client clock inaccuracy. Instead
4730 we allow thisUpdate and nextUpdate to fall within a certain period of
4731 the current time. The age of the response can also optionally be
4732 checked. Two new options -validity_period and -status_age added to
4736 *) If signature or public key algorithm is unrecognized print out its
4737 OID rather that just UNKNOWN.
4740 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
4741 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
4742 ID to be generated from the issuer certificate alone which can then be
4743 passed to OCSP_id_issuer_cmp().
4746 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
4747 ASN1 modules to export functions returning ASN1_ITEM pointers
4748 instead of the ASN1_ITEM structures themselves. This adds several
4749 new macros which allow the underlying ASN1 function/structure to
4750 be accessed transparently. As a result code should not use ASN1_ITEM
4751 references directly (such as &X509_it) but instead use the relevant
4752 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
4753 use of the new ASN1 code on platforms where exporting structures
4754 is problematical (for example in shared libraries) but exporting
4755 functions returning pointers to structures is not.
4758 *) Add support for overriding the generation of SSL/TLS session IDs.
4759 These callbacks can be registered either in an SSL_CTX or per SSL.
4760 The purpose of this is to allow applications to control, if they wish,
4761 the arbitrary values chosen for use as session IDs, particularly as it
4762 can be useful for session caching in multiple-server environments. A
4763 command-line switch for testing this (and any client code that wishes
4764 to use such a feature) has been added to "s_server".
4765 [Geoff Thorpe, Lutz Jaenicke]
4767 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
4768 of the form '#if defined(...) || defined(...) || ...' and
4769 '#if !defined(...) && !defined(...) && ...'. This also avoids
4770 the growing number of special cases it was previously handling.
4773 *) Make all configuration macros available for application by making
4774 sure they are available in opensslconf.h, by giving them names starting
4775 with "OPENSSL_" to avoid conflicts with other packages and by making
4776 sure e_os2.h will cover all platform-specific cases together with
4778 Additionally, it is now possible to define configuration/platform-
4779 specific names (called "system identities"). In the C code, these
4780 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
4781 macro with the name beginning with "OPENSSL_SYS_", which is determined
4782 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
4786 *) New option -set_serial to 'req' and 'x509' this allows the serial
4787 number to use to be specified on the command line. Previously self
4788 signed certificates were hard coded with serial number 0 and the
4789 CA options of 'x509' had to use a serial number in a file which was
4793 *) New options to 'ca' utility to support V2 CRL entry extensions.
4794 Currently CRL reason, invalidity date and hold instruction are
4795 supported. Add new CRL extensions to V3 code and some new objects.
4798 *) New function EVP_CIPHER_CTX_set_padding() this is used to
4799 disable standard block padding (aka PKCS#5 padding) in the EVP
4800 API, which was previously mandatory. This means that the data is
4801 not padded in any way and so the total length much be a multiple
4802 of the block size, otherwise an error occurs.
4805 *) Initial (incomplete) OCSP SSL support.
4808 *) New function OCSP_parse_url(). This splits up a URL into its host,
4809 port and path components: primarily to parse OCSP URLs. New -url
4810 option to ocsp utility.
4813 *) New nonce behavior. The return value of OCSP_check_nonce() now
4814 reflects the various checks performed. Applications can decide
4815 whether to tolerate certain situations such as an absent nonce
4816 in a response when one was present in a request: the ocsp application
4817 just prints out a warning. New function OCSP_add1_basic_nonce()
4818 this is to allow responders to include a nonce in a response even if
4819 the request is nonce-less.
4822 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
4823 skipped when using openssl x509 multiple times on a single input file,
4824 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
4827 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
4828 set string type: to handle setting ASN1_TIME structures. Fix ca
4829 utility to correctly initialize revocation date of CRLs.
4832 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
4833 the clients preferred ciphersuites and rather use its own preferences.
4834 Should help to work around M$ SGC (Server Gated Cryptography) bug in
4835 Internet Explorer by ensuring unchanged hash method during stepup.
4836 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
4839 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
4840 to aes and add a new 'exist' option to print out symbols that don't
4844 *) Additional options to ocsp utility to allow flags to be set and
4845 additional certificates supplied.
4848 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
4849 OCSP client a number of certificate to only verify the response
4853 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
4854 handle the new API. Currently only ECB, CBC modes supported. Add new
4857 Add TLS AES ciphersuites as described in RFC3268, "Advanced
4858 Encryption Standard (AES) Ciphersuites for Transport Layer
4859 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
4860 not enabled by default and were not part of the "ALL" ciphersuite
4861 alias because they were not yet official; they could be
4862 explicitly requested by specifying the "AESdraft" ciphersuite
4863 group alias. In the final release of OpenSSL 0.9.7, the group
4864 alias is called "AES" and is part of "ALL".)
4865 [Ben Laurie, Steve Henson, Bodo Moeller]
4867 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
4868 request to response.
4871 *) Functions for OCSP responders. OCSP_request_onereq_count(),
4872 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
4873 extract information from a certificate request. OCSP_response_create()
4874 creates a response and optionally adds a basic response structure.
4875 OCSP_basic_add1_status() adds a complete single response to a basic
4876 response and returns the OCSP_SINGLERESP structure just added (to allow
4877 extensions to be included for example). OCSP_basic_add1_cert() adds a
4878 certificate to a basic response and OCSP_basic_sign() signs a basic
4879 response with various flags. New helper functions ASN1_TIME_check()
4880 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
4881 (converts ASN1_TIME to GeneralizedTime).
4884 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
4885 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
4886 structure from a certificate. X509_pubkey_digest() digests the public_key
4887 contents: this is used in various key identifiers.
4890 *) Make sk_sort() tolerate a NULL argument.
4891 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
4893 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
4894 passed by the function are trusted implicitly. If any of them signed the
4895 response then it is assumed to be valid and is not verified.
4898 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
4899 to data. This was previously part of the PKCS7 ASN1 code. This
4900 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
4901 [Steve Henson, reported by Kenneth R. Robinette
4902 <support@securenetterm.com>]
4904 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
4905 routines: without these tracing memory leaks is very painful.
4906 Fix leaks in PKCS12 and PKCS7 routines.
4909 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
4910 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
4911 effectively meant GeneralizedTime would never be used. Now it
4912 is initialised to -1 but X509_time_adj() now has to check the value
4913 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
4914 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
4915 [Steve Henson, reported by Kenneth R. Robinette
4916 <support@securenetterm.com>]
4918 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
4919 result in a zero length in the ASN1_INTEGER structure which was
4920 not consistent with the structure when d2i_ASN1_INTEGER() was used
4921 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
4922 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
4923 where it did not print out a minus for negative ASN1_INTEGER.
4926 *) Add summary printout to ocsp utility. The various functions which
4927 convert status values to strings have been renamed to:
4928 OCSP_response_status_str(), OCSP_cert_status_str() and
4929 OCSP_crl_reason_str() and are no longer static. New options
4930 to verify nonce values and to disable verification. OCSP response
4931 printout format cleaned up.
4934 *) Add additional OCSP certificate checks. These are those specified
4935 in RFC2560. This consists of two separate checks: the CA of the
4936 certificate being checked must either be the OCSP signer certificate
4937 or the issuer of the OCSP signer certificate. In the latter case the
4938 OCSP signer certificate must contain the OCSP signing extended key
4939 usage. This check is performed by attempting to match the OCSP
4940 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
4941 in the OCSP_CERTID structures of the response.
4944 *) Initial OCSP certificate verification added to OCSP_basic_verify()
4945 and related routines. This uses the standard OpenSSL certificate
4946 verify routines to perform initial checks (just CA validity) and
4947 to obtain the certificate chain. Then additional checks will be
4948 performed on the chain. Currently the root CA is checked to see
4949 if it is explicitly trusted for OCSP signing. This is used to set
4950 a root CA as a global signing root: that is any certificate that
4951 chains to that CA is an acceptable OCSP signing certificate.
4954 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
4955 extensions from a separate configuration file.
4956 As when reading extensions from the main configuration file,
4957 the '-extensions ...' option may be used for specifying the
4959 [Massimiliano Pala <madwolf@comune.modena.it>]
4961 *) New OCSP utility. Allows OCSP requests to be generated or
4962 read. The request can be sent to a responder and the output
4963 parsed, outputed or printed in text form. Not complete yet:
4964 still needs to check the OCSP response validity.
4967 *) New subcommands for 'openssl ca':
4968 'openssl ca -status <serial>' prints the status of the cert with
4969 the given serial number (according to the index file).
4970 'openssl ca -updatedb' updates the expiry status of certificates
4972 [Massimiliano Pala <madwolf@comune.modena.it>]
4974 *) New '-newreq-nodes' command option to CA.pl. This is like
4975 '-newreq', but calls 'openssl req' with the '-nodes' option
4976 so that the resulting key is not encrypted.
4977 [Damien Miller <djm@mindrot.org>]
4979 *) New configuration for the GNU Hurd.
4980 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
4982 *) Initial code to implement OCSP basic response verify. This
4983 is currently incomplete. Currently just finds the signer's
4984 certificate and verifies the signature on the response.
4987 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
4988 value of OPENSSLDIR. This is available via the new '-d' option
4989 to 'openssl version', and is also included in 'openssl version -a'.
4992 *) Allowing defining memory allocation callbacks that will be given
4993 file name and line number information in additional arguments
4994 (a const char* and an int). The basic functionality remains, as
4995 well as the original possibility to just replace malloc(),
4996 realloc() and free() by functions that do not know about these
4997 additional arguments. To register and find out the current
4998 settings for extended allocation functions, the following
4999 functions are provided:
5001 CRYPTO_set_mem_ex_functions
5002 CRYPTO_set_locked_mem_ex_functions
5003 CRYPTO_get_mem_ex_functions
5004 CRYPTO_get_locked_mem_ex_functions
5006 These work the same way as CRYPTO_set_mem_functions and friends.
5007 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
5008 extended allocation function is enabled.
5009 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
5010 a conventional allocation function is enabled.
5011 [Richard Levitte, Bodo Moeller]
5013 *) Finish off removing the remaining LHASH function pointer casts.
5014 There should no longer be any prototype-casting required when using
5015 the LHASH abstraction, and any casts that remain are "bugs". See
5016 the callback types and macros at the head of lhash.h for details
5017 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
5020 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
5021 If /dev/[u]random devices are not available or do not return enough
5022 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
5024 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
5025 /etc/entropy will be queried once each in this sequence, quering stops
5026 when enough entropy was collected without querying more sockets.
5029 *) Change the Unix RAND_poll() variant to be able to poll several
5030 random devices, as specified by DEVRANDOM, until a sufficient amount
5031 of data has been collected. We spend at most 10 ms on each file
5032 (select timeout) and read in non-blocking mode. DEVRANDOM now
5033 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
5034 (previously it was just the string "/dev/urandom"), so on typical
5035 platforms the 10 ms delay will never occur.
5036 Also separate out the Unix variant to its own file, rand_unix.c.
5037 For VMS, there's a currently-empty rand_vms.c.
5040 *) Move OCSP client related routines to ocsp_cl.c. These
5041 provide utility functions which an application needing
5042 to issue a request to an OCSP responder and analyse the
5043 response will typically need: as opposed to those which an
5044 OCSP responder itself would need which will be added later.
5046 OCSP_request_sign() signs an OCSP request with an API similar
5047 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
5048 response. OCSP_response_get1_basic() extracts basic response
5049 from response. OCSP_resp_find_status(): finds and extracts status
5050 information from an OCSP_CERTID structure (which will be created
5051 when the request structure is built). These are built from lower
5052 level functions which work on OCSP_SINGLERESP structures but
5053 wont normally be used unless the application wishes to examine
5054 extensions in the OCSP response for example.
5056 Replace nonce routines with a pair of functions.
5057 OCSP_request_add1_nonce() adds a nonce value and optionally
5058 generates a random value. OCSP_check_nonce() checks the
5059 validity of the nonce in an OCSP response.
5062 *) Change function OCSP_request_add() to OCSP_request_add0_id().
5063 This doesn't copy the supplied OCSP_CERTID and avoids the
5064 need to free up the newly created id. Change return type
5065 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
5066 This can then be used to add extensions to the request.
5067 Deleted OCSP_request_new(), since most of its functionality
5068 is now in OCSP_REQUEST_new() (and the case insensitive name
5069 clash) apart from the ability to set the request name which
5070 will be added elsewhere.
5073 *) Update OCSP API. Remove obsolete extensions argument from
5074 various functions. Extensions are now handled using the new
5075 OCSP extension code. New simple OCSP HTTP function which
5076 can be used to send requests and parse the response.
5079 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
5080 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
5081 uses the special reorder version of SET OF to sort the attributes
5082 and reorder them to match the encoded order. This resolves a long
5083 standing problem: a verify on a PKCS7 structure just after signing
5084 it used to fail because the attribute order did not match the
5085 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
5086 it uses the received order. This is necessary to tolerate some broken
5087 software that does not order SET OF. This is handled by encoding
5088 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
5089 to produce the required SET OF.
5092 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
5093 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
5094 files to get correct declarations of the ASN.1 item variables.
5097 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
5098 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
5099 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
5100 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
5101 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
5102 ASN1_ITEM and no wrapper functions.
5105 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
5106 replace the old function pointer based I/O routines. Change most of
5107 the *_d2i_bio() and *_d2i_fp() functions to use these.
5110 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
5111 lines, recognice more "algorithms" that can be deselected, and make
5112 it complain about algorithm deselection that isn't recognised.
5115 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
5116 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
5117 to use new functions. Add NO_ASN1_OLD which can be set to remove
5118 some old style ASN1 functions: this can be used to determine if old
5119 code will still work when these eventually go away.
5122 *) New extension functions for OCSP structures, these follow the
5123 same conventions as certificates and CRLs.
5126 *) New function X509V3_add1_i2d(). This automatically encodes and
5127 adds an extension. Its behaviour can be customised with various
5128 flags to append, replace or delete. Various wrappers added for
5129 certifcates and CRLs.
5132 *) Fix to avoid calling the underlying ASN1 print routine when
5133 an extension cannot be parsed. Correct a typo in the
5134 OCSP_SERVICELOC extension. Tidy up print OCSP format.
5137 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
5138 entries for variables.
5141 *) Add functionality to apps/openssl.c for detecting locking
5142 problems: As the program is single-threaded, all we have
5143 to do is register a locking callback using an array for
5144 storing which locks are currently held by the program.
5147 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
5148 SSL_get_ex_data_X509_STORE_idx(), which is used in
5149 ssl_verify_cert_chain() and thus can be called at any time
5150 during TLS/SSL handshakes so that thread-safety is essential.
5151 Unfortunately, the ex_data design is not at all suited
5152 for multi-threaded use, so it probably should be abolished.
5155 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
5156 [Broadcom, tweaked and integrated by Geoff Thorpe]
5158 *) Move common extension printing code to new function
5159 X509V3_print_extensions(). Reorganise OCSP print routines and
5160 implement some needed OCSP ASN1 functions. Add OCSP extensions.
5163 *) New function X509_signature_print() to remove duplication in some
5167 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
5168 set (this was treated exactly the same as SET OF previously). This
5169 is used to reorder the STACK representing the structure to match the
5170 encoding. This will be used to get round a problem where a PKCS7
5171 structure which was signed could not be verified because the STACK
5172 order did not reflect the encoded order.
5175 *) Reimplement the OCSP ASN1 module using the new code.
5178 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
5179 for its ASN1 operations. The old style function pointers still exist
5180 for now but they will eventually go away.
5183 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
5184 completely replaces the old ASN1 functionality with a table driven
5185 encoder and decoder which interprets an ASN1_ITEM structure describing
5186 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
5187 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
5188 has also been converted to the new form.
5191 *) Change BN_mod_exp_recp so that negative moduli are tolerated
5192 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
5193 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
5194 for negative moduli.
5197 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
5198 of not touching the result's sign bit.
5201 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
5205 *) Changed the LHASH code to use prototypes for callbacks, and created
5206 macros to declare and implement thin (optionally static) functions
5207 that provide type-safety and avoid function pointer casting for the
5208 type-specific callbacks.
5211 *) Added Kerberos Cipher Suites to be used with TLS, as written in
5213 [Veers Staats <staatsvr@asc.hpc.mil>,
5214 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
5216 *) Reformat the FAQ so the different questions and answers can be divided
5217 in sections depending on the subject.
5220 *) Have the zlib compression code load ZLIB.DLL dynamically under
5224 *) New function BN_mod_sqrt for computing square roots modulo a prime
5225 (using the probabilistic Tonelli-Shanks algorithm unless
5226 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
5227 be handled deterministically).
5228 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5230 *) Make BN_mod_inverse faster by explicitly handling small quotients
5231 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
5232 512 bits], about 30% for larger ones [1024 or 2048 bits].)
5235 *) New function BN_kronecker.
5238 *) Fix BN_gcd so that it works on negative inputs; the result is
5239 positive unless both parameters are zero.
5240 Previously something reasonably close to an infinite loop was
5241 possible because numbers could be growing instead of shrinking
5242 in the implementation of Euclid's algorithm.
5245 *) Fix BN_is_word() and BN_is_one() macros to take into account the
5246 sign of the number in question.
5248 Fix BN_is_word(a,w) to work correctly for w == 0.
5250 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
5251 because its test if the absolute value of 'a' equals 'w'.
5252 Note that BN_abs_is_word does *not* handle w == 0 reliably;
5253 it exists mostly for use in the implementations of BN_is_zero(),
5254 BN_is_one(), and BN_is_word().
5257 *) New function BN_swap.
5260 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
5261 the exponentiation functions are more likely to produce reasonable
5262 results on negative inputs.
5265 *) Change BN_mod_mul so that the result is always non-negative.
5266 Previously, it could be negative if one of the factors was negative;
5267 I don't think anyone really wanted that behaviour.
5270 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
5271 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
5272 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
5273 and add new functions:
5282 BN_mod_lshift1_quick
5286 These functions always generate non-negative results.
5288 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
5289 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
5291 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
5292 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
5293 be reduced modulo m.
5294 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5297 The following entry accidentily appeared in the CHANGES file
5298 distributed with OpenSSL 0.9.7. The modifications described in
5299 it do *not* apply to OpenSSL 0.9.7.
5301 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5302 was actually never needed) and in BN_mul(). The removal in BN_mul()
5303 required a small change in bn_mul_part_recursive() and the addition
5304 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5305 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5306 bn_sub_words() and bn_add_words() except they take arrays with
5311 *) In 'openssl passwd', verify passwords read from the terminal
5312 unless the '-salt' option is used (which usually means that
5313 verification would just waste user's time since the resulting
5314 hash is going to be compared with some given password hash)
5315 or the new '-noverify' option is used.
5317 This is an incompatible change, but it does not affect
5318 non-interactive use of 'openssl passwd' (passwords on the command
5319 line, '-stdin' option, '-in ...' option) and thus should not
5323 *) Remove all references to RSAref, since there's no more need for it.
5326 *) Make DSO load along a path given through an environment variable
5327 (SHLIB_PATH) with shl_load().
5330 *) Constify the ENGINE code as a result of BIGNUM constification.
5331 Also constify the RSA code and most things related to it. In a
5332 few places, most notable in the depth of the ASN.1 code, ugly
5333 casts back to non-const were required (to be solved at a later
5337 *) Make it so the openssl application has all engines loaded by default.
5340 *) Constify the BIGNUM routines a little more.
5343 *) Add the following functions:
5345 ENGINE_load_cswift()
5347 ENGINE_load_atalla()
5349 ENGINE_load_builtin_engines()
5351 That way, an application can itself choose if external engines that
5352 are built-in in OpenSSL shall ever be used or not. The benefit is
5353 that applications won't have to be linked with libdl or other dso
5354 libraries unless it's really needed.
5356 Changed 'openssl engine' to load all engines on demand.
5357 Changed the engine header files to avoid the duplication of some
5358 declarations (they differed!).
5361 *) 'openssl engine' can now list capabilities.
5364 *) Better error reporting in 'openssl engine'.
5367 *) Never call load_dh_param(NULL) in s_server.
5370 *) Add engine application. It can currently list engines by name and
5371 identity, and test if they are actually available.
5374 *) Improve RPM specification file by forcing symbolic linking and making
5375 sure the installed documentation is also owned by root.root.
5376 [Damien Miller <djm@mindrot.org>]
5378 *) Give the OpenSSL applications more possibilities to make use of
5379 keys (public as well as private) handled by engines.
5382 *) Add OCSP code that comes from CertCo.
5385 *) Add VMS support for the Rijndael code.
5388 *) Added untested support for Nuron crypto accelerator.
5391 *) Add support for external cryptographic devices. This code was
5392 previously distributed separately as the "engine" branch.
5393 [Geoff Thorpe, Richard Levitte]
5395 *) Rework the filename-translation in the DSO code. It is now possible to
5396 have far greater control over how a "name" is turned into a filename
5397 depending on the operating environment and any oddities about the
5398 different shared library filenames on each system.
5401 *) Support threads on FreeBSD-elf in Configure.
5404 *) Fix for SHA1 assembly problem with MASM: it produces
5405 warnings about corrupt line number information when assembling
5406 with debugging information. This is caused by the overlapping
5408 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
5411 NCONF_get_number() has no error checking at all. As a replacement,
5412 NCONF_get_number_e() is defined (_e for "error checking") and is
5413 promoted strongly. The old NCONF_get_number is kept around for
5414 binary backward compatibility.
5415 Make it possible for methods to load from something other than a BIO,
5416 by providing a function pointer that is given a name instead of a BIO.
5417 For example, this could be used to load configuration data from an
5421 *) Fix for non blocking accept BIOs. Added new I/O special reason
5422 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
5423 with non blocking I/O was not possible because no retry code was
5424 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
5428 *) Added the beginnings of Rijndael support.
5431 *) Fix for bug in DirectoryString mask setting. Add support for
5432 X509_NAME_print_ex() in 'req' and X509_print_ex() function
5433 to allow certificate printing to more controllable, additional
5434 'certopt' option to 'x509' to allow new printing options to be
5438 *) Clean old EAY MD5 hack from e_os.h.
5441 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
5443 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5444 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5445 [Joe Orton, Steve Henson]
5447 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
5449 *) Fix additional bug revealed by the NISCC test suite:
5451 Stop bug triggering large recursion when presented with
5452 certain ASN.1 tags (CVE-2003-0851)
5455 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
5457 *) Fix various bugs revealed by running the NISCC test suite:
5459 Stop out of bounds reads in the ASN1 code when presented with
5460 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5462 If verify callback ignores invalid public key errors don't try to check
5463 certificate signature with the NULL public key.
5467 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5468 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5472 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5473 extra data after the compression methods not only for TLS 1.0
5474 but also for SSL 3.0 (as required by the specification).
5475 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5477 *) Change X509_certificate_type() to mark the key as exported/exportable
5478 when it's 512 *bits* long, not 512 bytes.
5481 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
5483 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5484 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5485 a protocol version number mismatch like a decryption error
5486 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5489 *) Turn on RSA blinding by default in the default implementation
5490 to avoid a timing attack. Applications that don't want it can call
5491 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5492 They would be ill-advised to do so in most cases.
5493 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5495 *) Change RSA blinding code so that it works when the PRNG is not
5496 seeded (in this case, the secret RSA exponent is abused as
5497 an unpredictable seed -- if it is not unpredictable, there
5498 is no point in blinding anyway). Make RSA blinding thread-safe
5499 by remembering the creator's thread ID in rsa->blinding and
5500 having all other threads use local one-time blinding factors
5501 (this requires more computation than sharing rsa->blinding, but
5502 avoids excessive locking; and if an RSA object is not shared
5503 between threads, blinding will still be very fast).
5506 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
5508 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5509 via timing by performing a MAC computation even if incorrrect
5510 block cipher padding has been found. This is a countermeasure
5511 against active attacks where the attacker has to distinguish
5512 between bad padding and a MAC verification error. (CVE-2003-0078)
5514 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5515 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5516 Martin Vuagnoux (EPFL, Ilion)]
5518 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
5520 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
5521 memory from it's contents. This is done with a counter that will
5522 place alternating values in each byte. This can be used to solve
5523 two issues: 1) the removal of calls to memset() by highly optimizing
5524 compilers, and 2) cleansing with other values than 0, since those can
5525 be read through on certain media, for example a swap space on disk.
5528 *) Bugfix: client side session caching did not work with external caching,
5529 because the session->cipher setting was not restored when reloading
5530 from the external cache. This problem was masked, when
5531 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
5532 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
5535 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
5536 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
5537 [Zeev Lieber <zeev-l@yahoo.com>]
5539 *) Undo an undocumented change introduced in 0.9.6e which caused
5540 repeated calls to OpenSSL_add_all_ciphers() and
5541 OpenSSL_add_all_digests() to be ignored, even after calling
5545 *) Change the default configuration reader to deal with last line not
5546 being properly terminated.
5549 *) Change X509_NAME_cmp() so it applies the special rules on handling
5550 DN values that are of type PrintableString, as well as RDNs of type
5551 emailAddress where the value has the type ia5String.
5552 [stefank@valicert.com via Richard Levitte]
5554 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
5555 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
5556 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
5557 the bitwise-OR of the two for use by the majority of applications
5558 wanting this behaviour, and update the docs. The documented
5559 behaviour and actual behaviour were inconsistent and had been
5560 changing anyway, so this is more a bug-fix than a behavioural
5562 [Geoff Thorpe, diagnosed by Nadav Har'El]
5564 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
5565 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
5568 *) Fix initialization code race conditions in
5569 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
5570 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
5571 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
5572 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
5573 ssl2_get_cipher_by_char(),
5574 ssl3_get_cipher_by_char().
5575 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
5577 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
5578 the cached sessions are flushed, as the remove_cb() might use ex_data
5579 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
5580 (see [openssl.org #212]).
5581 [Geoff Thorpe, Lutz Jaenicke]
5583 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
5584 length, instead of the encoding length to d2i_ASN1_OBJECT.
5587 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
5589 *) [In 0.9.6g-engine release:]
5590 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
5591 [Lynn Gazis <lgazis@rainbow.com>]
5593 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
5595 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
5596 and get fix the header length calculation.
5597 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
5598 Alon Kantor <alonk@checkpoint.com> (and others),
5601 *) Use proper error handling instead of 'assertions' in buffer
5602 overflow checks added in 0.9.6e. This prevents DoS (the
5603 assertions could call abort()).
5604 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
5606 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
5608 *) Add various sanity checks to asn1_get_length() to reject
5609 the ASN1 length bytes if they exceed sizeof(long), will appear
5610 negative or the content length exceeds the length of the
5612 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5614 *) Fix cipher selection routines: ciphers without encryption had no flags
5615 for the cipher strength set and where therefore not handled correctly
5616 by the selection routines (PR #130).
5619 *) Fix EVP_dsa_sha macro.
5623 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
5624 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
5625 that was added in OpenSSL 0.9.6d.
5627 As the countermeasure turned out to be incompatible with some
5628 broken SSL implementations, the new option is part of SSL_OP_ALL.
5629 SSL_OP_ALL is usually employed when compatibility with weird SSL
5630 implementations is desired (e.g. '-bugs' option to 's_client' and
5631 's_server'), so the new option is automatically set in many
5635 *) Changes in security patch:
5637 Changes marked "(CHATS)" were sponsored by the Defense Advanced
5638 Research Projects Agency (DARPA) and Air Force Research Laboratory,
5639 Air Force Materiel Command, USAF, under agreement number
5642 *) Add various sanity checks to asn1_get_length() to reject
5643 the ASN1 length bytes if they exceed sizeof(long), will appear
5644 negative or the content length exceeds the length of the
5645 supplied buffer. (CVE-2002-0659)
5646 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5648 *) Assertions for various potential buffer overflows, not known to
5650 [Ben Laurie (CHATS)]
5652 *) Various temporary buffers to hold ASCII versions of integers were
5653 too small for 64 bit platforms. (CVE-2002-0655)
5654 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
5656 *) Remote buffer overflow in SSL3 protocol - an attacker could
5657 supply an oversized session ID to a client. (CVE-2002-0656)
5658 [Ben Laurie (CHATS)]
5660 *) Remote buffer overflow in SSL2 protocol - an attacker could
5661 supply an oversized client master key. (CVE-2002-0656)
5662 [Ben Laurie (CHATS)]
5664 Changes between 0.9.6c and 0.9.6d [9 May 2002]
5666 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
5667 encoded as NULL) with id-dsa-with-sha1.
5668 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
5670 *) Check various X509_...() return values in apps/req.c.
5671 [Nils Larsch <nla@trustcenter.de>]
5673 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
5674 an end-of-file condition would erronously be flagged, when the CRLF
5675 was just at the end of a processed block. The bug was discovered when
5676 processing data through a buffering memory BIO handing the data to a
5677 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
5678 <ptsekov@syntrex.com> and Nedelcho Stanev.
5681 *) Implement a countermeasure against a vulnerability recently found
5682 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
5683 before application data chunks to avoid the use of known IVs
5684 with data potentially chosen by the attacker.
5687 *) Fix length checks in ssl3_get_client_hello().
5690 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
5691 to prevent ssl3_read_internal() from incorrectly assuming that
5692 ssl3_read_bytes() found application data while handshake
5693 processing was enabled when in fact s->s3->in_read_app_data was
5694 merely automatically cleared during the initial handshake.
5695 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
5697 *) Fix object definitions for Private and Enterprise: they were not
5698 recognized in their shortname (=lowercase) representation. Extend
5699 obj_dat.pl to issue an error when using undefined keywords instead
5700 of silently ignoring the problem (Svenning Sorensen
5701 <sss@sss.dnsalias.net>).
5704 *) Fix DH_generate_parameters() so that it works for 'non-standard'
5705 generators, i.e. generators other than 2 and 5. (Previously, the
5706 code did not properly initialise the 'add' and 'rem' values to
5707 BN_generate_prime().)
5709 In the new general case, we do not insist that 'generator' is
5710 actually a primitive root: This requirement is rather pointless;
5711 a generator of the order-q subgroup is just as good, if not
5715 *) Map new X509 verification errors to alerts. Discovered and submitted by
5716 Tom Wu <tom@arcot.com>.
5719 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
5720 returning non-zero before the data has been completely received
5721 when using non-blocking I/O.
5722 [Bodo Moeller; problem pointed out by John Hughes]
5724 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
5725 [Ben Laurie, Lutz Jaenicke]
5727 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
5728 Yoram Zahavi <YoramZ@gilian.com>).
5731 *) Add information about CygWin 1.3 and on, and preserve proper
5732 configuration for the versions before that.
5733 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
5735 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
5736 check whether we deal with a copy of a session and do not delete from
5737 the cache in this case. Problem reported by "Izhar Shoshani Levi"
5738 <izhar@checkpoint.com>.
5741 *) Do not store session data into the internal session cache, if it
5742 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
5743 flag is set). Proposed by Aslam <aslam@funk.com>.
5746 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
5750 *) [In 0.9.6d-engine release:]
5751 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
5752 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5754 *) Add the configuration target linux-s390x.
5755 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
5757 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
5758 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
5759 variable as an indication that a ClientHello message has been
5760 received. As the flag value will be lost between multiple
5761 invocations of ssl3_accept when using non-blocking I/O, the
5762 function may not be aware that a handshake has actually taken
5763 place, thus preventing a new session from being added to the
5766 To avoid this problem, we now set s->new_session to 2 instead of
5767 using a local variable.
5768 [Lutz Jaenicke, Bodo Moeller]
5770 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
5771 if the SSL_R_LENGTH_MISMATCH error is detected.
5772 [Geoff Thorpe, Bodo Moeller]
5774 *) New 'shared_ldflag' column in Configure platform table.
5777 *) Fix EVP_CIPHER_mode macro.
5778 ["Dan S. Camper" <dan@bti.net>]
5780 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
5781 type, we must throw them away by setting rr->length to 0.
5782 [D P Chang <dpc@qualys.com>]
5784 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
5786 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
5787 <Dominikus.Scherkl@biodata.com>. (The previous implementation
5788 worked incorrectly for those cases where range = 10..._2 and
5789 3*range is two bits longer than range.)
5792 *) Only add signing time to PKCS7 structures if it is not already
5796 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
5797 OBJ_ld_ce should be OBJ_id_ce.
5798 Also some ip-pda OIDs in crypto/objects/objects.txt were
5799 incorrect (cf. RFC 3039).
5800 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
5802 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
5803 returns early because it has nothing to do.
5804 [Andy Schneider <andy.schneider@bjss.co.uk>]
5806 *) [In 0.9.6c-engine release:]
5807 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
5808 [Andy Schneider <andy.schneider@bjss.co.uk>]
5810 *) [In 0.9.6c-engine release:]
5811 Add support for Cryptographic Appliance's keyserver technology.
5812 (Use engine 'keyclient')
5813 [Cryptographic Appliances and Geoff Thorpe]
5815 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
5816 is called via tools/c89.sh because arguments have to be
5817 rearranged (all '-L' options must appear before the first object
5819 [Richard Shapiro <rshapiro@abinitio.com>]
5821 *) [In 0.9.6c-engine release:]
5822 Add support for Broadcom crypto accelerator cards, backported
5824 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
5826 *) [In 0.9.6c-engine release:]
5827 Add support for SureWare crypto accelerator cards from
5828 Baltimore Technologies. (Use engine 'sureware')
5829 [Baltimore Technologies and Mark Cox]
5831 *) [In 0.9.6c-engine release:]
5832 Add support for crypto accelerator cards from Accelerated
5833 Encryption Processing, www.aep.ie. (Use engine 'aep')
5834 [AEP Inc. and Mark Cox]
5836 *) Add a configuration entry for gcc on UnixWare.
5837 [Gary Benson <gbenson@redhat.com>]
5839 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
5840 messages are stored in a single piece (fixed-length part and
5841 variable-length part combined) and fix various bugs found on the way.
5844 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
5845 instead. BIO_gethostbyname() does not know what timeouts are
5846 appropriate, so entries would stay in cache even when they have
5848 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
5850 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
5851 faced with a pathologically small ClientHello fragment that does
5852 not contain client_version: Instead of aborting with an error,
5853 simply choose the highest available protocol version (i.e.,
5854 TLS 1.0 unless it is disabled). In practice, ClientHello
5855 messages are never sent like this, but this change gives us
5856 strictly correct behaviour at least for TLS.
5859 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
5860 never resets s->method to s->ctx->method when called from within
5861 one of the SSL handshake functions.
5862 [Bodo Moeller; problem pointed out by Niko Baric]
5864 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
5865 (sent using the client's version number) if client_version is
5866 smaller than the protocol version in use. Also change
5867 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
5868 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
5869 the client will at least see that alert.
5872 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
5876 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
5877 client receives HelloRequest while in a handshake.
5878 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
5880 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
5881 should end in 'break', not 'goto end' which circuments various
5882 cleanups done in state SSL_ST_OK. But session related stuff
5883 must be disabled for SSL_ST_OK in the case that we just sent a
5886 Also avoid some overhead by not calling ssl_init_wbio_buffer()
5887 before just sending a HelloRequest.
5888 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
5890 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
5891 reveal whether illegal block cipher padding was found or a MAC
5892 verification error occured. (Neither SSLerr() codes nor alerts
5893 are directly visible to potential attackers, but the information
5894 may leak via logfiles.)
5896 Similar changes are not required for the SSL 2.0 implementation
5897 because the number of padding bytes is sent in clear for SSL 2.0,
5898 and the extra bytes are just ignored. However ssl/s2_pkt.c
5899 failed to verify that the purported number of padding bytes is in
5903 *) Add OpenUNIX-8 support including shared libraries
5904 (Boyd Lynn Gerber <gerberb@zenez.com>).
5907 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
5908 'wristwatch attack' using huge encoding parameters (cf.
5909 James H. Manger's CRYPTO 2001 paper). Note that the
5910 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
5911 encoding parameters and hence was not vulnerable.
5914 *) BN_sqr() bug fix.
5915 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
5917 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
5918 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
5919 followed by modular reduction.
5920 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
5922 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
5923 equivalent based on BN_pseudo_rand() instead of BN_rand().
5926 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
5927 This function was broken, as the check for a new client hello message
5928 to handle SGC did not allow these large messages.
5929 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
5932 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
5935 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
5936 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
5939 *) Rework the configuration and shared library support for Tru64 Unix.
5940 The configuration part makes use of modern compiler features and
5941 still retains old compiler behavior for those that run older versions
5942 of the OS. The shared library support part includes a variant that
5943 uses the RPATH feature, and is available through the special
5944 configuration target "alpha-cc-rpath", which will never be selected
5946 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
5948 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
5949 with the same message size as in ssl3_get_certificate_request().
5950 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
5951 messages might inadvertently be reject as too long.
5952 [Petr Lampa <lampa@fee.vutbr.cz>]
5954 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
5957 *) Modified SSL library such that the verify_callback that has been set
5958 specificly for an SSL object with SSL_set_verify() is actually being
5959 used. Before the change, a verify_callback set with this function was
5960 ignored and the verify_callback() set in the SSL_CTX at the time of
5961 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
5962 to allow the necessary settings.
5965 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
5966 explicitly to NULL, as at least on Solaris 8 this seems not always to be
5967 done automatically (in contradiction to the requirements of the C
5968 standard). This made problems when used from OpenSSH.
5971 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
5972 dh->length and always used
5974 BN_rand_range(priv_key, dh->p).
5976 BN_rand_range() is not necessary for Diffie-Hellman, and this
5977 specific range makes Diffie-Hellman unnecessarily inefficient if
5978 dh->length (recommended exponent length) is much smaller than the
5979 length of dh->p. We could use BN_rand_range() if the order of
5980 the subgroup was stored in the DH structure, but we only have
5985 BN_rand(priv_key, l, ...)
5987 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
5993 RSA_eay_public_encrypt
5994 RSA_eay_private_decrypt
5995 RSA_eay_private_encrypt (signing)
5996 RSA_eay_public_decrypt (signature verification)
5998 (default implementations for RSA_public_encrypt,
5999 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
6000 always reject numbers >= n.
6003 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
6004 to synchronize access to 'locking_thread'. This is necessary on
6005 systems where access to 'locking_thread' (an 'unsigned long'
6006 variable) is not atomic.
6009 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
6010 *before* setting the 'crypto_lock_rand' flag. The previous code had
6011 a race condition if 0 is a valid thread ID.
6012 [Travis Vitek <vitek@roguewave.com>]
6014 *) Add support for shared libraries under Irix.
6015 [Albert Chin-A-Young <china@thewrittenword.com>]
6017 *) Add configuration option to build on Linux on both big-endian and
6019 [Ralf Baechle <ralf@uni-koblenz.de>]
6021 *) Add the possibility to create shared libraries on HP-UX.
6024 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
6026 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
6027 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
6028 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
6029 PRNG state recovery was possible based on the output of
6030 one PRNG request appropriately sized to gain knowledge on
6031 'md' followed by enough consecutive 1-byte PRNG requests
6032 to traverse all of 'state'.
6034 1. When updating 'md_local' (the current thread's copy of 'md')
6035 during PRNG output generation, hash all of the previous
6036 'md_local' value, not just the half used for PRNG output.
6038 2. Make the number of bytes from 'state' included into the hash
6039 independent from the number of PRNG bytes requested.
6041 The first measure alone would be sufficient to avoid
6042 Markku-Juhani's attack. (Actually it had never occurred
6043 to me that the half of 'md_local' used for chaining was the
6044 half from which PRNG output bytes were taken -- I had always
6045 assumed that the secret half would be used.) The second
6046 measure makes sure that additional data from 'state' is never
6047 mixed into 'md_local' in small portions; this heuristically
6048 further strengthens the PRNG.
6051 *) Fix crypto/bn/asm/mips3.s.
6054 *) When only the key is given to "enc", the IV is undefined. Print out
6055 an error message in this case.
6058 *) Handle special case when X509_NAME is empty in X509 printing routines.
6061 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
6062 positive and less than q.
6065 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
6066 used: it isn't thread safe and the add_lock_callback should handle
6068 [Paul Rose <Paul.Rose@bridge.com>]
6070 *) Verify that incoming data obeys the block size in
6071 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
6075 [Ulf Möller, Bodo Möller]
6077 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
6078 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
6079 when fixing the server behaviour for backwards-compatible 'client
6080 hello' messages. (Note that the attack is impractical against
6081 SSL 3.0 and TLS 1.0 anyway because length and version checking
6082 means that the probability of guessing a valid ciphertext is
6083 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
6086 Before 0.9.5, the countermeasure (hide the error by generating a
6087 random 'decryption result') did not work properly because
6088 ERR_clear_error() was missing, meaning that SSL_get_error() would
6089 detect the supposedly ignored error.
6091 Both problems are now fixed.
6094 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
6095 (previously it was 1024).
6098 *) Fix for compatibility mode trust settings: ignore trust settings
6099 unless some valid trust or reject settings are present.
6102 *) Fix for blowfish EVP: its a variable length cipher.
6105 *) Fix various bugs related to DSA S/MIME verification. Handle missing
6106 parameters in DSA public key structures and return an error in the
6107 DSA routines if parameters are absent.
6110 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
6111 in the current directory if neither $RANDFILE nor $HOME was set.
6112 RAND_file_name() in 0.9.6a returned NULL in this case. This has
6113 caused some confusion to Windows users who haven't defined $HOME.
6114 Thus RAND_file_name() is changed again: e_os.h can define a
6115 DEFAULT_HOME, which will be used if $HOME is not set.
6116 For Windows, we use "C:"; on other platforms, we still require
6117 environment variables.
6119 *) Move 'if (!initialized) RAND_poll()' into regions protected by
6120 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
6121 having multiple threads call RAND_poll() concurrently.
6124 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
6125 combination of a flag and a thread ID variable.
6126 Otherwise while one thread is in ssleay_rand_bytes (which sets the
6127 flag), *other* threads can enter ssleay_add_bytes without obeying
6128 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
6129 that they do not hold after the first thread unsets add_do_not_lock).
6132 *) Change bctest again: '-x' expressions are not available in all
6136 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
6138 *) Fix a couple of memory leaks in PKCS7_dataDecode()
6139 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
6141 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
6142 the default extension for executables, if any. Also, make the perl
6143 scripts that use symlink() to test if it really exists and use "cp"
6144 if it doesn't. All this made OpenSSL compilable and installable in
6148 *) Fix for asn1_GetSequence() for indefinite length constructed data.
6149 If SEQUENCE is length is indefinite just set c->slen to the total
6150 amount of data available.
6151 [Steve Henson, reported by shige@FreeBSD.org]
6152 [This change does not apply to 0.9.7.]
6154 *) Change bctest to avoid here-documents inside command substitution
6155 (workaround for FreeBSD /bin/sh bug).
6156 For compatibility with Ultrix, avoid shell functions (introduced
6157 in the bctest version that searches along $PATH).
6160 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
6161 with des_encrypt() defined on some operating systems, like Solaris
6165 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
6166 On the Importance of Eliminating Errors in Cryptographic
6167 Computations, J. Cryptology 14 (2001) 2, 101-119,
6168 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
6171 *) MIPS assembler BIGNUM division bug fix.
6174 *) Disabled incorrect Alpha assembler code.
6177 *) Fix PKCS#7 decode routines so they correctly update the length
6178 after reading an EOC for the EXPLICIT tag.
6180 [This change does not apply to 0.9.7.]
6182 *) Fix bug in PKCS#12 key generation routines. This was triggered
6183 if a 3DES key was generated with a 0 initial byte. Include
6184 PKCS12_BROKEN_KEYGEN compilation option to retain the old
6185 (but broken) behaviour.
6188 *) Enhance bctest to search for a working bc along $PATH and print
6190 [Tim Rice <tim@multitalents.net> via Richard Levitte]
6192 *) Fix memory leaks in err.c: free err_data string if necessary;
6193 don't write to the wrong index in ERR_set_error_data.
6196 *) Implement ssl23_peek (analogous to ssl23_read), which previously
6200 *) Replace rdtsc with _emit statements for VC++ version 5.
6201 [Jeremy Cooper <jeremy@baymoo.org>]
6203 *) Make it possible to reuse SSLv2 sessions.
6206 *) In copy_email() check for >= 0 as a return value for
6207 X509_NAME_get_index_by_NID() since 0 is a valid index.
6208 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
6210 *) Avoid coredump with unsupported or invalid public keys by checking if
6211 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
6212 PKCS7_verify() fails with non detached data.
6215 *) Don't use getenv in library functions when run as setuid/setgid.
6216 New function OPENSSL_issetugid().
6219 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
6220 due to incorrect handling of multi-threading:
6222 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
6224 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
6226 3. Count how many times MemCheck_off() has been called so that
6227 nested use can be treated correctly. This also avoids
6228 inband-signalling in the previous code (which relied on the
6229 assumption that thread ID 0 is impossible).
6232 *) Add "-rand" option also to s_client and s_server.
6235 *) Fix CPU detection on Irix 6.x.
6236 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
6237 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6239 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
6242 [This change does not apply to 0.9.7.]
6244 *) Use the cached encoding of an X509_NAME structure rather than
6245 copying it. This is apparently the reason for the libsafe "errors"
6246 but the code is actually correct.
6249 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
6250 Bleichenbacher's DSA attack.
6251 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
6252 to be set and top=0 forces the highest bit to be set; top=-1 is new
6253 and leaves the highest bit random.
6254 [Ulf Moeller, Bodo Moeller]
6256 *) In the NCONF_...-based implementations for CONF_... queries
6257 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
6258 a temporary CONF structure with the data component set to NULL
6259 (which gives segmentation faults in lh_retrieve).
6260 Instead, use NULL for the CONF pointer in CONF_get_string and
6261 CONF_get_number (which may use environment variables) and directly
6262 return NULL from CONF_get_section.
6265 *) Fix potential buffer overrun for EBCDIC.
6268 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
6269 keyUsage if basicConstraints absent for a CA.
6272 *) Make SMIME_write_PKCS7() write mail header values with a format that
6273 is more generally accepted (no spaces before the semicolon), since
6274 some programs can't parse those values properly otherwise. Also make
6275 sure BIO's that break lines after each write do not create invalid
6279 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
6280 macros previously used would not encode an empty SEQUENCE OF
6281 and break the signature.
6283 [This change does not apply to 0.9.7.]
6285 *) Zero the premaster secret after deriving the master secret in
6289 *) Add some EVP_add_digest_alias registrations (as found in
6290 OpenSSL_add_all_digests()) to SSL_library_init()
6291 aka OpenSSL_add_ssl_algorithms(). This provides improved
6292 compatibility with peers using X.509 certificates
6293 with unconventional AlgorithmIdentifier OIDs.
6296 *) Fix for Irix with NO_ASM.
6297 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6299 *) ./config script fixes.
6300 [Ulf Moeller, Richard Levitte]
6302 *) Fix 'openssl passwd -1'.
6305 *) Change PKCS12_key_gen_asc() so it can cope with non null
6306 terminated strings whose length is passed in the passlen
6307 parameter, for example from PEM callbacks. This was done
6308 by adding an extra length parameter to asc2uni().
6309 [Steve Henson, reported by <oddissey@samsung.co.kr>]
6311 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
6312 call failed, free the DSA structure.
6315 *) Fix to uni2asc() to cope with zero length Unicode strings.
6316 These are present in some PKCS#12 files.
6319 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
6320 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
6321 when writing a 32767 byte record.
6322 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
6324 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
6325 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
6327 (RSA objects have a reference count access to which is protected
6328 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
6329 so they are meant to be shared between threads.)
6330 [Bodo Moeller, Geoff Thorpe; original patch submitted by
6331 "Reddie, Steven" <Steven.Reddie@ca.com>]
6333 *) Fix a deadlock in CRYPTO_mem_leaks().
6336 *) Use better test patterns in bntest.
6339 *) rand_win.c fix for Borland C.
6342 *) BN_rshift bugfix for n == 0.
6345 *) Add a 'bctest' script that checks for some known 'bc' bugs
6346 so that 'make test' does not abort just because 'bc' is broken.
6349 *) Store verify_result within SSL_SESSION also for client side to
6350 avoid potential security hole. (Re-used sessions on the client side
6351 always resulted in verify_result==X509_V_OK, not using the original
6352 result of the server certificate verification.)
6355 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
6356 SSL3_RT_APPLICATION_DATA, return 0.
6357 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
6361 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
6362 releases, have been re-implemented by renaming the previous
6363 implementations of ssl2_read and ssl3_read to ssl2_read_internal
6364 and ssl3_read_internal, respectively, and adding 'peek' parameters
6365 to them. The new ssl[23]_{read,peek} functions are calls to
6366 ssl[23]_read_internal with the 'peek' flag set appropriately.
6367 A 'peek' parameter has also been added to ssl3_read_bytes, which
6368 does the actual work for ssl3_read_internal.
6371 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
6372 the method-specific "init()" handler. Also clean up ex_data after
6373 calling the method-specific "finish()" handler. Previously, this was
6374 happening the other way round.
6377 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
6378 The previous value, 12, was not always sufficient for BN_mod_exp().
6381 *) Make sure that shared libraries get the internal name engine with
6382 the full version number and not just 0. This should mark the
6383 shared libraries as not backward compatible. Of course, this should
6384 be changed again when we can guarantee backward binary compatibility.
6387 *) Fix typo in get_cert_by_subject() in by_dir.c
6388 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
6390 *) Rework the system to generate shared libraries:
6392 - Make note of the expected extension for the shared libraries and
6393 if there is a need for symbolic links from for example libcrypto.so.0
6394 to libcrypto.so.0.9.7. There is extended info in Configure for
6397 - Make as few rebuilds of the shared libraries as possible.
6399 - Still avoid linking the OpenSSL programs with the shared libraries.
6401 - When installing, install the shared libraries separately from the
6405 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
6407 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
6408 and not in SSL_clear because the latter is also used by the
6409 accept/connect functions; previously, the settings made by
6410 SSL_set_read_ahead would be lost during the handshake.
6411 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
6413 *) Correct util/mkdef.pl to be selective about disabled algorithms.
6414 Previously, it would create entries for disableed algorithms no
6418 *) Added several new manual pages for SSL_* function.
6421 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
6423 *) In ssl23_get_client_hello, generate an error message when faced
6424 with an initial SSL 3.0/TLS record that is too small to contain the
6425 first two bytes of the ClientHello message, i.e. client_version.
6426 (Note that this is a pathologic case that probably has never happened
6427 in real life.) The previous approach was to use the version number
6428 from the record header as a substitute; but our protocol choice
6429 should not depend on that one because it is not authenticated
6430 by the Finished messages.
6433 *) More robust randomness gathering functions for Windows.
6434 [Jeffrey Altman <jaltman@columbia.edu>]
6436 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
6437 not set then we don't setup the error code for issuer check errors
6438 to avoid possibly overwriting other errors which the callback does
6439 handle. If an application does set the flag then we assume it knows
6440 what it is doing and can handle the new informational codes
6444 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
6445 a general "ANY" type, as such it should be able to decode anything
6446 including tagged types. However it didn't check the class so it would
6447 wrongly interpret tagged types in the same way as their universal
6448 counterpart and unknown types were just rejected. Changed so that the
6449 tagged and unknown types are handled in the same way as a SEQUENCE:
6450 that is the encoding is stored intact. There is also a new type
6451 "V_ASN1_OTHER" which is used when the class is not universal, in this
6452 case we have no idea what the actual type is so we just lump them all
6456 *) On VMS, stdout may very well lead to a file that is written to
6457 in a record-oriented fashion. That means that every write() will
6458 write a separate record, which will be read separately by the
6459 programs trying to read from it. This can be very confusing.
6461 The solution is to put a BIO filter in the way that will buffer
6462 text until a linefeed is reached, and then write everything a
6463 line at a time, so every record written will be an actual line,
6464 not chunks of lines and not (usually doesn't happen, but I've
6465 seen it once) several lines in one record. BIO_f_linebuffer() is
6468 Currently, it's a VMS-only method, because that's where it has
6469 been tested well enough.
6472 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
6473 it can return incorrect results.
6474 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
6475 but it was in 0.9.6-beta[12].)
6478 *) Disable the check for content being present when verifying detached
6479 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
6480 include zero length content when signing messages.
6483 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
6484 BIO_ctrl (for BIO pairs).
6487 *) Add DSO method for VMS.
6490 *) Bug fix: Montgomery multiplication could produce results with the
6494 *) Add RPM specification openssl.spec and modify it to build three
6495 packages. The default package contains applications, application
6496 documentation and run-time libraries. The devel package contains
6497 include files, static libraries and function documentation. The
6498 doc package contains the contents of the doc directory. The original
6499 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
6502 *) Add a large number of documentation files for many SSL routines.
6503 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
6505 *) Add a configuration entry for Sony News 4.
6506 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
6508 *) Don't set the two most significant bits to one when generating a
6509 random number < q in the DSA library.
6512 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
6513 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
6514 the underlying transport is blocking) if a handshake took place.
6515 (The default behaviour is needed by applications such as s_client
6516 and s_server that use select() to determine when to use SSL_read;
6517 but for applications that know in advance when to expect data, it
6518 just makes things more complicated.)
6521 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
6525 *) Add a few more EBCDIC conditionals that make `req' and `x509'
6526 work better on such systems.
6527 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6529 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
6530 Update PKCS12_parse() so it copies the friendlyName and the
6531 keyid to the certificates aux info.
6534 *) Fix bug in PKCS7_verify() which caused an infinite loop
6535 if there was more than one signature.
6536 [Sven Uszpelkat <su@celocom.de>]
6538 *) Major change in util/mkdef.pl to include extra information
6539 about each symbol, as well as presentig variables as well
6540 as functions. This change means that there's n more need
6541 to rebuild the .num files when some algorithms are excluded.
6544 *) Allow the verify time to be set by an application,
6545 rather than always using the current time.
6548 *) Phase 2 verify code reorganisation. The certificate
6549 verify code now looks up an issuer certificate by a
6550 number of criteria: subject name, authority key id
6551 and key usage. It also verifies self signed certificates
6552 by the same criteria. The main comparison function is
6553 X509_check_issued() which performs these checks.
6555 Lot of changes were necessary in order to support this
6556 without completely rewriting the lookup code.
6558 Authority and subject key identifier are now cached.
6560 The LHASH 'certs' is X509_STORE has now been replaced
6561 by a STACK_OF(X509_OBJECT). This is mainly because an
6562 LHASH can't store or retrieve multiple objects with
6563 the same hash value.
6565 As a result various functions (which were all internal
6566 use only) have changed to handle the new X509_STORE
6567 structure. This will break anything that messed round
6568 with X509_STORE internally.
6570 The functions X509_STORE_add_cert() now checks for an
6571 exact match, rather than just subject name.
6573 The X509_STORE API doesn't directly support the retrieval
6574 of multiple certificates matching a given criteria, however
6575 this can be worked round by performing a lookup first
6576 (which will fill the cache with candidate certificates)
6577 and then examining the cache for matches. This is probably
6578 the best we can do without throwing out X509_LOOKUP
6579 entirely (maybe later...).
6581 The X509_VERIFY_CTX structure has been enhanced considerably.
6583 All certificate lookup operations now go via a get_issuer()
6584 callback. Although this currently uses an X509_STORE it
6585 can be replaced by custom lookups. This is a simple way
6586 to bypass the X509_STORE hackery necessary to make this
6587 work and makes it possible to use more efficient techniques
6588 in future. A very simple version which uses a simple
6589 STACK for its trusted certificate store is also provided
6590 using X509_STORE_CTX_trusted_stack().
6592 The verify_cb() and verify() callbacks now have equivalents
6593 in the X509_STORE_CTX structure.
6595 X509_STORE_CTX also has a 'flags' field which can be used
6596 to customise the verify behaviour.
6599 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
6600 excludes S/MIME capabilities.
6603 *) When a certificate request is read in keep a copy of the
6604 original encoding of the signed data and use it when outputing
6605 again. Signatures then use the original encoding rather than
6606 a decoded, encoded version which may cause problems if the
6607 request is improperly encoded.
6610 *) For consistency with other BIO_puts implementations, call
6611 buffer_write(b, ...) directly in buffer_puts instead of calling
6614 In BIO_puts, increment b->num_write as in BIO_write.
6615 [Peter.Sylvester@EdelWeb.fr]
6617 *) Fix BN_mul_word for the case where the word is 0. (We have to use
6618 BN_zero, we may not return a BIGNUM with an array consisting of
6622 *) Avoid calling abort() from within the library when problems are
6623 detected, except if preprocessor symbols have been defined
6624 (such as REF_CHECK, BN_DEBUG etc.).
6627 *) New openssl application 'rsautl'. This utility can be
6628 used for low level RSA operations. DER public key
6629 BIO/fp routines also added.
6632 *) New Configure entry and patches for compiling on QNX 4.
6633 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
6635 *) A demo state-machine implementation was sponsored by
6636 Nuron (http://www.nuron.com/) and is now available in
6637 demos/state_machine.
6640 *) New options added to the 'dgst' utility for signature
6641 generation and verification.
6644 *) Unrecognized PKCS#7 content types are now handled via a
6645 catch all ASN1_TYPE structure. This allows unsupported
6646 types to be stored as a "blob" and an application can
6647 encode and decode it manually.
6650 *) Fix various signed/unsigned issues to make a_strex.c
6652 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
6654 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
6655 length if passed a buffer. ASN1_INTEGER_to_BN failed
6656 if passed a NULL BN and its argument was negative.
6657 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
6659 *) Modification to PKCS#7 encoding routines to output definite
6660 length encoding. Since currently the whole structures are in
6661 memory there's not real point in using indefinite length
6662 constructed encoding. However if OpenSSL is compiled with
6663 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
6666 *) Added BIO_vprintf() and BIO_vsnprintf().
6669 *) Added more prefixes to parse for in the the strings written
6670 through a logging bio, to cover all the levels that are available
6671 through syslog. The prefixes are now:
6673 PANIC, EMERG, EMR => LOG_EMERG
6674 ALERT, ALR => LOG_ALERT
6675 CRIT, CRI => LOG_CRIT
6676 ERROR, ERR => LOG_ERR
6677 WARNING, WARN, WAR => LOG_WARNING
6678 NOTICE, NOTE, NOT => LOG_NOTICE
6679 INFO, INF => LOG_INFO
6680 DEBUG, DBG => LOG_DEBUG
6682 and as before, if none of those prefixes are present at the
6683 beginning of the string, LOG_ERR is chosen.
6685 On Win32, the LOG_* levels are mapped according to this:
6687 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
6688 LOG_WARNING => EVENTLOG_WARNING_TYPE
6689 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
6693 *) Made it possible to reconfigure with just the configuration
6694 argument "reconf" or "reconfigure". The command line arguments
6695 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
6696 and are retrieved from there when reconfiguring.
6700 [Assar Westerlund <assar@sics.se>, Richard Levitte]
6702 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
6705 *) The obj_dat.pl script was messing up the sorting of object
6706 names. The reason was that it compared the quoted version
6707 of strings as a result "OCSP" > "OCSP Signing" because
6708 " > SPACE. Changed script to store unquoted versions of
6709 names and add quotes on output. It was also omitting some
6710 names from the lookup table if they were given a default
6711 value (that is if SN is missing it is given the same
6712 value as LN and vice versa), these are now added on the
6713 grounds that if an object has a name we should be able to
6714 look it up. Finally added warning output when duplicate
6715 short or long names are found.
6718 *) Changes needed for Tandem NSK.
6719 [Scott Uroff <scott@xypro.com>]
6721 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
6722 RSA_padding_check_SSLv23(), special padding was never detected
6723 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
6724 version rollback attacks was not effective.
6726 In s23_clnt.c, don't use special rollback-attack detection padding
6727 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
6728 client; similarly, in s23_srvr.c, don't do the rollback check if
6729 SSL 2.0 is the only protocol enabled in the server.
6732 *) Make it possible to get hexdumps of unprintable data with 'openssl
6733 asn1parse'. By implication, the functions ASN1_parse_dump() and
6734 BIO_dump_indent() are added.
6737 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
6738 these print out strings and name structures based on various
6739 flags including RFC2253 support and proper handling of
6740 multibyte characters. Added options to the 'x509' utility
6741 to allow the various flags to be set.
6744 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
6745 Also change the functions X509_cmp_current_time() and
6746 X509_gmtime_adj() work with an ASN1_TIME structure,
6747 this will enable certificates using GeneralizedTime in validity
6748 dates to be checked.
6751 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
6752 negative public key encodings) on by default,
6753 NO_NEG_PUBKEY_BUG can be set to disable it.
6756 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
6757 content octets. An i2c_ASN1_OBJECT is unnecessary because
6758 the encoding can be trivially obtained from the structure.
6761 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
6762 not read locks (CRYPTO_r_[un]lock).
6765 *) A first attempt at creating official support for shared
6766 libraries through configuration. I've kept it so the
6767 default is static libraries only, and the OpenSSL programs
6768 are always statically linked for now, but there are
6769 preparations for dynamic linking in place.
6770 This has been tested on Linux and Tru64.
6773 *) Randomness polling function for Win9x, as described in:
6774 Peter Gutmann, Software Generation of Practically Strong
6778 *) Fix so PRNG is seeded in req if using an already existing
6782 *) New options to smime application. -inform and -outform
6783 allow alternative formats for the S/MIME message including
6784 PEM and DER. The -content option allows the content to be
6785 specified separately. This should allow things like Netscape
6786 form signing output easier to verify.
6789 *) Fix the ASN1 encoding of tags using the 'long form'.
6792 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
6793 STRING types. These convert content octets to and from the
6794 underlying type. The actual tag and length octets are
6795 already assumed to have been read in and checked. These
6796 are needed because all other string types have virtually
6797 identical handling apart from the tag. By having versions
6798 of the ASN1 functions that just operate on content octets
6799 IMPLICIT tagging can be handled properly. It also allows
6800 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
6801 and ASN1_INTEGER are identical apart from the tag.
6804 *) Change the handling of OID objects as follows:
6806 - New object identifiers are inserted in objects.txt, following
6807 the syntax given in objects.README.
6808 - objects.pl is used to process obj_mac.num and create a new
6810 - obj_dat.pl is used to create a new obj_dat.h, using the data in
6813 This is currently kind of a hack, and the perl code in objects.pl
6814 isn't very elegant, but it works as I intended. The simplest way
6815 to check that it worked correctly is to look in obj_dat.h and
6816 check the array nid_objs and make sure the objects haven't moved
6817 around (this is important!). Additions are OK, as well as
6818 consistent name changes.
6821 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
6824 *) Addition of the command line parameter '-rand file' to 'openssl req'.
6825 The given file adds to whatever has already been seeded into the
6826 random pool through the RANDFILE configuration file option or
6827 environment variable, or the default random state file.
6830 *) mkstack.pl now sorts each macro group into lexical order.
6831 Previously the output order depended on the order the files
6832 appeared in the directory, resulting in needless rewriting
6836 *) Patches to make OpenSSL compile under Win32 again. Mostly
6837 work arounds for the VC++ problem that it treats func() as
6838 func(void). Also stripped out the parts of mkdef.pl that
6839 added extra typesafe functions: these no longer exist.
6842 *) Reorganisation of the stack code. The macros are now all
6843 collected in safestack.h . Each macro is defined in terms of
6844 a "stack macro" of the form SKM_<name>(type, a, b). The
6845 DEBUG_SAFESTACK is now handled in terms of function casts,
6846 this has the advantage of retaining type safety without the
6847 use of additional functions. If DEBUG_SAFESTACK is not defined
6848 then the non typesafe macros are used instead. Also modified the
6849 mkstack.pl script to handle the new form. Needs testing to see
6850 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
6851 the default if no major problems. Similar behaviour for ASN1_SET_OF
6852 and PKCS12_STACK_OF.
6855 *) When some versions of IIS use the 'NET' form of private key the
6856 key derivation algorithm is different. Normally MD5(password) is
6857 used as a 128 bit RC4 key. In the modified case
6858 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
6859 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
6860 as the old Netscape_RSA functions except they have an additional
6861 'sgckey' parameter which uses the modified algorithm. Also added
6862 an -sgckey command line option to the rsa utility. Thanks to
6863 Adrian Peck <bertie@ncipher.com> for posting details of the modified
6864 algorithm to openssl-dev.
6867 *) The evp_local.h macros were using 'c.##kname' which resulted in
6868 invalid expansion on some systems (SCO 5.0.5 for example).
6869 Corrected to 'c.kname'.
6870 [Phillip Porch <root@theporch.com>]
6872 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
6873 a STACK of email addresses from a certificate or request, these look
6874 in the subject name and the subject alternative name extensions and
6875 omit any duplicate addresses.
6878 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
6879 This makes DSA verification about 2 % faster.
6882 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
6883 (meaning that now 2^5 values will be precomputed, which is only 4 KB
6884 plus overhead for 1024 bit moduli).
6885 This makes exponentiations about 0.5 % faster for 1024 bit
6886 exponents (as measured by "openssl speed rsa2048").
6889 *) Rename memory handling macros to avoid conflicts with other
6891 Malloc => OPENSSL_malloc
6892 Malloc_locked => OPENSSL_malloc_locked
6893 Realloc => OPENSSL_realloc
6894 Free => OPENSSL_free
6897 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
6898 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
6901 *) CygWin32 support.
6902 [John Jarvie <jjarvie@newsguy.com>]
6904 *) The type-safe stack code has been rejigged. It is now only compiled
6905 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
6906 by default all type-specific stack functions are "#define"d back to
6907 standard stack functions. This results in more streamlined output
6908 but retains the type-safety checking possibilities of the original
6912 *) The STACK code has been cleaned up, and certain type declarations
6913 that didn't make a lot of sense have been brought in line. This has
6914 also involved a cleanup of sorts in safestack.h to more correctly
6915 map type-safe stack functions onto their plain stack counterparts.
6916 This work has also resulted in a variety of "const"ifications of
6917 lots of the code, especially "_cmp" operations which should normally
6918 be prototyped with "const" parameters anyway.
6921 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
6922 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
6923 (The PRNG state consists of two parts, the large pool 'state' and 'md',
6924 where all of 'md' is used each time the PRNG is used, but 'state'
6925 is used only indexed by a cyclic counter. As entropy may not be
6926 well distributed from the beginning, 'md' is important as a
6927 chaining variable. However, the output function chains only half
6928 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
6929 all of 'md', and seeding with STATE_SIZE dummy bytes will result
6930 in all of 'state' being rewritten, with the new values depending
6931 on virtually all of 'md'. This overcomes the 80 bit limitation.)
6934 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
6935 the handshake is continued after ssl_verify_cert_chain();
6936 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
6937 can lead to 'unexplainable' connection aborts later.
6938 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
6940 *) Major EVP API cipher revision.
6941 Add hooks for extra EVP features. This allows various cipher
6942 parameters to be set in the EVP interface. Support added for variable
6943 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
6944 setting of RC2 and RC5 parameters.
6946 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
6949 Remove lots of duplicated code from the EVP library. For example *every*
6950 cipher init() function handles the 'iv' in the same way according to the
6951 cipher mode. They also all do nothing if the 'key' parameter is NULL and
6952 for CFB and OFB modes they zero ctx->num.
6954 New functionality allows removal of S/MIME code RC2 hack.
6956 Most of the routines have the same form and so can be declared in terms
6959 By shifting this to the top level EVP_CipherInit() it can be removed from
6960 all individual ciphers. If the cipher wants to handle IVs or keys
6961 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
6964 Change lots of functions like EVP_EncryptUpdate() to now return a
6965 value: although software versions of the algorithms cannot fail
6966 any installed hardware versions can.
6969 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
6970 this option is set, tolerate broken clients that send the negotiated
6971 protocol version number instead of the requested protocol version
6975 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
6976 i.e. non-zero for export ciphersuites, zero otherwise.
6977 Previous versions had this flag inverted, inconsistent with
6978 rsa_tmp_cb (..._TMP_RSA_CB).
6979 [Bodo Moeller; problem reported by Amit Chopra]
6981 *) Add missing DSA library text string. Work around for some IIS
6982 key files with invalid SEQUENCE encoding.
6985 *) Add a document (doc/standards.txt) that list all kinds of standards
6986 and so on that are implemented in OpenSSL.
6989 *) Enhance c_rehash script. Old version would mishandle certificates
6990 with the same subject name hash and wouldn't handle CRLs at all.
6991 Added -fingerprint option to crl utility, to support new c_rehash
6995 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
6998 *) Fix for SSL server purpose checking. Server checking was
6999 rejecting certificates which had extended key usage present
7000 but no ssl client purpose.
7001 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
7003 *) Make PKCS#12 code work with no password. The PKCS#12 spec
7004 is a little unclear about how a blank password is handled.
7005 Since the password in encoded as a BMPString with terminating
7006 double NULL a zero length password would end up as just the
7007 double NULL. However no password at all is different and is
7008 handled differently in the PKCS#12 key generation code. NS
7009 treats a blank password as zero length. MSIE treats it as no
7010 password on export: but it will try both on import. We now do
7011 the same: PKCS12_parse() tries zero length and no password if
7012 the password is set to "" or NULL (NULL is now a valid password:
7013 it wasn't before) as does the pkcs12 application.
7016 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
7017 perror when PEM_read_bio_X509_REQ fails, the error message must
7018 be obtained from the error queue.
7021 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
7022 it in ERR_remove_state if appropriate, and change ERR_get_state
7023 accordingly to avoid race conditions (this is necessary because
7024 thread_hash is no longer constant once set).
7027 *) Bugfix for linux-elf makefile.one.
7030 *) RSA_get_default_method() will now cause a default
7031 RSA_METHOD to be chosen if one doesn't exist already.
7032 Previously this was only set during a call to RSA_new()
7033 or RSA_new_method(NULL) meaning it was possible for
7034 RSA_get_default_method() to return NULL.
7037 *) Added native name translation to the existing DSO code
7038 that will convert (if the flag to do so is set) filenames
7039 that are sufficiently small and have no path information
7040 into a canonical native form. Eg. "blah" converted to
7041 "libblah.so" or "blah.dll" etc.
7044 *) New function ERR_error_string_n(e, buf, len) which is like
7045 ERR_error_string(e, buf), but writes at most 'len' bytes
7046 including the 0 terminator. For ERR_error_string_n, 'buf'
7048 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
7050 *) CONF library reworked to become more general. A new CONF
7051 configuration file reader "class" is implemented as well as a
7052 new functions (NCONF_*, for "New CONF") to handle it. The now
7053 old CONF_* functions are still there, but are reimplemented to
7054 work in terms of the new functions. Also, a set of functions
7055 to handle the internal storage of the configuration data is
7056 provided to make it easier to write new configuration file
7057 reader "classes" (I can definitely see something reading a
7058 configuration file in XML format, for example), called _CONF_*,
7059 or "the configuration storage API"...
7061 The new configuration file reading functions are:
7063 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
7064 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
7066 NCONF_default, NCONF_WIN32
7068 NCONF_dump_fp, NCONF_dump_bio
7070 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
7071 NCONF_new creates a new CONF object. This works in the same way
7072 as other interfaces in OpenSSL, like the BIO interface.
7073 NCONF_dump_* dump the internal storage of the configuration file,
7074 which is useful for debugging. All other functions take the same
7075 arguments as the old CONF_* functions wth the exception of the
7076 first that must be a `CONF *' instead of a `LHASH *'.
7078 To make it easer to use the new classes with the old CONF_* functions,
7079 the function CONF_set_default_method is provided.
7082 *) Add '-tls1' option to 'openssl ciphers', which was already
7083 mentioned in the documentation but had not been implemented.
7084 (This option is not yet really useful because even the additional
7085 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
7088 *) Initial DSO code added into libcrypto for letting OpenSSL (and
7089 OpenSSL-based applications) load shared libraries and bind to
7090 them in a portable way.
7091 [Geoff Thorpe, with contributions from Richard Levitte]
7093 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
7095 *) Make sure _lrotl and _lrotr are only used with MSVC.
7097 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
7098 (the default implementation of RAND_status).
7100 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
7101 to '-clrext' (= clear extensions), as intended and documented.
7102 [Bodo Moeller; inconsistency pointed out by Michael Attili
7105 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
7106 was larger than the MD block size.
7107 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
7109 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
7110 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
7111 using the passed key: if the passed key was a private key the result
7112 of X509_print(), for example, would be to print out all the private key
7116 *) des_quad_cksum() byte order bug fix.
7117 [Ulf Möller, using the problem description in krb4-0.9.7, where
7118 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
7120 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
7122 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
7124 *) For easily testing in shell scripts whether some command
7125 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
7126 returns with exit code 0 iff no command of the given name is available.
7127 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
7128 the output goes to stdout and nothing is printed to stderr.
7129 Additional arguments are always ignored.
7131 Since for each cipher there is a command of the same name,
7132 the 'no-cipher' compilation switches can be tested this way.
7134 ('openssl no-XXX' is not able to detect pseudo-commands such
7135 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
7138 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
7141 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
7142 is set; it will be thrown away anyway because each handshake creates
7144 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
7145 to parameters -- in previous versions (since OpenSSL 0.9.3) the
7146 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
7147 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
7150 *) New s_client option -ign_eof: EOF at stdin is ignored, and
7151 'Q' and 'R' lose their special meanings (quit/renegotiate).
7152 This is part of what -quiet does; unlike -quiet, -ign_eof
7153 does not suppress any output.
7156 *) Add compatibility options to the purpose and trust code. The
7157 purpose X509_PURPOSE_ANY is "any purpose" which automatically
7158 accepts a certificate or CA, this was the previous behaviour,
7159 with all the associated security issues.
7161 X509_TRUST_COMPAT is the old trust behaviour: only and
7162 automatically trust self signed roots in certificate store. A
7163 new trust setting X509_TRUST_DEFAULT is used to specify that
7164 a purpose has no associated trust setting and it should instead
7165 use the value in the default purpose.
7168 *) Fix the PKCS#8 DSA private key code so it decodes keys again
7169 and fix a memory leak.
7172 *) In util/mkerr.pl (which implements 'make errors'), preserve
7173 reason strings from the previous version of the .c file, as
7174 the default to have only downcase letters (and digits) in
7175 automatically generated reasons codes is not always appropriate.
7178 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
7179 using strerror. Previously, ERR_reason_error_string() returned
7180 library names as reason strings for SYSerr; but SYSerr is a special
7181 case where small numbers are errno values, not library numbers.
7184 *) Add '-dsaparam' option to 'openssl dhparam' application. This
7185 converts DSA parameters into DH parameters. (When creating parameters,
7186 DSA_generate_parameters is used.)
7189 *) Include 'length' (recommended exponent length) in C code generated
7190 by 'openssl dhparam -C'.
7193 *) The second argument to set_label in perlasm was already being used
7194 so couldn't be used as a "file scope" flag. Moved to third argument
7198 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
7199 instead of RAND_bytes for encryption IVs and salts.
7202 *) Include RAND_status() into RAND_METHOD instead of implementing
7203 it only for md_rand.c Otherwise replacing the PRNG by calling
7204 RAND_set_rand_method would be impossible.
7207 *) Don't let DSA_generate_key() enter an infinite loop if the random
7208 number generation fails.
7211 *) New 'rand' application for creating pseudo-random output.
7214 *) Added configuration support for Linux/IA64
7215 [Rolf Haberrecker <rolf@suse.de>]
7217 *) Assembler module support for Mingw32.
7220 *) Shared library support for HPUX (in shlib/).
7221 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
7223 *) Shared library support for Solaris gcc.
7224 [Lutz Behnke <behnke@trustcenter.de>]
7226 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
7228 *) PKCS7_encrypt() was adding text MIME headers twice because they
7229 were added manually and by SMIME_crlf_copy().
7232 *) In bntest.c don't call BN_rand with zero bits argument.
7233 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
7235 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
7236 case was implemented. This caused BN_div_recp() to fail occasionally.
7239 *) Add an optional second argument to the set_label() in the perl
7240 assembly language builder. If this argument exists and is set
7241 to 1 it signals that the assembler should use a symbol whose
7242 scope is the entire file, not just the current function. This
7243 is needed with MASM which uses the format label:: for this scope.
7244 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
7246 *) Change the ASN1 types so they are typedefs by default. Before
7247 almost all types were #define'd to ASN1_STRING which was causing
7248 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
7252 *) Change names of new functions to the new get1/get0 naming
7253 convention: After 'get1', the caller owns a reference count
7254 and has to call ..._free; 'get0' returns a pointer to some
7255 data structure without incrementing reference counters.
7256 (Some of the existing 'get' functions increment a reference
7257 counter, some don't.)
7258 Similarly, 'set1' and 'add1' functions increase reference
7259 counters or duplicate objects.
7262 *) Allow for the possibility of temp RSA key generation failure:
7263 the code used to assume it always worked and crashed on failure.
7266 *) Fix potential buffer overrun problem in BIO_printf().
7267 [Ulf Möller, using public domain code by Patrick Powell; problem
7268 pointed out by David Sacerdote <das33@cornell.edu>]
7270 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
7271 RAND_egd() and RAND_status(). In the command line application,
7272 the EGD socket can be specified like a seed file using RANDFILE
7276 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
7277 Some CAs (e.g. Verisign) distribute certificates in this form.
7280 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
7281 list to exclude them. This means that no special compilation option
7282 is needed to use anonymous DH: it just needs to be included in the
7286 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
7287 EVP_MD_type. The old functionality is available in a new macro called
7288 EVP_MD_md(). Change code that uses it and update docs.
7291 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
7292 where the 'void *' argument is replaced by a function pointer argument.
7293 Previously 'void *' was abused to point to functions, which works on
7294 many platforms, but is not correct. As these functions are usually
7295 called by macros defined in OpenSSL header files, most source code
7296 should work without changes.
7299 *) <openssl/opensslconf.h> (which is created by Configure) now contains
7300 sections with information on -D... compiler switches used for
7301 compiling the library so that applications can see them. To enable
7302 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
7303 must be defined. E.g.,
7304 #define OPENSSL_ALGORITHM_DEFINES
7305 #include <openssl/opensslconf.h>
7306 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
7307 [Richard Levitte, Ulf and Bodo Möller]
7309 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
7313 *) Change the 'other' type in certificate aux info to a STACK_OF
7314 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
7315 the required ASN1 format: arbitrary types determined by an OID.
7318 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
7319 argument to 'req'. This is not because the function is newer or
7320 better than others it just uses the work 'NEW' in the certificate
7321 request header lines. Some software needs this.
7324 *) Reorganise password command line arguments: now passwords can be
7325 obtained from various sources. Delete the PEM_cb function and make
7326 it the default behaviour: i.e. if the callback is NULL and the
7327 usrdata argument is not NULL interpret it as a null terminated pass
7328 phrase. If usrdata and the callback are NULL then the pass phrase
7329 is prompted for as usual.
7332 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
7333 the support is automatically enabled. The resulting binaries will
7334 autodetect the card and use it if present.
7335 [Ben Laurie and Compaq Inc.]
7337 *) Work around for Netscape hang bug. This sends certificate request
7338 and server done in one record. Since this is perfectly legal in the
7339 SSL/TLS protocol it isn't a "bug" option and is on by default. See
7340 the bugs/SSLv3 entry for more info.
7343 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
7346 *) Add -rand argument to smime and pkcs12 applications and read/write
7350 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
7353 *) Add command line password options to the remaining applications.
7356 *) Bug fix for BN_div_recp() for numerators with an even number of
7360 *) More tests in bntest.c, and changed test_bn output.
7363 *) ./config recognizes MacOS X now.
7366 *) Bug fix for BN_div() when the first words of num and divsor are
7367 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
7370 *) Add support for various broken PKCS#8 formats, and command line
7371 options to produce them.
7374 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
7375 get temporary BIGNUMs from a BN_CTX.
7378 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
7382 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
7383 include a #define from the old name to the new. The original intent
7384 was that statically linked binaries could for example just call
7385 SSLeay_add_all_ciphers() to just add ciphers to the table and not
7386 link with digests. This never worked becayse SSLeay_add_all_digests()
7387 and SSLeay_add_all_ciphers() were in the same source file so calling
7388 one would link with the other. They are now in separate source files.
7391 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
7394 *) Use a less unusual form of the Miller-Rabin primality test (it used
7395 a binary algorithm for exponentiation integrated into the Miller-Rabin
7396 loop, our standard modexp algorithms are faster).
7399 *) Support for the EBCDIC character set completed.
7400 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
7402 *) Source code cleanups: use const where appropriate, eliminate casts,
7403 use void * instead of char * in lhash.
7406 *) Bugfix: ssl3_send_server_key_exchange was not restartable
7407 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
7408 this the server could overwrite ephemeral keys that the client
7412 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
7413 using 50 iterations of the Rabin-Miller test.
7415 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
7416 iterations of the Rabin-Miller test as required by the appendix
7417 to FIPS PUB 186[-1]) instead of DSA_is_prime.
7418 As BN_is_prime_fasttest includes trial division, DSA parameter
7419 generation becomes much faster.
7421 This implies a change for the callback functions in DSA_is_prime
7422 and DSA_generate_parameters: The callback function is called once
7423 for each positive witness in the Rabin-Miller test, not just
7424 occasionally in the inner loop; and the parameters to the
7425 callback function now provide an iteration count for the outer
7426 loop rather than for the current invocation of the inner loop.
7427 DSA_generate_parameters additionally can call the callback
7428 function with an 'iteration count' of -1, meaning that a
7429 candidate has passed the trial division test (when q is generated
7430 from an application-provided seed, trial division is skipped).
7433 *) New function BN_is_prime_fasttest that optionally does trial
7434 division before starting the Rabin-Miller test and has
7435 an additional BN_CTX * argument (whereas BN_is_prime always
7436 has to allocate at least one BN_CTX).
7437 'callback(1, -1, cb_arg)' is called when a number has passed the
7438 trial division stage.
7441 *) Fix for bug in CRL encoding. The validity dates weren't being handled
7445 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
7448 *) New function BN_pseudo_rand().
7451 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
7452 bignum version of BN_from_montgomery() with the working code from
7453 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
7457 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
7458 made it impossible to use the same SSL_SESSION data structure in
7459 SSL2 clients in multiple threads.
7462 *) The return value of RAND_load_file() no longer counts bytes obtained
7463 by stat(). RAND_load_file(..., -1) is new and uses the complete file
7464 to seed the PRNG (previously an explicit byte count was required).
7465 [Ulf Möller, Bodo Möller]
7467 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
7468 used (char *) instead of (void *) and had casts all over the place.
7471 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
7474 *) Retain source code compatibility for BN_prime_checks macro:
7475 BN_is_prime(..., BN_prime_checks, ...) now uses
7476 BN_prime_checks_for_size to determine the appropriate number of
7477 Rabin-Miller iterations.
7480 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
7481 DH_CHECK_P_NOT_SAFE_PRIME.
7482 (Check if this is true? OpenPGP calls them "strong".)
7485 *) Merge the functionality of "dh" and "gendh" programs into a new program
7486 "dhparam". The old programs are retained for now but will handle DH keys
7487 (instead of parameters) in future.
7490 *) Make the ciphers, s_server and s_client programs check the return values
7491 when a new cipher list is set.
7494 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
7495 ciphers. Before when the 56bit ciphers were enabled the sorting was
7498 The syntax for the cipher sorting has been extended to support sorting by
7499 cipher-strength (using the strength_bits hard coded in the tables).
7500 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
7502 Fix a bug in the cipher-command parser: when supplying a cipher command
7503 string with an "undefined" symbol (neither command nor alphanumeric
7504 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
7505 an error is flagged.
7507 Due to the strength-sorting extension, the code of the
7508 ssl_create_cipher_list() function was completely rearranged. I hope that
7509 the readability was also increased :-)
7510 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
7512 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
7513 for the first serial number and places 2 in the serial number file. This
7514 avoids problems when the root CA is created with serial number zero and
7515 the first user certificate has the same issuer name and serial number
7519 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
7520 the new code. Add documentation for this stuff.
7523 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
7524 X509_*() to X509at_*() on the grounds that they don't handle X509
7525 structures and behave in an analagous way to the X509v3 functions:
7526 they shouldn't be called directly but wrapper functions should be used
7529 So we also now have some wrapper functions that call the X509at functions
7530 when passed certificate requests. (TO DO: similar things can be done with
7531 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
7532 things. Some of these need some d2i or i2d and print functionality
7533 because they handle more complex structures.)
7536 *) Add missing #ifndefs that caused missing symbols when building libssl
7537 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
7538 NO_RSA in ssl/s2*.c.
7539 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
7541 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
7542 has a return value which indicates the quality of the random data
7543 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
7544 error queue. New function RAND_pseudo_bytes() generates output that is
7545 guaranteed to be unique but not unpredictable. RAND_add is like
7546 RAND_seed, but takes an extra argument for an entropy estimate
7547 (RAND_seed always assumes full entropy).
7550 *) Do more iterations of Rabin-Miller probable prime test (specifically,
7551 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
7552 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
7553 in crypto/bn/bn_prime.c for the complete table). This guarantees a
7554 false-positive rate of at most 2^-80 for random input.
7557 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
7560 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
7561 in the 0.9.5 release), this returns the chain
7562 from an X509_CTX structure with a dup of the stack and all
7563 the X509 reference counts upped: so the stack will exist
7564 after X509_CTX_cleanup() has been called. Modify pkcs12.c
7567 Also make SSL_SESSION_print() print out the verify return
7571 *) Add manpage for the pkcs12 command. Also change the default
7572 behaviour so MAC iteration counts are used unless the new
7573 -nomaciter option is used. This improves file security and
7574 only older versions of MSIE (4.0 for example) need it.
7577 *) Honor the no-xxx Configure options when creating .DEF files.
7580 *) Add PKCS#10 attributes to field table: challengePassword,
7581 unstructuredName and unstructuredAddress. These are taken from
7582 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
7583 international characters are used.
7585 More changes to X509_ATTRIBUTE code: allow the setting of types
7586 based on strings. Remove the 'loc' parameter when adding
7587 attributes because these will be a SET OF encoding which is sorted
7591 *) Initial changes to the 'req' utility to allow request generation
7592 automation. This will allow an application to just generate a template
7593 file containing all the field values and have req construct the
7596 Initial support for X509_ATTRIBUTE handling. Stacks of these are
7597 used all over the place including certificate requests and PKCS#7
7598 structures. They are currently handled manually where necessary with
7599 some primitive wrappers for PKCS#7. The new functions behave in a
7600 manner analogous to the X509 extension functions: they allow
7601 attributes to be looked up by NID and added.
7603 Later something similar to the X509V3 code would be desirable to
7604 automatically handle the encoding, decoding and printing of the
7605 more complex types. The string types like challengePassword can
7606 be handled by the string table functions.
7608 Also modified the multi byte string table handling. Now there is
7609 a 'global mask' which masks out certain types. The table itself
7610 can use the flag STABLE_NO_MASK to ignore the mask setting: this
7611 is useful when for example there is only one permissible type
7612 (as in countryName) and using the mask might result in no valid
7616 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
7617 SSL_get_peer_finished to allow applications to obtain the latest
7618 Finished messages sent to the peer or expected from the peer,
7619 respectively. (SSL_get_peer_finished is usually the Finished message
7620 actually received from the peer, otherwise the protocol will be aborted.)
7622 As the Finished message are message digests of the complete handshake
7623 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
7624 be used for external authentication procedures when the authentication
7625 provided by SSL/TLS is not desired or is not enough.
7628 *) Enhanced support for Alpha Linux is added. Now ./config checks if
7629 the host supports BWX extension and if Compaq C is present on the
7630 $PATH. Just exploiting of the BWX extension results in 20-30%
7631 performance kick for some algorithms, e.g. DES and RC4 to mention
7632 a couple. Compaq C in turn generates ~20% faster code for MD5 and
7636 *) Add support for MS "fast SGC". This is arguably a violation of the
7637 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
7638 weak crypto and after checking the certificate is SGC a second one
7639 with strong crypto. MS SGC stops the first handshake after receiving
7640 the server certificate message and sends a second client hello. Since
7641 a server will typically do all the time consuming operations before
7642 expecting any further messages from the client (server key exchange
7643 is the most expensive) there is little difference between the two.
7645 To get OpenSSL to support MS SGC we have to permit a second client
7646 hello message after we have sent server done. In addition we have to
7647 reset the MAC if we do get this second client hello.
7650 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
7651 if a DER encoded private key is RSA or DSA traditional format. Changed
7652 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
7653 format DER encoded private key. Newer code should use PKCS#8 format which
7654 has the key type encoded in the ASN1 structure. Added DER private key
7655 support to pkcs8 application.
7658 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
7659 ciphersuites has been selected (as required by the SSL 3/TLS 1
7660 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
7661 is set, we interpret this as a request to violate the specification
7662 (the worst that can happen is a handshake failure, and 'correct'
7663 behaviour would result in a handshake failure anyway).
7666 *) In SSL_CTX_add_session, take into account that there might be multiple
7667 SSL_SESSION structures with the same session ID (e.g. when two threads
7668 concurrently obtain them from an external cache).
7669 The internal cache can handle only one SSL_SESSION with a given ID,
7670 so if there's a conflict, we now throw out the old one to achieve
7674 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
7675 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
7676 some routines that use cipher OIDs: some ciphers do not have OIDs
7677 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
7681 *) Simplify the trust setting structure and code. Now we just have
7682 two sequences of OIDs for trusted and rejected settings. These will
7683 typically have values the same as the extended key usage extension
7684 and any application specific purposes.
7686 The trust checking code now has a default behaviour: it will just
7687 check for an object with the same NID as the passed id. Functions can
7688 be provided to override either the default behaviour or the behaviour
7689 for a given id. SSL client, server and email already have functions
7690 in place for compatibility: they check the NID and also return "trusted"
7691 if the certificate is self signed.
7694 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
7695 traditional format into an EVP_PKEY structure.
7698 *) Add a password callback function PEM_cb() which either prompts for
7699 a password if usr_data is NULL or otherwise assumes it is a null
7700 terminated password. Allow passwords to be passed on command line
7701 environment or config files in a few more utilities.
7704 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
7705 keys. Add some short names for PKCS#8 PBE algorithms and allow them
7706 to be specified on the command line for the pkcs8 and pkcs12 utilities.
7707 Update documentation.
7710 *) Support for ASN1 "NULL" type. This could be handled before by using
7711 ASN1_TYPE but there wasn't any function that would try to read a NULL
7712 and produce an error if it couldn't. For compatibility we also have
7713 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
7714 don't allocate anything because they don't need to.
7717 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
7719 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
7721 *) Rebuild of the memory allocation routines used by OpenSSL code and
7722 possibly others as well. The purpose is to make an interface that
7723 provide hooks so anyone can build a separate set of allocation and
7724 deallocation routines to be used by OpenSSL, for example memory
7725 pool implementations, or something else, which was previously hard
7726 since Malloc(), Realloc() and Free() were defined as macros having
7727 the values malloc, realloc and free, respectively (except for Win32
7728 compilations). The same is provided for memory debugging code.
7729 OpenSSL already comes with functionality to find memory leaks, but
7730 this gives people a chance to debug other memory problems.
7732 With these changes, a new set of functions and macros have appeared:
7734 CRYPTO_set_mem_debug_functions() [F]
7735 CRYPTO_get_mem_debug_functions() [F]
7736 CRYPTO_dbg_set_options() [F]
7737 CRYPTO_dbg_get_options() [F]
7738 CRYPTO_malloc_debug_init() [M]
7740 The memory debug functions are NULL by default, unless the library
7741 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
7742 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
7743 gives the standard debugging functions that come with OpenSSL) or
7744 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
7745 provided by the library user) must be used. When the standard
7746 debugging functions are used, CRYPTO_dbg_set_options can be used to
7747 request additional information:
7748 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
7749 the CRYPTO_MDEBUG_xxx macro when compiling the library.
7751 Also, things like CRYPTO_set_mem_functions will always give the
7752 expected result (the new set of functions is used for allocation
7753 and deallocation) at all times, regardless of platform and compiler
7756 To finish it up, some functions that were never use in any other
7757 way than through macros have a new API and new semantic:
7760 CRYPTO_dbg_realloc()
7763 All macros of value have retained their old syntax.
7764 [Richard Levitte and Bodo Moeller]
7766 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
7767 ordering of SMIMECapabilities wasn't in "strength order" and there
7768 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
7772 *) Some ASN1 types with illegal zero length encoding (INTEGER,
7773 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
7774 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
7776 *) Merge in my S/MIME library for OpenSSL. This provides a simple
7777 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
7778 functionality to handle multipart/signed properly) and a utility
7779 called 'smime' to call all this stuff. This is based on code I
7780 originally wrote for Celo who have kindly allowed it to be
7781 included in OpenSSL.
7784 *) Add variants des_set_key_checked and des_set_key_unchecked of
7785 des_set_key (aka des_key_sched). Global variable des_check_key
7786 decides which of these is called by des_set_key; this way
7787 des_check_key behaves as it always did, but applications and
7788 the library itself, which was buggy for des_check_key == 1,
7789 have a cleaner way to pick the version they need.
7792 *) New function PKCS12_newpass() which changes the password of a
7796 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
7797 dynamic mix. In both cases the ids can be used as an index into the
7798 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
7799 functions so they accept a list of the field values and the
7800 application doesn't need to directly manipulate the X509_TRUST
7804 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
7808 *) Modify the way the V3 extension code looks up extensions. This now
7809 works in a similar way to the object code: we have some "standard"
7810 extensions in a static table which is searched with OBJ_bsearch()
7811 and the application can add dynamic ones if needed. The file
7812 crypto/x509v3/ext_dat.h now has the info: this file needs to be
7813 updated whenever a new extension is added to the core code and kept
7814 in ext_nid order. There is a simple program 'tabtest.c' which checks
7815 this. New extensions are not added too often so this file can readily
7816 be maintained manually.
7818 There are two big advantages in doing things this way. The extensions
7819 can be looked up immediately and no longer need to be "added" using
7820 X509V3_add_standard_extensions(): this function now does nothing.
7821 [Side note: I get *lots* of email saying the extension code doesn't
7822 work because people forget to call this function]
7823 Also no dynamic allocation is done unless new extensions are added:
7824 so if we don't add custom extensions there is no need to call
7825 X509V3_EXT_cleanup().
7828 *) Modify enc utility's salting as follows: make salting the default. Add a
7829 magic header, so unsalted files fail gracefully instead of just decrypting
7830 to garbage. This is because not salting is a big security hole, so people
7831 should be discouraged from doing it.
7834 *) Fixes and enhancements to the 'x509' utility. It allowed a message
7835 digest to be passed on the command line but it only used this
7836 parameter when signing a certificate. Modified so all relevant
7837 operations are affected by the digest parameter including the
7838 -fingerprint and -x509toreq options. Also -x509toreq choked if a
7839 DSA key was used because it didn't fix the digest.
7842 *) Initial certificate chain verify code. Currently tests the untrusted
7843 certificates for consistency with the verify purpose (which is set
7844 when the X509_STORE_CTX structure is set up) and checks the pathlength.
7846 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
7847 this is because it will reject chains with invalid extensions whereas
7848 every previous version of OpenSSL and SSLeay made no checks at all.
7850 Trust code: checks the root CA for the relevant trust settings. Trust
7851 settings have an initial value consistent with the verify purpose: e.g.
7852 if the verify purpose is for SSL client use it expects the CA to be
7853 trusted for SSL client use. However the default value can be changed to
7854 permit custom trust settings: one example of this would be to only trust
7855 certificates from a specific "secure" set of CAs.
7857 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
7858 which should be used for version portability: especially since the
7859 verify structure is likely to change more often now.
7861 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
7862 to set them. If not set then assume SSL clients will verify SSL servers
7865 Two new options to the verify program: -untrusted allows a set of
7866 untrusted certificates to be passed in and -purpose which sets the
7867 intended purpose of the certificate. If a purpose is set then the
7868 new chain verify code is used to check extension consistency.
7871 *) Support for the authority information access extension.
7874 *) Modify RSA and DSA PEM read routines to transparently handle
7875 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
7876 public keys in a format compatible with certificate
7877 SubjectPublicKeyInfo structures. Unfortunately there were already
7878 functions called *_PublicKey_* which used various odd formats so
7879 these are retained for compatibility: however the DSA variants were
7880 never in a public release so they have been deleted. Changed dsa/rsa
7881 utilities to handle the new format: note no releases ever handled public
7882 keys so we should be OK.
7884 The primary motivation for this change is to avoid the same fiasco
7885 that dogs private keys: there are several incompatible private key
7886 formats some of which are standard and some OpenSSL specific and
7887 require various evil hacks to allow partial transparent handling and
7888 even then it doesn't work with DER formats. Given the option anything
7889 other than PKCS#8 should be dumped: but the other formats have to
7890 stay in the name of compatibility.
7892 With public keys and the benefit of hindsight one standard format
7893 is used which works with EVP_PKEY, RSA or DSA structures: though
7894 it clearly returns an error if you try to read the wrong kind of key.
7896 Added a -pubkey option to the 'x509' utility to output the public key.
7897 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
7898 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
7899 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
7900 that do the same as the EVP_PKEY_assign_*() except they up the
7901 reference count of the added key (they don't "swallow" the
7905 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
7906 CRLs would fail if the file contained no certificates or no CRLs:
7907 added a new function to read in both types and return the number
7908 read: this means that if none are read it will be an error. The
7909 DER versions of the certificate and CRL reader would always fail
7910 because it isn't possible to mix certificates and CRLs in DER format
7911 without choking one or the other routine. Changed this to just read
7912 a certificate: this is the best we can do. Also modified the code
7913 in apps/verify.c to take notice of return codes: it was previously
7914 attempting to read in certificates from NULL pointers and ignoring
7915 any errors: this is one reason why the cert and CRL reader seemed
7916 to work. It doesn't check return codes from the default certificate
7917 routines: these may well fail if the certificates aren't installed.
7920 *) Code to support otherName option in GeneralName.
7923 *) First update to verify code. Change the verify utility
7924 so it warns if it is passed a self signed certificate:
7925 for consistency with the normal behaviour. X509_verify
7926 has been modified to it will now verify a self signed
7927 certificate if *exactly* the same certificate appears
7928 in the store: it was previously impossible to trust a
7929 single self signed certificate. This means that:
7930 openssl verify ss.pem
7931 now gives a warning about a self signed certificate but
7932 openssl verify -CAfile ss.pem ss.pem
7936 *) For servers, store verify_result in SSL_SESSION data structure
7937 (and add it to external session representation).
7938 This is needed when client certificate verifications fails,
7939 but an application-provided verification callback (set by
7940 SSL_CTX_set_cert_verify_callback) allows accepting the session
7941 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
7942 but returns 1): When the session is reused, we have to set
7943 ssl->verify_result to the appropriate error code to avoid
7945 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
7947 *) Fix a bug in the new PKCS#7 code: it didn't consider the
7948 case in PKCS7_dataInit() where the signed PKCS7 structure
7949 didn't contain any existing data because it was being created.
7950 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
7952 *) Add a salt to the key derivation routines in enc.c. This
7953 forms the first 8 bytes of the encrypted file. Also add a
7954 -S option to allow a salt to be input on the command line.
7957 *) New function X509_cmp(). Oddly enough there wasn't a function
7958 to compare two certificates. We do this by working out the SHA1
7959 hash and comparing that. X509_cmp() will be needed by the trust
7963 *) SSL_get1_session() is like SSL_get_session(), but increments
7964 the reference count in the SSL_SESSION returned.
7965 [Geoff Thorpe <geoff@eu.c2.net>]
7967 *) Fix for 'req': it was adding a null to request attributes.
7968 Also change the X509_LOOKUP and X509_INFO code to handle
7969 certificate auxiliary information.
7972 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
7976 *) Add the possibility to add extra information to the memory leak
7977 detecting output, to form tracebacks, showing from where each
7978 allocation was originated: CRYPTO_push_info("constant string") adds
7979 the string plus current file name and line number to a per-thread
7980 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
7981 is like calling CYRPTO_pop_info() until the stack is empty.
7982 Also updated memory leak detection code to be multi-thread-safe.
7985 *) Add options -text and -noout to pkcs7 utility and delete the
7986 encryption options which never did anything. Update docs.
7989 *) Add options to some of the utilities to allow the pass phrase
7990 to be included on either the command line (not recommended on
7991 OSes like Unix) or read from the environment. Update the
7992 manpages and fix a few bugs.
7995 *) Add a few manpages for some of the openssl commands.
7998 *) Fix the -revoke option in ca. It was freeing up memory twice,
7999 leaking and not finding already revoked certificates.
8002 *) Extensive changes to support certificate auxiliary information.
8003 This involves the use of X509_CERT_AUX structure and X509_AUX
8004 functions. An X509_AUX function such as PEM_read_X509_AUX()
8005 can still read in a certificate file in the usual way but it
8006 will also read in any additional "auxiliary information". By
8007 doing things this way a fair degree of compatibility can be
8008 retained: existing certificates can have this information added
8009 using the new 'x509' options.
8011 Current auxiliary information includes an "alias" and some trust
8012 settings. The trust settings will ultimately be used in enhanced
8013 certificate chain verification routines: currently a certificate
8014 can only be trusted if it is self signed and then it is trusted
8018 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
8019 The problem was that one of the replacement routines had not been working
8020 since SSLeay releases. For now the offending routine has been replaced
8021 with non-optimised assembler. Even so, this now gives around 95%
8022 performance improvement for 1024 bit RSA signs.
8025 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
8026 handling. Most clients have the effective key size in bits equal to
8027 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
8028 A few however don't do this and instead use the size of the decrypted key
8029 to determine the RC2 key length and the AlgorithmIdentifier to determine
8030 the effective key length. In this case the effective key length can still
8031 be 40 bits but the key length can be 168 bits for example. This is fixed
8032 by manually forcing an RC2 key into the EVP_PKEY structure because the
8033 EVP code can't currently handle unusual RC2 key sizes: it always assumes
8034 the key length and effective key length are equal.
8037 *) Add a bunch of functions that should simplify the creation of
8038 X509_NAME structures. Now you should be able to do:
8039 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
8040 and have it automatically work out the correct field type and fill in
8041 the structures. The more adventurous can try:
8042 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
8043 and it will (hopefully) work out the correct multibyte encoding.
8046 *) Change the 'req' utility to use the new field handling and multibyte
8047 copy routines. Before the DN field creation was handled in an ad hoc
8048 way in req, ca, and x509 which was rather broken and didn't support
8049 BMPStrings or UTF8Strings. Since some software doesn't implement
8050 BMPStrings or UTF8Strings yet, they can be enabled using the config file
8051 using the dirstring_type option. See the new comment in the default
8052 openssl.cnf for more info.
8055 *) Make crypto/rand/md_rand.c more robust:
8056 - Assure unique random numbers after fork().
8057 - Make sure that concurrent threads access the global counter and
8058 md serializably so that we never lose entropy in them
8059 or use exactly the same state in multiple threads.
8060 Access to the large state is not always serializable because
8061 the additional locking could be a performance killer, and
8062 md should be large enough anyway.
8065 *) New file apps/app_rand.c with commonly needed functionality
8066 for handling the random seed file.
8068 Use the random seed file in some applications that previously did not:
8070 dsaparam -genkey (which also ignored its '-rand' option),
8073 x509 (when signing).
8074 Except on systems with /dev/urandom, it is crucial to have a random
8075 seed file at least for key creation, DSA signing, and for DH exchanges;
8076 for RSA signatures we could do without one.
8078 gendh and gendsa (unlike genrsa) used to read only the first byte
8079 of each file listed in the '-rand' option. The function as previously
8080 found in genrsa is now in app_rand.c and is used by all programs
8081 that support '-rand'.
8084 *) In RAND_write_file, use mode 0600 for creating files;
8085 don't just chmod when it may be too late.
8088 *) Report an error from X509_STORE_load_locations
8089 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
8092 *) New function ASN1_mbstring_copy() this copies a string in either
8093 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
8094 into an ASN1_STRING type. A mask of permissible types is passed
8095 and it chooses the "minimal" type to use or an error if not type
8099 *) Add function equivalents to the various macros in asn1.h. The old
8100 macros are retained with an M_ prefix. Code inside the library can
8101 use the M_ macros. External code (including the openssl utility)
8102 should *NOT* in order to be "shared library friendly".
8105 *) Add various functions that can check a certificate's extensions
8106 to see if it usable for various purposes such as SSL client,
8107 server or S/MIME and CAs of these types. This is currently
8108 VERY EXPERIMENTAL but will ultimately be used for certificate chain
8109 verification. Also added a -purpose flag to x509 utility to
8110 print out all the purposes.
8113 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
8117 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
8118 for, obtain and decode and extension and obtain its critical flag.
8119 This allows all the necessary extension code to be handled in a
8120 single function call.
8123 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
8124 platforms. See crypto/rc4/rc4_enc.c for further details.
8127 *) New -noout option to asn1parse. This causes no output to be produced
8128 its main use is when combined with -strparse and -out to extract data
8129 from a file (which may not be in ASN.1 format).
8132 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
8133 when producing the local key id.
8134 [Richard Levitte <levitte@stacken.kth.se>]
8136 *) New option -dhparam in s_server. This allows a DH parameter file to be
8137 stated explicitly. If it is not stated then it tries the first server
8138 certificate file. The previous behaviour hard coded the filename
8142 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
8143 a public key to be input or output. For example:
8144 openssl rsa -in key.pem -pubout -out pubkey.pem
8145 Also added necessary DSA public key functions to handle this.
8148 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
8149 in the message. This was handled by allowing
8150 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
8151 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
8153 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
8154 to the end of the strings whereas this didn't. This would cause problems
8155 if strings read with d2i_ASN1_bytes() were later modified.
8156 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
8158 *) Fix for base64 decode bug. When a base64 bio reads only one line of
8159 data and it contains EOF it will end up returning an error. This is
8160 caused by input 46 bytes long. The cause is due to the way base64
8161 BIOs find the start of base64 encoded data. They do this by trying a
8162 trial decode on each line until they find one that works. When they
8163 do a flag is set and it starts again knowing it can pass all the
8164 data directly through the decoder. Unfortunately it doesn't reset
8165 the context it uses. This means that if EOF is reached an attempt
8166 is made to pass two EOFs through the context and this causes the
8167 resulting error. This can also cause other problems as well. As is
8168 usual with these problems it takes *ages* to find and the fix is
8169 trivial: move one line.
8170 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
8172 *) Ugly workaround to get s_client and s_server working under Windows. The
8173 old code wouldn't work because it needed to select() on sockets and the
8174 tty (for keypresses and to see if data could be written). Win32 only
8175 supports select() on sockets so we select() with a 1s timeout on the
8176 sockets and then see if any characters are waiting to be read, if none
8177 are present then we retry, we also assume we can always write data to
8178 the tty. This isn't nice because the code then blocks until we've
8179 received a complete line of data and it is effectively polling the
8180 keyboard at 1s intervals: however it's quite a bit better than not
8181 working at all :-) A dedicated Windows application might handle this
8182 with an event loop for example.
8185 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
8186 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
8187 will be called when RSA_sign() and RSA_verify() are used. This is useful
8188 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
8189 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
8190 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
8191 This necessitated the support of an extra signature type NID_md5_sha1
8192 for SSL signatures and modifications to the SSL library to use it instead
8193 of calling RSA_public_decrypt() and RSA_private_encrypt().
8196 *) Add new -verify -CAfile and -CApath options to the crl program, these
8197 will lookup a CRL issuers certificate and verify the signature in a
8198 similar way to the verify program. Tidy up the crl program so it
8199 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
8200 less strict. It will now permit CRL extensions even if it is not
8201 a V2 CRL: this will allow it to tolerate some broken CRLs.
8204 *) Initialize all non-automatic variables each time one of the openssl
8205 sub-programs is started (this is necessary as they may be started
8206 multiple times from the "OpenSSL>" prompt).
8207 [Lennart Bang, Bodo Moeller]
8209 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
8210 removing all other RSA functionality (this is what NO_RSA does). This
8211 is so (for example) those in the US can disable those operations covered
8212 by the RSA patent while allowing storage and parsing of RSA keys and RSA
8216 *) Non-copying interface to BIO pairs.
8217 (still largely untested)
8220 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
8221 ASCII string. This was handled independently in various places before.
8224 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
8225 UTF8 strings a character at a time.
8228 *) Use client_version from client hello to select the protocol
8229 (s23_srvr.c) and for RSA client key exchange verification
8230 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
8233 *) Add various utility functions to handle SPKACs, these were previously
8234 handled by poking round in the structure internals. Added new function
8235 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
8236 print, verify and generate SPKACs. Based on an original idea from
8237 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
8240 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
8243 *) Allow the config file extension section to be overwritten on the
8244 command line. Based on an original idea from Massimiliano Pala
8245 <madwolf@comune.modena.it>. The new option is called -extensions
8246 and can be applied to ca, req and x509. Also -reqexts to override
8247 the request extensions in req and -crlexts to override the crl extensions
8251 *) Add new feature to the SPKAC handling in ca. Now you can include
8252 the same field multiple times by preceding it by "XXXX." for example:
8255 this is the same syntax as used in the req config file.
8258 *) Allow certificate extensions to be added to certificate requests. These
8259 are specified in a 'req_extensions' option of the req section of the
8260 config file. They can be printed out with the -text option to req but
8261 are otherwise ignored at present.
8264 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
8265 data read consists of only the final block it would not decrypted because
8266 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
8267 A misplaced 'break' also meant the decrypted final block might not be
8268 copied until the next read.
8271 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
8272 a few extra parameters to the DH structure: these will be useful if
8273 for example we want the value of 'q' or implement X9.42 DH.
8276 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
8277 provides hooks that allow the default DSA functions or functions on a
8278 "per key" basis to be replaced. This allows hardware acceleration and
8279 hardware key storage to be handled without major modification to the
8280 library. Also added low level modexp hooks and CRYPTO_EX structure and
8281 associated functions.
8284 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
8285 as "read only": it can't be written to and the buffer it points to will
8286 not be freed. Reading from a read only BIO is much more efficient than
8287 a normal memory BIO. This was added because there are several times when
8288 an area of memory needs to be read from a BIO. The previous method was
8289 to create a memory BIO and write the data to it, this results in two
8290 copies of the data and an O(n^2) reading algorithm. There is a new
8291 function BIO_new_mem_buf() which creates a read only memory BIO from
8292 an area of memory. Also modified the PKCS#7 routines to use read only
8296 *) Bugfix: ssl23_get_client_hello did not work properly when called in
8297 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
8298 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
8299 but a retry condition occured while trying to read the rest.
8302 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
8303 NID_pkcs7_encrypted by default: this was wrong since this should almost
8304 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
8305 the encrypted data type: this is a more sensible place to put it and it
8306 allows the PKCS#12 code to be tidied up that duplicated this
8310 *) Changed obj_dat.pl script so it takes its input and output files on
8311 the command line. This should avoid shell escape redirection problems
8315 *) Initial support for certificate extension requests, these are included
8316 in things like Xenroll certificate requests. Included functions to allow
8317 extensions to be obtained and added.
8320 *) -crlf option to s_client and s_server for sending newlines as
8321 CRLF (as required by many protocols).
8324 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
8326 *) Install libRSAglue.a when OpenSSL is built with RSAref.
8327 [Ralf S. Engelschall]
8329 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
8330 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
8332 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
8336 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
8337 DH parameters/keys (q is lost during that conversion, but the resulting
8338 DH parameters contain its length).
8340 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
8341 much faster than DH_generate_parameters (which creates parameters
8342 where p = 2*q + 1), and also the smaller q makes DH computations
8343 much more efficient (160-bit exponentiation instead of 1024-bit
8344 exponentiation); so this provides a convenient way to support DHE
8345 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
8346 utter importance to use
8347 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8349 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8350 when such DH parameters are used, because otherwise small subgroup
8351 attacks may become possible!
8354 *) Avoid memory leak in i2d_DHparams.
8357 *) Allow the -k option to be used more than once in the enc program:
8358 this allows the same encrypted message to be read by multiple recipients.
8361 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
8362 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
8363 it will always use the numerical form of the OID, even if it has a short
8367 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
8368 method only got called if p,q,dmp1,dmq1,iqmp components were present,
8369 otherwise bn_mod_exp was called. In the case of hardware keys for example
8370 no private key components need be present and it might store extra data
8371 in the RSA structure, which cannot be accessed from bn_mod_exp.
8372 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
8373 private key operations.
8376 *) Added support for SPARC Linux.
8379 *) pem_password_cb function type incompatibly changed from
8380 typedef int pem_password_cb(char *buf, int size, int rwflag);
8382 ....(char *buf, int size, int rwflag, void *userdata);
8383 so that applications can pass data to their callbacks:
8384 The PEM[_ASN1]_{read,write}... functions and macros now take an
8385 additional void * argument, which is just handed through whenever
8386 the password callback is called.
8387 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
8389 New function SSL_CTX_set_default_passwd_cb_userdata.
8391 Compatibility note: As many C implementations push function arguments
8392 onto the stack in reverse order, the new library version is likely to
8393 interoperate with programs that have been compiled with the old
8394 pem_password_cb definition (PEM_whatever takes some data that
8395 happens to be on the stack as its last argument, and the callback
8396 just ignores this garbage); but there is no guarantee whatsoever that
8399 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
8400 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
8401 problems not only on Windows, but also on some Unix platforms.
8402 To avoid problematic command lines, these definitions are now in an
8403 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
8404 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
8407 *) MIPS III/IV assembler module is reimplemented.
8410 *) More DES library cleanups: remove references to srand/rand and
8411 delete an unused file.
8414 *) Add support for the the free Netwide assembler (NASM) under Win32,
8415 since not many people have MASM (ml) and it can be hard to obtain.
8416 This is currently experimental but it seems to work OK and pass all
8417 the tests. Check out INSTALL.W32 for info.
8420 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
8421 without temporary keys kept an extra copy of the server key,
8422 and connections with temporary keys did not free everything in case
8426 *) New function RSA_check_key and new openssl rsa option -check
8427 for verifying the consistency of RSA keys.
8428 [Ulf Moeller, Bodo Moeller]
8430 *) Various changes to make Win32 compile work:
8431 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
8432 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
8433 comparison" warnings.
8434 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
8437 *) Add a debugging option to PKCS#5 v2 key generation function: when
8438 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
8439 derived keys are printed to stderr.
8442 *) Copy the flags in ASN1_STRING_dup().
8443 [Roman E. Pavlov <pre@mo.msk.ru>]
8445 *) The x509 application mishandled signing requests containing DSA
8446 keys when the signing key was also DSA and the parameters didn't match.
8448 It was supposed to omit the parameters when they matched the signing key:
8449 the verifying software was then supposed to automatically use the CA's
8450 parameters if they were absent from the end user certificate.
8452 Omitting parameters is no longer recommended. The test was also
8453 the wrong way round! This was probably due to unusual behaviour in
8454 EVP_cmp_parameters() which returns 1 if the parameters match.
8455 This meant that parameters were omitted when they *didn't* match and
8456 the certificate was useless. Certificates signed with 'ca' didn't have
8458 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
8460 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
8461 The interface is as follows:
8462 Applications can use
8463 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
8464 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
8465 "off" is now the default.
8466 The library internally uses
8467 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
8468 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
8469 to disable memory-checking temporarily.
8471 Some inconsistent states that previously were possible (and were
8472 even the default) are now avoided.
8474 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
8475 with each memory chunk allocated; this is occasionally more helpful
8476 than just having a counter.
8478 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
8480 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
8484 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
8485 which largely parallels "options", but is for changing API behaviour,
8486 whereas "options" are about protocol behaviour.
8487 Initial "mode" flags are:
8489 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
8490 a single record has been written.
8491 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
8492 retries use the same buffer location.
8493 (But all of the contents must be
8497 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
8500 *) Fix problems with no-hmac etc.
8501 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
8503 *) New functions RSA_get_default_method(), RSA_set_method() and
8504 RSA_get_method(). These allows replacement of RSA_METHODs without having
8505 to mess around with the internals of an RSA structure.
8508 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
8509 Also really enable memory leak checks in openssl.c and in some
8511 [Chad C. Mulligan, Bodo Moeller]
8513 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
8514 up the length of negative integers. This has now been simplified to just
8515 store the length when it is first determined and use it later, rather
8516 than trying to keep track of where data is copied and updating it to
8518 [Steve Henson, reported by Brien Wheeler
8519 <bwheeler@authentica-security.com>]
8521 *) Add a new function PKCS7_signatureVerify. This allows the verification
8522 of a PKCS#7 signature but with the signing certificate passed to the
8523 function itself. This contrasts with PKCS7_dataVerify which assumes the
8524 certificate is present in the PKCS#7 structure. This isn't always the
8525 case: certificates can be omitted from a PKCS#7 structure and be
8526 distributed by "out of band" means (such as a certificate database).
8529 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
8530 function prototypes in pem.h, also change util/mkdef.pl to add the
8531 necessary function names.
8534 *) mk1mf.pl (used by Windows builds) did not properly read the
8535 options set by Configure in the top level Makefile, and Configure
8536 was not even able to write more than one option correctly.
8537 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
8540 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
8541 file to be loaded from a BIO or FILE pointer. The BIO version will
8542 for example allow memory BIOs to contain config info.
8545 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
8546 Whoever hopes to achieve shared-library compatibility across versions
8547 must use this, not the compile-time macro.
8548 (Exercise 0.9.4: Which is the minimum library version required by
8550 Note: All this applies only to multi-threaded programs, others don't
8554 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
8555 through a BIO pair triggered the default case, i.e.
8556 SSLerr(...,SSL_R_UNKNOWN_STATE).
8559 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
8560 can use the SSL library even if none of the specific BIOs is
8564 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
8565 for the encoded length.
8566 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
8568 *) Add initial documentation of the X509V3 functions.
8571 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
8572 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
8573 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
8574 secure PKCS#8 private key format with a high iteration count.
8577 *) Fix determination of Perl interpreter: A perl or perl5
8578 _directory_ in $PATH was also accepted as the interpreter.
8579 [Ralf S. Engelschall]
8581 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
8582 wrong with it but it was very old and did things like calling
8583 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
8587 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
8588 to use the new extension code.
8591 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
8592 with macros. This should make it easier to change their form, add extra
8593 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
8597 *) Add to configuration table a new entry that can specify an alternative
8598 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
8599 according to Mark Crispin <MRC@Panda.COM>.
8603 *) DES CBC did not update the IV. Weird.
8606 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
8607 Changing the behaviour of the former might break existing programs --
8608 where IV updating is needed, des_ncbc_encrypt can be used.
8611 *) When bntest is run from "make test" it drives bc to check its
8612 calculations, as well as internally checking them. If an internal check
8613 fails, it needs to cause bc to give a non-zero result or make test carries
8614 on without noticing the failure. Fixed.
8617 *) DES library cleanups.
8620 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
8621 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
8622 ciphers. NOTE: although the key derivation function has been verified
8623 against some published test vectors it has not been extensively tested
8624 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
8628 *) Instead of "mkdir -p", which is not fully portable, use new
8629 Perl script "util/mkdir-p.pl".
8632 *) Rewrite the way password based encryption (PBE) is handled. It used to
8633 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
8634 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
8635 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
8636 the 'parameter' field of the AlgorithmIdentifier is passed to the
8637 underlying key generation function so it must do its own ASN1 parsing.
8638 This has also changed the EVP_PBE_CipherInit() function which now has a
8639 'parameter' argument instead of literal salt and iteration count values
8640 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
8643 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
8644 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
8645 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
8646 KEY" because this clashed with PKCS#8 unencrypted string. Since this
8647 value was just used as a "magic string" and not used directly its
8648 value doesn't matter.
8651 *) Introduce some semblance of const correctness to BN. Shame C doesn't
8655 *) "linux-sparc64" configuration (ultrapenguin).
8656 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
8657 "linux-sparc" configuration.
8658 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
8660 *) config now generates no-xxx options for missing ciphers.
8663 *) Support the EBCDIC character set (work in progress).
8664 File ebcdic.c not yet included because it has a different license.
8665 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8667 *) Support BS2000/OSD-POSIX.
8668 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8670 *) Make callbacks for key generation use void * instead of char *.
8673 *) Make S/MIME samples compile (not yet tested).
8676 *) Additional typesafe stacks.
8679 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
8683 Changes between 0.9.3 and 0.9.3a [29 May 1999]
8685 *) New configuration variant "sco5-gcc".
8687 *) Updated some demos.
8688 [Sean O Riordain, Wade Scholine]
8690 *) Add missing BIO_free at exit of pkcs12 application.
8693 *) Fix memory leak in conf.c.
8696 *) Updates for Win32 to assembler version of MD5.
8699 *) Set #! path to perl in apps/der_chop to where we found it
8700 instead of using a fixed path.
8703 *) SHA library changes for irix64-mips4-cc.
8706 *) Improvements for VMS support.
8710 Changes between 0.9.2b and 0.9.3 [24 May 1999]
8712 *) Bignum library bug fix. IRIX 6 passes "make test" now!
8713 This also avoids the problems with SC4.2 and unpatched SC5.
8714 [Andy Polyakov <appro@fy.chalmers.se>]
8716 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
8717 These are required because of the typesafe stack would otherwise break
8718 existing code. If old code used a structure member which used to be STACK
8719 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
8720 sk_num or sk_value it would produce an error because the num, data members
8721 are not present in STACK_OF. Now it just produces a warning. sk_set
8722 replaces the old method of assigning a value to sk_value
8723 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
8724 that does this will no longer work (and should use sk_set instead) but
8725 this could be regarded as a "questionable" behaviour anyway.
8728 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
8729 correctly handle encrypted S/MIME data.
8732 *) Change type of various DES function arguments from des_cblock
8733 (which means, in function argument declarations, pointer to char)
8734 to des_cblock * (meaning pointer to array with 8 char elements),
8735 which allows the compiler to do more typechecking; it was like
8736 that back in SSLeay, but with lots of ugly casts.
8738 Introduce new type const_des_cblock.
8741 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
8742 problems: find RecipientInfo structure that matches recipient certificate
8743 and initialise the ASN1 structures properly based on passed cipher.
8746 *) Belatedly make the BN tests actually check the results.
8749 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
8750 to and from BNs: it was completely broken. New compilation option
8751 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
8752 key elements as negative integers.
8755 *) Reorganize and speed up MD5.
8756 [Andy Polyakov <appro@fy.chalmers.se>]
8759 [Richard Levitte <richard@levitte.org>]
8761 *) New option -out to asn1parse to allow the parsed structure to be
8762 output to a file. This is most useful when combined with the -strparse
8763 option to examine the output of things like OCTET STRINGS.
8766 *) Make SSL library a little more fool-proof by not requiring any longer
8767 that SSL_set_{accept,connect}_state be called before
8768 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
8769 in many applications because usually everything *appeared* to work as
8770 intended anyway -- now it really works as intended).
8773 *) Move openssl.cnf out of lib/.
8776 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
8777 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
8778 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
8779 [Ralf S. Engelschall]
8781 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
8782 handle PKCS#7 enveloped data properly.
8783 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
8785 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
8786 copying pointers. The cert_st handling is changed by this in
8787 various ways (and thus what used to be known as ctx->default_cert
8788 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
8789 any longer when s->cert does not give us what we need).
8790 ssl_cert_instantiate becomes obsolete by this change.
8791 As soon as we've got the new code right (possibly it already is?),
8792 we have solved a couple of bugs of the earlier code where s->cert
8793 was used as if it could not have been shared with other SSL structures.
8795 Note that using the SSL API in certain dirty ways now will result
8796 in different behaviour than observed with earlier library versions:
8797 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
8798 does not influence s as it used to.
8800 In order to clean up things more thoroughly, inside SSL_SESSION
8801 we don't use CERT any longer, but a new structure SESS_CERT
8802 that holds per-session data (if available); currently, this is
8803 the peer's certificate chain and, for clients, the server's certificate
8804 and temporary key. CERT holds only those values that can have
8805 meaningful defaults in an SSL_CTX.
8808 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
8809 from the internal representation. Various PKCS#7 fixes: remove some
8810 evil casts and set the enc_dig_alg field properly based on the signing
8814 *) Allow PKCS#12 password to be set from the command line or the
8815 environment. Let 'ca' get its config file name from the environment
8816 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
8820 *) Allow certificate policies extension to use an IA5STRING for the
8821 organization field. This is contrary to the PKIX definition but
8822 VeriSign uses it and IE5 only recognises this form. Document 'x509'
8826 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
8827 without disallowing inline assembler and the like for non-pedantic builds.
8830 *) Support Borland C++ builder.
8831 [Janez Jere <jj@void.si>, modified by Ulf Möller]
8836 *) SHA-1 cleanups and performance enhancements.
8837 [Andy Polyakov <appro@fy.chalmers.se>]
8839 *) Sparc v8plus assembler for the bignum library.
8840 [Andy Polyakov <appro@fy.chalmers.se>]
8842 *) Accept any -xxx and +xxx compiler options in Configure.
8845 *) Update HPUX configuration.
8848 *) Add missing sk_<type>_unshift() function to safestack.h
8849 [Ralf S. Engelschall]
8851 *) New function SSL_CTX_use_certificate_chain_file that sets the
8852 "extra_cert"s in addition to the certificate. (This makes sense
8853 only for "PEM" format files, as chains as a whole are not
8857 *) Support verify_depth from the SSL API.
8858 x509_vfy.c had what can be considered an off-by-one-error:
8859 Its depth (which was not part of the external interface)
8860 was actually counting the number of certificates in a chain;
8861 now it really counts the depth.
8864 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
8865 instead of X509err, which often resulted in confusing error
8866 messages since the error codes are not globally unique
8867 (e.g. an alleged error in ssl3_accept when a certificate
8868 didn't match the private key).
8870 *) New function SSL_CTX_set_session_id_context that allows to set a default
8871 value (so that you don't need SSL_set_session_id_context for each
8872 connection using the SSL_CTX).
8875 *) OAEP decoding bug fix.
8878 *) Support INSTALL_PREFIX for package builders, as proposed by
8882 *) New Configure options "threads" and "no-threads". For systems
8883 where the proper compiler options are known (currently Solaris
8884 and Linux), "threads" is the default.
8887 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
8890 *) Install various scripts to $(OPENSSLDIR)/misc, not to
8891 $(INSTALLTOP)/bin -- they shouldn't clutter directories
8892 such as /usr/local/bin.
8895 *) "make linux-shared" to build shared libraries.
8896 [Niels Poppe <niels@netbox.org>]
8898 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
8901 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
8902 extension adding in x509 utility.
8905 *) Remove NOPROTO sections and error code comments.
8908 *) Partial rewrite of the DEF file generator to now parse the ANSI
8912 *) New Configure options --prefix=DIR and --openssldir=DIR.
8915 *) Complete rewrite of the error code script(s). It is all now handled
8916 by one script at the top level which handles error code gathering,
8917 header rewriting and C source file generation. It should be much better
8918 than the old method: it now uses a modified version of Ulf's parser to
8919 read the ANSI prototypes in all header files (thus the old K&R definitions
8920 aren't needed for error creation any more) and do a better job of
8921 translating function codes into names. The old 'ASN1 error code imbedded
8922 in a comment' is no longer necessary and it doesn't use .err files which
8923 have now been deleted. Also the error code call doesn't have to appear all
8924 on one line (which resulted in some large lines...).
8927 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
8930 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
8931 0 (which usually indicates a closed connection), but continue reading.
8934 *) Fix some race conditions.
8937 *) Add support for CRL distribution points extension. Add Certificate
8938 Policies and CRL distribution points documentation.
8941 *) Move the autogenerated header file parts to crypto/opensslconf.h.
8944 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8945 8 of keying material. Merlin has also confirmed interop with this fix
8946 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
8947 [Merlin Hughes <merlin@baltimore.ie>]
8949 *) Fix lots of warnings.
8950 [Richard Levitte <levitte@stacken.kth.se>]
8952 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
8953 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
8954 [Richard Levitte <levitte@stacken.kth.se>]
8956 *) Fix problems with sizeof(long) == 8.
8957 [Andy Polyakov <appro@fy.chalmers.se>]
8959 *) Change functions to ANSI C.
8962 *) Fix typos in error codes.
8963 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
8965 *) Remove defunct assembler files from Configure.
8968 *) SPARC v8 assembler BIGNUM implementation.
8969 [Andy Polyakov <appro@fy.chalmers.se>]
8971 *) Support for Certificate Policies extension: both print and set.
8972 Various additions to support the r2i method this uses.
8975 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
8976 return a const string when you are expecting an allocated buffer.
8979 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
8980 types DirectoryString and DisplayText.
8983 *) Add code to allow r2i extensions to access the configuration database,
8984 add an LHASH database driver and add several ctx helper functions.
8987 *) Fix an evil bug in bn_expand2() which caused various BN functions to
8988 fail when they extended the size of a BIGNUM.
8991 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
8992 support typesafe stack.
8995 *) Fix typo in SSL_[gs]et_options().
8996 [Nils Frostberg <nils@medcom.se>]
8998 *) Delete various functions and files that belonged to the (now obsolete)
8999 old X509V3 handling code.
9002 *) New Configure option "rsaref".
9005 *) Don't auto-generate pem.h.
9008 *) Introduce type-safe ASN.1 SETs.
9011 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
9012 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
9014 *) Introduce type-safe STACKs. This will almost certainly break lots of code
9015 that links with OpenSSL (well at least cause lots of warnings), but fear
9016 not: the conversion is trivial, and it eliminates loads of evil casts. A
9017 few STACKed things have been converted already. Feel free to convert more.
9018 In the fullness of time, I'll do away with the STACK type altogether.
9021 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
9022 specified in <certfile> by updating the entry in the index.txt file.
9023 This way one no longer has to edit the index.txt file manually for
9024 revoking a certificate. The -revoke option does the gory details now.
9025 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
9027 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
9028 `-text' option at all and this way the `-noout -text' combination was
9029 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
9030 [Ralf S. Engelschall]
9032 *) Make sure a corresponding plain text error message exists for the
9033 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
9034 verify callback function determined that a certificate was revoked.
9035 [Ralf S. Engelschall]
9037 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
9038 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
9039 all available cipers including rc5, which was forgotten until now.
9040 In order to let the testing shell script know which algorithms
9041 are available, a new (up to now undocumented) command
9042 "openssl list-cipher-commands" is used.
9045 *) Bugfix: s_client occasionally would sleep in select() when
9046 it should have checked SSL_pending() first.
9049 *) New functions DSA_do_sign and DSA_do_verify to provide access to
9050 the raw DSA values prior to ASN.1 encoding.
9053 *) Tweaks to Configure
9054 [Niels Poppe <niels@netbox.org>]
9056 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
9060 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
9063 *) New config option to avoid instructions that are illegal on the 80386.
9064 The default code is faster, but requires at least a 486.
9067 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
9068 SSL2_SERVER_VERSION (not used at all) macros, which are now the
9069 same as SSL2_VERSION anyway.
9072 *) New "-showcerts" option for s_client.
9075 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
9076 application. Various cleanups and fixes.
9079 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
9080 modify error routines to work internally. Add error codes and PBE init
9081 to library startup routines.
9084 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
9085 packing functions to asn1 and evp. Changed function names and error
9086 codes along the way.
9089 *) PKCS12 integration: and so it begins... First of several patches to
9090 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
9091 objects to objects.h
9094 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
9095 and display support for Thawte strong extranet extension.
9098 *) Add LinuxPPC support.
9099 [Jeff Dubrule <igor@pobox.org>]
9101 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
9102 bn_div_words in alpha.s.
9103 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
9105 *) Make sure the RSA OAEP test is skipped under -DRSAref because
9106 OAEP isn't supported when OpenSSL is built with RSAref.
9107 [Ulf Moeller <ulf@fitug.de>]
9109 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
9110 so they no longer are missing under -DNOPROTO.
9111 [Soren S. Jorvang <soren@t.dk>]
9114 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
9116 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
9117 doesn't work when the session is reused. Coming soon!
9120 *) Fix a security hole, that allows sessions to be reused in the wrong
9121 context thus bypassing client cert protection! All software that uses
9122 client certs and session caches in multiple contexts NEEDS PATCHING to
9123 allow session reuse! A fuller solution is in the works.
9124 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
9126 *) Some more source tree cleanups (removed obsolete files
9127 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
9128 permission on "config" script to be executable) and a fix for the INSTALL
9130 [Ulf Moeller <ulf@fitug.de>]
9132 *) Remove some legacy and erroneous uses of malloc, free instead of
9134 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
9136 *) Make rsa_oaep_test return non-zero on error.
9137 [Ulf Moeller <ulf@fitug.de>]
9139 *) Add support for native Solaris shared libraries. Configure
9140 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
9141 if someone would make that last step automatic.
9142 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
9144 *) ctx_size was not built with the right compiler during "make links". Fixed.
9147 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
9148 except NULL ciphers". This means the default cipher list will no longer
9149 enable NULL ciphers. They need to be specifically enabled e.g. with
9150 the string "DEFAULT:eNULL".
9153 *) Fix to RSA private encryption routines: if p < q then it would
9154 occasionally produce an invalid result. This will only happen with
9155 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
9158 *) Be less restrictive and allow also `perl util/perlpath.pl
9159 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
9160 because this way one can also use an interpreter named `perl5' (which is
9161 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
9162 installed as `perl').
9163 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9165 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
9166 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9168 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
9169 advapi32.lib to Win32 build and change the pem test comparision
9170 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
9171 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
9172 and crypto/des/ede_cbcm_enc.c.
9175 *) DES quad checksum was broken on big-endian architectures. Fixed.
9178 *) Comment out two functions in bio.h that aren't implemented. Fix up the
9179 Win32 test batch file so it (might) work again. The Win32 test batch file
9180 is horrible: I feel ill....
9183 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
9184 in e_os.h. Audit of header files to check ANSI and non ANSI
9185 sections: 10 functions were absent from non ANSI section and not exported
9186 from Windows DLLs. Fixed up libeay.num for new functions.
9189 *) Make `openssl version' output lines consistent.
9190 [Ralf S. Engelschall]
9192 *) Fix Win32 symbol export lists for BIO functions: Added
9193 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
9194 to ms/libeay{16,32}.def.
9195 [Ralf S. Engelschall]
9197 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
9198 fine under Unix and passes some trivial tests I've now added. But the
9199 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
9200 added to make sure no one expects that this stuff really works in the
9201 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
9202 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
9204 [Ralf S. Engelschall]
9206 *) Fix the generation of two part addresses in perl.
9207 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
9209 *) Add config entry for Linux on MIPS.
9210 [John Tobey <jtobey@channel1.com>]
9212 *) Make links whenever Configure is run, unless we are on Windoze.
9215 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
9216 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
9220 *) Add a useful kludge to allow package maintainers to specify compiler and
9221 other platforms details on the command line without having to patch the
9222 Configure script everytime: One now can use ``perl Configure
9223 <id>:<details>'', i.e. platform ids are allowed to have details appended
9224 to them (seperated by colons). This is treated as there would be a static
9225 pre-configured entry in Configure's %table under key <id> with value
9226 <details> and ``perl Configure <id>'' is called. So, when you want to
9227 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
9228 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
9229 now, which overrides the FreeBSD-elf entry on-the-fly.
9230 [Ralf S. Engelschall]
9232 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
9235 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
9236 on the `perl Configure ...' command line. This way one can compile
9237 OpenSSL libraries with Position Independent Code (PIC) which is needed
9238 for linking it into DSOs.
9239 [Ralf S. Engelschall]
9241 *) Remarkably, export ciphers were totally broken and no-one had noticed!
9245 *) Cleaned up the LICENSE document: The official contact for any license
9246 questions now is the OpenSSL core team under openssl-core@openssl.org.
9247 And add a paragraph about the dual-license situation to make sure people
9248 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
9249 to the OpenSSL toolkit.
9250 [Ralf S. Engelschall]
9252 *) General source tree makefile cleanups: Made `making xxx in yyy...'
9253 display consistent in the source tree and replaced `/bin/rm' by `rm'.
9254 Additonally cleaned up the `make links' target: Remove unnecessary
9255 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
9256 to speed processing and no longer clutter the display with confusing
9257 stuff. Instead only the actually done links are displayed.
9258 [Ralf S. Engelschall]
9260 *) Permit null encryption ciphersuites, used for authentication only. It used
9261 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
9262 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
9266 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
9267 signed attributes when verifying signatures (this would break them),
9268 the detached data encoding was wrong and public keys obtained using
9269 X509_get_pubkey() weren't freed.
9272 *) Add text documentation for the BUFFER functions. Also added a work around
9273 to a Win95 console bug. This was triggered by the password read stuff: the
9274 last character typed gets carried over to the next fread(). If you were
9275 generating a new cert request using 'req' for example then the last
9276 character of the passphrase would be CR which would then enter the first
9280 *) Added the new `Includes OpenSSL Cryptography Software' button as
9281 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
9282 button and can be used by applications based on OpenSSL to show the
9283 relationship to the OpenSSL project.
9284 [Ralf S. Engelschall]
9286 *) Remove confusing variables in function signatures in files
9287 ssl/ssl_lib.c and ssl/ssl.h.
9288 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9290 *) Don't install bss_file.c under PREFIX/include/
9291 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9293 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
9294 functions that return function pointers and has support for NT specific
9295 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
9296 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
9297 unsigned to signed types: this was killing the Win32 compile.
9300 *) Add new certificate file to stack functions,
9301 SSL_add_dir_cert_subjects_to_stack() and
9302 SSL_add_file_cert_subjects_to_stack(). These largely supplant
9303 SSL_load_client_CA_file(), and can be used to add multiple certs easily
9304 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
9305 This means that Apache-SSL and similar packages don't have to mess around
9306 to add as many CAs as they want to the preferred list.
9309 *) Experiment with doxygen documentation. Currently only partially applied to
9311 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
9312 openssl.doxy as the configuration file.
9315 *) Get rid of remaining C++-style comments which strict C compilers hate.
9316 [Ralf S. Engelschall, pointed out by Carlos Amengual]
9318 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
9319 compiled in by default: it has problems with large keys.
9322 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
9323 DH private keys and/or callback functions which directly correspond to
9324 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
9325 is needed for applications which have to configure certificates on a
9326 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
9328 For the RSA certificate situation is makes no difference, but
9329 for the DSA certificate situation this fixes the "no shared cipher"
9330 problem where the OpenSSL cipher selection procedure failed because the
9331 temporary keys were not overtaken from the context and the API provided
9332 no way to reconfigure them.
9333 The new functions now let applications reconfigure the stuff and they
9334 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
9335 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
9336 non-public-API function ssl_cert_instantiate() is used as a helper
9337 function and also to reduce code redundancy inside ssl_rsa.c.
9338 [Ralf S. Engelschall]
9340 *) Move s_server -dcert and -dkey options out of the undocumented feature
9341 area because they are useful for the DSA situation and should be
9342 recognized by the users.
9343 [Ralf S. Engelschall]
9345 *) Fix the cipher decision scheme for export ciphers: the export bits are
9346 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
9347 SSL_EXP_MASK. So, the original variable has to be used instead of the
9348 already masked variable.
9349 [Richard Levitte <levitte@stacken.kth.se>]
9351 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
9352 [Richard Levitte <levitte@stacken.kth.se>]
9354 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
9355 from `int' to `unsigned int' because it's a length and initialized by
9356 EVP_DigestFinal() which expects an `unsigned int *'.
9357 [Richard Levitte <levitte@stacken.kth.se>]
9359 *) Don't hard-code path to Perl interpreter on shebang line of Configure
9360 script. Instead use the usual Shell->Perl transition trick.
9361 [Ralf S. Engelschall]
9363 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
9364 (in addition to RSA certificates) to match the behaviour of `openssl dsa
9365 -noout -modulus' as it's already the case for `openssl rsa -noout
9366 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
9367 currently the public key is printed (a decision which was already done by
9368 `openssl dsa -modulus' in the past) which serves a similar purpose.
9369 Additionally the NO_RSA no longer completely removes the whole -modulus
9370 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
9372 [Ralf S. Engelschall]
9374 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
9375 BIO. See the source (crypto/evp/bio_ok.c) for more info.
9376 [Arne Ansper <arne@ats.cyber.ee>]
9378 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
9379 to be added. Now both 'req' and 'ca' can use new objects defined in the
9383 *) Add cool BIO that does syslog (or event log on NT).
9384 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
9386 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
9387 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
9388 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
9389 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
9392 *) Add preliminary config info for new extension code.
9395 *) Make RSA_NO_PADDING really use no padding.
9396 [Ulf Moeller <ulf@fitug.de>]
9398 *) Generate errors when private/public key check is done.
9401 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
9402 for some CRL extensions and new objects added.
9405 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
9406 key usage extension and fuller support for authority key id.
9409 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
9410 padding method for RSA, which is recommended for new applications in PKCS
9411 #1 v2.0 (RFC 2437, October 1998).
9412 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
9413 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
9414 against Bleichbacher's attack on RSA.
9415 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
9418 *) Updates to the new SSL compression code
9419 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9421 *) Fix so that the version number in the master secret, when passed
9422 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
9423 (because the server will not accept higher), that the version number
9424 is 0x03,0x01, not 0x03,0x00
9425 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9427 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
9428 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
9429 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
9432 *) Support for RAW extensions where an arbitrary extension can be
9433 created by including its DER encoding. See apps/openssl.cnf for
9437 *) Make sure latest Perl versions don't interpret some generated C array
9438 code as Perl array code in the crypto/err/err_genc.pl script.
9439 [Lars Weber <3weber@informatik.uni-hamburg.de>]
9441 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
9442 not many people have the assembler. Various Win32 compilation fixes and
9443 update to the INSTALL.W32 file with (hopefully) more accurate Win32
9447 *) Modify configure script 'Configure' to automatically create crypto/date.h
9448 file under Win32 and also build pem.h from pem.org. New script
9449 util/mkfiles.pl to create the MINFO file on environments that can't do a
9450 'make files': perl util/mkfiles.pl >MINFO should work.
9453 *) Major rework of DES function declarations, in the pursuit of correctness
9454 and purity. As a result, many evil casts evaporated, and some weirdness,
9455 too. You may find this causes warnings in your code. Zapping your evil
9456 casts will probably fix them. Mostly.
9459 *) Fix for a typo in asn1.h. Bug fix to object creation script
9460 obj_dat.pl. It considered a zero in an object definition to mean
9461 "end of object": none of the objects in objects.h have any zeros
9462 so it wasn't spotted.
9463 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
9465 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
9466 Masking (CBCM). In the absence of test vectors, the best I have been able
9467 to do is check that the decrypt undoes the encrypt, so far. Send me test
9468 vectors if you have them.
9471 *) Correct calculation of key length for export ciphers (too much space was
9472 allocated for null ciphers). This has not been tested!
9475 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
9476 message is now correct (it understands "crypto" and "ssl" on its
9477 command line). There is also now an "update" option. This will update
9478 the util/ssleay.num and util/libeay.num files with any new functions.
9480 perl util/mkdef.pl crypto ssl update
9481 it will update them.
9484 *) Overhauled the Perl interface (perl/*):
9485 - ported BN stuff to OpenSSL's different BN library
9486 - made the perl/ source tree CVS-aware
9487 - renamed the package from SSLeay to OpenSSL (the files still contain
9488 their history because I've copied them in the repository)
9489 - removed obsolete files (the test scripts will be replaced
9490 by better Test::Harness variants in the future)
9491 [Ralf S. Engelschall]
9493 *) First cut for a very conservative source tree cleanup:
9494 1. merge various obsolete readme texts into doc/ssleay.txt
9495 where we collect the old documents and readme texts.
9496 2. remove the first part of files where I'm already sure that we no
9497 longer need them because of three reasons: either they are just temporary
9498 files which were left by Eric or they are preserved original files where
9499 I've verified that the diff is also available in the CVS via "cvs diff
9500 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
9501 the crypto/md/ stuff).
9502 [Ralf S. Engelschall]
9504 *) More extension code. Incomplete support for subject and issuer alt
9505 name, issuer and authority key id. Change the i2v function parameters
9506 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
9507 what that's for :-) Fix to ASN1 macro which messed up
9508 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
9511 *) Preliminary support for ENUMERATED type. This is largely copied from the
9515 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
9516 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9518 *) Make sure `make rehash' target really finds the `openssl' program.
9519 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9521 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
9522 like to hear about it if this slows down other processors.
9525 *) Add CygWin32 platform information to Configure script.
9526 [Alan Batie <batie@aahz.jf.intel.com>]
9528 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
9529 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
9531 *) New program nseq to manipulate netscape certificate sequences
9534 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
9538 *) Fixes to BN code. Previously the default was to define BN_RECURSION
9539 but the BN code had some problems that would cause failures when
9540 doing certificate verification and some other functions.
9541 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9543 *) Add ASN1 and PEM code to support netscape certificate sequences.
9546 *) Add ASN1 and PEM code to support netscape certificate sequences.
9549 *) Add several PKIX and private extended key usage OIDs.
9552 *) Modify the 'ca' program to handle the new extension code. Modify
9553 openssl.cnf for new extension format, add comments.
9556 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
9557 and add a sample to openssl.cnf so req -x509 now adds appropriate
9561 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
9562 error code, add initial support to X509_print() and x509 application.
9565 *) Takes a deep breath and start addding X509 V3 extension support code. Add
9566 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
9567 stuff is currently isolated and isn't even compiled yet.
9570 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
9571 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
9572 Removed the versions check from X509 routines when loading extensions:
9573 this allows certain broken certificates that don't set the version
9574 properly to be processed.
9577 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
9578 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
9579 can still be regenerated with "make depend".
9582 *) Spelling mistake in C version of CAST-128.
9583 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
9585 *) Changes to the error generation code. The perl script err-code.pl
9586 now reads in the old error codes and retains the old numbers, only
9587 adding new ones if necessary. It also only changes the .err files if new
9588 codes are added. The makefiles have been modified to only insert errors
9589 when needed (to avoid needlessly modifying header files). This is done
9590 by only inserting errors if the .err file is newer than the auto generated
9591 C file. To rebuild all the error codes from scratch (the old behaviour)
9592 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
9593 or delete all the .err files.
9596 *) CAST-128 was incorrectly implemented for short keys. The C version has
9597 been fixed, but is untested. The assembler versions are also fixed, but
9598 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
9599 to regenerate it if needed.
9600 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
9601 Hagino <itojun@kame.net>]
9603 *) File was opened incorrectly in randfile.c.
9604 [Ulf Möller <ulf@fitug.de>]
9606 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
9607 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
9608 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
9609 al: it's just almost always a UTCTime. Note this patch adds new error
9610 codes so do a "make errors" if there are problems.
9613 *) Correct Linux 1 recognition in config.
9614 [Ulf Möller <ulf@fitug.de>]
9616 *) Remove pointless MD5 hash when using DSA keys in ca.
9617 [Anonymous <nobody@replay.com>]
9619 *) Generate an error if given an empty string as a cert directory. Also
9620 generate an error if handed NULL (previously returned 0 to indicate an
9621 error, but didn't set one).
9622 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
9624 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
9627 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
9628 parameters. This was causing a warning which killed off the Win32 compile.
9631 *) Remove C++ style comments from crypto/bn/bn_local.h.
9632 [Neil Costigan <neil.costigan@celocom.com>]
9634 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
9635 based on a text string, looking up short and long names and finally
9636 "dot" format. The "dot" format stuff didn't work. Added new function
9637 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
9638 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
9639 OID is not part of the table.
9642 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
9643 X509_LOOKUP_by_alias().
9646 *) Sort openssl functions by name.
9649 *) Get the gendsa program working (hopefully) and add it to app list. Remove
9650 encryption from sample DSA keys (in case anyone is interested the password
9654 *) Make _all_ *_free functions accept a NULL pointer.
9655 [Frans Heymans <fheymans@isaserver.be>]
9657 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
9659 [Anonymous <nobody@replay.com>]
9661 *) s_server should send the CAfile as acceptable CAs, not its own cert.
9662 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9664 *) Don't blow it for numeric -newkey arguments to apps/req.
9665 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9667 *) Temp key "for export" tests were wrong in s3_srvr.c.
9668 [Anonymous <nobody@replay.com>]
9670 *) Add prototype for temp key callback functions
9671 SSL_CTX_set_tmp_{rsa,dh}_callback().
9674 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
9675 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
9678 *) X509_name_add_entry() freed the wrong thing after an error.
9679 [Arne Ansper <arne@ats.cyber.ee>]
9681 *) rsa_eay.c would attempt to free a NULL context.
9682 [Arne Ansper <arne@ats.cyber.ee>]
9684 *) BIO_s_socket() had a broken should_retry() on Windoze.
9685 [Arne Ansper <arne@ats.cyber.ee>]
9687 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
9688 [Arne Ansper <arne@ats.cyber.ee>]
9690 *) Make sure the already existing X509_STORE->depth variable is initialized
9691 in X509_STORE_new(), but document the fact that this variable is still
9692 unused in the certificate verification process.
9693 [Ralf S. Engelschall]
9695 *) Fix the various library and apps files to free up pkeys obtained from
9696 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
9699 *) Fix reference counting in X509_PUBKEY_get(). This makes
9700 demos/maurice/example2.c work, amongst others, probably.
9701 [Steve Henson and Ben Laurie]
9703 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
9704 `openssl' and second, the shortcut symlinks for the `openssl <command>'
9705 are no longer created. This way we have a single and consistent command
9706 line interface `openssl <command>', similar to `cvs <command>'.
9707 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
9709 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
9710 BIT STRING wrapper always have zero unused bits.
9713 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
9716 *) Make the top-level INSTALL documentation easier to understand.
9719 *) Makefiles updated to exit if an error occurs in a sub-directory
9720 make (including if user presses ^C) [Paul Sutton]
9722 *) Make Montgomery context stuff explicit in RSA data structure.
9725 *) Fix build order of pem and err to allow for generated pem.h.
9728 *) Fix renumbering bug in X509_NAME_delete_entry().
9731 *) Enhanced the err-ins.pl script so it makes the error library number
9732 global and can add a library name. This is needed for external ASN1 and
9733 other error libraries.
9736 *) Fixed sk_insert which never worked properly.
9739 *) Fix ASN1 macros so they can handle indefinite length construted
9740 EXPLICIT tags. Some non standard certificates use these: they can now
9744 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
9745 into a single doc/ssleay.txt bundle. This way the information is still
9746 preserved but no longer messes up this directory. Now it's new room for
9747 the new set of documenation files.
9748 [Ralf S. Engelschall]
9750 *) SETs were incorrectly DER encoded. This was a major pain, because they
9751 shared code with SEQUENCEs, which aren't coded the same. This means that
9752 almost everything to do with SETs or SEQUENCEs has either changed name or
9753 number of arguments.
9754 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
9756 *) Fix test data to work with the above.
9759 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
9760 was already fixed by Eric for 0.9.1 it seems.
9761 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
9763 *) Autodetect FreeBSD3.
9766 *) Fix various bugs in Configure. This affects the following platforms:
9770 unixware-2.0-pentium
9774 *) Eliminate generated files from CVS. Reorder tests to regenerate files
9775 before they are needed.
9778 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
9782 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
9784 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
9785 changed SSLeay to OpenSSL in version strings.
9786 [Ralf S. Engelschall]
9788 *) Some fixups to the top-level documents.
9791 *) Fixed the nasty bug where rsaref.h was not found under compile-time
9792 because the symlink to include/ was missing.
9793 [Ralf S. Engelschall]
9795 *) Incorporated the popular no-RSA/DSA-only patches
9796 which allow to compile a RSA-free SSLeay.
9797 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
9799 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
9800 when "ssleay" is still not found.
9801 [Ralf S. Engelschall]
9803 *) Added more platforms to Configure: Cray T3E, HPUX 11,
9804 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
9806 *) Updated the README file.
9807 [Ralf S. Engelschall]
9809 *) Added various .cvsignore files in the CVS repository subdirs
9810 to make a "cvs update" really silent.
9811 [Ralf S. Engelschall]
9813 *) Recompiled the error-definition header files and added
9814 missing symbols to the Win32 linker tables.
9815 [Ralf S. Engelschall]
9817 *) Cleaned up the top-level documents;
9818 o new files: CHANGES and LICENSE
9819 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
9820 o merged COPYRIGHT into LICENSE
9821 o removed obsolete TODO file
9822 o renamed MICROSOFT to INSTALL.W32
9823 [Ralf S. Engelschall]
9825 *) Removed dummy files from the 0.9.1b source tree:
9826 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
9827 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
9828 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
9829 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
9830 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
9831 [Ralf S. Engelschall]
9833 *) Added various platform portability fixes.
9836 *) The Genesis of the OpenSSL rpject:
9837 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
9838 Young and Tim J. Hudson created while they were working for C2Net until
9840 [The OpenSSL Project]
9843 Changes between 0.9.0b and 0.9.1b [not released]
9845 *) Updated a few CA certificates under certs/
9848 *) Changed some BIGNUM api stuff.
9851 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
9852 DGUX x86, Linux Alpha, etc.
9855 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
9856 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
9860 *) Add -strparse option to asn1pars program which parses nested
9862 [Dr Stephen Henson <shenson@bigfoot.com>]
9864 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
9867 *) DSA fix for "ca" program.
9870 *) Added "-genkey" option to "dsaparam" program.
9873 *) Added RIPE MD160 (rmd160) message digest.
9876 *) Added -a (all) option to "ssleay version" command.
9879 *) Added PLATFORM define which is the id given to Configure.
9882 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
9885 *) Extended the ASN.1 parser routines.
9888 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
9891 *) Added a BN_CTX to the BN library.
9894 *) Fixed the weak key values in DES library
9897 *) Changed API in EVP library for cipher aliases.
9900 *) Added support for RC2/64bit cipher.
9903 *) Converted the lhash library to the crypto/mem.c functions.
9906 *) Added more recognized ASN.1 object ids.
9909 *) Added more RSA padding checks for SSL/TLS.
9912 *) Added BIO proxy/filter functionality.
9915 *) Added extra_certs to SSL_CTX which can be used
9916 send extra CA certificates to the client in the CA cert chain sending
9917 process. It can be configured with SSL_CTX_add_extra_chain_cert().
9920 *) Now Fortezza is denied in the authentication phase because
9921 this is key exchange mechanism is not supported by SSLeay at all.
9924 *) Additional PKCS1 checks.
9927 *) Support the string "TLSv1" for all TLS v1 ciphers.
9930 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
9931 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
9934 *) Fixed a few memory leaks.
9937 *) Fixed various code and comment typos.
9940 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
9941 bytes sent in the client random.
9942 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob