X-Git-Url: https://git.openssl.org/gitweb/?a=blobdiff_plain;f=CHANGES;h=64ff6e2251987730230a203bcd8efe014bc2ac46;hb=bfaa8a89e1b81fec52cc3fe15d507d838faac467;hp=8a703499f56803ed4351cd18630b7f397ca1cb34;hpb=f14845d99983eee30abe846978fe189d4191e9d9;p=openssl.git

diff --git a/CHANGES b/CHANGES
index 8a703499f5..64ff6e2251 100644
--- a/CHANGES
+++ b/CHANGES
@@ -2,16 +2,150 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.6 and 0.9.7  [xx XXX 2001]
+ Changes between 0.9.7 and 0.9.8  [xx XXX 2002]
+
+  *) Add ECDSA in new directory crypto/ecdsa/.
+
+     Add applications 'openssl ecdsaparam' and 'openssl ecdsa'
+     (these are variants of 'openssl dsaparam' and 'openssl dsa').
+
+     ECDSA support is also included in various other files across the
+     library.  Most notably,
+     - 'openssl req' now has a '-newkey ecdsa:file' option;
+     - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
+     - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
+       d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
+       them suitable for ECDSA where domain parameters must be
+       extracted before the specific public key.
+     [Nils Larsch <nla@trustcenter.de>]
+
+  *) Include some named elliptic curves, and add OIDs from X9.62 and SECG.
+     The curves can be obtained from the new functions
+          EC_GROUP_new_by_nid()
+          EC_GROUP_new_by_name()
+     Also add a 'nid' field to EC_GROUP objects, which can be accessed
+     via
+         EC_GROUP_set_nid()
+         EC_GROUP_get_nid()
+     [Nils Larsch <nla@trustcenter.de, Bodo Moeller]
+ 
+ Changes between 0.9.6 and 0.9.7  [xx XXX 2002]
 
-     OpenSSL 0.9.6a/0.9.6b (bugfix releases, 5 Apr 2001 and 9 July 2001)
-     and OpenSSL 0.9.7 were developed in parallel, based on OpenSSL 0.9.6.  
+     OpenSSL 0.9.6a/0.9.6b/0.9.6c/0.9.6d (bugfix releases, 5 Apr 2001,
+     9 July 2001, 21 Dec 2001 and xx XXX 2002) and OpenSSL 0.9.7 were
+     developed in parallel, based on OpenSSL 0.9.6.  
 
      Change log entries are tagged as follows:
-         -) applies to 0.9.6a/0.9.6b/0.9.6c only
-         *) applies to 0.9.6a/0.9.6b/0.9.6c and 0.9.7
+         -) applies to 0.9.6a ... 0.9.6d only
+         *) applies to 0.9.6a ... 0.9.6d and 0.9.7
          +) applies to 0.9.7 only
 
+  *) Some of the ciphers missed the strength entry (SSL_LOW etc).
+     [Ben Laurie, Lutz Jaenicke]
+
+  +) Add an "init" command to the ENGINE config module and auto initialize
+     ENGINEs. Without any "init" command the ENGINE will be initialized 
+     after all ctrl commands have been executed on it. If init=1 the 
+     ENGINE is initailized at that point (ctrls before that point are run
+     on the uninitialized ENGINE and after on the initialized one). If
+     init=0 then the ENGINE will not be iniatialized at all.
+     [Steve Henson]
+
+  +) Fix the 'app_verify_callback' interface so that the user-defined
+     argument is actually passed to the callback: In the
+     SSL_CTX_set_cert_verify_callback() prototype, the callback
+     declaration has been changed from
+          int (*cb)()
+     into
+          int (*cb)(X509_STORE_CTX *,void *);
+     in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
+          i=s->ctx->app_verify_callback(&ctx)
+     has been changed into
+          i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
+
+     To update applications using SSL_CTX_set_cert_verify_callback(),
+     a dummy argument can be added to their callback functions.
+     [D. K. Smetters <smetters@parc.xerox.com>]
+
+  +) Added the '4758cca' ENGINE to support IBM 4758 cards.
+     [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
+
+  *) Fix bug in SSL_clear(): bad sessions were not removed (found by
+     Yoram Zahavi <YoramZ@gilian.com>).
+     [Lutz Jaenicke]
+
+  +) Add and OPENSSL_LOAD_CONF define which will cause
+     OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
+     This allows older applications to transparently support certain
+     OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
+     Two new functions OPENSSL_add_all_algorithms_noconf() which will never
+     load the config file and OPENSSL_add_all_algorithms_conf() which will
+     always load it have also been added.
+     [Steve Henson]
+
+  +) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
+     Adjust NIDs and EVP layer.
+     [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
+
+  +) Config modules support in openssl utility.
+
+     Most commands now load modules from the config file,
+     though in a few (such as version) this isn't done 
+     because it couldn't be used for anything.
+
+     In the case of ca and req the config file used is
+     the same as the utility itself: that is the -config
+     command line option can be used to specify an
+     alternative file.
+     [Steve Henson]
+
+  +) Move default behaviour from OPENSSL_config(). If appname is NULL
+     use "openssl_conf" if filename is NULL use default openssl config file.
+     [Steve Henson]
+
+  +) Add an argument to OPENSSL_config() to allow the use of an alternative
+     config section name. Add a new flag to tolerate a missing config file
+     and move code to CONF_modules_load_file().
+     [Steve Henson]
+
+  *) Add information about CygWin 1.3 and on, and preserve proper
+     configuration for the versions before that.
+     [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
+
+  *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
+     check whether we deal with a copy of a session and do not delete from
+     the cache in this case. Problem reported by "Izhar Shoshani Levi"
+     <izhar@checkpoint.com>.
+     [Lutz Jaenicke]
+
+  *) Do not store session data into the internal session cache, if it
+     is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
+     flag is set). Proposed by Aslam <aslam@funk.com>.
+     [Lutz Jaenicke]
+
+  +) Support for crypto accelerator cards from Accelerated Encryption
+     Processing, www.aep.ie.  (Use engine 'aep')
+     The support was copied from 0.9.6c [engine] and adapted/corrected
+     to work with the new engine framework.
+     [AEP Inc. and Richard Levitte]
+
+  +) Support for SureWare crypto accelerator cards from Baltimore
+     Technologies.  (Use engine 'sureware')
+     The support was copied from 0.9.6c [engine] and adapted
+     to work with the new engine framework.
+     [Richard Levitte]
+
+  *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
+     value is 0.
+     [Richard Levitte]
+
+  +) Have the CHIL engine fork-safe (as defined by nCipher) and actually
+     make the newer ENGINE framework commands for the CHIL engine work.
+     [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
+
+  +) Make it possible to produce shared libraries on ReliantUNIX.
+     [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
+
   *) Add the configuration target linux-s390x.
      [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
 
@@ -235,8 +369,8 @@
 
   +) Change all functions with names starting with des_ to be starting
      with DES_ instead.  Add wrappers that are compatible with libdes,
-     but are named _old_des_*.  Finally, add macros that map the des_*
-     symbols to the corresponding _old_des_*.
+     but are named _ossl_old_des_*.  Finally, add macros that map the
+     des_* symbols to the corresponding _ossl_old_des_*.
 
      All this is done because there are increasing clashes with libdes
      and other DES libraries that are currently used by other projects.