#! /usr/bin/env perl
-# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2024 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
setup("test_req");
-plan tests => 16;
+plan tests => 49;
-require_ok(srctop_file('test','recipes','tconversion.pl'));
+require_ok(srctop_file('test', 'recipes', 'tconversion.pl'));
+
+my @certs = qw(test certs);
# What type of key to generate?
my @req_new;
note("There should not be more that at most 80 per line");
}
+# Prevent MSys2 filename munging for arguments that look like file paths but
+# aren't
+$ENV{MSYS2_ARG_CONV_EXCL} = "/CN=";
+
# Check for duplicate -addext parameters, and one "working" case.
my @addext_args = ( "openssl", "req", "-new", "-out", "testreq.pem",
+ "-key", srctop_file("test", "certs", "ee-key.pem"),
"-config", srctop_file("test", "test.cnf"), @req_new );
my $val = "subjectAltName=DNS:example.com";
+my $val1 = "subjectAltName=otherName:1.2.3.4;UTF8:test,email:info\@example.com";
my $val2 = " " . $val;
my $val3 = $val;
$val3 =~ s/=/ =/;
ok( run(app([@addext_args, "-addext", $val])));
+ok( run(app([@addext_args, "-addext", $val1])));
+$val1 =~ s/UTF8/XXXX/; # execute the error handling in do_othername
+ok(!run(app([@addext_args, "-addext", $val1])));
ok(!run(app([@addext_args, "-addext", $val, "-addext", $val])));
ok(!run(app([@addext_args, "-addext", $val, "-addext", $val2])));
ok(!run(app([@addext_args, "-addext", $val, "-addext", $val3])));
ok(!run(app([@addext_args, "-addext", $val2, "-addext", $val3])));
+ok(run(app([@addext_args, "-addext", "SXNetID=1:one, 2:two, 3:three"])));
+
+# If a CSR is provided with neither of -key or -CA/-CAkey, this should fail.
+ok(!run(app(["openssl", "req", "-x509",
+ "-in", srctop_file(@certs, "x509-check.csr"),
+ "-out", "testreq.pem"])));
subtest "generating alt certificate requests with RSA" => sub {
plan tests => 3;
subtest "generating certificate requests with RSA" => sub {
- plan tests => 2;
+ plan tests => 8;
SKIP: {
skip "RSA is not supported by this OpenSSL build", 2
if disabled("rsa");
+ ok(!run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsa.pem", "-utf8",
+ "-key", srctop_file("test", "testrsa.pem"),
+ "-keyform", "DER"])),
+ "Checking that mismatching keyform fails");
+
ok(run(app(["openssl", "req",
"-config", srctop_file("test", "test.cnf"),
"-new", "-out", "testreq-rsa.pem", "-utf8",
- "-key", srctop_file("test", "testrsa.pem")])),
+ "-key", srctop_file("test", "testrsa.pem"),
+ "-keyform", "PEM"])),
"Generating request");
ok(run(app(["openssl", "req",
"-config", srctop_file("test", "test.cnf"),
"-verify", "-in", "testreq-rsa.pem", "-noout"])),
"Verifying signature on request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-modulus", "-in", "testreq-rsa.pem", "-noout"])),
+ "Printing a modulus of the request key");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq_withattrs_pem.pem", "-utf8",
+ "-key", srctop_file("test", "testrsa_withattrs.pem")])),
+ "Generating request from a key with extra attributes - PEM");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq_withattrs_pem.pem", "-noout"])),
+ "Verifying signature on request from a key with extra attributes - PEM");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq_withattrs_der.pem", "-utf8",
+ "-key", srctop_file("test", "testrsa_withattrs.der"),
+ "-keyform", "DER"])),
+ "Generating request from a key with extra attributes - PEM");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq_withattrs_der.pem", "-noout"])),
+ "Verifying signature on request from a key with extra attributes - PEM");
+ }
+};
+
+subtest "generating certificate requests with RSA-PSS" => sub {
+ plan tests => 12;
+
+ SKIP: {
+ skip "RSA is not supported by this OpenSSL build", 2
+ if disabled("rsa");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapss.pem", "-utf8",
+ "-key", srctop_file("test", "testrsapss.pem")])),
+ "Generating request");
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-rsapss.pem", "-noout"])),
+ "Verifying signature on request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapss2.pem", "-utf8",
+ "-sigopt", "rsa_padding_mode:pss",
+ "-sigopt", "rsa_pss_saltlen:-1",
+ "-key", srctop_file("test", "testrsapss.pem")])),
+ "Generating request");
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-rsapss2.pem", "-noout"])),
+ "Verifying signature on request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapssmand.pem", "-utf8",
+ "-sigopt", "rsa_padding_mode:pss",
+ "-key", srctop_file("test", "testrsapssmandatory.pem")])),
+ "Generating request");
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-rsapssmand.pem", "-noout"])),
+ "Verifying signature on request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapssmand2.pem", "-utf8",
+ "-sigopt", "rsa_pss_saltlen:100",
+ "-key", srctop_file("test", "testrsapssmandatory.pem")])),
+ "Generating request");
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-rsapssmand2.pem", "-noout"])),
+ "Verifying signature on request");
+
+ ok(!run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapss3.pem", "-utf8",
+ "-sigopt", "rsa_padding_mode:pkcs1",
+ "-key", srctop_file("test", "testrsapss.pem")])),
+ "Generating request with expected failure");
+
+ ok(!run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapss3.pem", "-utf8",
+ "-sigopt", "rsa_pss_saltlen:-5",
+ "-key", srctop_file("test", "testrsapss.pem")])),
+ "Generating request with expected failure");
+
+ ok(!run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapssmand3.pem", "-utf8",
+ "-sigopt", "rsa_pss_saltlen:10",
+ "-key", srctop_file("test", "testrsapssmandatory.pem")])),
+ "Generating request with expected failure");
+
+ ok(!run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsapssmand3.pem", "-utf8",
+ "-sha256",
+ "-key", srctop_file("test", "testrsapssmandatory.pem")])),
+ "Generating request with expected failure");
}
};
plan tests => 2;
ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
+ "-key", srctop_file("test", "certs", "ee-key.pem"),
@req_new, "-out", "testreq.pem"])),
"Generating request");
if disabled("sm2");
ok(run(app(["openssl", "req",
"-config", srctop_file("test", "test.cnf"),
- "-new", "-key", srctop_file("test", "certs", "sm2.key"),
- "-sigopt", "sm2_id:1234567812345678",
+ "-new", "-key", srctop_file(@certs, "sm2.key"),
+ "-sigopt", "distid:1234567812345678",
"-out", "testreq-sm2.pem", "-sm3"])),
"Generating SM2 certificate request");
ok(run(app(["openssl", "req",
"-config", srctop_file("test", "test.cnf"),
"-verify", "-in", "testreq-sm2.pem", "-noout",
- "-sm2-id", "1234567812345678", "-sm3"])),
+ "-vfyopt", "distid:1234567812345678", "-sm3"])),
"Verifying signature on SM2 certificate request");
ok(run(app(["openssl", "req",
"-config", srctop_file("test", "test.cnf"),
- "-new", "-key", srctop_file("test", "certs", "sm2.key"),
- "-sigopt", "sm2_hex_id:DEADBEEF",
+ "-new", "-key", srctop_file(@certs, "sm2.key"),
+ "-sigopt", "hexdistid:DEADBEEF",
"-out", "testreq-sm2.pem", "-sm3"])),
"Generating SM2 certificate request with hex id");
ok(run(app(["openssl", "req",
"-config", srctop_file("test", "test.cnf"),
"-verify", "-in", "testreq-sm2.pem", "-noout",
- "-sm2-hex-id", "DEADBEEF", "-sm3"])),
+ "-vfyopt", "hexdistid:DEADBEEF", "-sm3"])),
"Verifying signature on SM2 certificate request");
}
};
plan skip_all => "skipping req conversion test for $reqfile"
if grep /Unknown Public Key/, map { s/\R//; } <DATA>;
- tconversion("req", $reqfile, @openssl_args);
+ tconversion( -type => 'req', -in => $reqfile,
+ -args => [ @openssl_args ] );
}
close DATA;
unlink "req-check.err";
done_testing();
};
}
+
+# Test both generation and verification of certs w.r.t. RFC 5280 requirements
+
+my $ca_cert; # will be set below
+sub generate_cert {
+ my $cert = shift @_;
+ my $ss = $cert =~ m/self-signed/;
+ my $is_ca = $cert =~ m/CA/;
+ my $cn = $is_ca ? "CA" : "EE";
+ my $ca_key = srctop_file(@certs, "ca-key.pem");
+ my $key = $is_ca ? $ca_key : srctop_file(@certs, "ee-key.pem");
+ my @cmd = ("openssl", "req", "-config", "", "-x509",
+ "-subj", "/CN=$cn", @_, "-out", $cert);
+ push(@cmd, ("-key", $key)) if $ss;
+ push(@cmd, ("-CA", $ca_cert, "-CAkey", $ca_key)) unless $ss;
+ ok(run(app([@cmd])), "generate $cert");
+}
+sub has_SKID {
+ my $cert = shift @_;
+ my $expect = shift @_;
+ cert_contains($cert, "Subject Key Identifier", $expect);
+}
+sub has_AKID {
+ my $cert = shift @_;
+ my $expect = shift @_;
+ cert_contains($cert, "Authority Key Identifier", $expect);
+}
+sub has_keyUsage {
+ my $cert = shift @_;
+ my $expect = shift @_;
+ cert_contains($cert, "Key Usage", $expect);
+}
+sub strict_verify {
+ my $cert = shift @_;
+ my $expect = shift @_;
+ my $trusted = shift @_;
+ $trusted = $cert unless $trusted;
+ ok(run(app(["openssl", "verify", "-x509_strict", "-trusted", $trusted,
+ "-partial_chain", $cert])) == $expect,
+ "strict verify allow $cert");
+}
+
+my @v3_ca = ("-addext", "basicConstraints = critical,CA:true",
+ "-addext", "keyUsage = keyCertSign");
+my $SKID_AKID = "subjectKeyIdentifier,authorityKeyIdentifier";
+my $cert = "self-signed_v1_CA_no_KIDs.pem";
+generate_cert($cert);
+cert_ext_has_n_different_lines($cert, 0, $SKID_AKID); # no SKID and no AKID
+#TODO strict_verify($cert, 1); # self-signed v1 root cert should be accepted as CA
+
+$ca_cert = "self-signed_v3_CA_default_SKID.pem";
+generate_cert($ca_cert, @v3_ca);
+has_SKID($ca_cert, 1);
+has_AKID($ca_cert, 0);
+strict_verify($ca_cert, 1);
+
+$cert = "self-signed_v3_CA_no_SKID.pem";
+generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = none");
+cert_ext_has_n_different_lines($cert, 0, $SKID_AKID); # no SKID and no AKID
+#TODO strict_verify($cert, 0);
+
+$cert = "self-signed_v3_CA_both_KIDs.pem";
+generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = hash",
+ "-addext", "authorityKeyIdentifier = keyid:always");
+cert_ext_has_n_different_lines($cert, 3, $SKID_AKID); # SKID == AKID
+strict_verify($cert, 1);
+
+$cert = "self-signed_v3_EE_wrong_keyUsage.pem";
+generate_cert($cert, "-addext", "keyUsage = keyCertSign");
+#TODO strict_verify($cert, 1); # should be accepted because RFC 5280 does not apply
+
+$cert = "v3_EE_default_KIDs.pem";
+generate_cert($cert, "-addext", "keyUsage = dataEncipherment",
+ "-key", srctop_file(@certs, "ee-key.pem"));
+cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
+strict_verify($cert, 1, $ca_cert);
+
+$cert = "v3_EE_no_AKID.pem";
+generate_cert($cert, "-addext", "authorityKeyIdentifier = none",
+ "-key", srctop_file(@certs, "ee-key.pem"));
+has_SKID($cert, 1);
+has_AKID($cert, 0);
+strict_verify($cert, 0, $ca_cert);
+
+$cert = "self-issued_v3_EE_default_KIDs.pem";
+generate_cert($cert, "-addext", "keyUsage = dataEncipherment",
+ "-in", srctop_file(@certs, "x509-check.csr"));
+cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
+strict_verify($cert, 1);
+
+my $cert = "self-signed_CA_no_keyUsage.pem";
+generate_cert($cert, "-in", srctop_file(@certs, "ext-check.csr"));
+has_keyUsage($cert, 0);
+my $cert = "self-signed_CA_with_keyUsages.pem";
+generate_cert($cert, "-in", srctop_file(@certs, "ext-check.csr"),
+ "-copy_extensions", "copy");
+has_keyUsage($cert, 1);
+
+# Generate cert using req with '-modulus'
+ok(run(app(["openssl", "req", "-x509", "-new", "-days", "365",
+ "-key", srctop_file("test", "testrsa.pem"),
+ "-config", srctop_file('test', 'test.cnf'),
+ "-out", "testreq-cert.pem",
+ "-modulus"])), "cert req creation - with -modulus");
+
+# Verify cert
+ok(run(app(["openssl", "x509", "-in", "testreq-cert.pem",
+ "-noout", "-text"])), "cert verification");
projects / openssl.git / blobdiff