Client TLS state machine rewrite cleanup
authorMatt Caswell <matt@openssl.org>
Thu, 30 Jul 2015 12:45:50 +0000 (13:45 +0100)
committerMatt Caswell <matt@openssl.org>
Fri, 30 Oct 2015 08:32:44 +0000 (08:32 +0000)
Remove redundant code following moving client side TLS handling to the new
state machine implementation.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl/s3_clnt.c

index 5cf47d21ff7c59662144c30f8fcbb2e2e484f19b..9a7382525b364e73a16c30a165d916c4463671d3 100644 (file)
 
 static int ssl_set_version(SSL *s);
 static int ca_dn_cmp(const X509_NAME *const *a, const X509_NAME *const *b);
-#if 0
-/*
- * Temporarily disabled during development of new state machine code.
- * TODO: Clean me up
- */
-static int ssl3_check_change(SSL *s);
-#endif
 static int ssl_cipher_list_to_bytes(SSL *s, STACK_OF(SSL_CIPHER) *sk,
                                     unsigned char *p);
 
-
-#if 0
-/*
- * Temporarily disabled during development of new state machine code.
- * TODO: Clean me up
- */
-int ssl3_connect(SSL *s)
-{
-    BUF_MEM *buf = NULL;
-    unsigned long Time = (unsigned long)time(NULL);
-    void (*cb) (const SSL *ssl, int type, int val) = NULL;
-    int ret = -1;
-    int new_state, state, skip = 0;
-
-    RAND_add(&Time, sizeof(Time), 0);
-    ERR_clear_error();
-    clear_sys_error();
-
-    if (s->info_callback != NULL)
-        cb = s->info_callback;
-    else if (s->ctx->info_callback != NULL)
-        cb = s->ctx->info_callback;
-
-    s->in_handshake++;
-    if (!SSL_in_init(s) || SSL_in_before(s)) {
-        if (!SSL_clear(s))
-            return -1;
-    }
-
-#ifndef OPENSSL_NO_HEARTBEATS
-    /*
-     * If we're awaiting a HeartbeatResponse, pretend we already got and
-     * don't await it anymore, because Heartbeats don't make sense during
-     * handshakes anyway.
-     */
-    if (s->tlsext_hb_pending) {
-        s->tlsext_hb_pending = 0;
-        s->tlsext_hb_seq++;
-    }
-#endif
-
-    for (;;) {
-        state = s->state;
-
-        switch (s->state) {
-        case SSL_ST_RENEGOTIATE:
-            s->renegotiate = 1;
-            s->state = SSL_ST_CONNECT;
-            s->ctx->stats.sess_connect_renegotiate++;
-            /* break */
-        case SSL_ST_BEFORE:
-        case SSL_ST_CONNECT:
-        case SSL_ST_BEFORE | SSL_ST_CONNECT:
-        case SSL_ST_OK | SSL_ST_CONNECT:
-
-            s->server = 0;
-            if (cb != NULL)
-                cb(s, SSL_CB_HANDSHAKE_START, 1);
-
-            if ((s->version >> 8) != SSL3_VERSION_MAJOR
-                    && s->version != TLS_ANY_VERSION) {
-                SSLerr(SSL_F_SSL3_CONNECT, ERR_R_INTERNAL_ERROR);
-                s->state = SSL_ST_ERR;
-                ret = -1;
-                goto end;
-            }
-
-            if (s->version != TLS_ANY_VERSION &&
-                    !ssl_security(s, SSL_SECOP_VERSION, 0, s->version, NULL)) {
-                SSLerr(SSL_F_SSL3_CONNECT, SSL_R_VERSION_TOO_LOW);
-                return -1;
-            }
-
-            /* s->version=SSL3_VERSION; */
-            s->type = SSL_ST_CONNECT;
-
-            if (s->init_buf == NULL) {
-                if ((buf = BUF_MEM_new()) == NULL) {
-                    ret = -1;
-                    s->state = SSL_ST_ERR;
-                    goto end;
-                }
-                if (!BUF_MEM_grow(buf, SSL3_RT_MAX_PLAIN_LENGTH)) {
-                    ret = -1;
-                    s->state = SSL_ST_ERR;
-                    goto end;
-                }
-                s->init_buf = buf;
-                buf = NULL;
-            }
-
-            if (!ssl3_setup_buffers(s)) {
-                ret = -1;
-                goto end;
-            }
-
-            /* setup buffing BIO */
-            if (!ssl_init_wbio_buffer(s, 0)) {
-                ret = -1;
-                s->state = SSL_ST_ERR;
-                goto end;
-            }
-
-            /* don't push the buffering BIO quite yet */
-
-            ssl3_init_finished_mac(s);
-
-            s->state = SSL3_ST_CW_CLNT_HELLO_A;
-            s->ctx->stats.sess_connect++;
-            s->init_num = 0;
-            /*
-             * Should have been reset by ssl3_get_finished, too.
-             */
-            s->s3->change_cipher_spec = 0;
-            break;
-
-        case SSL3_ST_CW_CLNT_HELLO_A:
-        case SSL3_ST_CW_CLNT_HELLO_B:
-
-            s->shutdown = 0;
-            ret = ssl3_client_hello(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CR_SRVR_HELLO_A;
-            s->init_num = 0;
-
-            /* turn on buffering for the next lot of output */
-            if (s->bbio != s->wbio)
-                s->wbio = BIO_push(s->bbio, s->wbio);
-
-            break;
-
-        case SSL3_ST_CR_SRVR_HELLO_A:
-        case SSL3_ST_CR_SRVR_HELLO_B:
-            ret = ssl3_get_server_hello(s);
-            if (ret <= 0)
-                goto end;
-
-            if (s->hit) {
-                s->state = SSL3_ST_CR_CHANGE_A;
-                if (s->tlsext_ticket_expected) {
-                    /* receive renewed session ticket */
-                    s->state = SSL3_ST_CR_SESSION_TICKET_A;
-                }
-            } else {
-                s->state = SSL3_ST_CR_CERT_A;
-            }
-            s->init_num = 0;
-            break;
-        case SSL3_ST_CR_CERT_A:
-        case SSL3_ST_CR_CERT_B:
-            /* Noop (ret = 0) for everything but EAP-FAST. */
-            ret = ssl3_check_change(s);
-            if (ret < 0)
-                goto end;
-            if (ret == 1) {
-                s->hit = 1;
-                s->state = SSL3_ST_CR_CHANGE_A;
-                s->init_num = 0;
-                break;
-            }
-
-            /* Check if it is anon DH/ECDH, SRP auth */
-            /* or PSK */
-            if (!(s->s3->tmp.new_cipher->algorithm_auth &
-                    (SSL_aNULL | SSL_aSRP | SSL_aPSK))) {
-                ret = ssl3_get_server_certificate(s);
-                if (ret <= 0)
-                    goto end;
-
-                if (s->tlsext_status_expected)
-                    s->state = SSL3_ST_CR_CERT_STATUS_A;
-                else
-                    s->state = SSL3_ST_CR_KEY_EXCH_A;
-            } else {
-                skip = 1;
-                s->state = SSL3_ST_CR_KEY_EXCH_A;
-            }
-
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CR_KEY_EXCH_A:
-        case SSL3_ST_CR_KEY_EXCH_B:
-            ret = ssl3_get_key_exchange(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CR_CERT_REQ_A;
-            s->init_num = 0;
-
-            /*
-             * at this point we check that we have the required stuff from
-             * the server
-             */
-            if (!ssl3_check_cert_and_algorithm(s)) {
-                ret = -1;
-                s->state = SSL_ST_ERR;
-                goto end;
-            }
-            break;
-
-        case SSL3_ST_CR_CERT_REQ_A:
-        case SSL3_ST_CR_CERT_REQ_B:
-            ret = ssl3_get_certificate_request(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CR_SRVR_DONE_A;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CR_SRVR_DONE_A:
-        case SSL3_ST_CR_SRVR_DONE_B:
-            ret = ssl3_get_server_done(s);
-            if (ret <= 0)
-                goto end;
-
-            if (s->s3->tmp.cert_req)
-                s->state = SSL3_ST_CW_CERT_A;
-            else
-                s->state = SSL3_ST_CW_KEY_EXCH_A;
-            s->init_num = 0;
-
-            break;
-
-        case SSL3_ST_CW_CERT_A:
-        case SSL3_ST_CW_CERT_B:
-        case SSL3_ST_CW_CERT_C:
-        case SSL3_ST_CW_CERT_D:
-            ret = ssl3_send_client_certificate(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CW_KEY_EXCH_A;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CW_KEY_EXCH_A:
-        case SSL3_ST_CW_KEY_EXCH_B:
-            ret = ssl3_send_client_key_exchange(s);
-            if (ret <= 0)
-                goto end;
-            /*
-             * EAY EAY EAY need to check for DH fix cert sent back
-             */
-            /*
-             * For TLS, cert_req is set to 2, so a cert chain of nothing is
-             * sent, but no verify packet is sent
-             */
-            /*
-             * XXX: For now, we do not support client authentication in ECDH
-             * cipher suites with ECDH (rather than ECDSA) certificates. We
-             * need to skip the certificate verify message when client's
-             * ECDH public key is sent inside the client certificate.
-             */
-            if (s->s3->tmp.cert_req == 1) {
-                s->state = SSL3_ST_CW_CERT_VRFY_A;
-            } else {
-                s->state = SSL3_ST_CW_CHANGE_A;
-            }
-            if (s->s3->flags & TLS1_FLAGS_SKIP_CERT_VERIFY) {
-                s->state = SSL3_ST_CW_CHANGE_A;
-            }
-
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CW_CERT_VRFY_A:
-        case SSL3_ST_CW_CERT_VRFY_B:
-            ret = ssl3_send_client_verify(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CW_CHANGE_A;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CW_CHANGE_A:
-        case SSL3_ST_CW_CHANGE_B:
-            ret = ssl3_send_change_cipher_spec(s,
-                                               SSL3_ST_CW_CHANGE_A,
-                                               SSL3_ST_CW_CHANGE_B);
-            if (ret <= 0)
-                goto end;
-
-#if defined(OPENSSL_NO_NEXTPROTONEG)
-            s->state = SSL3_ST_CW_FINISHED_A;
-#else
-            if (s->s3->next_proto_neg_seen)
-                s->state = SSL3_ST_CW_NEXT_PROTO_A;
-            else
-                s->state = SSL3_ST_CW_FINISHED_A;
-#endif
-            s->init_num = 0;
-
-            s->session->cipher = s->s3->tmp.new_cipher;
-#ifdef OPENSSL_NO_COMP
-            s->session->compress_meth = 0;
-#else
-            if (s->s3->tmp.new_compression == NULL)
-                s->session->compress_meth = 0;
-            else
-                s->session->compress_meth = s->s3->tmp.new_compression->id;
-#endif
-            if (!s->method->ssl3_enc->setup_key_block(s)) {
-                ret = -1;
-                s->state = SSL_ST_ERR;
-                goto end;
-            }
-
-            if (!s->method->ssl3_enc->change_cipher_state(s,
-                                                          SSL3_CHANGE_CIPHER_CLIENT_WRITE))
-            {
-                ret = -1;
-                s->state = SSL_ST_ERR;
-                goto end;
-            }
-
-            break;
-
-#if !defined(OPENSSL_NO_NEXTPROTONEG)
-        case SSL3_ST_CW_NEXT_PROTO_A:
-        case SSL3_ST_CW_NEXT_PROTO_B:
-            ret = ssl3_send_next_proto(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CW_FINISHED_A;
-            break;
-#endif
-
-        case SSL3_ST_CW_FINISHED_A:
-        case SSL3_ST_CW_FINISHED_B:
-            ret = ssl3_send_finished(s,
-                                     SSL3_ST_CW_FINISHED_A,
-                                     SSL3_ST_CW_FINISHED_B,
-                                     s->method->
-                                     ssl3_enc->client_finished_label,
-                                     s->method->
-                                     ssl3_enc->client_finished_label_len);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CW_FLUSH;
-
-            if (s->hit) {
-                s->s3->tmp.next_state = SSL_ST_OK;
-            } else {
-                /*
-                 * Allow NewSessionTicket if ticket expected
-                 */
-                if (s->tlsext_ticket_expected)
-                    s->s3->tmp.next_state = SSL3_ST_CR_SESSION_TICKET_A;
-                else
-                    s->s3->tmp.next_state = SSL3_ST_CR_CHANGE_A;
-            }
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CR_SESSION_TICKET_A:
-        case SSL3_ST_CR_SESSION_TICKET_B:
-            ret = ssl3_get_new_session_ticket(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CR_CHANGE_A;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CR_CERT_STATUS_A:
-        case SSL3_ST_CR_CERT_STATUS_B:
-            ret = ssl3_get_cert_status(s);
-            if (ret <= 0)
-                goto end;
-            s->state = SSL3_ST_CR_KEY_EXCH_A;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CR_CHANGE_A:
-        case SSL3_ST_CR_CHANGE_B:
-            ret = ssl3_get_change_cipher_spec(s, SSL3_ST_CR_CHANGE_A,
-                                              SSL3_ST_CR_CHANGE_B);
-            if (ret <= 0)
-                goto end;
-
-            s->state = SSL3_ST_CR_FINISHED_A;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CR_FINISHED_A:
-        case SSL3_ST_CR_FINISHED_B:
-            ret = ssl3_get_finished(s, SSL3_ST_CR_FINISHED_A,
-                                    SSL3_ST_CR_FINISHED_B);
-            if (ret <= 0)
-                goto end;
-
-            if (s->hit)
-                s->state = SSL3_ST_CW_CHANGE_A;
-            else
-                s->state = SSL_ST_OK;
-            s->init_num = 0;
-            break;
-
-        case SSL3_ST_CW_FLUSH:
-            s->rwstate = SSL_WRITING;
-            if (BIO_flush(s->wbio) <= 0) {
-                ret = -1;
-                goto end;
-            }
-            s->rwstate = SSL_NOTHING;
-            s->state = s->s3->tmp.next_state;
-            break;
-
-        case SSL_ST_OK:
-            /* clean a few things up */
-            ssl3_cleanup_key_block(s);
-            BUF_MEM_free(s->init_buf);
-            s->init_buf = NULL;
-
-            /* remove the buffering */
-            ssl_free_wbio_buffer(s);
-
-            s->init_num = 0;
-            s->renegotiate = 0;
-            s->new_session = 0;
-
-            ssl_update_cache(s, SSL_SESS_CACHE_CLIENT);
-            if (s->hit)
-                s->ctx->stats.sess_hit++;
-
-            ret = 1;
-            /* s->server=0; */
-            s->handshake_func = ssl3_connect;
-            s->ctx->stats.sess_connect_good++;
-
-            if (cb != NULL)
-                cb(s, SSL_CB_HANDSHAKE_DONE, 1);
-
-            goto end;
-            /* break; */
-
-        case SSL_ST_ERR:
-        default:
-            SSLerr(SSL_F_SSL3_CONNECT, SSL_R_UNKNOWN_STATE);
-            ret = -1;
-            goto end;
-            /* break; */
-        }
-
-        /* did we do anything */
-        if (!s->s3->tmp.reuse_message && !skip) {
-            if (s->debug) {
-                if ((ret = BIO_flush(s->wbio)) <= 0)
-                    goto end;
-            }
-
-            if ((cb != NULL) && (s->state != state)) {
-                new_state = s->state;
-                s->state = state;
-                cb(s, SSL_CB_CONNECT_LOOP, 1);
-                s->state = new_state;
-            }
-        }
-        skip = 0;
-    }
- end:
-    s->in_handshake--;
-    BUF_MEM_free(buf);
-    if (cb != NULL)
-        cb(s, SSL_CB_CONNECT_EXIT, ret);
-    return (ret);
-}
-
-#endif /* End temp disabled ssl3_connect */
 /*
  * Work out what version we should be using for the initial ClientHello if
  * the version is currently set to (D)TLS_ANY_VERSION.
@@ -3518,51 +3043,6 @@ int ssl3_check_cert_and_algorithm(SSL *s)
     return (0);
 }
 
-/*
- * Normally, we can tell if the server is resuming the session from
- * the session ID. EAP-FAST (RFC 4851), however, relies on the next server
- * message after the ServerHello to determine if the server is resuming.
- * Therefore, we allow EAP-FAST to peek ahead.
- * ssl3_check_change returns 1 if we are resuming from an external
- * pre-shared secret, we have a "ticket" and the next server message
- * is CCS; and 0 otherwise. It returns -1 upon an error.
- */
- #if 0
- /*
-  * TODO: No longer required. Temporarily kept during state machine development
-  * To be deleted by later commits
-  */
-static int ssl3_check_change(SSL *s)
-{
-    int ok = 0;
-
-    if (s->version < TLS1_VERSION || !s->tls_session_secret_cb ||
-        !s->session->tlsext_tick)
-        return 0;
-
-    /*
-     * This function is called when we might get a Certificate message instead,
-     * so permit appropriate message length.
-     * We ignore the return value as we're only interested in the message type
-     * and not its length.
-     */
-    s->method->ssl_get_message(s,
-                               SSL3_ST_CR_CERT_A,
-                               SSL3_ST_CR_CERT_B,
-                               -1, s->max_cert_list, &ok);
-
-    if (!ok)
-        return -1;
-
-    s->s3->tmp.reuse_message = 1;
-
-    if (s->s3->tmp.message_type == SSL3_MT_CHANGE_CIPHER_SPEC)
-        return 1;
-
-    return 0;
-}
-#endif
-
 #ifndef OPENSSL_NO_NEXTPROTONEG
 int ssl3_send_next_proto(SSL *s)
 {