5 Changes between 0.9.8b and 0.9.9 [xx XXX xxxx]
7 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
8 Use correct micalg parameters depending on digest(s) in signed message.
11 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
12 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
15 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
16 an engine to register a method. Add ENGINE lookups for methods and
17 functional reference processing.
20 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
21 EVP_{Sign,Verify}* which allow an application to customise the signature
25 *) New -resign option to smime utility. This adds one or more signers
26 to an existing PKCS#7 signedData structure. Also -md option to use an
27 alternative message digest algorithm for signing.
30 *) Tidy up PKCS#7 routines and add new functions to make it easier to
31 create PKCS7 structures containing multiple signers. Update smime
32 application to support multiple signers.
35 *) New -macalg option to pkcs12 utility to allow setting of an alternative
39 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
40 Reorganize PBE internals to lookup from a static table using NIDs,
41 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
42 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
43 PRF which will be automatically used with PBES2.
46 *) Replace the algorithm specific calls to generate keys in "req" with the
50 *) Update PKCS#7 enveloped data routines to use new API. This is now
51 supported by any public key method supporting the encrypt operation. A
52 ctrl is added to allow the public key algorithm to examine or modify
53 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
57 *) Add a ctrl to asn1 method to allow a public key algorithm to express
58 a default digest type to use. In most cases this will be SHA1 but some
59 algorithms (such as GOST) need to specify an alternative digest. The
60 return value indicates how strong the prefernce is 1 means optional and
61 2 is mandatory (that is it is the only supported type). Modify
62 ASN1_item_sign() to accept a NULL digest argument to indicate it should
63 use the default md. Update openssl utilities to use the default digest
64 type for signing if it is not explicitly indicated.
67 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
68 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
69 signing method from the key type. This effectively removes the link
70 between digests and public key types.
73 *) Add an OID cross reference table and utility functions. Its purpose is to
74 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
75 rsaEncryption. This will allow some of the algorithm specific hackery
76 needed to use the correct OID to be removed.
79 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
80 structures for PKCS7_sign(). They are now set up by the relevant public
84 *) Add provisional EC pkey method with support for ECDSA and ECDH.
87 *) Add support for key derivation (agreement) in the API, DH method and
91 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
92 public and private key formats. As a side effect these add additional
93 command line functionality not previously available: DSA signatures can be
94 generated and verified using pkeyutl and DH key support and generation in
99 [Oliver Tappe <zooey@hirschkaefer.de>]
101 *) New make target "install_html_docs" installs HTML renditions of the
103 [Oliver Tappe <zooey@hirschkaefer.de>]
105 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
106 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
107 support key and parameter generation and add initial key generation
108 functionality for RSA.
111 *) Add functions for main EVP_PKEY_method operations. The undocumented
112 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
113 EVP_PKEY_{encrypt,decrypt}_old.
116 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
117 key API, doesn't do much yet.
120 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
121 public key algorithms. New option to openssl utility:
122 "list-public-key-algorithms" to print out info.
125 *) Implement the Supported Elliptic Curves Extension for
126 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
129 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
130 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
133 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
134 utilities such as rsa, dsa, dsaparam etc except they process any key
138 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
139 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
140 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
144 *) Initial support for pluggable public key ASN1.
145 De-spaghettify the public key ASN1 handling. Move public and private
146 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
147 algorithm specific handling to a single module within the relevant
148 algorithm directory. Add functions to allow (near) opaque processing
149 of public and private key structures.
152 *) Implement the Supported Point Formats Extension for
153 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
156 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
157 for the psk identity [hint] and the psk callback functions to the
158 SSL_SESSION, SSL and SSL_CTX structure.
161 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
165 SSL_CTX_use_psk_identity_hint
166 SSL_get_psk_identity_hint
168 SSL_use_psk_identity_hint
170 [Mika Kousa and Pasi Eronen of Nokia Corporation]
172 *) Add RFC 3161 compliant time stamp request creation, response generation
173 and response verification functionality.
174 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
176 *) Add initial support for TLS extensions, specifically for the server_name
177 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
178 have new members for a host name. The SSL data structure has an
179 additional member SSL_CTX *initial_ctx so that new sessions can be
180 stored in that context to allow for session resumption, even after the
181 SSL has been switched to a new SSL_CTX in reaction to a client's
182 server_name extension.
184 New functions (subject to change):
187 SSL_get_servername_type()
190 New CTRL codes and macros (subject to change):
192 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
193 - SSL_CTX_set_tlsext_servername_callback()
194 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
195 - SSL_CTX_set_tlsext_servername_arg()
196 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_hostname()
198 openssl s_client has a new '-servername ...' option.
200 openssl s_server has new options '-servername_host ...', '-cert2 ...',
201 '-key2 ...', '-servername_fatal' (subject to change). This allows
202 testing the HostName extension for a specific single host name ('-cert'
203 and '-key' remain fallbacks for handshakes without HostName
204 negotiation). If the unrecogninzed_name alert has to be sent, this by
205 default is a warning; it becomes fatal with the '-servername_fatal'
208 [Peter Sylvester, Remy Allais, Christophe Renou]
210 *) Whirlpool hash implementation is added.
213 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
214 bn(64,32). Because of instruction set limitations it doesn't have
215 any negative impact on performance. This was done mostly in order
216 to make it possible to share assembler modules, such as bn_mul_mont
217 implementations, between 32- and 64-bit builds without hassle.
220 *) Disable rogue ciphersuites:
222 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
223 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
224 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
226 The latter two were purportedly from
227 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
230 Other ciphersuites from draft-ietf-tls-56-bit-ciphersuites-01.txt
231 remain enabled for now, but are just as unofficial, and the ID
232 has long expired; these will probably disappear soon.
235 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
236 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
240 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
241 dedicated Montgomery multiplication procedure, is introduced.
242 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
243 "64-bit" performance on certain 32-bit targets.
246 *) New option SSL_OP_NO_COMP to disable use of compression selectively
247 in SSL structures. New SSL ctrl to set maximum send fragment size.
248 Save memory by seeting the I/O buffer sizes dynamically instead of
249 using the maximum available value.
252 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
253 in addition to the text details.
256 *) Very, very preliminary EXPERIMENTAL support for printing of general
257 ASN1 structures. This currently produces rather ugly output and doesn't
258 handle several customised structures at all.
261 *) Integrated support for PVK file format and some related formats such
262 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
263 these in the 'rsa' and 'dsa' utilities.
266 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
269 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
270 place for the (very old) "NETSCAPE" format certificates which are now
271 handled using new ASN1 code equivalents.
274 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
275 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
276 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
279 *) Modify CRL distribution points extension code to print out previously
280 unsupported fields. Enhance extension setting code to allow setting of
284 *) Add print and set support for Issuing Distribution Point CRL extension.
287 *) Change 'Configure' script to enable Camellia by default.
290 Changes between 0.9.8b and 0.9.8c [xx XXX xxxx]
292 *) Fix RSA blinding Heisenbug (problems sometimes occured on
293 dual-core machines) and other potential thread-safety issues.
296 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
297 versions), which is now available for royalty-free use
298 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
299 Also, add Camellia TLS ciphersuites from RFC 4132.
301 To minimize changes between patchlevels in the OpenSSL 0.9.8
302 series, Camellia remains excluded from compilation unless OpenSSL
303 is configured with 'enable-camellia'.
306 *) Disable the padding bug check when compression is in use. The padding
307 bug check assumes the first packet is of even length, this is not
308 necessarily true if compresssion is enabled and can result in false
309 positives causing handshake failure. The actual bug test is ancient
310 code so it is hoped that implementations will either have fixed it by
311 now or any which still have the bug do not support compression.
314 Changes between 0.9.8a and 0.9.8b [04 May 2006]
316 *) When applying a cipher rule check to see if string match is an explicit
317 cipher suite and only match that one cipher suite if it is.
320 *) Link in manifests for VC++ if needed.
321 [Austin Ziegler <halostatue@gmail.com>]
323 *) Update support for ECC-based TLS ciphersuites according to
324 draft-ietf-tls-ecc-12.txt with proposed changes (but without
325 TLS extensions, which are supported starting with the 0.9.9
326 branch, not in the OpenSSL 0.9.8 branch).
329 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
330 opaque EVP_CIPHER_CTX handling.
333 *) Fixes and enhancements to zlib compression code. We now only use
334 "zlib1.dll" and use the default __cdecl calling convention on Win32
335 to conform with the standards mentioned here:
336 http://www.zlib.net/DLL_FAQ.txt
337 Static zlib linking now works on Windows and the new --with-zlib-include
338 --with-zlib-lib options to Configure can be used to supply the location
339 of the headers and library. Gracefully handle case where zlib library
343 *) Several fixes and enhancements to the OID generation code. The old code
344 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
345 handle numbers larger than ULONG_MAX, truncated printing and had a
346 non standard OBJ_obj2txt() behaviour.
349 *) Add support for building of engines under engine/ as shared libraries
350 under VC++ build system.
353 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
354 Hopefully, we will not see any false combination of paths any more.
357 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
359 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
360 (part of SSL_OP_ALL). This option used to disable the
361 countermeasure against man-in-the-middle protocol-version
362 rollback in the SSL 2.0 server implementation, which is a bad
363 idea. (CVE-2005-2969)
365 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
366 for Information Security, National Institute of Advanced Industrial
367 Science and Technology [AIST], Japan)]
369 *) Add two function to clear and return the verify parameter flags.
372 *) Keep cipherlists sorted in the source instead of sorting them at
373 runtime, thus removing the need for a lock.
376 *) Avoid some small subgroup attacks in Diffie-Hellman.
377 [Nick Mathewson and Ben Laurie]
379 *) Add functions for well-known primes.
382 *) Extended Windows CE support.
383 [Satoshi Nakamura and Andy Polyakov]
385 *) Initialize SSL_METHOD structures at compile time instead of during
386 runtime, thus removing the need for a lock.
389 *) Make PKCS7_decrypt() work even if no certificate is supplied by
390 attempting to decrypt each encrypted key in turn. Add support to
394 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
396 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
399 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
402 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
403 key into the same file any more.
406 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
409 *) Add -utf8 command line and config file option to 'ca'.
410 [Stefan <stf@udoma.org]
412 *) Removed the macro des_crypt(), as it seems to conflict with some
413 libraries. Use DES_crypt().
416 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
417 involves renaming the source and generated shared-libs for
418 both. The engines will accept the corrected or legacy ids
419 ('ncipher' and '4758_cca' respectively) when binding. NB,
420 this only applies when building 'shared'.
421 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
423 *) Add attribute functions to EVP_PKEY structure. Modify
424 PKCS12_create() to recognize a CSP name attribute and
425 use it. Make -CSP option work again in pkcs12 utility.
428 *) Add new functionality to the bn blinding code:
429 - automatic re-creation of the BN_BLINDING parameters after
430 a fixed number of uses (currently 32)
431 - add new function for parameter creation
432 - introduce flags to control the update behaviour of the
433 BN_BLINDING parameters
434 - hide BN_BLINDING structure
435 Add a second BN_BLINDING slot to the RSA structure to improve
436 performance when a single RSA object is shared among several
440 *) Add support for DTLS.
441 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
443 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
444 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
447 *) Remove buggy and incompletet DH cert support from
448 ssl/ssl_rsa.c and ssl/s3_both.c
451 *) Use SHA-1 instead of MD5 as the default digest algorithm for
452 the apps/openssl applications.
455 *) Compile clean with "-Wall -Wmissing-prototypes
456 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
457 DEBUG_SAFESTACK must also be set.
460 *) Change ./Configure so that certain algorithms can be disabled by default.
461 The new counterpiece to "no-xxx" is "enable-xxx".
463 The patented RC5 and MDC2 algorithms will now be disabled unless
464 "enable-rc5" and "enable-mdc2", respectively, are specified.
466 (IDEA remains enabled despite being patented. This is because IDEA
467 is frequently required for interoperability, and there is no license
468 fee for non-commercial use. As before, "no-idea" can be used to
469 avoid this algorithm.)
473 *) Add processing of proxy certificates (see RFC 3820). This work was
474 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
475 EGEE (Enabling Grids for E-science in Europe).
478 *) RC4 performance overhaul on modern architectures/implementations, such
479 as Intel P4, IA-64 and AMD64.
482 *) New utility extract-section.pl. This can be used specify an alternative
483 section number in a pod file instead of having to treat each file as
484 a separate case in Makefile. This can be done by adding two lines to the
487 =for comment openssl_section:XXX
489 The blank line is mandatory.
493 *) New arguments -certform, -keyform and -pass for s_client and s_server
494 to allow alternative format key and certificate files and passphrase
498 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
499 update associated structures and add various utility functions.
501 Add new policy related verify parameters, include policy checking in
502 standard verify code. Enhance 'smime' application with extra parameters
503 to support policy checking and print out.
506 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
507 Nehemiah processors. These extensions support AES encryption in hardware
508 as well as RNG (though RNG support is currently disabled).
509 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
511 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
514 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
515 [Andy Polyakov and a number of other people]
517 *) Improved PowerPC platform support. Most notably BIGNUM assembler
518 implementation contributed by IBM.
519 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
521 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
522 exponent rather than 'unsigned long'. There is a corresponding change to
523 the new 'rsa_keygen' element of the RSA_METHOD structure.
524 [Jelte Jansen, Geoff Thorpe]
526 *) Functionality for creating the initial serial number file is now
527 moved from CA.pl to the 'ca' utility with a new option -create_serial.
529 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
530 number file to 1, which is bound to cause problems. To avoid
531 the problems while respecting compatibility between different 0.9.7
532 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
533 CA.pl for serial number initialization. With the new release 0.9.8,
534 we can fix the problem directly in the 'ca' utility.)
537 *) Reduced header interdepencies by declaring more opaque objects in
538 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
539 give fewer recursive includes, which could break lazy source code - so
540 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
541 developers should define this symbol when building and using openssl to
542 ensure they track the recommended behaviour, interfaces, [etc], but
543 backwards-compatible behaviour prevails when this isn't defined.
546 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
549 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
550 This will generate a random key of the appropriate length based on the
551 cipher context. The EVP_CIPHER can provide its own random key generation
552 routine to support keys of a specific form. This is used in the des and
553 3des routines to generate a key of the correct parity. Update S/MIME
554 code to use new functions and hence generate correct parity DES keys.
555 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
556 valid (weak or incorrect parity).
559 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
560 as looking them up. This is useful when the verified structure may contain
561 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
562 present unless the new PKCS7_NO_CRL flag is asserted.
565 *) Extend ASN1 oid configuration module. It now additionally accepts the
568 shortName = some long name, 1.2.3.4
571 *) Reimplemented the BN_CTX implementation. There is now no more static
572 limitation on the number of variables it can handle nor the depth of the
573 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
574 information can now expand as required, and rather than having a single
575 static array of bignums, BN_CTX now uses a linked-list of such arrays
576 allowing it to expand on demand whilst maintaining the usefulness of
580 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
581 to allow all RSA operations to function using a single BN_CTX.
584 *) Preliminary support for certificate policy evaluation and checking. This
585 is initially intended to pass the tests outlined in "Conformance Testing
586 of Relying Party Client Certificate Path Processing Logic" v1.07.
589 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
590 remained unused and not that useful. A variety of other little bignum
591 tweaks and fixes have also been made continuing on from the audit (see
595 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
596 associated ASN1, EVP and SSL functions and old ASN1 macros.
599 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
600 and this should never fail. So the return value from the use of
601 BN_set_word() (which can fail due to needless expansion) is now deprecated;
602 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
605 *) BN_CTX_get() should return zero-valued bignums, providing the same
606 initialised value as BN_new().
607 [Geoff Thorpe, suggested by Ulf Möller]
609 *) Support for inhibitAnyPolicy certificate extension.
612 *) An audit of the BIGNUM code is underway, for which debugging code is
613 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
614 is considered valid when processing BIGNUMs, and causes execution to
615 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
616 further steps are taken to deliberately pollute unused data in BIGNUM
617 structures to try and expose faulty code further on. For now, openssl will
618 (in its default mode of operation) continue to tolerate the inconsistent
619 forms that it has tolerated in the past, but authors and packagers should
620 consider trying openssl and their own applications when compiled with
621 these debugging symbols defined. It will help highlight potential bugs in
622 their own code, and will improve the test coverage for OpenSSL itself. At
623 some point, these tighter rules will become openssl's default to improve
624 maintainability, though the assert()s and other overheads will remain only
625 in debugging configurations. See bn.h for more details.
626 [Geoff Thorpe, Nils Larsch, Ulf Möller]
628 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
629 that can only be obtained through BN_CTX_new() (which implicitly
630 initialises it). The presence of this function only made it possible
631 to overwrite an existing structure (and cause memory leaks).
634 *) Because of the callback-based approach for implementing LHASH as a
635 template type, lh_insert() adds opaque objects to hash-tables and
636 lh_doall() or lh_doall_arg() are typically used with a destructor callback
637 to clean up those corresponding objects before destroying the hash table
638 (and losing the object pointers). So some over-zealous constifications in
639 LHASH have been relaxed so that lh_insert() does not take (nor store) the
640 objects as "const" and the lh_doall[_arg] callback wrappers are not
641 prototyped to have "const" restrictions on the object pointers they are
642 given (and so aren't required to cast them away any more).
645 *) The tmdiff.h API was so ugly and minimal that our own timing utility
646 (speed) prefers to use its own implementation. The two implementations
647 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
648 its object type properly exposed (MS_TM) instead of casting to/from "char
649 *". This may still change yet if someone realises MS_TM and "ms_time_***"
650 aren't necessarily the greatest nomenclatures - but this is what was used
651 internally to the implementation so I've used that for now.
654 *) Ensure that deprecated functions do not get compiled when
655 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
656 the self-tests were still using deprecated key-generation functions so
657 these have been updated also.
660 *) Reorganise PKCS#7 code to separate the digest location functionality
661 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
662 New function PKCS7_set_digest() to set the digest type for PKCS#7
663 digestedData type. Add additional code to correctly generate the
664 digestedData type and add support for this type in PKCS7 initialization
668 *) New function PKCS7_set0_type_other() this initializes a PKCS7
669 structure of type "other".
672 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
673 sure the loop does correctly stop and breaking ("division by zero")
674 modulus operations are not performed. The (pre-generated) prime
675 table crypto/bn/bn_prime.h was already correct, but it could not be
676 re-generated on some platforms because of the "division by zero"
677 situation in the script.
678 [Ralf S. Engelschall]
680 *) Update support for ECC-based TLS ciphersuites according to
681 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
682 SHA-1 now is only used for "small" curves (where the
683 representation of a field element takes up to 24 bytes); for
684 larger curves, the field element resulting from ECDH is directly
685 used as premaster secret.
686 [Douglas Stebila (Sun Microsystems Laboratories)]
688 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
689 curve secp160r1 to the tests.
690 [Douglas Stebila (Sun Microsystems Laboratories)]
692 *) Add the possibility to load symbols globally with DSO.
693 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
695 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
696 control of the error stack.
699 *) Add support for STORE in ENGINE.
702 *) Add the STORE type. The intention is to provide a common interface
703 to certificate and key stores, be they simple file-based stores, or
704 HSM-type store, or LDAP stores, or...
705 NOTE: The code is currently UNTESTED and isn't really used anywhere.
708 *) Add a generic structure called OPENSSL_ITEM. This can be used to
709 pass a list of arguments to any function as well as provide a way
710 for a function to pass data back to the caller.
713 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
714 works like BUF_strdup() but can be used to duplicate a portion of
715 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
719 *) Add the function sk_find_ex() which works like sk_find(), but will
720 return an index to an element even if an exact match couldn't be
721 found. The index is guaranteed to point at the element where the
722 searched-for key would be inserted to preserve sorting order.
725 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
726 takes an extra flags argument for optional functionality. Currently,
727 the following flags are defined:
729 OBJ_BSEARCH_VALUE_ON_NOMATCH
730 This one gets OBJ_bsearch_ex() to return a pointer to the first
731 element where the comparing function returns a negative or zero
734 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
735 This one gets OBJ_bsearch_ex() to return a pointer to the first
736 element where the comparing function returns zero. This is useful
737 if there are more than one element where the comparing function
741 *) Make it possible to create self-signed certificates with 'openssl ca'
742 in such a way that the self-signed certificate becomes part of the
743 CA database and uses the same mechanisms for serial number generation
744 as all other certificate signing. The new flag '-selfsign' enables
745 this functionality. Adapt CA.sh and CA.pl.in.
748 *) Add functionality to check the public key of a certificate request
749 against a given private. This is useful to check that a certificate
750 request can be signed by that key (self-signing).
753 *) Make it possible to have multiple active certificates with the same
754 subject in the CA index file. This is done only if the keyword
755 'unique_subject' is set to 'no' in the main CA section (default
756 if 'CA_default') of the configuration file. The value is saved
757 with the database itself in a separate index attribute file,
758 named like the index file with '.attr' appended to the name.
761 *) Generate muti valued AVAs using '+' notation in config files for
765 *) Support for nameConstraints certificate extension.
768 *) Support for policyConstraints certificate extension.
771 *) Support for policyMappings certificate extension.
774 *) Make sure the default DSA_METHOD implementation only uses its
775 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
776 and change its own handlers to be NULL so as to remove unnecessary
777 indirection. This lets alternative implementations fallback to the
778 default implementation more easily.
781 *) Support for directoryName in GeneralName related extensions
785 *) Make it possible to link applications using Makefile.shared.
786 Make that possible even when linking against static libraries!
789 *) Support for single pass processing for S/MIME signing. This now
790 means that S/MIME signing can be done from a pipe, in addition
791 cleartext signing (multipart/signed type) is effectively streaming
792 and the signed data does not need to be all held in memory.
794 This is done with a new flag PKCS7_STREAM. When this flag is set
795 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
796 is done after the data is output (and digests calculated) in
800 *) Add full support for -rpath/-R, both in shared libraries and
801 applications, at least on the platforms where it's known how
805 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
806 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
807 will now compute a table of multiples of the generator that
808 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
809 faster (notably in the case of a single point multiplication,
811 [Nils Larsch, Bodo Moeller]
813 *) IPv6 support for certificate extensions. The various extensions
814 which use the IP:a.b.c.d can now take IPv6 addresses using the
815 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
819 *) Added an ENGINE that implements RSA by performing private key
820 exponentiations with the GMP library. The conversions to and from
821 GMP's mpz_t format aren't optimised nor are any montgomery forms
822 cached, and on x86 it appears OpenSSL's own performance has caught up.
823 However there are likely to be other architectures where GMP could
824 provide a boost. This ENGINE is not built in by default, but it can be
825 specified at Configure time and should be accompanied by the necessary
826 linker additions, eg;
827 ./config -DOPENSSL_USE_GMP -lgmp
830 *) "openssl engine" will not display ENGINE/DSO load failure errors when
831 testing availability of engines with "-t" - the old behaviour is
832 produced by increasing the feature's verbosity with "-tt".
835 *) ECDSA routines: under certain error conditions uninitialized BN objects
836 could be freed. Solution: make sure initialization is performed early
837 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
841 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
842 and DH_METHOD (eg. by ENGINE implementations) to override the normal
843 software implementations. For DSA and DH, parameter generation can
844 also be overriden by providing the appropriate method callbacks.
847 *) Change the "progress" mechanism used in key-generation and
848 primality testing to functions that take a new BN_GENCB pointer in
849 place of callback/argument pairs. The new API functions have "_ex"
850 postfixes and the older functions are reimplemented as wrappers for
851 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
852 declarations of the old functions to help (graceful) attempts to
853 migrate to the new functions. Also, the new key-generation API
854 functions operate on a caller-supplied key-structure and return
855 success/failure rather than returning a key or NULL - this is to
856 help make "keygen" another member function of RSA_METHOD etc.
858 Example for using the new callback interface:
860 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
864 BN_GENCB_set(&my_cb, my_callback, my_arg);
866 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
867 /* For the meaning of a, b in calls to my_callback(), see the
868 * documentation of the function that calls the callback.
869 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
870 * my_callback should return 1 if it wants BN_is_prime_ex()
871 * to continue, or 0 to stop.
876 *) Change the ZLIB compression method to be stateful, and make it
877 available to TLS with the number defined in
878 draft-ietf-tls-compression-04.txt.
881 *) Add the ASN.1 structures and functions for CertificatePair, which
882 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
884 CertificatePair ::= SEQUENCE {
885 forward [0] Certificate OPTIONAL,
886 reverse [1] Certificate OPTIONAL,
887 -- at least one of the pair shall be present -- }
889 Also implement the PEM functions to read and write certificate
890 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
892 This needed to be defined, mostly for the sake of the LDAP
893 attribute crossCertificatePair, but may prove useful elsewhere as
897 *) Make it possible to inhibit symlinking of shared libraries in
898 Makefile.shared, for Cygwin's sake.
901 *) Extend the BIGNUM API by creating a function
902 void BN_set_negative(BIGNUM *a, int neg);
903 and a macro that behave like
904 int BN_is_negative(const BIGNUM *a);
906 to avoid the need to access 'a->neg' directly in applications.
909 *) Implement fast modular reduction for pseudo-Mersenne primes
910 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
911 EC_GROUP_new_curve_GFp() will now automatically use this
913 [Nils Larsch <nla@trustcenter.de>]
915 *) Add new lock type (CRYPTO_LOCK_BN).
918 *) Change the ENGINE framework to automatically load engines
919 dynamically from specific directories unless they could be
920 found to already be built in or loaded. Move all the
921 current engines except for the cryptodev one to a new
923 The engines in engines/ are built as shared libraries if
924 the "shared" options was given to ./Configure or ./config.
925 Otherwise, they are inserted in libcrypto.a.
926 /usr/local/ssl/engines is the default directory for dynamic
927 engines, but that can be overriden at configure time through
928 the usual use of --prefix and/or --openssldir, and at run
929 time with the environment variable OPENSSL_ENGINES.
930 [Geoff Thorpe and Richard Levitte]
932 *) Add Makefile.shared, a helper makefile to build shared
933 libraries. Addapt Makefile.org.
936 *) Add version info to Win32 DLLs.
937 [Peter 'Luna' Runestig" <peter@runestig.com>]
939 *) Add new 'medium level' PKCS#12 API. Certificates and keys
940 can be added using this API to created arbitrary PKCS#12
941 files while avoiding the low level API.
943 New options to PKCS12_create(), key or cert can be NULL and
944 will then be omitted from the output file. The encryption
945 algorithm NIDs can be set to -1 for no encryption, the mac
946 iteration count can be set to 0 to omit the mac.
948 Enhance pkcs12 utility by making the -nokeys and -nocerts
949 options work when creating a PKCS#12 file. New option -nomac
950 to omit the mac, NONE can be set for an encryption algorithm.
951 New code is modified to use the enhanced PKCS12_create()
952 instead of the low level API.
955 *) Extend ASN1 encoder to support indefinite length constructed
956 encoding. This can output sequences tags and octet strings in
957 this form. Modify pk7_asn1.c to support indefinite length
958 encoding. This is experimental and needs additional code to
959 be useful, such as an ASN1 bio and some enhanced streaming
962 Extend template encode functionality so that tagging is passed
963 down to the template encoder.
966 *) Let 'openssl req' fail if an argument to '-newkey' is not
967 recognized instead of using RSA as a default.
970 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
971 As these are not official, they are not included in "ALL";
972 the "ECCdraft" ciphersuite group alias can be used to select them.
973 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
975 *) Add ECDH engine support.
976 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
978 *) Add ECDH in new directory crypto/ecdh/.
979 [Douglas Stebila (Sun Microsystems Laboratories)]
981 *) Let BN_rand_range() abort with an error after 100 iterations
982 without success (which indicates a broken PRNG).
985 *) Change BN_mod_sqrt() so that it verifies that the input value
986 is really the square of the return value. (Previously,
987 BN_mod_sqrt would show GIGO behaviour.)
990 *) Add named elliptic curves over binary fields from X9.62, SECG,
991 and WAP/WTLS; add OIDs that were still missing.
993 [Sheueling Chang Shantz and Douglas Stebila
994 (Sun Microsystems Laboratories)]
996 *) Extend the EC library for elliptic curves over binary fields
997 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
1000 EC_GF2m_simple_method
1004 EC_GROUP_new_curve_GF2m
1005 EC_GROUP_set_curve_GF2m
1006 EC_GROUP_get_curve_GF2m
1007 EC_POINT_set_affine_coordinates_GF2m
1008 EC_POINT_get_affine_coordinates_GF2m
1009 EC_POINT_set_compressed_coordinates_GF2m
1011 Point compression for binary fields is disabled by default for
1012 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
1015 As binary polynomials are represented as BIGNUMs, various members
1016 of the EC_GROUP and EC_POINT data structures can be shared
1017 between the implementations for prime fields and binary fields;
1018 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
1019 are essentially identical to their ..._GFp counterparts.
1020 (For simplicity, the '..._GFp' prefix has been dropped from
1021 various internal method names.)
1023 An internal 'field_div' method (similar to 'field_mul' and
1024 'field_sqr') has been added; this is used only for binary fields.
1026 [Sheueling Chang Shantz and Douglas Stebila
1027 (Sun Microsystems Laboratories)]
1029 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
1030 through methods ('mul', 'precompute_mult').
1032 The generic implementations (now internally called 'ec_wNAF_mul'
1033 and 'ec_wNAF_precomputed_mult') remain the default if these
1034 methods are undefined.
1036 [Sheueling Chang Shantz and Douglas Stebila
1037 (Sun Microsystems Laboratories)]
1039 *) New function EC_GROUP_get_degree, which is defined through
1040 EC_METHOD. For curves over prime fields, this returns the bit
1041 length of the modulus.
1043 [Sheueling Chang Shantz and Douglas Stebila
1044 (Sun Microsystems Laboratories)]
1046 *) New functions EC_GROUP_dup, EC_POINT_dup.
1047 (These simply call ..._new and ..._copy).
1049 [Sheueling Chang Shantz and Douglas Stebila
1050 (Sun Microsystems Laboratories)]
1052 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
1053 Polynomials are represented as BIGNUMs (where the sign bit is not
1054 used) in the following functions [macros]:
1057 BN_GF2m_sub [= BN_GF2m_add]
1058 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
1059 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
1060 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
1062 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
1063 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
1064 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
1065 BN_GF2m_cmp [= BN_ucmp]
1067 (Note that only the 'mod' functions are actually for fields GF(2^m).
1068 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
1070 For some functions, an the irreducible polynomial defining a
1071 field can be given as an 'unsigned int[]' with strictly
1072 decreasing elements giving the indices of those bits that are set;
1073 i.e., p[] represents the polynomial
1074 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
1076 p[0] > p[1] > ... > p[k] = 0.
1077 This applies to the following functions:
1082 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
1083 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
1085 BN_GF2m_mod_sqrt_arr
1086 BN_GF2m_mod_solve_quad_arr
1090 Conversion can be performed by the following functions:
1095 bntest.c has additional tests for binary polynomial arithmetic.
1097 Two implementations for BN_GF2m_mod_div() are available.
1098 The default algorithm simply uses BN_GF2m_mod_inv() and
1099 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
1100 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
1101 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
1103 [Sheueling Chang Shantz and Douglas Stebila
1104 (Sun Microsystems Laboratories)]
1106 *) Add new error code 'ERR_R_DISABLED' that can be used when some
1107 functionality is disabled at compile-time.
1108 [Douglas Stebila <douglas.stebila@sun.com>]
1110 *) Change default behaviour of 'openssl asn1parse' so that more
1111 information is visible when viewing, e.g., a certificate:
1113 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
1114 mode the content of non-printable OCTET STRINGs is output in a
1115 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
1116 avoid the appearance of a printable string.
1117 [Nils Larsch <nla@trustcenter.de>]
1119 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
1121 EC_GROUP_set_asn1_flag()
1122 EC_GROUP_get_asn1_flag()
1123 EC_GROUP_set_point_conversion_form()
1124 EC_GROUP_get_point_conversion_form()
1125 These control ASN1 encoding details:
1126 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
1127 has been set to OPENSSL_EC_NAMED_CURVE.
1128 - Points are encoded in uncompressed form by default; options for
1129 asn1_for are as for point2oct, namely
1130 POINT_CONVERSION_COMPRESSED
1131 POINT_CONVERSION_UNCOMPRESSED
1132 POINT_CONVERSION_HYBRID
1134 Also add 'seed' and 'seed_len' members to EC_GROUP with access
1137 EC_GROUP_get0_seed()
1138 EC_GROUP_get_seed_len()
1139 This is used only for ASN1 purposes (so far).
1140 [Nils Larsch <nla@trustcenter.de>]
1142 *) Add 'field_type' member to EC_METHOD, which holds the NID
1143 of the appropriate field type OID. The new function
1144 EC_METHOD_get_field_type() returns this value.
1145 [Nils Larsch <nla@trustcenter.de>]
1150 EC_POINT_point2hex()
1151 EC_POINT_hex2point()
1152 providing useful interfaces to EC_POINT_point2oct() and
1153 EC_POINT_oct2point().
1154 [Nils Larsch <nla@trustcenter.de>]
1156 *) Change internals of the EC library so that the functions
1157 EC_GROUP_set_generator()
1158 EC_GROUP_get_generator()
1159 EC_GROUP_get_order()
1160 EC_GROUP_get_cofactor()
1161 are implemented directly in crypto/ec/ec_lib.c and not dispatched
1162 to methods, which would lead to unnecessary code duplication when
1163 adding different types of curves.
1164 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
1166 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
1167 arithmetic, and such that modified wNAFs are generated
1168 (which avoid length expansion in many cases).
1171 *) Add a function EC_GROUP_check_discriminant() (defined via
1172 EC_METHOD) that verifies that the curve discriminant is non-zero.
1174 Add a function EC_GROUP_check() that makes some sanity tests
1175 on a EC_GROUP, its generator and order. This includes
1176 EC_GROUP_check_discriminant().
1177 [Nils Larsch <nla@trustcenter.de>]
1179 *) Add ECDSA in new directory crypto/ecdsa/.
1181 Add applications 'openssl ecparam' and 'openssl ecdsa'
1182 (these are based on 'openssl dsaparam' and 'openssl dsa').
1184 ECDSA support is also included in various other files across the
1185 library. Most notably,
1186 - 'openssl req' now has a '-newkey ecdsa:file' option;
1187 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
1188 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
1189 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
1190 them suitable for ECDSA where domain parameters must be
1191 extracted before the specific public key;
1192 - ECDSA engine support has been added.
1193 [Nils Larsch <nla@trustcenter.de>]
1195 *) Include some named elliptic curves, and add OIDs from X9.62,
1196 SECG, and WAP/WTLS. Each curve can be obtained from the new
1198 EC_GROUP_new_by_curve_name(),
1199 and the list of available named curves can be obtained with
1200 EC_get_builtin_curves().
1201 Also add a 'curve_name' member to EC_GROUP objects, which can be
1203 EC_GROUP_set_curve_name()
1204 EC_GROUP_get_curve_name()
1205 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
1207 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1208 was actually never needed) and in BN_mul(). The removal in BN_mul()
1209 required a small change in bn_mul_part_recursive() and the addition
1210 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1211 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1212 bn_sub_words() and bn_add_words() except they take arrays with
1216 Changes between 0.9.7j and 0.9.7k [xx XXX xxxx]
1218 *) Fix RSA blinding Heisenbug (problems sometimes occured on
1219 dual-core machines) and other potential thread-safety issues.
1222 Changes between 0.9.7i and 0.9.7j [04 May 2006]
1224 *) Adapt fipsld and the build system to link against the validated FIPS
1225 module in FIPS mode.
1228 *) Fixes for VC++ 2005 build under Windows.
1231 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
1232 from a Windows bash shell such as MSYS. It is autodetected from the
1233 "config" script when run from a VC++ environment. Modify standard VC++
1234 build to use fipscanister.o from the GNU make build.
1237 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
1239 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
1240 The value now differs depending on if you build for FIPS or not.
1241 BEWARE! A program linked with a shared FIPSed libcrypto can't be
1242 safely run with a non-FIPSed libcrypto, as it may crash because of
1243 the difference induced by this change.
1246 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
1248 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
1249 (part of SSL_OP_ALL). This option used to disable the
1250 countermeasure against man-in-the-middle protocol-version
1251 rollback in the SSL 2.0 server implementation, which is a bad
1252 idea. (CVE-2005-2969)
1254 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
1255 for Information Security, National Institute of Advanced Industrial
1256 Science and Technology [AIST], Japan)]
1258 *) Minimal support for X9.31 signatures and PSS padding modes. This is
1259 mainly for FIPS compliance and not fully integrated at this stage.
1262 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
1263 the exponentiation using a fixed-length exponent. (Otherwise,
1264 the information leaked through timing could expose the secret key
1265 after many signatures; cf. Bleichenbacher's attack on DSA with
1269 *) Make a new fixed-window mod_exp implementation the default for
1270 RSA, DSA, and DH private-key operations so that the sequence of
1271 squares and multiplies and the memory access pattern are
1272 independent of the particular secret key. This will mitigate
1273 cache-timing and potential related attacks.
1275 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
1276 and this is automatically used by BN_mod_exp_mont() if the new flag
1277 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
1278 will use this BN flag for private exponents unless the flag
1279 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
1280 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
1282 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
1284 *) Change the client implementation for SSLv23_method() and
1285 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
1286 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
1287 (Previously, the SSL 2.0 backwards compatible Client Hello
1288 message format would be used even with SSL_OP_NO_SSLv2.)
1291 *) Add support for smime-type MIME parameter in S/MIME messages which some
1295 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
1296 a threadsafe manner. Modify rsa code to use new function and add calls
1297 to dsa and dh code (which had race conditions before).
1300 *) Include the fixed error library code in the C error file definitions
1301 instead of fixing them up at runtime. This keeps the error code
1302 structures constant.
1305 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
1307 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
1310 *) Fixes for newer kerberos headers. NB: the casts are needed because
1311 the 'length' field is signed on one version and unsigned on another
1312 with no (?) obvious way to tell the difference, without these VC++
1313 complains. Also the "definition" of FAR (blank) is no longer included
1314 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
1315 some needed definitions.
1318 *) Undo Cygwin change.
1321 *) Added support for proxy certificates according to RFC 3820.
1322 Because they may be a security thread to unaware applications,
1323 they must be explicitely allowed in run-time. See
1324 docs/HOWTO/proxy_certificates.txt for further information.
1327 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
1329 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
1330 server and client random values. Previously
1331 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
1332 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
1334 This change has negligible security impact because:
1336 1. Server and client random values still have 24 bytes of pseudo random
1339 2. Server and client random values are sent in the clear in the initial
1342 3. The master secret is derived using the premaster secret (48 bytes in
1343 size for static RSA ciphersuites) as well as client server and random
1346 The OpenSSL team would like to thank the UK NISCC for bringing this issue
1349 [Stephen Henson, reported by UK NISCC]
1351 *) Use Windows randomness collection on Cygwin.
1354 *) Fix hang in EGD/PRNGD query when communication socket is closed
1355 prematurely by EGD/PRNGD.
1356 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
1358 *) Prompt for pass phrases when appropriate for PKCS12 input format.
1361 *) Back-port of selected performance improvements from development
1362 branch, as well as improved support for PowerPC platforms.
1365 *) Add lots of checks for memory allocation failure, error codes to indicate
1366 failure and freeing up memory if a failure occurs.
1367 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
1369 *) Add new -passin argument to dgst.
1372 *) Perform some character comparisons of different types in X509_NAME_cmp:
1373 this is needed for some certificates that reencode DNs into UTF8Strings
1374 (in violation of RFC3280) and can't or wont issue name rollover
1378 *) Make an explicit check during certificate validation to see that
1379 the CA setting in each certificate on the chain is correct. As a
1380 side effect always do the following basic checks on extensions,
1381 not just when there's an associated purpose to the check:
1383 - if there is an unhandled critical extension (unless the user
1384 has chosen to ignore this fault)
1385 - if the path length has been exceeded (if one is set at all)
1386 - that certain extensions fit the associated purpose (if one has
1390 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
1392 *) Avoid a race condition when CRLs are checked in a multi threaded
1393 environment. This would happen due to the reordering of the revoked
1394 entries during signature checking and serial number lookup. Now the
1395 encoding is cached and the serial number sort performed under a lock.
1396 Add new STACK function sk_is_sorted().
1399 *) Add Delta CRL to the extension code.
1402 *) Various fixes to s3_pkt.c so alerts are sent properly.
1403 [David Holmes <d.holmes@f5.com>]
1405 *) Reduce the chances of duplicate issuer name and serial numbers (in
1406 violation of RFC3280) using the OpenSSL certificate creation utilities.
1407 This is done by creating a random 64 bit value for the initial serial
1408 number when a serial number file is created or when a self signed
1409 certificate is created using 'openssl req -x509'. The initial serial
1410 number file is created using 'openssl x509 -next_serial' in CA.pl
1411 rather than being initialized to 1.
1414 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
1416 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
1417 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
1418 [Joe Orton, Steve Henson]
1420 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
1422 [Joe Orton, Steve Henson]
1424 *) Make it possible to have multiple active certificates with the same
1425 subject in the CA index file. This is done only if the keyword
1426 'unique_subject' is set to 'no' in the main CA section (default
1427 if 'CA_default') of the configuration file. The value is saved
1428 with the database itself in a separate index attribute file,
1429 named like the index file with '.attr' appended to the name.
1432 *) X509 verify fixes. Disable broken certificate workarounds when
1433 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
1434 keyUsage extension present. Don't accept CRLs with unhandled critical
1435 extensions: since verify currently doesn't process CRL extensions this
1436 rejects a CRL with *any* critical extensions. Add new verify error codes
1440 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
1441 A clarification of RFC2560 will require the use of OCTET STRINGs and
1442 some implementations cannot handle the current raw format. Since OpenSSL
1443 copies and compares OCSP nonces as opaque blobs without any attempt at
1444 parsing them this should not create any compatibility issues.
1447 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
1448 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
1449 this HMAC (and other) operations are several times slower than OpenSSL
1453 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
1454 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1456 *) Use the correct content when signing type "other".
1459 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
1461 *) Fix various bugs revealed by running the NISCC test suite:
1463 Stop out of bounds reads in the ASN1 code when presented with
1464 invalid tags (CVE-2003-0543 and CVE-2003-0544).
1466 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
1468 If verify callback ignores invalid public key errors don't try to check
1469 certificate signature with the NULL public key.
1473 *) New -ignore_err option in ocsp application to stop the server
1474 exiting on the first error in a request.
1477 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
1478 if the server requested one: as stated in TLS 1.0 and SSL 3.0
1482 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
1483 extra data after the compression methods not only for TLS 1.0
1484 but also for SSL 3.0 (as required by the specification).
1485 [Bodo Moeller; problem pointed out by Matthias Loepfe]
1487 *) Change X509_certificate_type() to mark the key as exported/exportable
1488 when it's 512 *bits* long, not 512 bytes.
1491 *) Change AES_cbc_encrypt() so it outputs exact multiple of
1492 blocks during encryption.
1495 *) Various fixes to base64 BIO and non blocking I/O. On write
1496 flushes were not handled properly if the BIO retried. On read
1497 data was not being buffered properly and had various logic bugs.
1498 This also affects blocking I/O when the data being decoded is a
1502 *) Various S/MIME bugfixes and compatibility changes:
1503 output correct application/pkcs7 MIME type if
1504 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
1505 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
1506 of files as .eml work). Correctly handle very long lines in MIME
1510 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
1512 *) Countermeasure against the Klima-Pokorny-Rosa extension of
1513 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
1514 a protocol version number mismatch like a decryption error
1515 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
1518 *) Turn on RSA blinding by default in the default implementation
1519 to avoid a timing attack. Applications that don't want it can call
1520 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
1521 They would be ill-advised to do so in most cases.
1522 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
1524 *) Change RSA blinding code so that it works when the PRNG is not
1525 seeded (in this case, the secret RSA exponent is abused as
1526 an unpredictable seed -- if it is not unpredictable, there
1527 is no point in blinding anyway). Make RSA blinding thread-safe
1528 by remembering the creator's thread ID in rsa->blinding and
1529 having all other threads use local one-time blinding factors
1530 (this requires more computation than sharing rsa->blinding, but
1531 avoids excessive locking; and if an RSA object is not shared
1532 between threads, blinding will still be very fast).
1535 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
1536 ENGINE as defaults for all supported algorithms irrespective of
1537 the 'flags' parameter. 'flags' is now honoured, so applications
1538 should make sure they are passing it correctly.
1541 *) Target "mingw" now allows native Windows code to be generated in
1542 the Cygwin environment as well as with the MinGW compiler.
1545 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
1547 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
1548 via timing by performing a MAC computation even if incorrrect
1549 block cipher padding has been found. This is a countermeasure
1550 against active attacks where the attacker has to distinguish
1551 between bad padding and a MAC verification error. (CVE-2003-0078)
1553 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
1554 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
1555 Martin Vuagnoux (EPFL, Ilion)]
1557 *) Make the no-err option work as intended. The intention with no-err
1558 is not to have the whole error stack handling routines removed from
1559 libcrypto, it's only intended to remove all the function name and
1560 reason texts, thereby removing some of the footprint that may not
1561 be interesting if those errors aren't displayed anyway.
1563 NOTE: it's still possible for any application or module to have it's
1564 own set of error texts inserted. The routines are there, just not
1565 used by default when no-err is given.
1568 *) Add support for FreeBSD on IA64.
1569 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
1571 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
1572 Kerberos function mit_des_cbc_cksum(). Before this change,
1573 the value returned by DES_cbc_cksum() was like the one from
1574 mit_des_cbc_cksum(), except the bytes were swapped.
1575 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
1577 *) Allow an application to disable the automatic SSL chain building.
1578 Before this a rather primitive chain build was always performed in
1579 ssl3_output_cert_chain(): an application had no way to send the
1580 correct chain if the automatic operation produced an incorrect result.
1582 Now the chain builder is disabled if either:
1584 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
1586 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
1588 The reasoning behind this is that an application would not want the
1589 auto chain building to take place if extra chain certificates are
1590 present and it might also want a means of sending no additional
1591 certificates (for example the chain has two certificates and the
1595 *) Add the possibility to build without the ENGINE framework.
1596 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1598 *) Under Win32 gmtime() can return NULL: check return value in
1599 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
1602 *) DSA routines: under certain error conditions uninitialized BN objects
1603 could be freed. Solution: make sure initialization is performed early
1604 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
1605 Nils Larsch <nla@trustcenter.de> via PR#459)
1608 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
1609 checked on reconnect on the client side, therefore session resumption
1610 could still fail with a "ssl session id is different" error. This
1611 behaviour is masked when SSL_OP_ALL is used due to
1612 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
1613 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1614 followup to PR #377.
1617 *) IA-32 assembler support enhancements: unified ELF targets, support
1618 for SCO/Caldera platforms, fix for Cygwin shared build.
1621 *) Add support for FreeBSD on sparc64. As a consequence, support for
1622 FreeBSD on non-x86 processors is separate from x86 processors on
1623 the config script, much like the NetBSD support.
1624 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
1626 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
1628 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
1631 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
1632 code (06) was taken as the first octet of the session ID and the last
1633 octet was ignored consequently. As a result SSLv2 client side session
1634 caching could not have worked due to the session ID mismatch between
1636 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1640 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
1641 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
1645 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
1646 seems that in spite of existing for more than a year, many application
1647 author have done nothing to provide the necessary callbacks, which
1648 means that this particular engine will not work properly anywhere.
1649 This is a very unfortunate situation which forces us, in the name
1650 of usability, to give the hw_ncipher.c a static lock, which is part
1652 NOTE: This is for the 0.9.7 series ONLY. This hack will never
1653 appear in 0.9.8 or later. We EXPECT application authors to have
1654 dealt properly with this when 0.9.8 is released (unless we actually
1655 make such changes in the libcrypto locking code that changes will
1656 have to be made anyway).
1659 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
1660 octets have been read, EOF or an error occurs. Without this change
1661 some truncated ASN1 structures will not produce an error.
1664 *) Disable Heimdal support, since it hasn't been fully implemented.
1665 Still give the possibility to force the use of Heimdal, but with
1666 warnings and a request that patches get sent to openssl-dev.
1669 *) Add the VC-CE target, introduce the WINCE sysname, and add
1670 INSTALL.WCE and appropriate conditionals to make it build.
1671 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1673 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
1674 cygssl-x.y.z.dll, where x, y and z are the major, minor and
1675 edit numbers of the version.
1676 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1678 *) Introduce safe string copy and catenation functions
1679 (BUF_strlcpy() and BUF_strlcat()).
1680 [Ben Laurie (CHATS) and Richard Levitte]
1682 *) Avoid using fixed-size buffers for one-line DNs.
1683 [Ben Laurie (CHATS)]
1685 *) Add BUF_MEM_grow_clean() to avoid information leakage when
1686 resizing buffers containing secrets, and use where appropriate.
1687 [Ben Laurie (CHATS)]
1689 *) Avoid using fixed size buffers for configuration file location.
1690 [Ben Laurie (CHATS)]
1692 *) Avoid filename truncation for various CA files.
1693 [Ben Laurie (CHATS)]
1695 *) Use sizeof in preference to magic numbers.
1696 [Ben Laurie (CHATS)]
1698 *) Avoid filename truncation in cert requests.
1699 [Ben Laurie (CHATS)]
1701 *) Add assertions to check for (supposedly impossible) buffer
1703 [Ben Laurie (CHATS)]
1705 *) Don't cache truncated DNS entries in the local cache (this could
1706 potentially lead to a spoofing attack).
1707 [Ben Laurie (CHATS)]
1709 *) Fix various buffers to be large enough for hex/decimal
1710 representations in a platform independent manner.
1711 [Ben Laurie (CHATS)]
1713 *) Add CRYPTO_realloc_clean() to avoid information leakage when
1714 resizing buffers containing secrets, and use where appropriate.
1715 [Ben Laurie (CHATS)]
1717 *) Add BIO_indent() to avoid much slightly worrying code to do
1719 [Ben Laurie (CHATS)]
1721 *) Convert sprintf()/BIO_puts() to BIO_printf().
1722 [Ben Laurie (CHATS)]
1724 *) buffer_gets() could terminate with the buffer only half
1726 [Ben Laurie (CHATS)]
1728 *) Add assertions to prevent user-supplied crypto functions from
1729 overflowing internal buffers by having large block sizes, etc.
1730 [Ben Laurie (CHATS)]
1732 *) New OPENSSL_assert() macro (similar to assert(), but enabled
1734 [Ben Laurie (CHATS)]
1736 *) Eliminate unused copy of key in RC4.
1737 [Ben Laurie (CHATS)]
1739 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
1740 [Ben Laurie (CHATS)]
1742 *) Fix off-by-one error in EGD path.
1743 [Ben Laurie (CHATS)]
1745 *) If RANDFILE path is too long, ignore instead of truncating.
1746 [Ben Laurie (CHATS)]
1748 *) Eliminate unused and incorrectly sized X.509 structure
1750 [Ben Laurie (CHATS)]
1752 *) Eliminate unused and dangerous function knumber().
1753 [Ben Laurie (CHATS)]
1755 *) Eliminate unused and dangerous structure, KSSL_ERR.
1756 [Ben Laurie (CHATS)]
1758 *) Protect against overlong session ID context length in an encoded
1759 session object. Since these are local, this does not appear to be
1761 [Ben Laurie (CHATS)]
1763 *) Change from security patch (see 0.9.6e below) that did not affect
1764 the 0.9.6 release series:
1766 Remote buffer overflow in SSL3 protocol - an attacker could
1767 supply an oversized master key in Kerberos-enabled versions.
1769 [Ben Laurie (CHATS)]
1771 *) Change the SSL kerb5 codes to match RFC 2712.
1774 *) Make -nameopt work fully for req and add -reqopt switch.
1775 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1777 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1778 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1780 *) Make sure tests can be performed even if the corresponding algorithms
1781 have been removed entirely. This was also the last step to make
1782 OpenSSL compilable with DJGPP under all reasonable conditions.
1783 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1785 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1786 to allow version independent disabling of normally unselected ciphers,
1787 which may be activated as a side-effect of selecting a single cipher.
1789 (E.g., cipher list string "RSA" enables ciphersuites that are left
1790 out of "ALL" because they do not provide symmetric encryption.
1791 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1792 [Lutz Jaenicke, Bodo Moeller]
1794 *) Add appropriate support for separate platform-dependent build
1795 directories. The recommended way to make a platform-dependent
1796 build directory is the following (tested on Linux), maybe with
1799 # Place yourself outside of the OpenSSL source tree. In
1800 # this example, the environment variable OPENSSL_SOURCE
1801 # is assumed to contain the absolute OpenSSL source directory.
1802 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1803 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1804 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1805 mkdir -p `dirname $F`
1806 ln -s $OPENSSL_SOURCE/$F $F
1809 To be absolutely sure not to disturb the source tree, a "make clean"
1810 is a good thing. If it isn't successfull, don't worry about it,
1811 it probably means the source directory is very clean.
1814 *) Make sure any ENGINE control commands make local copies of string
1815 pointers passed to them whenever necessary. Otherwise it is possible
1816 the caller may have overwritten (or deallocated) the original string
1817 data when a later ENGINE operation tries to use the stored values.
1818 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1820 *) Improve diagnostics in file reading and command-line digests.
1821 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1823 *) Add AES modes CFB and OFB to the object database. Correct an
1824 error in AES-CFB decryption.
1827 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1828 allows existing EVP_CIPHER_CTX structures to be reused after
1829 calling EVP_*Final(). This behaviour is used by encryption
1830 BIOs and some applications. This has the side effect that
1831 applications must explicitly clean up cipher contexts with
1832 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1835 *) Check the values of dna and dnb in bn_mul_recursive before calling
1836 bn_mul_comba (a non zero value means the a or b arrays do not contain
1837 n2 elements) and fallback to bn_mul_normal if either is not zero.
1840 *) Fix escaping of non-ASCII characters when using the -subj option
1841 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1844 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1845 form for "surname", serialNumber has no short form.
1846 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1847 therefore remove "mail" short name for "internet 7".
1848 The OID for unique identifiers in X509 certificates is
1849 x500UniqueIdentifier, not uniqueIdentifier.
1850 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1853 *) Add an "init" command to the ENGINE config module and auto initialize
1854 ENGINEs. Without any "init" command the ENGINE will be initialized
1855 after all ctrl commands have been executed on it. If init=1 the
1856 ENGINE is initailized at that point (ctrls before that point are run
1857 on the uninitialized ENGINE and after on the initialized one). If
1858 init=0 then the ENGINE will not be iniatialized at all.
1861 *) Fix the 'app_verify_callback' interface so that the user-defined
1862 argument is actually passed to the callback: In the
1863 SSL_CTX_set_cert_verify_callback() prototype, the callback
1864 declaration has been changed from
1867 int (*cb)(X509_STORE_CTX *,void *);
1868 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1869 i=s->ctx->app_verify_callback(&ctx)
1870 has been changed into
1871 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1873 To update applications using SSL_CTX_set_cert_verify_callback(),
1874 a dummy argument can be added to their callback functions.
1875 [D. K. Smetters <smetters@parc.xerox.com>]
1877 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1878 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1880 *) Add and OPENSSL_LOAD_CONF define which will cause
1881 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1882 This allows older applications to transparently support certain
1883 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1884 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1885 load the config file and OPENSSL_add_all_algorithms_conf() which will
1886 always load it have also been added.
1889 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1890 Adjust NIDs and EVP layer.
1891 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1893 *) Config modules support in openssl utility.
1895 Most commands now load modules from the config file,
1896 though in a few (such as version) this isn't done
1897 because it couldn't be used for anything.
1899 In the case of ca and req the config file used is
1900 the same as the utility itself: that is the -config
1901 command line option can be used to specify an
1905 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1906 use "openssl_conf" if filename is NULL use default openssl config file.
1909 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1910 config section name. Add a new flag to tolerate a missing config file
1911 and move code to CONF_modules_load_file().
1914 *) Support for crypto accelerator cards from Accelerated Encryption
1915 Processing, www.aep.ie. (Use engine 'aep')
1916 The support was copied from 0.9.6c [engine] and adapted/corrected
1917 to work with the new engine framework.
1918 [AEP Inc. and Richard Levitte]
1920 *) Support for SureWare crypto accelerator cards from Baltimore
1921 Technologies. (Use engine 'sureware')
1922 The support was copied from 0.9.6c [engine] and adapted
1923 to work with the new engine framework.
1926 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1927 make the newer ENGINE framework commands for the CHIL engine work.
1928 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1930 *) Make it possible to produce shared libraries on ReliantUNIX.
1931 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1933 *) Add the configuration target debug-linux-ppro.
1934 Make 'openssl rsa' use the general key loading routines
1935 implemented in apps.c, and make those routines able to
1936 handle the key format FORMAT_NETSCAPE and the variant
1938 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1940 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1941 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1943 *) Add -keyform to rsautl, and document -engine.
1944 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1946 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1947 BIO_R_NO_SUCH_FILE error code rather than the generic
1948 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1951 *) Add new functions
1953 ERR_peek_last_error_line
1954 ERR_peek_last_error_line_data.
1955 These are similar to
1958 ERR_peek_error_line_data,
1959 but report on the latest error recorded rather than the first one
1960 still in the error queue.
1961 [Ben Laurie, Bodo Moeller]
1963 *) default_algorithms option in ENGINE config module. This allows things
1965 default_algorithms = ALL
1966 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
1969 *) Prelminary ENGINE config module.
1972 *) New experimental application configuration code.
1975 *) Change the AES code to follow the same name structure as all other
1976 symmetric ciphers, and behave the same way. Move everything to
1977 the directory crypto/aes, thereby obsoleting crypto/rijndael.
1978 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1980 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
1981 [Ben Laurie and Theo de Raadt]
1983 *) Add option to output public keys in req command.
1984 [Massimiliano Pala madwolf@openca.org]
1986 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
1987 (up to about 10% better than before for P-192 and P-224).
1990 *) New functions/macros
1992 SSL_CTX_set_msg_callback(ctx, cb)
1993 SSL_CTX_set_msg_callback_arg(ctx, arg)
1994 SSL_set_msg_callback(ssl, cb)
1995 SSL_set_msg_callback_arg(ssl, arg)
1997 to request calling a callback function
1999 void cb(int write_p, int version, int content_type,
2000 const void *buf, size_t len, SSL *ssl, void *arg)
2002 whenever a protocol message has been completely received
2003 (write_p == 0) or sent (write_p == 1). Here 'version' is the
2004 protocol version according to which the SSL library interprets
2005 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
2006 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
2007 the content type as defined in the SSL 3.0/TLS 1.0 protocol
2008 specification (change_cipher_spec(20), alert(21), handshake(22)).
2009 'buf' and 'len' point to the actual message, 'ssl' to the
2010 SSL object, and 'arg' is the application-defined value set by
2011 SSL[_CTX]_set_msg_callback_arg().
2013 'openssl s_client' and 'openssl s_server' have new '-msg' options
2014 to enable a callback that displays all protocol messages.
2017 *) Change the shared library support so shared libraries are built as
2018 soon as the corresponding static library is finished, and thereby get
2019 openssl and the test programs linked against the shared library.
2020 This still only happens when the keyword "shard" has been given to
2021 the configuration scripts.
2023 NOTE: shared library support is still an experimental thing, and
2024 backward binary compatibility is still not guaranteed.
2025 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
2027 *) Add support for Subject Information Access extension.
2028 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
2030 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
2031 additional bytes when new memory had to be allocated, not just
2032 when reusing an existing buffer.
2035 *) New command line and configuration option 'utf8' for the req command.
2036 This allows field values to be specified as UTF8 strings.
2039 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
2040 runs for the former and machine-readable output for the latter.
2043 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
2044 of the e-mail address in the DN (i.e., it will go into a certificate
2045 extension only). The new configuration file option 'email_in_dn = no'
2046 has the same effect.
2047 [Massimiliano Pala madwolf@openca.org]
2049 *) Change all functions with names starting with des_ to be starting
2050 with DES_ instead. Add wrappers that are compatible with libdes,
2051 but are named _ossl_old_des_*. Finally, add macros that map the
2052 des_* symbols to the corresponding _ossl_old_des_* if libdes
2053 compatibility is desired. If OpenSSL 0.9.6c compatibility is
2054 desired, the des_* symbols will be mapped to DES_*, with one
2057 Since we provide two compatibility mappings, the user needs to
2058 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
2059 compatibility is desired. The default (i.e., when that macro
2060 isn't defined) is OpenSSL 0.9.6c compatibility.
2062 There are also macros that enable and disable the support of old
2063 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
2064 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
2065 are defined, the default will apply: to support the old des routines.
2067 In either case, one must include openssl/des.h to get the correct
2068 definitions. Do not try to just include openssl/des_old.h, that
2071 NOTE: This is a major break of an old API into a new one. Software
2072 authors are encouraged to switch to the DES_ style functions. Some
2073 time in the future, des_old.h and the libdes compatibility functions
2074 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
2075 default), and then completely removed.
2078 *) Test for certificates which contain unsupported critical extensions.
2079 If such a certificate is found during a verify operation it is
2080 rejected by default: this behaviour can be overridden by either
2081 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
2082 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
2083 X509_supported_extension() has also been added which returns 1 if a
2084 particular extension is supported.
2087 *) Modify the behaviour of EVP cipher functions in similar way to digests
2088 to retain compatibility with existing code.
2091 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
2092 compatibility with existing code. In particular the 'ctx' parameter does
2093 not have to be to be initialized before the call to EVP_DigestInit() and
2094 it is tidied up after a call to EVP_DigestFinal(). New function
2095 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
2096 EVP_MD_CTX_copy() changed to not require the destination to be
2097 initialized valid and new function EVP_MD_CTX_copy_ex() added which
2098 requires the destination to be valid.
2100 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
2101 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
2104 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
2105 so that complete 'Handshake' protocol structures are kept in memory
2106 instead of overwriting 'msg_type' and 'length' with 'body' data.
2109 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
2110 [Massimo Santin via Richard Levitte]
2112 *) Major restructuring to the underlying ENGINE code. This includes
2113 reduction of linker bloat, separation of pure "ENGINE" manipulation
2114 (initialisation, etc) from functionality dealing with implementations
2115 of specific crypto iterfaces. This change also introduces integrated
2116 support for symmetric ciphers and digest implementations - so ENGINEs
2117 can now accelerate these by providing EVP_CIPHER and EVP_MD
2118 implementations of their own. This is detailed in crypto/engine/README
2119 as it couldn't be adequately described here. However, there are a few
2120 API changes worth noting - some RSA, DSA, DH, and RAND functions that
2121 were changed in the original introduction of ENGINE code have now
2122 reverted back - the hooking from this code to ENGINE is now a good
2123 deal more passive and at run-time, operations deal directly with
2124 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
2125 dereferencing through an ENGINE pointer any more. Also, the ENGINE
2126 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
2127 they were not being used by the framework as there is no concept of a
2128 BIGNUM_METHOD and they could not be generalised to the new
2129 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
2130 ENGINE_cpy() has been removed as it cannot be consistently defined in
2134 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
2137 *) Change mkdef.pl to sort symbols that get the same entry number,
2138 and make sure the automatically generated functions ERR_load_*
2139 become part of libeay.num as well.
2142 *) New function SSL_renegotiate_pending(). This returns true once
2143 renegotiation has been requested (either SSL_renegotiate() call
2144 or HelloRequest/ClientHello receveived from the peer) and becomes
2145 false once a handshake has been completed.
2146 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
2147 sends a HelloRequest, but does not ensure that a handshake takes
2148 place. SSL_renegotiate_pending() is useful for checking if the
2149 client has followed the request.)
2152 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
2153 By default, clients may request session resumption even during
2154 renegotiation (if session ID contexts permit); with this option,
2155 session resumption is possible only in the first handshake.
2157 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
2158 more bits available for options that should not be part of
2159 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
2162 *) Add some demos for certificate and certificate request creation.
2165 *) Make maximum certificate chain size accepted from the peer application
2166 settable (SSL*_get/set_max_cert_list()), as proposed by
2167 "Douglas E. Engert" <deengert@anl.gov>.
2170 *) Add support for shared libraries for Unixware-7
2171 (Boyd Lynn Gerber <gerberb@zenez.com>).
2174 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
2175 be done prior to destruction. Use this to unload error strings from
2176 ENGINEs that load their own error strings. NB: This adds two new API
2177 functions to "get" and "set" this destroy handler in an ENGINE.
2180 *) Alter all existing ENGINE implementations (except "openssl" and
2181 "openbsd") to dynamically instantiate their own error strings. This
2182 makes them more flexible to be built both as statically-linked ENGINEs
2183 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
2184 Also, add stub code to each that makes building them as self-contained
2185 shared-libraries easier (see README.ENGINE).
2188 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
2189 implementations into applications that are completely implemented in
2190 self-contained shared-libraries. The "dynamic" ENGINE exposes control
2191 commands that can be used to configure what shared-library to load and
2192 to control aspects of the way it is handled. Also, made an update to
2193 the README.ENGINE file that brings its information up-to-date and
2194 provides some information and instructions on the "dynamic" ENGINE
2195 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
2198 *) Make it possible to unload ranges of ERR strings with a new
2199 "ERR_unload_strings" function.
2202 *) Add a copy() function to EVP_MD.
2205 *) Make EVP_MD routines take a context pointer instead of just the
2206 md_data void pointer.
2209 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
2210 that the digest can only process a single chunk of data
2211 (typically because it is provided by a piece of
2212 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
2213 is only going to provide a single chunk of data, and hence the
2214 framework needn't accumulate the data for oneshot drivers.
2217 *) As with "ERR", make it possible to replace the underlying "ex_data"
2218 functions. This change also alters the storage and management of global
2219 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
2220 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
2221 index counters. The API functions that use this state have been changed
2222 to take a "class_index" rather than pointers to the class's local STACK
2223 and counter, and there is now an API function to dynamically create new
2224 classes. This centralisation allows us to (a) plug a lot of the
2225 thread-safety problems that existed, and (b) makes it possible to clean
2226 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
2227 such data would previously have always leaked in application code and
2228 workarounds were in place to make the memory debugging turn a blind eye
2229 to it. Application code that doesn't use this new function will still
2230 leak as before, but their memory debugging output will announce it now
2231 rather than letting it slide.
2233 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
2234 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
2235 has a return value to indicate success or failure.
2238 *) Make it possible to replace the underlying "ERR" functions such that the
2239 global state (2 LHASH tables and 2 locks) is only used by the "default"
2240 implementation. This change also adds two functions to "get" and "set"
2241 the implementation prior to it being automatically set the first time
2242 any other ERR function takes place. Ie. an application can call "get",
2243 pass the return value to a module it has just loaded, and that module
2244 can call its own "set" function using that value. This means the
2245 module's "ERR" operations will use (and modify) the error state in the
2246 application and not in its own statically linked copy of OpenSSL code.
2249 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2250 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
2251 the operation, and provides a more encapsulated way for external code
2252 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
2253 to use these functions rather than manually incrementing the counts.
2255 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2258 *) Add EVP test program.
2261 *) Add symmetric cipher support to ENGINE. Expect the API to change!
2264 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
2265 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
2266 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
2267 These allow a CRL to be built without having to access X509_CRL fields
2268 directly. Modify 'ca' application to use new functions.
2271 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
2272 bug workarounds. Rollback attack detection is a security feature.
2273 The problem will only arise on OpenSSL servers when TLSv1 is not
2274 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
2275 Software authors not wanting to support TLSv1 will have special reasons
2276 for their choice and can explicitly enable this option.
2277 [Bodo Moeller, Lutz Jaenicke]
2279 *) Rationalise EVP so it can be extended: don't include a union of
2280 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
2281 (similar to those existing for EVP_CIPHER_CTX).
2286 EVP_MD_CTX_init(&md); /* new function call */
2287 EVP_DigestInit(&md, EVP_sha1());
2288 EVP_DigestUpdate(&md, in, len);
2289 EVP_DigestFinal(&md, out, NULL);
2290 EVP_MD_CTX_cleanup(&md); /* new function call */
2294 *) Make DES key schedule conform to the usual scheme, as well as
2295 correcting its structure. This means that calls to DES functions
2296 now have to pass a pointer to a des_key_schedule instead of a
2297 plain des_key_schedule (which was actually always a pointer
2300 des_key_schedule ks;
2302 des_set_key_checked(..., &ks);
2303 des_ncbc_encrypt(..., &ks, ...);
2305 (Note that a later change renames 'des_...' into 'DES_...'.)
2308 *) Initial reduction of linker bloat: the use of some functions, such as
2309 PEM causes large amounts of unused functions to be linked in due to
2310 poor organisation. For example pem_all.c contains every PEM function
2311 which has a knock on effect of linking in large amounts of (unused)
2312 ASN1 code. Grouping together similar functions and splitting unrelated
2313 functions prevents this.
2316 *) Cleanup of EVP macros.
2319 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2320 correct _ecb suffix.
2323 *) Add initial OCSP responder support to ocsp application. The
2324 revocation information is handled using the text based index
2325 use by the ca application. The responder can either handle
2326 requests generated internally, supplied in files (for example
2327 via a CGI script) or using an internal minimal server.
2330 *) Add configuration choices to get zlib compression for TLS.
2333 *) Changes to Kerberos SSL for RFC 2712 compliance:
2334 1. Implemented real KerberosWrapper, instead of just using
2335 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2336 2. Implemented optional authenticator field of KerberosWrapper.
2338 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
2339 and authenticator structs; see crypto/krb5/.
2341 Generalized Kerberos calls to support multiple Kerberos libraries.
2342 [Vern Staats <staatsvr@asc.hpc.mil>,
2343 Jeffrey Altman <jaltman@columbia.edu>
2344 via Richard Levitte]
2346 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
2347 already does with RSA. testdsa.h now has 'priv_key/pub_key'
2348 values for each of the key sizes rather than having just
2349 parameters (and 'speed' generating keys each time).
2352 *) Speed up EVP routines.
2355 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
2356 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
2357 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
2358 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
2360 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
2361 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
2362 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
2365 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
2367 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
2370 *) Added the OS2-EMX target.
2371 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
2373 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
2374 to support NCONF routines in extension code. New function CONF_set_nconf()
2375 to allow functions which take an NCONF to also handle the old LHASH
2376 structure: this means that the old CONF compatible routines can be
2377 retained (in particular wrt extensions) without having to duplicate the
2378 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
2381 *) Enhance the general user interface with mechanisms for inner control
2382 and with possibilities to have yes/no kind of prompts.
2385 *) Change all calls to low level digest routines in the library and
2386 applications to use EVP. Add missing calls to HMAC_cleanup() and
2387 don't assume HMAC_CTX can be copied using memcpy().
2388 [Verdon Walker <VWalker@novell.com>, Steve Henson]
2390 *) Add the possibility to control engines through control names but with
2391 arbitrary arguments instead of just a string.
2392 Change the key loaders to take a UI_METHOD instead of a callback
2393 function pointer. NOTE: this breaks binary compatibility with earlier
2394 versions of OpenSSL [engine].
2395 Adapt the nCipher code for these new conditions and add a card insertion
2399 *) Enhance the general user interface with mechanisms to better support
2400 dialog box interfaces, application-defined prompts, the possibility
2401 to use defaults (for example default passwords from somewhere else)
2402 and interrupts/cancellations.
2405 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
2406 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
2409 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2410 tidy up some unnecessarily weird code in 'sk_new()').
2411 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
2413 *) Change the key loading routines for ENGINEs to use the same kind
2414 callback (pem_password_cb) as all other routines that need this
2418 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
2419 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
2420 than this minimum value is recommended.
2423 *) New random seeder for OpenVMS, using the system process statistics
2424 that are easily reachable.
2427 *) Windows apparently can't transparently handle global
2428 variables defined in DLLs. Initialisations such as:
2430 const ASN1_ITEM *it = &ASN1_INTEGER_it;
2432 wont compile. This is used by the any applications that need to
2433 declare their own ASN1 modules. This was fixed by adding the option
2434 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
2435 needed for static libraries under Win32.
2438 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
2439 setting of purpose and trust fields. New X509_STORE trust and
2440 purpose functions and tidy up setting in other SSL functions.
2443 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
2444 structure. These are inherited by X509_STORE_CTX when it is
2445 initialised. This allows various defaults to be set in the
2446 X509_STORE structure (such as flags for CRL checking and custom
2447 purpose or trust settings) for functions which only use X509_STORE_CTX
2448 internally such as S/MIME.
2450 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
2451 trust settings if they are not set in X509_STORE. This allows X509_STORE
2452 purposes and trust (in S/MIME for example) to override any set by default.
2454 Add command line options for CRL checking to smime, s_client and s_server
2458 *) Initial CRL based revocation checking. If the CRL checking flag(s)
2459 are set then the CRL is looked up in the X509_STORE structure and
2460 its validity and signature checked, then if the certificate is found
2461 in the CRL the verify fails with a revoked error.
2463 Various new CRL related callbacks added to X509_STORE_CTX structure.
2465 Command line options added to 'verify' application to support this.
2467 This needs some additional work, such as being able to handle multiple
2468 CRLs with different times, extension based lookup (rather than just
2469 by subject name) and ultimately more complete V2 CRL extension
2473 *) Add a general user interface API (crypto/ui/). This is designed
2474 to replace things like des_read_password and friends (backward
2475 compatibility functions using this new API are provided).
2476 The purpose is to remove prompting functions from the DES code
2477 section as well as provide for prompting through dialog boxes in
2478 a window system and the like.
2481 *) Add "ex_data" support to ENGINE so implementations can add state at a
2482 per-structure level rather than having to store it globally.
2485 *) Make it possible for ENGINE structures to be copied when retrieved by
2486 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
2487 This causes the "original" ENGINE structure to act like a template,
2488 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
2489 operational state can be localised to each ENGINE structure, despite the
2490 fact they all share the same "methods". New ENGINE structures returned in
2491 this case have no functional references and the return value is the single
2492 structural reference. This matches the single structural reference returned
2493 by ENGINE_by_id() normally, when it is incremented on the pre-existing
2497 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
2498 needs to match any other type at all we need to manually clear the
2502 *) Changes to the "openssl engine" utility to include;
2503 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
2504 about an ENGINE's available control commands.
2505 - executing control commands from command line arguments using the
2506 '-pre' and '-post' switches. '-post' is only used if '-t' is
2507 specified and the ENGINE is successfully initialised. The syntax for
2508 the individual commands are colon-separated, for example;
2509 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
2512 *) New dynamic control command support for ENGINEs. ENGINEs can now
2513 declare their own commands (numbers), names (strings), descriptions,
2514 and input types for run-time discovery by calling applications. A
2515 subset of these commands are implicitly classed as "executable"
2516 depending on their input type, and only these can be invoked through
2517 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
2518 can be based on user input, config files, etc). The distinction is
2519 that "executable" commands cannot return anything other than a boolean
2520 result and can only support numeric or string input, whereas some
2521 discoverable commands may only be for direct use through
2522 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
2523 pointers, or other custom uses. The "executable" commands are to
2524 support parameterisations of ENGINE behaviour that can be
2525 unambiguously defined by ENGINEs and used consistently across any
2526 OpenSSL-based application. Commands have been added to all the
2527 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
2528 control over shared-library paths without source code alterations.
2531 *) Changed all ENGINE implementations to dynamically allocate their
2532 ENGINEs rather than declaring them statically. Apart from this being
2533 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
2534 this also allows the implementations to compile without using the
2535 internal engine_int.h header.
2538 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
2539 'const' value. Any code that should be able to modify a RAND_METHOD
2540 should already have non-const pointers to it (ie. they should only
2541 modify their own ones).
2544 *) Made a variety of little tweaks to the ENGINE code.
2545 - "atalla" and "ubsec" string definitions were moved from header files
2546 to C code. "nuron" string definitions were placed in variables
2547 rather than hard-coded - allowing parameterisation of these values
2548 later on via ctrl() commands.
2549 - Removed unused "#if 0"'d code.
2550 - Fixed engine list iteration code so it uses ENGINE_free() to release
2551 structural references.
2552 - Constified the RAND_METHOD element of ENGINE structures.
2553 - Constified various get/set functions as appropriate and added
2554 missing functions (including a catch-all ENGINE_cpy that duplicates
2555 all ENGINE values onto a new ENGINE except reference counts/state).
2556 - Removed NULL parameter checks in get/set functions. Setting a method
2557 or function to NULL is a way of cancelling out a previously set
2558 value. Passing a NULL ENGINE parameter is just plain stupid anyway
2559 and doesn't justify the extra error symbols and code.
2560 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
2561 flags from engine_int.h to engine.h.
2562 - Changed prototypes for ENGINE handler functions (init(), finish(),
2563 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
2566 *) Implement binary inversion algorithm for BN_mod_inverse in addition
2567 to the algorithm using long division. The binary algorithm can be
2568 used only if the modulus is odd. On 32-bit systems, it is faster
2569 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
2570 roughly 5-15% for 256-bit moduli), so we use it only for moduli
2571 up to 450 bits. In 64-bit environments, the binary algorithm
2572 appears to be advantageous for much longer moduli; here we use it
2573 for moduli up to 2048 bits.
2576 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
2577 could not support the combine flag in choice fields.
2580 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
2581 extensions from a certificate request to the certificate.
2584 *) Allow multiple 'certopt' and 'nameopt' options to be separated
2585 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
2586 file: this allows the display of the certificate about to be
2587 signed to be customised, to allow certain fields to be included
2588 or excluded and extension details. The old system didn't display
2589 multicharacter strings properly, omitted fields not in the policy
2590 and couldn't display additional details such as extensions.
2593 *) Function EC_POINTs_mul for multiple scalar multiplication
2594 of an arbitrary number of elliptic curve points
2595 \sum scalars[i]*points[i],
2596 optionally including the generator defined for the EC_GROUP:
2597 scalar*generator + \sum scalars[i]*points[i].
2599 EC_POINT_mul is a simple wrapper function for the typical case
2600 that the point list has just one item (besides the optional
2604 *) First EC_METHODs for curves over GF(p):
2606 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
2607 operations and provides various method functions that can also
2608 operate with faster implementations of modular arithmetic.
2610 EC_GFp_mont_method() reuses most functions that are part of
2611 EC_GFp_simple_method, but uses Montgomery arithmetic.
2613 [Bodo Moeller; point addition and point doubling
2614 implementation directly derived from source code provided by
2615 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
2617 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
2618 crypto/ec/ec_lib.c):
2620 Curves are EC_GROUP objects (with an optional group generator)
2621 based on EC_METHODs that are built into the library.
2623 Points are EC_POINT objects based on EC_GROUP objects.
2625 Most of the framework would be able to handle curves over arbitrary
2626 finite fields, but as there are no obvious types for fields other
2627 than GF(p), some functions are limited to that for now.
2630 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
2631 that the file contains a complete HTTP response.
2634 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
2635 change the def and num file printf format specifier from "%-40sXXX"
2636 to "%-39s XXX". The latter will always guarantee a space after the
2637 field while the former will cause them to run together if the field
2638 is 40 of more characters long.
2641 *) Constify the cipher and digest 'method' functions and structures
2642 and modify related functions to take constant EVP_MD and EVP_CIPHER
2646 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
2647 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
2650 *) Modify EVP_Digest*() routines so they now return values. Although the
2651 internal software routines can never fail additional hardware versions
2655 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2657 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
2658 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
2661 ERR_R_NESTED_ASN1_ERROR
2663 ERR_R_MISSING_ASN1_EOS
2664 were 4 .. 9, conflicting with
2665 ERR_LIB_RSA (= ERR_R_RSA_LIB)
2667 ERR_LIB_PEM (= ERR_R_PEM_LIB).
2668 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
2670 Add new error code 'ERR_R_INTERNAL_ERROR'.
2673 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2677 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
2678 sets the subject name for a new request or supersedes the
2679 subject name in a given request. Formats that can be parsed are
2680 'CN=Some Name, OU=myOU, C=IT'
2682 'CN=Some Name/OU=myOU/C=IT'.
2684 Add options '-batch' and '-verbose' to 'openssl req'.
2685 [Massimiliano Pala <madwolf@hackmasters.net>]
2687 *) Introduce the possibility to access global variables through
2688 functions on platform were that's the best way to handle exporting
2689 global variables in shared libraries. To enable this functionality,
2690 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
2691 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
2692 is normally done by Configure or something similar).
2694 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
2695 in the source file (foo.c) like this:
2697 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
2698 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
2700 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
2701 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
2703 OPENSSL_DECLARE_GLOBAL(int,foo);
2704 #define foo OPENSSL_GLOBAL_REF(foo)
2705 OPENSSL_DECLARE_GLOBAL(double,bar);
2706 #define bar OPENSSL_GLOBAL_REF(bar)
2708 The #defines are very important, and therefore so is including the
2709 header file everywhere where the defined globals are used.
2711 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2712 of ASN.1 items, but that structure is a bit different.
2714 The largest change is in util/mkdef.pl which has been enhanced with
2715 better and easier to understand logic to choose which symbols should
2716 go into the Windows .def files as well as a number of fixes and code
2717 cleanup (among others, algorithm keywords are now sorted
2718 lexicographically to avoid constant rewrites).
2721 *) In BN_div() keep a copy of the sign of 'num' before writing the
2722 result to 'rm' because if rm==num the value will be overwritten
2723 and produce the wrong result if 'num' is negative: this caused
2724 problems with BN_mod() and BN_nnmod().
2727 *) Function OCSP_request_verify(). This checks the signature on an
2728 OCSP request and verifies the signer certificate. The signer
2729 certificate is just checked for a generic purpose and OCSP request
2733 *) Add OCSP_check_validity() function to check the validity of OCSP
2734 responses. OCSP responses are prepared in real time and may only
2735 be a few seconds old. Simply checking that the current time lies
2736 between thisUpdate and nextUpdate max reject otherwise valid responses
2737 caused by either OCSP responder or client clock inaccuracy. Instead
2738 we allow thisUpdate and nextUpdate to fall within a certain period of
2739 the current time. The age of the response can also optionally be
2740 checked. Two new options -validity_period and -status_age added to
2744 *) If signature or public key algorithm is unrecognized print out its
2745 OID rather that just UNKNOWN.
2748 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
2749 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
2750 ID to be generated from the issuer certificate alone which can then be
2751 passed to OCSP_id_issuer_cmp().
2754 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
2755 ASN1 modules to export functions returning ASN1_ITEM pointers
2756 instead of the ASN1_ITEM structures themselves. This adds several
2757 new macros which allow the underlying ASN1 function/structure to
2758 be accessed transparently. As a result code should not use ASN1_ITEM
2759 references directly (such as &X509_it) but instead use the relevant
2760 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
2761 use of the new ASN1 code on platforms where exporting structures
2762 is problematical (for example in shared libraries) but exporting
2763 functions returning pointers to structures is not.
2766 *) Add support for overriding the generation of SSL/TLS session IDs.
2767 These callbacks can be registered either in an SSL_CTX or per SSL.
2768 The purpose of this is to allow applications to control, if they wish,
2769 the arbitrary values chosen for use as session IDs, particularly as it
2770 can be useful for session caching in multiple-server environments. A
2771 command-line switch for testing this (and any client code that wishes
2772 to use such a feature) has been added to "s_server".
2773 [Geoff Thorpe, Lutz Jaenicke]
2775 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2776 of the form '#if defined(...) || defined(...) || ...' and
2777 '#if !defined(...) && !defined(...) && ...'. This also avoids
2778 the growing number of special cases it was previously handling.
2781 *) Make all configuration macros available for application by making
2782 sure they are available in opensslconf.h, by giving them names starting
2783 with "OPENSSL_" to avoid conflicts with other packages and by making
2784 sure e_os2.h will cover all platform-specific cases together with
2786 Additionally, it is now possible to define configuration/platform-
2787 specific names (called "system identities"). In the C code, these
2788 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2789 macro with the name beginning with "OPENSSL_SYS_", which is determined
2790 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2794 *) New option -set_serial to 'req' and 'x509' this allows the serial
2795 number to use to be specified on the command line. Previously self
2796 signed certificates were hard coded with serial number 0 and the
2797 CA options of 'x509' had to use a serial number in a file which was
2801 *) New options to 'ca' utility to support V2 CRL entry extensions.
2802 Currently CRL reason, invalidity date and hold instruction are
2803 supported. Add new CRL extensions to V3 code and some new objects.
2806 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2807 disable standard block padding (aka PKCS#5 padding) in the EVP
2808 API, which was previously mandatory. This means that the data is
2809 not padded in any way and so the total length much be a multiple
2810 of the block size, otherwise an error occurs.
2813 *) Initial (incomplete) OCSP SSL support.
2816 *) New function OCSP_parse_url(). This splits up a URL into its host,
2817 port and path components: primarily to parse OCSP URLs. New -url
2818 option to ocsp utility.
2821 *) New nonce behavior. The return value of OCSP_check_nonce() now
2822 reflects the various checks performed. Applications can decide
2823 whether to tolerate certain situations such as an absent nonce
2824 in a response when one was present in a request: the ocsp application
2825 just prints out a warning. New function OCSP_add1_basic_nonce()
2826 this is to allow responders to include a nonce in a response even if
2827 the request is nonce-less.
2830 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2831 skipped when using openssl x509 multiple times on a single input file,
2832 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2835 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2836 set string type: to handle setting ASN1_TIME structures. Fix ca
2837 utility to correctly initialize revocation date of CRLs.
2840 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2841 the clients preferred ciphersuites and rather use its own preferences.
2842 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2843 Internet Explorer by ensuring unchanged hash method during stepup.
2844 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2847 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2848 to aes and add a new 'exist' option to print out symbols that don't
2852 *) Additional options to ocsp utility to allow flags to be set and
2853 additional certificates supplied.
2856 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2857 OCSP client a number of certificate to only verify the response
2861 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2862 handle the new API. Currently only ECB, CBC modes supported. Add new
2865 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2866 Encryption Standard (AES) Ciphersuites for Transport Layer
2867 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2868 not enabled by default and were not part of the "ALL" ciphersuite
2869 alias because they were not yet official; they could be
2870 explicitly requested by specifying the "AESdraft" ciphersuite
2871 group alias. In the final release of OpenSSL 0.9.7, the group
2872 alias is called "AES" and is part of "ALL".)
2873 [Ben Laurie, Steve Henson, Bodo Moeller]
2875 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2876 request to response.
2879 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2880 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2881 extract information from a certificate request. OCSP_response_create()
2882 creates a response and optionally adds a basic response structure.
2883 OCSP_basic_add1_status() adds a complete single response to a basic
2884 response and returns the OCSP_SINGLERESP structure just added (to allow
2885 extensions to be included for example). OCSP_basic_add1_cert() adds a
2886 certificate to a basic response and OCSP_basic_sign() signs a basic
2887 response with various flags. New helper functions ASN1_TIME_check()
2888 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2889 (converts ASN1_TIME to GeneralizedTime).
2892 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2893 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2894 structure from a certificate. X509_pubkey_digest() digests the public_key
2895 contents: this is used in various key identifiers.
2898 *) Make sk_sort() tolerate a NULL argument.
2899 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2901 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2902 passed by the function are trusted implicitly. If any of them signed the
2903 response then it is assumed to be valid and is not verified.
2906 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2907 to data. This was previously part of the PKCS7 ASN1 code. This
2908 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2909 [Steve Henson, reported by Kenneth R. Robinette
2910 <support@securenetterm.com>]
2912 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2913 routines: without these tracing memory leaks is very painful.
2914 Fix leaks in PKCS12 and PKCS7 routines.
2917 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2918 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2919 effectively meant GeneralizedTime would never be used. Now it
2920 is initialised to -1 but X509_time_adj() now has to check the value
2921 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2922 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2923 [Steve Henson, reported by Kenneth R. Robinette
2924 <support@securenetterm.com>]
2926 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2927 result in a zero length in the ASN1_INTEGER structure which was
2928 not consistent with the structure when d2i_ASN1_INTEGER() was used
2929 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2930 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2931 where it did not print out a minus for negative ASN1_INTEGER.
2934 *) Add summary printout to ocsp utility. The various functions which
2935 convert status values to strings have been renamed to:
2936 OCSP_response_status_str(), OCSP_cert_status_str() and
2937 OCSP_crl_reason_str() and are no longer static. New options
2938 to verify nonce values and to disable verification. OCSP response
2939 printout format cleaned up.
2942 *) Add additional OCSP certificate checks. These are those specified
2943 in RFC2560. This consists of two separate checks: the CA of the
2944 certificate being checked must either be the OCSP signer certificate
2945 or the issuer of the OCSP signer certificate. In the latter case the
2946 OCSP signer certificate must contain the OCSP signing extended key
2947 usage. This check is performed by attempting to match the OCSP
2948 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2949 in the OCSP_CERTID structures of the response.
2952 *) Initial OCSP certificate verification added to OCSP_basic_verify()
2953 and related routines. This uses the standard OpenSSL certificate
2954 verify routines to perform initial checks (just CA validity) and
2955 to obtain the certificate chain. Then additional checks will be
2956 performed on the chain. Currently the root CA is checked to see
2957 if it is explicitly trusted for OCSP signing. This is used to set
2958 a root CA as a global signing root: that is any certificate that
2959 chains to that CA is an acceptable OCSP signing certificate.
2962 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
2963 extensions from a separate configuration file.
2964 As when reading extensions from the main configuration file,
2965 the '-extensions ...' option may be used for specifying the
2967 [Massimiliano Pala <madwolf@comune.modena.it>]
2969 *) New OCSP utility. Allows OCSP requests to be generated or
2970 read. The request can be sent to a responder and the output
2971 parsed, outputed or printed in text form. Not complete yet:
2972 still needs to check the OCSP response validity.
2975 *) New subcommands for 'openssl ca':
2976 'openssl ca -status <serial>' prints the status of the cert with
2977 the given serial number (according to the index file).
2978 'openssl ca -updatedb' updates the expiry status of certificates
2980 [Massimiliano Pala <madwolf@comune.modena.it>]
2982 *) New '-newreq-nodes' command option to CA.pl. This is like
2983 '-newreq', but calls 'openssl req' with the '-nodes' option
2984 so that the resulting key is not encrypted.
2985 [Damien Miller <djm@mindrot.org>]
2987 *) New configuration for the GNU Hurd.
2988 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
2990 *) Initial code to implement OCSP basic response verify. This
2991 is currently incomplete. Currently just finds the signer's
2992 certificate and verifies the signature on the response.
2995 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
2996 value of OPENSSLDIR. This is available via the new '-d' option
2997 to 'openssl version', and is also included in 'openssl version -a'.
3000 *) Allowing defining memory allocation callbacks that will be given
3001 file name and line number information in additional arguments
3002 (a const char* and an int). The basic functionality remains, as
3003 well as the original possibility to just replace malloc(),
3004 realloc() and free() by functions that do not know about these
3005 additional arguments. To register and find out the current
3006 settings for extended allocation functions, the following
3007 functions are provided:
3009 CRYPTO_set_mem_ex_functions
3010 CRYPTO_set_locked_mem_ex_functions
3011 CRYPTO_get_mem_ex_functions
3012 CRYPTO_get_locked_mem_ex_functions
3014 These work the same way as CRYPTO_set_mem_functions and friends.
3015 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
3016 extended allocation function is enabled.
3017 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
3018 a conventional allocation function is enabled.
3019 [Richard Levitte, Bodo Moeller]
3021 *) Finish off removing the remaining LHASH function pointer casts.
3022 There should no longer be any prototype-casting required when using
3023 the LHASH abstraction, and any casts that remain are "bugs". See
3024 the callback types and macros at the head of lhash.h for details
3025 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
3028 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
3029 If /dev/[u]random devices are not available or do not return enough
3030 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
3032 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
3033 /etc/entropy will be queried once each in this sequence, quering stops
3034 when enough entropy was collected without querying more sockets.
3037 *) Change the Unix RAND_poll() variant to be able to poll several
3038 random devices, as specified by DEVRANDOM, until a sufficient amount
3039 of data has been collected. We spend at most 10 ms on each file
3040 (select timeout) and read in non-blocking mode. DEVRANDOM now
3041 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
3042 (previously it was just the string "/dev/urandom"), so on typical
3043 platforms the 10 ms delay will never occur.
3044 Also separate out the Unix variant to its own file, rand_unix.c.
3045 For VMS, there's a currently-empty rand_vms.c.
3048 *) Move OCSP client related routines to ocsp_cl.c. These
3049 provide utility functions which an application needing
3050 to issue a request to an OCSP responder and analyse the
3051 response will typically need: as opposed to those which an
3052 OCSP responder itself would need which will be added later.
3054 OCSP_request_sign() signs an OCSP request with an API similar
3055 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
3056 response. OCSP_response_get1_basic() extracts basic response
3057 from response. OCSP_resp_find_status(): finds and extracts status
3058 information from an OCSP_CERTID structure (which will be created
3059 when the request structure is built). These are built from lower
3060 level functions which work on OCSP_SINGLERESP structures but
3061 wont normally be used unless the application wishes to examine
3062 extensions in the OCSP response for example.
3064 Replace nonce routines with a pair of functions.
3065 OCSP_request_add1_nonce() adds a nonce value and optionally
3066 generates a random value. OCSP_check_nonce() checks the
3067 validity of the nonce in an OCSP response.
3070 *) Change function OCSP_request_add() to OCSP_request_add0_id().
3071 This doesn't copy the supplied OCSP_CERTID and avoids the
3072 need to free up the newly created id. Change return type
3073 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
3074 This can then be used to add extensions to the request.
3075 Deleted OCSP_request_new(), since most of its functionality
3076 is now in OCSP_REQUEST_new() (and the case insensitive name
3077 clash) apart from the ability to set the request name which
3078 will be added elsewhere.
3081 *) Update OCSP API. Remove obsolete extensions argument from
3082 various functions. Extensions are now handled using the new
3083 OCSP extension code. New simple OCSP HTTP function which
3084 can be used to send requests and parse the response.
3087 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
3088 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
3089 uses the special reorder version of SET OF to sort the attributes
3090 and reorder them to match the encoded order. This resolves a long
3091 standing problem: a verify on a PKCS7 structure just after signing
3092 it used to fail because the attribute order did not match the
3093 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
3094 it uses the received order. This is necessary to tolerate some broken
3095 software that does not order SET OF. This is handled by encoding
3096 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
3097 to produce the required SET OF.
3100 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
3101 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
3102 files to get correct declarations of the ASN.1 item variables.
3105 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
3106 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
3107 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
3108 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
3109 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
3110 ASN1_ITEM and no wrapper functions.
3113 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
3114 replace the old function pointer based I/O routines. Change most of
3115 the *_d2i_bio() and *_d2i_fp() functions to use these.
3118 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
3119 lines, recognice more "algorithms" that can be deselected, and make
3120 it complain about algorithm deselection that isn't recognised.
3123 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
3124 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
3125 to use new functions. Add NO_ASN1_OLD which can be set to remove
3126 some old style ASN1 functions: this can be used to determine if old
3127 code will still work when these eventually go away.
3130 *) New extension functions for OCSP structures, these follow the
3131 same conventions as certificates and CRLs.
3134 *) New function X509V3_add1_i2d(). This automatically encodes and
3135 adds an extension. Its behaviour can be customised with various
3136 flags to append, replace or delete. Various wrappers added for
3137 certifcates and CRLs.
3140 *) Fix to avoid calling the underlying ASN1 print routine when
3141 an extension cannot be parsed. Correct a typo in the
3142 OCSP_SERVICELOC extension. Tidy up print OCSP format.
3145 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
3146 entries for variables.
3149 *) Add functionality to apps/openssl.c for detecting locking
3150 problems: As the program is single-threaded, all we have
3151 to do is register a locking callback using an array for
3152 storing which locks are currently held by the program.
3155 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
3156 SSL_get_ex_data_X509_STORE_idx(), which is used in
3157 ssl_verify_cert_chain() and thus can be called at any time
3158 during TLS/SSL handshakes so that thread-safety is essential.
3159 Unfortunately, the ex_data design is not at all suited
3160 for multi-threaded use, so it probably should be abolished.
3163 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
3164 [Broadcom, tweaked and integrated by Geoff Thorpe]
3166 *) Move common extension printing code to new function
3167 X509V3_print_extensions(). Reorganise OCSP print routines and
3168 implement some needed OCSP ASN1 functions. Add OCSP extensions.
3171 *) New function X509_signature_print() to remove duplication in some
3175 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
3176 set (this was treated exactly the same as SET OF previously). This
3177 is used to reorder the STACK representing the structure to match the
3178 encoding. This will be used to get round a problem where a PKCS7
3179 structure which was signed could not be verified because the STACK
3180 order did not reflect the encoded order.
3183 *) Reimplement the OCSP ASN1 module using the new code.
3186 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
3187 for its ASN1 operations. The old style function pointers still exist
3188 for now but they will eventually go away.
3191 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
3192 completely replaces the old ASN1 functionality with a table driven
3193 encoder and decoder which interprets an ASN1_ITEM structure describing
3194 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
3195 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
3196 has also been converted to the new form.
3199 *) Change BN_mod_exp_recp so that negative moduli are tolerated
3200 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
3201 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
3202 for negative moduli.
3205 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
3206 of not touching the result's sign bit.
3209 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
3213 *) Changed the LHASH code to use prototypes for callbacks, and created
3214 macros to declare and implement thin (optionally static) functions
3215 that provide type-safety and avoid function pointer casting for the
3216 type-specific callbacks.
3219 *) Added Kerberos Cipher Suites to be used with TLS, as written in
3221 [Veers Staats <staatsvr@asc.hpc.mil>,
3222 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
3224 *) Reformat the FAQ so the different questions and answers can be divided
3225 in sections depending on the subject.
3228 *) Have the zlib compression code load ZLIB.DLL dynamically under
3232 *) New function BN_mod_sqrt for computing square roots modulo a prime
3233 (using the probabilistic Tonelli-Shanks algorithm unless
3234 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
3235 be handled deterministically).
3236 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3238 *) Make BN_mod_inverse faster by explicitly handling small quotients
3239 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
3240 512 bits], about 30% for larger ones [1024 or 2048 bits].)
3243 *) New function BN_kronecker.
3246 *) Fix BN_gcd so that it works on negative inputs; the result is
3247 positive unless both parameters are zero.
3248 Previously something reasonably close to an infinite loop was
3249 possible because numbers could be growing instead of shrinking
3250 in the implementation of Euclid's algorithm.
3253 *) Fix BN_is_word() and BN_is_one() macros to take into account the
3254 sign of the number in question.
3256 Fix BN_is_word(a,w) to work correctly for w == 0.
3258 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
3259 because its test if the absolute value of 'a' equals 'w'.
3260 Note that BN_abs_is_word does *not* handle w == 0 reliably;
3261 it exists mostly for use in the implementations of BN_is_zero(),
3262 BN_is_one(), and BN_is_word().
3265 *) New function BN_swap.
3268 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
3269 the exponentiation functions are more likely to produce reasonable
3270 results on negative inputs.
3273 *) Change BN_mod_mul so that the result is always non-negative.
3274 Previously, it could be negative if one of the factors was negative;
3275 I don't think anyone really wanted that behaviour.
3278 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
3279 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
3280 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
3281 and add new functions:
3290 BN_mod_lshift1_quick
3294 These functions always generate non-negative results.
3296 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
3297 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
3299 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
3300 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
3301 be reduced modulo m.
3302 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3305 The following entry accidentily appeared in the CHANGES file
3306 distributed with OpenSSL 0.9.7. The modifications described in
3307 it do *not* apply to OpenSSL 0.9.7.
3309 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3310 was actually never needed) and in BN_mul(). The removal in BN_mul()
3311 required a small change in bn_mul_part_recursive() and the addition
3312 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3313 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3314 bn_sub_words() and bn_add_words() except they take arrays with
3319 *) In 'openssl passwd', verify passwords read from the terminal
3320 unless the '-salt' option is used (which usually means that
3321 verification would just waste user's time since the resulting
3322 hash is going to be compared with some given password hash)
3323 or the new '-noverify' option is used.
3325 This is an incompatible change, but it does not affect
3326 non-interactive use of 'openssl passwd' (passwords on the command
3327 line, '-stdin' option, '-in ...' option) and thus should not
3331 *) Remove all references to RSAref, since there's no more need for it.
3334 *) Make DSO load along a path given through an environment variable
3335 (SHLIB_PATH) with shl_load().
3338 *) Constify the ENGINE code as a result of BIGNUM constification.
3339 Also constify the RSA code and most things related to it. In a
3340 few places, most notable in the depth of the ASN.1 code, ugly
3341 casts back to non-const were required (to be solved at a later
3345 *) Make it so the openssl application has all engines loaded by default.
3348 *) Constify the BIGNUM routines a little more.
3351 *) Add the following functions:
3353 ENGINE_load_cswift()
3355 ENGINE_load_atalla()
3357 ENGINE_load_builtin_engines()
3359 That way, an application can itself choose if external engines that
3360 are built-in in OpenSSL shall ever be used or not. The benefit is
3361 that applications won't have to be linked with libdl or other dso
3362 libraries unless it's really needed.
3364 Changed 'openssl engine' to load all engines on demand.
3365 Changed the engine header files to avoid the duplication of some
3366 declarations (they differed!).
3369 *) 'openssl engine' can now list capabilities.
3372 *) Better error reporting in 'openssl engine'.
3375 *) Never call load_dh_param(NULL) in s_server.
3378 *) Add engine application. It can currently list engines by name and
3379 identity, and test if they are actually available.
3382 *) Improve RPM specification file by forcing symbolic linking and making
3383 sure the installed documentation is also owned by root.root.
3384 [Damien Miller <djm@mindrot.org>]
3386 *) Give the OpenSSL applications more possibilities to make use of
3387 keys (public as well as private) handled by engines.
3390 *) Add OCSP code that comes from CertCo.
3393 *) Add VMS support for the Rijndael code.
3396 *) Added untested support for Nuron crypto accelerator.
3399 *) Add support for external cryptographic devices. This code was
3400 previously distributed separately as the "engine" branch.
3401 [Geoff Thorpe, Richard Levitte]
3403 *) Rework the filename-translation in the DSO code. It is now possible to
3404 have far greater control over how a "name" is turned into a filename
3405 depending on the operating environment and any oddities about the
3406 different shared library filenames on each system.
3409 *) Support threads on FreeBSD-elf in Configure.
3412 *) Fix for SHA1 assembly problem with MASM: it produces
3413 warnings about corrupt line number information when assembling
3414 with debugging information. This is caused by the overlapping
3416 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
3419 NCONF_get_number() has no error checking at all. As a replacement,
3420 NCONF_get_number_e() is defined (_e for "error checking") and is
3421 promoted strongly. The old NCONF_get_number is kept around for
3422 binary backward compatibility.
3423 Make it possible for methods to load from something other than a BIO,
3424 by providing a function pointer that is given a name instead of a BIO.
3425 For example, this could be used to load configuration data from an
3429 *) Fix for non blocking accept BIOs. Added new I/O special reason
3430 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
3431 with non blocking I/O was not possible because no retry code was
3432 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
3436 *) Added the beginnings of Rijndael support.
3439 *) Fix for bug in DirectoryString mask setting. Add support for
3440 X509_NAME_print_ex() in 'req' and X509_print_ex() function
3441 to allow certificate printing to more controllable, additional
3442 'certopt' option to 'x509' to allow new printing options to be
3446 *) Clean old EAY MD5 hack from e_os.h.
3449 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
3451 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3452 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3453 [Joe Orton, Steve Henson]
3455 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
3457 *) Fix additional bug revealed by the NISCC test suite:
3459 Stop bug triggering large recursion when presented with
3460 certain ASN.1 tags (CVE-2003-0851)
3463 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
3465 *) Fix various bugs revealed by running the NISCC test suite:
3467 Stop out of bounds reads in the ASN1 code when presented with
3468 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3470 If verify callback ignores invalid public key errors don't try to check
3471 certificate signature with the NULL public key.
3475 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3476 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3480 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3481 extra data after the compression methods not only for TLS 1.0
3482 but also for SSL 3.0 (as required by the specification).
3483 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3485 *) Change X509_certificate_type() to mark the key as exported/exportable
3486 when it's 512 *bits* long, not 512 bytes.
3489 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
3491 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3492 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3493 a protocol version number mismatch like a decryption error
3494 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3497 *) Turn on RSA blinding by default in the default implementation
3498 to avoid a timing attack. Applications that don't want it can call
3499 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3500 They would be ill-advised to do so in most cases.
3501 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3503 *) Change RSA blinding code so that it works when the PRNG is not
3504 seeded (in this case, the secret RSA exponent is abused as
3505 an unpredictable seed -- if it is not unpredictable, there
3506 is no point in blinding anyway). Make RSA blinding thread-safe
3507 by remembering the creator's thread ID in rsa->blinding and
3508 having all other threads use local one-time blinding factors
3509 (this requires more computation than sharing rsa->blinding, but
3510 avoids excessive locking; and if an RSA object is not shared
3511 between threads, blinding will still be very fast).
3514 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
3516 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3517 via timing by performing a MAC computation even if incorrrect
3518 block cipher padding has been found. This is a countermeasure
3519 against active attacks where the attacker has to distinguish
3520 between bad padding and a MAC verification error. (CVE-2003-0078)
3522 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3523 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3524 Martin Vuagnoux (EPFL, Ilion)]
3526 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
3528 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
3529 memory from it's contents. This is done with a counter that will
3530 place alternating values in each byte. This can be used to solve
3531 two issues: 1) the removal of calls to memset() by highly optimizing
3532 compilers, and 2) cleansing with other values than 0, since those can
3533 be read through on certain media, for example a swap space on disk.
3536 *) Bugfix: client side session caching did not work with external caching,
3537 because the session->cipher setting was not restored when reloading
3538 from the external cache. This problem was masked, when
3539 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
3540 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
3543 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
3544 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
3545 [Zeev Lieber <zeev-l@yahoo.com>]
3547 *) Undo an undocumented change introduced in 0.9.6e which caused
3548 repeated calls to OpenSSL_add_all_ciphers() and
3549 OpenSSL_add_all_digests() to be ignored, even after calling
3553 *) Change the default configuration reader to deal with last line not
3554 being properly terminated.
3557 *) Change X509_NAME_cmp() so it applies the special rules on handling
3558 DN values that are of type PrintableString, as well as RDNs of type
3559 emailAddress where the value has the type ia5String.
3560 [stefank@valicert.com via Richard Levitte]
3562 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
3563 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
3564 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
3565 the bitwise-OR of the two for use by the majority of applications
3566 wanting this behaviour, and update the docs. The documented
3567 behaviour and actual behaviour were inconsistent and had been
3568 changing anyway, so this is more a bug-fix than a behavioural
3570 [Geoff Thorpe, diagnosed by Nadav Har'El]
3572 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
3573 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
3576 *) Fix initialization code race conditions in
3577 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
3578 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
3579 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
3580 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
3581 ssl2_get_cipher_by_char(),
3582 ssl3_get_cipher_by_char().
3583 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
3585 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
3586 the cached sessions are flushed, as the remove_cb() might use ex_data
3587 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
3588 (see [openssl.org #212]).
3589 [Geoff Thorpe, Lutz Jaenicke]
3591 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
3592 length, instead of the encoding length to d2i_ASN1_OBJECT.
projects / openssl.git / blob