#include <openssl/e_os2.h>
-/* conflicts with winsock2 stuff on netware */
-#if !defined(OPENSSL_SYS_NETWARE)
-# include <sys/types.h>
-#endif
-
/*
* With IPv6, it looks like Digital has mixed up the proper order of
* recursive header file inclusion, resulting in the compiler complaining
#include "s_apps.h"
#include "timeouts.h"
-#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
-/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
-# undef FIONBIO
-#endif
-
static int not_resumable_sess_cb(SSL *s, int is_forward_secure);
static int sv_body(int s, int stype, unsigned char *context);
static int www_body(int s, int stype, unsigned char *context);
static const char *s_cert_file2 = TEST_CERT2, *s_key_file2 = NULL;
static char *s_dcert_file = NULL, *s_dkey_file = NULL, *s_dchain_file = NULL;
-#ifdef FIONBIO
static int s_nbio = 0;
-#endif
static int s_nbio_test = 0;
static int s_crlf = 0;
static SSL_CTX *ctx = NULL;
static int keymatexportlen = 20;
static int async = 0;
+static unsigned int split_send_fragment = 0;
+static unsigned int max_pipelines = 0;
#ifndef OPENSSL_NO_ENGINE
static char *engine_id = NULL;
s_quiet = 0;
s_brief = 0;
async = 0;
+ split_send_fragment = 0;
+ max_pipelines = 0;
#ifndef OPENSSL_NO_ENGINE
engine_id = NULL;
#endif
/* This the context that we pass to alpn_cb */
typedef struct tlsextalpnctx_st {
unsigned char *data;
- unsigned short len;
+ size_t len;
} tlsextalpnctx;
static int alpn_cb(SSL *s, const unsigned char **out, unsigned char *outlen,
if (!s_quiet) {
/* We can assume that |in| is syntactically valid. */
- unsigned i;
+ unsigned int i;
BIO_printf(bio_s_out, "ALPN protocols advertised by the client: ");
for (i = 0; i < inlen;) {
if (i)
OPT_QUIET, OPT_BRIEF, OPT_NO_DHE,
OPT_NO_RESUME_EPHEMERAL, OPT_PSK_HINT, OPT_PSK, OPT_SRPVFILE,
OPT_SRPUSERSEED, OPT_REV, OPT_WWW, OPT_UPPER_WWW, OPT_HTTP, OPT_ASYNC,
- OPT_SSL_CONFIG, OPT_SSL3,
- OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1,
+ OPT_SSL_CONFIG, OPT_SPLIT_SEND_FRAG, OPT_MAX_PIPELINES, OPT_READ_BUF,
+ OPT_SSL3, OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1,
OPT_DTLS1_2, OPT_TIMEOUT, OPT_MTU, OPT_CHAIN, OPT_LISTEN,
OPT_ID_PREFIX, OPT_RAND, OPT_SERVERNAME, OPT_SERVERNAME_FATAL,
OPT_CERT2, OPT_KEY2, OPT_NEXTPROTONEG, OPT_ALPN,
{"async", OPT_ASYNC, '-', "Operate in asynchronous mode"},
{"ssl_config", OPT_SSL_CONFIG, 's', \
"Configure SSL_CTX using the configuration 'val'"},
+ {"split_send_frag", OPT_SPLIT_SEND_FRAG, 'n',
+ "Size used to split data for encrypt pipelines"},
+ {"max_pipelines", OPT_MAX_PIPELINES, 'n',
+ "Maximum number of encrypt/decrypt pipelines to be used"},
+ {"read_buf", OPT_READ_BUF, 'n',
+ "Default read buffer size to be used for connections"},
OPT_S_OPTIONS,
OPT_V_OPTIONS,
OPT_X_OPTIONS,
-#ifdef FIONBIO
{"nbio", OPT_NBIO, '-', "Use non-blocking IO"},
-#endif
#ifndef OPENSSL_NO_PSK
{"psk_hint", OPT_PSK_HINT, 's', "PSK identity hint to use"},
{"psk", OPT_PSK, 's', "PSK in hex (without 0x)"},
#ifndef OPENSSL_NO_SRTP
{"use_srtp", OPT_SRTP_PROFILES, 's',
"Offer SRTP key management with a colon-separated profile list"},
+#endif
{"alpn", OPT_ALPN, 's',
"Set the advertised protocols for the ALPN extension (comma-separated list)"},
-#endif
#ifndef OPENSSL_NO_ENGINE
{"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
#endif
X509 *s_cert2 = NULL;
tlsextctx tlsextcbp = { NULL, NULL, SSL_TLSEXT_ERR_ALERT_WARNING };
const char *ssl_config = NULL;
+ int read_buf_len = 0;
#ifndef OPENSSL_NO_NEXTPROTONEG
const char *next_proto_neg_in = NULL;
tlsextnextprotoctx next_proto = { NULL, 0 };
char *srpuserseed = NULL;
char *srp_verifier_file = NULL;
#endif
+ int min_version = 0, max_version = 0;
local_argc = argc;
local_argv = argv;
case OPT_TRACE:
#ifndef OPENSSL_NO_SSL_TRACE
s_msg = 2;
-#else
- break;
#endif
+ break;
case OPT_SECURITY_DEBUG:
sdebug = 1;
break;
case OPT_SRPVFILE:
#ifndef OPENSSL_NO_SRP
srp_verifier_file = opt_arg();
- meth = TLSv1_server_method();
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
#endif
break;
case OPT_SRPUSERSEED:
#ifndef OPENSSL_NO_SRP
srpuserseed = opt_arg();
- meth = TLSv1_server_method();
+ if (min_version < TLS1_VERSION)
+ min_version = TLS1_VERSION;
#endif
break;
case OPT_REV:
ssl_config = opt_arg();
break;
case OPT_SSL3:
-#ifndef OPENSSL_NO_SSL3
- meth = SSLv3_server_method();
-#endif
+ min_version = SSL3_VERSION;
+ max_version = SSL3_VERSION;
break;
case OPT_TLS1_2:
-#ifndef OPENSSL_NO_TLS1_2
- meth = TLSv1_2_server_method();
-#endif
+ min_version = TLS1_2_VERSION;
+ max_version = TLS1_2_VERSION;
break;
case OPT_TLS1_1:
-#ifndef OPENSSL_NO_TLS1_1
- meth = TLSv1_1_server_method();
-#endif
+ min_version = TLS1_1_VERSION;
+ max_version = TLS1_1_VERSION;
break;
case OPT_TLS1:
-#ifndef OPENSSL_NO_TLS1
- meth = TLSv1_server_method();
-#endif
+ min_version = TLS1_VERSION;
+ max_version = TLS1_VERSION;
break;
case OPT_DTLS:
#ifndef OPENSSL_NO_DTLS
#endif
break;
case OPT_DTLS1:
-#ifndef OPENSSL_NO_DTLS1
- meth = DTLSv1_server_method();
+#ifndef OPENSSL_NO_DTLS
+ meth = DTLS_server_method();
+ min_version = DTLS1_VERSION;
+ max_version = DTLS1_VERSION;
socket_type = SOCK_DGRAM;
#endif
break;
case OPT_DTLS1_2:
-#ifndef OPENSSL_NO_DTLS1_2
- meth = DTLSv1_2_server_method();
+#ifndef OPENSSL_NO_DTLS
+ meth = DTLS_server_method();
+ min_version = DTLS1_2_VERSION;
+ max_version = DTLS1_2_VERSION;
socket_type = SOCK_DGRAM;
#endif
break;
alpn_in = opt_arg();
break;
case OPT_SRTP_PROFILES:
+#ifndef OPENSSL_NO_SRTP
srtp_profiles = opt_arg();
+#endif
break;
case OPT_KEYMATEXPORT:
keymatexportlabel = opt_arg();
case OPT_ASYNC:
async = 1;
break;
+ case OPT_SPLIT_SEND_FRAG:
+ split_send_fragment = atoi(opt_arg());
+ if (split_send_fragment == 0) {
+ /*
+ * Not allowed - set to a deliberately bad value so we get an
+ * error message below
+ */
+ split_send_fragment = SSL3_RT_MAX_PLAIN_LENGTH + 1;
+ }
+ break;
+ case OPT_MAX_PIPELINES:
+ max_pipelines = atoi(opt_arg());
+ break;
+ case OPT_READ_BUF:
+ read_buf_len = atoi(opt_arg());
+ break;
+
}
}
argc = opt_num_rest();
}
#endif
+ if (split_send_fragment > SSL3_RT_MAX_PLAIN_LENGTH) {
+ BIO_printf(bio_err, "Bad split send fragment size\n");
+ goto end;
+ }
+
+ if (max_pipelines > SSL_MAX_PIPELINES) {
+ BIO_printf(bio_err, "Bad max pipelines value\n");
+ goto end;
+ }
+
if (!app_passwd(passarg, dpassarg, &pass, &dpass)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
#if !defined(OPENSSL_NO_NEXTPROTONEG)
if (next_proto_neg_in) {
- unsigned short len;
+ size_t len;
next_proto.data = next_protos_parse(&len, next_proto_neg_in);
if (next_proto.data == NULL)
goto end;
#endif
alpn_ctx.data = NULL;
if (alpn_in) {
- unsigned short len;
+ size_t len;
alpn_ctx.data = next_protos_parse(&len, alpn_in);
if (alpn_ctx.data == NULL)
goto end;
goto end;
}
}
+ if (SSL_CTX_set_min_proto_version(ctx, min_version) == 0)
+ goto end;
+ if (SSL_CTX_set_max_proto_version(ctx, max_version) == 0)
+ goto end;
if (session_id_prefix) {
if (strlen(session_id_prefix) >= 32)
if (async) {
SSL_CTX_set_mode(ctx, SSL_MODE_ASYNC);
}
+ if (split_send_fragment > 0) {
+ SSL_CTX_set_split_send_fragment(ctx, split_send_fragment);
+ }
+ if (max_pipelines > 0) {
+ SSL_CTX_set_max_pipelines(ctx, max_pipelines);
+ }
+
+ if (read_buf_len > 0) {
+ SSL_CTX_set_default_read_buffer_len(ctx, read_buf_len);
+ }
#ifndef OPENSSL_NO_SRTP
if (srtp_profiles != NULL) {
SSL *con = NULL;
BIO *sbio;
struct timeval timeout;
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
struct timeval tv;
#else
struct timeval *timeoutp;
#endif
buf = app_malloc(bufsize, "server buffer");
-#ifdef FIONBIO
if (s_nbio) {
- unsigned long sl = 1;
-
- if (!s_quiet)
- BIO_printf(bio_err, "turning on non blocking io\n");
- if (BIO_socket_ioctl(s, FIONBIO, &sl) < 0)
+ if (!BIO_socket_nbio(s, 1))
ERR_print_errors(bio_err);
+ else if (!s_quiet)
+ BIO_printf(bio_err, "Turned on non blocking io\n");
}
-#endif
if (con == NULL) {
con = SSL_new(ctx);
int read_from_sslcon;
read_from_terminal = 0;
- read_from_sslcon = SSL_pending(con)
+ read_from_sslcon = SSL_has_pending(con)
|| (async && SSL_waiting_for_async(con));
if (!read_from_sslcon) {
FD_ZERO(&readfds);
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
openssl_fdset(fileno(stdin), &readfds);
#endif
openssl_fdset(s, &readfds);
* if you do have a cast then you can either go for (int *) or
* (void *).
*/
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
/*
* Under DOS (non-djgpp) and Windows we can't select on stdin:
* only on sockets. As a workaround we timeout the select every
if ((i <= 0) || (buf[0] == 'Q')) {
BIO_printf(bio_s_out, "DONE\n");
(void)BIO_flush(bio_s_out);
- SHUTDOWN(s);
+ BIO_closesocket(s);
close_accept_socket();
ret = -11;
goto err;
BIO_printf(bio_s_out, "DONE\n");
(void)BIO_flush(bio_s_out);
if (SSL_version(con) != DTLS1_VERSION)
- SHUTDOWN(s);
+ BIO_closesocket(s);
/*
* close_accept_socket(); ret= -11;
*/
ascii2ebcdic(buf, buf, i);
#endif
raw_write_stdout(buf, (unsigned int)i);
- if (SSL_pending(con))
+ if (SSL_has_pending(con))
goto again;
break;
case SSL_ERROR_WANT_ASYNC:
{
BIO_printf(bio_err, "shutdown accept socket\n");
if (accept_socket >= 0) {
- SHUTDOWN2(accept_socket);
+ BIO_closesocket(accept_socket);
}
}
X509_NAME_oneline(X509_get_issuer_name(peer), buf, sizeof buf);
BIO_printf(bio_s_out, "issuer=%s\n", buf);
X509_free(peer);
+ peer = NULL;
}
if (SSL_get_shared_ciphers(con, buf, sizeof buf) != NULL)
if ((io == NULL) || (ssl_bio == NULL))
goto err;
-#ifdef FIONBIO
if (s_nbio) {
- unsigned long sl = 1;
-
- if (!s_quiet)
- BIO_printf(bio_err, "turning on non blocking io\n");
- if (BIO_socket_ioctl(s, FIONBIO, &sl) < 0)
+ if (!BIO_socket_nbio(s, 1))
ERR_print_errors(bio_err);
+ else if (!s_quiet)
+ BIO_printf(bio_err, "Turned on non blocking io\n");
}
-#endif
/* lets make the output buffer a reasonable size */
if (!BIO_set_write_buffer_size(io, bufsize))
continue;
}
#endif
-#if defined(OPENSSL_SYS_NETWARE)
- delay(1000);
-#elif !defined(OPENSSL_SYS_MSDOS)
+#if !defined(OPENSSL_SYS_MSDOS)
sleep(1);
#endif
continue;
if (((www == 1) && (strncmp("GET ", buf, 4) == 0)) ||
((www == 2) && (strncmp("GET /stats ", buf, 11) == 0))) {
char *p;
- X509 *peer;
+ X509 *peer = NULL;
STACK_OF(SSL_CIPHER) *sk;
static const char *space = " ";
goto err;
}
/*
- * We're not acutally expecting any data here and we ignore
+ * We're not actually expecting any data here and we ignore
* any that is sent. This is just to force the handshake that
* we're expecting to come from the client. If they haven't
* sent one there's not much we can do.
"HTTP/1.0 200 ok\r\nContent-type: text/html\r\n\r\n");
BIO_puts(io, "<HTML><BODY BGCOLOR=\"#ffffff\">\n");
BIO_puts(io, "<pre>\n");
-/* BIO_puts(io,OpenSSL_version(OPENSSL_VERSION));*/
+ /* BIO_puts(io, OpenSSL_version(OPENSSL_VERSION)); */
BIO_puts(io, "\n");
for (i = 0; i < local_argc; i++) {
const char *myp;
BIO_printf(io, "Client certificate\n");
X509_print(io, peer);
PEM_write_bio_X509(io, peer);
+ X509_free(peer);
+ peer = NULL;
} else
BIO_puts(io, "no client certificate available\n");
BIO_puts(io, "</BODY></HTML>\r\n\r\n");
continue;
}
#endif
-#if defined(OPENSSL_SYS_NETWARE)
- delay(1000);
-#elif !defined(OPENSSL_SYS_MSDOS)
+#if !defined(OPENSSL_SYS_MSDOS)
sleep(1);
#endif
continue;
projects / openssl.git / blobdiff