5 Changes between 0.9.8b and 0.9.9 [xx XXX xxxx]
7 *) In addition to the numerical (unsigned long) thread ID, provide
8 for a pointer (void *) thread ID. This helps accomodate systems
9 that do not provide an unsigned long thread ID. OpenSSL assumes
10 it is in the same thread iff both the numerical and the pointer
11 thread ID agree; so applications are just required to define one
12 of them appropriately (e.g., by using a pointer to a per-thread
13 memory object malloc()ed by the application for the pointer-type
14 thread ID). Exactly analoguous to the existing functions
16 void CRYPTO_set_id_callback(unsigned long (*func)(void));
17 unsigned long (*CRYPTO_get_id_callback(void))(void);
18 unsigned long CRYPTO_thread_id(void);
20 we now have additional functions
22 void CRYPTO_set_idptr_callback(void *(*func)(void));
23 void *(*CRYPTO_get_idptr_callback(void))(void);
24 void *CRYPTO_thread_idptr(void);
26 also in <openssl/crypto.h>. The default value for
27 CRYPTO_thread_idptr() if the application has not provided its own
31 *) Change the array representation of binary polynomials: the list
32 of degrees of non-zero coefficients is now terminated with -1.
33 Previously it was terminated with 0, which was also part of the
34 value; thus, the array representation was not applicable to
35 polynomials where t^0 has coefficient zero. This change makes
36 the array representation useful in a more general context.
39 *) Various modifications and fixes to SSL/TLS cipher string
40 handling. For ECC, the code now distinguishes between fixed ECDH
41 with RSA certificates on the one hand and with ECDSA certificates
42 on the other hand, since these are separate ciphersuites. The
43 unused code for Fortezza ciphersuites has been removed.
45 For consistency with EDH, ephemeral ECDH is now called "EECDH"
46 (not "ECDHE"). For consistency with the code for DH
47 certificates, use of ECDH certificates is now considered ECDH
48 authentication, not RSA or ECDSA authentication (the latter is
49 merely the CA's signing algorithm and not actively used in the
52 The temporary ciphersuite alias "ECCdraft" is no longer
53 available, and ECC ciphersuites are no longer excluded from "ALL"
54 and "DEFAULT". The following aliases now exist for RFC 4492
55 ciphersuites, most of these by analogy with the DH case:
57 kECDHr - ECDH cert, signed with RSA
58 kECDHe - ECDH cert, signed with ECDSA
59 kECDH - ECDH cert (signed with either RSA or ECDSA)
60 kEECDH - ephemeral ECDH
61 ECDH - ECDH cert or ephemeral ECDH
67 AECDH - anonymous ECDH
68 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
72 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
73 Use correct micalg parameters depending on digest(s) in signed message.
76 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
77 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
80 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
81 an engine to register a method. Add ENGINE lookups for methods and
82 functional reference processing.
85 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
86 EVP_{Sign,Verify}* which allow an application to customise the signature
90 *) New -resign option to smime utility. This adds one or more signers
91 to an existing PKCS#7 signedData structure. Also -md option to use an
92 alternative message digest algorithm for signing.
95 *) Tidy up PKCS#7 routines and add new functions to make it easier to
96 create PKCS7 structures containing multiple signers. Update smime
97 application to support multiple signers.
100 *) New -macalg option to pkcs12 utility to allow setting of an alternative
104 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
105 Reorganize PBE internals to lookup from a static table using NIDs,
106 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
107 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
108 PRF which will be automatically used with PBES2.
111 *) Replace the algorithm specific calls to generate keys in "req" with the
115 *) Update PKCS#7 enveloped data routines to use new API. This is now
116 supported by any public key method supporting the encrypt operation. A
117 ctrl is added to allow the public key algorithm to examine or modify
118 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
122 *) Add a ctrl to asn1 method to allow a public key algorithm to express
123 a default digest type to use. In most cases this will be SHA1 but some
124 algorithms (such as GOST) need to specify an alternative digest. The
125 return value indicates how strong the prefernce is 1 means optional and
126 2 is mandatory (that is it is the only supported type). Modify
127 ASN1_item_sign() to accept a NULL digest argument to indicate it should
128 use the default md. Update openssl utilities to use the default digest
129 type for signing if it is not explicitly indicated.
132 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
133 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
134 signing method from the key type. This effectively removes the link
135 between digests and public key types.
138 *) Add an OID cross reference table and utility functions. Its purpose is to
139 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
140 rsaEncryption. This will allow some of the algorithm specific hackery
141 needed to use the correct OID to be removed.
144 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
145 structures for PKCS7_sign(). They are now set up by the relevant public
149 *) Add provisional EC pkey method with support for ECDSA and ECDH.
152 *) Add support for key derivation (agreement) in the API, DH method and
156 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
157 public and private key formats. As a side effect these add additional
158 command line functionality not previously available: DSA signatures can be
159 generated and verified using pkeyutl and DH key support and generation in
164 [Oliver Tappe <zooey@hirschkaefer.de>]
166 *) New make target "install_html_docs" installs HTML renditions of the
168 [Oliver Tappe <zooey@hirschkaefer.de>]
170 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
171 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
172 support key and parameter generation and add initial key generation
173 functionality for RSA.
176 *) Add functions for main EVP_PKEY_method operations. The undocumented
177 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
178 EVP_PKEY_{encrypt,decrypt}_old.
181 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
182 key API, doesn't do much yet.
185 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
186 public key algorithms. New option to openssl utility:
187 "list-public-key-algorithms" to print out info.
190 *) Implement the Supported Elliptic Curves Extension for
191 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
194 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
195 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
198 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
199 utilities such as rsa, dsa, dsaparam etc except they process any key
203 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
204 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
205 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
209 *) Initial support for pluggable public key ASN1.
210 De-spaghettify the public key ASN1 handling. Move public and private
211 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
212 algorithm specific handling to a single module within the relevant
213 algorithm directory. Add functions to allow (near) opaque processing
214 of public and private key structures.
217 *) Implement the Supported Point Formats Extension for
218 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
221 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
222 for the psk identity [hint] and the psk callback functions to the
223 SSL_SESSION, SSL and SSL_CTX structure.
226 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
230 SSL_CTX_use_psk_identity_hint
231 SSL_get_psk_identity_hint
233 SSL_use_psk_identity_hint
235 [Mika Kousa and Pasi Eronen of Nokia Corporation]
237 *) Add RFC 3161 compliant time stamp request creation, response generation
238 and response verification functionality.
239 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
241 *) Add initial support for TLS extensions, specifically for the server_name
242 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
243 have new members for a host name. The SSL data structure has an
244 additional member SSL_CTX *initial_ctx so that new sessions can be
245 stored in that context to allow for session resumption, even after the
246 SSL has been switched to a new SSL_CTX in reaction to a client's
247 server_name extension.
249 New functions (subject to change):
252 SSL_get_servername_type()
255 New CTRL codes and macros (subject to change):
257 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
258 - SSL_CTX_set_tlsext_servername_callback()
259 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
260 - SSL_CTX_set_tlsext_servername_arg()
261 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_hostname()
263 openssl s_client has a new '-servername ...' option.
265 openssl s_server has new options '-servername_host ...', '-cert2 ...',
266 '-key2 ...', '-servername_fatal' (subject to change). This allows
267 testing the HostName extension for a specific single host name ('-cert'
268 and '-key' remain fallbacks for handshakes without HostName
269 negotiation). If the unrecogninzed_name alert has to be sent, this by
270 default is a warning; it becomes fatal with the '-servername_fatal'
273 [Peter Sylvester, Remy Allais, Christophe Renou]
275 *) Whirlpool hash implementation is added.
278 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
279 bn(64,32). Because of instruction set limitations it doesn't have
280 any negative impact on performance. This was done mostly in order
281 to make it possible to share assembler modules, such as bn_mul_mont
282 implementations, between 32- and 64-bit builds without hassle.
285 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
286 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
290 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
291 dedicated Montgomery multiplication procedure, is introduced.
292 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
293 "64-bit" performance on certain 32-bit targets.
296 *) New option SSL_OP_NO_COMP to disable use of compression selectively
297 in SSL structures. New SSL ctrl to set maximum send fragment size.
298 Save memory by seeting the I/O buffer sizes dynamically instead of
299 using the maximum available value.
302 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
303 in addition to the text details.
306 *) Very, very preliminary EXPERIMENTAL support for printing of general
307 ASN1 structures. This currently produces rather ugly output and doesn't
308 handle several customised structures at all.
311 *) Integrated support for PVK file format and some related formats such
312 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
313 these in the 'rsa' and 'dsa' utilities.
316 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
319 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
320 place for the (very old) "NETSCAPE" format certificates which are now
321 handled using new ASN1 code equivalents.
324 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
325 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
326 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
329 *) Modify CRL distribution points extension code to print out previously
330 unsupported fields. Enhance extension setting code to allow setting of
334 *) Add print and set support for Issuing Distribution Point CRL extension.
337 *) Change 'Configure' script to enable Camellia by default.
340 Changes between 0.9.8b and 0.9.8c [xx XXX xxxx]
342 *) Change the Unix randomness entropy gathering to use poll() when
343 possible instead of select(), since the latter has some
344 undesirable limitations.
345 [Darryl Miles via Richard Levitte and Bodo Moeller]
347 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
348 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
349 cannot be implicitly activated as part of, e.g., the "AES" alias.
350 However, please upgrade to OpenSSL 0.9.9[-dev] for
351 non-experimental use of the ECC ciphersuites to get TLS extension
352 support, which is required for curve and point format negotiation
353 to avoid potential handshake problems.
356 *) Disable rogue ciphersuites:
358 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
359 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
360 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
362 The latter two were purportedly from
363 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
366 Also deactive the remaining ciphersuites from
367 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
368 unofficial, and the ID has long expired.
371 *) Fix RSA blinding Heisenbug (problems sometimes occured on
372 dual-core machines) and other potential thread-safety issues.
375 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
376 versions), which is now available for royalty-free use
377 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
378 Also, add Camellia TLS ciphersuites from RFC 4132.
380 To minimize changes between patchlevels in the OpenSSL 0.9.8
381 series, Camellia remains excluded from compilation unless OpenSSL
382 is configured with 'enable-camellia'.
385 *) Disable the padding bug check when compression is in use. The padding
386 bug check assumes the first packet is of even length, this is not
387 necessarily true if compresssion is enabled and can result in false
388 positives causing handshake failure. The actual bug test is ancient
389 code so it is hoped that implementations will either have fixed it by
390 now or any which still have the bug do not support compression.
393 Changes between 0.9.8a and 0.9.8b [04 May 2006]
395 *) When applying a cipher rule check to see if string match is an explicit
396 cipher suite and only match that one cipher suite if it is.
399 *) Link in manifests for VC++ if needed.
400 [Austin Ziegler <halostatue@gmail.com>]
402 *) Update support for ECC-based TLS ciphersuites according to
403 draft-ietf-tls-ecc-12.txt with proposed changes (but without
404 TLS extensions, which are supported starting with the 0.9.9
405 branch, not in the OpenSSL 0.9.8 branch).
408 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
409 opaque EVP_CIPHER_CTX handling.
412 *) Fixes and enhancements to zlib compression code. We now only use
413 "zlib1.dll" and use the default __cdecl calling convention on Win32
414 to conform with the standards mentioned here:
415 http://www.zlib.net/DLL_FAQ.txt
416 Static zlib linking now works on Windows and the new --with-zlib-include
417 --with-zlib-lib options to Configure can be used to supply the location
418 of the headers and library. Gracefully handle case where zlib library
422 *) Several fixes and enhancements to the OID generation code. The old code
423 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
424 handle numbers larger than ULONG_MAX, truncated printing and had a
425 non standard OBJ_obj2txt() behaviour.
428 *) Add support for building of engines under engine/ as shared libraries
429 under VC++ build system.
432 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
433 Hopefully, we will not see any false combination of paths any more.
436 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
438 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
439 (part of SSL_OP_ALL). This option used to disable the
440 countermeasure against man-in-the-middle protocol-version
441 rollback in the SSL 2.0 server implementation, which is a bad
442 idea. (CVE-2005-2969)
444 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
445 for Information Security, National Institute of Advanced Industrial
446 Science and Technology [AIST], Japan)]
448 *) Add two function to clear and return the verify parameter flags.
451 *) Keep cipherlists sorted in the source instead of sorting them at
452 runtime, thus removing the need for a lock.
455 *) Avoid some small subgroup attacks in Diffie-Hellman.
456 [Nick Mathewson and Ben Laurie]
458 *) Add functions for well-known primes.
461 *) Extended Windows CE support.
462 [Satoshi Nakamura and Andy Polyakov]
464 *) Initialize SSL_METHOD structures at compile time instead of during
465 runtime, thus removing the need for a lock.
468 *) Make PKCS7_decrypt() work even if no certificate is supplied by
469 attempting to decrypt each encrypted key in turn. Add support to
473 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
475 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
478 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
481 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
482 key into the same file any more.
485 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
488 *) Add -utf8 command line and config file option to 'ca'.
489 [Stefan <stf@udoma.org]
491 *) Removed the macro des_crypt(), as it seems to conflict with some
492 libraries. Use DES_crypt().
495 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
496 involves renaming the source and generated shared-libs for
497 both. The engines will accept the corrected or legacy ids
498 ('ncipher' and '4758_cca' respectively) when binding. NB,
499 this only applies when building 'shared'.
500 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
502 *) Add attribute functions to EVP_PKEY structure. Modify
503 PKCS12_create() to recognize a CSP name attribute and
504 use it. Make -CSP option work again in pkcs12 utility.
507 *) Add new functionality to the bn blinding code:
508 - automatic re-creation of the BN_BLINDING parameters after
509 a fixed number of uses (currently 32)
510 - add new function for parameter creation
511 - introduce flags to control the update behaviour of the
512 BN_BLINDING parameters
513 - hide BN_BLINDING structure
514 Add a second BN_BLINDING slot to the RSA structure to improve
515 performance when a single RSA object is shared among several
519 *) Add support for DTLS.
520 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
522 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
523 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
526 *) Remove buggy and incompletet DH cert support from
527 ssl/ssl_rsa.c and ssl/s3_both.c
530 *) Use SHA-1 instead of MD5 as the default digest algorithm for
531 the apps/openssl applications.
534 *) Compile clean with "-Wall -Wmissing-prototypes
535 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
536 DEBUG_SAFESTACK must also be set.
539 *) Change ./Configure so that certain algorithms can be disabled by default.
540 The new counterpiece to "no-xxx" is "enable-xxx".
542 The patented RC5 and MDC2 algorithms will now be disabled unless
543 "enable-rc5" and "enable-mdc2", respectively, are specified.
545 (IDEA remains enabled despite being patented. This is because IDEA
546 is frequently required for interoperability, and there is no license
547 fee for non-commercial use. As before, "no-idea" can be used to
548 avoid this algorithm.)
552 *) Add processing of proxy certificates (see RFC 3820). This work was
553 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
554 EGEE (Enabling Grids for E-science in Europe).
557 *) RC4 performance overhaul on modern architectures/implementations, such
558 as Intel P4, IA-64 and AMD64.
561 *) New utility extract-section.pl. This can be used specify an alternative
562 section number in a pod file instead of having to treat each file as
563 a separate case in Makefile. This can be done by adding two lines to the
566 =for comment openssl_section:XXX
568 The blank line is mandatory.
572 *) New arguments -certform, -keyform and -pass for s_client and s_server
573 to allow alternative format key and certificate files and passphrase
577 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
578 update associated structures and add various utility functions.
580 Add new policy related verify parameters, include policy checking in
581 standard verify code. Enhance 'smime' application with extra parameters
582 to support policy checking and print out.
585 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
586 Nehemiah processors. These extensions support AES encryption in hardware
587 as well as RNG (though RNG support is currently disabled).
588 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
590 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
593 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
594 [Andy Polyakov and a number of other people]
596 *) Improved PowerPC platform support. Most notably BIGNUM assembler
597 implementation contributed by IBM.
598 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
600 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
601 exponent rather than 'unsigned long'. There is a corresponding change to
602 the new 'rsa_keygen' element of the RSA_METHOD structure.
603 [Jelte Jansen, Geoff Thorpe]
605 *) Functionality for creating the initial serial number file is now
606 moved from CA.pl to the 'ca' utility with a new option -create_serial.
608 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
609 number file to 1, which is bound to cause problems. To avoid
610 the problems while respecting compatibility between different 0.9.7
611 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
612 CA.pl for serial number initialization. With the new release 0.9.8,
613 we can fix the problem directly in the 'ca' utility.)
616 *) Reduced header interdepencies by declaring more opaque objects in
617 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
618 give fewer recursive includes, which could break lazy source code - so
619 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
620 developers should define this symbol when building and using openssl to
621 ensure they track the recommended behaviour, interfaces, [etc], but
622 backwards-compatible behaviour prevails when this isn't defined.
625 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
628 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
629 This will generate a random key of the appropriate length based on the
630 cipher context. The EVP_CIPHER can provide its own random key generation
631 routine to support keys of a specific form. This is used in the des and
632 3des routines to generate a key of the correct parity. Update S/MIME
633 code to use new functions and hence generate correct parity DES keys.
634 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
635 valid (weak or incorrect parity).
638 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
639 as looking them up. This is useful when the verified structure may contain
640 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
641 present unless the new PKCS7_NO_CRL flag is asserted.
644 *) Extend ASN1 oid configuration module. It now additionally accepts the
647 shortName = some long name, 1.2.3.4
650 *) Reimplemented the BN_CTX implementation. There is now no more static
651 limitation on the number of variables it can handle nor the depth of the
652 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
653 information can now expand as required, and rather than having a single
654 static array of bignums, BN_CTX now uses a linked-list of such arrays
655 allowing it to expand on demand whilst maintaining the usefulness of
659 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
660 to allow all RSA operations to function using a single BN_CTX.
663 *) Preliminary support for certificate policy evaluation and checking. This
664 is initially intended to pass the tests outlined in "Conformance Testing
665 of Relying Party Client Certificate Path Processing Logic" v1.07.
668 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
669 remained unused and not that useful. A variety of other little bignum
670 tweaks and fixes have also been made continuing on from the audit (see
674 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
675 associated ASN1, EVP and SSL functions and old ASN1 macros.
678 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
679 and this should never fail. So the return value from the use of
680 BN_set_word() (which can fail due to needless expansion) is now deprecated;
681 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
684 *) BN_CTX_get() should return zero-valued bignums, providing the same
685 initialised value as BN_new().
686 [Geoff Thorpe, suggested by Ulf Möller]
688 *) Support for inhibitAnyPolicy certificate extension.
691 *) An audit of the BIGNUM code is underway, for which debugging code is
692 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
693 is considered valid when processing BIGNUMs, and causes execution to
694 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
695 further steps are taken to deliberately pollute unused data in BIGNUM
696 structures to try and expose faulty code further on. For now, openssl will
697 (in its default mode of operation) continue to tolerate the inconsistent
698 forms that it has tolerated in the past, but authors and packagers should
699 consider trying openssl and their own applications when compiled with
700 these debugging symbols defined. It will help highlight potential bugs in
701 their own code, and will improve the test coverage for OpenSSL itself. At
702 some point, these tighter rules will become openssl's default to improve
703 maintainability, though the assert()s and other overheads will remain only
704 in debugging configurations. See bn.h for more details.
705 [Geoff Thorpe, Nils Larsch, Ulf Möller]
707 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
708 that can only be obtained through BN_CTX_new() (which implicitly
709 initialises it). The presence of this function only made it possible
710 to overwrite an existing structure (and cause memory leaks).
713 *) Because of the callback-based approach for implementing LHASH as a
714 template type, lh_insert() adds opaque objects to hash-tables and
715 lh_doall() or lh_doall_arg() are typically used with a destructor callback
716 to clean up those corresponding objects before destroying the hash table
717 (and losing the object pointers). So some over-zealous constifications in
718 LHASH have been relaxed so that lh_insert() does not take (nor store) the
719 objects as "const" and the lh_doall[_arg] callback wrappers are not
720 prototyped to have "const" restrictions on the object pointers they are
721 given (and so aren't required to cast them away any more).
724 *) The tmdiff.h API was so ugly and minimal that our own timing utility
725 (speed) prefers to use its own implementation. The two implementations
726 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
727 its object type properly exposed (MS_TM) instead of casting to/from "char
728 *". This may still change yet if someone realises MS_TM and "ms_time_***"
729 aren't necessarily the greatest nomenclatures - but this is what was used
730 internally to the implementation so I've used that for now.
733 *) Ensure that deprecated functions do not get compiled when
734 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
735 the self-tests were still using deprecated key-generation functions so
736 these have been updated also.
739 *) Reorganise PKCS#7 code to separate the digest location functionality
740 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
741 New function PKCS7_set_digest() to set the digest type for PKCS#7
742 digestedData type. Add additional code to correctly generate the
743 digestedData type and add support for this type in PKCS7 initialization
747 *) New function PKCS7_set0_type_other() this initializes a PKCS7
748 structure of type "other".
751 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
752 sure the loop does correctly stop and breaking ("division by zero")
753 modulus operations are not performed. The (pre-generated) prime
754 table crypto/bn/bn_prime.h was already correct, but it could not be
755 re-generated on some platforms because of the "division by zero"
756 situation in the script.
757 [Ralf S. Engelschall]
759 *) Update support for ECC-based TLS ciphersuites according to
760 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
761 SHA-1 now is only used for "small" curves (where the
762 representation of a field element takes up to 24 bytes); for
763 larger curves, the field element resulting from ECDH is directly
764 used as premaster secret.
765 [Douglas Stebila (Sun Microsystems Laboratories)]
767 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
768 curve secp160r1 to the tests.
769 [Douglas Stebila (Sun Microsystems Laboratories)]
771 *) Add the possibility to load symbols globally with DSO.
772 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
774 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
775 control of the error stack.
778 *) Add support for STORE in ENGINE.
781 *) Add the STORE type. The intention is to provide a common interface
782 to certificate and key stores, be they simple file-based stores, or
783 HSM-type store, or LDAP stores, or...
784 NOTE: The code is currently UNTESTED and isn't really used anywhere.
787 *) Add a generic structure called OPENSSL_ITEM. This can be used to
788 pass a list of arguments to any function as well as provide a way
789 for a function to pass data back to the caller.
792 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
793 works like BUF_strdup() but can be used to duplicate a portion of
794 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
798 *) Add the function sk_find_ex() which works like sk_find(), but will
799 return an index to an element even if an exact match couldn't be
800 found. The index is guaranteed to point at the element where the
801 searched-for key would be inserted to preserve sorting order.
804 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
805 takes an extra flags argument for optional functionality. Currently,
806 the following flags are defined:
808 OBJ_BSEARCH_VALUE_ON_NOMATCH
809 This one gets OBJ_bsearch_ex() to return a pointer to the first
810 element where the comparing function returns a negative or zero
813 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
814 This one gets OBJ_bsearch_ex() to return a pointer to the first
815 element where the comparing function returns zero. This is useful
816 if there are more than one element where the comparing function
820 *) Make it possible to create self-signed certificates with 'openssl ca'
821 in such a way that the self-signed certificate becomes part of the
822 CA database and uses the same mechanisms for serial number generation
823 as all other certificate signing. The new flag '-selfsign' enables
824 this functionality. Adapt CA.sh and CA.pl.in.
827 *) Add functionality to check the public key of a certificate request
828 against a given private. This is useful to check that a certificate
829 request can be signed by that key (self-signing).
832 *) Make it possible to have multiple active certificates with the same
833 subject in the CA index file. This is done only if the keyword
834 'unique_subject' is set to 'no' in the main CA section (default
835 if 'CA_default') of the configuration file. The value is saved
836 with the database itself in a separate index attribute file,
837 named like the index file with '.attr' appended to the name.
840 *) Generate muti valued AVAs using '+' notation in config files for
844 *) Support for nameConstraints certificate extension.
847 *) Support for policyConstraints certificate extension.
850 *) Support for policyMappings certificate extension.
853 *) Make sure the default DSA_METHOD implementation only uses its
854 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
855 and change its own handlers to be NULL so as to remove unnecessary
856 indirection. This lets alternative implementations fallback to the
857 default implementation more easily.
860 *) Support for directoryName in GeneralName related extensions
864 *) Make it possible to link applications using Makefile.shared.
865 Make that possible even when linking against static libraries!
868 *) Support for single pass processing for S/MIME signing. This now
869 means that S/MIME signing can be done from a pipe, in addition
870 cleartext signing (multipart/signed type) is effectively streaming
871 and the signed data does not need to be all held in memory.
873 This is done with a new flag PKCS7_STREAM. When this flag is set
874 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
875 is done after the data is output (and digests calculated) in
879 *) Add full support for -rpath/-R, both in shared libraries and
880 applications, at least on the platforms where it's known how
884 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
885 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
886 will now compute a table of multiples of the generator that
887 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
888 faster (notably in the case of a single point multiplication,
890 [Nils Larsch, Bodo Moeller]
892 *) IPv6 support for certificate extensions. The various extensions
893 which use the IP:a.b.c.d can now take IPv6 addresses using the
894 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
898 *) Added an ENGINE that implements RSA by performing private key
899 exponentiations with the GMP library. The conversions to and from
900 GMP's mpz_t format aren't optimised nor are any montgomery forms
901 cached, and on x86 it appears OpenSSL's own performance has caught up.
902 However there are likely to be other architectures where GMP could
903 provide a boost. This ENGINE is not built in by default, but it can be
904 specified at Configure time and should be accompanied by the necessary
905 linker additions, eg;
906 ./config -DOPENSSL_USE_GMP -lgmp
909 *) "openssl engine" will not display ENGINE/DSO load failure errors when
910 testing availability of engines with "-t" - the old behaviour is
911 produced by increasing the feature's verbosity with "-tt".
914 *) ECDSA routines: under certain error conditions uninitialized BN objects
915 could be freed. Solution: make sure initialization is performed early
916 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
920 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
921 and DH_METHOD (eg. by ENGINE implementations) to override the normal
922 software implementations. For DSA and DH, parameter generation can
923 also be overriden by providing the appropriate method callbacks.
926 *) Change the "progress" mechanism used in key-generation and
927 primality testing to functions that take a new BN_GENCB pointer in
928 place of callback/argument pairs. The new API functions have "_ex"
929 postfixes and the older functions are reimplemented as wrappers for
930 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
931 declarations of the old functions to help (graceful) attempts to
932 migrate to the new functions. Also, the new key-generation API
933 functions operate on a caller-supplied key-structure and return
934 success/failure rather than returning a key or NULL - this is to
935 help make "keygen" another member function of RSA_METHOD etc.
937 Example for using the new callback interface:
939 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
943 BN_GENCB_set(&my_cb, my_callback, my_arg);
945 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
946 /* For the meaning of a, b in calls to my_callback(), see the
947 * documentation of the function that calls the callback.
948 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
949 * my_callback should return 1 if it wants BN_is_prime_ex()
950 * to continue, or 0 to stop.
955 *) Change the ZLIB compression method to be stateful, and make it
956 available to TLS with the number defined in
957 draft-ietf-tls-compression-04.txt.
960 *) Add the ASN.1 structures and functions for CertificatePair, which
961 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
963 CertificatePair ::= SEQUENCE {
964 forward [0] Certificate OPTIONAL,
965 reverse [1] Certificate OPTIONAL,
966 -- at least one of the pair shall be present -- }
968 Also implement the PEM functions to read and write certificate
969 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
971 This needed to be defined, mostly for the sake of the LDAP
972 attribute crossCertificatePair, but may prove useful elsewhere as
976 *) Make it possible to inhibit symlinking of shared libraries in
977 Makefile.shared, for Cygwin's sake.
980 *) Extend the BIGNUM API by creating a function
981 void BN_set_negative(BIGNUM *a, int neg);
982 and a macro that behave like
983 int BN_is_negative(const BIGNUM *a);
985 to avoid the need to access 'a->neg' directly in applications.
988 *) Implement fast modular reduction for pseudo-Mersenne primes
989 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
990 EC_GROUP_new_curve_GFp() will now automatically use this
992 [Nils Larsch <nla@trustcenter.de>]
994 *) Add new lock type (CRYPTO_LOCK_BN).
997 *) Change the ENGINE framework to automatically load engines
998 dynamically from specific directories unless they could be
999 found to already be built in or loaded. Move all the
1000 current engines except for the cryptodev one to a new
1002 The engines in engines/ are built as shared libraries if
1003 the "shared" options was given to ./Configure or ./config.
1004 Otherwise, they are inserted in libcrypto.a.
1005 /usr/local/ssl/engines is the default directory for dynamic
1006 engines, but that can be overriden at configure time through
1007 the usual use of --prefix and/or --openssldir, and at run
1008 time with the environment variable OPENSSL_ENGINES.
1009 [Geoff Thorpe and Richard Levitte]
1011 *) Add Makefile.shared, a helper makefile to build shared
1012 libraries. Addapt Makefile.org.
1015 *) Add version info to Win32 DLLs.
1016 [Peter 'Luna' Runestig" <peter@runestig.com>]
1018 *) Add new 'medium level' PKCS#12 API. Certificates and keys
1019 can be added using this API to created arbitrary PKCS#12
1020 files while avoiding the low level API.
1022 New options to PKCS12_create(), key or cert can be NULL and
1023 will then be omitted from the output file. The encryption
1024 algorithm NIDs can be set to -1 for no encryption, the mac
1025 iteration count can be set to 0 to omit the mac.
1027 Enhance pkcs12 utility by making the -nokeys and -nocerts
1028 options work when creating a PKCS#12 file. New option -nomac
1029 to omit the mac, NONE can be set for an encryption algorithm.
1030 New code is modified to use the enhanced PKCS12_create()
1031 instead of the low level API.
1034 *) Extend ASN1 encoder to support indefinite length constructed
1035 encoding. This can output sequences tags and octet strings in
1036 this form. Modify pk7_asn1.c to support indefinite length
1037 encoding. This is experimental and needs additional code to
1038 be useful, such as an ASN1 bio and some enhanced streaming
1041 Extend template encode functionality so that tagging is passed
1042 down to the template encoder.
1045 *) Let 'openssl req' fail if an argument to '-newkey' is not
1046 recognized instead of using RSA as a default.
1049 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
1050 As these are not official, they are not included in "ALL";
1051 the "ECCdraft" ciphersuite group alias can be used to select them.
1052 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
1054 *) Add ECDH engine support.
1055 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
1057 *) Add ECDH in new directory crypto/ecdh/.
1058 [Douglas Stebila (Sun Microsystems Laboratories)]
1060 *) Let BN_rand_range() abort with an error after 100 iterations
1061 without success (which indicates a broken PRNG).
1064 *) Change BN_mod_sqrt() so that it verifies that the input value
1065 is really the square of the return value. (Previously,
1066 BN_mod_sqrt would show GIGO behaviour.)
1069 *) Add named elliptic curves over binary fields from X9.62, SECG,
1070 and WAP/WTLS; add OIDs that were still missing.
1072 [Sheueling Chang Shantz and Douglas Stebila
1073 (Sun Microsystems Laboratories)]
1075 *) Extend the EC library for elliptic curves over binary fields
1076 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
1079 EC_GF2m_simple_method
1083 EC_GROUP_new_curve_GF2m
1084 EC_GROUP_set_curve_GF2m
1085 EC_GROUP_get_curve_GF2m
1086 EC_POINT_set_affine_coordinates_GF2m
1087 EC_POINT_get_affine_coordinates_GF2m
1088 EC_POINT_set_compressed_coordinates_GF2m
1090 Point compression for binary fields is disabled by default for
1091 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
1094 As binary polynomials are represented as BIGNUMs, various members
1095 of the EC_GROUP and EC_POINT data structures can be shared
1096 between the implementations for prime fields and binary fields;
1097 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
1098 are essentially identical to their ..._GFp counterparts.
1099 (For simplicity, the '..._GFp' prefix has been dropped from
1100 various internal method names.)
1102 An internal 'field_div' method (similar to 'field_mul' and
1103 'field_sqr') has been added; this is used only for binary fields.
1105 [Sheueling Chang Shantz and Douglas Stebila
1106 (Sun Microsystems Laboratories)]
1108 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
1109 through methods ('mul', 'precompute_mult').
1111 The generic implementations (now internally called 'ec_wNAF_mul'
1112 and 'ec_wNAF_precomputed_mult') remain the default if these
1113 methods are undefined.
1115 [Sheueling Chang Shantz and Douglas Stebila
1116 (Sun Microsystems Laboratories)]
1118 *) New function EC_GROUP_get_degree, which is defined through
1119 EC_METHOD. For curves over prime fields, this returns the bit
1120 length of the modulus.
1122 [Sheueling Chang Shantz and Douglas Stebila
1123 (Sun Microsystems Laboratories)]
1125 *) New functions EC_GROUP_dup, EC_POINT_dup.
1126 (These simply call ..._new and ..._copy).
1128 [Sheueling Chang Shantz and Douglas Stebila
1129 (Sun Microsystems Laboratories)]
1131 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
1132 Polynomials are represented as BIGNUMs (where the sign bit is not
1133 used) in the following functions [macros]:
1136 BN_GF2m_sub [= BN_GF2m_add]
1137 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
1138 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
1139 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
1141 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
1142 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
1143 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
1144 BN_GF2m_cmp [= BN_ucmp]
1146 (Note that only the 'mod' functions are actually for fields GF(2^m).
1147 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
1149 For some functions, an the irreducible polynomial defining a
1150 field can be given as an 'unsigned int[]' with strictly
1151 decreasing elements giving the indices of those bits that are set;
1152 i.e., p[] represents the polynomial
1153 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
1155 p[0] > p[1] > ... > p[k] = 0.
1156 This applies to the following functions:
1161 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
1162 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
1164 BN_GF2m_mod_sqrt_arr
1165 BN_GF2m_mod_solve_quad_arr
1169 Conversion can be performed by the following functions:
1174 bntest.c has additional tests for binary polynomial arithmetic.
1176 Two implementations for BN_GF2m_mod_div() are available.
1177 The default algorithm simply uses BN_GF2m_mod_inv() and
1178 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
1179 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
1180 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
1182 [Sheueling Chang Shantz and Douglas Stebila
1183 (Sun Microsystems Laboratories)]
1185 *) Add new error code 'ERR_R_DISABLED' that can be used when some
1186 functionality is disabled at compile-time.
1187 [Douglas Stebila <douglas.stebila@sun.com>]
1189 *) Change default behaviour of 'openssl asn1parse' so that more
1190 information is visible when viewing, e.g., a certificate:
1192 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
1193 mode the content of non-printable OCTET STRINGs is output in a
1194 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
1195 avoid the appearance of a printable string.
1196 [Nils Larsch <nla@trustcenter.de>]
1198 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
1200 EC_GROUP_set_asn1_flag()
1201 EC_GROUP_get_asn1_flag()
1202 EC_GROUP_set_point_conversion_form()
1203 EC_GROUP_get_point_conversion_form()
1204 These control ASN1 encoding details:
1205 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
1206 has been set to OPENSSL_EC_NAMED_CURVE.
1207 - Points are encoded in uncompressed form by default; options for
1208 asn1_for are as for point2oct, namely
1209 POINT_CONVERSION_COMPRESSED
1210 POINT_CONVERSION_UNCOMPRESSED
1211 POINT_CONVERSION_HYBRID
1213 Also add 'seed' and 'seed_len' members to EC_GROUP with access
1216 EC_GROUP_get0_seed()
1217 EC_GROUP_get_seed_len()
1218 This is used only for ASN1 purposes (so far).
1219 [Nils Larsch <nla@trustcenter.de>]
1221 *) Add 'field_type' member to EC_METHOD, which holds the NID
1222 of the appropriate field type OID. The new function
1223 EC_METHOD_get_field_type() returns this value.
1224 [Nils Larsch <nla@trustcenter.de>]
1229 EC_POINT_point2hex()
1230 EC_POINT_hex2point()
1231 providing useful interfaces to EC_POINT_point2oct() and
1232 EC_POINT_oct2point().
1233 [Nils Larsch <nla@trustcenter.de>]
1235 *) Change internals of the EC library so that the functions
1236 EC_GROUP_set_generator()
1237 EC_GROUP_get_generator()
1238 EC_GROUP_get_order()
1239 EC_GROUP_get_cofactor()
1240 are implemented directly in crypto/ec/ec_lib.c and not dispatched
1241 to methods, which would lead to unnecessary code duplication when
1242 adding different types of curves.
1243 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
1245 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
1246 arithmetic, and such that modified wNAFs are generated
1247 (which avoid length expansion in many cases).
1250 *) Add a function EC_GROUP_check_discriminant() (defined via
1251 EC_METHOD) that verifies that the curve discriminant is non-zero.
1253 Add a function EC_GROUP_check() that makes some sanity tests
1254 on a EC_GROUP, its generator and order. This includes
1255 EC_GROUP_check_discriminant().
1256 [Nils Larsch <nla@trustcenter.de>]
1258 *) Add ECDSA in new directory crypto/ecdsa/.
1260 Add applications 'openssl ecparam' and 'openssl ecdsa'
1261 (these are based on 'openssl dsaparam' and 'openssl dsa').
1263 ECDSA support is also included in various other files across the
1264 library. Most notably,
1265 - 'openssl req' now has a '-newkey ecdsa:file' option;
1266 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
1267 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
1268 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
1269 them suitable for ECDSA where domain parameters must be
1270 extracted before the specific public key;
1271 - ECDSA engine support has been added.
1272 [Nils Larsch <nla@trustcenter.de>]
1274 *) Include some named elliptic curves, and add OIDs from X9.62,
1275 SECG, and WAP/WTLS. Each curve can be obtained from the new
1277 EC_GROUP_new_by_curve_name(),
1278 and the list of available named curves can be obtained with
1279 EC_get_builtin_curves().
1280 Also add a 'curve_name' member to EC_GROUP objects, which can be
1282 EC_GROUP_set_curve_name()
1283 EC_GROUP_get_curve_name()
1284 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
1286 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1287 was actually never needed) and in BN_mul(). The removal in BN_mul()
1288 required a small change in bn_mul_part_recursive() and the addition
1289 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1290 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1291 bn_sub_words() and bn_add_words() except they take arrays with
1295 Changes between 0.9.7j and 0.9.7k [xx XXX xxxx]
1297 *) Change the Unix randomness entropy gathering to use poll() when
1298 possible instead of select(), since the latter has some
1299 undesirable limitations.
1300 [Darryl Miles via Richard Levitte and Bodo Moeller]
1302 *) Disable rogue ciphersuites:
1304 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
1305 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
1306 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
1308 The latter two were purportedly from
1309 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
1312 Also deactive the remaining ciphersuites from
1313 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
1314 unofficial, and the ID has long expired.
1317 *) Fix RSA blinding Heisenbug (problems sometimes occured on
1318 dual-core machines) and other potential thread-safety issues.
1321 Changes between 0.9.7i and 0.9.7j [04 May 2006]
1323 *) Adapt fipsld and the build system to link against the validated FIPS
1324 module in FIPS mode.
1327 *) Fixes for VC++ 2005 build under Windows.
1330 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
1331 from a Windows bash shell such as MSYS. It is autodetected from the
1332 "config" script when run from a VC++ environment. Modify standard VC++
1333 build to use fipscanister.o from the GNU make build.
1336 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
1338 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
1339 The value now differs depending on if you build for FIPS or not.
1340 BEWARE! A program linked with a shared FIPSed libcrypto can't be
1341 safely run with a non-FIPSed libcrypto, as it may crash because of
1342 the difference induced by this change.
1345 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
1347 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
1348 (part of SSL_OP_ALL). This option used to disable the
1349 countermeasure against man-in-the-middle protocol-version
1350 rollback in the SSL 2.0 server implementation, which is a bad
1351 idea. (CVE-2005-2969)
1353 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
1354 for Information Security, National Institute of Advanced Industrial
1355 Science and Technology [AIST], Japan)]
1357 *) Minimal support for X9.31 signatures and PSS padding modes. This is
1358 mainly for FIPS compliance and not fully integrated at this stage.
1361 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
1362 the exponentiation using a fixed-length exponent. (Otherwise,
1363 the information leaked through timing could expose the secret key
1364 after many signatures; cf. Bleichenbacher's attack on DSA with
1368 *) Make a new fixed-window mod_exp implementation the default for
1369 RSA, DSA, and DH private-key operations so that the sequence of
1370 squares and multiplies and the memory access pattern are
1371 independent of the particular secret key. This will mitigate
1372 cache-timing and potential related attacks.
1374 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
1375 and this is automatically used by BN_mod_exp_mont() if the new flag
1376 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
1377 will use this BN flag for private exponents unless the flag
1378 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
1379 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
1381 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
1383 *) Change the client implementation for SSLv23_method() and
1384 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
1385 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
1386 (Previously, the SSL 2.0 backwards compatible Client Hello
1387 message format would be used even with SSL_OP_NO_SSLv2.)
1390 *) Add support for smime-type MIME parameter in S/MIME messages which some
1394 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
1395 a threadsafe manner. Modify rsa code to use new function and add calls
1396 to dsa and dh code (which had race conditions before).
1399 *) Include the fixed error library code in the C error file definitions
1400 instead of fixing them up at runtime. This keeps the error code
1401 structures constant.
1404 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
1406 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
1409 *) Fixes for newer kerberos headers. NB: the casts are needed because
1410 the 'length' field is signed on one version and unsigned on another
1411 with no (?) obvious way to tell the difference, without these VC++
1412 complains. Also the "definition" of FAR (blank) is no longer included
1413 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
1414 some needed definitions.
1417 *) Undo Cygwin change.
1420 *) Added support for proxy certificates according to RFC 3820.
1421 Because they may be a security thread to unaware applications,
1422 they must be explicitely allowed in run-time. See
1423 docs/HOWTO/proxy_certificates.txt for further information.
1426 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
1428 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
1429 server and client random values. Previously
1430 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
1431 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
1433 This change has negligible security impact because:
1435 1. Server and client random values still have 24 bytes of pseudo random
1438 2. Server and client random values are sent in the clear in the initial
1441 3. The master secret is derived using the premaster secret (48 bytes in
1442 size for static RSA ciphersuites) as well as client server and random
1445 The OpenSSL team would like to thank the UK NISCC for bringing this issue
1448 [Stephen Henson, reported by UK NISCC]
1450 *) Use Windows randomness collection on Cygwin.
1453 *) Fix hang in EGD/PRNGD query when communication socket is closed
1454 prematurely by EGD/PRNGD.
1455 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
1457 *) Prompt for pass phrases when appropriate for PKCS12 input format.
1460 *) Back-port of selected performance improvements from development
1461 branch, as well as improved support for PowerPC platforms.
1464 *) Add lots of checks for memory allocation failure, error codes to indicate
1465 failure and freeing up memory if a failure occurs.
1466 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
1468 *) Add new -passin argument to dgst.
1471 *) Perform some character comparisons of different types in X509_NAME_cmp:
1472 this is needed for some certificates that reencode DNs into UTF8Strings
1473 (in violation of RFC3280) and can't or wont issue name rollover
1477 *) Make an explicit check during certificate validation to see that
1478 the CA setting in each certificate on the chain is correct. As a
1479 side effect always do the following basic checks on extensions,
1480 not just when there's an associated purpose to the check:
1482 - if there is an unhandled critical extension (unless the user
1483 has chosen to ignore this fault)
1484 - if the path length has been exceeded (if one is set at all)
1485 - that certain extensions fit the associated purpose (if one has
1489 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
1491 *) Avoid a race condition when CRLs are checked in a multi threaded
1492 environment. This would happen due to the reordering of the revoked
1493 entries during signature checking and serial number lookup. Now the
1494 encoding is cached and the serial number sort performed under a lock.
1495 Add new STACK function sk_is_sorted().
1498 *) Add Delta CRL to the extension code.
1501 *) Various fixes to s3_pkt.c so alerts are sent properly.
1502 [David Holmes <d.holmes@f5.com>]
1504 *) Reduce the chances of duplicate issuer name and serial numbers (in
1505 violation of RFC3280) using the OpenSSL certificate creation utilities.
1506 This is done by creating a random 64 bit value for the initial serial
1507 number when a serial number file is created or when a self signed
1508 certificate is created using 'openssl req -x509'. The initial serial
1509 number file is created using 'openssl x509 -next_serial' in CA.pl
1510 rather than being initialized to 1.
1513 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
1515 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
1516 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
1517 [Joe Orton, Steve Henson]
1519 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
1521 [Joe Orton, Steve Henson]
1523 *) Make it possible to have multiple active certificates with the same
1524 subject in the CA index file. This is done only if the keyword
1525 'unique_subject' is set to 'no' in the main CA section (default
1526 if 'CA_default') of the configuration file. The value is saved
1527 with the database itself in a separate index attribute file,
1528 named like the index file with '.attr' appended to the name.
1531 *) X509 verify fixes. Disable broken certificate workarounds when
1532 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
1533 keyUsage extension present. Don't accept CRLs with unhandled critical
1534 extensions: since verify currently doesn't process CRL extensions this
1535 rejects a CRL with *any* critical extensions. Add new verify error codes
1539 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
1540 A clarification of RFC2560 will require the use of OCTET STRINGs and
1541 some implementations cannot handle the current raw format. Since OpenSSL
1542 copies and compares OCSP nonces as opaque blobs without any attempt at
1543 parsing them this should not create any compatibility issues.
1546 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
1547 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
1548 this HMAC (and other) operations are several times slower than OpenSSL
1552 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
1553 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1555 *) Use the correct content when signing type "other".
1558 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
1560 *) Fix various bugs revealed by running the NISCC test suite:
1562 Stop out of bounds reads in the ASN1 code when presented with
1563 invalid tags (CVE-2003-0543 and CVE-2003-0544).
1565 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
1567 If verify callback ignores invalid public key errors don't try to check
1568 certificate signature with the NULL public key.
1572 *) New -ignore_err option in ocsp application to stop the server
1573 exiting on the first error in a request.
1576 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
1577 if the server requested one: as stated in TLS 1.0 and SSL 3.0
1581 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
1582 extra data after the compression methods not only for TLS 1.0
1583 but also for SSL 3.0 (as required by the specification).
1584 [Bodo Moeller; problem pointed out by Matthias Loepfe]
1586 *) Change X509_certificate_type() to mark the key as exported/exportable
1587 when it's 512 *bits* long, not 512 bytes.
1590 *) Change AES_cbc_encrypt() so it outputs exact multiple of
1591 blocks during encryption.
1594 *) Various fixes to base64 BIO and non blocking I/O. On write
1595 flushes were not handled properly if the BIO retried. On read
1596 data was not being buffered properly and had various logic bugs.
1597 This also affects blocking I/O when the data being decoded is a
1601 *) Various S/MIME bugfixes and compatibility changes:
1602 output correct application/pkcs7 MIME type if
1603 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
1604 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
1605 of files as .eml work). Correctly handle very long lines in MIME
1609 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
1611 *) Countermeasure against the Klima-Pokorny-Rosa extension of
1612 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
1613 a protocol version number mismatch like a decryption error
1614 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
1617 *) Turn on RSA blinding by default in the default implementation
1618 to avoid a timing attack. Applications that don't want it can call
1619 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
1620 They would be ill-advised to do so in most cases.
1621 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
1623 *) Change RSA blinding code so that it works when the PRNG is not
1624 seeded (in this case, the secret RSA exponent is abused as
1625 an unpredictable seed -- if it is not unpredictable, there
1626 is no point in blinding anyway). Make RSA blinding thread-safe
1627 by remembering the creator's thread ID in rsa->blinding and
1628 having all other threads use local one-time blinding factors
1629 (this requires more computation than sharing rsa->blinding, but
1630 avoids excessive locking; and if an RSA object is not shared
1631 between threads, blinding will still be very fast).
1634 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
1635 ENGINE as defaults for all supported algorithms irrespective of
1636 the 'flags' parameter. 'flags' is now honoured, so applications
1637 should make sure they are passing it correctly.
1640 *) Target "mingw" now allows native Windows code to be generated in
1641 the Cygwin environment as well as with the MinGW compiler.
1644 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
1646 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
1647 via timing by performing a MAC computation even if incorrrect
1648 block cipher padding has been found. This is a countermeasure
1649 against active attacks where the attacker has to distinguish
1650 between bad padding and a MAC verification error. (CVE-2003-0078)
1652 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
1653 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
1654 Martin Vuagnoux (EPFL, Ilion)]
1656 *) Make the no-err option work as intended. The intention with no-err
1657 is not to have the whole error stack handling routines removed from
1658 libcrypto, it's only intended to remove all the function name and
1659 reason texts, thereby removing some of the footprint that may not
1660 be interesting if those errors aren't displayed anyway.
1662 NOTE: it's still possible for any application or module to have it's
1663 own set of error texts inserted. The routines are there, just not
1664 used by default when no-err is given.
1667 *) Add support for FreeBSD on IA64.
1668 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
1670 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
1671 Kerberos function mit_des_cbc_cksum(). Before this change,
1672 the value returned by DES_cbc_cksum() was like the one from
1673 mit_des_cbc_cksum(), except the bytes were swapped.
1674 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
1676 *) Allow an application to disable the automatic SSL chain building.
1677 Before this a rather primitive chain build was always performed in
1678 ssl3_output_cert_chain(): an application had no way to send the
1679 correct chain if the automatic operation produced an incorrect result.
1681 Now the chain builder is disabled if either:
1683 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
1685 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
1687 The reasoning behind this is that an application would not want the
1688 auto chain building to take place if extra chain certificates are
1689 present and it might also want a means of sending no additional
1690 certificates (for example the chain has two certificates and the
1694 *) Add the possibility to build without the ENGINE framework.
1695 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1697 *) Under Win32 gmtime() can return NULL: check return value in
1698 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
1701 *) DSA routines: under certain error conditions uninitialized BN objects
1702 could be freed. Solution: make sure initialization is performed early
1703 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
1704 Nils Larsch <nla@trustcenter.de> via PR#459)
1707 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
1708 checked on reconnect on the client side, therefore session resumption
1709 could still fail with a "ssl session id is different" error. This
1710 behaviour is masked when SSL_OP_ALL is used due to
1711 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
1712 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1713 followup to PR #377.
1716 *) IA-32 assembler support enhancements: unified ELF targets, support
1717 for SCO/Caldera platforms, fix for Cygwin shared build.
1720 *) Add support for FreeBSD on sparc64. As a consequence, support for
1721 FreeBSD on non-x86 processors is separate from x86 processors on
1722 the config script, much like the NetBSD support.
1723 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
1725 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
1727 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
1730 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
1731 code (06) was taken as the first octet of the session ID and the last
1732 octet was ignored consequently. As a result SSLv2 client side session
1733 caching could not have worked due to the session ID mismatch between
1735 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1739 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
1740 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
1744 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
1745 seems that in spite of existing for more than a year, many application
1746 author have done nothing to provide the necessary callbacks, which
1747 means that this particular engine will not work properly anywhere.
1748 This is a very unfortunate situation which forces us, in the name
1749 of usability, to give the hw_ncipher.c a static lock, which is part
1751 NOTE: This is for the 0.9.7 series ONLY. This hack will never
1752 appear in 0.9.8 or later. We EXPECT application authors to have
1753 dealt properly with this when 0.9.8 is released (unless we actually
1754 make such changes in the libcrypto locking code that changes will
1755 have to be made anyway).
1758 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
1759 octets have been read, EOF or an error occurs. Without this change
1760 some truncated ASN1 structures will not produce an error.
1763 *) Disable Heimdal support, since it hasn't been fully implemented.
1764 Still give the possibility to force the use of Heimdal, but with
1765 warnings and a request that patches get sent to openssl-dev.
1768 *) Add the VC-CE target, introduce the WINCE sysname, and add
1769 INSTALL.WCE and appropriate conditionals to make it build.
1770 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1772 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
1773 cygssl-x.y.z.dll, where x, y and z are the major, minor and
1774 edit numbers of the version.
1775 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1777 *) Introduce safe string copy and catenation functions
1778 (BUF_strlcpy() and BUF_strlcat()).
1779 [Ben Laurie (CHATS) and Richard Levitte]
1781 *) Avoid using fixed-size buffers for one-line DNs.
1782 [Ben Laurie (CHATS)]
1784 *) Add BUF_MEM_grow_clean() to avoid information leakage when
1785 resizing buffers containing secrets, and use where appropriate.
1786 [Ben Laurie (CHATS)]
1788 *) Avoid using fixed size buffers for configuration file location.
1789 [Ben Laurie (CHATS)]
1791 *) Avoid filename truncation for various CA files.
1792 [Ben Laurie (CHATS)]
1794 *) Use sizeof in preference to magic numbers.
1795 [Ben Laurie (CHATS)]
1797 *) Avoid filename truncation in cert requests.
1798 [Ben Laurie (CHATS)]
1800 *) Add assertions to check for (supposedly impossible) buffer
1802 [Ben Laurie (CHATS)]
1804 *) Don't cache truncated DNS entries in the local cache (this could
1805 potentially lead to a spoofing attack).
1806 [Ben Laurie (CHATS)]
1808 *) Fix various buffers to be large enough for hex/decimal
1809 representations in a platform independent manner.
1810 [Ben Laurie (CHATS)]
1812 *) Add CRYPTO_realloc_clean() to avoid information leakage when
1813 resizing buffers containing secrets, and use where appropriate.
1814 [Ben Laurie (CHATS)]
1816 *) Add BIO_indent() to avoid much slightly worrying code to do
1818 [Ben Laurie (CHATS)]
1820 *) Convert sprintf()/BIO_puts() to BIO_printf().
1821 [Ben Laurie (CHATS)]
1823 *) buffer_gets() could terminate with the buffer only half
1825 [Ben Laurie (CHATS)]
1827 *) Add assertions to prevent user-supplied crypto functions from
1828 overflowing internal buffers by having large block sizes, etc.
1829 [Ben Laurie (CHATS)]
1831 *) New OPENSSL_assert() macro (similar to assert(), but enabled
1833 [Ben Laurie (CHATS)]
1835 *) Eliminate unused copy of key in RC4.
1836 [Ben Laurie (CHATS)]
1838 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
1839 [Ben Laurie (CHATS)]
1841 *) Fix off-by-one error in EGD path.
1842 [Ben Laurie (CHATS)]
1844 *) If RANDFILE path is too long, ignore instead of truncating.
1845 [Ben Laurie (CHATS)]
1847 *) Eliminate unused and incorrectly sized X.509 structure
1849 [Ben Laurie (CHATS)]
1851 *) Eliminate unused and dangerous function knumber().
1852 [Ben Laurie (CHATS)]
1854 *) Eliminate unused and dangerous structure, KSSL_ERR.
1855 [Ben Laurie (CHATS)]
1857 *) Protect against overlong session ID context length in an encoded
1858 session object. Since these are local, this does not appear to be
1860 [Ben Laurie (CHATS)]
1862 *) Change from security patch (see 0.9.6e below) that did not affect
1863 the 0.9.6 release series:
1865 Remote buffer overflow in SSL3 protocol - an attacker could
1866 supply an oversized master key in Kerberos-enabled versions.
1868 [Ben Laurie (CHATS)]
1870 *) Change the SSL kerb5 codes to match RFC 2712.
1873 *) Make -nameopt work fully for req and add -reqopt switch.
1874 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1876 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1877 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1879 *) Make sure tests can be performed even if the corresponding algorithms
1880 have been removed entirely. This was also the last step to make
1881 OpenSSL compilable with DJGPP under all reasonable conditions.
1882 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1884 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1885 to allow version independent disabling of normally unselected ciphers,
1886 which may be activated as a side-effect of selecting a single cipher.
1888 (E.g., cipher list string "RSA" enables ciphersuites that are left
1889 out of "ALL" because they do not provide symmetric encryption.
1890 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1891 [Lutz Jaenicke, Bodo Moeller]
1893 *) Add appropriate support for separate platform-dependent build
1894 directories. The recommended way to make a platform-dependent
1895 build directory is the following (tested on Linux), maybe with
1898 # Place yourself outside of the OpenSSL source tree. In
1899 # this example, the environment variable OPENSSL_SOURCE
1900 # is assumed to contain the absolute OpenSSL source directory.
1901 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1902 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1903 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1904 mkdir -p `dirname $F`
1905 ln -s $OPENSSL_SOURCE/$F $F
1908 To be absolutely sure not to disturb the source tree, a "make clean"
1909 is a good thing. If it isn't successfull, don't worry about it,
1910 it probably means the source directory is very clean.
1913 *) Make sure any ENGINE control commands make local copies of string
1914 pointers passed to them whenever necessary. Otherwise it is possible
1915 the caller may have overwritten (or deallocated) the original string
1916 data when a later ENGINE operation tries to use the stored values.
1917 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1919 *) Improve diagnostics in file reading and command-line digests.
1920 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1922 *) Add AES modes CFB and OFB to the object database. Correct an
1923 error in AES-CFB decryption.
1926 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1927 allows existing EVP_CIPHER_CTX structures to be reused after
1928 calling EVP_*Final(). This behaviour is used by encryption
1929 BIOs and some applications. This has the side effect that
1930 applications must explicitly clean up cipher contexts with
1931 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1934 *) Check the values of dna and dnb in bn_mul_recursive before calling
1935 bn_mul_comba (a non zero value means the a or b arrays do not contain
1936 n2 elements) and fallback to bn_mul_normal if either is not zero.
1939 *) Fix escaping of non-ASCII characters when using the -subj option
1940 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1943 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1944 form for "surname", serialNumber has no short form.
1945 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1946 therefore remove "mail" short name for "internet 7".
1947 The OID for unique identifiers in X509 certificates is
1948 x500UniqueIdentifier, not uniqueIdentifier.
1949 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1952 *) Add an "init" command to the ENGINE config module and auto initialize
1953 ENGINEs. Without any "init" command the ENGINE will be initialized
1954 after all ctrl commands have been executed on it. If init=1 the
1955 ENGINE is initailized at that point (ctrls before that point are run
1956 on the uninitialized ENGINE and after on the initialized one). If
1957 init=0 then the ENGINE will not be iniatialized at all.
1960 *) Fix the 'app_verify_callback' interface so that the user-defined
1961 argument is actually passed to the callback: In the
1962 SSL_CTX_set_cert_verify_callback() prototype, the callback
1963 declaration has been changed from
1966 int (*cb)(X509_STORE_CTX *,void *);
1967 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1968 i=s->ctx->app_verify_callback(&ctx)
1969 has been changed into
1970 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1972 To update applications using SSL_CTX_set_cert_verify_callback(),
1973 a dummy argument can be added to their callback functions.
1974 [D. K. Smetters <smetters@parc.xerox.com>]
1976 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1977 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1979 *) Add and OPENSSL_LOAD_CONF define which will cause
1980 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1981 This allows older applications to transparently support certain
1982 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1983 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1984 load the config file and OPENSSL_add_all_algorithms_conf() which will
1985 always load it have also been added.
1988 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1989 Adjust NIDs and EVP layer.
1990 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1992 *) Config modules support in openssl utility.
1994 Most commands now load modules from the config file,
1995 though in a few (such as version) this isn't done
1996 because it couldn't be used for anything.
1998 In the case of ca and req the config file used is
1999 the same as the utility itself: that is the -config
2000 command line option can be used to specify an
2004 *) Move default behaviour from OPENSSL_config(). If appname is NULL
2005 use "openssl_conf" if filename is NULL use default openssl config file.
2008 *) Add an argument to OPENSSL_config() to allow the use of an alternative
2009 config section name. Add a new flag to tolerate a missing config file
2010 and move code to CONF_modules_load_file().
2013 *) Support for crypto accelerator cards from Accelerated Encryption
2014 Processing, www.aep.ie. (Use engine 'aep')
2015 The support was copied from 0.9.6c [engine] and adapted/corrected
2016 to work with the new engine framework.
2017 [AEP Inc. and Richard Levitte]
2019 *) Support for SureWare crypto accelerator cards from Baltimore
2020 Technologies. (Use engine 'sureware')
2021 The support was copied from 0.9.6c [engine] and adapted
2022 to work with the new engine framework.
2025 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
2026 make the newer ENGINE framework commands for the CHIL engine work.
2027 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
2029 *) Make it possible to produce shared libraries on ReliantUNIX.
2030 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
2032 *) Add the configuration target debug-linux-ppro.
2033 Make 'openssl rsa' use the general key loading routines
2034 implemented in apps.c, and make those routines able to
2035 handle the key format FORMAT_NETSCAPE and the variant
2037 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
2039 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
2040 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
2042 *) Add -keyform to rsautl, and document -engine.
2043 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
2045 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
2046 BIO_R_NO_SUCH_FILE error code rather than the generic
2047 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
2050 *) Add new functions
2052 ERR_peek_last_error_line
2053 ERR_peek_last_error_line_data.
2054 These are similar to
2057 ERR_peek_error_line_data,
2058 but report on the latest error recorded rather than the first one
2059 still in the error queue.
2060 [Ben Laurie, Bodo Moeller]
2062 *) default_algorithms option in ENGINE config module. This allows things
2064 default_algorithms = ALL
2065 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
2068 *) Prelminary ENGINE config module.
2071 *) New experimental application configuration code.
2074 *) Change the AES code to follow the same name structure as all other
2075 symmetric ciphers, and behave the same way. Move everything to
2076 the directory crypto/aes, thereby obsoleting crypto/rijndael.
2077 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
2079 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
2080 [Ben Laurie and Theo de Raadt]
2082 *) Add option to output public keys in req command.
2083 [Massimiliano Pala madwolf@openca.org]
2085 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
2086 (up to about 10% better than before for P-192 and P-224).
2089 *) New functions/macros
2091 SSL_CTX_set_msg_callback(ctx, cb)
2092 SSL_CTX_set_msg_callback_arg(ctx, arg)
2093 SSL_set_msg_callback(ssl, cb)
2094 SSL_set_msg_callback_arg(ssl, arg)
2096 to request calling a callback function
2098 void cb(int write_p, int version, int content_type,
2099 const void *buf, size_t len, SSL *ssl, void *arg)
2101 whenever a protocol message has been completely received
2102 (write_p == 0) or sent (write_p == 1). Here 'version' is the
2103 protocol version according to which the SSL library interprets
2104 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
2105 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
2106 the content type as defined in the SSL 3.0/TLS 1.0 protocol
2107 specification (change_cipher_spec(20), alert(21), handshake(22)).
2108 'buf' and 'len' point to the actual message, 'ssl' to the
2109 SSL object, and 'arg' is the application-defined value set by
2110 SSL[_CTX]_set_msg_callback_arg().
2112 'openssl s_client' and 'openssl s_server' have new '-msg' options
2113 to enable a callback that displays all protocol messages.
2116 *) Change the shared library support so shared libraries are built as
2117 soon as the corresponding static library is finished, and thereby get
2118 openssl and the test programs linked against the shared library.
2119 This still only happens when the keyword "shard" has been given to
2120 the configuration scripts.
2122 NOTE: shared library support is still an experimental thing, and
2123 backward binary compatibility is still not guaranteed.
2124 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
2126 *) Add support for Subject Information Access extension.
2127 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
2129 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
2130 additional bytes when new memory had to be allocated, not just
2131 when reusing an existing buffer.
2134 *) New command line and configuration option 'utf8' for the req command.
2135 This allows field values to be specified as UTF8 strings.
2138 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
2139 runs for the former and machine-readable output for the latter.
2142 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
2143 of the e-mail address in the DN (i.e., it will go into a certificate
2144 extension only). The new configuration file option 'email_in_dn = no'
2145 has the same effect.
2146 [Massimiliano Pala madwolf@openca.org]
2148 *) Change all functions with names starting with des_ to be starting
2149 with DES_ instead. Add wrappers that are compatible with libdes,
2150 but are named _ossl_old_des_*. Finally, add macros that map the
2151 des_* symbols to the corresponding _ossl_old_des_* if libdes
2152 compatibility is desired. If OpenSSL 0.9.6c compatibility is
2153 desired, the des_* symbols will be mapped to DES_*, with one
2156 Since we provide two compatibility mappings, the user needs to
2157 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
2158 compatibility is desired. The default (i.e., when that macro
2159 isn't defined) is OpenSSL 0.9.6c compatibility.
2161 There are also macros that enable and disable the support of old
2162 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
2163 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
2164 are defined, the default will apply: to support the old des routines.
2166 In either case, one must include openssl/des.h to get the correct
2167 definitions. Do not try to just include openssl/des_old.h, that
2170 NOTE: This is a major break of an old API into a new one. Software
2171 authors are encouraged to switch to the DES_ style functions. Some
2172 time in the future, des_old.h and the libdes compatibility functions
2173 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
2174 default), and then completely removed.
2177 *) Test for certificates which contain unsupported critical extensions.
2178 If such a certificate is found during a verify operation it is
2179 rejected by default: this behaviour can be overridden by either
2180 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
2181 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
2182 X509_supported_extension() has also been added which returns 1 if a
2183 particular extension is supported.
2186 *) Modify the behaviour of EVP cipher functions in similar way to digests
2187 to retain compatibility with existing code.
2190 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
2191 compatibility with existing code. In particular the 'ctx' parameter does
2192 not have to be to be initialized before the call to EVP_DigestInit() and
2193 it is tidied up after a call to EVP_DigestFinal(). New function
2194 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
2195 EVP_MD_CTX_copy() changed to not require the destination to be
2196 initialized valid and new function EVP_MD_CTX_copy_ex() added which
2197 requires the destination to be valid.
2199 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
2200 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
2203 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
2204 so that complete 'Handshake' protocol structures are kept in memory
2205 instead of overwriting 'msg_type' and 'length' with 'body' data.
2208 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
2209 [Massimo Santin via Richard Levitte]
2211 *) Major restructuring to the underlying ENGINE code. This includes
2212 reduction of linker bloat, separation of pure "ENGINE" manipulation
2213 (initialisation, etc) from functionality dealing with implementations
2214 of specific crypto iterfaces. This change also introduces integrated
2215 support for symmetric ciphers and digest implementations - so ENGINEs
2216 can now accelerate these by providing EVP_CIPHER and EVP_MD
2217 implementations of their own. This is detailed in crypto/engine/README
2218 as it couldn't be adequately described here. However, there are a few
2219 API changes worth noting - some RSA, DSA, DH, and RAND functions that
2220 were changed in the original introduction of ENGINE code have now
2221 reverted back - the hooking from this code to ENGINE is now a good
2222 deal more passive and at run-time, operations deal directly with
2223 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
2224 dereferencing through an ENGINE pointer any more. Also, the ENGINE
2225 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
2226 they were not being used by the framework as there is no concept of a
2227 BIGNUM_METHOD and they could not be generalised to the new
2228 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
2229 ENGINE_cpy() has been removed as it cannot be consistently defined in
2233 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
2236 *) Change mkdef.pl to sort symbols that get the same entry number,
2237 and make sure the automatically generated functions ERR_load_*
2238 become part of libeay.num as well.
2241 *) New function SSL_renegotiate_pending(). This returns true once
2242 renegotiation has been requested (either SSL_renegotiate() call
2243 or HelloRequest/ClientHello receveived from the peer) and becomes
2244 false once a handshake has been completed.
2245 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
2246 sends a HelloRequest, but does not ensure that a handshake takes
2247 place. SSL_renegotiate_pending() is useful for checking if the
2248 client has followed the request.)
2251 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
2252 By default, clients may request session resumption even during
2253 renegotiation (if session ID contexts permit); with this option,
2254 session resumption is possible only in the first handshake.
2256 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
2257 more bits available for options that should not be part of
2258 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
2261 *) Add some demos for certificate and certificate request creation.
2264 *) Make maximum certificate chain size accepted from the peer application
2265 settable (SSL*_get/set_max_cert_list()), as proposed by
2266 "Douglas E. Engert" <deengert@anl.gov>.
2269 *) Add support for shared libraries for Unixware-7
2270 (Boyd Lynn Gerber <gerberb@zenez.com>).
2273 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
2274 be done prior to destruction. Use this to unload error strings from
2275 ENGINEs that load their own error strings. NB: This adds two new API
2276 functions to "get" and "set" this destroy handler in an ENGINE.
2279 *) Alter all existing ENGINE implementations (except "openssl" and
2280 "openbsd") to dynamically instantiate their own error strings. This
2281 makes them more flexible to be built both as statically-linked ENGINEs
2282 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
2283 Also, add stub code to each that makes building them as self-contained
2284 shared-libraries easier (see README.ENGINE).
2287 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
2288 implementations into applications that are completely implemented in
2289 self-contained shared-libraries. The "dynamic" ENGINE exposes control
2290 commands that can be used to configure what shared-library to load and
2291 to control aspects of the way it is handled. Also, made an update to
2292 the README.ENGINE file that brings its information up-to-date and
2293 provides some information and instructions on the "dynamic" ENGINE
2294 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
2297 *) Make it possible to unload ranges of ERR strings with a new
2298 "ERR_unload_strings" function.
2301 *) Add a copy() function to EVP_MD.
2304 *) Make EVP_MD routines take a context pointer instead of just the
2305 md_data void pointer.
2308 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
2309 that the digest can only process a single chunk of data
2310 (typically because it is provided by a piece of
2311 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
2312 is only going to provide a single chunk of data, and hence the
2313 framework needn't accumulate the data for oneshot drivers.
2316 *) As with "ERR", make it possible to replace the underlying "ex_data"
2317 functions. This change also alters the storage and management of global
2318 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
2319 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
2320 index counters. The API functions that use this state have been changed
2321 to take a "class_index" rather than pointers to the class's local STACK
2322 and counter, and there is now an API function to dynamically create new
2323 classes. This centralisation allows us to (a) plug a lot of the
2324 thread-safety problems that existed, and (b) makes it possible to clean
2325 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
2326 such data would previously have always leaked in application code and
2327 workarounds were in place to make the memory debugging turn a blind eye
2328 to it. Application code that doesn't use this new function will still
2329 leak as before, but their memory debugging output will announce it now
2330 rather than letting it slide.
2332 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
2333 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
2334 has a return value to indicate success or failure.
2337 *) Make it possible to replace the underlying "ERR" functions such that the
2338 global state (2 LHASH tables and 2 locks) is only used by the "default"
2339 implementation. This change also adds two functions to "get" and "set"
2340 the implementation prior to it being automatically set the first time
2341 any other ERR function takes place. Ie. an application can call "get",
2342 pass the return value to a module it has just loaded, and that module
2343 can call its own "set" function using that value. This means the
2344 module's "ERR" operations will use (and modify) the error state in the
2345 application and not in its own statically linked copy of OpenSSL code.
2348 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2349 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
2350 the operation, and provides a more encapsulated way for external code
2351 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
2352 to use these functions rather than manually incrementing the counts.
2354 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2357 *) Add EVP test program.
2360 *) Add symmetric cipher support to ENGINE. Expect the API to change!
2363 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
2364 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
2365 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
2366 These allow a CRL to be built without having to access X509_CRL fields
2367 directly. Modify 'ca' application to use new functions.
2370 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
2371 bug workarounds. Rollback attack detection is a security feature.
2372 The problem will only arise on OpenSSL servers when TLSv1 is not
2373 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
2374 Software authors not wanting to support TLSv1 will have special reasons
2375 for their choice and can explicitly enable this option.
2376 [Bodo Moeller, Lutz Jaenicke]
2378 *) Rationalise EVP so it can be extended: don't include a union of
2379 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
2380 (similar to those existing for EVP_CIPHER_CTX).
2385 EVP_MD_CTX_init(&md); /* new function call */
2386 EVP_DigestInit(&md, EVP_sha1());
2387 EVP_DigestUpdate(&md, in, len);
2388 EVP_DigestFinal(&md, out, NULL);
2389 EVP_MD_CTX_cleanup(&md); /* new function call */
2393 *) Make DES key schedule conform to the usual scheme, as well as
2394 correcting its structure. This means that calls to DES functions
2395 now have to pass a pointer to a des_key_schedule instead of a
2396 plain des_key_schedule (which was actually always a pointer
2399 des_key_schedule ks;
2401 des_set_key_checked(..., &ks);
2402 des_ncbc_encrypt(..., &ks, ...);
2404 (Note that a later change renames 'des_...' into 'DES_...'.)
2407 *) Initial reduction of linker bloat: the use of some functions, such as
2408 PEM causes large amounts of unused functions to be linked in due to
2409 poor organisation. For example pem_all.c contains every PEM function
2410 which has a knock on effect of linking in large amounts of (unused)
2411 ASN1 code. Grouping together similar functions and splitting unrelated
2412 functions prevents this.
2415 *) Cleanup of EVP macros.
2418 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2419 correct _ecb suffix.
2422 *) Add initial OCSP responder support to ocsp application. The
2423 revocation information is handled using the text based index
2424 use by the ca application. The responder can either handle
2425 requests generated internally, supplied in files (for example
2426 via a CGI script) or using an internal minimal server.
2429 *) Add configuration choices to get zlib compression for TLS.
2432 *) Changes to Kerberos SSL for RFC 2712 compliance:
2433 1. Implemented real KerberosWrapper, instead of just using
2434 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2435 2. Implemented optional authenticator field of KerberosWrapper.
2437 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
2438 and authenticator structs; see crypto/krb5/.
2440 Generalized Kerberos calls to support multiple Kerberos libraries.
2441 [Vern Staats <staatsvr@asc.hpc.mil>,
2442 Jeffrey Altman <jaltman@columbia.edu>
2443 via Richard Levitte]
2445 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
2446 already does with RSA. testdsa.h now has 'priv_key/pub_key'
2447 values for each of the key sizes rather than having just
2448 parameters (and 'speed' generating keys each time).
2451 *) Speed up EVP routines.
2454 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
2455 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
2456 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
2457 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
2459 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
2460 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
2461 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
2464 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
2466 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
2469 *) Added the OS2-EMX target.
2470 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
2472 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
2473 to support NCONF routines in extension code. New function CONF_set_nconf()
2474 to allow functions which take an NCONF to also handle the old LHASH
2475 structure: this means that the old CONF compatible routines can be
2476 retained (in particular wrt extensions) without having to duplicate the
2477 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
2480 *) Enhance the general user interface with mechanisms for inner control
2481 and with possibilities to have yes/no kind of prompts.
2484 *) Change all calls to low level digest routines in the library and
2485 applications to use EVP. Add missing calls to HMAC_cleanup() and
2486 don't assume HMAC_CTX can be copied using memcpy().
2487 [Verdon Walker <VWalker@novell.com>, Steve Henson]
2489 *) Add the possibility to control engines through control names but with
2490 arbitrary arguments instead of just a string.
2491 Change the key loaders to take a UI_METHOD instead of a callback
2492 function pointer. NOTE: this breaks binary compatibility with earlier
2493 versions of OpenSSL [engine].
2494 Adapt the nCipher code for these new conditions and add a card insertion
2498 *) Enhance the general user interface with mechanisms to better support
2499 dialog box interfaces, application-defined prompts, the possibility
2500 to use defaults (for example default passwords from somewhere else)
2501 and interrupts/cancellations.
2504 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
2505 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
2508 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2509 tidy up some unnecessarily weird code in 'sk_new()').
2510 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
2512 *) Change the key loading routines for ENGINEs to use the same kind
2513 callback (pem_password_cb) as all other routines that need this
2517 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
2518 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
2519 than this minimum value is recommended.
2522 *) New random seeder for OpenVMS, using the system process statistics
2523 that are easily reachable.
2526 *) Windows apparently can't transparently handle global
2527 variables defined in DLLs. Initialisations such as:
2529 const ASN1_ITEM *it = &ASN1_INTEGER_it;
2531 wont compile. This is used by the any applications that need to
2532 declare their own ASN1 modules. This was fixed by adding the option
2533 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
2534 needed for static libraries under Win32.
2537 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
2538 setting of purpose and trust fields. New X509_STORE trust and
2539 purpose functions and tidy up setting in other SSL functions.
2542 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
2543 structure. These are inherited by X509_STORE_CTX when it is
2544 initialised. This allows various defaults to be set in the
2545 X509_STORE structure (such as flags for CRL checking and custom
2546 purpose or trust settings) for functions which only use X509_STORE_CTX
2547 internally such as S/MIME.
2549 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
2550 trust settings if they are not set in X509_STORE. This allows X509_STORE
2551 purposes and trust (in S/MIME for example) to override any set by default.
2553 Add command line options for CRL checking to smime, s_client and s_server
2557 *) Initial CRL based revocation checking. If the CRL checking flag(s)
2558 are set then the CRL is looked up in the X509_STORE structure and
2559 its validity and signature checked, then if the certificate is found
2560 in the CRL the verify fails with a revoked error.
2562 Various new CRL related callbacks added to X509_STORE_CTX structure.
2564 Command line options added to 'verify' application to support this.
2566 This needs some additional work, such as being able to handle multiple
2567 CRLs with different times, extension based lookup (rather than just
2568 by subject name) and ultimately more complete V2 CRL extension
2572 *) Add a general user interface API (crypto/ui/). This is designed
2573 to replace things like des_read_password and friends (backward
2574 compatibility functions using this new API are provided).
2575 The purpose is to remove prompting functions from the DES code
2576 section as well as provide for prompting through dialog boxes in
2577 a window system and the like.
2580 *) Add "ex_data" support to ENGINE so implementations can add state at a
2581 per-structure level rather than having to store it globally.
2584 *) Make it possible for ENGINE structures to be copied when retrieved by
2585 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
2586 This causes the "original" ENGINE structure to act like a template,
2587 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
2588 operational state can be localised to each ENGINE structure, despite the
2589 fact they all share the same "methods". New ENGINE structures returned in
2590 this case have no functional references and the return value is the single
2591 structural reference. This matches the single structural reference returned
2592 by ENGINE_by_id() normally, when it is incremented on the pre-existing
2596 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
2597 needs to match any other type at all we need to manually clear the
2601 *) Changes to the "openssl engine" utility to include;
2602 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
2603 about an ENGINE's available control commands.
2604 - executing control commands from command line arguments using the
2605 '-pre' and '-post' switches. '-post' is only used if '-t' is
2606 specified and the ENGINE is successfully initialised. The syntax for
2607 the individual commands are colon-separated, for example;
2608 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
2611 *) New dynamic control command support for ENGINEs. ENGINEs can now
2612 declare their own commands (numbers), names (strings), descriptions,
2613 and input types for run-time discovery by calling applications. A
2614 subset of these commands are implicitly classed as "executable"
2615 depending on their input type, and only these can be invoked through
2616 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
2617 can be based on user input, config files, etc). The distinction is
2618 that "executable" commands cannot return anything other than a boolean
2619 result and can only support numeric or string input, whereas some
2620 discoverable commands may only be for direct use through
2621 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
2622 pointers, or other custom uses. The "executable" commands are to
2623 support parameterisations of ENGINE behaviour that can be
2624 unambiguously defined by ENGINEs and used consistently across any
2625 OpenSSL-based application. Commands have been added to all the
2626 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
2627 control over shared-library paths without source code alterations.
2630 *) Changed all ENGINE implementations to dynamically allocate their
2631 ENGINEs rather than declaring them statically. Apart from this being
2632 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
2633 this also allows the implementations to compile without using the
2634 internal engine_int.h header.
2637 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
2638 'const' value. Any code that should be able to modify a RAND_METHOD
2639 should already have non-const pointers to it (ie. they should only
2640 modify their own ones).
2643 *) Made a variety of little tweaks to the ENGINE code.
2644 - "atalla" and "ubsec" string definitions were moved from header files
2645 to C code. "nuron" string definitions were placed in variables
2646 rather than hard-coded - allowing parameterisation of these values
2647 later on via ctrl() commands.
2648 - Removed unused "#if 0"'d code.
2649 - Fixed engine list iteration code so it uses ENGINE_free() to release
2650 structural references.
2651 - Constified the RAND_METHOD element of ENGINE structures.
2652 - Constified various get/set functions as appropriate and added
2653 missing functions (including a catch-all ENGINE_cpy that duplicates
2654 all ENGINE values onto a new ENGINE except reference counts/state).
2655 - Removed NULL parameter checks in get/set functions. Setting a method
2656 or function to NULL is a way of cancelling out a previously set
2657 value. Passing a NULL ENGINE parameter is just plain stupid anyway
2658 and doesn't justify the extra error symbols and code.
2659 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
2660 flags from engine_int.h to engine.h.
2661 - Changed prototypes for ENGINE handler functions (init(), finish(),
2662 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
2665 *) Implement binary inversion algorithm for BN_mod_inverse in addition
2666 to the algorithm using long division. The binary algorithm can be
2667 used only if the modulus is odd. On 32-bit systems, it is faster
2668 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
2669 roughly 5-15% for 256-bit moduli), so we use it only for moduli
2670 up to 450 bits. In 64-bit environments, the binary algorithm
2671 appears to be advantageous for much longer moduli; here we use it
2672 for moduli up to 2048 bits.
2675 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
2676 could not support the combine flag in choice fields.
2679 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
2680 extensions from a certificate request to the certificate.
2683 *) Allow multiple 'certopt' and 'nameopt' options to be separated
2684 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
2685 file: this allows the display of the certificate about to be
2686 signed to be customised, to allow certain fields to be included
2687 or excluded and extension details. The old system didn't display
2688 multicharacter strings properly, omitted fields not in the policy
2689 and couldn't display additional details such as extensions.
2692 *) Function EC_POINTs_mul for multiple scalar multiplication
2693 of an arbitrary number of elliptic curve points
2694 \sum scalars[i]*points[i],
2695 optionally including the generator defined for the EC_GROUP:
2696 scalar*generator + \sum scalars[i]*points[i].
2698 EC_POINT_mul is a simple wrapper function for the typical case
2699 that the point list has just one item (besides the optional
2703 *) First EC_METHODs for curves over GF(p):
2705 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
2706 operations and provides various method functions that can also
2707 operate with faster implementations of modular arithmetic.
2709 EC_GFp_mont_method() reuses most functions that are part of
2710 EC_GFp_simple_method, but uses Montgomery arithmetic.
2712 [Bodo Moeller; point addition and point doubling
2713 implementation directly derived from source code provided by
2714 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
2716 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
2717 crypto/ec/ec_lib.c):
2719 Curves are EC_GROUP objects (with an optional group generator)
2720 based on EC_METHODs that are built into the library.
2722 Points are EC_POINT objects based on EC_GROUP objects.
2724 Most of the framework would be able to handle curves over arbitrary
2725 finite fields, but as there are no obvious types for fields other
2726 than GF(p), some functions are limited to that for now.
2729 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
2730 that the file contains a complete HTTP response.
2733 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
2734 change the def and num file printf format specifier from "%-40sXXX"
2735 to "%-39s XXX". The latter will always guarantee a space after the
2736 field while the former will cause them to run together if the field
2737 is 40 of more characters long.
2740 *) Constify the cipher and digest 'method' functions and structures
2741 and modify related functions to take constant EVP_MD and EVP_CIPHER
2745 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
2746 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
2749 *) Modify EVP_Digest*() routines so they now return values. Although the
2750 internal software routines can never fail additional hardware versions
2754 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2756 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
2757 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
2760 ERR_R_NESTED_ASN1_ERROR
2762 ERR_R_MISSING_ASN1_EOS
2763 were 4 .. 9, conflicting with
2764 ERR_LIB_RSA (= ERR_R_RSA_LIB)
2766 ERR_LIB_PEM (= ERR_R_PEM_LIB).
2767 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
2769 Add new error code 'ERR_R_INTERNAL_ERROR'.
2772 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2776 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
2777 sets the subject name for a new request or supersedes the
2778 subject name in a given request. Formats that can be parsed are
2779 'CN=Some Name, OU=myOU, C=IT'
2781 'CN=Some Name/OU=myOU/C=IT'.
2783 Add options '-batch' and '-verbose' to 'openssl req'.
2784 [Massimiliano Pala <madwolf@hackmasters.net>]
2786 *) Introduce the possibility to access global variables through
2787 functions on platform were that's the best way to handle exporting
2788 global variables in shared libraries. To enable this functionality,
2789 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
2790 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
2791 is normally done by Configure or something similar).
2793 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
2794 in the source file (foo.c) like this:
2796 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
2797 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
2799 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
2800 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
2802 OPENSSL_DECLARE_GLOBAL(int,foo);
2803 #define foo OPENSSL_GLOBAL_REF(foo)
2804 OPENSSL_DECLARE_GLOBAL(double,bar);
2805 #define bar OPENSSL_GLOBAL_REF(bar)
2807 The #defines are very important, and therefore so is including the
2808 header file everywhere where the defined globals are used.
2810 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2811 of ASN.1 items, but that structure is a bit different.
2813 The largest change is in util/mkdef.pl which has been enhanced with
2814 better and easier to understand logic to choose which symbols should
2815 go into the Windows .def files as well as a number of fixes and code
2816 cleanup (among others, algorithm keywords are now sorted
2817 lexicographically to avoid constant rewrites).
2820 *) In BN_div() keep a copy of the sign of 'num' before writing the
2821 result to 'rm' because if rm==num the value will be overwritten
2822 and produce the wrong result if 'num' is negative: this caused
2823 problems with BN_mod() and BN_nnmod().
2826 *) Function OCSP_request_verify(). This checks the signature on an
2827 OCSP request and verifies the signer certificate. The signer
2828 certificate is just checked for a generic purpose and OCSP request
2832 *) Add OCSP_check_validity() function to check the validity of OCSP
2833 responses. OCSP responses are prepared in real time and may only
2834 be a few seconds old. Simply checking that the current time lies
2835 between thisUpdate and nextUpdate max reject otherwise valid responses
2836 caused by either OCSP responder or client clock inaccuracy. Instead
2837 we allow thisUpdate and nextUpdate to fall within a certain period of
2838 the current time. The age of the response can also optionally be
2839 checked. Two new options -validity_period and -status_age added to
2843 *) If signature or public key algorithm is unrecognized print out its
2844 OID rather that just UNKNOWN.
2847 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
2848 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
2849 ID to be generated from the issuer certificate alone which can then be
2850 passed to OCSP_id_issuer_cmp().
2853 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
2854 ASN1 modules to export functions returning ASN1_ITEM pointers
2855 instead of the ASN1_ITEM structures themselves. This adds several
2856 new macros which allow the underlying ASN1 function/structure to
2857 be accessed transparently. As a result code should not use ASN1_ITEM
2858 references directly (such as &X509_it) but instead use the relevant
2859 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
2860 use of the new ASN1 code on platforms where exporting structures
2861 is problematical (for example in shared libraries) but exporting
2862 functions returning pointers to structures is not.
2865 *) Add support for overriding the generation of SSL/TLS session IDs.
2866 These callbacks can be registered either in an SSL_CTX or per SSL.
2867 The purpose of this is to allow applications to control, if they wish,
2868 the arbitrary values chosen for use as session IDs, particularly as it
2869 can be useful for session caching in multiple-server environments. A
2870 command-line switch for testing this (and any client code that wishes
2871 to use such a feature) has been added to "s_server".
2872 [Geoff Thorpe, Lutz Jaenicke]
2874 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2875 of the form '#if defined(...) || defined(...) || ...' and
2876 '#if !defined(...) && !defined(...) && ...'. This also avoids
2877 the growing number of special cases it was previously handling.
2880 *) Make all configuration macros available for application by making
2881 sure they are available in opensslconf.h, by giving them names starting
2882 with "OPENSSL_" to avoid conflicts with other packages and by making
2883 sure e_os2.h will cover all platform-specific cases together with
2885 Additionally, it is now possible to define configuration/platform-
2886 specific names (called "system identities"). In the C code, these
2887 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2888 macro with the name beginning with "OPENSSL_SYS_", which is determined
2889 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2893 *) New option -set_serial to 'req' and 'x509' this allows the serial
2894 number to use to be specified on the command line. Previously self
2895 signed certificates were hard coded with serial number 0 and the
2896 CA options of 'x509' had to use a serial number in a file which was
2900 *) New options to 'ca' utility to support V2 CRL entry extensions.
2901 Currently CRL reason, invalidity date and hold instruction are
2902 supported. Add new CRL extensions to V3 code and some new objects.
2905 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2906 disable standard block padding (aka PKCS#5 padding) in the EVP
2907 API, which was previously mandatory. This means that the data is
2908 not padded in any way and so the total length much be a multiple
2909 of the block size, otherwise an error occurs.
2912 *) Initial (incomplete) OCSP SSL support.
2915 *) New function OCSP_parse_url(). This splits up a URL into its host,
2916 port and path components: primarily to parse OCSP URLs. New -url
2917 option to ocsp utility.
2920 *) New nonce behavior. The return value of OCSP_check_nonce() now
2921 reflects the various checks performed. Applications can decide
2922 whether to tolerate certain situations such as an absent nonce
2923 in a response when one was present in a request: the ocsp application
2924 just prints out a warning. New function OCSP_add1_basic_nonce()
2925 this is to allow responders to include a nonce in a response even if
2926 the request is nonce-less.
2929 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2930 skipped when using openssl x509 multiple times on a single input file,
2931 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2934 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2935 set string type: to handle setting ASN1_TIME structures. Fix ca
2936 utility to correctly initialize revocation date of CRLs.
2939 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2940 the clients preferred ciphersuites and rather use its own preferences.
2941 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2942 Internet Explorer by ensuring unchanged hash method during stepup.
2943 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2946 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2947 to aes and add a new 'exist' option to print out symbols that don't
2951 *) Additional options to ocsp utility to allow flags to be set and
2952 additional certificates supplied.
2955 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2956 OCSP client a number of certificate to only verify the response
2960 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2961 handle the new API. Currently only ECB, CBC modes supported. Add new
2964 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2965 Encryption Standard (AES) Ciphersuites for Transport Layer
2966 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2967 not enabled by default and were not part of the "ALL" ciphersuite
2968 alias because they were not yet official; they could be
2969 explicitly requested by specifying the "AESdraft" ciphersuite
2970 group alias. In the final release of OpenSSL 0.9.7, the group
2971 alias is called "AES" and is part of "ALL".)
2972 [Ben Laurie, Steve Henson, Bodo Moeller]
2974 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2975 request to response.
2978 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2979 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2980 extract information from a certificate request. OCSP_response_create()
2981 creates a response and optionally adds a basic response structure.
2982 OCSP_basic_add1_status() adds a complete single response to a basic
2983 response and returns the OCSP_SINGLERESP structure just added (to allow
2984 extensions to be included for example). OCSP_basic_add1_cert() adds a
2985 certificate to a basic response and OCSP_basic_sign() signs a basic
2986 response with various flags. New helper functions ASN1_TIME_check()
2987 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2988 (converts ASN1_TIME to GeneralizedTime).
2991 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2992 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2993 structure from a certificate. X509_pubkey_digest() digests the public_key
2994 contents: this is used in various key identifiers.
2997 *) Make sk_sort() tolerate a NULL argument.
2998 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
3000 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
3001 passed by the function are trusted implicitly. If any of them signed the
3002 response then it is assumed to be valid and is not verified.
3005 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
3006 to data. This was previously part of the PKCS7 ASN1 code. This
3007 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
3008 [Steve Henson, reported by Kenneth R. Robinette
3009 <support@securenetterm.com>]
3011 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
3012 routines: without these tracing memory leaks is very painful.
3013 Fix leaks in PKCS12 and PKCS7 routines.
3016 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
3017 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
3018 effectively meant GeneralizedTime would never be used. Now it
3019 is initialised to -1 but X509_time_adj() now has to check the value
3020 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
3021 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
3022 [Steve Henson, reported by Kenneth R. Robinette
3023 <support@securenetterm.com>]
3025 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
3026 result in a zero length in the ASN1_INTEGER structure which was
3027 not consistent with the structure when d2i_ASN1_INTEGER() was used
3028 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
3029 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
3030 where it did not print out a minus for negative ASN1_INTEGER.
3033 *) Add summary printout to ocsp utility. The various functions which
3034 convert status values to strings have been renamed to:
3035 OCSP_response_status_str(), OCSP_cert_status_str() and
3036 OCSP_crl_reason_str() and are no longer static. New options
3037 to verify nonce values and to disable verification. OCSP response
3038 printout format cleaned up.
3041 *) Add additional OCSP certificate checks. These are those specified
3042 in RFC2560. This consists of two separate checks: the CA of the
3043 certificate being checked must either be the OCSP signer certificate
3044 or the issuer of the OCSP signer certificate. In the latter case the
3045 OCSP signer certificate must contain the OCSP signing extended key
3046 usage. This check is performed by attempting to match the OCSP
3047 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
3048 in the OCSP_CERTID structures of the response.
3051 *) Initial OCSP certificate verification added to OCSP_basic_verify()
3052 and related routines. This uses the standard OpenSSL certificate
3053 verify routines to perform initial checks (just CA validity) and
3054 to obtain the certificate chain. Then additional checks will be
3055 performed on the chain. Currently the root CA is checked to see
3056 if it is explicitly trusted for OCSP signing. This is used to set
3057 a root CA as a global signing root: that is any certificate that
3058 chains to that CA is an acceptable OCSP signing certificate.
3061 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
3062 extensions from a separate configuration file.
3063 As when reading extensions from the main configuration file,
3064 the '-extensions ...' option may be used for specifying the
3066 [Massimiliano Pala <madwolf@comune.modena.it>]
3068 *) New OCSP utility. Allows OCSP requests to be generated or
3069 read. The request can be sent to a responder and the output
3070 parsed, outputed or printed in text form. Not complete yet:
3071 still needs to check the OCSP response validity.
3074 *) New subcommands for 'openssl ca':
3075 'openssl ca -status <serial>' prints the status of the cert with
3076 the given serial number (according to the index file).
3077 'openssl ca -updatedb' updates the expiry status of certificates
3079 [Massimiliano Pala <madwolf@comune.modena.it>]
3081 *) New '-newreq-nodes' command option to CA.pl. This is like
3082 '-newreq', but calls 'openssl req' with the '-nodes' option
3083 so that the resulting key is not encrypted.
3084 [Damien Miller <djm@mindrot.org>]
3086 *) New configuration for the GNU Hurd.
3087 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
3089 *) Initial code to implement OCSP basic response verify. This
3090 is currently incomplete. Currently just finds the signer's
3091 certificate and verifies the signature on the response.
3094 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
3095 value of OPENSSLDIR. This is available via the new '-d' option
3096 to 'openssl version', and is also included in 'openssl version -a'.
3099 *) Allowing defining memory allocation callbacks that will be given
3100 file name and line number information in additional arguments
3101 (a const char* and an int). The basic functionality remains, as
3102 well as the original possibility to just replace malloc(),
3103 realloc() and free() by functions that do not know about these
3104 additional arguments. To register and find out the current
3105 settings for extended allocation functions, the following
3106 functions are provided:
3108 CRYPTO_set_mem_ex_functions
3109 CRYPTO_set_locked_mem_ex_functions
3110 CRYPTO_get_mem_ex_functions
3111 CRYPTO_get_locked_mem_ex_functions
3113 These work the same way as CRYPTO_set_mem_functions and friends.
3114 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
3115 extended allocation function is enabled.
3116 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
3117 a conventional allocation function is enabled.
3118 [Richard Levitte, Bodo Moeller]
3120 *) Finish off removing the remaining LHASH function pointer casts.
3121 There should no longer be any prototype-casting required when using
3122 the LHASH abstraction, and any casts that remain are "bugs". See
3123 the callback types and macros at the head of lhash.h for details
3124 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
3127 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
3128 If /dev/[u]random devices are not available or do not return enough
3129 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
3131 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
3132 /etc/entropy will be queried once each in this sequence, quering stops
3133 when enough entropy was collected without querying more sockets.
3136 *) Change the Unix RAND_poll() variant to be able to poll several
3137 random devices, as specified by DEVRANDOM, until a sufficient amount
3138 of data has been collected. We spend at most 10 ms on each file
3139 (select timeout) and read in non-blocking mode. DEVRANDOM now
3140 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
3141 (previously it was just the string "/dev/urandom"), so on typical
3142 platforms the 10 ms delay will never occur.
3143 Also separate out the Unix variant to its own file, rand_unix.c.
3144 For VMS, there's a currently-empty rand_vms.c.
3147 *) Move OCSP client related routines to ocsp_cl.c. These
3148 provide utility functions which an application needing
3149 to issue a request to an OCSP responder and analyse the
3150 response will typically need: as opposed to those which an
3151 OCSP responder itself would need which will be added later.
3153 OCSP_request_sign() signs an OCSP request with an API similar
3154 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
3155 response. OCSP_response_get1_basic() extracts basic response
3156 from response. OCSP_resp_find_status(): finds and extracts status
3157 information from an OCSP_CERTID structure (which will be created
3158 when the request structure is built). These are built from lower
3159 level functions which work on OCSP_SINGLERESP structures but
3160 wont normally be used unless the application wishes to examine
3161 extensions in the OCSP response for example.
3163 Replace nonce routines with a pair of functions.
3164 OCSP_request_add1_nonce() adds a nonce value and optionally
3165 generates a random value. OCSP_check_nonce() checks the
3166 validity of the nonce in an OCSP response.
3169 *) Change function OCSP_request_add() to OCSP_request_add0_id().
3170 This doesn't copy the supplied OCSP_CERTID and avoids the
3171 need to free up the newly created id. Change return type
3172 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
3173 This can then be used to add extensions to the request.
3174 Deleted OCSP_request_new(), since most of its functionality
3175 is now in OCSP_REQUEST_new() (and the case insensitive name
3176 clash) apart from the ability to set the request name which
3177 will be added elsewhere.
3180 *) Update OCSP API. Remove obsolete extensions argument from
3181 various functions. Extensions are now handled using the new
3182 OCSP extension code. New simple OCSP HTTP function which
3183 can be used to send requests and parse the response.
3186 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
3187 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
3188 uses the special reorder version of SET OF to sort the attributes
3189 and reorder them to match the encoded order. This resolves a long
3190 standing problem: a verify on a PKCS7 structure just after signing
3191 it used to fail because the attribute order did not match the
3192 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
3193 it uses the received order. This is necessary to tolerate some broken
3194 software that does not order SET OF. This is handled by encoding
3195 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
3196 to produce the required SET OF.
3199 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
3200 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
3201 files to get correct declarations of the ASN.1 item variables.
3204 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
3205 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
3206 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
3207 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
3208 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
3209 ASN1_ITEM and no wrapper functions.
3212 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
3213 replace the old function pointer based I/O routines. Change most of
3214 the *_d2i_bio() and *_d2i_fp() functions to use these.
3217 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
3218 lines, recognice more "algorithms" that can be deselected, and make
3219 it complain about algorithm deselection that isn't recognised.
3222 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
3223 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
3224 to use new functions. Add NO_ASN1_OLD which can be set to remove
3225 some old style ASN1 functions: this can be used to determine if old
3226 code will still work when these eventually go away.
3229 *) New extension functions for OCSP structures, these follow the
3230 same conventions as certificates and CRLs.
3233 *) New function X509V3_add1_i2d(). This automatically encodes and
3234 adds an extension. Its behaviour can be customised with various
3235 flags to append, replace or delete. Various wrappers added for
3236 certifcates and CRLs.
3239 *) Fix to avoid calling the underlying ASN1 print routine when
3240 an extension cannot be parsed. Correct a typo in the
3241 OCSP_SERVICELOC extension. Tidy up print OCSP format.
3244 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
3245 entries for variables.
3248 *) Add functionality to apps/openssl.c for detecting locking
3249 problems: As the program is single-threaded, all we have
3250 to do is register a locking callback using an array for
3251 storing which locks are currently held by the program.
3254 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
3255 SSL_get_ex_data_X509_STORE_idx(), which is used in
3256 ssl_verify_cert_chain() and thus can be called at any time
3257 during TLS/SSL handshakes so that thread-safety is essential.
3258 Unfortunately, the ex_data design is not at all suited
3259 for multi-threaded use, so it probably should be abolished.
3262 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
3263 [Broadcom, tweaked and integrated by Geoff Thorpe]
3265 *) Move common extension printing code to new function
3266 X509V3_print_extensions(). Reorganise OCSP print routines and
3267 implement some needed OCSP ASN1 functions. Add OCSP extensions.
3270 *) New function X509_signature_print() to remove duplication in some
3274 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
3275 set (this was treated exactly the same as SET OF previously). This
3276 is used to reorder the STACK representing the structure to match the
3277 encoding. This will be used to get round a problem where a PKCS7
3278 structure which was signed could not be verified because the STACK
3279 order did not reflect the encoded order.
3282 *) Reimplement the OCSP ASN1 module using the new code.
3285 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
3286 for its ASN1 operations. The old style function pointers still exist
3287 for now but they will eventually go away.
3290 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
3291 completely replaces the old ASN1 functionality with a table driven
3292 encoder and decoder which interprets an ASN1_ITEM structure describing
3293 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
3294 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
3295 has also been converted to the new form.
3298 *) Change BN_mod_exp_recp so that negative moduli are tolerated
3299 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
3300 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
3301 for negative moduli.
3304 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
3305 of not touching the result's sign bit.
3308 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
3312 *) Changed the LHASH code to use prototypes for callbacks, and created
3313 macros to declare and implement thin (optionally static) functions
3314 that provide type-safety and avoid function pointer casting for the
3315 type-specific callbacks.
3318 *) Added Kerberos Cipher Suites to be used with TLS, as written in
3320 [Veers Staats <staatsvr@asc.hpc.mil>,
3321 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
3323 *) Reformat the FAQ so the different questions and answers can be divided
3324 in sections depending on the subject.
3327 *) Have the zlib compression code load ZLIB.DLL dynamically under
3331 *) New function BN_mod_sqrt for computing square roots modulo a prime
3332 (using the probabilistic Tonelli-Shanks algorithm unless
3333 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
3334 be handled deterministically).
3335 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3337 *) Make BN_mod_inverse faster by explicitly handling small quotients
3338 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
3339 512 bits], about 30% for larger ones [1024 or 2048 bits].)
3342 *) New function BN_kronecker.
3345 *) Fix BN_gcd so that it works on negative inputs; the result is
3346 positive unless both parameters are zero.
3347 Previously something reasonably close to an infinite loop was
3348 possible because numbers could be growing instead of shrinking
3349 in the implementation of Euclid's algorithm.
3352 *) Fix BN_is_word() and BN_is_one() macros to take into account the
3353 sign of the number in question.
3355 Fix BN_is_word(a,w) to work correctly for w == 0.
3357 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
3358 because its test if the absolute value of 'a' equals 'w'.
3359 Note that BN_abs_is_word does *not* handle w == 0 reliably;
3360 it exists mostly for use in the implementations of BN_is_zero(),
3361 BN_is_one(), and BN_is_word().
3364 *) New function BN_swap.
3367 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
3368 the exponentiation functions are more likely to produce reasonable
3369 results on negative inputs.
3372 *) Change BN_mod_mul so that the result is always non-negative.
3373 Previously, it could be negative if one of the factors was negative;
3374 I don't think anyone really wanted that behaviour.
3377 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
3378 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
3379 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
3380 and add new functions:
3389 BN_mod_lshift1_quick
3393 These functions always generate non-negative results.
3395 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
3396 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
3398 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
3399 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
3400 be reduced modulo m.
3401 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3404 The following entry accidentily appeared in the CHANGES file
3405 distributed with OpenSSL 0.9.7. The modifications described in
3406 it do *not* apply to OpenSSL 0.9.7.
3408 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3409 was actually never needed) and in BN_mul(). The removal in BN_mul()
3410 required a small change in bn_mul_part_recursive() and the addition
3411 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3412 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3413 bn_sub_words() and bn_add_words() except they take arrays with
3418 *) In 'openssl passwd', verify passwords read from the terminal
3419 unless the '-salt' option is used (which usually means that
3420 verification would just waste user's time since the resulting
3421 hash is going to be compared with some given password hash)
3422 or the new '-noverify' option is used.
3424 This is an incompatible change, but it does not affect
3425 non-interactive use of 'openssl passwd' (passwords on the command
3426 line, '-stdin' option, '-in ...' option) and thus should not
3430 *) Remove all references to RSAref, since there's no more need for it.
3433 *) Make DSO load along a path given through an environment variable
3434 (SHLIB_PATH) with shl_load().
3437 *) Constify the ENGINE code as a result of BIGNUM constification.
3438 Also constify the RSA code and most things related to it. In a
3439 few places, most notable in the depth of the ASN.1 code, ugly
3440 casts back to non-const were required (to be solved at a later
3444 *) Make it so the openssl application has all engines loaded by default.
3447 *) Constify the BIGNUM routines a little more.
3450 *) Add the following functions:
3452 ENGINE_load_cswift()
3454 ENGINE_load_atalla()
3456 ENGINE_load_builtin_engines()
3458 That way, an application can itself choose if external engines that
3459 are built-in in OpenSSL shall ever be used or not. The benefit is
3460 that applications won't have to be linked with libdl or other dso
3461 libraries unless it's really needed.
3463 Changed 'openssl engine' to load all engines on demand.
3464 Changed the engine header files to avoid the duplication of some
3465 declarations (they differed!).
3468 *) 'openssl engine' can now list capabilities.
3471 *) Better error reporting in 'openssl engine'.
3474 *) Never call load_dh_param(NULL) in s_server.
3477 *) Add engine application. It can currently list engines by name and
3478 identity, and test if they are actually available.
3481 *) Improve RPM specification file by forcing symbolic linking and making
3482 sure the installed documentation is also owned by root.root.
3483 [Damien Miller <djm@mindrot.org>]
3485 *) Give the OpenSSL applications more possibilities to make use of
3486 keys (public as well as private) handled by engines.
3489 *) Add OCSP code that comes from CertCo.
3492 *) Add VMS support for the Rijndael code.
3495 *) Added untested support for Nuron crypto accelerator.
3498 *) Add support for external cryptographic devices. This code was
3499 previously distributed separately as the "engine" branch.
3500 [Geoff Thorpe, Richard Levitte]
3502 *) Rework the filename-translation in the DSO code. It is now possible to
3503 have far greater control over how a "name" is turned into a filename
3504 depending on the operating environment and any oddities about the
3505 different shared library filenames on each system.
3508 *) Support threads on FreeBSD-elf in Configure.
3511 *) Fix for SHA1 assembly problem with MASM: it produces
3512 warnings about corrupt line number information when assembling
3513 with debugging information. This is caused by the overlapping
3515 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
3518 NCONF_get_number() has no error checking at all. As a replacement,
3519 NCONF_get_number_e() is defined (_e for "error checking") and is
3520 promoted strongly. The old NCONF_get_number is kept around for
3521 binary backward compatibility.
3522 Make it possible for methods to load from something other than a BIO,
3523 by providing a function pointer that is given a name instead of a BIO.
3524 For example, this could be used to load configuration data from an
3528 *) Fix for non blocking accept BIOs. Added new I/O special reason
3529 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
3530 with non blocking I/O was not possible because no retry code was
3531 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
3535 *) Added the beginnings of Rijndael support.
3538 *) Fix for bug in DirectoryString mask setting. Add support for
3539 X509_NAME_print_ex() in 'req' and X509_print_ex() function
3540 to allow certificate printing to more controllable, additional
3541 'certopt' option to 'x509' to allow new printing options to be
3545 *) Clean old EAY MD5 hack from e_os.h.
3548 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
3550 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3551 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3552 [Joe Orton, Steve Henson]
3554 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
3556 *) Fix additional bug revealed by the NISCC test suite:
3558 Stop bug triggering large recursion when presented with
3559 certain ASN.1 tags (CVE-2003-0851)
3562 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
3564 *) Fix various bugs revealed by running the NISCC test suite:
3566 Stop out of bounds reads in the ASN1 code when presented with
3567 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3569 If verify callback ignores invalid public key errors don't try to check
3570 certificate signature with the NULL public key.
3574 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3575 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3579 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3580 extra data after the compression methods not only for TLS 1.0
3581 but also for SSL 3.0 (as required by the specification).
3582 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3584 *) Change X509_certificate_type() to mark the key as exported/exportable
3585 when it's 512 *bits* long, not 512 bytes.
3588 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
3590 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3591 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3592 a protocol version number mismatch like a decryption error
3593 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3596 *) Turn on RSA blinding by default in the default implementation
3597 to avoid a timing attack. Applications that don't want it can call
3598 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3599 They would be ill-advised to do so in most cases.
3600 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3602 *) Change RSA blinding code so that it works when the PRNG is not
3603 seeded (in this case, the secret RSA exponent is abused as
3604 an unpredictable seed -- if it is not unpredictable, there
3605 is no point in blinding anyway). Make RSA blinding thread-safe
3606 by remembering the creator's thread ID in rsa->blinding and
3607 having all other threads use local one-time blinding factors
3608 (this requires more computation than sharing rsa->blinding, but
3609 avoids excessive locking; and if an RSA object is not shared
3610 between threads, blinding will still be very fast).
3613 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
3615 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3616 via timing by performing a MAC computation even if incorrrect
3617 block cipher padding has been found. This is a countermeasure
3618 against active attacks where the attacker has to distinguish
3619 between bad padding and a MAC verification error. (CVE-2003-0078)
3621 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3622 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3623 Martin Vuagnoux (EPFL, Ilion)]
3625 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
3627 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
3628 memory from it's contents. This is done with a counter that will
3629 place alternating values in each byte. This can be used to solve
3630 two issues: 1) the removal of calls to memset() by highly optimizing
3631 compilers, and 2) cleansing with other values than 0, since those can
3632 be read through on certain media, for example a swap space on disk.
3635 *) Bugfix: client side session caching did not work with external caching,
3636 because the session->cipher setting was not restored when reloading
3637 from the external cache. This problem was masked, when
3638 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
3639 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
3642 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
3643 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
3644 [Zeev Lieber <zeev-l@yahoo.com>]
3646 *) Undo an undocumented change introduced in 0.9.6e which caused
3647 repeated calls to OpenSSL_add_all_ciphers() and
3648 OpenSSL_add_all_digests() to be ignored, even after calling
3652 *) Change the default configuration reader to deal with last line not
3653 being properly terminated.
3656 *) Change X509_NAME_cmp() so it applies the special rules on handling
3657 DN values that are of type PrintableString, as well as RDNs of type
3658 emailAddress where the value has the type ia5String.
3659 [stefank@valicert.com via Richard Levitte]
3661 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
3662 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
3663 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
3664 the bitwise-OR of the two for use by the majority of applications
3665 wanting this behaviour, and update the docs. The documented
3666 behaviour and actual behaviour were inconsistent and had been
3667 changing anyway, so this is more a bug-fix than a behavioural
3669 [Geoff Thorpe, diagnosed by Nadav Har'El]
3671 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
3672 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
3675 *) Fix initialization code race conditions in
3676 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
3677 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
3678 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
3679 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
3680 ssl2_get_cipher_by_char(),
3681 ssl3_get_cipher_by_char().
3682 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
3684 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
3685 the cached sessions are flushed, as the remove_cb() might use ex_data
3686 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
3687 (see [openssl.org #212]).
3688 [Geoff Thorpe, Lutz Jaenicke]
3690 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
3691 length, instead of the encoding length to d2i_ASN1_OBJECT.
3694 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
3696 *) [In 0.9.6g-engine release:]
3697 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
3698 [Lynn Gazis <lgazis@rainbow.com>]
3700 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
3702 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
3703 and get fix the header length calculation.
3704 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
3705 Alon Kantor <alonk@checkpoint.com> (and others),
3708 *) Use proper error handling instead of 'assertions' in buffer
3709 overflow checks added in 0.9.6e. This prevents DoS (the
3710 assertions could call abort()).
3711 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
3713 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
3715 *) Add various sanity checks to asn1_get_length() to reject
3716 the ASN1 length bytes if they exceed sizeof(long), will appear
3717 negative or the content length exceeds the length of the
3719 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3721 *) Fix cipher selection routines: ciphers without encryption had no flags
3722 for the cipher strength set and where therefore not handled correctly
3723 by the selection routines (PR #130).
3726 *) Fix EVP_dsa_sha macro.
3730 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
3731 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
3732 that was added in OpenSSL 0.9.6d.
3734 As the countermeasure turned out to be incompatible with some
3735 broken SSL implementations, the new option is part of SSL_OP_ALL.
3736 SSL_OP_ALL is usually employed when compatibility with weird SSL
3737 implementations is desired (e.g. '-bugs' option to 's_client' and
3738 's_server'), so the new option is automatically set in many
3742 *) Changes in security patch:
3744 Changes marked "(CHATS)" were sponsored by the Defense Advanced
3745 Research Projects Agency (DARPA) and Air Force Research Laboratory,
3746 Air Force Materiel Command, USAF, under agreement number
3749 *) Add various sanity checks to asn1_get_length() to reject
3750 the ASN1 length bytes if they exceed sizeof(long), will appear
3751 negative or the content length exceeds the length of the
3752 supplied buffer. (CVE-2002-0659)
3753 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3755 *) Assertions for various potential buffer overflows, not known to
3757 [Ben Laurie (CHATS)]
3759 *) Various temporary buffers to hold ASCII versions of integers were
3760 too small for 64 bit platforms. (CVE-2002-0655)
3761 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
3763 *) Remote buffer overflow in SSL3 protocol - an attacker could
3764 supply an oversized session ID to a client. (CVE-2002-0656)
3765 [Ben Laurie (CHATS)]
3767 *) Remote buffer overflow in SSL2 protocol - an attacker could
3768 supply an oversized client master key. (CVE-2002-0656)
3769 [Ben Laurie (CHATS)]
3771 Changes between 0.9.6c and 0.9.6d [9 May 2002]
3773 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
3774 encoded as NULL) with id-dsa-with-sha1.
3775 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
3777 *) Check various X509_...() return values in apps/req.c.
3778 [Nils Larsch <nla@trustcenter.de>]
3780 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
3781 an end-of-file condition would erronously be flagged, when the CRLF
3782 was just at the end of a processed block. The bug was discovered when
3783 processing data through a buffering memory BIO handing the data to a
3784 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
3785 <ptsekov@syntrex.com> and Nedelcho Stanev.
3788 *) Implement a countermeasure against a vulnerability recently found
3789 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
3790 before application data chunks to avoid the use of known IVs
3791 with data potentially chosen by the attacker.
3794 *) Fix length checks in ssl3_get_client_hello().
3797 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
3798 to prevent ssl3_read_internal() from incorrectly assuming that
3799 ssl3_read_bytes() found application data while handshake
3800 processing was enabled when in fact s->s3->in_read_app_data was
3801 merely automatically cleared during the initial handshake.
3802 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
3804 *) Fix object definitions for Private and Enterprise: they were not
3805 recognized in their shortname (=lowercase) representation. Extend
3806 obj_dat.pl to issue an error when using undefined keywords instead
3807 of silently ignoring the problem (Svenning Sorensen
3808 <sss@sss.dnsalias.net>).
3811 *) Fix DH_generate_parameters() so that it works for 'non-standard'
3812 generators, i.e. generators other than 2 and 5. (Previously, the
3813 code did not properly initialise the 'add' and 'rem' values to
3814 BN_generate_prime().)
3816 In the new general case, we do not insist that 'generator' is
3817 actually a primitive root: This requirement is rather pointless;
3818 a generator of the order-q subgroup is just as good, if not
3822 *) Map new X509 verification errors to alerts. Discovered and submitted by
3823 Tom Wu <tom@arcot.com>.
3826 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
3827 returning non-zero before the data has been completely received
3828 when using non-blocking I/O.
3829 [Bodo Moeller; problem pointed out by John Hughes]
3831 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
3832 [Ben Laurie, Lutz Jaenicke]
3834 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
3835 Yoram Zahavi <YoramZ@gilian.com>).
3838 *) Add information about CygWin 1.3 and on, and preserve proper
3839 configuration for the versions before that.
3840 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3842 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
3843 check whether we deal with a copy of a session and do not delete from
3844 the cache in this case. Problem reported by "Izhar Shoshani Levi"
3845 <izhar@checkpoint.com>.
3848 *) Do not store session data into the internal session cache, if it
3849 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
3850 flag is set). Proposed by Aslam <aslam@funk.com>.
3853 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
3857 *) [In 0.9.6d-engine release:]
3858 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3859 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3861 *) Add the configuration target linux-s390x.
3862 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
3864 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
3865 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
3866 variable as an indication that a ClientHello message has been
3867 received. As the flag value will be lost between multiple
3868 invocations of ssl3_accept when using non-blocking I/O, the
3869 function may not be aware that a handshake has actually taken
3870 place, thus preventing a new session from being added to the
3873 To avoid this problem, we now set s->new_session to 2 instead of
3874 using a local variable.
3875 [Lutz Jaenicke, Bodo Moeller]
3877 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
3878 if the SSL_R_LENGTH_MISMATCH error is detected.
3879 [Geoff Thorpe, Bodo Moeller]
3881 *) New 'shared_ldflag' column in Configure platform table.
3884 *) Fix EVP_CIPHER_mode macro.
3885 ["Dan S. Camper" <dan@bti.net>]
3887 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
3888 type, we must throw them away by setting rr->length to 0.
3889 [D P Chang <dpc@qualys.com>]
3891 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
3893 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
3894 <Dominikus.Scherkl@biodata.com>. (The previous implementation
3895 worked incorrectly for those cases where range = 10..._2 and
3896 3*range is two bits longer than range.)
3899 *) Only add signing time to PKCS7 structures if it is not already
3903 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
3904 OBJ_ld_ce should be OBJ_id_ce.
3905 Also some ip-pda OIDs in crypto/objects/objects.txt were
3906 incorrect (cf. RFC 3039).
3907 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
3909 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
3910 returns early because it has nothing to do.
3911 [Andy Schneider <andy.schneider@bjss.co.uk>]
3913 *) [In 0.9.6c-engine release:]
3914 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
3915 [Andy Schneider <andy.schneider@bjss.co.uk>]
3917 *) [In 0.9.6c-engine release:]
3918 Add support for Cryptographic Appliance's keyserver technology.
3919 (Use engine 'keyclient')
3920 [Cryptographic Appliances and Geoff Thorpe]
3922 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
3923 is called via tools/c89.sh because arguments have to be
3924 rearranged (all '-L' options must appear before the first object
3926 [Richard Shapiro <rshapiro@abinitio.com>]
3928 *) [In 0.9.6c-engine release:]
3929 Add support for Broadcom crypto accelerator cards, backported
3931 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
3933 *) [In 0.9.6c-engine release:]
3934 Add support for SureWare crypto accelerator cards from
3935 Baltimore Technologies. (Use engine 'sureware')
3936 [Baltimore Technologies and Mark Cox]
3938 *) [In 0.9.6c-engine release:]
3939 Add support for crypto accelerator cards from Accelerated
3940 Encryption Processing, www.aep.ie. (Use engine 'aep')
3941 [AEP Inc. and Mark Cox]
3943 *) Add a configuration entry for gcc on UnixWare.
3944 [Gary Benson <gbenson@redhat.com>]
3946 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
3947 messages are stored in a single piece (fixed-length part and
3948 variable-length part combined) and fix various bugs found on the way.
3951 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
3952 instead. BIO_gethostbyname() does not know what timeouts are
3953 appropriate, so entries would stay in cache even when they have
3955 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
3957 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
3958 faced with a pathologically small ClientHello fragment that does
3959 not contain client_version: Instead of aborting with an error,
3960 simply choose the highest available protocol version (i.e.,
3961 TLS 1.0 unless it is disabled). In practice, ClientHello
3962 messages are never sent like this, but this change gives us
3963 strictly correct behaviour at least for TLS.
3966 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3967 never resets s->method to s->ctx->method when called from within
3968 one of the SSL handshake functions.
3969 [Bodo Moeller; problem pointed out by Niko Baric]
3971 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3972 (sent using the client's version number) if client_version is
3973 smaller than the protocol version in use. Also change
3974 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3975 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3976 the client will at least see that alert.
3979 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3983 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3984 client receives HelloRequest while in a handshake.
3985 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3987 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3988 should end in 'break', not 'goto end' which circuments various
3989 cleanups done in state SSL_ST_OK. But session related stuff
3990 must be disabled for SSL_ST_OK in the case that we just sent a
3993 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3994 before just sending a HelloRequest.
3995 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3997 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3998 reveal whether illegal block cipher padding was found or a MAC
3999 verification error occured. (Neither SSLerr() codes nor alerts
4000 are directly visible to potential attackers, but the information
4001 may leak via logfiles.)
4003 Similar changes are not required for the SSL 2.0 implementation
4004 because the number of padding bytes is sent in clear for SSL 2.0,
4005 and the extra bytes are just ignored. However ssl/s2_pkt.c
4006 failed to verify that the purported number of padding bytes is in
4010 *) Add OpenUNIX-8 support including shared libraries
4011 (Boyd Lynn Gerber <gerberb@zenez.com>).
4014 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
4015 'wristwatch attack' using huge encoding parameters (cf.
4016 James H. Manger's CRYPTO 2001 paper). Note that the
4017 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
4018 encoding parameters and hence was not vulnerable.
4021 *) BN_sqr() bug fix.
4022 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
4024 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
4025 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
4026 followed by modular reduction.
4027 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
4029 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
4030 equivalent based on BN_pseudo_rand() instead of BN_rand().
4033 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
4034 This function was broken, as the check for a new client hello message
4035 to handle SGC did not allow these large messages.
4036 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
4039 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
4042 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
4043 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
4046 *) Rework the configuration and shared library support for Tru64 Unix.
4047 The configuration part makes use of modern compiler features and
4048 still retains old compiler behavior for those that run older versions
4049 of the OS. The shared library support part includes a variant that
4050 uses the RPATH feature, and is available through the special
4051 configuration target "alpha-cc-rpath", which will never be selected
4053 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
4055 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
4056 with the same message size as in ssl3_get_certificate_request().
4057 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
4058 messages might inadvertently be reject as too long.
4059 [Petr Lampa <lampa@fee.vutbr.cz>]
4061 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
4064 *) Modified SSL library such that the verify_callback that has been set
4065 specificly for an SSL object with SSL_set_verify() is actually being
4066 used. Before the change, a verify_callback set with this function was
4067 ignored and the verify_callback() set in the SSL_CTX at the time of
4068 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
4069 to allow the necessary settings.
4072 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
4073 explicitly to NULL, as at least on Solaris 8 this seems not always to be
4074 done automatically (in contradiction to the requirements of the C
4075 standard). This made problems when used from OpenSSH.
4078 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
4079 dh->length and always used
4081 BN_rand_range(priv_key, dh->p).
4083 BN_rand_range() is not necessary for Diffie-Hellman, and this
4084 specific range makes Diffie-Hellman unnecessarily inefficient if
4085 dh->length (recommended exponent length) is much smaller than the
4086 length of dh->p. We could use BN_rand_range() if the order of
4087 the subgroup was stored in the DH structure, but we only have
4092 BN_rand(priv_key, l, ...)
4094 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
4100 RSA_eay_public_encrypt
4101 RSA_eay_private_decrypt
4102 RSA_eay_private_encrypt (signing)
4103 RSA_eay_public_decrypt (signature verification)
4105 (default implementations for RSA_public_encrypt,
4106 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
4107 always reject numbers >= n.
4110 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
4111 to synchronize access to 'locking_thread'. This is necessary on
4112 systems where access to 'locking_thread' (an 'unsigned long'
4113 variable) is not atomic.
4116 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
4117 *before* setting the 'crypto_lock_rand' flag. The previous code had
4118 a race condition if 0 is a valid thread ID.
4119 [Travis Vitek <vitek@roguewave.com>]
4121 *) Add support for shared libraries under Irix.
4122 [Albert Chin-A-Young <china@thewrittenword.com>]
4124 *) Add configuration option to build on Linux on both big-endian and
4126 [Ralf Baechle <ralf@uni-koblenz.de>]
4128 *) Add the possibility to create shared libraries on HP-UX.
4131 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
4133 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
4134 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
4135 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
4136 PRNG state recovery was possible based on the output of
4137 one PRNG request appropriately sized to gain knowledge on
4138 'md' followed by enough consecutive 1-byte PRNG requests
4139 to traverse all of 'state'.
4141 1. When updating 'md_local' (the current thread's copy of 'md')
4142 during PRNG output generation, hash all of the previous
4143 'md_local' value, not just the half used for PRNG output.
4145 2. Make the number of bytes from 'state' included into the hash
4146 independent from the number of PRNG bytes requested.
4148 The first measure alone would be sufficient to avoid
4149 Markku-Juhani's attack. (Actually it had never occurred
4150 to me that the half of 'md_local' used for chaining was the
4151 half from which PRNG output bytes were taken -- I had always
4152 assumed that the secret half would be used.) The second
4153 measure makes sure that additional data from 'state' is never
4154 mixed into 'md_local' in small portions; this heuristically
4155 further strengthens the PRNG.
4158 *) Fix crypto/bn/asm/mips3.s.
4161 *) When only the key is given to "enc", the IV is undefined. Print out
4162 an error message in this case.
4165 *) Handle special case when X509_NAME is empty in X509 printing routines.
4168 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
4169 positive and less than q.
4172 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
4173 used: it isn't thread safe and the add_lock_callback should handle
4175 [Paul Rose <Paul.Rose@bridge.com>]
4177 *) Verify that incoming data obeys the block size in
4178 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
4182 [Ulf Möller, Bodo Möller]
4184 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
4185 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
4186 when fixing the server behaviour for backwards-compatible 'client
4187 hello' messages. (Note that the attack is impractical against
4188 SSL 3.0 and TLS 1.0 anyway because length and version checking
4189 means that the probability of guessing a valid ciphertext is
4190 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
4193 Before 0.9.5, the countermeasure (hide the error by generating a
4194 random 'decryption result') did not work properly because
4195 ERR_clear_error() was missing, meaning that SSL_get_error() would
4196 detect the supposedly ignored error.
4198 Both problems are now fixed.
4201 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
4202 (previously it was 1024).
4205 *) Fix for compatibility mode trust settings: ignore trust settings
4206 unless some valid trust or reject settings are present.
4209 *) Fix for blowfish EVP: its a variable length cipher.
4212 *) Fix various bugs related to DSA S/MIME verification. Handle missing
4213 parameters in DSA public key structures and return an error in the
4214 DSA routines if parameters are absent.
4217 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
4218 in the current directory if neither $RANDFILE nor $HOME was set.
4219 RAND_file_name() in 0.9.6a returned NULL in this case. This has
4220 caused some confusion to Windows users who haven't defined $HOME.
4221 Thus RAND_file_name() is changed again: e_os.h can define a
4222 DEFAULT_HOME, which will be used if $HOME is not set.
4223 For Windows, we use "C:"; on other platforms, we still require
4224 environment variables.
4226 *) Move 'if (!initialized) RAND_poll()' into regions protected by
4227 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
4228 having multiple threads call RAND_poll() concurrently.
4231 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
4232 combination of a flag and a thread ID variable.
4233 Otherwise while one thread is in ssleay_rand_bytes (which sets the
4234 flag), *other* threads can enter ssleay_add_bytes without obeying
4235 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
4236 that they do not hold after the first thread unsets add_do_not_lock).
4239 *) Change bctest again: '-x' expressions are not available in all
4243 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
4245 *) Fix a couple of memory leaks in PKCS7_dataDecode()
4246 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
4248 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
4249 the default extension for executables, if any. Also, make the perl
4250 scripts that use symlink() to test if it really exists and use "cp"
4251 if it doesn't. All this made OpenSSL compilable and installable in
4255 *) Fix for asn1_GetSequence() for indefinite length constructed data.
4256 If SEQUENCE is length is indefinite just set c->slen to the total
4257 amount of data available.
4258 [Steve Henson, reported by shige@FreeBSD.org]
4259 [This change does not apply to 0.9.7.]
4261 *) Change bctest to avoid here-documents inside command substitution
4262 (workaround for FreeBSD /bin/sh bug).
4263 For compatibility with Ultrix, avoid shell functions (introduced
4264 in the bctest version that searches along $PATH).
4267 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
4268 with des_encrypt() defined on some operating systems, like Solaris
4272 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
4273 On the Importance of Eliminating Errors in Cryptographic
4274 Computations, J. Cryptology 14 (2001) 2, 101-119,
4275 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
4278 *) MIPS assembler BIGNUM division bug fix.
4281 *) Disabled incorrect Alpha assembler code.
4284 *) Fix PKCS#7 decode routines so they correctly update the length
4285 after reading an EOC for the EXPLICIT tag.
4287 [This change does not apply to 0.9.7.]
4289 *) Fix bug in PKCS#12 key generation routines. This was triggered
4290 if a 3DES key was generated with a 0 initial byte. Include
4291 PKCS12_BROKEN_KEYGEN compilation option to retain the old
4292 (but broken) behaviour.
4295 *) Enhance bctest to search for a working bc along $PATH and print
4297 [Tim Rice <tim@multitalents.net> via Richard Levitte]
4299 *) Fix memory leaks in err.c: free err_data string if necessary;
4300 don't write to the wrong index in ERR_set_error_data.
4303 *) Implement ssl23_peek (analogous to ssl23_read), which previously
4307 *) Replace rdtsc with _emit statements for VC++ version 5.
4308 [Jeremy Cooper <jeremy@baymoo.org>]
4310 *) Make it possible to reuse SSLv2 sessions.
4313 *) In copy_email() check for >= 0 as a return value for
4314 X509_NAME_get_index_by_NID() since 0 is a valid index.
4315 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
4317 *) Avoid coredump with unsupported or invalid public keys by checking if
4318 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
4319 PKCS7_verify() fails with non detached data.
4322 *) Don't use getenv in library functions when run as setuid/setgid.
4323 New function OPENSSL_issetugid().
4326 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
4327 due to incorrect handling of multi-threading:
4329 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
4331 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
4333 3. Count how many times MemCheck_off() has been called so that
4334 nested use can be treated correctly. This also avoids
4335 inband-signalling in the previous code (which relied on the
4336 assumption that thread ID 0 is impossible).
4339 *) Add "-rand" option also to s_client and s_server.
4342 *) Fix CPU detection on Irix 6.x.
4343 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
4344 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4346 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
4349 [This change does not apply to 0.9.7.]
4351 *) Use the cached encoding of an X509_NAME structure rather than
4352 copying it. This is apparently the reason for the libsafe "errors"
4353 but the code is actually correct.
4356 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
4357 Bleichenbacher's DSA attack.
4358 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
4359 to be set and top=0 forces the highest bit to be set; top=-1 is new
4360 and leaves the highest bit random.
4361 [Ulf Moeller, Bodo Moeller]
4363 *) In the NCONF_...-based implementations for CONF_... queries
4364 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
4365 a temporary CONF structure with the data component set to NULL
4366 (which gives segmentation faults in lh_retrieve).
4367 Instead, use NULL for the CONF pointer in CONF_get_string and
4368 CONF_get_number (which may use environment variables) and directly
4369 return NULL from CONF_get_section.
4372 *) Fix potential buffer overrun for EBCDIC.
4375 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
4376 keyUsage if basicConstraints absent for a CA.
4379 *) Make SMIME_write_PKCS7() write mail header values with a format that
4380 is more generally accepted (no spaces before the semicolon), since
4381 some programs can't parse those values properly otherwise. Also make
4382 sure BIO's that break lines after each write do not create invalid
4386 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
4387 macros previously used would not encode an empty SEQUENCE OF
4388 and break the signature.
4390 [This change does not apply to 0.9.7.]
4392 *) Zero the premaster secret after deriving the master secret in
4396 *) Add some EVP_add_digest_alias registrations (as found in
4397 OpenSSL_add_all_digests()) to SSL_library_init()
4398 aka OpenSSL_add_ssl_algorithms(). This provides improved
4399 compatibility with peers using X.509 certificates
4400 with unconventional AlgorithmIdentifier OIDs.
4403 *) Fix for Irix with NO_ASM.
4404 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4406 *) ./config script fixes.
4407 [Ulf Moeller, Richard Levitte]
4409 *) Fix 'openssl passwd -1'.
4412 *) Change PKCS12_key_gen_asc() so it can cope with non null
4413 terminated strings whose length is passed in the passlen
4414 parameter, for example from PEM callbacks. This was done
4415 by adding an extra length parameter to asc2uni().
4416 [Steve Henson, reported by <oddissey@samsung.co.kr>]
4418 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
4419 call failed, free the DSA structure.
4422 *) Fix to uni2asc() to cope with zero length Unicode strings.
4423 These are present in some PKCS#12 files.
4426 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
4427 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
4428 when writing a 32767 byte record.
4429 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
4431 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
4432 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
4434 (RSA objects have a reference count access to which is protected
4435 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
4436 so they are meant to be shared between threads.)
4437 [Bodo Moeller, Geoff Thorpe; original patch submitted by
4438 "Reddie, Steven" <Steven.Reddie@ca.com>]
4440 *) Fix a deadlock in CRYPTO_mem_leaks().
4443 *) Use better test patterns in bntest.
4446 *) rand_win.c fix for Borland C.
4449 *) BN_rshift bugfix for n == 0.
4452 *) Add a 'bctest' script that checks for some known 'bc' bugs
4453 so that 'make test' does not abort just because 'bc' is broken.
4456 *) Store verify_result within SSL_SESSION also for client side to
4457 avoid potential security hole. (Re-used sessions on the client side
4458 always resulted in verify_result==X509_V_OK, not using the original
4459 result of the server certificate verification.)
4462 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
4463 SSL3_RT_APPLICATION_DATA, return 0.
4464 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
4468 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
4469 releases, have been re-implemented by renaming the previous
4470 implementations of ssl2_read and ssl3_read to ssl2_read_internal
4471 and ssl3_read_internal, respectively, and adding 'peek' parameters
4472 to them. The new ssl[23]_{read,peek} functions are calls to
4473 ssl[23]_read_internal with the 'peek' flag set appropriately.
4474 A 'peek' parameter has also been added to ssl3_read_bytes, which
4475 does the actual work for ssl3_read_internal.
4478 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
4479 the method-specific "init()" handler. Also clean up ex_data after
4480 calling the method-specific "finish()" handler. Previously, this was
4481 happening the other way round.
4484 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
4485 The previous value, 12, was not always sufficient for BN_mod_exp().
4488 *) Make sure that shared libraries get the internal name engine with
4489 the full version number and not just 0. This should mark the
4490 shared libraries as not backward compatible. Of course, this should
4491 be changed again when we can guarantee backward binary compatibility.
4494 *) Fix typo in get_cert_by_subject() in by_dir.c
4495 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
4497 *) Rework the system to generate shared libraries:
4499 - Make note of the expected extension for the shared libraries and
4500 if there is a need for symbolic links from for example libcrypto.so.0
4501 to libcrypto.so.0.9.7. There is extended info in Configure for
4504 - Make as few rebuilds of the shared libraries as possible.
4506 - Still avoid linking the OpenSSL programs with the shared libraries.
4508 - When installing, install the shared libraries separately from the
4512 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
4514 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
4515 and not in SSL_clear because the latter is also used by the
4516 accept/connect functions; previously, the settings made by
4517 SSL_set_read_ahead would be lost during the handshake.
4518 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
4520 *) Correct util/mkdef.pl to be selective about disabled algorithms.
4521 Previously, it would create entries for disableed algorithms no
4525 *) Added several new manual pages for SSL_* function.
4528 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
4530 *) In ssl23_get_client_hello, generate an error message when faced
4531 with an initial SSL 3.0/TLS record that is too small to contain the
4532 first two bytes of the ClientHello message, i.e. client_version.
4533 (Note that this is a pathologic case that probably has never happened
4534 in real life.) The previous approach was to use the version number
4535 from the record header as a substitute; but our protocol choice
4536 should not depend on that one because it is not authenticated
4537 by the Finished messages.
4540 *) More robust randomness gathering functions for Windows.
4541 [Jeffrey Altman <jaltman@columbia.edu>]
4543 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
4544 not set then we don't setup the error code for issuer check errors
4545 to avoid possibly overwriting other errors which the callback does
4546 handle. If an application does set the flag then we assume it knows
4547 what it is doing and can handle the new informational codes
4551 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
4552 a general "ANY" type, as such it should be able to decode anything
4553 including tagged types. However it didn't check the class so it would
4554 wrongly interpret tagged types in the same way as their universal
4555 counterpart and unknown types were just rejected. Changed so that the
4556 tagged and unknown types are handled in the same way as a SEQUENCE:
4557 that is the encoding is stored intact. There is also a new type
4558 "V_ASN1_OTHER" which is used when the class is not universal, in this
4559 case we have no idea what the actual type is so we just lump them all
4563 *) On VMS, stdout may very well lead to a file that is written to
4564 in a record-oriented fashion. That means that every write() will
4565 write a separate record, which will be read separately by the
4566 programs trying to read from it. This can be very confusing.
4568 The solution is to put a BIO filter in the way that will buffer
4569 text until a linefeed is reached, and then write everything a
4570 line at a time, so every record written will be an actual line,
4571 not chunks of lines and not (usually doesn't happen, but I've
4572 seen it once) several lines in one record. BIO_f_linebuffer() is
4575 Currently, it's a VMS-only method, because that's where it has
4576 been tested well enough.
4579 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
4580 it can return incorrect results.
4581 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
4582 but it was in 0.9.6-beta[12].)
4585 *) Disable the check for content being present when verifying detached
4586 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
4587 include zero length content when signing messages.
4590 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
4591 BIO_ctrl (for BIO pairs).
4594 *) Add DSO method for VMS.
4597 *) Bug fix: Montgomery multiplication could produce results with the
4601 *) Add RPM specification openssl.spec and modify it to build three
4602 packages. The default package contains applications, application
4603 documentation and run-time libraries. The devel package contains
4604 include files, static libraries and function documentation. The
4605 doc package contains the contents of the doc directory. The original
4606 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
4609 *) Add a large number of documentation files for many SSL routines.
4610 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4612 *) Add a configuration entry for Sony News 4.
4613 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
4615 *) Don't set the two most significant bits to one when generating a
4616 random number < q in the DSA library.
4619 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
4620 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
4621 the underlying transport is blocking) if a handshake took place.
4622 (The default behaviour is needed by applications such as s_client
4623 and s_server that use select() to determine when to use SSL_read;
4624 but for applications that know in advance when to expect data, it
4625 just makes things more complicated.)
4628 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
4632 *) Add a few more EBCDIC conditionals that make `req' and `x509'
4633 work better on such systems.
4634 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4636 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
4637 Update PKCS12_parse() so it copies the friendlyName and the
4638 keyid to the certificates aux info.
4641 *) Fix bug in PKCS7_verify() which caused an infinite loop
4642 if there was more than one signature.
4643 [Sven Uszpelkat <su@celocom.de>]
4645 *) Major change in util/mkdef.pl to include extra information
4646 about each symbol, as well as presentig variables as well
4647 as functions. This change means that there's n more need
4648 to rebuild the .num files when some algorithms are excluded.
4651 *) Allow the verify time to be set by an application,
4652 rather than always using the current time.
4655 *) Phase 2 verify code reorganisation. The certificate
4656 verify code now looks up an issuer certificate by a
4657 number of criteria: subject name, authority key id
4658 and key usage. It also verifies self signed certificates
4659 by the same criteria. The main comparison function is
4660 X509_check_issued() which performs these checks.
4662 Lot of changes were necessary in order to support this
4663 without completely rewriting the lookup code.
4665 Authority and subject key identifier are now cached.
4667 The LHASH 'certs' is X509_STORE has now been replaced
4668 by a STACK_OF(X509_OBJECT). This is mainly because an
4669 LHASH can't store or retrieve multiple objects with
4670 the same hash value.
4672 As a result various functions (which were all internal
4673 use only) have changed to handle the new X509_STORE
4674 structure. This will break anything that messed round
4675 with X509_STORE internally.
4677 The functions X509_STORE_add_cert() now checks for an
4678 exact match, rather than just subject name.
4680 The X509_STORE API doesn't directly support the retrieval
4681 of multiple certificates matching a given criteria, however
4682 this can be worked round by performing a lookup first
4683 (which will fill the cache with candidate certificates)
4684 and then examining the cache for matches. This is probably
4685 the best we can do without throwing out X509_LOOKUP
4686 entirely (maybe later...).
4688 The X509_VERIFY_CTX structure has been enhanced considerably.
4690 All certificate lookup operations now go via a get_issuer()
4691 callback. Although this currently uses an X509_STORE it
4692 can be replaced by custom lookups. This is a simple way
4693 to bypass the X509_STORE hackery necessary to make this
4694 work and makes it possible to use more efficient techniques
4695 in future. A very simple version which uses a simple
4696 STACK for its trusted certificate store is also provided
4697 using X509_STORE_CTX_trusted_stack().
4699 The verify_cb() and verify() callbacks now have equivalents
4700 in the X509_STORE_CTX structure.
4702 X509_STORE_CTX also has a 'flags' field which can be used
4703 to customise the verify behaviour.
4706 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
4707 excludes S/MIME capabilities.
4710 *) When a certificate request is read in keep a copy of the
4711 original encoding of the signed data and use it when outputing
4712 again. Signatures then use the original encoding rather than
4713 a decoded, encoded version which may cause problems if the
4714 request is improperly encoded.
4717 *) For consistency with other BIO_puts implementations, call
4718 buffer_write(b, ...) directly in buffer_puts instead of calling
4721 In BIO_puts, increment b->num_write as in BIO_write.
4722 [Peter.Sylvester@EdelWeb.fr]
4724 *) Fix BN_mul_word for the case where the word is 0. (We have to use
4725 BN_zero, we may not return a BIGNUM with an array consisting of
4729 *) Avoid calling abort() from within the library when problems are
4730 detected, except if preprocessor symbols have been defined
4731 (such as REF_CHECK, BN_DEBUG etc.).
4734 *) New openssl application 'rsautl'. This utility can be
4735 used for low level RSA operations. DER public key
4736 BIO/fp routines also added.
4739 *) New Configure entry and patches for compiling on QNX 4.
4740 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
4742 *) A demo state-machine implementation was sponsored by
4743 Nuron (http://www.nuron.com/) and is now available in
4744 demos/state_machine.
4747 *) New options added to the 'dgst' utility for signature
4748 generation and verification.
4751 *) Unrecognized PKCS#7 content types are now handled via a
4752 catch all ASN1_TYPE structure. This allows unsupported
4753 types to be stored as a "blob" and an application can
4754 encode and decode it manually.
4757 *) Fix various signed/unsigned issues to make a_strex.c
4759 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
4761 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
4762 length if passed a buffer. ASN1_INTEGER_to_BN failed
4763 if passed a NULL BN and its argument was negative.
4764 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
4766 *) Modification to PKCS#7 encoding routines to output definite
4767 length encoding. Since currently the whole structures are in
4768 memory there's not real point in using indefinite length
4769 constructed encoding. However if OpenSSL is compiled with
4770 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
4773 *) Added BIO_vprintf() and BIO_vsnprintf().
4776 *) Added more prefixes to parse for in the the strings written
4777 through a logging bio, to cover all the levels that are available
4778 through syslog. The prefixes are now:
4780 PANIC, EMERG, EMR => LOG_EMERG
4781 ALERT, ALR => LOG_ALERT
4782 CRIT, CRI => LOG_CRIT
4783 ERROR, ERR => LOG_ERR
4784 WARNING, WARN, WAR => LOG_WARNING
4785 NOTICE, NOTE, NOT => LOG_NOTICE
4786 INFO, INF => LOG_INFO
4787 DEBUG, DBG => LOG_DEBUG
4789 and as before, if none of those prefixes are present at the
4790 beginning of the string, LOG_ERR is chosen.
4792 On Win32, the LOG_* levels are mapped according to this:
4794 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
4795 LOG_WARNING => EVENTLOG_WARNING_TYPE
4796 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
4800 *) Made it possible to reconfigure with just the configuration
4801 argument "reconf" or "reconfigure". The command line arguments
4802 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
4803 and are retrieved from there when reconfiguring.
4807 [Assar Westerlund <assar@sics.se>, Richard Levitte]
4809 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
4812 *) The obj_dat.pl script was messing up the sorting of object
4813 names. The reason was that it compared the quoted version
4814 of strings as a result "OCSP" > "OCSP Signing" because
4815 " > SPACE. Changed script to store unquoted versions of
4816 names and add quotes on output. It was also omitting some
4817 names from the lookup table if they were given a default
4818 value (that is if SN is missing it is given the same
4819 value as LN and vice versa), these are now added on the
4820 grounds that if an object has a name we should be able to
4821 look it up. Finally added warning output when duplicate
4822 short or long names are found.
4825 *) Changes needed for Tandem NSK.
4826 [Scott Uroff <scott@xypro.com>]
4828 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
4829 RSA_padding_check_SSLv23(), special padding was never detected
4830 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
4831 version rollback attacks was not effective.
4833 In s23_clnt.c, don't use special rollback-attack detection padding
4834 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
4835 client; similarly, in s23_srvr.c, don't do the rollback check if
4836 SSL 2.0 is the only protocol enabled in the server.
4839 *) Make it possible to get hexdumps of unprintable data with 'openssl
4840 asn1parse'. By implication, the functions ASN1_parse_dump() and
4841 BIO_dump_indent() are added.
4844 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
4845 these print out strings and name structures based on various
4846 flags including RFC2253 support and proper handling of
4847 multibyte characters. Added options to the 'x509' utility
4848 to allow the various flags to be set.
4851 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
4852 Also change the functions X509_cmp_current_time() and
4853 X509_gmtime_adj() work with an ASN1_TIME structure,
4854 this will enable certificates using GeneralizedTime in validity
4855 dates to be checked.
4858 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
4859 negative public key encodings) on by default,
4860 NO_NEG_PUBKEY_BUG can be set to disable it.
4863 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
4864 content octets. An i2c_ASN1_OBJECT is unnecessary because
4865 the encoding can be trivially obtained from the structure.
4868 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
4869 not read locks (CRYPTO_r_[un]lock).
4872 *) A first attempt at creating official support for shared
4873 libraries through configuration. I've kept it so the
4874 default is static libraries only, and the OpenSSL programs
4875 are always statically linked for now, but there are
4876 preparations for dynamic linking in place.
4877 This has been tested on Linux and Tru64.
4880 *) Randomness polling function for Win9x, as described in:
4881 Peter Gutmann, Software Generation of Practically Strong
4885 *) Fix so PRNG is seeded in req if using an already existing
4889 *) New options to smime application. -inform and -outform
4890 allow alternative formats for the S/MIME message including
4891 PEM and DER. The -content option allows the content to be
4892 specified separately. This should allow things like Netscape
4893 form signing output easier to verify.
4896 *) Fix the ASN1 encoding of tags using the 'long form'.
4899 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
4900 STRING types. These convert content octets to and from the
4901 underlying type. The actual tag and length octets are
4902 already assumed to have been read in and checked. These
4903 are needed because all other string types have virtually
4904 identical handling apart from the tag. By having versions
4905 of the ASN1 functions that just operate on content octets
4906 IMPLICIT tagging can be handled properly. It also allows
4907 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
4908 and ASN1_INTEGER are identical apart from the tag.
4911 *) Change the handling of OID objects as follows:
4913 - New object identifiers are inserted in objects.txt, following
4914 the syntax given in objects.README.
4915 - objects.pl is used to process obj_mac.num and create a new
4917 - obj_dat.pl is used to create a new obj_dat.h, using the data in
4920 This is currently kind of a hack, and the perl code in objects.pl
4921 isn't very elegant, but it works as I intended. The simplest way
4922 to check that it worked correctly is to look in obj_dat.h and
4923 check the array nid_objs and make sure the objects haven't moved
4924 around (this is important!). Additions are OK, as well as
4925 consistent name changes.
4928 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
4931 *) Addition of the command line parameter '-rand file' to 'openssl req'.
4932 The given file adds to whatever has already been seeded into the
4933 random pool through the RANDFILE configuration file option or
4934 environment variable, or the default random state file.
4937 *) mkstack.pl now sorts each macro group into lexical order.
4938 Previously the output order depended on the order the files
4939 appeared in the directory, resulting in needless rewriting
4943 *) Patches to make OpenSSL compile under Win32 again. Mostly
4944 work arounds for the VC++ problem that it treats func() as
4945 func(void). Also stripped out the parts of mkdef.pl that
4946 added extra typesafe functions: these no longer exist.
4949 *) Reorganisation of the stack code. The macros are now all
4950 collected in safestack.h . Each macro is defined in terms of
4951 a "stack macro" of the form SKM_<name>(type, a, b). The
4952 DEBUG_SAFESTACK is now handled in terms of function casts,
4953 this has the advantage of retaining type safety without the
4954 use of additional functions. If DEBUG_SAFESTACK is not defined
4955 then the non typesafe macros are used instead. Also modified the
4956 mkstack.pl script to handle the new form. Needs testing to see
4957 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
4958 the default if no major problems. Similar behaviour for ASN1_SET_OF
4959 and PKCS12_STACK_OF.
4962 *) When some versions of IIS use the 'NET' form of private key the
4963 key derivation algorithm is different. Normally MD5(password) is
4964 used as a 128 bit RC4 key. In the modified case
4965 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4966 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4967 as the old Netscape_RSA functions except they have an additional
4968 'sgckey' parameter which uses the modified algorithm. Also added
4969 an -sgckey command line option to the rsa utility. Thanks to
4970 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4971 algorithm to openssl-dev.
4974 *) The evp_local.h macros were using 'c.##kname' which resulted in
4975 invalid expansion on some systems (SCO 5.0.5 for example).
4976 Corrected to 'c.kname'.
4977 [Phillip Porch <root@theporch.com>]
4979 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4980 a STACK of email addresses from a certificate or request, these look
4981 in the subject name and the subject alternative name extensions and
4982 omit any duplicate addresses.
4985 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4986 This makes DSA verification about 2 % faster.
4989 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4990 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4991 plus overhead for 1024 bit moduli).
4992 This makes exponentiations about 0.5 % faster for 1024 bit
4993 exponents (as measured by "openssl speed rsa2048").
4996 *) Rename memory handling macros to avoid conflicts with other
4998 Malloc => OPENSSL_malloc
4999 Malloc_locked => OPENSSL_malloc_locked
5000 Realloc => OPENSSL_realloc
5001 Free => OPENSSL_free
5004 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
5005 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
5008 *) CygWin32 support.
5009 [John Jarvie <jjarvie@newsguy.com>]
5011 *) The type-safe stack code has been rejigged. It is now only compiled
5012 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
5013 by default all type-specific stack functions are "#define"d back to
5014 standard stack functions. This results in more streamlined output
5015 but retains the type-safety checking possibilities of the original
5019 *) The STACK code has been cleaned up, and certain type declarations
5020 that didn't make a lot of sense have been brought in line. This has
5021 also involved a cleanup of sorts in safestack.h to more correctly
5022 map type-safe stack functions onto their plain stack counterparts.
5023 This work has also resulted in a variety of "const"ifications of
5024 lots of the code, especially "_cmp" operations which should normally
5025 be prototyped with "const" parameters anyway.
5028 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
5029 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
5030 (The PRNG state consists of two parts, the large pool 'state' and 'md',
5031 where all of 'md' is used each time the PRNG is used, but 'state'
5032 is used only indexed by a cyclic counter. As entropy may not be
5033 well distributed from the beginning, 'md' is important as a
5034 chaining variable. However, the output function chains only half
5035 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
5036 all of 'md', and seeding with STATE_SIZE dummy bytes will result
5037 in all of 'state' being rewritten, with the new values depending
5038 on virtually all of 'md'. This overcomes the 80 bit limitation.)
5041 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
5042 the handshake is continued after ssl_verify_cert_chain();
5043 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
5044 can lead to 'unexplainable' connection aborts later.
5045 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
5047 *) Major EVP API cipher revision.
5048 Add hooks for extra EVP features. This allows various cipher
5049 parameters to be set in the EVP interface. Support added for variable
5050 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
5051 setting of RC2 and RC5 parameters.
5053 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
5056 Remove lots of duplicated code from the EVP library. For example *every*
5057 cipher init() function handles the 'iv' in the same way according to the
5058 cipher mode. They also all do nothing if the 'key' parameter is NULL and
5059 for CFB and OFB modes they zero ctx->num.
5061 New functionality allows removal of S/MIME code RC2 hack.
5063 Most of the routines have the same form and so can be declared in terms
5066 By shifting this to the top level EVP_CipherInit() it can be removed from
5067 all individual ciphers. If the cipher wants to handle IVs or keys
5068 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
5071 Change lots of functions like EVP_EncryptUpdate() to now return a
5072 value: although software versions of the algorithms cannot fail
5073 any installed hardware versions can.
5076 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
5077 this option is set, tolerate broken clients that send the negotiated
5078 protocol version number instead of the requested protocol version
5082 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
5083 i.e. non-zero for export ciphersuites, zero otherwise.
5084 Previous versions had this flag inverted, inconsistent with
5085 rsa_tmp_cb (..._TMP_RSA_CB).
5086 [Bodo Moeller; problem reported by Amit Chopra]
5088 *) Add missing DSA library text string. Work around for some IIS
5089 key files with invalid SEQUENCE encoding.
5092 *) Add a document (doc/standards.txt) that list all kinds of standards
5093 and so on that are implemented in OpenSSL.
5096 *) Enhance c_rehash script. Old version would mishandle certificates
5097 with the same subject name hash and wouldn't handle CRLs at all.
5098 Added -fingerprint option to crl utility, to support new c_rehash
5102 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
5105 *) Fix for SSL server purpose checking. Server checking was
5106 rejecting certificates which had extended key usage present
5107 but no ssl client purpose.
5108 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
5110 *) Make PKCS#12 code work with no password. The PKCS#12 spec
5111 is a little unclear about how a blank password is handled.
5112 Since the password in encoded as a BMPString with terminating
5113 double NULL a zero length password would end up as just the
5114 double NULL. However no password at all is different and is
5115 handled differently in the PKCS#12 key generation code. NS
5116 treats a blank password as zero length. MSIE treats it as no
5117 password on export: but it will try both on import. We now do
5118 the same: PKCS12_parse() tries zero length and no password if
5119 the password is set to "" or NULL (NULL is now a valid password:
5120 it wasn't before) as does the pkcs12 application.
5123 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
5124 perror when PEM_read_bio_X509_REQ fails, the error message must
5125 be obtained from the error queue.
5128 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
5129 it in ERR_remove_state if appropriate, and change ERR_get_state
5130 accordingly to avoid race conditions (this is necessary because
5131 thread_hash is no longer constant once set).
5134 *) Bugfix for linux-elf makefile.one.
5137 *) RSA_get_default_method() will now cause a default
5138 RSA_METHOD to be chosen if one doesn't exist already.
5139 Previously this was only set during a call to RSA_new()
5140 or RSA_new_method(NULL) meaning it was possible for
5141 RSA_get_default_method() to return NULL.
5144 *) Added native name translation to the existing DSO code
5145 that will convert (if the flag to do so is set) filenames
5146 that are sufficiently small and have no path information
5147 into a canonical native form. Eg. "blah" converted to
5148 "libblah.so" or "blah.dll" etc.
5151 *) New function ERR_error_string_n(e, buf, len) which is like
5152 ERR_error_string(e, buf), but writes at most 'len' bytes
5153 including the 0 terminator. For ERR_error_string_n, 'buf'
5155 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
5157 *) CONF library reworked to become more general. A new CONF
5158 configuration file reader "class" is implemented as well as a
5159 new functions (NCONF_*, for "New CONF") to handle it. The now
5160 old CONF_* functions are still there, but are reimplemented to
5161 work in terms of the new functions. Also, a set of functions
5162 to handle the internal storage of the configuration data is
5163 provided to make it easier to write new configuration file
5164 reader "classes" (I can definitely see something reading a
5165 configuration file in XML format, for example), called _CONF_*,
5166 or "the configuration storage API"...
5168 The new configuration file reading functions are:
5170 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
5171 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
5173 NCONF_default, NCONF_WIN32
5175 NCONF_dump_fp, NCONF_dump_bio
5177 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
5178 NCONF_new creates a new CONF object. This works in the same way
5179 as other interfaces in OpenSSL, like the BIO interface.
5180 NCONF_dump_* dump the internal storage of the configuration file,
5181 which is useful for debugging. All other functions take the same
5182 arguments as the old CONF_* functions wth the exception of the
5183 first that must be a `CONF *' instead of a `LHASH *'.
5185 To make it easer to use the new classes with the old CONF_* functions,
5186 the function CONF_set_default_method is provided.
5189 *) Add '-tls1' option to 'openssl ciphers', which was already
5190 mentioned in the documentation but had not been implemented.
5191 (This option is not yet really useful because even the additional
5192 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
5195 *) Initial DSO code added into libcrypto for letting OpenSSL (and
5196 OpenSSL-based applications) load shared libraries and bind to
5197 them in a portable way.
5198 [Geoff Thorpe, with contributions from Richard Levitte]
5200 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
5202 *) Make sure _lrotl and _lrotr are only used with MSVC.
5204 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
5205 (the default implementation of RAND_status).
5207 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
5208 to '-clrext' (= clear extensions), as intended and documented.
5209 [Bodo Moeller; inconsistency pointed out by Michael Attili
5212 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
5213 was larger than the MD block size.
5214 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
5216 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
5217 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
5218 using the passed key: if the passed key was a private key the result
5219 of X509_print(), for example, would be to print out all the private key
5223 *) des_quad_cksum() byte order bug fix.
5224 [Ulf Möller, using the problem description in krb4-0.9.7, where
5225 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
5227 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
5229 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
5231 *) For easily testing in shell scripts whether some command
5232 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
5233 returns with exit code 0 iff no command of the given name is available.
5234 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
5235 the output goes to stdout and nothing is printed to stderr.
5236 Additional arguments are always ignored.
5238 Since for each cipher there is a command of the same name,
5239 the 'no-cipher' compilation switches can be tested this way.
5241 ('openssl no-XXX' is not able to detect pseudo-commands such
5242 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
5245 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
5248 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
5249 is set; it will be thrown away anyway because each handshake creates
5251 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
5252 to parameters -- in previous versions (since OpenSSL 0.9.3) the
5253 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
5254 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
5257 *) New s_client option -ign_eof: EOF at stdin is ignored, and
5258 'Q' and 'R' lose their special meanings (quit/renegotiate).
5259 This is part of what -quiet does; unlike -quiet, -ign_eof
5260 does not suppress any output.
5263 *) Add compatibility options to the purpose and trust code. The
5264 purpose X509_PURPOSE_ANY is "any purpose" which automatically
5265 accepts a certificate or CA, this was the previous behaviour,
5266 with all the associated security issues.
5268 X509_TRUST_COMPAT is the old trust behaviour: only and
5269 automatically trust self signed roots in certificate store. A
5270 new trust setting X509_TRUST_DEFAULT is used to specify that
5271 a purpose has no associated trust setting and it should instead
5272 use the value in the default purpose.
5275 *) Fix the PKCS#8 DSA private key code so it decodes keys again
5276 and fix a memory leak.
5279 *) In util/mkerr.pl (which implements 'make errors'), preserve
5280 reason strings from the previous version of the .c file, as
5281 the default to have only downcase letters (and digits) in
5282 automatically generated reasons codes is not always appropriate.
5285 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
5286 using strerror. Previously, ERR_reason_error_string() returned
5287 library names as reason strings for SYSerr; but SYSerr is a special
5288 case where small numbers are errno values, not library numbers.
5291 *) Add '-dsaparam' option to 'openssl dhparam' application. This
5292 converts DSA parameters into DH parameters. (When creating parameters,
5293 DSA_generate_parameters is used.)
5296 *) Include 'length' (recommended exponent length) in C code generated
5297 by 'openssl dhparam -C'.
5300 *) The second argument to set_label in perlasm was already being used
5301 so couldn't be used as a "file scope" flag. Moved to third argument
5305 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
5306 instead of RAND_bytes for encryption IVs and salts.
5309 *) Include RAND_status() into RAND_METHOD instead of implementing
5310 it only for md_rand.c Otherwise replacing the PRNG by calling
5311 RAND_set_rand_method would be impossible.
5314 *) Don't let DSA_generate_key() enter an infinite loop if the random
5315 number generation fails.
5318 *) New 'rand' application for creating pseudo-random output.
5321 *) Added configuration support for Linux/IA64
5322 [Rolf Haberrecker <rolf@suse.de>]
5324 *) Assembler module support for Mingw32.
5327 *) Shared library support for HPUX (in shlib/).
5328 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
5330 *) Shared library support for Solaris gcc.
5331 [Lutz Behnke <behnke@trustcenter.de>]
5333 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
5335 *) PKCS7_encrypt() was adding text MIME headers twice because they
5336 were added manually and by SMIME_crlf_copy().
5339 *) In bntest.c don't call BN_rand with zero bits argument.
5340 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
5342 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
5343 case was implemented. This caused BN_div_recp() to fail occasionally.
5346 *) Add an optional second argument to the set_label() in the perl
5347 assembly language builder. If this argument exists and is set
5348 to 1 it signals that the assembler should use a symbol whose
5349 scope is the entire file, not just the current function. This
5350 is needed with MASM which uses the format label:: for this scope.
5351 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
5353 *) Change the ASN1 types so they are typedefs by default. Before
5354 almost all types were #define'd to ASN1_STRING which was causing
5355 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
5359 *) Change names of new functions to the new get1/get0 naming
5360 convention: After 'get1', the caller owns a reference count
5361 and has to call ..._free; 'get0' returns a pointer to some
5362 data structure without incrementing reference counters.
5363 (Some of the existing 'get' functions increment a reference
5364 counter, some don't.)
5365 Similarly, 'set1' and 'add1' functions increase reference
5366 counters or duplicate objects.
5369 *) Allow for the possibility of temp RSA key generation failure:
5370 the code used to assume it always worked and crashed on failure.
5373 *) Fix potential buffer overrun problem in BIO_printf().
5374 [Ulf Möller, using public domain code by Patrick Powell; problem
5375 pointed out by David Sacerdote <das33@cornell.edu>]
5377 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
5378 RAND_egd() and RAND_status(). In the command line application,
5379 the EGD socket can be specified like a seed file using RANDFILE
5383 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
5384 Some CAs (e.g. Verisign) distribute certificates in this form.
5387 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
5388 list to exclude them. This means that no special compilation option
5389 is needed to use anonymous DH: it just needs to be included in the
5393 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
5394 EVP_MD_type. The old functionality is available in a new macro called
5395 EVP_MD_md(). Change code that uses it and update docs.
5398 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
5399 where the 'void *' argument is replaced by a function pointer argument.
5400 Previously 'void *' was abused to point to functions, which works on
5401 many platforms, but is not correct. As these functions are usually
5402 called by macros defined in OpenSSL header files, most source code
5403 should work without changes.
5406 *) <openssl/opensslconf.h> (which is created by Configure) now contains
5407 sections with information on -D... compiler switches used for
5408 compiling the library so that applications can see them. To enable
5409 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
5410 must be defined. E.g.,
5411 #define OPENSSL_ALGORITHM_DEFINES
5412 #include <openssl/opensslconf.h>
5413 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
5414 [Richard Levitte, Ulf and Bodo Möller]
5416 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
5420 *) Change the 'other' type in certificate aux info to a STACK_OF
5421 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
5422 the required ASN1 format: arbitrary types determined by an OID.
5425 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
5426 argument to 'req'. This is not because the function is newer or
5427 better than others it just uses the work 'NEW' in the certificate
5428 request header lines. Some software needs this.
5431 *) Reorganise password command line arguments: now passwords can be
5432 obtained from various sources. Delete the PEM_cb function and make
5433 it the default behaviour: i.e. if the callback is NULL and the
5434 usrdata argument is not NULL interpret it as a null terminated pass
5435 phrase. If usrdata and the callback are NULL then the pass phrase
5436 is prompted for as usual.
5439 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
5440 the support is automatically enabled. The resulting binaries will
5441 autodetect the card and use it if present.
5442 [Ben Laurie and Compaq Inc.]
5444 *) Work around for Netscape hang bug. This sends certificate request
5445 and server done in one record. Since this is perfectly legal in the
5446 SSL/TLS protocol it isn't a "bug" option and is on by default. See
5447 the bugs/SSLv3 entry for more info.
5450 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
5453 *) Add -rand argument to smime and pkcs12 applications and read/write
5457 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
5460 *) Add command line password options to the remaining applications.
5463 *) Bug fix for BN_div_recp() for numerators with an even number of
5467 *) More tests in bntest.c, and changed test_bn output.
5470 *) ./config recognizes MacOS X now.
5473 *) Bug fix for BN_div() when the first words of num and divsor are
5474 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
5477 *) Add support for various broken PKCS#8 formats, and command line
5478 options to produce them.
5481 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
5482 get temporary BIGNUMs from a BN_CTX.
5485 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
5489 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
5490 include a #define from the old name to the new. The original intent
5491 was that statically linked binaries could for example just call
5492 SSLeay_add_all_ciphers() to just add ciphers to the table and not
5493 link with digests. This never worked becayse SSLeay_add_all_digests()
5494 and SSLeay_add_all_ciphers() were in the same source file so calling
5495 one would link with the other. They are now in separate source files.
5498 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
5501 *) Use a less unusual form of the Miller-Rabin primality test (it used
5502 a binary algorithm for exponentiation integrated into the Miller-Rabin
5503 loop, our standard modexp algorithms are faster).
5506 *) Support for the EBCDIC character set completed.
5507 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
5509 *) Source code cleanups: use const where appropriate, eliminate casts,
5510 use void * instead of char * in lhash.
5513 *) Bugfix: ssl3_send_server_key_exchange was not restartable
5514 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
5515 this the server could overwrite ephemeral keys that the client
5519 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
5520 using 50 iterations of the Rabin-Miller test.
5522 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
5523 iterations of the Rabin-Miller test as required by the appendix
5524 to FIPS PUB 186[-1]) instead of DSA_is_prime.
5525 As BN_is_prime_fasttest includes trial division, DSA parameter
5526 generation becomes much faster.
5528 This implies a change for the callback functions in DSA_is_prime
5529 and DSA_generate_parameters: The callback function is called once
5530 for each positive witness in the Rabin-Miller test, not just
5531 occasionally in the inner loop; and the parameters to the
5532 callback function now provide an iteration count for the outer
5533 loop rather than for the current invocation of the inner loop.
5534 DSA_generate_parameters additionally can call the callback
5535 function with an 'iteration count' of -1, meaning that a
5536 candidate has passed the trial division test (when q is generated
5537 from an application-provided seed, trial division is skipped).
5540 *) New function BN_is_prime_fasttest that optionally does trial
5541 division before starting the Rabin-Miller test and has
5542 an additional BN_CTX * argument (whereas BN_is_prime always
5543 has to allocate at least one BN_CTX).
5544 'callback(1, -1, cb_arg)' is called when a number has passed the
5545 trial division stage.
5548 *) Fix for bug in CRL encoding. The validity dates weren't being handled
5552 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
5555 *) New function BN_pseudo_rand().
5558 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
5559 bignum version of BN_from_montgomery() with the working code from
5560 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
5564 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
5565 made it impossible to use the same SSL_SESSION data structure in
5566 SSL2 clients in multiple threads.
5569 *) The return value of RAND_load_file() no longer counts bytes obtained
5570 by stat(). RAND_load_file(..., -1) is new and uses the complete file
5571 to seed the PRNG (previously an explicit byte count was required).
5572 [Ulf Möller, Bodo Möller]
5574 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
5575 used (char *) instead of (void *) and had casts all over the place.
5578 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
5581 *) Retain source code compatibility for BN_prime_checks macro:
5582 BN_is_prime(..., BN_prime_checks, ...) now uses
5583 BN_prime_checks_for_size to determine the appropriate number of
5584 Rabin-Miller iterations.
5587 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
5588 DH_CHECK_P_NOT_SAFE_PRIME.
5589 (Check if this is true? OpenPGP calls them "strong".)
5592 *) Merge the functionality of "dh" and "gendh" programs into a new program
5593 "dhparam". The old programs are retained for now but will handle DH keys
5594 (instead of parameters) in future.
5597 *) Make the ciphers, s_server and s_client programs check the return values
5598 when a new cipher list is set.
5601 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
5602 ciphers. Before when the 56bit ciphers were enabled the sorting was
5605 The syntax for the cipher sorting has been extended to support sorting by
5606 cipher-strength (using the strength_bits hard coded in the tables).
5607 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
5609 Fix a bug in the cipher-command parser: when supplying a cipher command
5610 string with an "undefined" symbol (neither command nor alphanumeric
5611 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
5612 an error is flagged.
5614 Due to the strength-sorting extension, the code of the
5615 ssl_create_cipher_list() function was completely rearranged. I hope that
5616 the readability was also increased :-)
5617 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
5619 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
5620 for the first serial number and places 2 in the serial number file. This
5621 avoids problems when the root CA is created with serial number zero and
5622 the first user certificate has the same issuer name and serial number
5626 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
5627 the new code. Add documentation for this stuff.
5630 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
5631 X509_*() to X509at_*() on the grounds that they don't handle X509
5632 structures and behave in an analagous way to the X509v3 functions:
5633 they shouldn't be called directly but wrapper functions should be used
5636 So we also now have some wrapper functions that call the X509at functions
5637 when passed certificate requests. (TO DO: similar things can be done with
5638 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
5639 things. Some of these need some d2i or i2d and print functionality
5640 because they handle more complex structures.)
5643 *) Add missing #ifndefs that caused missing symbols when building libssl
5644 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
5645 NO_RSA in ssl/s2*.c.
5646 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
5648 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
5649 has a return value which indicates the quality of the random data
5650 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
5651 error queue. New function RAND_pseudo_bytes() generates output that is
5652 guaranteed to be unique but not unpredictable. RAND_add is like
5653 RAND_seed, but takes an extra argument for an entropy estimate
5654 (RAND_seed always assumes full entropy).
5657 *) Do more iterations of Rabin-Miller probable prime test (specifically,
5658 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
5659 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
5660 in crypto/bn/bn_prime.c for the complete table). This guarantees a
5661 false-positive rate of at most 2^-80 for random input.
5664 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
5667 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
5668 in the 0.9.5 release), this returns the chain
5669 from an X509_CTX structure with a dup of the stack and all
5670 the X509 reference counts upped: so the stack will exist
5671 after X509_CTX_cleanup() has been called. Modify pkcs12.c
5674 Also make SSL_SESSION_print() print out the verify return
5678 *) Add manpage for the pkcs12 command. Also change the default
5679 behaviour so MAC iteration counts are used unless the new
5680 -nomaciter option is used. This improves file security and
5681 only older versions of MSIE (4.0 for example) need it.
5684 *) Honor the no-xxx Configure options when creating .DEF files.
5687 *) Add PKCS#10 attributes to field table: challengePassword,
5688 unstructuredName and unstructuredAddress. These are taken from
5689 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
5690 international characters are used.
5692 More changes to X509_ATTRIBUTE code: allow the setting of types
5693 based on strings. Remove the 'loc' parameter when adding
5694 attributes because these will be a SET OF encoding which is sorted
5698 *) Initial changes to the 'req' utility to allow request generation
5699 automation. This will allow an application to just generate a template
5700 file containing all the field values and have req construct the
5703 Initial support for X509_ATTRIBUTE handling. Stacks of these are
5704 used all over the place including certificate requests and PKCS#7
5705 structures. They are currently handled manually where necessary with
5706 some primitive wrappers for PKCS#7. The new functions behave in a
5707 manner analogous to the X509 extension functions: they allow
5708 attributes to be looked up by NID and added.
5710 Later something similar to the X509V3 code would be desirable to
5711 automatically handle the encoding, decoding and printing of the
5712 more complex types. The string types like challengePassword can
5713 be handled by the string table functions.
5715 Also modified the multi byte string table handling. Now there is
5716 a 'global mask' which masks out certain types. The table itself
5717 can use the flag STABLE_NO_MASK to ignore the mask setting: this
5718 is useful when for example there is only one permissible type
5719 (as in countryName) and using the mask might result in no valid
5723 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
5724 SSL_get_peer_finished to allow applications to obtain the latest
5725 Finished messages sent to the peer or expected from the peer,
5726 respectively. (SSL_get_peer_finished is usually the Finished message
5727 actually received from the peer, otherwise the protocol will be aborted.)
5729 As the Finished message are message digests of the complete handshake
5730 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
5731 be used for external authentication procedures when the authentication
5732 provided by SSL/TLS is not desired or is not enough.
5735 *) Enhanced support for Alpha Linux is added. Now ./config checks if
5736 the host supports BWX extension and if Compaq C is present on the
5737 $PATH. Just exploiting of the BWX extension results in 20-30%
5738 performance kick for some algorithms, e.g. DES and RC4 to mention
5739 a couple. Compaq C in turn generates ~20% faster code for MD5 and
5743 *) Add support for MS "fast SGC". This is arguably a violation of the
5744 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
5745 weak crypto and after checking the certificate is SGC a second one
5746 with strong crypto. MS SGC stops the first handshake after receiving
5747 the server certificate message and sends a second client hello. Since
5748 a server will typically do all the time consuming operations before
5749 expecting any further messages from the client (server key exchange
5750 is the most expensive) there is little difference between the two.
5752 To get OpenSSL to support MS SGC we have to permit a second client
5753 hello message after we have sent server done. In addition we have to
5754 reset the MAC if we do get this second client hello.
5757 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
5758 if a DER encoded private key is RSA or DSA traditional format. Changed
5759 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
5760 format DER encoded private key. Newer code should use PKCS#8 format which
5761 has the key type encoded in the ASN1 structure. Added DER private key
5762 support to pkcs8 application.
5765 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
5766 ciphersuites has been selected (as required by the SSL 3/TLS 1
5767 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
5768 is set, we interpret this as a request to violate the specification
5769 (the worst that can happen is a handshake failure, and 'correct'
5770 behaviour would result in a handshake failure anyway).
5773 *) In SSL_CTX_add_session, take into account that there might be multiple
5774 SSL_SESSION structures with the same session ID (e.g. when two threads
5775 concurrently obtain them from an external cache).
5776 The internal cache can handle only one SSL_SESSION with a given ID,
5777 so if there's a conflict, we now throw out the old one to achieve
5781 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
5782 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
5783 some routines that use cipher OIDs: some ciphers do not have OIDs
5784 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
5788 *) Simplify the trust setting structure and code. Now we just have
5789 two sequences of OIDs for trusted and rejected settings. These will
5790 typically have values the same as the extended key usage extension
5791 and any application specific purposes.
5793 The trust checking code now has a default behaviour: it will just
5794 check for an object with the same NID as the passed id. Functions can
5795 be provided to override either the default behaviour or the behaviour
5796 for a given id. SSL client, server and email already have functions
5797 in place for compatibility: they check the NID and also return "trusted"
5798 if the certificate is self signed.
5801 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
5802 traditional format into an EVP_PKEY structure.
5805 *) Add a password callback function PEM_cb() which either prompts for
5806 a password if usr_data is NULL or otherwise assumes it is a null
5807 terminated password. Allow passwords to be passed on command line
5808 environment or config files in a few more utilities.
5811 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
5812 keys. Add some short names for PKCS#8 PBE algorithms and allow them
5813 to be specified on the command line for the pkcs8 and pkcs12 utilities.
5814 Update documentation.
5817 *) Support for ASN1 "NULL" type. This could be handled before by using
5818 ASN1_TYPE but there wasn't any function that would try to read a NULL
5819 and produce an error if it couldn't. For compatibility we also have
5820 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
5821 don't allocate anything because they don't need to.
5824 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
5826 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
5828 *) Rebuild of the memory allocation routines used by OpenSSL code and
5829 possibly others as well. The purpose is to make an interface that
5830 provide hooks so anyone can build a separate set of allocation and
5831 deallocation routines to be used by OpenSSL, for example memory
5832 pool implementations, or something else, which was previously hard
5833 since Malloc(), Realloc() and Free() were defined as macros having
5834 the values malloc, realloc and free, respectively (except for Win32
5835 compilations). The same is provided for memory debugging code.
5836 OpenSSL already comes with functionality to find memory leaks, but
5837 this gives people a chance to debug other memory problems.
5839 With these changes, a new set of functions and macros have appeared:
5841 CRYPTO_set_mem_debug_functions() [F]
5842 CRYPTO_get_mem_debug_functions() [F]
5843 CRYPTO_dbg_set_options() [F]
5844 CRYPTO_dbg_get_options() [F]
5845 CRYPTO_malloc_debug_init() [M]
5847 The memory debug functions are NULL by default, unless the library
5848 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
5849 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
5850 gives the standard debugging functions that come with OpenSSL) or
5851 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
5852 provided by the library user) must be used. When the standard
5853 debugging functions are used, CRYPTO_dbg_set_options can be used to
5854 request additional information:
5855 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
5856 the CRYPTO_MDEBUG_xxx macro when compiling the library.
5858 Also, things like CRYPTO_set_mem_functions will always give the
5859 expected result (the new set of functions is used for allocation
5860 and deallocation) at all times, regardless of platform and compiler
5863 To finish it up, some functions that were never use in any other
5864 way than through macros have a new API and new semantic:
5867 CRYPTO_dbg_realloc()
5870 All macros of value have retained their old syntax.
5871 [Richard Levitte and Bodo Moeller]
5873 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
5874 ordering of SMIMECapabilities wasn't in "strength order" and there
5875 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
5879 *) Some ASN1 types with illegal zero length encoding (INTEGER,
5880 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
5881 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
5883 *) Merge in my S/MIME library for OpenSSL. This provides a simple
5884 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
5885 functionality to handle multipart/signed properly) and a utility
5886 called 'smime' to call all this stuff. This is based on code I
5887 originally wrote for Celo who have kindly allowed it to be
5888 included in OpenSSL.
5891 *) Add variants des_set_key_checked and des_set_key_unchecked of
5892 des_set_key (aka des_key_sched). Global variable des_check_key
5893 decides which of these is called by des_set_key; this way
5894 des_check_key behaves as it always did, but applications and
5895 the library itself, which was buggy for des_check_key == 1,
5896 have a cleaner way to pick the version they need.
5899 *) New function PKCS12_newpass() which changes the password of a
5903 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
5904 dynamic mix. In both cases the ids can be used as an index into the
5905 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
5906 functions so they accept a list of the field values and the
5907 application doesn't need to directly manipulate the X509_TRUST
5911 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
5915 *) Modify the way the V3 extension code looks up extensions. This now
5916 works in a similar way to the object code: we have some "standard"
5917 extensions in a static table which is searched with OBJ_bsearch()
5918 and the application can add dynamic ones if needed. The file
5919 crypto/x509v3/ext_dat.h now has the info: this file needs to be
5920 updated whenever a new extension is added to the core code and kept
5921 in ext_nid order. There is a simple program 'tabtest.c' which checks
5922 this. New extensions are not added too often so this file can readily
5923 be maintained manually.
5925 There are two big advantages in doing things this way. The extensions
5926 can be looked up immediately and no longer need to be "added" using
5927 X509V3_add_standard_extensions(): this function now does nothing.
5928 [Side note: I get *lots* of email saying the extension code doesn't
5929 work because people forget to call this function]
5930 Also no dynamic allocation is done unless new extensions are added:
5931 so if we don't add custom extensions there is no need to call
5932 X509V3_EXT_cleanup().
5935 *) Modify enc utility's salting as follows: make salting the default. Add a
5936 magic header, so unsalted files fail gracefully instead of just decrypting
5937 to garbage. This is because not salting is a big security hole, so people
5938 should be discouraged from doing it.
5941 *) Fixes and enhancements to the 'x509' utility. It allowed a message
5942 digest to be passed on the command line but it only used this
5943 parameter when signing a certificate. Modified so all relevant
5944 operations are affected by the digest parameter including the
5945 -fingerprint and -x509toreq options. Also -x509toreq choked if a
5946 DSA key was used because it didn't fix the digest.
5949 *) Initial certificate chain verify code. Currently tests the untrusted
5950 certificates for consistency with the verify purpose (which is set
5951 when the X509_STORE_CTX structure is set up) and checks the pathlength.
5953 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
5954 this is because it will reject chains with invalid extensions whereas
5955 every previous version of OpenSSL and SSLeay made no checks at all.
5957 Trust code: checks the root CA for the relevant trust settings. Trust
5958 settings have an initial value consistent with the verify purpose: e.g.
5959 if the verify purpose is for SSL client use it expects the CA to be
5960 trusted for SSL client use. However the default value can be changed to
5961 permit custom trust settings: one example of this would be to only trust
5962 certificates from a specific "secure" set of CAs.
5964 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5965 which should be used for version portability: especially since the
5966 verify structure is likely to change more often now.
5968 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5969 to set them. If not set then assume SSL clients will verify SSL servers
5972 Two new options to the verify program: -untrusted allows a set of
5973 untrusted certificates to be passed in and -purpose which sets the
5974 intended purpose of the certificate. If a purpose is set then the
5975 new chain verify code is used to check extension consistency.
5978 *) Support for the authority information access extension.
5981 *) Modify RSA and DSA PEM read routines to transparently handle
5982 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5983 public keys in a format compatible with certificate
5984 SubjectPublicKeyInfo structures. Unfortunately there were already
5985 functions called *_PublicKey_* which used various odd formats so
5986 these are retained for compatibility: however the DSA variants were
5987 never in a public release so they have been deleted. Changed dsa/rsa
5988 utilities to handle the new format: note no releases ever handled public
5989 keys so we should be OK.
5991 The primary motivation for this change is to avoid the same fiasco
5992 that dogs private keys: there are several incompatible private key
5993 formats some of which are standard and some OpenSSL specific and
5994 require various evil hacks to allow partial transparent handling and
5995 even then it doesn't work with DER formats. Given the option anything
5996 other than PKCS#8 should be dumped: but the other formats have to
5997 stay in the name of compatibility.
5999 With public keys and the benefit of hindsight one standard format
6000 is used which works with EVP_PKEY, RSA or DSA structures: though
6001 it clearly returns an error if you try to read the wrong kind of key.
6003 Added a -pubkey option to the 'x509' utility to output the public key.
6004 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
6005 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
6006 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
6007 that do the same as the EVP_PKEY_assign_*() except they up the
6008 reference count of the added key (they don't "swallow" the
6012 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
6013 CRLs would fail if the file contained no certificates or no CRLs:
6014 added a new function to read in both types and return the number
6015 read: this means that if none are read it will be an error. The
6016 DER versions of the certificate and CRL reader would always fail
6017 because it isn't possible to mix certificates and CRLs in DER format
6018 without choking one or the other routine. Changed this to just read
6019 a certificate: this is the best we can do. Also modified the code
6020 in apps/verify.c to take notice of return codes: it was previously
6021 attempting to read in certificates from NULL pointers and ignoring
6022 any errors: this is one reason why the cert and CRL reader seemed
6023 to work. It doesn't check return codes from the default certificate
6024 routines: these may well fail if the certificates aren't installed.
6027 *) Code to support otherName option in GeneralName.
6030 *) First update to verify code. Change the verify utility
6031 so it warns if it is passed a self signed certificate:
6032 for consistency with the normal behaviour. X509_verify
6033 has been modified to it will now verify a self signed
6034 certificate if *exactly* the same certificate appears
6035 in the store: it was previously impossible to trust a
6036 single self signed certificate. This means that:
6037 openssl verify ss.pem
6038 now gives a warning about a self signed certificate but
6039 openssl verify -CAfile ss.pem ss.pem
6043 *) For servers, store verify_result in SSL_SESSION data structure
6044 (and add it to external session representation).
6045 This is needed when client certificate verifications fails,
6046 but an application-provided verification callback (set by
6047 SSL_CTX_set_cert_verify_callback) allows accepting the session
6048 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
6049 but returns 1): When the session is reused, we have to set
6050 ssl->verify_result to the appropriate error code to avoid
6052 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
6054 *) Fix a bug in the new PKCS#7 code: it didn't consider the
6055 case in PKCS7_dataInit() where the signed PKCS7 structure
6056 didn't contain any existing data because it was being created.
6057 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
6059 *) Add a salt to the key derivation routines in enc.c. This
6060 forms the first 8 bytes of the encrypted file. Also add a
6061 -S option to allow a salt to be input on the command line.
6064 *) New function X509_cmp(). Oddly enough there wasn't a function
6065 to compare two certificates. We do this by working out the SHA1
6066 hash and comparing that. X509_cmp() will be needed by the trust
6070 *) SSL_get1_session() is like SSL_get_session(), but increments
6071 the reference count in the SSL_SESSION returned.
6072 [Geoff Thorpe <geoff@eu.c2.net>]
6074 *) Fix for 'req': it was adding a null to request attributes.
6075 Also change the X509_LOOKUP and X509_INFO code to handle
6076 certificate auxiliary information.
6079 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
6083 *) Add the possibility to add extra information to the memory leak
6084 detecting output, to form tracebacks, showing from where each
6085 allocation was originated: CRYPTO_push_info("constant string") adds
6086 the string plus current file name and line number to a per-thread
6087 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
6088 is like calling CYRPTO_pop_info() until the stack is empty.
6089 Also updated memory leak detection code to be multi-thread-safe.
6092 *) Add options -text and -noout to pkcs7 utility and delete the
6093 encryption options which never did anything. Update docs.
6096 *) Add options to some of the utilities to allow the pass phrase
6097 to be included on either the command line (not recommended on
6098 OSes like Unix) or read from the environment. Update the
6099 manpages and fix a few bugs.
6102 *) Add a few manpages for some of the openssl commands.
6105 *) Fix the -revoke option in ca. It was freeing up memory twice,
6106 leaking and not finding already revoked certificates.
6109 *) Extensive changes to support certificate auxiliary information.
6110 This involves the use of X509_CERT_AUX structure and X509_AUX
6111 functions. An X509_AUX function such as PEM_read_X509_AUX()
6112 can still read in a certificate file in the usual way but it
6113 will also read in any additional "auxiliary information". By
6114 doing things this way a fair degree of compatibility can be
6115 retained: existing certificates can have this information added
6116 using the new 'x509' options.
6118 Current auxiliary information includes an "alias" and some trust
6119 settings. The trust settings will ultimately be used in enhanced
6120 certificate chain verification routines: currently a certificate
6121 can only be trusted if it is self signed and then it is trusted
6125 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
6126 The problem was that one of the replacement routines had not been working
6127 since SSLeay releases. For now the offending routine has been replaced
6128 with non-optimised assembler. Even so, this now gives around 95%
6129 performance improvement for 1024 bit RSA signs.
6132 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
6133 handling. Most clients have the effective key size in bits equal to
6134 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
6135 A few however don't do this and instead use the size of the decrypted key
6136 to determine the RC2 key length and the AlgorithmIdentifier to determine
6137 the effective key length. In this case the effective key length can still
6138 be 40 bits but the key length can be 168 bits for example. This is fixed
6139 by manually forcing an RC2 key into the EVP_PKEY structure because the
6140 EVP code can't currently handle unusual RC2 key sizes: it always assumes
6141 the key length and effective key length are equal.
6144 *) Add a bunch of functions that should simplify the creation of
6145 X509_NAME structures. Now you should be able to do:
6146 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
6147 and have it automatically work out the correct field type and fill in
6148 the structures. The more adventurous can try:
6149 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
6150 and it will (hopefully) work out the correct multibyte encoding.
6153 *) Change the 'req' utility to use the new field handling and multibyte
6154 copy routines. Before the DN field creation was handled in an ad hoc
6155 way in req, ca, and x509 which was rather broken and didn't support
6156 BMPStrings or UTF8Strings. Since some software doesn't implement
6157 BMPStrings or UTF8Strings yet, they can be enabled using the config file
6158 using the dirstring_type option. See the new comment in the default
6159 openssl.cnf for more info.
6162 *) Make crypto/rand/md_rand.c more robust:
6163 - Assure unique random numbers after fork().
6164 - Make sure that concurrent threads access the global counter and
6165 md serializably so that we never lose entropy in them
6166 or use exactly the same state in multiple threads.
6167 Access to the large state is not always serializable because
6168 the additional locking could be a performance killer, and
6169 md should be large enough anyway.
6172 *) New file apps/app_rand.c with commonly needed functionality
6173 for handling the random seed file.
6175 Use the random seed file in some applications that previously did not:
6177 dsaparam -genkey (which also ignored its '-rand' option),
6180 x509 (when signing).
6181 Except on systems with /dev/urandom, it is crucial to have a random
6182 seed file at least for key creation, DSA signing, and for DH exchanges;
6183 for RSA signatures we could do without one.
6185 gendh and gendsa (unlike genrsa) used to read only the first byte
6186 of each file listed in the '-rand' option. The function as previously
6187 found in genrsa is now in app_rand.c and is used by all programs
6188 that support '-rand'.
6191 *) In RAND_write_file, use mode 0600 for creating files;
6192 don't just chmod when it may be too late.
6195 *) Report an error from X509_STORE_load_locations
6196 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
6199 *) New function ASN1_mbstring_copy() this copies a string in either
6200 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
6201 into an ASN1_STRING type. A mask of permissible types is passed
6202 and it chooses the "minimal" type to use or an error if not type
6206 *) Add function equivalents to the various macros in asn1.h. The old
6207 macros are retained with an M_ prefix. Code inside the library can
6208 use the M_ macros. External code (including the openssl utility)
6209 should *NOT* in order to be "shared library friendly".
6212 *) Add various functions that can check a certificate's extensions
6213 to see if it usable for various purposes such as SSL client,
6214 server or S/MIME and CAs of these types. This is currently
6215 VERY EXPERIMENTAL but will ultimately be used for certificate chain
6216 verification. Also added a -purpose flag to x509 utility to
6217 print out all the purposes.
6220 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
6224 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
6225 for, obtain and decode and extension and obtain its critical flag.
6226 This allows all the necessary extension code to be handled in a
6227 single function call.
6230 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
6231 platforms. See crypto/rc4/rc4_enc.c for further details.
6234 *) New -noout option to asn1parse. This causes no output to be produced
6235 its main use is when combined with -strparse and -out to extract data
6236 from a file (which may not be in ASN.1 format).
6239 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
6240 when producing the local key id.
6241 [Richard Levitte <levitte@stacken.kth.se>]
6243 *) New option -dhparam in s_server. This allows a DH parameter file to be
6244 stated explicitly. If it is not stated then it tries the first server
6245 certificate file. The previous behaviour hard coded the filename
6249 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
6250 a public key to be input or output. For example:
6251 openssl rsa -in key.pem -pubout -out pubkey.pem
6252 Also added necessary DSA public key functions to handle this.
6255 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
6256 in the message. This was handled by allowing
6257 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
6258 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
6260 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
6261 to the end of the strings whereas this didn't. This would cause problems
6262 if strings read with d2i_ASN1_bytes() were later modified.
6263 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
6265 *) Fix for base64 decode bug. When a base64 bio reads only one line of
6266 data and it contains EOF it will end up returning an error. This is
6267 caused by input 46 bytes long. The cause is due to the way base64
6268 BIOs find the start of base64 encoded data. They do this by trying a
6269 trial decode on each line until they find one that works. When they
6270 do a flag is set and it starts again knowing it can pass all the
6271 data directly through the decoder. Unfortunately it doesn't reset
6272 the context it uses. This means that if EOF is reached an attempt
6273 is made to pass two EOFs through the context and this causes the
6274 resulting error. This can also cause other problems as well. As is
6275 usual with these problems it takes *ages* to find and the fix is
6276 trivial: move one line.
6277 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
6279 *) Ugly workaround to get s_client and s_server working under Windows. The
6280 old code wouldn't work because it needed to select() on sockets and the
6281 tty (for keypresses and to see if data could be written). Win32 only
6282 supports select() on sockets so we select() with a 1s timeout on the
6283 sockets and then see if any characters are waiting to be read, if none
6284 are present then we retry, we also assume we can always write data to
6285 the tty. This isn't nice because the code then blocks until we've
6286 received a complete line of data and it is effectively polling the
6287 keyboard at 1s intervals: however it's quite a bit better than not
6288 working at all :-) A dedicated Windows application might handle this
6289 with an event loop for example.
6292 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
6293 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
6294 will be called when RSA_sign() and RSA_verify() are used. This is useful
6295 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
6296 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
6297 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
6298 This necessitated the support of an extra signature type NID_md5_sha1
6299 for SSL signatures and modifications to the SSL library to use it instead
6300 of calling RSA_public_decrypt() and RSA_private_encrypt().
6303 *) Add new -verify -CAfile and -CApath options to the crl program, these
6304 will lookup a CRL issuers certificate and verify the signature in a
6305 similar way to the verify program. Tidy up the crl program so it
6306 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
6307 less strict. It will now permit CRL extensions even if it is not
6308 a V2 CRL: this will allow it to tolerate some broken CRLs.
6311 *) Initialize all non-automatic variables each time one of the openssl
6312 sub-programs is started (this is necessary as they may be started
6313 multiple times from the "OpenSSL>" prompt).
6314 [Lennart Bang, Bodo Moeller]
6316 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
6317 removing all other RSA functionality (this is what NO_RSA does). This
6318 is so (for example) those in the US can disable those operations covered
6319 by the RSA patent while allowing storage and parsing of RSA keys and RSA
6323 *) Non-copying interface to BIO pairs.
6324 (still largely untested)
6327 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
6328 ASCII string. This was handled independently in various places before.
6331 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
6332 UTF8 strings a character at a time.
6335 *) Use client_version from client hello to select the protocol
6336 (s23_srvr.c) and for RSA client key exchange verification
6337 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
6340 *) Add various utility functions to handle SPKACs, these were previously
6341 handled by poking round in the structure internals. Added new function
6342 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
6343 print, verify and generate SPKACs. Based on an original idea from
6344 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
6347 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
6350 *) Allow the config file extension section to be overwritten on the
6351 command line. Based on an original idea from Massimiliano Pala
6352 <madwolf@comune.modena.it>. The new option is called -extensions
6353 and can be applied to ca, req and x509. Also -reqexts to override
6354 the request extensions in req and -crlexts to override the crl extensions
6358 *) Add new feature to the SPKAC handling in ca. Now you can include
6359 the same field multiple times by preceding it by "XXXX." for example:
6362 this is the same syntax as used in the req config file.
6365 *) Allow certificate extensions to be added to certificate requests. These
6366 are specified in a 'req_extensions' option of the req section of the
6367 config file. They can be printed out with the -text option to req but
6368 are otherwise ignored at present.
6371 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
6372 data read consists of only the final block it would not decrypted because
6373 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
6374 A misplaced 'break' also meant the decrypted final block might not be
6375 copied until the next read.
6378 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
6379 a few extra parameters to the DH structure: these will be useful if
6380 for example we want the value of 'q' or implement X9.42 DH.
6383 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
6384 provides hooks that allow the default DSA functions or functions on a
6385 "per key" basis to be replaced. This allows hardware acceleration and
6386 hardware key storage to be handled without major modification to the
6387 library. Also added low level modexp hooks and CRYPTO_EX structure and
6388 associated functions.
6391 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
6392 as "read only": it can't be written to and the buffer it points to will
6393 not be freed. Reading from a read only BIO is much more efficient than
6394 a normal memory BIO. This was added because there are several times when
6395 an area of memory needs to be read from a BIO. The previous method was
6396 to create a memory BIO and write the data to it, this results in two
6397 copies of the data and an O(n^2) reading algorithm. There is a new
6398 function BIO_new_mem_buf() which creates a read only memory BIO from
6399 an area of memory. Also modified the PKCS#7 routines to use read only
6403 *) Bugfix: ssl23_get_client_hello did not work properly when called in
6404 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
6405 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
6406 but a retry condition occured while trying to read the rest.
6409 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
6410 NID_pkcs7_encrypted by default: this was wrong since this should almost
6411 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
6412 the encrypted data type: this is a more sensible place to put it and it
6413 allows the PKCS#12 code to be tidied up that duplicated this
6417 *) Changed obj_dat.pl script so it takes its input and output files on
6418 the command line. This should avoid shell escape redirection problems
6422 *) Initial support for certificate extension requests, these are included
6423 in things like Xenroll certificate requests. Included functions to allow
6424 extensions to be obtained and added.
6427 *) -crlf option to s_client and s_server for sending newlines as
6428 CRLF (as required by many protocols).
6431 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
6433 *) Install libRSAglue.a when OpenSSL is built with RSAref.
6434 [Ralf S. Engelschall]
6436 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
6437 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
6439 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
6443 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
6444 DH parameters/keys (q is lost during that conversion, but the resulting
6445 DH parameters contain its length).
6447 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
6448 much faster than DH_generate_parameters (which creates parameters
6449 where p = 2*q + 1), and also the smaller q makes DH computations
6450 much more efficient (160-bit exponentiation instead of 1024-bit
6451 exponentiation); so this provides a convenient way to support DHE
6452 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
6453 utter importance to use
6454 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6456 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6457 when such DH parameters are used, because otherwise small subgroup
6458 attacks may become possible!
6461 *) Avoid memory leak in i2d_DHparams.
6464 *) Allow the -k option to be used more than once in the enc program:
6465 this allows the same encrypted message to be read by multiple recipients.
6468 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
6469 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
6470 it will always use the numerical form of the OID, even if it has a short
6474 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
6475 method only got called if p,q,dmp1,dmq1,iqmp components were present,
6476 otherwise bn_mod_exp was called. In the case of hardware keys for example
6477 no private key components need be present and it might store extra data
6478 in the RSA structure, which cannot be accessed from bn_mod_exp.
6479 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
6480 private key operations.
6483 *) Added support for SPARC Linux.
6486 *) pem_password_cb function type incompatibly changed from
6487 typedef int pem_password_cb(char *buf, int size, int rwflag);
6489 ....(char *buf, int size, int rwflag, void *userdata);
6490 so that applications can pass data to their callbacks:
6491 The PEM[_ASN1]_{read,write}... functions and macros now take an
6492 additional void * argument, which is just handed through whenever
6493 the password callback is called.
6494 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
6496 New function SSL_CTX_set_default_passwd_cb_userdata.
6498 Compatibility note: As many C implementations push function arguments
6499 onto the stack in reverse order, the new library version is likely to
6500 interoperate with programs that have been compiled with the old
6501 pem_password_cb definition (PEM_whatever takes some data that
6502 happens to be on the stack as its last argument, and the callback
6503 just ignores this garbage); but there is no guarantee whatsoever that
6506 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
6507 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
6508 problems not only on Windows, but also on some Unix platforms.
6509 To avoid problematic command lines, these definitions are now in an
6510 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
6511 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
6514 *) MIPS III/IV assembler module is reimplemented.
6517 *) More DES library cleanups: remove references to srand/rand and
6518 delete an unused file.
6521 *) Add support for the the free Netwide assembler (NASM) under Win32,
6522 since not many people have MASM (ml) and it can be hard to obtain.
6523 This is currently experimental but it seems to work OK and pass all
6524 the tests. Check out INSTALL.W32 for info.
6527 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
6528 without temporary keys kept an extra copy of the server key,
6529 and connections with temporary keys did not free everything in case
6533 *) New function RSA_check_key and new openssl rsa option -check
6534 for verifying the consistency of RSA keys.
6535 [Ulf Moeller, Bodo Moeller]
6537 *) Various changes to make Win32 compile work:
6538 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
6539 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
6540 comparison" warnings.
6541 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
6544 *) Add a debugging option to PKCS#5 v2 key generation function: when
6545 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
6546 derived keys are printed to stderr.
6549 *) Copy the flags in ASN1_STRING_dup().
6550 [Roman E. Pavlov <pre@mo.msk.ru>]
6552 *) The x509 application mishandled signing requests containing DSA
6553 keys when the signing key was also DSA and the parameters didn't match.
6555 It was supposed to omit the parameters when they matched the signing key:
6556 the verifying software was then supposed to automatically use the CA's
6557 parameters if they were absent from the end user certificate.
6559 Omitting parameters is no longer recommended. The test was also
6560 the wrong way round! This was probably due to unusual behaviour in
6561 EVP_cmp_parameters() which returns 1 if the parameters match.
6562 This meant that parameters were omitted when they *didn't* match and
6563 the certificate was useless. Certificates signed with 'ca' didn't have
6565 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
6567 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
6568 The interface is as follows:
6569 Applications can use
6570 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
6571 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
6572 "off" is now the default.
6573 The library internally uses
6574 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
6575 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
6576 to disable memory-checking temporarily.
6578 Some inconsistent states that previously were possible (and were
6579 even the default) are now avoided.
6581 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
6582 with each memory chunk allocated; this is occasionally more helpful
6583 than just having a counter.
6585 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
6587 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
6591 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
6592 which largely parallels "options", but is for changing API behaviour,
6593 whereas "options" are about protocol behaviour.
6594 Initial "mode" flags are:
6596 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
6597 a single record has been written.
6598 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
6599 retries use the same buffer location.
6600 (But all of the contents must be
6604 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
6607 *) Fix problems with no-hmac etc.
6608 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
6610 *) New functions RSA_get_default_method(), RSA_set_method() and
6611 RSA_get_method(). These allows replacement of RSA_METHODs without having
6612 to mess around with the internals of an RSA structure.
6615 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
6616 Also really enable memory leak checks in openssl.c and in some
6618 [Chad C. Mulligan, Bodo Moeller]
6620 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
6621 up the length of negative integers. This has now been simplified to just
6622 store the length when it is first determined and use it later, rather
6623 than trying to keep track of where data is copied and updating it to
6625 [Steve Henson, reported by Brien Wheeler
6626 <bwheeler@authentica-security.com>]
6628 *) Add a new function PKCS7_signatureVerify. This allows the verification
6629 of a PKCS#7 signature but with the signing certificate passed to the
6630 function itself. This contrasts with PKCS7_dataVerify which assumes the
6631 certificate is present in the PKCS#7 structure. This isn't always the
6632 case: certificates can be omitted from a PKCS#7 structure and be
6633 distributed by "out of band" means (such as a certificate database).
6636 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
6637 function prototypes in pem.h, also change util/mkdef.pl to add the
6638 necessary function names.
6641 *) mk1mf.pl (used by Windows builds) did not properly read the
6642 options set by Configure in the top level Makefile, and Configure
6643 was not even able to write more than one option correctly.
6644 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
6647 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
6648 file to be loaded from a BIO or FILE pointer. The BIO version will
6649 for example allow memory BIOs to contain config info.
6652 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
6653 Whoever hopes to achieve shared-library compatibility across versions
6654 must use this, not the compile-time macro.
6655 (Exercise 0.9.4: Which is the minimum library version required by
6657 Note: All this applies only to multi-threaded programs, others don't
6661 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
6662 through a BIO pair triggered the default case, i.e.
6663 SSLerr(...,SSL_R_UNKNOWN_STATE).
6666 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
6667 can use the SSL library even if none of the specific BIOs is
6671 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
6672 for the encoded length.
6673 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
6675 *) Add initial documentation of the X509V3 functions.
6678 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
6679 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
6680 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
6681 secure PKCS#8 private key format with a high iteration count.
6684 *) Fix determination of Perl interpreter: A perl or perl5
6685 _directory_ in $PATH was also accepted as the interpreter.
6686 [Ralf S. Engelschall]
6688 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
6689 wrong with it but it was very old and did things like calling
6690 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
6694 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
6695 to use the new extension code.
6698 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
6699 with macros. This should make it easier to change their form, add extra
6700 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
6704 *) Add to configuration table a new entry that can specify an alternative
6705 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
6706 according to Mark Crispin <MRC@Panda.COM>.
6710 *) DES CBC did not update the IV. Weird.
6713 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
6714 Changing the behaviour of the former might break existing programs --
6715 where IV updating is needed, des_ncbc_encrypt can be used.
6718 *) When bntest is run from "make test" it drives bc to check its
6719 calculations, as well as internally checking them. If an internal check
6720 fails, it needs to cause bc to give a non-zero result or make test carries
6721 on without noticing the failure. Fixed.
6724 *) DES library cleanups.
6727 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
6728 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
6729 ciphers. NOTE: although the key derivation function has been verified
6730 against some published test vectors it has not been extensively tested
6731 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
6735 *) Instead of "mkdir -p", which is not fully portable, use new
6736 Perl script "util/mkdir-p.pl".
6739 *) Rewrite the way password based encryption (PBE) is handled. It used to
6740 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
6741 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
6742 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
6743 the 'parameter' field of the AlgorithmIdentifier is passed to the
6744 underlying key generation function so it must do its own ASN1 parsing.
6745 This has also changed the EVP_PBE_CipherInit() function which now has a
6746 'parameter' argument instead of literal salt and iteration count values
6747 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
6750 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
6751 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
6752 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
6753 KEY" because this clashed with PKCS#8 unencrypted string. Since this
6754 value was just used as a "magic string" and not used directly its
6755 value doesn't matter.
6758 *) Introduce some semblance of const correctness to BN. Shame C doesn't
6762 *) "linux-sparc64" configuration (ultrapenguin).
6763 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
6764 "linux-sparc" configuration.
6765 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
6767 *) config now generates no-xxx options for missing ciphers.
6770 *) Support the EBCDIC character set (work in progress).
6771 File ebcdic.c not yet included because it has a different license.
6772 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6774 *) Support BS2000/OSD-POSIX.
6775 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6777 *) Make callbacks for key generation use void * instead of char *.
6780 *) Make S/MIME samples compile (not yet tested).
6783 *) Additional typesafe stacks.
6786 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
6790 Changes between 0.9.3 and 0.9.3a [29 May 1999]
6792 *) New configuration variant "sco5-gcc".
6794 *) Updated some demos.
6795 [Sean O Riordain, Wade Scholine]
6797 *) Add missing BIO_free at exit of pkcs12 application.
6800 *) Fix memory leak in conf.c.
6803 *) Updates for Win32 to assembler version of MD5.
6806 *) Set #! path to perl in apps/der_chop to where we found it
6807 instead of using a fixed path.
6810 *) SHA library changes for irix64-mips4-cc.
6813 *) Improvements for VMS support.
6817 Changes between 0.9.2b and 0.9.3 [24 May 1999]
6819 *) Bignum library bug fix. IRIX 6 passes "make test" now!
6820 This also avoids the problems with SC4.2 and unpatched SC5.
6821 [Andy Polyakov <appro@fy.chalmers.se>]
6823 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
6824 These are required because of the typesafe stack would otherwise break
6825 existing code. If old code used a structure member which used to be STACK
6826 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
6827 sk_num or sk_value it would produce an error because the num, data members
6828 are not present in STACK_OF. Now it just produces a warning. sk_set
6829 replaces the old method of assigning a value to sk_value
6830 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
6831 that does this will no longer work (and should use sk_set instead) but
6832 this could be regarded as a "questionable" behaviour anyway.
6835 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
6836 correctly handle encrypted S/MIME data.
6839 *) Change type of various DES function arguments from des_cblock
6840 (which means, in function argument declarations, pointer to char)
6841 to des_cblock * (meaning pointer to array with 8 char elements),
6842 which allows the compiler to do more typechecking; it was like
6843 that back in SSLeay, but with lots of ugly casts.
6845 Introduce new type const_des_cblock.
6848 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
6849 problems: find RecipientInfo structure that matches recipient certificate
6850 and initialise the ASN1 structures properly based on passed cipher.
6853 *) Belatedly make the BN tests actually check the results.
6856 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
6857 to and from BNs: it was completely broken. New compilation option
6858 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
6859 key elements as negative integers.
6862 *) Reorganize and speed up MD5.
6863 [Andy Polyakov <appro@fy.chalmers.se>]
6866 [Richard Levitte <richard@levitte.org>]
6868 *) New option -out to asn1parse to allow the parsed structure to be
6869 output to a file. This is most useful when combined with the -strparse
6870 option to examine the output of things like OCTET STRINGS.
6873 *) Make SSL library a little more fool-proof by not requiring any longer
6874 that SSL_set_{accept,connect}_state be called before
6875 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
6876 in many applications because usually everything *appeared* to work as
6877 intended anyway -- now it really works as intended).
6880 *) Move openssl.cnf out of lib/.
6883 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
6884 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
6885 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
6886 [Ralf S. Engelschall]
6888 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
6889 handle PKCS#7 enveloped data properly.
6890 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
6892 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
6893 copying pointers. The cert_st handling is changed by this in
6894 various ways (and thus what used to be known as ctx->default_cert
6895 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
6896 any longer when s->cert does not give us what we need).
6897 ssl_cert_instantiate becomes obsolete by this change.
6898 As soon as we've got the new code right (possibly it already is?),
6899 we have solved a couple of bugs of the earlier code where s->cert
6900 was used as if it could not have been shared with other SSL structures.
6902 Note that using the SSL API in certain dirty ways now will result
6903 in different behaviour than observed with earlier library versions:
6904 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
6905 does not influence s as it used to.
6907 In order to clean up things more thoroughly, inside SSL_SESSION
6908 we don't use CERT any longer, but a new structure SESS_CERT
6909 that holds per-session data (if available); currently, this is
6910 the peer's certificate chain and, for clients, the server's certificate
6911 and temporary key. CERT holds only those values that can have
6912 meaningful defaults in an SSL_CTX.
6915 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
6916 from the internal representation. Various PKCS#7 fixes: remove some
6917 evil casts and set the enc_dig_alg field properly based on the signing
6921 *) Allow PKCS#12 password to be set from the command line or the
6922 environment. Let 'ca' get its config file name from the environment
6923 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
6927 *) Allow certificate policies extension to use an IA5STRING for the
6928 organization field. This is contrary to the PKIX definition but
6929 VeriSign uses it and IE5 only recognises this form. Document 'x509'
6933 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
6934 without disallowing inline assembler and the like for non-pedantic builds.
6937 *) Support Borland C++ builder.
6938 [Janez Jere <jj@void.si>, modified by Ulf Möller]
6943 *) SHA-1 cleanups and performance enhancements.
6944 [Andy Polyakov <appro@fy.chalmers.se>]
6946 *) Sparc v8plus assembler for the bignum library.
6947 [Andy Polyakov <appro@fy.chalmers.se>]
6949 *) Accept any -xxx and +xxx compiler options in Configure.
6952 *) Update HPUX configuration.
6955 *) Add missing sk_<type>_unshift() function to safestack.h
6956 [Ralf S. Engelschall]
6958 *) New function SSL_CTX_use_certificate_chain_file that sets the
6959 "extra_cert"s in addition to the certificate. (This makes sense
6960 only for "PEM" format files, as chains as a whole are not
6964 *) Support verify_depth from the SSL API.
6965 x509_vfy.c had what can be considered an off-by-one-error:
6966 Its depth (which was not part of the external interface)
6967 was actually counting the number of certificates in a chain;
6968 now it really counts the depth.
6971 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6972 instead of X509err, which often resulted in confusing error
6973 messages since the error codes are not globally unique
6974 (e.g. an alleged error in ssl3_accept when a certificate
6975 didn't match the private key).
6977 *) New function SSL_CTX_set_session_id_context that allows to set a default
6978 value (so that you don't need SSL_set_session_id_context for each
6979 connection using the SSL_CTX).
6982 *) OAEP decoding bug fix.
6985 *) Support INSTALL_PREFIX for package builders, as proposed by
6989 *) New Configure options "threads" and "no-threads". For systems
6990 where the proper compiler options are known (currently Solaris
6991 and Linux), "threads" is the default.
6994 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6997 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6998 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6999 such as /usr/local/bin.
7002 *) "make linux-shared" to build shared libraries.
7003 [Niels Poppe <niels@netbox.org>]
7005 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
7008 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
7009 extension adding in x509 utility.
7012 *) Remove NOPROTO sections and error code comments.
7015 *) Partial rewrite of the DEF file generator to now parse the ANSI
7019 *) New Configure options --prefix=DIR and --openssldir=DIR.
7022 *) Complete rewrite of the error code script(s). It is all now handled
7023 by one script at the top level which handles error code gathering,
7024 header rewriting and C source file generation. It should be much better
7025 than the old method: it now uses a modified version of Ulf's parser to
7026 read the ANSI prototypes in all header files (thus the old K&R definitions
7027 aren't needed for error creation any more) and do a better job of
7028 translating function codes into names. The old 'ASN1 error code imbedded
7029 in a comment' is no longer necessary and it doesn't use .err files which
7030 have now been deleted. Also the error code call doesn't have to appear all
7031 on one line (which resulted in some large lines...).
7034 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
7037 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
7038 0 (which usually indicates a closed connection), but continue reading.
7041 *) Fix some race conditions.
7044 *) Add support for CRL distribution points extension. Add Certificate
7045 Policies and CRL distribution points documentation.
7048 *) Move the autogenerated header file parts to crypto/opensslconf.h.
7051 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
7052 8 of keying material. Merlin has also confirmed interop with this fix
7053 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
7054 [Merlin Hughes <merlin@baltimore.ie>]
7056 *) Fix lots of warnings.
7057 [Richard Levitte <levitte@stacken.kth.se>]
7059 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
7060 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
7061 [Richard Levitte <levitte@stacken.kth.se>]
7063 *) Fix problems with sizeof(long) == 8.
7064 [Andy Polyakov <appro@fy.chalmers.se>]
7066 *) Change functions to ANSI C.
7069 *) Fix typos in error codes.
7070 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
7072 *) Remove defunct assembler files from Configure.
7075 *) SPARC v8 assembler BIGNUM implementation.
7076 [Andy Polyakov <appro@fy.chalmers.se>]
7078 *) Support for Certificate Policies extension: both print and set.
7079 Various additions to support the r2i method this uses.
7082 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
7083 return a const string when you are expecting an allocated buffer.
7086 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
7087 types DirectoryString and DisplayText.
7090 *) Add code to allow r2i extensions to access the configuration database,
7091 add an LHASH database driver and add several ctx helper functions.
7094 *) Fix an evil bug in bn_expand2() which caused various BN functions to
7095 fail when they extended the size of a BIGNUM.
7098 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
7099 support typesafe stack.
7102 *) Fix typo in SSL_[gs]et_options().
7103 [Nils Frostberg <nils@medcom.se>]
7105 *) Delete various functions and files that belonged to the (now obsolete)
7106 old X509V3 handling code.
7109 *) New Configure option "rsaref".
7112 *) Don't auto-generate pem.h.
7115 *) Introduce type-safe ASN.1 SETs.
7118 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
7119 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
7121 *) Introduce type-safe STACKs. This will almost certainly break lots of code
7122 that links with OpenSSL (well at least cause lots of warnings), but fear
7123 not: the conversion is trivial, and it eliminates loads of evil casts. A
7124 few STACKed things have been converted already. Feel free to convert more.
7125 In the fullness of time, I'll do away with the STACK type altogether.
7128 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
7129 specified in <certfile> by updating the entry in the index.txt file.
7130 This way one no longer has to edit the index.txt file manually for
7131 revoking a certificate. The -revoke option does the gory details now.
7132 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
7134 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
7135 `-text' option at all and this way the `-noout -text' combination was
7136 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
7137 [Ralf S. Engelschall]
7139 *) Make sure a corresponding plain text error message exists for the
7140 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
7141 verify callback function determined that a certificate was revoked.
7142 [Ralf S. Engelschall]
7144 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
7145 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
7146 all available cipers including rc5, which was forgotten until now.
7147 In order to let the testing shell script know which algorithms
7148 are available, a new (up to now undocumented) command
7149 "openssl list-cipher-commands" is used.
7152 *) Bugfix: s_client occasionally would sleep in select() when
7153 it should have checked SSL_pending() first.
7156 *) New functions DSA_do_sign and DSA_do_verify to provide access to
7157 the raw DSA values prior to ASN.1 encoding.
7160 *) Tweaks to Configure
7161 [Niels Poppe <niels@netbox.org>]
7163 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
7167 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
7170 *) New config option to avoid instructions that are illegal on the 80386.
7171 The default code is faster, but requires at least a 486.
7174 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
7175 SSL2_SERVER_VERSION (not used at all) macros, which are now the
7176 same as SSL2_VERSION anyway.
7179 *) New "-showcerts" option for s_client.
7182 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
7183 application. Various cleanups and fixes.
7186 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
7187 modify error routines to work internally. Add error codes and PBE init
7188 to library startup routines.
7191 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
7192 packing functions to asn1 and evp. Changed function names and error
7193 codes along the way.
7196 *) PKCS12 integration: and so it begins... First of several patches to
7197 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
7198 objects to objects.h
7201 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
7202 and display support for Thawte strong extranet extension.
7205 *) Add LinuxPPC support.
7206 [Jeff Dubrule <igor@pobox.org>]
7208 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
7209 bn_div_words in alpha.s.
7210 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
7212 *) Make sure the RSA OAEP test is skipped under -DRSAref because
7213 OAEP isn't supported when OpenSSL is built with RSAref.
7214 [Ulf Moeller <ulf@fitug.de>]
7216 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
7217 so they no longer are missing under -DNOPROTO.
7218 [Soren S. Jorvang <soren@t.dk>]
7221 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
7223 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
7224 doesn't work when the session is reused. Coming soon!
7227 *) Fix a security hole, that allows sessions to be reused in the wrong
7228 context thus bypassing client cert protection! All software that uses
7229 client certs and session caches in multiple contexts NEEDS PATCHING to
7230 allow session reuse! A fuller solution is in the works.
7231 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
7233 *) Some more source tree cleanups (removed obsolete files
7234 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
7235 permission on "config" script to be executable) and a fix for the INSTALL
7237 [Ulf Moeller <ulf@fitug.de>]
7239 *) Remove some legacy and erroneous uses of malloc, free instead of
7241 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
7243 *) Make rsa_oaep_test return non-zero on error.
7244 [Ulf Moeller <ulf@fitug.de>]
7246 *) Add support for native Solaris shared libraries. Configure
7247 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
7248 if someone would make that last step automatic.
7249 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
7251 *) ctx_size was not built with the right compiler during "make links". Fixed.
7254 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
7255 except NULL ciphers". This means the default cipher list will no longer
7256 enable NULL ciphers. They need to be specifically enabled e.g. with
7257 the string "DEFAULT:eNULL".
7260 *) Fix to RSA private encryption routines: if p < q then it would
7261 occasionally produce an invalid result. This will only happen with
7262 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
7265 *) Be less restrictive and allow also `perl util/perlpath.pl
7266 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
7267 because this way one can also use an interpreter named `perl5' (which is
7268 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
7269 installed as `perl').
7270 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7272 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
7273 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7275 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
7276 advapi32.lib to Win32 build and change the pem test comparision
7277 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
7278 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
7279 and crypto/des/ede_cbcm_enc.c.
7282 *) DES quad checksum was broken on big-endian architectures. Fixed.
7285 *) Comment out two functions in bio.h that aren't implemented. Fix up the
7286 Win32 test batch file so it (might) work again. The Win32 test batch file
7287 is horrible: I feel ill....
7290 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
7291 in e_os.h. Audit of header files to check ANSI and non ANSI
7292 sections: 10 functions were absent from non ANSI section and not exported
7293 from Windows DLLs. Fixed up libeay.num for new functions.
7296 *) Make `openssl version' output lines consistent.
7297 [Ralf S. Engelschall]
7299 *) Fix Win32 symbol export lists for BIO functions: Added
7300 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
7301 to ms/libeay{16,32}.def.
7302 [Ralf S. Engelschall]
7304 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
7305 fine under Unix and passes some trivial tests I've now added. But the
7306 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
7307 added to make sure no one expects that this stuff really works in the
7308 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
7309 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
7311 [Ralf S. Engelschall]
7313 *) Fix the generation of two part addresses in perl.
7314 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
7316 *) Add config entry for Linux on MIPS.
7317 [John Tobey <jtobey@channel1.com>]
7319 *) Make links whenever Configure is run, unless we are on Windoze.
7322 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
7323 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
7327 *) Add a useful kludge to allow package maintainers to specify compiler and
7328 other platforms details on the command line without having to patch the
7329 Configure script everytime: One now can use ``perl Configure
7330 <id>:<details>'', i.e. platform ids are allowed to have details appended
7331 to them (seperated by colons). This is treated as there would be a static
7332 pre-configured entry in Configure's %table under key <id> with value
7333 <details> and ``perl Configure <id>'' is called. So, when you want to
7334 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
7335 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
7336 now, which overrides the FreeBSD-elf entry on-the-fly.
7337 [Ralf S. Engelschall]
7339 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
7342 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
7343 on the `perl Configure ...' command line. This way one can compile
7344 OpenSSL libraries with Position Independent Code (PIC) which is needed
7345 for linking it into DSOs.
7346 [Ralf S. Engelschall]
7348 *) Remarkably, export ciphers were totally broken and no-one had noticed!
7352 *) Cleaned up the LICENSE document: The official contact for any license
7353 questions now is the OpenSSL core team under openssl-core@openssl.org.
7354 And add a paragraph about the dual-license situation to make sure people
7355 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
7356 to the OpenSSL toolkit.
7357 [Ralf S. Engelschall]
7359 *) General source tree makefile cleanups: Made `making xxx in yyy...'
7360 display consistent in the source tree and replaced `/bin/rm' by `rm'.
7361 Additonally cleaned up the `make links' target: Remove unnecessary
7362 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
7363 to speed processing and no longer clutter the display with confusing
7364 stuff. Instead only the actually done links are displayed.
7365 [Ralf S. Engelschall]
7367 *) Permit null encryption ciphersuites, used for authentication only. It used
7368 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
7369 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
7373 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
7374 signed attributes when verifying signatures (this would break them),
7375 the detached data encoding was wrong and public keys obtained using
7376 X509_get_pubkey() weren't freed.
7379 *) Add text documentation for the BUFFER functions. Also added a work around
7380 to a Win95 console bug. This was triggered by the password read stuff: the
7381 last character typed gets carried over to the next fread(). If you were
7382 generating a new cert request using 'req' for example then the last
7383 character of the passphrase would be CR which would then enter the first
7387 *) Added the new `Includes OpenSSL Cryptography Software' button as
7388 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
7389 button and can be used by applications based on OpenSSL to show the
7390 relationship to the OpenSSL project.
7391 [Ralf S. Engelschall]
7393 *) Remove confusing variables in function signatures in files
7394 ssl/ssl_lib.c and ssl/ssl.h.
7395 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7397 *) Don't install bss_file.c under PREFIX/include/
7398 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7400 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
7401 functions that return function pointers and has support for NT specific
7402 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
7403 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
7404 unsigned to signed types: this was killing the Win32 compile.
7407 *) Add new certificate file to stack functions,
7408 SSL_add_dir_cert_subjects_to_stack() and
7409 SSL_add_file_cert_subjects_to_stack(). These largely supplant
7410 SSL_load_client_CA_file(), and can be used to add multiple certs easily
7411 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
7412 This means that Apache-SSL and similar packages don't have to mess around
7413 to add as many CAs as they want to the preferred list.
7416 *) Experiment with doxygen documentation. Currently only partially applied to
7418 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
7419 openssl.doxy as the configuration file.
7422 *) Get rid of remaining C++-style comments which strict C compilers hate.
7423 [Ralf S. Engelschall, pointed out by Carlos Amengual]
7425 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
7426 compiled in by default: it has problems with large keys.
7429 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
7430 DH private keys and/or callback functions which directly correspond to
7431 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
7432 is needed for applications which have to configure certificates on a
7433 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
7435 For the RSA certificate situation is makes no difference, but
7436 for the DSA certificate situation this fixes the "no shared cipher"
7437 problem where the OpenSSL cipher selection procedure failed because the
7438 temporary keys were not overtaken from the context and the API provided
7439 no way to reconfigure them.
7440 The new functions now let applications reconfigure the stuff and they
7441 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
7442 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
7443 non-public-API function ssl_cert_instantiate() is used as a helper
7444 function and also to reduce code redundancy inside ssl_rsa.c.
7445 [Ralf S. Engelschall]
7447 *) Move s_server -dcert and -dkey options out of the undocumented feature
7448 area because they are useful for the DSA situation and should be
7449 recognized by the users.
7450 [Ralf S. Engelschall]
7452 *) Fix the cipher decision scheme for export ciphers: the export bits are
7453 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
7454 SSL_EXP_MASK. So, the original variable has to be used instead of the
7455 already masked variable.
7456 [Richard Levitte <levitte@stacken.kth.se>]
7458 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
7459 [Richard Levitte <levitte@stacken.kth.se>]
7461 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
7462 from `int' to `unsigned int' because it's a length and initialized by
7463 EVP_DigestFinal() which expects an `unsigned int *'.
7464 [Richard Levitte <levitte@stacken.kth.se>]
7466 *) Don't hard-code path to Perl interpreter on shebang line of Configure
7467 script. Instead use the usual Shell->Perl transition trick.
7468 [Ralf S. Engelschall]
7470 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
7471 (in addition to RSA certificates) to match the behaviour of `openssl dsa
7472 -noout -modulus' as it's already the case for `openssl rsa -noout
7473 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
7474 currently the public key is printed (a decision which was already done by
7475 `openssl dsa -modulus' in the past) which serves a similar purpose.
7476 Additionally the NO_RSA no longer completely removes the whole -modulus
7477 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
7479 [Ralf S. Engelschall]
7481 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
7482 BIO. See the source (crypto/evp/bio_ok.c) for more info.
7483 [Arne Ansper <arne@ats.cyber.ee>]
7485 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
7486 to be added. Now both 'req' and 'ca' can use new objects defined in the
7490 *) Add cool BIO that does syslog (or event log on NT).
7491 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
7493 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
7494 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
7495 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
7496 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
7499 *) Add preliminary config info for new extension code.
7502 *) Make RSA_NO_PADDING really use no padding.
7503 [Ulf Moeller <ulf@fitug.de>]
7505 *) Generate errors when private/public key check is done.
7508 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
7509 for some CRL extensions and new objects added.
7512 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
7513 key usage extension and fuller support for authority key id.
7516 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
7517 padding method for RSA, which is recommended for new applications in PKCS
7518 #1 v2.0 (RFC 2437, October 1998).
7519 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
7520 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
7521 against Bleichbacher's attack on RSA.
7522 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
7525 *) Updates to the new SSL compression code
7526 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7528 *) Fix so that the version number in the master secret, when passed
7529 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
7530 (because the server will not accept higher), that the version number
7531 is 0x03,0x01, not 0x03,0x00
7532 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7534 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
7535 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
7536 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
7539 *) Support for RAW extensions where an arbitrary extension can be
7540 created by including its DER encoding. See apps/openssl.cnf for
7544 *) Make sure latest Perl versions don't interpret some generated C array
7545 code as Perl array code in the crypto/err/err_genc.pl script.
7546 [Lars Weber <3weber@informatik.uni-hamburg.de>]
7548 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
7549 not many people have the assembler. Various Win32 compilation fixes and
7550 update to the INSTALL.W32 file with (hopefully) more accurate Win32
7554 *) Modify configure script 'Configure' to automatically create crypto/date.h
7555 file under Win32 and also build pem.h from pem.org. New script
7556 util/mkfiles.pl to create the MINFO file on environments that can't do a
7557 'make files': perl util/mkfiles.pl >MINFO should work.
7560 *) Major rework of DES function declarations, in the pursuit of correctness
7561 and purity. As a result, many evil casts evaporated, and some weirdness,
7562 too. You may find this causes warnings in your code. Zapping your evil
7563 casts will probably fix them. Mostly.
7566 *) Fix for a typo in asn1.h. Bug fix to object creation script
7567 obj_dat.pl. It considered a zero in an object definition to mean
7568 "end of object": none of the objects in objects.h have any zeros
7569 so it wasn't spotted.
7570 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
7572 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
7573 Masking (CBCM). In the absence of test vectors, the best I have been able
7574 to do is check that the decrypt undoes the encrypt, so far. Send me test
7575 vectors if you have them.
7578 *) Correct calculation of key length for export ciphers (too much space was
7579 allocated for null ciphers). This has not been tested!
7582 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
7583 message is now correct (it understands "crypto" and "ssl" on its
7584 command line). There is also now an "update" option. This will update
7585 the util/ssleay.num and util/libeay.num files with any new functions.
7587 perl util/mkdef.pl crypto ssl update
7588 it will update them.
7591 *) Overhauled the Perl interface (perl/*):
7592 - ported BN stuff to OpenSSL's different BN library
7593 - made the perl/ source tree CVS-aware
7594 - renamed the package from SSLeay to OpenSSL (the files still contain
7595 their history because I've copied them in the repository)
7596 - removed obsolete files (the test scripts will be replaced
7597 by better Test::Harness variants in the future)
7598 [Ralf S. Engelschall]
7600 *) First cut for a very conservative source tree cleanup:
7601 1. merge various obsolete readme texts into doc/ssleay.txt
7602 where we collect the old documents and readme texts.
7603 2. remove the first part of files where I'm already sure that we no
7604 longer need them because of three reasons: either they are just temporary
7605 files which were left by Eric or they are preserved original files where
7606 I've verified that the diff is also available in the CVS via "cvs diff
7607 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
7608 the crypto/md/ stuff).
7609 [Ralf S. Engelschall]
7611 *) More extension code. Incomplete support for subject and issuer alt
7612 name, issuer and authority key id. Change the i2v function parameters
7613 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
7614 what that's for :-) Fix to ASN1 macro which messed up
7615 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
7618 *) Preliminary support for ENUMERATED type. This is largely copied from the
7622 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
7623 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7625 *) Make sure `make rehash' target really finds the `openssl' program.
7626 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7628 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
7629 like to hear about it if this slows down other processors.
7632 *) Add CygWin32 platform information to Configure script.
7633 [Alan Batie <batie@aahz.jf.intel.com>]
7635 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
7636 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
7638 *) New program nseq to manipulate netscape certificate sequences
7641 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
7645 *) Fixes to BN code. Previously the default was to define BN_RECURSION
7646 but the BN code had some problems that would cause failures when
7647 doing certificate verification and some other functions.
7648 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7650 *) Add ASN1 and PEM code to support netscape certificate sequences.
7653 *) Add ASN1 and PEM code to support netscape certificate sequences.
7656 *) Add several PKIX and private extended key usage OIDs.
7659 *) Modify the 'ca' program to handle the new extension code. Modify
7660 openssl.cnf for new extension format, add comments.
7663 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
7664 and add a sample to openssl.cnf so req -x509 now adds appropriate
7668 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
7669 error code, add initial support to X509_print() and x509 application.
7672 *) Takes a deep breath and start addding X509 V3 extension support code. Add
7673 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
7674 stuff is currently isolated and isn't even compiled yet.
7677 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
7678 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
7679 Removed the versions check from X509 routines when loading extensions:
7680 this allows certain broken certificates that don't set the version
7681 properly to be processed.
7684 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
7685 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
7686 can still be regenerated with "make depend".
7689 *) Spelling mistake in C version of CAST-128.
7690 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
7692 *) Changes to the error generation code. The perl script err-code.pl
7693 now reads in the old error codes and retains the old numbers, only
7694 adding new ones if necessary. It also only changes the .err files if new
7695 codes are added. The makefiles have been modified to only insert errors
7696 when needed (to avoid needlessly modifying header files). This is done
7697 by only inserting errors if the .err file is newer than the auto generated
7698 C file. To rebuild all the error codes from scratch (the old behaviour)
7699 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
7700 or delete all the .err files.
7703 *) CAST-128 was incorrectly implemented for short keys. The C version has
7704 been fixed, but is untested. The assembler versions are also fixed, but
7705 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
7706 to regenerate it if needed.
7707 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
7708 Hagino <itojun@kame.net>]
7710 *) File was opened incorrectly in randfile.c.
7711 [Ulf Möller <ulf@fitug.de>]
7713 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
7714 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
7715 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
7716 al: it's just almost always a UTCTime. Note this patch adds new error
7717 codes so do a "make errors" if there are problems.
7720 *) Correct Linux 1 recognition in config.
7721 [Ulf Möller <ulf@fitug.de>]
7723 *) Remove pointless MD5 hash when using DSA keys in ca.
7724 [Anonymous <nobody@replay.com>]
7726 *) Generate an error if given an empty string as a cert directory. Also
7727 generate an error if handed NULL (previously returned 0 to indicate an
7728 error, but didn't set one).
7729 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
7731 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
7734 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
7735 parameters. This was causing a warning which killed off the Win32 compile.
7738 *) Remove C++ style comments from crypto/bn/bn_local.h.
7739 [Neil Costigan <neil.costigan@celocom.com>]
7741 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
7742 based on a text string, looking up short and long names and finally
7743 "dot" format. The "dot" format stuff didn't work. Added new function
7744 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
7745 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
7746 OID is not part of the table.
7749 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
7750 X509_LOOKUP_by_alias().
7753 *) Sort openssl functions by name.
7756 *) Get the gendsa program working (hopefully) and add it to app list. Remove
7757 encryption from sample DSA keys (in case anyone is interested the password
7761 *) Make _all_ *_free functions accept a NULL pointer.
7762 [Frans Heymans <fheymans@isaserver.be>]
7764 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
7766 [Anonymous <nobody@replay.com>]
7768 *) s_server should send the CAfile as acceptable CAs, not its own cert.
7769 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7771 *) Don't blow it for numeric -newkey arguments to apps/req.
7772 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7774 *) Temp key "for export" tests were wrong in s3_srvr.c.
7775 [Anonymous <nobody@replay.com>]
7777 *) Add prototype for temp key callback functions
7778 SSL_CTX_set_tmp_{rsa,dh}_callback().
7781 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
7782 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
7785 *) X509_name_add_entry() freed the wrong thing after an error.
7786 [Arne Ansper <arne@ats.cyber.ee>]
7788 *) rsa_eay.c would attempt to free a NULL context.
7789 [Arne Ansper <arne@ats.cyber.ee>]
7791 *) BIO_s_socket() had a broken should_retry() on Windoze.
7792 [Arne Ansper <arne@ats.cyber.ee>]
7794 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
7795 [Arne Ansper <arne@ats.cyber.ee>]
7797 *) Make sure the already existing X509_STORE->depth variable is initialized
7798 in X509_STORE_new(), but document the fact that this variable is still
7799 unused in the certificate verification process.
7800 [Ralf S. Engelschall]
7802 *) Fix the various library and apps files to free up pkeys obtained from
7803 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
7806 *) Fix reference counting in X509_PUBKEY_get(). This makes
7807 demos/maurice/example2.c work, amongst others, probably.
7808 [Steve Henson and Ben Laurie]
7810 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
7811 `openssl' and second, the shortcut symlinks for the `openssl <command>'
7812 are no longer created. This way we have a single and consistent command
7813 line interface `openssl <command>', similar to `cvs <command>'.
7814 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
7816 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
7817 BIT STRING wrapper always have zero unused bits.
7820 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
7823 *) Make the top-level INSTALL documentation easier to understand.
7826 *) Makefiles updated to exit if an error occurs in a sub-directory
7827 make (including if user presses ^C) [Paul Sutton]
7829 *) Make Montgomery context stuff explicit in RSA data structure.
7832 *) Fix build order of pem and err to allow for generated pem.h.
7835 *) Fix renumbering bug in X509_NAME_delete_entry().
7838 *) Enhanced the err-ins.pl script so it makes the error library number
7839 global and can add a library name. This is needed for external ASN1 and
7840 other error libraries.
7843 *) Fixed sk_insert which never worked properly.
7846 *) Fix ASN1 macros so they can handle indefinite length construted
7847 EXPLICIT tags. Some non standard certificates use these: they can now
7851 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
7852 into a single doc/ssleay.txt bundle. This way the information is still
7853 preserved but no longer messes up this directory. Now it's new room for
7854 the new set of documenation files.
7855 [Ralf S. Engelschall]
7857 *) SETs were incorrectly DER encoded. This was a major pain, because they
7858 shared code with SEQUENCEs, which aren't coded the same. This means that
7859 almost everything to do with SETs or SEQUENCEs has either changed name or
7860 number of arguments.
7861 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
7863 *) Fix test data to work with the above.
7866 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
7867 was already fixed by Eric for 0.9.1 it seems.
7868 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
7870 *) Autodetect FreeBSD3.
7873 *) Fix various bugs in Configure. This affects the following platforms:
7877 unixware-2.0-pentium
7881 *) Eliminate generated files from CVS. Reorder tests to regenerate files
7882 before they are needed.
7885 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
7889 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
7891 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
7892 changed SSLeay to OpenSSL in version strings.
7893 [Ralf S. Engelschall]
7895 *) Some fixups to the top-level documents.
7898 *) Fixed the nasty bug where rsaref.h was not found under compile-time
7899 because the symlink to include/ was missing.
7900 [Ralf S. Engelschall]
7902 *) Incorporated the popular no-RSA/DSA-only patches
7903 which allow to compile a RSA-free SSLeay.
7904 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
7906 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
7907 when "ssleay" is still not found.
7908 [Ralf S. Engelschall]
7910 *) Added more platforms to Configure: Cray T3E, HPUX 11,
7911 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
7913 *) Updated the README file.
7914 [Ralf S. Engelschall]
7916 *) Added various .cvsignore files in the CVS repository subdirs
7917 to make a "cvs update" really silent.
7918 [Ralf S. Engelschall]
7920 *) Recompiled the error-definition header files and added
7921 missing symbols to the Win32 linker tables.
7922 [Ralf S. Engelschall]
7924 *) Cleaned up the top-level documents;
7925 o new files: CHANGES and LICENSE
7926 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
7927 o merged COPYRIGHT into LICENSE
7928 o removed obsolete TODO file
7929 o renamed MICROSOFT to INSTALL.W32
7930 [Ralf S. Engelschall]
7932 *) Removed dummy files from the 0.9.1b source tree:
7933 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
7934 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
7935 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
7936 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
7937 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
7938 [Ralf S. Engelschall]
7940 *) Added various platform portability fixes.
7943 *) The Genesis of the OpenSSL rpject:
7944 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
7945 Young and Tim J. Hudson created while they were working for C2Net until
7947 [The OpenSSL Project]
7950 Changes between 0.9.0b and 0.9.1b [not released]
7952 *) Updated a few CA certificates under certs/
7955 *) Changed some BIGNUM api stuff.
7958 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
7959 DGUX x86, Linux Alpha, etc.
7962 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
7963 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7967 *) Add -strparse option to asn1pars program which parses nested
7969 [Dr Stephen Henson <shenson@bigfoot.com>]
7971 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7974 *) DSA fix for "ca" program.
7977 *) Added "-genkey" option to "dsaparam" program.
7980 *) Added RIPE MD160 (rmd160) message digest.
7983 *) Added -a (all) option to "ssleay version" command.
7986 *) Added PLATFORM define which is the id given to Configure.
7989 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7992 *) Extended the ASN.1 parser routines.
7995 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7998 *) Added a BN_CTX to the BN library.
8001 *) Fixed the weak key values in DES library
8004 *) Changed API in EVP library for cipher aliases.
8007 *) Added support for RC2/64bit cipher.
8010 *) Converted the lhash library to the crypto/mem.c functions.
8013 *) Added more recognized ASN.1 object ids.
8016 *) Added more RSA padding checks for SSL/TLS.
8019 *) Added BIO proxy/filter functionality.
8022 *) Added extra_certs to SSL_CTX which can be used
8023 send extra CA certificates to the client in the CA cert chain sending
8024 process. It can be configured with SSL_CTX_add_extra_chain_cert().
8027 *) Now Fortezza is denied in the authentication phase because
8028 this is key exchange mechanism is not supported by SSLeay at all.
8031 *) Additional PKCS1 checks.
8034 *) Support the string "TLSv1" for all TLS v1 ciphers.
8037 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
8038 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
8041 *) Fixed a few memory leaks.
8044 *) Fixed various code and comment typos.
8047 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
8048 bytes sent in the client random.
8049 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob