=================
This document describes installation on all supported operating
-systems (the Unix/Linux family, including macOS), OpenVMS,
-and Windows).
+systems: the Unix/Linux family (including macOS), OpenVMS,
+and Windows.
Table of Contents
=================
$ nmake install
-The easiest way to elevate the Command Prompt is to press and hold down
-the both the `<CTRL>` and `<SHIFT>` key while clicking the menu item in the
-task menu.
+The easiest way to elevate the Command Prompt is to press and hold down both
+the `<CTRL>` and `<SHIFT>` keys while clicking the menu item in the task menu.
The default installation location is
Build the OpenSSL libraries to support the API for the specified version.
If [no-deprecated](#no-deprecated) is also given, don't build with support
for deprecated APIs in or below the specified version number. For example,
-addding
+adding
--api=1.1.0 no-deprecated
The name of the directory under the top of the installation directory tree
(see the `--prefix` option) where libraries will be installed. By default
-this is `lib/`. Note that on Windows only static libraries (`*.lib`) will
+this is `lib`. Note that on Windows only static libraries (`*.lib`) will
be stored in this location. Shared libraries (`*.dll`) will always be
-installed to the `bin/` directory.
+installed to the `bin` directory.
+
+Some build targets have a multilib postfix set in the build configuration.
+For these targets the default libdir is `lib<multilib-postfix>`. Please use
+`--libdir=lib` to override the libdir if adding the postfix is undesirable.
### openssldir
### rdcpu
-Use the `RDSEED` or `RDRAND` command if provided by the CPU.
+Use the `RDSEED` or `RDRAND` command on x86 or `RNDRRS` command on aarch64
+if provided by the CPU.
### librandom
Do not build support for async operations.
+### no-atexit
+
+Do not use `atexit()` in libcrypto builds.
+
+`atexit()` has varied semantics between platforms and can cause SIGSEGV in some
+circumstances. This option disables the atexit registration of OPENSSL_cleanup.
+
### no-autoalginit
Don't automatically load all supported ciphers and digests.
Use the specified text instead of the default banner at the end of
configuration.
+### --w
+
+On platforms where the choice of 32-bit or 64-bit architecture
+is not explicitly specified, `Configure` will print a warning
+message and wait for a few seconds to let you interrupt the
+configuration. Using this flag skips the wait.
+
### no-bulk
Build only some minimal set of features.
This is so that libcrypto and libssl can be properly cleaned up automatically
via an `atexit()` handler. The handler is registered by libcrypto and cleans
up both libraries. On some platforms the `atexit()` handler will run on unload of
-libcrypto (if it has been dynamically loaded) rather than at process exit. This
-option can be used to stop OpenSSL from attempting to stay in memory until the
+libcrypto (if it has been dynamically loaded) rather than at process exit.
+
+This option can be used to stop OpenSSL from attempting to stay in memory until the
process exits. This could lead to crashes if either libcrypto or libssl have
already been unloaded at the point that the atexit handler is invoked, e.g. on a
platform which calls `atexit()` on unload of the library, and libssl is unloaded
-before libcrypto then a crash is likely to happen. Applications can suppress
-running of the `atexit()` handler at run time by using the
-`OPENSSL_INIT_NO_ATEXIT` option to `OPENSSL_init_crypto()`.
+before libcrypto then a crash is likely to happen.
+
+Note that shared library pinning is not automatically disabled for static builds,
+i.e., `no-shared` does not imply `no-pinshared`. This may come as a surprise when
+linking libcrypto statically into a shared third-party library, because in this
+case the shared library will be pinned. To prevent this behaviour, you need to
+configure the static build using `no-shared` and `no-pinshared` together.
+
+Applications can suppress running of the `atexit()` handler at run time by
+using the `OPENSSL_INIT_NO_ATEXIT` option to `OPENSSL_init_crypto()`.
See the man page for it for further details.
### no-posix-io
"audience" running such kernel, consider `no-sse2`. Both the `386` and `no-asm`
options imply `no-sse2`.
-### enable-ssl-trace
+### no-ssl-trace
+
+Don't build with SSL Trace capabilities.
-Build with the SSL Trace capabilities.
+This removes the `-trace` option from `s_client` and `s_server`, and omits the
+`SSL_trace()` function from libssl.
-This adds the `-trace` option to `s_client` and `s_server`.
+Disabling `ssl-trace` may provide a small reduction in libssl binary size.
### no-static-engine
### no-{protocol}-method
- no-{ssl|ssl3|tls|tls1|tls1_1|tls1_2|tls1_3|dtls|dtls1|dtls1_2}-method
+ no-{ssl3|tls1|tls1_1|tls1_2|dtls1|dtls1_2}-method
Analogous to `no-{protocol}` but in addition do not build the methods for
applications to explicitly select individual protocol versions. Note that there
Additional options that are not otherwise recognised are passed through as
they are to the compiler as well. Unix-style options beginning with a
-`-` or `+` and Windows-style options beginning with a `/` are recognized.
+`-` or `+` and Windows-style options beginning with a `/` are recognised.
Again, consult your compiler documentation.
If the option contains arguments separated by spaces, then the URL-style
### Automatic Configuration
-On some platform a `config` script is available which attempts to guess
-your operating system (and compiler, if necessary) and calls the `Configure`
-Perl script with appropriate target based on its guess. Further options can
-be supplied to the `config` script, which will be passed on to the `Configure`
-script.
+In previous version, the `config` script determined the platform type and
+compiler and then called `Configure`. Starting with this release, they are
+the same.
#### Unix / Linux / macOS
and defines various macros in `include/openssl/configuration.h` (generated
from `include/openssl/configuration.h.in`.
+If none of the generated build files suit your purpose, it's possible to
+write your own build file template and give its name through the environment
+variable `BUILDFILE`. For example, Ninja build files could be supported by
+writing `Configurations/build.ninja.tmpl` and then configure with `BUILDFILE`
+set like this (Unix syntax shown, you'll have to adapt for other platforms):
+
+ $ BUILDFILE=build.ninja perl Configure [options...]
+
### Out of Tree Builds
OpenSSL can be configured to build in a build directory separate from the
"--cross-compile-prefix" Configure flag described above. If both
are set then the Configure flag takes precedence.
+ HASHBANGPERL
+ The command string for the Perl executable to insert in the
+ #! line of perl scripts that will be publicly installed.
+ Default: /usr/bin/env perl
+ Note: the value of this variable is added to the same scripts
+ on all platforms, but it's only relevant on Unix-like platforms.
+
+ KERNEL_BITS
+ This can be the value `32` or `64` to specify the architecture
+ when it is not "obvious" to the configuration. It should generally
+ not be necessary to specify this environment variable.
+
NM
The name of the nm executable to use.
Only needed if builing should use a different Perl executable
than what is used to run the Configure script.
- HASHBANGPERL
- The command string for the Perl executable to insert in the
- #! line of perl scripts that will be publicly installed.
- Default: /usr/bin/env perl
- Note: the value of this variable is added to the same scripts
- on all platforms, but it's only relevant on Unix-like platforms.
+ RANLIB
+ The name of the ranlib executable to use.
RC
The name of the rc executable to use. The default will be as
variable is synonymous to this. If both are defined then RC
takes precedence.
- RANLIB
- The name of the ranlib executable to use.
-
WINDRES
See RC.
Along with a short description of the bug, please provide the complete
configure command line and the relevant output including the error message.
-Note: To make the output readable, pleace add a 'code fence' (three backquotes
+Note: To make the output readable, please add a 'code fence' (three backquotes
` ``` ` on a separate line) before and after your output:
```
projects / openssl.git / blobdiff